* can't global-set-key in emacs -nw
@ 2004-02-01 0:27 Joel Smith
2004-02-01 6:33 ` Eli Zaretskii
2004-02-01 16:56 ` Stefan Monnier
0 siblings, 2 replies; 6+ messages in thread
From: Joel Smith @ 2004-02-01 0:27 UTC (permalink / raw)
using xterm or aterm i can't set any keys using the shift key. for
example
(global-set-key [(shift right)] "\C-e")
won't do anything in aterm. in xterm it inserts 2C.
resetting the home, end keys doesn't work, and backspace starts help
in aterm. it's fine in xterm.
finally the mouse doesn't work.
any advice would be greatly appreciated.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: can't global-set-key in emacs -nw
2004-02-01 0:27 can't global-set-key in emacs -nw Joel Smith
@ 2004-02-01 6:33 ` Eli Zaretskii
2004-02-01 16:56 ` Stefan Monnier
1 sibling, 0 replies; 6+ messages in thread
From: Eli Zaretskii @ 2004-02-01 6:33 UTC (permalink / raw)
> Newsgroups: gnu.emacs.help
> From: Joel Smith <joelvsmith@earthlink.net>
> Date: Sun, 01 Feb 2004 00:27:42 GMT
>
> using xterm or aterm i can't set any keys using the shift key. for
> example
>
> (global-set-key [(shift right)] "\C-e")
>
> won't do anything in aterm. in xterm it inserts 2C.
>
> resetting the home, end keys doesn't work, and backspace starts help
> in aterm. it's fine in xterm.
You need to set up your keyboard configuration (sorry, I don't know
how exactly). Using "C-h l", you will see that Emacs doesn't get any
useful key codes when you press the problematic keys.
> finally the mouse doesn't work.
You mean, it doesn't work in Emacs? If so, you will have to set up
xt-mouse.el, I think. Basically, Emacs doesn't support the mouse on a
text terminal without some package such as xt-mouse.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: can't global-set-key in emacs -nw
2004-02-01 0:27 can't global-set-key in emacs -nw Joel Smith
2004-02-01 6:33 ` Eli Zaretskii
@ 2004-02-01 16:56 ` Stefan Monnier
2004-02-01 22:57 ` Peter Heslin
1 sibling, 1 reply; 6+ messages in thread
From: Stefan Monnier @ 2004-02-01 16:56 UTC (permalink / raw)
> using xterm or aterm i can't set any keys using the shift key. for
> example
> (global-set-key [(shift right)] "\C-e")
> won't do anything in aterm. in xterm it inserts 2C.
First, you need to make sure your terminal sends some useful byte-sequence
when you press those keys. Most terminal emulators send the same sequence
for shirt-right than for right, so Emacs simply can't tell the difference.
Once your terminal emulator is properly configured you need to tell Emacs
what that seuqnce is by appropriate (define-key function-key-map ...) calls.
See lisp/term/xterm.el for some default settings used if your terminal
is xterm. The same terminal emulator may send different sequences
depending on the configuration, so there's no standard sadly.
> resetting the home, end keys doesn't work, and backspace starts help
> in aterm. it's fine in xterm.
I.e. in your xterm, the backspace key sends code 127 (aka C-?) whereas in
your aterm it sends code 8 (aka C-h). Fix your aterm config.
> finally the mouse doesn't work.
M-x xterm-mouse-mode might help. I don't know if aterm supports this
xterm-specific extension.
Stefan
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: can't global-set-key in emacs -nw
2004-02-01 16:56 ` Stefan Monnier
@ 2004-02-01 22:57 ` Peter Heslin
2004-02-02 0:44 ` Stefan Monnier
0 siblings, 1 reply; 6+ messages in thread
From: Peter Heslin @ 2004-02-01 22:57 UTC (permalink / raw)
Stefan Monnier <monnier@iro.umontreal.ca> wrote in message news:<jwvad427nhg.fsf-monnier+gnu.emacs.help@asado.iro.umontreal.ca>...
> Once your terminal emulator is properly configured you need to tell Emacs
> what that seuqnce is by appropriate (define-key function-key-map ...) calls.
> See lisp/term/xterm.el for some default settings used if your terminal
> is xterm. The same terminal emulator may send different sequences
> depending on the configuration, so there's no standard sadly.
Assuming the user has not changed any escape sequences via resources
settings, is this still really the case?
On my (Debian x86) system, xterm and gnome-terminal (which gives $TERM
as "xterm") seem to agree on a quasi-standard set of escape sequences
for function-keys modified by shift, control, alt, shift-control and
shift-alt, all of which are distinct. But in term/xterm.el, only the
unmodified function-key escapes are translated. Is there a good
reason for this absence? Are the escape sequences for modified
function-keys in fact different in xterm from system to system? Is it
really true that life is messier than it seems on my system?
I am aware that the escape sequences for rxvt and rxvt-derived
terminal emulators are completely different, but again term/rxvt.el
translates some of these -- including control-modified function keys
-- but not all, such as shift-control modified function-keys. Again,
is there a good reason for this omission?
Peter
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: can't global-set-key in emacs -nw
2004-02-01 22:57 ` Peter Heslin
@ 2004-02-02 0:44 ` Stefan Monnier
2004-02-02 21:04 ` Peter Heslin
0 siblings, 1 reply; 6+ messages in thread
From: Stefan Monnier @ 2004-02-02 0:44 UTC (permalink / raw)
>> Once your terminal emulator is properly configured you need to tell Emacs
>> what that seuqnce is by appropriate (define-key function-key-map ...) calls.
>> See lisp/term/xterm.el for some default settings used if your terminal
>> is xterm. The same terminal emulator may send different sequences
>> depending on the configuration, so there's no standard sadly.
> Assuming the user has not changed any escape sequences via resources
> settings, is this still really the case?
Well, yes, it seems.
> On my (Debian x86) system, xterm and gnome-terminal (which gives $TERM
> as "xterm") seem to agree on a quasi-standard set of escape sequences
> for function-keys modified by shift, control, alt, shift-control and
> shift-alt, all of which are distinct.
Xterm on Redhat did not send the same sequences as xterm from XFree86, last
time I checked (which was a whilie back admittedly).
> But in term/xterm.el, only the unmodified function-key escapes are
> translated. Is there a good reason for this absence? Are the escape
> sequences for modified function-keys in fact different in xterm from
> system to system? Is it really true that life is messier than it seems on
> my system?
Since adding sequences to lisp/term/xterm.el is mostly harmless even if the
sequences are not used (as long as there's no conflict), the CVS version of
the file has more entries because I've added the sequences I've come across.
You may want to check that version of the file (from
savannah.gnu.org/projects/emacs, for example) and tell me if you know of
other sequences so I can add them.
> I am aware that the escape sequences for rxvt and rxvt-derived
> terminal emulators are completely different, but again term/rxvt.el
> translates some of these -- including control-modified function keys
> -- but not all, such as shift-control modified function-keys. Again,
> is there a good reason for this omission?
I wouldn't know. I never use rxvt.
Stefan
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: can't global-set-key in emacs -nw
2004-02-02 0:44 ` Stefan Monnier
@ 2004-02-02 21:04 ` Peter Heslin
0 siblings, 0 replies; 6+ messages in thread
From: Peter Heslin @ 2004-02-02 21:04 UTC (permalink / raw)
Stefan Monnier <monnier@iro.umontreal.ca> wrote in message news:<jwvwu7648no.fsf-monnier+gnu.emacs.help@asado.iro.umontreal.ca>...
> >> Once your terminal emulator is properly configured you need to tell Emacs
> >> what that seuqnce is by appropriate (define-key function-key-map ...) calls.
> >> See lisp/term/xterm.el for some default settings used if your terminal
> >> is xterm. The same terminal emulator may send different sequences
> >> depending on the configuration, so there's no standard sadly.
>
> > Assuming the user has not changed any escape sequences via resources
> > settings, is this still really the case?
>
> Well, yes, it seems.
Hi Stefan,
I decided to check on this. I went and downloaded the current source
of xterm from http://dickey.his.com/xterm/xterm.html, and there is a
document with it called ctlseqs.ms, which confirms that the behavior I
am seeing on my system is the documented, correct behavior of current
xterm. It has the following statement::
<quote>
In normal mode, i.e., a Sun/PC keyboard when the sunKeyboard resource
is
false, xterm recognizes function key modifiers which are parameters
appended before the final character of the control sequence.
Code Modifiers
---------------------------------
2 Shift
3 Alt
4 Shift + Alt
5 Control
6 Shift + Control
7 Alt + Control
8 Shift + Alt + Control
---------------------------------
For example, shift-F5 would be sent as CSI 1 5 ; 2 ~
If the alwaysUseMods resource is set, the Meta modifier also is recog
nized, making parameters 9 through 16.
</quote>
In other words, all of these combinations of modifiers on function
keys send distinct and documented escape sequences that Emacs could
and should interpret correctly.
So I think we should regard systems on which xterm behaves differently
as broken. I think it's more likely that it's just that some
distributions have older versions of xterm stuck in them out of
inertia, rather than that they are deliberately wanting different
behavior.
I would be happy to work on adding these escape sequences to
term/xterm.el, if you think such a patch would be acceptable in
principle. My only question would be the Alt/Meta issue. Xterm
clearly regards Alt as the more important key, with Meta available
additionally on some systems where the alwaysUseMods resource is set.
This might be taken to imply that the Alt combinations that xterm sees
ought to be translated to Emacs Meta, which is the more important key
for Emacs. But then people who have and use both Alt and Meta keys
would probably not like to see them switched around when using xterm.
Is there a way that we could have the best of both worlds? In other
words, can we send Alt to Emacs as Alt and Meta as Meta, but have it
easy for users who just use the Alt key as a Meta key not to have to
duplicate all of their Meta-Fx bindings as Alt-Fx also, just to work
under xterm? I suspect that I'm not the only one who would like to
have it so that Emacs just treats my Alt key as Meta both under X and
in xterm.
Peter
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2004-02-02 21:04 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-02-01 0:27 can't global-set-key in emacs -nw Joel Smith
2004-02-01 6:33 ` Eli Zaretskii
2004-02-01 16:56 ` Stefan Monnier
2004-02-01 22:57 ` Peter Heslin
2004-02-02 0:44 ` Stefan Monnier
2004-02-02 21:04 ` Peter Heslin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).