* Re: small preview-latex problem
2004-02-12 15:30 small preview-latex problem Fabian Braennstroem
@ 2004-02-12 13:32 ` David Kastrup
2004-02-12 22:08 ` Fabian Braennstroem
0 siblings, 1 reply; 5+ messages in thread
From: David Kastrup @ 2004-02-12 13:32 UTC (permalink / raw)
Fabian Braennstroem <f.braennstroem@gmx.de> writes:
> I get for the attached tex-file following error-message:
There is no file attached, and
M-x preview-report-bug RET
exists.
>
> error in process sentinel: End of Preview snippet 4 unexpected
>
> I read on http://article.gmane.org/gmane.emacs.latex.preview.devel/812 :
> This usually points to an error in the LaTeX processing.
>
> But what does that mean and how can I fix it?
It usually means that the output from LaTeX confuses preview-latex
when it is trying to find out which files are currently open.
Problem is that it decides this by the nesting of
(file.tex [3] [4]
and similar messages, and that other output may contain stuff that
looks similar. Two solutions exist: improve preview-latex, or change
the messages that are confusing to it. What the proper remedy is can
be best decided on the preview-latex-bug list. So please use
M-x preview-report-bug
> The normal Latex-process (C-c C-c) works fine.
Well, until you try to use C-c ` for locating errors. In which case
AUCTeX will probably be confused in the same way.
--
David Kastrup, Kriemhildstr. 15, 44793 Bochum
^ permalink raw reply [flat|nested] 5+ messages in thread
* small preview-latex problem
@ 2004-02-12 15:30 Fabian Braennstroem
2004-02-12 13:32 ` David Kastrup
0 siblings, 1 reply; 5+ messages in thread
From: Fabian Braennstroem @ 2004-02-12 15:30 UTC (permalink / raw)
Hello,
I get for the attached tex-file following error-message:
error in process sentinel: End of Preview snippet 4 unexpected
I read on http://article.gmane.org/gmane.emacs.latex.preview.devel/812 :
This usually points to an error in the LaTeX processing.
But what does that mean and how can I fix it? The normal Latex-process (C-c
C-c) works fine.
Greetings!
--
Fabian Braennstroem
Duesseldorf/Berlin
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: small preview-latex problem
2004-02-12 13:32 ` David Kastrup
@ 2004-02-12 22:08 ` Fabian Braennstroem
2004-02-12 22:13 ` Reiner Steib
0 siblings, 1 reply; 5+ messages in thread
From: Fabian Braennstroem @ 2004-02-12 22:08 UTC (permalink / raw)
[-- Attachment #1: Type: text/plain, Size: 457 bytes --]
David Kastrup <dak@gnu.org> writes:
> Fabian Braennstroem <f.braennstroem@gmx.de> writes:
>
>> I get for the attached tex-file following error-message:
>
> There is no file attached, and
I forgot it.
> the messages that are confusing to it. What the proper remedy is can
> be best decided on the preview-latex-bug list. So please use
> M-x preview-report-bug
Sorry, but my mailing does not work right now. I will do as soon as possible.
Greetings!
--
[-- Attachment #2: texfile --]
[-- Type: text/x-tex, Size: 1141 bytes --]
\documentclass[12pt,a4paper,german, ,pointlessnumbers]{article}
% \usepackage{ae}
% \usepackage{aecompl}
\usepackage[T1]{fontenc}
\usepackage[latin1]{inputenc}
\usepackage{float}
\usepackage{amsmath}
\usepackage{setspace}
\onehalfspacing
\usepackage{amssymb}
\makeatletter
\providecommand{\tabularnewline}{\\}
\usepackage{german}
% erstellen von PDF-Dateien
\usepackage[latin1]{inputenc}
\usepackage{german,a4}
\usepackage{babel}
%\makeatother
\begin{document}
\title{Symbolverzeichnis $\backslash$ Nomenclature}
\maketitle
\section{Lateinische Kleinbuchstaben $\backslash$ Lower-case Roman}
%
\begin{table}[H]
\begin{tabular}{|l|l|l|l|l|l|}
\hline
Abkürzung &
d. Name&
e. Name&
Größenordnung&
Einheit&
CHV\tabularnewline
\hline
&
&
&
&
&test
\tabularnewline
\hline
\end{tabular} \centering
\caption{Skalare}
\label{tab:latscalar}
\end{table}
%
\begin{table}[H]
\begin{tabular}{|l|l|l|l|l|l|}
\hline
Abkürzung &
d. Name&
e. Name&
Größenordnung&
Einheit&
CHV\tabularnewline
\hline
&
&
&
&
&
\tabularnewline
\hline
\end{tabular} \centering
\caption{Vektoren}
\label{tab:latvector}
\end{table}
\end{document}
[-- Attachment #3: Type: text/plain, Size: 40 bytes --]
Fabian Braennstroem
Duesseldorf/Berlin
[-- Attachment #4: Type: text/plain, Size: 151 bytes --]
_______________________________________________
Help-gnu-emacs mailing list
Help-gnu-emacs@gnu.org
http://mail.gnu.org/mailman/listinfo/help-gnu-emacs
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: small preview-latex problem
2004-02-12 22:08 ` Fabian Braennstroem
@ 2004-02-12 22:13 ` Reiner Steib
2004-02-13 11:20 ` Fabian Braennstroem
0 siblings, 1 reply; 5+ messages in thread
From: Reiner Steib @ 2004-02-12 22:13 UTC (permalink / raw)
On Thu, Feb 12 2004, Fabian Braennstroem wrote:
> David Kastrup <dak@gnu.org> writes:
[...]
>> So please use M-x preview-report-bug
> Sorry, but my mailing does not work right now. I will do as soon as possible.
Instead of sending the mail buffer in Emacs, you may copy the content
to your mail program.
I cannot say anything about you preview-latex problem, but you LaTeX
file has some problems. Please read CTAN:info/l2tabu/ (URL listed
below).
,----[ <URL:http://kohm.de.tf/markus/texidate.html> ]
| %% Below you'll find the result of running `TeXidate' on your document.
| %% <URL:http://kohm.de.tf/markus/texidate.html>
| %% Your sample has 90 lines, try to reduce it to 30 or less,
| %% if this is supposed to be a *minimal* sample.
| TeXidate 0.5d
| Copyright (c) 2003 Markus Kohm
|
| 1 (WARNING):: Empty optional argument!
| 19 (ERROR): package inputenc already loaded at line 5 with options
| "latin1". I'll ignore this load!
| 20 (ERROR): package german already loaded at line 17 with options "". I'll
| ignore this load!
| 20 (OBSOLETE): You should use one of geometry, typearea, vmargin instead of
| package a4.
| (FATAL): You should use only one of the packages babel (line 22), german
| (line 17).
|
| Done.
| Source:
| 1: \documentclass[12pt,a4paper,german, ,pointlessnumbers]{article}
| 2: % \usepackage{ae}
| 3: % \usepackage{aecompl}
| 4: \usepackage[T1]{fontenc}
| 5: \usepackage[latin1]{inputenc}
| 6: \usepackage{float}
| 7: \usepackage{amsmath}
| 8: \usepackage{setspace}
| 9: \onehalfspacing
| 10: \usepackage{amssymb}
| 11:
| 12: \makeatletter
| 13:
| 14:
| 15: \providecommand{\tabularnewline}{\\}
| 16:
| 17: \usepackage{german}
| 18: % erstellen von PDF-Dateien
| 19: \usepackage[latin1]{inputenc}
| 20: \usepackage{german,a4}
| 21:
| 22: \usepackage{babel}
| 23: %\makeatother
| 24: \begin{document}
| [...]
| 90: \end{document}
|
| Legend:
|
| The analyzation messages are composed of an optional line number, a message
| class in round brackets and a message text after a colon. Here comes the
| description of the message classes:
|
| (MESSAGE): Not an error but an information to the user.
| (WARNING): An expert may do this. But a new user should never be told to do
| so unless he is also told about the dangerous potentiality.
| (OBSOLETE): Something was detected, which should be done in another manner
| using LaTeX2e. New users should never spend time in obsolete things.
| They should ever use current LaTeX2e solutions.
| (ERROR): There seems to be an error. You should change this.
| (FATAL): This is a very, very dangerous error! You have to fix this!
|
| See also <URL:http://tug.ctan.org/tex-archive/info/l2tabu/>.
| %% End of `TeXidate' results.
`----
Bye, Reiner.
--
,,,
(o o)
---ooO-(_)-Ooo--- PGP key available via WWW http://rsteib.home.pages.de/
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: small preview-latex problem
2004-02-12 22:13 ` Reiner Steib
@ 2004-02-13 11:20 ` Fabian Braennstroem
0 siblings, 0 replies; 5+ messages in thread
From: Fabian Braennstroem @ 2004-02-13 11:20 UTC (permalink / raw)
Reiner Steib <4.uce.03.r.s@nurfuerspam.de> writes:
> On Thu, Feb 12 2004, Fabian Braennstroem wrote:
>
>> David Kastrup <dak@gnu.org> writes:
> [...]
>>> So please use M-x preview-report-bug
>> Sorry, but my mailing does not work right now. I will do as soon as possible.
>
> Instead of sending the mail buffer in Emacs, you may copy the content
> to your mail program.
Now, mailing with Gnus works again and used the bug list.
> I cannot say anything about you preview-latex problem, but you LaTeX
> file has some problems. Please read CTAN:info/l2tabu/ (URL listed
> below).
Did not know that document. Thanks!
>
> ,----[ <URL:http://kohm.de.tf/markus/texidate.html> ]
> | %% Below you'll find the result of running `TeXidate' on your document.
> | %% <URL:http://kohm.de.tf/markus/texidate.html>
> | %% Your sample has 90 lines, try to reduce it to 30 or less,
> | %% if this is supposed to be a *minimal* sample.
> | TeXidate 0.5d
> | Copyright (c) 2003 Markus Kohm
> |
> | 1 (WARNING):: Empty optional argument!
> | 19 (ERROR): package inputenc already loaded at line 5 with options
> | "latin1". I'll ignore this load!
> | 20 (ERROR): package german already loaded at line 17 with options "". I'll
> | ignore this load!
> | 20 (OBSOLETE): You should use one of geometry, typearea, vmargin instead of
> | package a4.
> | (FATAL): You should use only one of the packages babel (line 22), german
> | (line 17).
> |
Even correcting these error/warnings/obsoletes preview-latex gives me the same
error.
I will wait for the bug-list response.
Thanks anyways.
Greetings!
--
Fabian Braennstroem
Duesseldorf/Berlin
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2004-02-13 11:20 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-02-12 15:30 small preview-latex problem Fabian Braennstroem
2004-02-12 13:32 ` David Kastrup
2004-02-12 22:08 ` Fabian Braennstroem
2004-02-12 22:13 ` Reiner Steib
2004-02-13 11:20 ` Fabian Braennstroem
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).