From: Eli Zaretskii <eliz@gnu.org>
To: help-gnu-emacs@gnu.org
Subject: Re: What does 'run' do in cperl-mode?
Date: Tue, 29 Jul 2008 06:32:10 +0300 [thread overview]
Message-ID: <uk5f5pdqd.fsf@gnu.org> (raw)
In-Reply-To: <88821130-f989-49ac-b8b1-e3cb2f5c5271@1g2000pre.googlegroups.com>
> From: Xah Lee <xah@xahlee.org>
> Date: Mon, 28 Jul 2008 15:54:35 -0700 (PDT)
>
> After all, many emacs developers read here i was told.
Most of them don't, actually. Whoever told you otherwise was wrong.
And your ``problems'' are actually features as far as most Emacs
developers are concerned. The fact that Emacs behaves almost
identically on all platforms is considered by most Emacs developers
(and by many users) a virtue, not a disadvantage. Lennart is in
minority here.
So there's little chance your suggestions, even if you take them up
through the proper channels, will be accepted. Using Alt instead of
Meta in the manual means that we will need to have several variants of
the manual, one each for every platform/keyboard where the Meta key is
not Alt by default. That is a step backwards, not forward.
It's your choice, of course, but you might as well stop your campaign,
and use the energy elsewhere.
next prev parent reply other threads:[~2008-07-29 3:32 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-24 17:36 What does 'run' do in cperl-mode? formido
2008-07-25 3:02 ` formido
2008-07-25 14:55 ` Xah
2008-07-25 16:41 ` Ted Zlatanov
2008-07-25 21:55 ` Xah
2008-07-26 0:05 ` Florian Beck
2008-07-26 2:04 ` Xah
2008-07-26 0:33 ` Lennart Borgman (gmail)
[not found] ` <mailman.15432.1217032437.18990.help-gnu-emacs@gnu.org>
2008-07-26 1:41 ` Xah
2008-07-28 11:42 ` Nikolaj Schumacher
2008-07-28 11:58 ` Thien-Thi Nguyen
2008-07-28 13:39 ` Ted Zlatanov
2008-07-28 15:02 ` Xah Lee
2008-07-28 16:34 ` Lennart Borgman (gmail)
[not found] ` <mailman.15504.1217262880.18990.help-gnu-emacs@gnu.org>
2008-07-28 17:42 ` Xah Lee
2008-07-28 22:44 ` Lennart Borgman (gmail)
2008-07-28 19:57 ` Ted Zlatanov
2008-07-28 20:28 ` Xah Lee
2008-07-28 21:31 ` Ted Zlatanov
2008-07-28 22:09 ` Xah Lee
2008-07-29 14:33 ` Ted Zlatanov
2008-07-29 23:20 ` Xah
[not found] ` <mailman.15488.1217245359.18990.help-gnu-emacs@gnu.org>
2008-07-28 15:22 ` Xah Lee
2008-07-28 22:14 ` Nikolaj Schumacher
[not found] ` <mailman.15520.1217283300.18990.help-gnu-emacs@gnu.org>
2008-07-28 22:54 ` Xah Lee
2008-07-29 3:32 ` Eli Zaretskii [this message]
[not found] ` <mailman.15531.1217302334.18990.help-gnu-emacs@gnu.org>
2008-07-29 7:25 ` Xah
2008-07-29 7:46 ` Juanma Barranquero
[not found] ` <mailman.15537.1217317612.18990.help-gnu-emacs@gnu.org>
2008-07-29 8:41 ` Xah
2008-07-29 12:56 ` Juanma Barranquero
2008-07-29 13:34 ` William Case
2008-07-29 9:39 ` Phil Carmody
2008-07-29 12:55 ` Juanma Barranquero
2008-07-29 18:19 ` Colin S. Miller
2008-07-30 12:29 ` David Hansen
2008-07-30 13:34 ` Juanma Barranquero
2008-07-29 19:33 ` Eli Zaretskii
[not found] ` <mailman.15565.1217360044.18990.help-gnu-emacs@gnu.org>
2008-07-29 19:45 ` Joost Diepenmaat
2008-07-29 21:16 ` Xah
2008-07-30 3:34 ` Eli Zaretskii
[not found] ` <mailman.15577.1217388899.18990.help-gnu-emacs@gnu.org>
2008-07-30 3:55 ` Xah
2008-07-30 18:06 ` Eli Zaretskii
[not found] ` <mailman.15607.1217441187.18990.help-gnu-emacs@gnu.org>
2008-07-30 18:37 ` Xah
2008-08-23 21:22 ` David Combs
2008-08-23 21:41 ` Barry Margolin
2008-08-24 0:15 ` origin of the Meta key Xah
2008-08-24 3:38 ` Barry Margolin
2008-08-26 12:19 ` Allan Gottlieb
2008-07-29 22:25 ` What does 'run' do in cperl-mode? Andreas Eder
2008-07-29 23:35 ` Xah
2008-07-30 8:47 ` Andreas Eder
2008-07-30 9:49 ` Xah
2008-07-30 17:58 ` Eli Zaretskii
[not found] ` <mailman.15606.1217440713.18990.help-gnu-emacs@gnu.org>
2008-07-30 18:17 ` David Kastrup
2008-07-29 11:13 ` Nikolaj Schumacher
2008-07-29 11:52 ` Alan Mackenzie
[not found] ` <mailman.15542.1217330058.18990.help-gnu-emacs@gnu.org>
2008-07-29 12:05 ` Xah
2008-07-29 21:55 ` David Kastrup
[not found] ` <mailman.15545.1217332445.18990.help-gnu-emacs@gnu.org>
2008-07-29 12:44 ` Xah
2008-07-29 15:16 ` Nikolaj Schumacher
2008-07-29 18:27 ` Alan Mackenzie
[not found] ` <mailman.15550.1217344626.18990.help-gnu-emacs@gnu.org>
2008-07-29 21:32 ` Xah
2008-07-29 23:06 ` Nikolaj Schumacher
[not found] ` <mailman.15574.1217372768.18990.help-gnu-emacs@gnu.org>
2008-07-29 23:29 ` Xah
2008-07-31 19:07 ` Ted Zlatanov
2008-08-01 3:34 ` Xah
2008-08-01 7:18 ` Eli Zaretskii
[not found] ` <mailman.15688.1217575142.18990.help-gnu-emacs@gnu.org>
2008-08-01 8:00 ` Xah
2008-08-01 8:12 ` Nikolaj Schumacher
2008-08-01 15:17 ` Ted Zlatanov
2008-08-06 22:42 ` Harry Putnam
[not found] ` <mailman.15964.1218062567.18990.help-gnu-emacs@gnu.org>
2008-08-06 23:22 ` Xah
2008-08-07 6:39 ` David Kastrup
2008-08-07 8:24 ` Xah
[not found] ` <mailman.15564.1217356016.18990.help-gnu-emacs@gnu.org>
2008-07-29 22:50 ` Xah
2008-07-30 15:15 ` Alan Mackenzie
[not found] ` <mailman.15602.1217430872.18990.help-gnu-emacs@gnu.org>
2008-07-30 17:32 ` Xah
2008-07-30 17:45 ` Joost Kremers
2008-07-30 18:33 ` Xah
2008-07-30 19:40 ` Bastien
2008-07-30 0:28 ` namekuseijin
2008-07-27 3:05 ` formido
2008-07-27 11:36 ` Lennart Borgman (gmail)
2008-07-27 11:56 ` Thierry Volpiatto
-- strict thread matches above, loose matches on Subject: below --
2008-08-06 23:27 Xah
2008-08-07 14:27 ` Harry Putnam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://www.gnu.org/software/emacs/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=uk5f5pdqd.fsf@gnu.org \
--to=eliz@gnu.org \
--cc=help-gnu-emacs@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).