* bug#119: modify-frame-parameters in Emacs 23 for fonts
@ 2008-08-07 17:38 Drew Adams
2008-08-27 17:01 ` Drew Adams
2008-11-28 21:38 ` Drew Adams
0 siblings, 2 replies; 10+ messages in thread
From: Drew Adams @ 2008-08-07 17:38 UTC (permalink / raw
To: 119
This bug is marked fixed, but it has not been fixed.
Jason marked it as fixed on 2008-05-08, with this note:
I've marked this as fixed, since the bug reported will
be fixed when font-backend is merged.
I will not close it at this time though, as valid points
about documentation were raised.
Then, on 2008-06-12, I received a mail saying that it was
closed. In any case, it is *not* fixed - I see the same
thing in this recent build:
GNU Emacs 23.0.60.1 (i386-mingw-nt5.1.2600)
of 2008-08-01 on LENNART-69DE564
Windowing system distributor `Microsoft Corp.', version 5.1.2600
configured using `configure --with-gcc (3.4) --no-opt --cflags
-Ic:/g/include -fno-crossjumping'
There are two things that might be the problem:
(1) `modify-frame-parameters' changes the `font' parameter behind your
back from the value you provide `modify-frame-parameters':
(modify-frame-parameters frame
(list (cons 'font "-outline-Lucida Console-normal-normal-\
normal-mono-15-*-*-*-c-*-iso8859-1")))
The `font' frame parameter is then:
"-outline-Lucida Console-normal-normal-normal-mono-15-\
*-*-*-c-*-fontset-auto8"
IOW, iso8859-1 gets replaced by fontset-auto8.
(2) `x-list-fonts' returns nil when passed such a font (i.e. with
fontset-auto8).
This breaks my code. Though the frame and the font appear normal,
`x-list-fonts' does not recognize such a font. My code changes the
font name to use a different size (e.g. changes 15 to 14), but it
checks that `x-list-fonts' recognizes the font name before trying to
use it. And `x-list-fonts' does not recognize the name (with
"fontset-auto8") that `modify-frame-parameters' establishes behind the
scene.
The font that I provide to `modify-frame-parameters' is recognized by
`x-list-fonts', and it has the same appearance, but it never appears
as the frame parameter in this context because
`modify-frame-parameters' substitutes a different name.
Below is the pertinent part of the original bug report. The symptom is
the same, but the font that `modify-frame-parameters' substitutes is
slightly different.
Back in April, it substituted:
"-outline-lucida console-normal-roman-normal-mono-15-\
*-*-*-*-*-fontset-startup"
Now it substitutes:
"-outline-Lucida Console-normal-normal-normal-mono-15-\
*-*-*-c-*-fontset-auto8"
Neither is recognized by `x-list-fonts'.
--------8<---------2008-04-05 report -------------------
(frame-parameter nil 'font) ->
"-*-Lucida Console-normal-r-*-*-14-*-96-96-c-*-iso8859-1"
(modify-frame-parameters
nil
(list
(cons
'font
"-*-Lucida Console-normal-r-*-*-15-*-96-96-c-*-iso8859-1")))
(frame-parameter nil 'font) ->
"-outline-lucida console-normal-roman-normal-mono-15-*-*-*-*-*-fontset-startup"
What's that about? In Emacs 20, 21, and 22, the result is just the font I
specified.
I have code that zooms frames (font size). I change just the point size in the
font spec, using `x-decompose-font-name' and `x-compose-font-name'. I check that
the result is a legitimate font using `x-list-fonts'. If not, I increase or
decrease the increment until I find the font that works with the closest size.
[Yes, I know there are other ways to adjust font size, but I've found that this
method is flexible for users and provides certain benefits.]
My code no longer works without change, because after one call to
`modify-frame-parameters' the font is no longer something recognized by
`x-list-fonts'. I can comment out the part that iterates until it finds a size
that works (recognized by `x-list-fonts'). That works, but I'm still curious
about this. (Is there perhaps a bug in `x-list-fonts' or in
`modify-frame-parameters'?)
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#119: modify-frame-parameters in Emacs 23 for fonts
2008-08-07 17:38 bug#119: modify-frame-parameters in Emacs 23 for fonts Drew Adams
@ 2008-08-27 17:01 ` Drew Adams
2008-08-27 23:41 ` Jason Rumney
2008-11-28 21:38 ` Drew Adams
1 sibling, 1 reply; 10+ messages in thread
From: Drew Adams @ 2008-08-27 17:01 UTC (permalink / raw
To: 119
FYI - This bug appears to be fixed in the Emacs 23 pretest (22.2.91).
Thanks very much.
> From: Drew Adams Sent: Thursday, August 07, 2008 10:38 AM
>
> This bug is marked fixed, but it has not been fixed.
> Jason marked it as fixed on 2008-05-08, with this note:
>
> I've marked this as fixed, since the bug reported will
> be fixed when font-backend is merged.
> I will not close it at this time though, as valid points
> about documentation were raised.
>
> Then, on 2008-06-12, I received a mail saying that it was
> closed. In any case, it is *not* fixed - I see the same
> thing in this recent build:
>
> GNU Emacs 23.0.60.1 (i386-mingw-nt5.1.2600)
> of 2008-08-01 on LENNART-69DE564
> Windowing system distributor `Microsoft Corp.', version 5.1.2600
> configured using `configure --with-gcc (3.4) --no-opt --cflags
> -Ic:/g/include -fno-crossjumping'
>
> There are two things that might be the problem:
>
> (1) `modify-frame-parameters' changes the `font' parameter behind your
> back from the value you provide `modify-frame-parameters':
>
> (modify-frame-parameters frame
> (list (cons 'font "-outline-Lucida Console-normal-normal-\
> normal-mono-15-*-*-*-c-*-iso8859-1")))
>
> The `font' frame parameter is then:
>
> "-outline-Lucida Console-normal-normal-normal-mono-15-\
> *-*-*-c-*-fontset-auto8"
>
> IOW, iso8859-1 gets replaced by fontset-auto8.
>
> (2) `x-list-fonts' returns nil when passed such a font (i.e. with
> fontset-auto8).
>
> This breaks my code. Though the frame and the font appear normal,
> `x-list-fonts' does not recognize such a font. My code changes the
> font name to use a different size (e.g. changes 15 to 14), but it
> checks that `x-list-fonts' recognizes the font name before trying to
> use it. And `x-list-fonts' does not recognize the name (with
> "fontset-auto8") that `modify-frame-parameters' establishes behind the
> scene.
>
> The font that I provide to `modify-frame-parameters' is recognized by
> `x-list-fonts', and it has the same appearance, but it never appears
> as the frame parameter in this context because
> `modify-frame-parameters' substitutes a different name.
>
>
> Below is the pertinent part of the original bug report. The symptom is
> the same, but the font that `modify-frame-parameters' substitutes is
> slightly different.
>
> Back in April, it substituted:
> "-outline-lucida console-normal-roman-normal-mono-15-\
> *-*-*-*-*-fontset-startup"
>
> Now it substitutes:
> "-outline-Lucida Console-normal-normal-normal-mono-15-\
> *-*-*-c-*-fontset-auto8"
>
> Neither is recognized by `x-list-fonts'.
>
> --------8<---------2008-04-05 report -------------------
>
> (frame-parameter nil 'font) ->
> "-*-Lucida Console-normal-r-*-*-14-*-96-96-c-*-iso8859-1"
>
> (modify-frame-parameters
> nil
> (list
> (cons
> 'font
> "-*-Lucida Console-normal-r-*-*-15-*-96-96-c-*-iso8859-1")))
>
> (frame-parameter nil 'font) ->
> "-outline-lucida
> console-normal-roman-normal-mono-15-*-*-*-*-*-fontset-startup"
>
> What's that about? In Emacs 20, 21, and 22, the result is
> just the font I
> specified.
>
> I have code that zooms frames (font size). I change just the
> point size in the
> font spec, using `x-decompose-font-name' and
> `x-compose-font-name'. I check that
> the result is a legitimate font using `x-list-fonts'. If not,
> I increase or
> decrease the increment until I find the font that works with
> the closest size.
>
> [Yes, I know there are other ways to adjust font size, but
> I've found that this
> method is flexible for users and provides certain benefits.]
>
> My code no longer works without change, because after one call to
> `modify-frame-parameters' the font is no longer something
> recognized by
> `x-list-fonts'. I can comment out the part that iterates
> until it finds a size
> that works (recognized by `x-list-fonts'). That works, but
> I'm still curious
> about this. (Is there perhaps a bug in `x-list-fonts' or in
> `modify-frame-parameters'?)
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#119: modify-frame-parameters in Emacs 23 for fonts
2008-08-27 17:01 ` Drew Adams
@ 2008-08-27 23:41 ` Jason Rumney
2008-08-28 14:56 ` Drew Adams
2008-08-28 14:56 ` Drew Adams
0 siblings, 2 replies; 10+ messages in thread
From: Jason Rumney @ 2008-08-27 23:41 UTC (permalink / raw
To: Drew Adams, 119
Drew Adams wrote:
> FYI - This bug appears to be fixed in the Emacs 23 pretest (22.2.91).
>
It is not an Emacs 23 pretest. It is an Emacs 22.3 pretest, which is why
bugs that have only ever been apparent in the trunk are not present in
this pretest.
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#119: modify-frame-parameters in Emacs 23 for fonts
2008-08-27 23:41 ` Jason Rumney
2008-08-28 14:56 ` Drew Adams
@ 2008-08-28 14:56 ` Drew Adams
1 sibling, 0 replies; 10+ messages in thread
From: Drew Adams @ 2008-08-28 14:56 UTC (permalink / raw
To: 'Jason Rumney', 119; +Cc: Emacs-Devel
> > FYI - This bug appears to be fixed in the Emacs 23 pretest
> > (22.2.91).
>
> It is not an Emacs 23 pretest. It is an Emacs 22.3 pretest,
> which is why bugs that have only ever been apparent in the
> trunk are not present in this pretest.
Oh, darn. I guess that means that these problems still are in Emacs 23. And this
also explains the "return" to the Emacs 22 icon that I noticed.
Please then disregard all my mails from yesterday about Emacs 23 bugs that I
thought had been fixed. Sorry for the confusion.
^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: bug#119: modify-frame-parameters in Emacs 23 for fonts
2008-08-27 23:41 ` Jason Rumney
@ 2008-08-28 14:56 ` Drew Adams
2008-08-28 14:56 ` Drew Adams
1 sibling, 0 replies; 10+ messages in thread
From: Drew Adams @ 2008-08-28 14:56 UTC (permalink / raw
To: 'Jason Rumney', 119; +Cc: Emacs-Devel
> > FYI - This bug appears to be fixed in the Emacs 23 pretest
> > (22.2.91).
>
> It is not an Emacs 23 pretest. It is an Emacs 22.3 pretest,
> which is why bugs that have only ever been apparent in the
> trunk are not present in this pretest.
Oh, darn. I guess that means that these problems still are in Emacs 23. And this
also explains the "return" to the Emacs 22 icon that I noticed.
Please then disregard all my mails from yesterday about Emacs 23 bugs that I
thought had been fixed. Sorry for the confusion.
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#119: modify-frame-parameters in Emacs 23 for fonts
2008-08-07 17:38 bug#119: modify-frame-parameters in Emacs 23 for fonts Drew Adams
2008-08-27 17:01 ` Drew Adams
@ 2008-11-28 21:38 ` Drew Adams
2008-11-28 22:07 ` Drew Adams
2008-11-28 22:14 ` Stephen Berman
1 sibling, 2 replies; 10+ messages in thread
From: Drew Adams @ 2008-11-28 21:38 UTC (permalink / raw
To: 119
This bug seems still not to be fixed, and I cannot even find it listed in the
bugs database:
http://emacsbugs.donarmstrong.com/cgi-bin/pkgreport.cgi?pkg=emacs.
What is that status of this bug? Is there some other bugs page where this
appears?
AFAICT, this bug persists; it was not fixed by merging the font-backend. Marking
it as fixed seems to have been premature.
Thx - Drew
> From: Drew Adams Sent: Thursday, August 07, 2008 10:38 AM
> This bug is marked fixed, but it has not been fixed.
> Jason marked it as fixed on 2008-05-08, with this note:
>
> I've marked this as fixed, since the bug reported will
> be fixed when font-backend is merged.
> I will not close it at this time though, as valid points
> about documentation were raised.
>
> Then, on 2008-06-12, I received a mail saying that it was
> closed. In any case, it is *not* fixed - I see the same
> thing in this recent build:
>
> GNU Emacs 23.0.60.1 (i386-mingw-nt5.1.2600)
> of 2008-08-01 on LENNART-69DE564
> Windowing system distributor `Microsoft Corp.', version 5.1.2600
> configured using `configure --with-gcc (3.4) --no-opt --cflags
> -Ic:/g/include -fno-crossjumping'
>
> There are two things that might be the problem:
>
> (1) `modify-frame-parameters' changes the `font' parameter behind your
> back from the value you provide `modify-frame-parameters':
>
> (modify-frame-parameters frame
> (list (cons 'font "-outline-Lucida Console-normal-normal-\
> normal-mono-15-*-*-*-c-*-iso8859-1")))
>
> The `font' frame parameter is then:
>
> "-outline-Lucida Console-normal-normal-normal-mono-15-\
> *-*-*-c-*-fontset-auto8"
>
> IOW, iso8859-1 gets replaced by fontset-auto8.
>
> (2) `x-list-fonts' returns nil when passed such a font (i.e. with
> fontset-auto8).
>
> This breaks my code. Though the frame and the font appear normal,
> `x-list-fonts' does not recognize such a font. My code changes the
> font name to use a different size (e.g. changes 15 to 14), but it
> checks that `x-list-fonts' recognizes the font name before trying to
> use it. And `x-list-fonts' does not recognize the name (with
> "fontset-auto8") that `modify-frame-parameters' establishes behind the
> scene.
>
> The font that I provide to `modify-frame-parameters' is recognized by
> `x-list-fonts', and it has the same appearance, but it never appears
> as the frame parameter in this context because
> `modify-frame-parameters' substitutes a different name.
>
>
> Below is the pertinent part of the original bug report. The symptom is
> the same, but the font that `modify-frame-parameters' substitutes is
> slightly different.
>
> Back in April, it substituted:
> "-outline-lucida console-normal-roman-normal-mono-15-\
> *-*-*-*-*-fontset-startup"
>
> Now it substitutes:
> "-outline-Lucida Console-normal-normal-normal-mono-15-\
> *-*-*-c-*-fontset-auto8"
>
> Neither is recognized by `x-list-fonts'.
>
> --------8<---------2008-04-05 report -------------------
>
> (frame-parameter nil 'font) ->
> "-*-Lucida Console-normal-r-*-*-14-*-96-96-c-*-iso8859-1"
>
> (modify-frame-parameters
> nil
> (list
> (cons
> 'font
> "-*-Lucida Console-normal-r-*-*-15-*-96-96-c-*-iso8859-1")))
>
> (frame-parameter nil 'font) ->
> "-outline-lucida
> console-normal-roman-normal-mono-15-*-*-*-*-*-fontset-startup"
>
> What's that about? In Emacs 20, 21, and 22, the result is
> just the font I
> specified.
>
> I have code that zooms frames (font size). I change just the
> point size in the
> font spec, using `x-decompose-font-name' and
> `x-compose-font-name'. I check that
> the result is a legitimate font using `x-list-fonts'. If not,
> I increase or
> decrease the increment until I find the font that works with
> the closest size.
>
> [Yes, I know there are other ways to adjust font size, but
> I've found that this
> method is flexible for users and provides certain benefits.]
>
> My code no longer works without change, because after one call to
> `modify-frame-parameters' the font is no longer something
> recognized by
> `x-list-fonts'. I can comment out the part that iterates
> until it finds a size
> that works (recognized by `x-list-fonts'). That works, but
> I'm still curious
> about this. (Is there perhaps a bug in `x-list-fonts' or in
> `modify-frame-parameters'?)
>
>
>
>
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#119: modify-frame-parameters in Emacs 23 for fonts
2008-11-28 21:38 ` Drew Adams
@ 2008-11-28 22:07 ` Drew Adams
2008-12-22 21:46 ` bug#1562: " Drew Adams
2008-11-28 22:14 ` Stephen Berman
1 sibling, 1 reply; 10+ messages in thread
From: Drew Adams @ 2008-11-28 22:07 UTC (permalink / raw
To: 119
Perhaps I should have added that the detailed symptoms are the same as before:
(1) `modify-frame-parameters' changes the `font' parameter behind
your back from the value you provide `modify-frame-parameters':
(modify-frame-parameters frame
(list (cons 'font "-outline-Lucida Console-normal-normal-\
normal-mono-15-*-*-*-c-*-iso8859-1")))
The `font' frame parameter is then:
"-outline-Lucida Console-normal-normal-normal-mono-15-\
*-*-*-c-*-fontset-auto8"
^^^^^^^^^^^^^
IOW, iso8859-1 gets replaced by fontset-auto8.
(2) `x-list-fonts' returns nil when passed such a font (i.e. with
fontset-auto8).
> From: Drew Adams Sent: Friday, November 28, 2008 1:38 PM
> This bug seems still not to be fixed, and I cannot even find
> it listed in the bugs database:
> http://emacsbugs.donarmstrong.com/cgi-bin/pkgreport.cgi?pkg=emacs.
>
> What is that status of this bug? Is there some other bugs
> page where this appears?
>
> AFAICT, this bug persists; it was not fixed by merging the
> font-backend. Marking it as fixed seems to have been premature.
>
> Thx - Drew
>
> > From: Drew Adams Sent: Thursday, August 07, 2008 10:38 AM
> > This bug is marked fixed, but it has not been fixed.
> > Jason marked it as fixed on 2008-05-08, with this note:
> >
> > I've marked this as fixed, since the bug reported will
> > be fixed when font-backend is merged.
> > I will not close it at this time though, as valid points
> > about documentation were raised.
> >
> > Then, on 2008-06-12, I received a mail saying that it was
> > closed. In any case, it is *not* fixed - I see the same
> > thing in this recent build:
> >
> > GNU Emacs 23.0.60.1 (i386-mingw-nt5.1.2600)
> > of 2008-08-01 on LENNART-69DE564
> > Windowing system distributor `Microsoft Corp.', version 5.1.2600
> > configured using `configure --with-gcc (3.4) --no-opt --cflags
> > -Ic:/g/include -fno-crossjumping'
> >
> > There are two things that might be the problem:
> >
> > (1) `modify-frame-parameters' changes the `font' parameter
> behind your
> > back from the value you provide `modify-frame-parameters':
> >
> > (modify-frame-parameters frame
> > (list (cons 'font "-outline-Lucida Console-normal-normal-\
> > normal-mono-15-*-*-*-c-*-iso8859-1")))
> >
> > The `font' frame parameter is then:
> >
> > "-outline-Lucida Console-normal-normal-normal-mono-15-\
> > *-*-*-c-*-fontset-auto8"
> >
> > IOW, iso8859-1 gets replaced by fontset-auto8.
> >
> > (2) `x-list-fonts' returns nil when passed such a font (i.e. with
> > fontset-auto8).
> >
> > This breaks my code. Though the frame and the font appear normal,
> > `x-list-fonts' does not recognize such a font. My code changes the
> > font name to use a different size (e.g. changes 15 to 14), but it
> > checks that `x-list-fonts' recognizes the font name before trying to
> > use it. And `x-list-fonts' does not recognize the name (with
> > "fontset-auto8") that `modify-frame-parameters' establishes
> behind the
> > scene.
> >
> > The font that I provide to `modify-frame-parameters' is
> recognized by
> > `x-list-fonts', and it has the same appearance, but it never appears
> > as the frame parameter in this context because
> > `modify-frame-parameters' substitutes a different name.
> >
> >
> > Below is the pertinent part of the original bug report. The
> symptom is
> > the same, but the font that `modify-frame-parameters' substitutes is
> > slightly different.
> >
> > Back in April, it substituted:
> > "-outline-lucida console-normal-roman-normal-mono-15-\
> > *-*-*-*-*-fontset-startup"
> >
> > Now it substitutes:
> > "-outline-Lucida Console-normal-normal-normal-mono-15-\
> > *-*-*-c-*-fontset-auto8"
> >
> > Neither is recognized by `x-list-fonts'.
> >
> > --------8<---------2008-04-05 report -------------------
> >
> > (frame-parameter nil 'font) ->
> > "-*-Lucida Console-normal-r-*-*-14-*-96-96-c-*-iso8859-1"
> >
> > (modify-frame-parameters
> > nil
> > (list
> > (cons
> > 'font
> > "-*-Lucida Console-normal-r-*-*-15-*-96-96-c-*-iso8859-1")))
> >
> > (frame-parameter nil 'font) ->
> > "-outline-lucida
> > console-normal-roman-normal-mono-15-*-*-*-*-*-fontset-startup"
> >
> > What's that about? In Emacs 20, 21, and 22, the result is
> > just the font I
> > specified.
> >
> > I have code that zooms frames (font size). I change just the
> > point size in the
> > font spec, using `x-decompose-font-name' and
> > `x-compose-font-name'. I check that
> > the result is a legitimate font using `x-list-fonts'. If not,
> > I increase or
> > decrease the increment until I find the font that works with
> > the closest size.
> >
> > [Yes, I know there are other ways to adjust font size, but
> > I've found that this
> > method is flexible for users and provides certain benefits.]
> >
> > My code no longer works without change, because after one call to
> > `modify-frame-parameters' the font is no longer something
> > recognized by
> > `x-list-fonts'. I can comment out the part that iterates
> > until it finds a size
> > that works (recognized by `x-list-fonts'). That works, but
> > I'm still curious
> > about this. (Is there perhaps a bug in `x-list-fonts' or in
> > `modify-frame-parameters'?)
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#119: modify-frame-parameters in Emacs 23 for fonts
2008-11-28 21:38 ` Drew Adams
2008-11-28 22:07 ` Drew Adams
@ 2008-11-28 22:14 ` Stephen Berman
2008-11-28 22:36 ` Drew Adams
1 sibling, 1 reply; 10+ messages in thread
From: Stephen Berman @ 2008-11-28 22:14 UTC (permalink / raw
To: Drew Adams; +Cc: 119
On Fri, 28 Nov 2008 13:38:29 -0800 "Drew Adams" <drew.adams@oracle.com> wrote:
> This bug seems still not to be fixed, and I cannot even find it listed in the
> bugs database:
> http://emacsbugs.donarmstrong.com/cgi-bin/pkgreport.cgi?pkg=emacs.
>
> What is that status of this bug? Is there some other bugs page where this
> appears?
On the above page you can find it by clicking on either of the links in
"See the _archived reports_ or _archived and unarchived reports_", i.e.,
http://emacsbugs.donarmstrong.com/cgi-bin/pkgreport.cgi?ordering=normal;archive=1;package=emacs;repeatmerged=1
or
http://emacsbugs.donarmstrong.com/cgi-bin/pkgreport.cgi?ordering=normal;archive=both;package=emacs;repeatmerged=1
Also, you can find it from http://emacsbugs.donarmstrong.com/ by typing
"119" in the textbox below "Find a bug by number:" and clicking the
"Find" button.
Steve Berman
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#119: modify-frame-parameters in Emacs 23 for fonts
2008-11-28 22:14 ` Stephen Berman
@ 2008-11-28 22:36 ` Drew Adams
0 siblings, 0 replies; 10+ messages in thread
From: Drew Adams @ 2008-11-28 22:36 UTC (permalink / raw
To: 'Stephen Berman'; +Cc: 119
[-- Attachment #1: Type: text/plain, Size: 1345 bytes --]
> > This bug seems still not to be fixed, and I cannot even
> > find it listed in the bugs database:
> > http://emacsbugs.donarmstrong.com/cgi-bin/pkgreport.cgi?pkg=emacs.
> >
> > What is that status of this bug? Is there some other bugs
> > page where this appears?
>
> On the above page you can find it by clicking on either of
> the links in "See the _archived reports_ or _archived and
> unarchived reports_", i.e.,
> http://emacsbugs.donarmstrong.com/cgi-bin/pkgreport.cgi?orderi
> ng=normal;archive=1;package=emacs;repeatmerged=1
> or
> http://emacsbugs.donarmstrong.com/cgi-bin/pkgreport.cgi?orderi
ng=normal;archive=both;package=emacs;repeatmerged=1
>
> Also, you can find it from http://emacsbugs.donarmstrong.com/
> by typing "119" in the textbox below "Find a bug by number:" and
> clicking the "Find" button.
1. Ah, thank you.
I'd propose that a search field be added also to this page:
http://emacsbugs.donarmstrong.com/cgi-bin/pkgreport.cgi?pkg=emacs,
and that search there be limited to bugs that are in the Emacs package.
That page seems to be the main entry point for Emacs bugs. It makes sense to
have a search field there, IMO.
2. I and Jason have sent followups to this bug that do not appear in the
bug-report page (the archived bugs page cited above). What happened to them? I
have attached them to this mail.
[-- Attachment #2: Type: message/rfc822, Size: 6322 bytes --]
[-- Attachment #2.1.1: Type: text/plain, Size: 525 bytes --]
> > FYI - This bug appears to be fixed in the Emacs 23 pretest
> > (22.2.91).
>
> It is not an Emacs 23 pretest. It is an Emacs 22.3 pretest,
> which is why bugs that have only ever been apparent in the
> trunk are not present in this pretest.
Oh, darn. I guess that means that these problems still are in Emacs 23. And this
also explains the "return" to the Emacs 22 icon that I noticed.
Please then disregard all my mails from yesterday about Emacs 23 bugs that I
thought had been fixed. Sorry for the confusion.
[-- Attachment #2.1.2: Type: text/html, Size: 1222 bytes --]
[-- Attachment #3: Type: message/rfc822, Size: 3013 bytes --]
[-- Attachment #3.1.1: Type: text/plain, Size: 257 bytes --]
Drew Adams wrote:
> FYI - This bug appears to be fixed in the Emacs 23 pretest (22.2.91).
>
It is not an Emacs 23 pretest. It is an Emacs 22.3 pretest, which is why
bugs that have only ever been apparent in the trunk are not present in
this pretest.
[-- Attachment #3.1.2: Type: text/html, Size: 810 bytes --]
[-- Attachment #4: Type: message/rfc822, Size: 16555 bytes --]
[-- Attachment #4.1.1: Type: text/plain, Size: 4010 bytes --]
FYI - This bug appears to be fixed in the Emacs 23 pretest (22.2.91).
Thanks very much.
> From: Drew Adams Sent: Thursday, August 07, 2008 10:38 AM
>
> This bug is marked fixed, but it has not been fixed.
> Jason marked it as fixed on 2008-05-08, with this note:
>
> I've marked this as fixed, since the bug reported will
> be fixed when font-backend is merged.
> I will not close it at this time though, as valid points
> about documentation were raised.
>
> Then, on 2008-06-12, I received a mail saying that it was
> closed. In any case, it is *not* fixed - I see the same
> thing in this recent build:
>
> GNU Emacs 23.0.60.1 (i386-mingw-nt5.1.2600)
> of 2008-08-01 on LENNART-69DE564
> Windowing system distributor `Microsoft Corp.', version 5.1.2600
> configured using `configure --with-gcc (3.4) --no-opt --cflags
> -Ic:/g/include -fno-crossjumping'
>
> There are two things that might be the problem:
>
> (1) `modify-frame-parameters' changes the `font' parameter behind your
> back from the value you provide `modify-frame-parameters':
>
> (modify-frame-parameters frame
> (list (cons 'font "-outline-Lucida Console-normal-normal-\
> normal-mono-15-*-*-*-c-*-iso8859-1")))
>
> The `font' frame parameter is then:
>
> "-outline-Lucida Console-normal-normal-normal-mono-15-\
> *-*-*-c-*-fontset-auto8"
>
> IOW, iso8859-1 gets replaced by fontset-auto8.
>
> (2) `x-list-fonts' returns nil when passed such a font (i.e. with
> fontset-auto8).
>
> This breaks my code. Though the frame and the font appear normal,
> `x-list-fonts' does not recognize such a font. My code changes the
> font name to use a different size (e.g. changes 15 to 14), but it
> checks that `x-list-fonts' recognizes the font name before trying to
> use it. And `x-list-fonts' does not recognize the name (with
> "fontset-auto8") that `modify-frame-parameters' establishes behind the
> scene.
>
> The font that I provide to `modify-frame-parameters' is recognized by
> `x-list-fonts', and it has the same appearance, but it never appears
> as the frame parameter in this context because
> `modify-frame-parameters' substitutes a different name.
>
>
> Below is the pertinent part of the original bug report. The symptom is
> the same, but the font that `modify-frame-parameters' substitutes is
> slightly different.
>
> Back in April, it substituted:
> "-outline-lucida console-normal-roman-normal-mono-15-\
> *-*-*-*-*-fontset-startup"
>
> Now it substitutes:
> "-outline-Lucida Console-normal-normal-normal-mono-15-\
> *-*-*-c-*-fontset-auto8"
>
> Neither is recognized by `x-list-fonts'.
>
> --------8<---------2008-04-05 report -------------------
>
> (frame-parameter nil 'font) ->
> "-*-Lucida Console-normal-r-*-*-14-*-96-96-c-*-iso8859-1"
>
> (modify-frame-parameters
> nil
> (list
> (cons
> 'font
> "-*-Lucida Console-normal-r-*-*-15-*-96-96-c-*-iso8859-1")))
>
> (frame-parameter nil 'font) ->
> "-outline-lucida
> console-normal-roman-normal-mono-15-*-*-*-*-*-fontset-startup"
>
> What's that about? In Emacs 20, 21, and 22, the result is
> just the font I
> specified.
>
> I have code that zooms frames (font size). I change just the
> point size in the
> font spec, using `x-decompose-font-name' and
> `x-compose-font-name'. I check that
> the result is a legitimate font using `x-list-fonts'. If not,
> I increase or
> decrease the increment until I find the font that works with
> the closest size.
>
> [Yes, I know there are other ways to adjust font size, but
> I've found that this
> method is flexible for users and provides certain benefits.]
>
> My code no longer works without change, because after one call to
> `modify-frame-parameters' the font is no longer something
> recognized by
> `x-list-fonts'. I can comment out the part that iterates
> until it finds a size
> that works (recognized by `x-list-fonts'). That works, but
> I'm still curious
> about this. (Is there perhaps a bug in `x-list-fonts' or in
> `modify-frame-parameters'?)
[-- Attachment #4.1.2: Type: text/html, Size: 7931 bytes --]
[-- Attachment #5: Type: message/rfc822, Size: 14431 bytes --]
[-- Attachment #5.1.1: Type: text/plain, Size: 3632 bytes --]
This bug is marked fixed, but it has not been fixed.
Jason marked it as fixed on 2008-05-08, with this note:
I've marked this as fixed, since the bug reported will
be fixed when font-backend is merged.
I will not close it at this time though, as valid points
about documentation were raised.
Then, on 2008-06-12, I received a mail saying that it was
closed. In any case, it is *not* fixed - I see the same
thing in this recent build:
GNU Emacs 23.0.60.1 (i386-mingw-nt5.1.2600)
of 2008-08-01 on LENNART-69DE564
Windowing system distributor `Microsoft Corp.', version 5.1.2600
configured using `configure --with-gcc (3.4) --no-opt --cflags
-Ic:/g/include -fno-crossjumping'
There are two things that might be the problem:
(1) `modify-frame-parameters' changes the `font' parameter behind your
back from the value you provide `modify-frame-parameters':
(modify-frame-parameters frame
(list (cons 'font "-outline-Lucida Console-normal-normal-\
normal-mono-15-*-*-*-c-*-iso8859-1")))
The `font' frame parameter is then:
"-outline-Lucida Console-normal-normal-normal-mono-15-\
*-*-*-c-*-fontset-auto8"
IOW, iso8859-1 gets replaced by fontset-auto8.
(2) `x-list-fonts' returns nil when passed such a font (i.e. with
fontset-auto8).
This breaks my code. Though the frame and the font appear normal,
`x-list-fonts' does not recognize such a font. My code changes the
font name to use a different size (e.g. changes 15 to 14), but it
checks that `x-list-fonts' recognizes the font name before trying to
use it. And `x-list-fonts' does not recognize the name (with
"fontset-auto8") that `modify-frame-parameters' establishes behind the
scene.
The font that I provide to `modify-frame-parameters' is recognized by
`x-list-fonts', and it has the same appearance, but it never appears
as the frame parameter in this context because
`modify-frame-parameters' substitutes a different name.
Below is the pertinent part of the original bug report. The symptom is
the same, but the font that `modify-frame-parameters' substitutes is
slightly different.
Back in April, it substituted:
"-outline-lucida console-normal-roman-normal-mono-15-\
*-*-*-*-*-fontset-startup"
Now it substitutes:
"-outline-Lucida Console-normal-normal-normal-mono-15-\
*-*-*-c-*-fontset-auto8"
Neither is recognized by `x-list-fonts'.
--------8<---------2008-04-05 report -------------------
(frame-parameter nil 'font) ->
"-*-Lucida Console-normal-r-*-*-14-*-96-96-c-*-iso8859-1"
(modify-frame-parameters
nil
(list
(cons
'font
"-*-Lucida Console-normal-r-*-*-15-*-96-96-c-*-iso8859-1")))
(frame-parameter nil 'font) ->
"-outline-lucida console-normal-roman-normal-mono-15-*-*-*-*-*-fontset-startup"
What's that about? In Emacs 20, 21, and 22, the result is just the font I
specified.
I have code that zooms frames (font size). I change just the point size in the
font spec, using `x-decompose-font-name' and `x-compose-font-name'. I check that
the result is a legitimate font using `x-list-fonts'. If not, I increase or
decrease the increment until I find the font that works with the closest size.
[Yes, I know there are other ways to adjust font size, but I've found that this
method is flexible for users and provides certain benefits.]
My code no longer works without change, because after one call to
`modify-frame-parameters' the font is no longer something recognized by
`x-list-fonts'. I can comment out the part that iterates until it finds a size
that works (recognized by `x-list-fonts'). That works, but I'm still curious
about this. (Is there perhaps a bug in `x-list-fonts' or in
`modify-frame-parameters'?)
[-- Attachment #5.1.2: Type: text/html, Size: 6221 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#1562: bug#119: modify-frame-parameters in Emacs 23 for fonts
2008-11-28 22:07 ` Drew Adams
@ 2008-12-22 21:46 ` Drew Adams
0 siblings, 0 replies; 10+ messages in thread
From: Drew Adams @ 2008-12-22 21:46 UTC (permalink / raw
To: 119, 1562
I sent this bug report update 2008-11-28. It never showed up in the bug tracker,
AFAICT. I'm guessing that bug #119 was merged with bug #1562, but this message
never showed up for either #119 or #1562. It seems that #119 is still closed and
archived, but #1562 is still open (?).
I thought that I sent a message to control@emacsbugs.donarmstrong.com with this
body, but either I didn't or that did not reopen the bug.
reopen 119
stop
I just tried that again, using the formula that Don gave:
unarchive 119
forcemerge 119 1562
reopen 119
thanks
In any case, the bug is still open.
> From: Drew Adams Sent: Friday, November 28, 2008 2:08 PM
> To: 119@emacsbugs.donarmstrong.com
> Subject: bug#119: modify-frame-parameters in Emacs 23 for fonts
>
> Perhaps I should have added that the detailed symptoms are
> the same as before:
>
> (1) `modify-frame-parameters' changes the `font' parameter behind
> your back from the value you provide `modify-frame-parameters':
> (modify-frame-parameters frame
> (list (cons 'font "-outline-Lucida Console-normal-normal-\
> normal-mono-15-*-*-*-c-*-iso8859-1")))
>
> The `font' frame parameter is then:
> "-outline-Lucida Console-normal-normal-normal-mono-15-\
> *-*-*-c-*-fontset-auto8"
> ^^^^^^^^^^^^^
>
> IOW, iso8859-1 gets replaced by fontset-auto8.
>
> (2) `x-list-fonts' returns nil when passed such a font (i.e. with
> fontset-auto8).
>
>
> > From: Drew Adams Sent: Friday, November 28, 2008 1:38 PM
> > This bug seems still not to be fixed, and I cannot even find
> > it listed in the bugs database:
> > http://emacsbugs.donarmstrong.com/cgi-bin/pkgreport.cgi?pkg=emacs.
> >
> > What is that status of this bug? Is there some other bugs
> > page where this appears?
> >
> > AFAICT, this bug persists; it was not fixed by merging the
> > font-backend. Marking it as fixed seems to have been premature.
> >
> > Thx - Drew
> >
> > > From: Drew Adams Sent: Thursday, August 07, 2008 10:38 AM
> > > This bug is marked fixed, but it has not been fixed.
> > > Jason marked it as fixed on 2008-05-08, with this note:
> > >
> > > I've marked this as fixed, since the bug reported will
> > > be fixed when font-backend is merged.
> > > I will not close it at this time though, as valid points
> > > about documentation were raised.
> > >
> > > Then, on 2008-06-12, I received a mail saying that it was
> > > closed. In any case, it is *not* fixed - I see the same
> > > thing in this recent build:
> > >
> > > GNU Emacs 23.0.60.1 (i386-mingw-nt5.1.2600)
> > > of 2008-08-01 on LENNART-69DE564
> > > Windowing system distributor `Microsoft Corp.', version 5.1.2600
> > > configured using `configure --with-gcc (3.4) --no-opt --cflags
> > > -Ic:/g/include -fno-crossjumping'
> > >
> > > There are two things that might be the problem:
> > >
> > > (1) `modify-frame-parameters' changes the `font' parameter
> > behind your
> > > back from the value you provide `modify-frame-parameters':
> > >
> > > (modify-frame-parameters frame
> > > (list (cons 'font "-outline-Lucida Console-normal-normal-\
> > > normal-mono-15-*-*-*-c-*-iso8859-1")))
> > >
> > > The `font' frame parameter is then:
> > >
> > > "-outline-Lucida Console-normal-normal-normal-mono-15-\
> > > *-*-*-c-*-fontset-auto8"
> > >
> > > IOW, iso8859-1 gets replaced by fontset-auto8.
> > >
> > > (2) `x-list-fonts' returns nil when passed such a font (i.e. with
> > > fontset-auto8).
> > >
> > > This breaks my code. Though the frame and the font appear normal,
> > > `x-list-fonts' does not recognize such a font. My code changes the
> > > font name to use a different size (e.g. changes 15 to 14), but it
> > > checks that `x-list-fonts' recognizes the font name
> before trying to
> > > use it. And `x-list-fonts' does not recognize the name (with
> > > "fontset-auto8") that `modify-frame-parameters' establishes
> > behind the
> > > scene.
> > >
> > > The font that I provide to `modify-frame-parameters' is
> > recognized by
> > > `x-list-fonts', and it has the same appearance, but it
> never appears
> > > as the frame parameter in this context because
> > > `modify-frame-parameters' substitutes a different name.
> > >
> > >
> > > Below is the pertinent part of the original bug report. The
> > symptom is
> > > the same, but the font that `modify-frame-parameters'
> substitutes is
> > > slightly different.
> > >
> > > Back in April, it substituted:
> > > "-outline-lucida console-normal-roman-normal-mono-15-\
> > > *-*-*-*-*-fontset-startup"
> > >
> > > Now it substitutes:
> > > "-outline-Lucida Console-normal-normal-normal-mono-15-\
> > > *-*-*-c-*-fontset-auto8"
> > >
> > > Neither is recognized by `x-list-fonts'.
> > >
> > > --------8<---------2008-04-05 report -------------------
> > >
> > > (frame-parameter nil 'font) ->
> > > "-*-Lucida Console-normal-r-*-*-14-*-96-96-c-*-iso8859-1"
> > >
> > > (modify-frame-parameters
> > > nil
> > > (list
> > > (cons
> > > 'font
> > > "-*-Lucida Console-normal-r-*-*-15-*-96-96-c-*-iso8859-1")))
> > >
> > > (frame-parameter nil 'font) ->
> > > "-outline-lucida
> > > console-normal-roman-normal-mono-15-*-*-*-*-*-fontset-startup"
> > >
> > > What's that about? In Emacs 20, 21, and 22, the result is
> > > just the font I
> > > specified.
> > >
> > > I have code that zooms frames (font size). I change just the
> > > point size in the
> > > font spec, using `x-decompose-font-name' and
> > > `x-compose-font-name'. I check that
> > > the result is a legitimate font using `x-list-fonts'. If not,
> > > I increase or
> > > decrease the increment until I find the font that works with
> > > the closest size.
> > >
> > > [Yes, I know there are other ways to adjust font size, but
> > > I've found that this
> > > method is flexible for users and provides certain benefits.]
> > >
> > > My code no longer works without change, because after one call to
> > > `modify-frame-parameters' the font is no longer something
> > > recognized by
> > > `x-list-fonts'. I can comment out the part that iterates
> > > until it finds a size
> > > that works (recognized by `x-list-fonts'). That works, but
> > > I'm still curious
> > > about this. (Is there perhaps a bug in `x-list-fonts' or in
> > > `modify-frame-parameters'?)
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2008-12-22 21:46 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-08-07 17:38 bug#119: modify-frame-parameters in Emacs 23 for fonts Drew Adams
2008-08-27 17:01 ` Drew Adams
2008-08-27 23:41 ` Jason Rumney
2008-08-28 14:56 ` Drew Adams
2008-08-28 14:56 ` Drew Adams
2008-11-28 21:38 ` Drew Adams
2008-11-28 22:07 ` Drew Adams
2008-12-22 21:46 ` bug#1562: " Drew Adams
2008-11-28 22:14 ` Stephen Berman
2008-11-28 22:36 ` Drew Adams
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.