ERC NEWS                                                       -*- outline -*-

Copyright (C) 2006-2022 Free Software Foundation, Inc.
See the end of the file for license conditions.

Please send ERC bug reports to 'bug-gnu-emacs@gnu.org',
and Cc the 'emacs-erc@gnu.org' mailing list as well.
If possible, use 'M-x erc-bug' or 'M-x report-emacs-bug'.

This file is about changes in ERC, the powerful, modular, and
extensible IRC (Internet Relay Chat) client distributed with
GNU Emacs since Emacs version 22.1.

\f
* Changes in ERC 5.5

** Smarter buffer naming for withstanding collisions.
ERC buffers now remain tied to their logical network contexts, even
while offline.  These associations can survive regional server changes
and the intercession of proxies.  As has long been practiced in other
areas of Emacs, "uniquified" buffer renaming prevents collisions
between buffers of different contexts.  Potential avenues for
confusion remain but will die out with the adoption of emerging
protocol extensions.

** Option 'erc-rename-buffers' deprecated.
The promise of its old "on" state are now fully realized and enabled
permanently by default.  Its old behavior when disabled has been
preserved and will remain available (with warnings) for years to come.

** Option 'erc-reuse-buffers' deprecated.
This ancient option has been a constant source of confusion, as
exhibited most recently when its "disabled" meaning was partially
inverted.  Introduced in ERC 5.4 (Emacs 28.1), this regression saw
existing channel buffers transparently reassociated instead of created
anew.  The pre-5.4 "disabled" behavior has been restored and will
remain accessible for the foreseeable future, warts and all (e.g.,
with its often superfluous "/DIALED-HOST" suffixing always present).

** Convention adopted for auditioning edge functionality.
Objects bearing names like "erc--X-foo" or "erc-somemod--X-foo" will
be offered as trial balloons for potential export and as stopgaps for
overdue but immature fixes and features.  (If you dare try them,
please give feedback!)  This move comes out of desperation as we focus
on much needed internal remediation while trying to meet baseline
expectations in the face of mounting pressure from networks and users.

** Tighter auth-source integration with bigger changes on the horizon.
The days of hit-and-miss auth-source queries are hopefully behind us.
With the overhaul of the services module temporarily shelved and the
transition to SASL-based authentication still underway, users may feel
left in the lurch to endure yet another release cycle of backtick
hell.  For some, auth-source may provide a workaround in the form of
nonstandard server passwords.  See the "Connection" node in the manual
under the subheading "Password".  If you require SASL immediately,
please participate in ERC development by volunteering to try (and give
feedback on) edge features, one of which is SASL.  All known external
offerings, past and present, are makeshift efforts whose use is
discouraged.  This includes the instructions on Libera.Chat's website.

** Username argument for entry point commands.
Commands 'erc' and 'erc-tls' now accept a ':user' keyword argument,
which, when present, becomes the first argument passed to the "USER"
IRC command.  The traditional way of setting this globally, via
'erc-email-userid', is still honored.

** Additional display options for updated buffers.
Additional flexibility is now available for controlling the behavior
of newly created target buffers, especially during reconnection.

** Miscellaneous behavioral changes impacting the user experience.
A bug has been fixed that saw prompts being mangled, doubled, or
erased in server buffers upon disconnection.  Instead, prompts now
collapse into an alternate form designated by the option
'erc-prompt-hidden'.  Behavior differs for query and channel buffers
but can be fine-tuned via the repurposed, formerly abandoned option
'erc-hide-prompt'.

A bug has been fixed affecting users of the Soju bouncer: outgoing
messages during periods of heavy traffic no longer disappear.

Although rare, server passwords containing white space are now handled
correctly.

** Miscellaneous behavioral changes in the library API.
The function 'erc-network' always returns non-nil in server and target
buffers belonging to a successfully established IRC connection, even
after that connection is closed.  In 5.4, support for network symbols
as keys was added for 'erc-autojoin-channels-alist'.  This has been
extended to include explicit symbols passed to 'erc-tls' and 'erc' as
so-called network-context identifiers via a new ':id' keyword.  The
latter carries wider significance beyond autojoin and can be used for
uniquely and unequivocally identifying a connection.  The function
'erc-auto-query', unused internally, and basically inscrutable when
read, has been deprecated with no public replacement.  Which raises
the issue: if you use ERC as a library and need something that's only
offered internally, please lobby for its exporting by writing to
emacs-erc@gnu.org.

\f
* Changes in ERC 5.4.1

** No user-visible changes since ERC 5.4, but a few tweaks in some ERC
file headers and the ERC manual in order to successfully build ERC for
GNU ELPA.  (See below for the news item of ERC now being distributed
on GNU ELPA in addition to its continued inclusion in GNU Emacs core.)

\f
* Changes in ERC 5.4

** Starting with Emacs 28.1 and ERC 5.4, ERC NEWS are added here again.
After ERC 5.3, since November 2012, ERC's NEWS items were added in the
main Emacs NEWS file, and users were referred to there.  Now, starting
with Emacs 28.1 and ERC 5.4, which mark ERC's release to GNU ELPA, ERC
NEWS have been moved to this file again, so that we can include a NEWS
file consisting only of ERC changes in ERC's package on GNU ELPA.

The NEWS entries for ERC changes in Emacs 28.1 have been moved from
the main Emacs NEWS file to here.  For ERC NEWS entries corresponding
to Emacs versions before 28, to avoid modifying the NEWS file for all
of those releases, the ERC NEWS entries have only been copied below,
and the NEWS.* files were left intact.

** ERC is now available on GNU ELPA.
Starting with ERC 5.4, in addition to being distributed with GNU Emacs
itself, ERC is also included in GNU ELPA, allowing users to enjoy the
improvements of newer ERC versions on older Emacs versions as well.

ERC's package page on GNU ELPA: https://elpa.gnu.org/packages/erc.html

** New option 'erc-rename-buffers'.

** New faces 'erc-my-nick-prefix-face' and 'erc-nick-prefix-face'.

** 'erc-format-@nick' displays all user modes instead of only op and voice.

** The display of irc commands in the current buffer has been disabled.

** 'erc-version' now follows the Emacs version.

** ERC can now hide message types by network or channel.
'erc-hide-list' will hide all messages of the specified type, while
'erc-network-hide-list' and 'erc-channel-hide-list' will only hide the
specified message types for the respective specified targets.

** Reconnection is now asynchronous.

** Nick completion is now case-insensitive again after inadvertently
being made case-sensitive in Emacs 24.2.

** New variable 'erc-default-port-tls' used to connect to TLS IRC
servers.

** New hook 'erc-insert-done-hook'.
This hook is called after strings have been inserted into the buffer,
and is free to alter point and window configurations, as it's not
called from inside a 'save-excursion', as opposed to 'erc-insert-post-hook'.

** 'erc-button-google-url' has been renamed to 'erc-button-search-url'
and its value has been changed to Duck Duck Go.

** 'erc-send-pre-hook' and 'erc-send-this' have been obsoleted.
The user option to use instead to alter text to be sent is now
'erc-pre-send-functions'.

** Improve matching/highlighting of nicknames.
Open and close parenthesis and apostrophe are not considered valid
nick characters anymore, matching the given grammar in RFC 2812
section 2.3.1.  This enables correct matching and highlighting of
nicks when they are surrounded by parentheses, like "(nick)", and when
adjacent to an apostrophe, like "nick's".

** Set 'erc-button-url-regexp' to 'browse-url-button-regexp'
which better handles surrounding pair of parentheses.

** New function 'erc-switch-to-buffer-other-window'
which is like 'erc-switch-to-buffer', but opens the buffer in another
window.

** New function 'erc-track-switch-buffer-other-window'
which is like 'erc-track-switch-buffer', but opens the buffer in
another window.

** NickServ passwords can now be retrieved from auth-source.
The 'erc-use-auth-source-for-nickserv-password' user option enables
querying auth-source for NickServ passwords.  To enable this, add the
following to your init file:

    (setq erc-use-auth-source-for-nickserv-password t)

** NickServ identification now prompts for password last.
When 'erc-prompt-for-nickserv-password' is non-nil, the user used to
be unconditionally prompted interactively for a password, regardless
of the value of 'erc-nickserv-passwords', which was effectively
ignored (same for the new
'erc-use-auth-source-for-nickserv-password').  This limitation is now
lifted, and the user is interactively prompted last, after the other
identification methods have run.

** The '/ignore' command will now ask for a timeout to stop ignoring the user.
Allowed inputs are seconds or ISO8601-like periods like "1h" or "4h30m".

** ERC now recognizes 'C-]' for italic text.
Italic text is displayed in the new 'erc-italic-face'.

** erc-match.el now supports 'message' highlight type (not including the nick).
The 'erc-current-nick-highlight-type', 'erc-pal-highlight-type',
'erc-fool-highlight-type', 'erc-keyword-highlight-type', and
'erc-dangerous-host-highlight-type' user options now support a
'message' type for highlighting the entire message but not the
sender's nick.

** erc-status-sidebar.el is now part of ERC.
The 'erc-status-sidebar' package which provides a HexChat-like
activity overview sidebar for joined IRC channels is now part of ERC.

** erc-tls now supports specifying a TLS client certificate.
The 'erc-tls' function has been updated to allow specifying a TLS
client certificate for authentication, as an alternative to NickServ
password-based authentication.  This is referred to as "CertFP" (short
for Certificate Fingerprint) by several IRC networks.  See the Info
node "(erc) Connecting" in the ERC manual for more details and
examples on how to specify and use TLS client certificates with
'erc-tls'.

** Update IRC-related references to point to Libera.Chat.
The Free Software Foundation and the GNU Project have moved their
official IRC channels from the Freenode network to Libera.Chat.
For the original announcement and the follow-up update, including
more details, see:

https://lists.gnu.org/archive/html/info-gnu/2021-06/msg00005.html
https://lists.gnu.org/archive/html/info-gnu/2021-06/msg00007.html

Given the relocation of GNU and FSF's official IRC channels, as well
as #emacs and various other Emacs-themed channels (see the link below)
to Libera.Chat, IRC-related references in the Emacs repository have
now been updated to point to Libera.Chat.

https://lists.gnu.org/archive/html/info-gnu-emacs/2021-06/msg00000.html

** Add 'erc-track-select-mode-line-face' (obsoletes 'erc-track-find-face').
The 'erc-track-find-face' function of the erc-track module has been
declared obsolete and rewritten as 'erc-track-select-mode-line-face',
with different expected arguments (the current and old faces are now
separated) and clearer documentation.

** Add '/opme' and '/deopme' convenience commands.
The new '/opme' convenience command asks ChanServ to set the operator
status for the current nick in the current channel, and '/deopme'
unsets it.

** Add '/wii' convenience command for whois with idle time.
The new '/wii' convenience command calls the '/whois' command with the
given nick as both arguments, which is useful for displaying the whois
information for the nick along with idle time, even if the nick is on
a different server than the one the current user is connected to.
Using the given nick itself instead of the server it is connected to
is not standardized, but is widely supported across IRC networks.

** Add 'erc-bug' command for reporting ERC bugs.
The new 'erc-bug' command prompts for a subject, and passes it on to
'report-emacs-bug' along with the current ERC version, and adds the
ERC mailing list in Cc.

\f
* Changes in ERC 5.3

** New function `erc-tls' is to be used for connecting to a server via TLS.
It requires the tls.el library.

** The function `erc-ssl' will now always use ssl.el, even in the version
of ERC that comes with Emacs.

** Type `C-u' before `C-c C-j' to prompt for a channel key
`erc-join-channel' now accepts a prefix-argument to prompt for the key
when channels are protected by keywords.

** ERC will now automatically determine which nick prefixes are valid
when joining a server.

** Figure out which directory contains startup files when looking for
.erc.el.  For Emacs this is usually ~/.emacs.d, and for XEmacs this is
usually ~/.xemacs.

** Fix bug with view-mode when running erc-toggle-debug-irc-protocol.

** Permit several commands to be run even when the server connection is dead.
This includes /CLEAR, /COUNTRY, /HELP, /LASTLOG, /QUIT, /GQUIT,
/RECONNECT, /SERVER, and /SET.

** Make /RECONNECT work better when the server connection is dead.
Also, handle case where the server buffer has been killed.

** Better handle interaction with /RECONNECT and indefinite reconnect
attempts.  Display message which tells the user that they can stop the
reconnect attempts by killing the server buffer.

** New option `erc-reuse-frames' determines whether new frames are always
created.  It defaults to not creating a new frame for an ERC buffer if
there is already a window displaying it.  This only has an effect when
the `erc-join-buffer' option is set to 'frame.

** New command /ME'S handles the case where someone types "/me's" in an
ERC buffer.  It concatenates the text " 's" to the beginning of the
input and then sends the result like a normal /ME command.

** Fix bug where some messages were being sent to the server too soon.
In the past, this may have resulted in strange problems like seeing
the connection attempt stall, which may have especially affected
spotty or traffic-shaped connections.

** Handle 307 (nick has identified) responses from the server.

** Display a less-confusing message if the connection attempt fails.

** On a tty, make sure that notices are displayed in blue rather than pink.

** By default, open query buffers that are initiated by others in a new
unselected window.  This may be changed by customizing the
`erc-auto-query' option.  This should make ERC more friendly to new
users.

** New option `erc-query-display' indicates how to display a query buffer
that is made using the /QUERY command.  The default is to display the
query in a new selected window.

** By default, display network name rather than server name in the modeline.
This should ERC use less space in the modeline.  To get the old
behavior back, set `erc-mode-line-format' to "%s %a".

** New option `erc-remove-parsed-property' determines whether to remove
the 'erc-parsed property.  This should save some memory in channels
with large amounts of text on screen.  It is enabled by default.

** Modules newly enabled by default

*** move-to-prompt: Move to the prompt when typing text.
*** networks: Provide data about IRC networks.

** New formatting variables allowed in `erc-format-network':

*** `%N': the name of the network.
*** `%S': much like %s, but let the network name trump the server name.

** Compatibility with old releases

*** In `erc-server-coding-system' and `erc-coding-system-for-target', pass
the `target' argument as the first and only argument to the function
named by these options.

*** In `erc-track-faces-priority-list', permit list entries to be lists of
faces.  This can be used to differentiate between, for example,
buttons in default text and buttons in notices.

*** The `erc-assert' function has been removed in favor of using `assert'
from cl-macs.el.

*** If your application uses the 'erc-parsed text property outside of
the insert hooks, you will need to set `erc-remove-parsed-property'
to nil.

** Changes and additions to modules

*** BBDB (erc-bbdb.el)

**** Work around bug in XEmacs 21.4 that causes an error to be thrown when
the first argument to `run-at-time' is nil.

*** Button (erc-button.el)

**** Recognize parentheses that are part of URLs.

**** When in a channel, only buttonize nicks from that channel.

*** DCC support (erc-dcc.el)

**** Turn this into the "dcc" module for ERC, so that it can be more
easily enabled.

**** New option `erc-dcc-listen-host' determines which IP address to listen
on for outside connection attempts.

**** New option `erc-dcc-public-host' determines which IP address to advertise
when sending a file.  This is useful for people who are on a local
subnet.  Together, these two options replace the `erc-dcc-host'
option.

**** New option `erc-dcc-receive-cache' indicates how much of a received
file to store in an Emacs buffer before flushing it to disk.  The
default is 0.5 MB.

**** Save only parts of received files in buffers, writing repeatedly to
disk after we get at least `erc-dcc-receive-cache' bytes.  This allows
users to receive very large files without running out of memory.

**** Rename `erc-verbose-dcc' option to `erc-dcc-verbose' and also
default it to nil.

**** Fix edge case in erc-dcc-send-sentinel.

**** If client confirms too much, then display byte count and kill the
file buffer.

*** Goodies (erc-goodies.el)

**** New module move-to-prompt causes the point to be moved to the prompt
if a user tries to type elsewhere in the buffer, and then inserts
their keystrokes after the prompt.  It is enabled by default.

**** New module keep-place keeps your place in unvisited ERC buffers
when new messages arrive.

**** Enable scroll-to-bottom in all ERC buffers when the module is enabled,
rather than having the user do it manually.

**** Fix bug with buffer ordering and scroll-to-bottom module.

**** In the unmorse module, handle the morse code style that has "/ " at
the end of every letter.

*** Identd (erc-identd.el)

**** Fix bad behavior when closing the identd process.

*** Channel lists (erc-list.el)

**** Replace the old module with a rewritten one, so that we can include
it with Emacs.  The old version of erc-list.el has been renamed to
erc-list-old.el, and is available as the list-old module.

The new version does not yet have support for XEmacs.

**** Don't display lots of output in the server buffer when running /LIST.

*** Logging (erc-log.el)

**** Permit the `erc-log-channels-directory' option to be set to a function
name.  This makes it easier to write custom functions that determine
where log files should be placed.

**** New option `erc-log-filter-function' specifies the function to call
for filtering text before writing it to a log file.  By default, no
filtering is performed.

*** Networks (erc-networks.el)

**** Turn this into the "networks" module for ERC, so that it can be more
easily enabled.  Enable it by default.

**** Add support for Rizon.

*** Internet services / Nickserv (erc-services.el)

**** New hook option `erc-nickserv-identified-hook' is run after NickServ
acknowledges a successful identification.

**** Add support for the GRnet and Rizon networks.

*** Timestamps (erc-stamp.el)

**** By default, place timestamps on both the left and the right.
The left timestamps appear once a day, and the right timestamps appear
once a minute when new messages arrive.  To change this, customize the
`erc-insert-timestamp-function' and
`erc-insert-away-timestamp-function' options.

*** Channel tracking (erc-track.el)

**** If `erc-track-position-in-mode-line' is set to nil, the tracking
information won't be shown in the mode line, which is a change from
the previous behavior of showing it "After all other information".

If this variable is set to t, then the information will be added to
the very end of the mode line.

**** New option `erc-track-remove-disconnected-buffers' controls whether
buffers associated with a server that is disconnected should be
removed from the modified buffers list.  The default is to keep them
in the list.

**** New hook option `erc-track-list-changed-hook' is run whenever the
contents of the modified channels list changes.  It is useful for
people who use a separate mechanism to provide notification of channel
activity.

**** The `erc-track-switch-direction' option now can be set to the value
'importance.  If set to this value, ERC will switch to channels in
order of importance, which is determined by the position of the
channel's face in `erc-track-faces-priority-list'.

**** Activate erc-track-minor-mode earlier in the connection process.

**** Don't track buttons in notices.

**** Get a rough idea for which channels are currently active by
switching between several normal conversation faces in the modeline.
This behavior can be modified by changing the new
`erc-track-faces-normal-list' option.

**** Ignore display of who set the default channel topic and listing of
users on the current channel.  Customize the `erc-track-exclude-types'
option to indicate the types of messages to exclude.  These two
message types are "333" and "353", respectively.

*** Support for acting as an XDCC file-server (erc-xdcc.el)

**** Turn this into the "xdcc" module for ERC, so that it can be more
easily enabled.

\f
* Changes in ERC 5.2

** M-x erc RET now starts ERC.
`erc-select' has been changed to `erc'.  `erc-select' still remains as
an alias of `erc'. Likewise, `erc-select-ssl' has been renamed to
`erc-ssl' with `erc-select-ssl' as its alias.  The function that was
known as `erc' is now `erc-open'.

** Open query buffers by default when private messages are received.
The default value of `erc-auto-query' has been changed to 'bury.

** New command: /RECONNECT
This command tries to reconnect to the current IRC server exactly
once.  It does not work in server buffers (throws an error before the
command is run), but works in query and channel buffers.

** In MS-DOS environments, look for _ercrc.el rather than .ercrc.el.

** Fix buggy interaction with multi-tty Emacs.

** After running /QUIT, make sure that the IRC process is killed within
4 seconds.  Freenode, in particular, needs this at times.

** If the IRC process has not responded to our PINGs within a certain
time, kill it and restart the connection.  See
`erc-server-auto-reconnect', `erc-server-reconnect-attempts',
`erc-server-reconnect-timeout', `erc-server-send-ping-interval', and
`erc-server-send-ping-timeout' to fine-tune ERC's behavior.

** Avoid getting into an infinite connection loop.
Previously, this could happen if your nick was banned, you were using
Tor, incorrect information was entered, or the connection was bad.

** Make ban messages less confusing.

** Restore the point correctly when reconnecting to an IRC server.

** Make /IGNORE and /UNIGNORE prompt to determine whether their
argument is a user or a regexp.  This results in less-confusing
behavior when trying to ignore someone who has a bracket in their
nick.

** Make the default port "6667" rather than "ircd", because some
operating systems don't know what port "ircd" maps to.

** Fix several bugs in erc-iswitchb (C-c C-b).

** Clean up internal documentation.
Special thanks go to Juanma Barranquero for the thorough vetting of
ERC's internal documentation.

** Display a more informative message when a module is not found.

** Fix a bug where paths were being colored like IRC commands.

** In the customize interface for `erc-modules', add the name of the module.
This makes it easier to find modules by name.

** erc-server-send-ping-interval: Change to use a default of 30 seconds.

** Some files which are included with the release of ERC 5.2 will not
appear in the version of ERC that is bundled with Emacs 22.  These
extras files may be found at:

 o https://ftp.gnu.org/gnu/erc/erc-5.2-extras.tar.gz, or
 o https://ftp.gnu.org/gnu/erc/erc-5.2-extras.zip.

** Renamed files

Several files were renamed so as to make them distinct to users of the
MS-DOS operating system.

 o erc-autojoin.el -> erc-join.el
 o erc-complete.el -> erc-hecomplete.el
 o erc-nickserv.el -> erc-services.el
 o ChangeLog.NNNN -> ChangeLog.NN

** Header line changes

*** Remove "[IRC]" from the header line.

*** Add the %l format character to `erc-header-line-format',

*** Document how to remove the header line.
Namely: (setq erc-header-line-format nil).

** New options

*** erc-server-reconnect-attempts: Determines the number of
reconnection attempts that ERC will make per server.

*** erc-server-reconnect-timeout: Determines the amount of time,
in seconds, that ERC will wait between successive reconnect attempts.

*** erc-server-send-ping-timeout: Determines when to consider a connection
stalled and restart it.  The default is	after 120 seconds.

*** erc-system-name: Determines the system name to use when logging in.
The default is to figure this out by calling `system-name'.

** New face: `erc-my-nick-face'
This helps make it easier to distinguish messages sent by yourself
from messages sent by other users when the value of the variable
`erc-show-my-nick' is non-nil.

** Namespace changes

*** New macro: `erc-with-server-buffer'
Switches to the current ERC server buffer and runs some code.  If no
server buffer is available, return nil.  This is a useful way to
access variables in the server buffer.

*** New function: `erc-open-server-buffer-p'
Returns non-nil if the given buffer is an ERC server buffer that has
an open IRC process.

*** New function: `erc-format-lag-time'
Returns the estimated lag time to server, `erc-server-lag'.

*** Renamed items

 o `erc-server-setup-periodical-server-ping' is now
   `erc-server-setup-periodical-ping'

 o `erc-away-p' is now `erc-away-time'

** Changes to the ERC manual

*** New section: Sample Session.
Describes a sample ERC session for connecting to the #emacs channel on
Freenode.  Also mention the #erc channel.

*** New section: Special Features.
Describes some of the special features of ERC.

*** Getting Started: Mention ~/.emacs.d/.ercrc.el and the Customize
interface.

*** Development: Mention ErcDevelopment page on emacswiki.org.

*** Tips and Tricks: Remove empty section for now.

*** Options: Mention how to see available ERC options.

*** Sample Configuration: Add an example of how to configure ERC.

** New modules

*** Autoaway (erc-autoaway.el)

**** Make this much more reliable.

**** Avoid duplicate messages when coming back from being away.

**** Fix bug where autoaway was enabled just by loading the file.

*** BBDB (erc-bbdb.el)

**** Display information on how to cancel merging of info or how to
create a new John Doe record.

**** Make it so that information from /whois continues to come in, even
while prompting for a record to merge.

**** Make hitting C-g correctly abort merging the record.

*** Capab identify (erc-capab.el)
Mark users who haven't identified to NickServ on servers supporting
CAPAB IDENTIFY-MSG.

** Changes and additions to modules

*** Button (erc-button.el)

**** Make <backtab> go to the previous button.

*** Channel tracking (erc-track.el)

**** Use mouse-face and help-echo for channel names in the mode-line.
This helps people using a mouse know that they are buttons and can be
clicked on.

**** Fix issue where C-c C-SPC could conflict with user-defined keybindings.
This is accomplished by moving these bindings to their own global
minor mode.  Now the default is to check whether the user has bound
something to C-c C-SPC or C-c C-@.  If they have, prompt them about
whether to really override that binding.  This also has the effect of
preventing ERC from clobbering rcirc's keybinding, unless this is
desired.  See `erc-track-enable-keybindings' for more details.

**** New option: erc-track-enable-keybindings.
Determine whether or not to enable the C-c C-SPC and C-c C-@
keybindings.  The default is to ask whether to do this if a binding to
these keys already exists.  It can also be set to t or nil to always
bind or never bind, respectively.

**** Remove `track-when-inactive' module.
See `erc-track-when-inactive' for further details.

**** New option: erc-track-when-inactive.
This option replaces the track-when-inactive module.  Set it to
non-nil to track activity even in visible buffers when inactive.  The
default is nil.

**** Remove the `track-modified-channels' alias for the `track' module.

*** DCC support (erc-dcc.el)

**** Add Usage section to Commentary.

**** Fix a bug in the server message output.

*** Filling (erc-fill.el)

**** Fix bug involving messages that start with one or more blank lines.

*** Identd (erc-identd.el)

**** New option `erc-identd-port'
Specifies the port to use if none is given as an argument to
`erc-identd-start'.  This is placed in the new customization group
`erc-identd'.

**** New function: `erc-identd-quickstart'
Ignores any arguments and calls `erc-identd-start'.

*** Channel lists (erc-list.el)

**** Enable by default, except in the version of ERC bundled with Emacs 22.

*** Logging (erc-log.el)

**** Make sure filenames are safe to use before writing to them.

**** Save all log buffers when exiting Emacs.

**** erc-generate-log-file-name-function: Add option for
`erc-generate-log-file-name-network', which is a new function that
uses the network name rather than the server name when possible.

*** Menu (erc-menu.el)

**** Name the menu "ERC" instead of "IRC" to avoid confusion with rcirc
and other clients.

**** Make this into a proper module and load it by default.

**** Add "Current channel" submenu.

*** Networks (erc-networks.el)

**** Add support for Ars OpenIRC, LinuxChix, and OFTC networks.

**** Escape periods in Konfido.Net and Kewl.Org.

*** Internet services / Nickserv (erc-nickserv.el)

**** Add new 'both method for the `erc-nickserv-identify-mode' option
and make it the default.  This tries to do the right thing both when a
known nickserv message exists for an IRC network, and when it does
not.

**** Support nickserv authentication on OFTC, Azzurra, Ars, and QuakeNet.

**** Support authentication on BitlBee.

**** Make source code easier to understand by using accessor functions.

*** Sound support (erc-sound.el)

**** Make this work with both Emacs 21 and Emacs 22.

*** Timestamps (erc-stamp.el)

**** Exclude the newline from the erc-timestamp field.

**** New function: `erc-toggle-timestamps'.
Toggles display of timestamps.

\f
* Changes in ERC 5.1.4

** Make find-function and find-variable work in Emacs 22 for
names that are constructed by `define-erc-module'.

** Fix bug introduced in ERC 5.1.3 that caused messages to go the
wrong buffer.

** Changes and additions to modules

*** Highlighting (erc-match.el)

**** Don't activate view-mode.

*** Logging (erc-log.el)

**** When this module is activated, make sure logging is enabled on
already-opened buffers.  Ditto for disabling logging when the module
is deactivated.

**** Fix some errors that occur when exiting Emacs without first
quitting open IRC servers.

\f
* Changes in ERC 5.1.3

** Fix use of /quote command with no initial whitespace.

** Make it possible to customize the colorization of the header line.
The `erc-header-line' face is used to color the header line.
The `erc-header-line-face-method' determines the method to use when
colorizing the header line.

** Add the new function `erc-handle-irc-url', which is a suitable
candidate to use for `url-irc-function'.  This permits some
integration of url.el and ERC.

** Fix several errors that occur when server or channel buffers are killed
prematurely.

** Fix toggling of flood control.

** Match the patterns in `erc-encoding-coding-alist' as regexps,
instead of verbatim text.  Also, match case-insensitively.

** The /SMV command has been removed, since we no longer have
meaningful module-specific version information.

** Fix a "(stringp nil)" error that can happen when doing /PART.

** Use a better example in the `erc-part-reason-various-alist'
documentation.

** When using `erc-quit-reason-various' and `erc-part-reason-various'
and no matches are found, default to using the ERC version string
rather than "nil".

** Add the `list' and `page' modules to the `erc-modules' customize
interface.

** Changes to the ERC manual

*** Update the list of available modules.

*** Revise information about releases and development.

*** Provide a simpler example in the "Getting Started" chapter.

*** Fully document how to connect to an IRC server in the new
"Connecting" chapter.

** Changes and additions to modules

*** Autoaway (erc-autoaway.el)

**** Rename the `erc-autoaway-use-emacs-idle' option to
`erc-autoaway-idle-method'.

**** Add support for autoaway based on user idle time.
This is now the default.

**** If you set the AWAY status yourself, erc-autoaway will not
interfere by un-setting AWAY prematurely.

**** If you are set away while visiting a non-ERC buffer,
erc-autoaway used to fail in bringing the user back.  This is now
fixed.

*** BBDB (erc-bbdb.el)

**** Add new option `erc-bbdb-electric-p', which determines whether
to make the BBDB buffer electric.  This defaults to not electric.

*** Button (erc-button.el)

**** Use <backtab> instead of <C-tab> for `erc-button-previous'.

*** Identd (erc-identd.el)

**** Fix a bug that involves starting the identd server.

**** Make this work with Emacs 22.

**** Provide a real ERC module named `identd'.

**** Don't create an extra buffer for the identd process.

*** Channel lists (erc-list.el)

**** Enable by default, except in the version of ERC bundled with Emacs 22.

*** Logging (erc-log.el)

**** By default, don't insert old logs when opening an ERC buffer.
This may be changed by customizing `erc-log-insert-log-on-open'.

**** New option `erc-log-write-after-send' determines whether the
log file will be written to after every sent message.  The default is
not to do this.

**** New option `erc-log-write-after-insert' determines whether the
log file will be written to when new text is added to a logged ERC
buffer.  The default is not to do this.  With this option and the
previous option, logging should no longer slow down ERC as much.

**** Default to saving buffers and queries on quit.
This may be changed by customizing the `erc-save-buffer-on-quit' and
`erc-save-queries-on-quit' options, respectively.

**** Only perform logging when the `logging' module is added to
`erc-modules'.  This prevents logging from being activated just by
loading the erc-log.el file, and makes logging act like other ERC
modules.

*** Programmable completion (erc-pcomplete.el)

**** Don't complete the user's current nickname.

\f
* Changes in ERC 5.1.2

** Fix compiler errors in erc-autojoin.el and erc-dcc.el.

** Move to end of prompt when ERC reconnects to a server.

** Changes and additions to modules

*** Spell-checking (erc-spelling.el)

**** Don't spell-check nicks or words that are prefixed with '/'.

**** Remove flyspell properties from words we shouldn't spell-check.

**** Fix an issue that caused the ispell process to reload every time
we switch to an ERC buffer.

*** Timestamps (erc-stamp.el)

**** Fix an inconsistency in calculating width of right timestamps.

**** Rename option `erc-timestamp-right-align-by-pixel' to
`erc-timestamp-use-align-to'.  This controls whether to use the more
fail-proof method of aligning right timestamps, as mentioned below.

**** Fix a right timestamp spacing problem that used to occur when
erc-stamp.el was byte-compiled.  Now that this is fixed, it is safe to
use the method that aligns right timestamps perfectly in Emacs22 with
X.  If the current version of Emacs doesn't support this method, use
the simpler method, which is prone to alignment issues for math
symbols and other variable-width text.

A side effect of using this new method is that there will only be one
space before a right timestamp in any saved logs.  If this is
unacceptable, set `erc-timestamp-use-align-to' to nil.

\f
* Changes in ERC 5.1.1

** Fix a requirement on cl.el.

** Use tls.el for SSL connections, rather than ssl.el.

** Changes and additions to modules

*** ibuffer integration (erc-ibuffer.el)

**** Update this to work with the version of ibuffer.el that comes with
recent Emacs variants.

*** Old completion (erc-complete.el)

**** Fix a few errors.

*** Speedbar (erc-speedbar.el)

**** Make this work with the version of speedbar.el that comes with
recent Emacs variants.

*** Timestamps (erc-stamp.el)

**** By default, use a more failsafe method of displaying right timestamps.
To get right timestamps to align perfectly in Emacs22 using X, set the
new `erc-timestamp-right-align-by-pixel' option to non-nil.

*** Viper compatibility (erc-viper.el)

**** Since most of these changes are now merged into Emacs22, detect
whether we need these changes and install them only if necessary.

\f
* Changes in ERC 5.1

** Improve XEmacs compatibility.

** Namespace changes

*** Now ERC doesn't use global variable space.
Renamed all variables that didn't start with "erc-".

  o `away' is now `erc-away'

  o `current-nick' is now `erc-server-current-nick'

  o `last-peers' is now `erc-server-last-peers'

  o `last-ping-time' is now `erc-server-last-ping-time'

  o `last-sent-time' is now `erc-server-last-sent-time'

  o `lines-sent' is now `erc-server-lines-sent'

  o `quitting' is now `erc-server-quitting'

*** Remove the `with-erc-channel-buffer' function.

** Bugfixes

*** Don't inadvertently destroy face properties.

*** Load erc scripts in a safer way.

*** Don't insert a timestamp if text at point is invisible.

*** Don't hide messages from those in `erc-fools' by default.
Color their nicks instead.

*** Use a more foolproof method of encoding and decoding strings
before sending to a channel.

** Backend changes

*** Renamed some server-specific variables

  o `erc-announced-server-name' is now `erc-server-announced-name'

  o `erc-auto-reconnect' is now `erc-server-auto-reconnect'

  o `erc-connect-function' is now `erc-server-connect-function'

  o `erc-default-coding-system' is now `erc-server-coding-system'

  o `erc-duplicate-timeout' is now `erc-server-duplicate-timeout'

  o `erc-duplicates' is now `erc-server-duplicates'

  o `erc-lag' is now `erc-server-lag'

  o `erc-prevent-duplicates' is now `erc-server-prevent-duplicates'

  o `erc-previous-read' is now `erc-server-filter-data'

  o `erc-process' is now `erc-server-process'

  o `erc-ping-handler' is now `erc-server-send-ping-handler'

  o `erc-ping-interval' is now `erc-server-send-ping-interval'

*** Renamed some functions

  o `erc-connect' is now `erc-server-connect'

  o `erc-process-filter' is now `erc-server-filter-function'

  o `erc-send-command' is now `erc-server-send'

  o `erc-send-single-line' is now `erc-send-input'

  o `erc-setup-periodical-server-ping' is now
    `erc-server-setup-periodical-server-ping'

  o `erc-split-command is now `erc-split-line'

*** New options

  o erc-server-flood-margin, erc-server-flood-penalty: New options
    that allow tweaking of flood control.

  o erc-split-line-length: The maximum line length of a single
    message.

*** New variables

  o erc-server-flood-last-message, erc-server-flood-queue,
    erc-server-flood-timer: Flood control.

  o erc-server-processing-p: Indicate when we're currently processing
    a message.

*** Remove some options

  o `erc-flood-limit'
  o `erc-flood-limit2'

** New customization group `erc-server' for dealing with IRC servers.

** ERC can now be installed by doing `make install' from the command line.

** ERC now has a manual in erc.texi.
Type `make doc' to generate HTML and Info versions of it.

** ERC no longer depends on cl.el.
Only the macros in cl-macs.el are used.

** Fix an edge case when quitting as new messages come in.

** Make flood protection toggle-able as on/off, removing the 'strict option.

** If possible, re-use channel buffers when reconnecting to a server.

** Text in ERC buffers is now read-only by default.
To get the previous behavior,

** Changes and additions to modules

*** Auto-join (erc-autojoin.el)

**** Recognize the Azzurra server.

*** BBDB (erc-bbdb.el)

**** When the user types /WHOIS, ask for a record to merge to.

**** Store the displayed name of a BitlBee contact.
The new `erc-bbdb-bitlbee-name-field' option specifies the field to use
to store this information.

**** Don't prompt for a name on /JOIN or /NICK.

*** Button (erc-button.el)

**** Fix customization of `erc-button-alist'

**** New option `erc-button-nickname-face' determines the face to use
when coloring ERC nicknames.

*** Channel tracking (erc-track.el)

**** Remove channels from the modified channels list if not currently
connected.  This should remove residue from the mode line after
quitting ERC.

**** Recognize buttonized text

*** Highlighting (erc-match.el)

**** Highlight current nickname by default.

**** Added the option of beeping when certain matches occur.
Add `erc-beep-on-match' to `erc-text-matched-hook' to enable
beeping.  Set the new variable `erc-beep-match-types' which match
types that make beeps.

*** Nicklist (erc-nicklist.el)

**** Fix a couple of errors.

**** Make sure a stray mouse click doesn't trigger an error.

**** Insert icons from the /images directory next to nicks.
This indicates their away status.  The location is customizable via
the new `erc-nicklist-icons-directory' option.

If you do not want these icons, set `erc-nicklist-use-icons' to nil.

*** Nickserv identification (erc-nickserv.el)

**** Recognize Azzurra and OFTC networks.

*** Old completion (erc-complete.el)

**** Disable by default.

*** Programmable completion (erc-pcomplete.el)

**** Enable by default.

*** Timestamps (erc-stamp.el)

**** On Emacs22, align right timestamps perfectly, even if variable-width
characters are used.  If we aren't using Emacs22, move text farther
away from the right margin when variable-width characters are used.
It is considered better to misalign the stamp by a bit than to go past
the right margin.

**** Enable by default

** New modules

*** Spell-checking (erc-spelling.el)

**** Use flyspell in ERC.

*** Viper compatibility (erc-viper.el)

**** Helps ERC work correctly in viper-mode.

\f
* Changes in ERC 5.0.4

** Fix a problem with undo in channels.

\f
* Changes in ERC 5.0.3

** Fix typo in the `ctcp-request-to' entry of the English catalog.

** Debugging with edegug has been made easier in all of the
erc-with-* and with-erc* macros.

** Non-ASCII character sets should be better supported when sending
and processing messages.

** A load failure with erc-autoaway.el and Emacs21 has been fixed.

** A few XEmacs warnings were fixed.

** Changes and additions to modules

*** Backend (erc-backend.el)

**** Move the check for hidden messages into `erc-display-message'
so there isn't so much replicated code.

**** Add `definition-name' property to constructed symbols so that
`find-function' and `find-variable' will be able to locate them.

**** Make sure logs are inserted info the correct channel buffers.
There was previously an error when using `erc-insert-log-on-open' in
combination with autojoin to multiple channels.

*** Button (erc-button.el)

**** The layering of `erc-button-face' on other faces in ERC buffers
has been improved.

*** Channel tracking (erc-track.el)

**** Use optimal amount of whitespace around modified channels
indicator.  Previously, there was an additional unnecessary space.

**** Fix an error that occurred when unchecked buffers existed when
invoking /QUIT.

\f
* Changes in ERC 5.0.2

** If a channel key is required for a certain channel, ERC will prompt
for one if `erc-prompt-for-channel-key' is non-nil.

** ERC doesn't try to reconnect if the network connection is refused
when using `open-network-stream-nowait' as the `erc-connect-function'.

** Messages from multiple servers will not go to the currently active
buffer.  The messages from each server will be contained in the most
recently active channel/server buffer that corresponds with the
server.

** Some text messages were cleaned up slightly.

** Button faces should no longer "cover" other faces.

** Made some XEmacs compatibility fixes.

** Nicknames containing a backslash are now correctly highlighted as
current-nick and buttonized as nicks.

** `erc-server-select' doesn't offer networks without servers as a
choice anymore.

** Non-ASCII character support has been improved.

** Changes and additions to modules

*** Menu (erc-menu.el)

**** You can now save logs and truncate buffers from the menu-bar.

\f
* Changes in ERC 5.0.1

** Narrowing in ERC buffers no longer causes formatting errors.

** The BBDB module now loads correctly when customizing `erc-modules'.

** The value of `erc-button-face' is now respected.

** Fixed a bug which caused a read-only error during connection.

** Server buffers are now tracked correctly.
This means that `erc-track-priority-faces-only', `erc-track-exclude',
and `erc-track-exclude-types' now work with server buffers.

\f
* Changes in ERC 5.0

** Channel members are now stored as a hash-table.
`erc-server-users' and `erc-channel-users' are now hash-tables, rather
than alists.  This significantly increases performance, especially in
large channels.  Each channel member is stored as an `erc-server-user'
struct, with additional information about the channels they are on
stored in an `erc-channel-user' struct.  Code using old alist-style
channel members needs to be updated to work with hash-tables.
This new code also removes the need for erc-members.el, which has been
removed.

** The way ERC deals with input from the server has changed.
All server response code is now in a new file, erc-backend.el.  There
should be no real user visible changes.  There are, however, a few
major changes for implementers, and module writers:

*** The PARSED response that all handlers get called with is
    no longer a vector, but an `erc-response' struct.

    This means LESS MAGIC NUMBERS in the ERC source code, but a few
    changes in how you get at parsed responses.

    The sender is accessed via `erc-response.sender'.

    The command is accessed via `erc-response.command'.

    The arguments to the command (everything after the command and
    before the colon) are accessed via `erc-response.command-args'.
    This is a /list/ of arguments in the order they appear in the
    unparsed response.

    The contents of the response is accessed via
    `erc-response.contents'.

    Should, for some reason, you want to do something with the
    /unparsed/ response, you can get it via `erc-response.unparsed'.

*** The `erc-server-hook-list' mechanism is gone.

    All server response handlers should be defined with
    `define-erc-response-handler'.  This defines functions and
    corresponding hook variables.

    The mapping of server commands to hook variables is no longer
    done via `erc-event-to-hook', but through an #'equal hash table,
    `erc-server-responses'.  In order to find a hook you do:

    (erc-get-hook command)

    See the docstring of `define-erc-response-handler' for more
    information.

*** ALL hook variables have been renamed.

    In accordance with recommendations in the Emacs Lisp manual,
    the hook variables are no longer called `erc-server-FOO-hook',
    but rather `erc-server-FOO-functions'.  This is to indicate
    that the functions they call take arguments.

    All the modules in ERC have been updated to reflect this change,
    but external module authors should beware.

** The values of `erc-mode-line-format' and `erc-header-line-format'
are now defined as strings to be formatted using `format-spec'.
`erc-mode-line-format' does not replace the whole mode-line anymore,
only `mode-line-buffer-identification' is set.  This way, personal
mode-line configurations are not modified and all key bindings work as
expected.  The process status (connecting, closed) is now shown in
`mode-line-process'.

** Customization of ERC variables has been made easier.  Variables
have been split into more groups for better organization.

** New variables

  o `erc-send-whitespace-lines' - Set this to send lines even if they
    are empty.

  o `erc-manual-set-nick-on-bad-nick-p' - If the nickname you chose is
    already taken or not allowed, your nick is not changed and you can
    try again manually if this is non-nil.

  o `erc-mode-line-away-status-format' - You can now set what is shown
    in the mode-line when you are away.

  o `erc-header-line-uses-help-echo-p' - The header-line now uses the
    help-echo property. You can set this to nil to disable it.

  o `erc-format-query-as-channel-p' - Set this to nil to have messages
    in the query buffer formatted like private messages.

  o `erc-show-channel-key-p' - The channel key is now shown with the
    other channel modes in the header line. Set this to nil if you
    want it hidden.

  o `erc-prompt-for-channel-key' - Set this if you want to be prompted
    for the channel key (channel's mode is +k) when you call
    `erc-join-channel' interactively.

  o `erc-kill-server-buffer-on-quit' - If non-nil, kill the server
    buffer automatically when you quit.

** New hooks

  o `erc-join-hook' - Called when you join a channel.

  o `erc-kick-hook' - Called when you are kicked from a channel. The
    channel's buffer is sent as an argument to functions called from
    this hook.

  o `erc-nick-changed-functions' - Whenever your nickname changes
    successfully, the functions in this hook are run with the
    arguments NEW-NICK and OLD-NICK.

** New command /WHOAMI - Do a /WHOIS on your current nickname.

** The key binding for changing channel modes is now C-c C-o.

** Removed variables

  o `erc-echo-notices-in-minibuffer-flag' and
    `erc-echo-notices-in-current-buffer' - You should use
    `erc-echo-notice-hook' and `erc-echo-notice-always-hook' instead.

  o `erc-prompt-interactive-input' has been removed (commented out)
    because nickname completion does not work with it.

  o All INFO buffer-related variables and functions have been removed.

** You can now disable modules by setting `erc-modules' with the
customization interface.

** Changes and additions to modules

*** Autoaway (erc-autoaway.el)

**** New variable `erc-autoaway-no-auto-back-regexp' - Add text which,
when you type anything matching it, will not automatically discard
your away status when `erc-auto-discard-away' is non-nil.

*** Filling (erc-fill.el)

**** New variable `erc-fill-variable-maximum-indentation' - Don't
indent more than this many characters when indenting a message from a
user with a long nickname.

*** Goodies (erc-goodies.el)

**** Miscellaneous small modules have been moved from erc.el.
The functions erc-add-scroll-to-bottom, erc-make-read-only,
erc-send-distinguish-noncommands, erc-interpret-controls, erc-unmorse,
erc-smiley, and erc-occur, which were defined in the main erc.el file
have been moved to erc-goodies.el and have mostly been translated to
the modules scrolltobottom, readonly, noncommands, irccontrols, smiley
and unmorse.

**** New variables

  o `erc-input-line-position' - The line number to use with
    `erc-scroll-to-bottom'.

  o `erc-beep-p' - Beep if there is a \C-g control character in a
    message.

*** Channel lists (erc-list.el)

**** New variable `erc-chanlist-highlight-face' - A face used for
highlighting the current line.

*** Highlighting (erc-match.el)

**** `erc-current-nick-highlight-type' has new options: 'keyword and
'nick-or-keyword.

*** Menu (erc-menu.el)

**** The `IRC' menu is now automatically added to `erc-mode' buffers.

*** Networks (erc-nets.el)

**** The functions for determining current network are in this file.
There were a couple of functions spread about in different files which
each had a different way of determining the current network.  The
methods have been combined, and the big list of known networks
(`erc-networks-alist') is being put to use.  You can access the
network's name by calling the new function `erc-network'.  This
returns the name of the current network as a symbol or 'Unknown if it
could not determine which network it is.

*** Nicklist (erc-nicklist.el)

**** ERC has a new way of displaying nicknames in a channel.
The new file erc-nicklist.el defines a new command `erc-nicklist'
which pops up a small Emacs window showing the nicknames of all
members of the current channel.  The implementation is not complete
and is rather proof-of-concept for now.  The result is something a bit
like erc-speedbar, but not quite as invasive, and doesn't require use
of a new frame.

*** Internet services / Nickserv (erc-nickserv.el)

**** Network detection is now taken care of by erc-nets.el.
The function `erc-current-network' is deprecated, use `erc-network'
instead.  The variable `erc-networks' has been removed, use
`erc-networks-alist'.  The network symbols used in
`erc-nickserv-alist' now match those in `erc-networks-alist'.

**** New variable `erc-nickserv-identify-mode' - Choose which method
to use for automatic identification: you can wait for Nickserv to ask
you to identify (the default), or send an identify message
automatically after you change your nickname.

*** Speedbar (erc-speedbar.el)

**** New variable `erc-speedbar-sort-users-type' - Sort users in a
channel by activity, alphabetically, or not at all.

*** Timestamps (erc-stamp.el)

**** `erc-timestamp-only-if-changed-flag' now works when
`erc-insert-timestamp-function' is set to 'erc-insert-timestamp-left.

**** New variable `erc-timestamp-intangible' - Set this to nil if
timestamps should not have the 'intangible property.

*** Channel tracking (erc-track.el)

**** Using faces to indicate channel activity in the modeline now works
in XEmacs.

**** New variables

  o `erc-track-priority-faces-only' - Ignore changes in a channel
    unless there is a face from the `erc-track-faces-priority-list' in
    the message.

  o `erc-track-exclude-server-buffer' - Ignore changes in the server
    buffer.

  o `erc-track-position-in-mode-line' - Set the position in the
    mode-line where modified channels are shown (only works in GNU
    Emacs versions above 21.3).

\f
* Changes in ERC 4.0

** The module system has again changed a lot.  You can now customize
  the variable `erc-modules' and define once and for all which
  extension modules you want to use.  This unfortunately may require
  you to change your current erc initialization code a bit, if you
  have some existing customizations.  On the other hand, this change
  makes the configuration of extension modules a lot easier for new
  users.  In theory, you should be able to configure all aspects of
  ERC by using the customize interface, you should no longer really
  need to write Lisp code for trivial customizations.

  By default, the following modules are now loaded: (pcomplete
  netsplit fill track ring button autojoin)

  Please use M-x customize-variable RET erc-modules RET to change the
  default if it does not suite your needs.

** THe symbol used in `erc-nickserv-passwords' for debian.org IRC servers
  (formerly called OpenProjects, now FreeNode) has changed from
  openprojects to freenode.  You may need to update your configuration
  for a successful automatic nickserv identification.

\f
* Changes in ERC 3.0.cvs.20030119

** New module erc-dcc:

This finally implements DCC.  It requires server sockets to fully work
in both directions.  This feature is currently only available in Emacs
21.3.50 (CVS). Here is a short list of what should work though.

** Compatibility:
  * Emacs 21.2, DCC get, and accepting DCC chat offers.
  * XEmacs 21, Only accepting DCC chat offers.

** erc is switching to global-minor-modes for activation of submodules.

This allows you to customize such a mode and get automatic loading of
the module.  No longer putting a lot of require statements in .emacs.
At least this is the long-term plan, not all modules are converted yet.

** The most important user visible change is that you now need to activate
erc-completion-mode, to get TAB completion.  The new completion code
is based on pcomplete.  To get the old code, manually load
erc-complete and bind TAB to erc-complete in erc-mode-map.

To activate completion on startup, put (erc-completion-mode 1) in your
.emacs file.

Same applies to timestamps.  You no longer need to (require
'erc-stamp), you can customize the variable `erc-timestamp-mode', and
the rest should be automatic.

\f
----------------------------------------------------------------------
This file is part of GNU Emacs.

GNU Emacs is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GNU Emacs.  If not, see <https://www.gnu.org/licenses/>.

\f
Local variables:
coding: utf-8
mode: outline
paragraph-separate: "[ 	\f]*$"
end: