* set-frame-parameter
@ 2020-12-09 22:24 steve-humphreys
2020-12-09 22:58 ` set-frame-parameter Stephen Berman
0 siblings, 1 reply; 32+ messages in thread
From: steve-humphreys @ 2020-12-09 22:24 UTC (permalink / raw)
To: Help Gnu Emacs
Have started using fullscreen
(set-frame-parameter (selected-frame) 'fullscreen 'fullboth)
Then to maximised position
(set-frame-parameter (selected-frame) 'width 75)
(set-frame-parameter nil 'fullscreen 'fullheight)
But then doing the following small frame gets me an error
(set-frame-size nil 'width 58)
(set-frame-size nil 'height 13)
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-09 22:24 set-frame-parameter steve-humphreys
@ 2020-12-09 22:58 ` Stephen Berman
2020-12-09 23:04 ` set-frame-parameter steve-humphreys
0 siblings, 1 reply; 32+ messages in thread
From: Stephen Berman @ 2020-12-09 22:58 UTC (permalink / raw)
To: steve-humphreys; +Cc: Help Gnu Emacs
On Wed, 9 Dec 2020 23:24:39 +0100 steve-humphreys@gmx.com wrote:
> Have started using fullscreen
>
> (set-frame-parameter (selected-frame) 'fullscreen 'fullboth)
>
> Then to maximised position
>
> (set-frame-parameter (selected-frame) 'width 75)
> (set-frame-parameter nil 'fullscreen 'fullheight)
>
> But then doing the following small frame gets me an error
>
> (set-frame-size nil 'width 58)
> (set-frame-size nil 'height 13)
The WIDTH and HEIGHT arguments of set-frame-size should be numbers, like
this:
(set-frame-size nil 58 13)
Steve Berman
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-09 22:58 ` set-frame-parameter Stephen Berman
@ 2020-12-09 23:04 ` steve-humphreys
2020-12-09 23:13 ` set-frame-parameter Stephen Berman
2020-12-10 0:19 ` set-frame-parameter Michael Heerdegen
0 siblings, 2 replies; 32+ messages in thread
From: steve-humphreys @ 2020-12-09 23:04 UTC (permalink / raw)
To: Stephen Berman; +Cc: Help Gnu Emacs
> Sent: Wednesday, December 09, 2020 at 11:58 PM
> From: "Stephen Berman" <stephen.berman@gmx.net>
> To: steve-humphreys@gmx.com
> Cc: "Help Gnu Emacs" <help-gnu-emacs@gnu.org>
> Subject: Re: set-frame-parameter
>
> On Wed, 9 Dec 2020 23:24:39 +0100 steve-humphreys@gmx.com wrote:
>
> > Have started using fullscreen
> >
> > (set-frame-parameter (selected-frame) 'fullscreen 'fullboth)
> >
> > Then to maximised position
> >
> > (set-frame-parameter (selected-frame) 'width 75)
> > (set-frame-parameter nil 'fullscreen 'fullheight)
> >
> > But then doing the following small frame gets me an error
> >
> > (set-frame-size nil 'width 58)
> > (set-frame-size nil 'height 13)
>
> The WIDTH and HEIGHT arguments of set-frame-size should be numbers, like
> this:
>
> (set-frame-size nil 58 13)
I have tried it that way, but the frame stays at fullheight, rather than being set to 13.
> Steve Berman
>
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-09 23:04 ` set-frame-parameter steve-humphreys
@ 2020-12-09 23:13 ` Stephen Berman
2020-12-09 23:19 ` set-frame-parameter steve-humphreys
2020-12-10 0:19 ` set-frame-parameter Michael Heerdegen
1 sibling, 1 reply; 32+ messages in thread
From: Stephen Berman @ 2020-12-09 23:13 UTC (permalink / raw)
To: steve-humphreys; +Cc: Help Gnu Emacs
On Thu, 10 Dec 2020 00:04:53 +0100 steve-humphreys@gmx.com wrote:
>> Sent: Wednesday, December 09, 2020 at 11:58 PM
>> From: "Stephen Berman" <stephen.berman@gmx.net>
>> To: steve-humphreys@gmx.com
>> Cc: "Help Gnu Emacs" <help-gnu-emacs@gnu.org>
>> Subject: Re: set-frame-parameter
>>
>> On Wed, 9 Dec 2020 23:24:39 +0100 steve-humphreys@gmx.com wrote:
>>
>> > Have started using fullscreen
>> >
>> > (set-frame-parameter (selected-frame) 'fullscreen 'fullboth)
>> >
>> > Then to maximised position
>> >
>> > (set-frame-parameter (selected-frame) 'width 75)
>> > (set-frame-parameter nil 'fullscreen 'fullheight)
>> >
>> > But then doing the following small frame gets me an error
>> >
>> > (set-frame-size nil 'width 58)
>> > (set-frame-size nil 'height 13)
>>
>> The WIDTH and HEIGHT arguments of set-frame-size should be numbers, like
>> this:
>>
>> (set-frame-size nil 58 13)
>
> I have tried it that way, but the frame stays at fullheight, rather than being
> set to 13.
It works for me with emacs-26, emacs-27 and emacs-28 (master). Did you
try it after starting Emacs with -Q to suppress any customizations from
your init file?
Steve Berman
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-09 23:13 ` set-frame-parameter Stephen Berman
@ 2020-12-09 23:19 ` steve-humphreys
2020-12-09 23:26 ` set-frame-parameter Stephen Berman
0 siblings, 1 reply; 32+ messages in thread
From: steve-humphreys @ 2020-12-09 23:19 UTC (permalink / raw)
To: Stephen Berman; +Cc: Help Gnu Emacs
Have used "emacs -Q" as instructed.
Then executed the following three commands, one after the other.
The last command beeps the frame to fullheight.
(set-frame-parameter (selected-frame) 'fullscreen 'fullboth)
(set-frame-parameter (selected-frame) 'fullscreen 'fullheight)
(set-frame-size nil 58 13)
> Sent: Thursday, December 10, 2020 at 12:13 AM
> From: "Stephen Berman" <stephen.berman@gmx.net>
> To: steve-humphreys@gmx.com
> Cc: "Help Gnu Emacs" <help-gnu-emacs@gnu.org>
> Subject: Re: set-frame-parameter
>
> On Thu, 10 Dec 2020 00:04:53 +0100 steve-humphreys@gmx.com wrote:
>
> >> Sent: Wednesday, December 09, 2020 at 11:58 PM
> >> From: "Stephen Berman" <stephen.berman@gmx.net>
> >> To: steve-humphreys@gmx.com
> >> Cc: "Help Gnu Emacs" <help-gnu-emacs@gnu.org>
> >> Subject: Re: set-frame-parameter
> >>
> >> On Wed, 9 Dec 2020 23:24:39 +0100 steve-humphreys@gmx.com wrote:
> >>
> >> > Have started using fullscreen
> >> >
> >> > (set-frame-parameter (selected-frame) 'fullscreen 'fullboth)
> >> >
> >> > Then to maximised position
> >> >
> >> > (set-frame-parameter (selected-frame) 'width 75)
> >> > (set-frame-parameter nil 'fullscreen 'fullheight)
> >> >
> >> > But then doing the following small frame gets me an error
> >> >
> >> > (set-frame-size nil 'width 58)
> >> > (set-frame-size nil 'height 13)
> >>
> >> The WIDTH and HEIGHT arguments of set-frame-size should be numbers, like
> >> this:
> >>
> >> (set-frame-size nil 58 13)
> >
> > I have tried it that way, but the frame stays at fullheight, rather than being
> > set to 13.
>
> It works for me with emacs-26, emacs-27 and emacs-28 (master). Did you
> try it after starting Emacs with -Q to suppress any customizations from
> your init file?
>
> Steve Berman
>
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-09 23:19 ` set-frame-parameter steve-humphreys
@ 2020-12-09 23:26 ` Stephen Berman
2020-12-09 23:29 ` set-frame-parameter Stephen Berman
0 siblings, 1 reply; 32+ messages in thread
From: Stephen Berman @ 2020-12-09 23:26 UTC (permalink / raw)
To: steve-humphreys; +Cc: Help Gnu Emacs, Stephen Berman
On Thu, 10 Dec 2020 00:19:40 +0100 steve-humphreys@gmx.com wrote:
> Have used "emacs -Q" as instructed.
>
> Then executed the following three commands, one after the other.
>
> The last command beeps the frame to fullheight.
>
> (set-frame-parameter (selected-frame) 'fullscreen 'fullboth)
> (set-frame-parameter (selected-frame) 'fullscreen 'fullheight)
> (set-frame-size nil 58 13)
I can only reiterate that it works for me. Perhaps your window manager
is interfering somehow. The doc string of set-frame-size says:
(set-frame-size FRAME WIDTH HEIGHT &optional PIXELWISE)
Set text size of FRAME to WIDTH by HEIGHT, measured in characters.
Optional argument PIXELWISE non-nil means to measure in pixels. Note:
When ‘frame-resize-pixelwise’ is nil, some window managers may refuse to
honor a WIDTH that is not an integer multiple of the default frame font
width or a HEIGHT that is not an integer multiple of the default frame
font height.
FWIW I'm using xfwm4.
Steve Berman
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-09 23:26 ` set-frame-parameter Stephen Berman
@ 2020-12-09 23:29 ` Stephen Berman
2020-12-09 23:39 ` set-frame-parameter steve-humphreys
2020-12-09 23:43 ` set-frame-parameter steve-humphreys
0 siblings, 2 replies; 32+ messages in thread
From: Stephen Berman @ 2020-12-09 23:29 UTC (permalink / raw)
To: steve-humphreys; +Cc: Help Gnu Emacs
On Thu, 10 Dec 2020 00:26:24 +0100 Stephen Berman <stephen.berman@gmx.net> wrote:
> On Thu, 10 Dec 2020 00:19:40 +0100 steve-humphreys@gmx.com wrote:
>
>> Have used "emacs -Q" as instructed.
>>
>> Then executed the following three commands, one after the other.
>>
>> The last command beeps the frame to fullheight.
>>
>> (set-frame-parameter (selected-frame) 'fullscreen 'fullboth)
>> (set-frame-parameter (selected-frame) 'fullscreen 'fullheight)
>> (set-frame-size nil 58 13)
>
> I can only reiterate that it works for me. Perhaps your window manager
> is interfering somehow. The doc string of set-frame-size says:
>
> (set-frame-size FRAME WIDTH HEIGHT &optional PIXELWISE)
>
> Set text size of FRAME to WIDTH by HEIGHT, measured in characters.
> Optional argument PIXELWISE non-nil means to measure in pixels. Note:
> When ‘frame-resize-pixelwise’ is nil, some window managers may refuse to
> honor a WIDTH that is not an integer multiple of the default frame font
> width or a HEIGHT that is not an integer multiple of the default frame
> font height.
>
> FWIW I'm using xfwm4.
I meant to add: What happens when you try (set-frame-size nil 58 13 t)?
Steve Berman
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-09 23:29 ` set-frame-parameter Stephen Berman
@ 2020-12-09 23:39 ` steve-humphreys
2020-12-09 23:46 ` set-frame-parameter Stephen Berman
2020-12-09 23:43 ` set-frame-parameter steve-humphreys
1 sibling, 1 reply; 32+ messages in thread
From: steve-humphreys @ 2020-12-09 23:39 UTC (permalink / raw)
To: Stephen Berman; +Cc: Help Gnu Emacs
> Sent: Thursday, December 10, 2020 at 12:29 AM
> From: "Stephen Berman" <stephen.berman@gmx.net>
> To: steve-humphreys@gmx.com
> Cc: "Help Gnu Emacs" <help-gnu-emacs@gnu.org>
> Subject: Re: set-frame-parameter
>
> On Thu, 10 Dec 2020 00:26:24 +0100 Stephen Berman <stephen.berman@gmx.net> wrote:
>
> > On Thu, 10 Dec 2020 00:19:40 +0100 steve-humphreys@gmx.com wrote:
> >
> >> Have used "emacs -Q" as instructed.
> >>
> >> Then executed the following three commands, one after the other.
> >>
> >> The last command beeps the frame to fullheight.
> >>
> >> (set-frame-parameter (selected-frame) 'fullscreen 'fullboth)
> >> (set-frame-parameter (selected-frame) 'fullscreen 'fullheight)
> >> (set-frame-size nil 58 13)
> >
> > I can only reiterate that it works for me. Perhaps your window manager
> > is interfering somehow. The doc string of set-frame-size says:
> >
> > (set-frame-size FRAME WIDTH HEIGHT &optional PIXELWISE)
> >
> > Set text size of FRAME to WIDTH by HEIGHT, measured in characters.
> > Optional argument PIXELWISE non-nil means to measure in pixels. Note:
> > When ‘frame-resize-pixelwise’ is nil, some window managers may refuse to
> > honor a WIDTH that is not an integer multiple of the default frame font
> > width or a HEIGHT that is not an integer multiple of the default frame
> > font height.
> >
> > FWIW I'm using xfwm4.
>
> I meant to add: What happens when you try (set-frame-size nil 58 13 t)?
Doing (set-frame-size nil 58 13) works only if emacs has not been maximised.
> Steve Berman
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-09 23:29 ` set-frame-parameter Stephen Berman
2020-12-09 23:39 ` set-frame-parameter steve-humphreys
@ 2020-12-09 23:43 ` steve-humphreys
2020-12-09 23:47 ` set-frame-parameter Stephen Berman
1 sibling, 1 reply; 32+ messages in thread
From: steve-humphreys @ 2020-12-09 23:43 UTC (permalink / raw)
To: Stephen Berman; +Cc: Help Gnu Emacs
In the beginning of my init file I am using
(setq initial-frame-alist '((width . 75) (height . 32)))
> Sent: Thursday, December 10, 2020 at 12:29 AM
> From: "Stephen Berman" <stephen.berman@gmx.net>
> To: steve-humphreys@gmx.com
> Cc: "Help Gnu Emacs" <help-gnu-emacs@gnu.org>
> Subject: Re: set-frame-parameter
>
> On Thu, 10 Dec 2020 00:26:24 +0100 Stephen Berman <stephen.berman@gmx.net> wrote:
>
> > On Thu, 10 Dec 2020 00:19:40 +0100 steve-humphreys@gmx.com wrote:
> >
> >> Have used "emacs -Q" as instructed.
> >>
> >> Then executed the following three commands, one after the other.
> >>
> >> The last command beeps the frame to fullheight.
> >>
> >> (set-frame-parameter (selected-frame) 'fullscreen 'fullboth)
> >> (set-frame-parameter (selected-frame) 'fullscreen 'fullheight)
> >> (set-frame-size nil 58 13)
> >
> > I can only reiterate that it works for me. Perhaps your window manager
> > is interfering somehow. The doc string of set-frame-size says:
> >
> > (set-frame-size FRAME WIDTH HEIGHT &optional PIXELWISE)
> >
> > Set text size of FRAME to WIDTH by HEIGHT, measured in characters.
> > Optional argument PIXELWISE non-nil means to measure in pixels. Note:
> > When ‘frame-resize-pixelwise’ is nil, some window managers may refuse to
> > honor a WIDTH that is not an integer multiple of the default frame font
> > width or a HEIGHT that is not an integer multiple of the default frame
> > font height.
> >
> > FWIW I'm using xfwm4.
>
> I meant to add: What happens when you try (set-frame-size nil 58 13 t)?
>
> Steve Berman
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-09 23:39 ` set-frame-parameter steve-humphreys
@ 2020-12-09 23:46 ` Stephen Berman
2020-12-09 23:49 ` set-frame-parameter steve-humphreys
0 siblings, 1 reply; 32+ messages in thread
From: Stephen Berman @ 2020-12-09 23:46 UTC (permalink / raw)
To: steve-humphreys; +Cc: Help Gnu Emacs
On Thu, 10 Dec 2020 00:39:19 +0100 steve-humphreys@gmx.com wrote:
>> Sent: Thursday, December 10, 2020 at 12:29 AM
>> From: "Stephen Berman" <stephen.berman@gmx.net>
>> To: steve-humphreys@gmx.com
>> Cc: "Help Gnu Emacs" <help-gnu-emacs@gnu.org>
>> Subject: Re: set-frame-parameter
>>
>> On Thu, 10 Dec 2020 00:26:24 +0100 Stephen Berman <stephen.berman@gmx.net> wrote:
>>
>> > On Thu, 10 Dec 2020 00:19:40 +0100 steve-humphreys@gmx.com wrote:
>> >
>> >> Have used "emacs -Q" as instructed.
>> >>
>> >> Then executed the following three commands, one after the other.
>> >>
>> >> The last command beeps the frame to fullheight.
>> >>
>> >> (set-frame-parameter (selected-frame) 'fullscreen 'fullboth)
>> >> (set-frame-parameter (selected-frame) 'fullscreen 'fullheight)
>> >> (set-frame-size nil 58 13)
>> >
>> > I can only reiterate that it works for me. Perhaps your window manager
>> > is interfering somehow. The doc string of set-frame-size says:
>> >
>> > (set-frame-size FRAME WIDTH HEIGHT &optional PIXELWISE)
>> >
>> > Set text size of FRAME to WIDTH by HEIGHT, measured in characters.
>> > Optional argument PIXELWISE non-nil means to measure in pixels. Note:
>> > When ‘frame-resize-pixelwise’ is nil, some window managers may refuse to
>> > honor a WIDTH that is not an integer multiple of the default frame font
>> > width or a HEIGHT that is not an integer multiple of the default frame
>> > font height.
>> >
>> > FWIW I'm using xfwm4.
>>
>> I meant to add: What happens when you try (set-frame-size nil 58 13 t)?
>
>
> Doing (set-frame-size nil 58 13) works only if emacs has not been maximised.
And (set-frame-size nil 58 13 t)? (Note the `t' at the end.) If that
works, then I assume your window manager is preventing the non-pixelwise
resizing. If pixelwise resizing also doesn't work, then I'm out of
ideas. Maybe someone else will have a suggestion.
Steve Berman
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-09 23:43 ` set-frame-parameter steve-humphreys
@ 2020-12-09 23:47 ` Stephen Berman
2020-12-09 23:50 ` set-frame-parameter steve-humphreys
0 siblings, 1 reply; 32+ messages in thread
From: Stephen Berman @ 2020-12-09 23:47 UTC (permalink / raw)
To: steve-humphreys; +Cc: Help Gnu Emacs
On Thu, 10 Dec 2020 00:43:44 +0100 steve-humphreys@gmx.com wrote:
> In the beginning of my init file I am using
>
> (setq initial-frame-alist '((width . 75) (height . 32)))
But you said you also got the same issue when starting Emacs with -Q, so
your init file shouldn't matter.
Steve Berman
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-09 23:46 ` set-frame-parameter Stephen Berman
@ 2020-12-09 23:49 ` steve-humphreys
0 siblings, 0 replies; 32+ messages in thread
From: steve-humphreys @ 2020-12-09 23:49 UTC (permalink / raw)
To: Stephen Berman; +Cc: Help Gnu Emacs
> Sent: Thursday, December 10, 2020 at 12:46 AM
> From: "Stephen Berman" <stephen.berman@gmx.net>
> To: steve-humphreys@gmx.com
> Cc: "Help Gnu Emacs" <help-gnu-emacs@gnu.org>
> Subject: Re: set-frame-parameter
>
> On Thu, 10 Dec 2020 00:39:19 +0100 steve-humphreys@gmx.com wrote:
>
> >> Sent: Thursday, December 10, 2020 at 12:29 AM
> >> From: "Stephen Berman" <stephen.berman@gmx.net>
> >> To: steve-humphreys@gmx.com
> >> Cc: "Help Gnu Emacs" <help-gnu-emacs@gnu.org>
> >> Subject: Re: set-frame-parameter
> >>
> >> On Thu, 10 Dec 2020 00:26:24 +0100 Stephen Berman <stephen.berman@gmx.net> wrote:
> >>
> >> > On Thu, 10 Dec 2020 00:19:40 +0100 steve-humphreys@gmx.com wrote:
> >> >
> >> >> Have used "emacs -Q" as instructed.
> >> >>
> >> >> Then executed the following three commands, one after the other.
> >> >>
> >> >> The last command beeps the frame to fullheight.
> >> >>
> >> >> (set-frame-parameter (selected-frame) 'fullscreen 'fullboth)
> >> >> (set-frame-parameter (selected-frame) 'fullscreen 'fullheight)
> >> >> (set-frame-size nil 58 13)
> >> >
> >> > I can only reiterate that it works for me. Perhaps your window manager
> >> > is interfering somehow. The doc string of set-frame-size says:
> >> >
> >> > (set-frame-size FRAME WIDTH HEIGHT &optional PIXELWISE)
> >> >
> >> > Set text size of FRAME to WIDTH by HEIGHT, measured in characters.
> >> > Optional argument PIXELWISE non-nil means to measure in pixels. Note:
> >> > When ‘frame-resize-pixelwise’ is nil, some window managers may refuse to
> >> > honor a WIDTH that is not an integer multiple of the default frame font
> >> > width or a HEIGHT that is not an integer multiple of the default frame
> >> > font height.
> >> >
> >> > FWIW I'm using xfwm4.
> >>
> >> I meant to add: What happens when you try (set-frame-size nil 58 13 t)?
> >
> >
> > Doing (set-frame-size nil 58 13) works only if emacs has not been maximised.
>
> And (set-frame-size nil 58 13 t)? (Note the `t' at the end.) If that
> works, then I assume your window manager is preventing the non-pixelwise
> resizing. If pixelwise resizing also doesn't work, then I'm out of
> ideas. Maybe someone else will have a suggestion.
Same thing happens when using (set-frame-size nil 58 13 t). Only works if emacs is not
maximised. Thanks for bearing with me.
> Steve Berman
>
>
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-09 23:47 ` set-frame-parameter Stephen Berman
@ 2020-12-09 23:50 ` steve-humphreys
0 siblings, 0 replies; 32+ messages in thread
From: steve-humphreys @ 2020-12-09 23:50 UTC (permalink / raw)
To: Stephen Berman; +Cc: Help Gnu Emacs
> Sent: Thursday, December 10, 2020 at 12:47 AM
> From: "Stephen Berman" <stephen.berman@gmx.net>
> To: steve-humphreys@gmx.com
> Cc: "Help Gnu Emacs" <help-gnu-emacs@gnu.org>
> Subject: Re: set-frame-parameter
>
> On Thu, 10 Dec 2020 00:43:44 +0100 steve-humphreys@gmx.com wrote:
>
> > In the beginning of my init file I am using
> >
> > (setq initial-frame-alist '((width . 75) (height . 32)))
>
> But you said you also got the same issue when starting Emacs with -Q, so
> your init file shouldn't matter.
Correct, it does not matter. But I told you anyway.
> Steve Berman
>
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-09 23:04 ` set-frame-parameter steve-humphreys
2020-12-09 23:13 ` set-frame-parameter Stephen Berman
@ 2020-12-10 0:19 ` Michael Heerdegen
2020-12-10 0:38 ` set-frame-parameter Michael Heerdegen
2020-12-10 20:44 ` set-frame-parameter Stephen Berman
1 sibling, 2 replies; 32+ messages in thread
From: Michael Heerdegen @ 2020-12-10 0:19 UTC (permalink / raw)
To: help-gnu-emacs
steve-humphreys@gmx.com writes:
> I have tried it that way, but the frame stays at fullheight, rather
> than being set to 13.
FWIW, I'm seeing the same as you. I can turn off the frame's fullscreen
mode explicitly and then "it works":
(set-frame-parameter (selected-frame) 'fullscreen nil)
HTH,
Michael.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-10 0:19 ` set-frame-parameter Michael Heerdegen
@ 2020-12-10 0:38 ` Michael Heerdegen
2020-12-10 2:13 ` set-frame-parameter steve-humphreys
2020-12-10 20:44 ` set-frame-parameter Stephen Berman
1 sibling, 1 reply; 32+ messages in thread
From: Michael Heerdegen @ 2020-12-10 0:38 UTC (permalink / raw)
To: help-gnu-emacs
Michael Heerdegen <michael_heerdegen@web.de> writes:
> (set-frame-parameter (selected-frame) 'fullscreen nil)
Yes, when I'm reading the C source correctly (`adjust_frame_size')
there are different reasons why resizing can be inhibited.
One reason is when `frame_inhibit_resize', which checks for the
fullscreen variants, says so.
So what we see seems to be expected.
Michael.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-10 0:38 ` set-frame-parameter Michael Heerdegen
@ 2020-12-10 2:13 ` steve-humphreys
2020-12-10 2:33 ` set-frame-parameter steve-humphreys
0 siblings, 1 reply; 32+ messages in thread
From: steve-humphreys @ 2020-12-10 2:13 UTC (permalink / raw)
To: Michael Heerdegen; +Cc: help-gnu-emacs
> Sent: Thursday, December 10, 2020 at 1:38 AM
> From: "Michael Heerdegen" <michael_heerdegen@web.de>
> To: help-gnu-emacs@gnu.org
> Subject: Re: set-frame-parameter
>
> Michael Heerdegen <michael_heerdegen@web.de> writes:
>
> > (set-frame-parameter (selected-frame) 'fullscreen nil)
>
> Yes, when I'm reading the C source correctly (`adjust_frame_size')
> there are different reasons why resizing can be inhibited.
>
> One reason is when `frame_inhibit_resize', which checks for the
> fullscreen variants, says so.
>
> So what we see seems to be expected.
Thank you. I think there are some commands to get the width
and height of the screen. I would like to set the frame
explicitly after going full screen.
> Michael.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-10 2:13 ` set-frame-parameter steve-humphreys
@ 2020-12-10 2:33 ` steve-humphreys
2020-12-10 3:01 ` set-frame-parameter Michael Heerdegen
0 siblings, 1 reply; 32+ messages in thread
From: steve-humphreys @ 2020-12-10 2:33 UTC (permalink / raw)
To: steve-humphreys; +Cc: Michael Heerdegen, help-gnu-emacs
I wonder which way I should do things for fullscreen and re-sizing.
Is it good to use set-frame-parameter for fullscreen, and for re-sizing
using set-frame-size?
Have done as follows to make same size frame using set-frame-size.
(let ((w (frame-width)) (h (frame-height)))
(set-frame-parameter (selected-frame) 'fullscreen nil)
(set-frame-size nil w h))
> Sent: Thursday, December 10, 2020 at 3:13 AM
> From: steve-humphreys@gmx.com
> To: "Michael Heerdegen" <michael_heerdegen@web.de>
> Cc: help-gnu-emacs@gnu.org
> Subject: Re: set-frame-parameter
>
> > Sent: Thursday, December 10, 2020 at 1:38 AM
> > From: "Michael Heerdegen" <michael_heerdegen@web.de>
> > To: help-gnu-emacs@gnu.org
> > Subject: Re: set-frame-parameter
> >
> > Michael Heerdegen <michael_heerdegen@web.de> writes:
> >
> > > (set-frame-parameter (selected-frame) 'fullscreen nil)
> >
> > Yes, when I'm reading the C source correctly (`adjust_frame_size')
> > there are different reasons why resizing can be inhibited.
> >
> > One reason is when `frame_inhibit_resize', which checks for the
> > fullscreen variants, says so.
> >
> > So what we see seems to be expected.
>
> Thank you. I think there are some commands to get the width
> and height of the screen. I would like to set the frame
> explicitly after going full screen.
>
> > Michael.
>
>
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-10 2:33 ` set-frame-parameter steve-humphreys
@ 2020-12-10 3:01 ` Michael Heerdegen
2020-12-10 3:08 ` set-frame-parameter steve-humphreys
2020-12-10 3:17 ` set-frame-parameter steve-humphreys
0 siblings, 2 replies; 32+ messages in thread
From: Michael Heerdegen @ 2020-12-10 3:01 UTC (permalink / raw)
To: help-gnu-emacs
steve-humphreys@gmx.com writes:
> I wonder which way I should do things for fullscreen and re-sizing.
>
> Is it good to use set-frame-parameter for fullscreen, and for re-sizing
> using set-frame-size?
>
>
> Have done as follows to make same size frame using set-frame-size.
>
> (let ((w (frame-width)) (h (frame-height)))
> (set-frame-parameter (selected-frame) 'fullscreen nil)
> (set-frame-size nil w h))
I don't understand that code. You resize the frame to its...current
size?
Regards,
Michael.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-10 3:01 ` set-frame-parameter Michael Heerdegen
@ 2020-12-10 3:08 ` steve-humphreys
2020-12-10 3:55 ` set-frame-parameter Michael Heerdegen
2020-12-10 3:17 ` set-frame-parameter steve-humphreys
1 sibling, 1 reply; 32+ messages in thread
From: steve-humphreys @ 2020-12-10 3:08 UTC (permalink / raw)
To: Michael Heerdegen; +Cc: help-gnu-emacs
> Sent: Thursday, December 10, 2020 at 4:01 AM
> From: "Michael Heerdegen" <michael_heerdegen@web.de>
> To: help-gnu-emacs@gnu.org
> Subject: Re: set-frame-parameter
>
> steve-humphreys@gmx.com writes:
>
> > I wonder which way I should do things for fullscreen and re-sizing.
> >
> > Is it good to use set-frame-parameter for fullscreen, and for re-sizing
> > using set-frame-size?
> >
> >
> > Have done as follows to make same size frame using set-frame-size.
> >
> > (let ((w (frame-width)) (h (frame-height)))
> > (set-frame-parameter (selected-frame) 'fullscreen nil)
> > (set-frame-size nil w h))
>
> I don't understand that code. You resize the frame to its...current
> size?
Yes because the first time I go fullscreen, I remove the menu and edit bars.
> Regards,
>
> Michael.
>
>
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-10 3:01 ` set-frame-parameter Michael Heerdegen
2020-12-10 3:08 ` set-frame-parameter steve-humphreys
@ 2020-12-10 3:17 ` steve-humphreys
2020-12-10 3:42 ` set-frame-parameter steve-humphreys
2020-12-10 3:59 ` set-frame-parameter Michael Heerdegen
1 sibling, 2 replies; 32+ messages in thread
From: steve-humphreys @ 2020-12-10 3:17 UTC (permalink / raw)
To: Michael Heerdegen; +Cc: help-gnu-emacs
> Sent: Thursday, December 10, 2020 at 4:01 AM
> From: "Michael Heerdegen" <michael_heerdegen@web.de>
> To: help-gnu-emacs@gnu.org
> Subject: Re: set-frame-parameter
>
> steve-humphreys@gmx.com writes:
>
> > I wonder which way I should do things for fullscreen and re-sizing.
> >
> > Is it good to use set-frame-parameter for fullscreen, and for re-sizing
> > using set-frame-size?
> >
> >
> > Have done as follows to make same size frame using set-frame-size.
> >
> > (let ((w (frame-width)) (h (frame-height)))
> > (set-frame-parameter (selected-frame) 'fullscreen nil)
> > (set-frame-size nil w h))
>
> I don't understand that code. You resize the frame to its...current
> size?
Would like some advice of when I should use (selected-frame). Is it correct
to do as I have done? Then for set-frame-size I use nil.
> Regards,
>
> Michael.
>
>
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-10 3:17 ` set-frame-parameter steve-humphreys
@ 2020-12-10 3:42 ` steve-humphreys
2020-12-10 3:59 ` set-frame-parameter Michael Heerdegen
1 sibling, 0 replies; 32+ messages in thread
From: steve-humphreys @ 2020-12-10 3:42 UTC (permalink / raw)
To: steve-humphreys; +Cc: Michael Heerdegen, help-gnu-emacs
I have solved one problem, of not removing the maximise-minimise frame by using
(set-frame-parameter (selected-frame) 'fullscreen 'maximised)
> Sent: Thursday, December 10, 2020 at 4:17 AM
> From: steve-humphreys@gmx.com
> To: "Michael Heerdegen" <michael_heerdegen@web.de>
> Cc: help-gnu-emacs@gnu.org
> Subject: Re: set-frame-parameter
>
>
> > Sent: Thursday, December 10, 2020 at 4:01 AM
> > From: "Michael Heerdegen" <michael_heerdegen@web.de>
> > To: help-gnu-emacs@gnu.org
> > Subject: Re: set-frame-parameter
> >
> > steve-humphreys@gmx.com writes:
> >
> > > I wonder which way I should do things for fullscreen and re-sizing.
> > >
> > > Is it good to use set-frame-parameter for fullscreen, and for re-sizing
> > > using set-frame-size?
> > >
> > >
> > > Have done as follows to make same size frame using set-frame-size.
> > >
> > > (let ((w (frame-width)) (h (frame-height)))
> > > (set-frame-parameter (selected-frame) 'fullscreen nil)
> > > (set-frame-size nil w h))
> >
> > I don't understand that code. You resize the frame to its...current
> > size?
>
> Would like some advice of when I should use (selected-frame). Is it correct
> to do as I have done? Then for set-frame-size I use nil.
>
> > Regards,
> >
> > Michael.
> >
> >
> >
>
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-10 3:08 ` set-frame-parameter steve-humphreys
@ 2020-12-10 3:55 ` Michael Heerdegen
2020-12-10 4:09 ` set-frame-parameter steve-humphreys
0 siblings, 1 reply; 32+ messages in thread
From: Michael Heerdegen @ 2020-12-10 3:55 UTC (permalink / raw)
To: help-gnu-emacs
steve-humphreys@gmx.com writes:
> > > (let ((w (frame-width)) (h (frame-height)))
> > > (set-frame-parameter (selected-frame) 'fullscreen nil)
> > > (set-frame-size nil w h))
> >
> > I don't understand that code. You resize the frame to its...current
> > size?
>
> Yes because the first time I go fullscreen, I remove the menu and edit
> bars.
Now I want to know what you are trying to achieve.
Michael.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-10 3:17 ` set-frame-parameter steve-humphreys
2020-12-10 3:42 ` set-frame-parameter steve-humphreys
@ 2020-12-10 3:59 ` Michael Heerdegen
2020-12-10 4:11 ` set-frame-parameter steve-humphreys
1 sibling, 1 reply; 32+ messages in thread
From: Michael Heerdegen @ 2020-12-10 3:59 UTC (permalink / raw)
To: help-gnu-emacs
steve-humphreys@gmx.com writes:
> Would like some advice of when I should use (selected-frame). Is it
> correct to do as I have done? Then for set-frame-size I use nil.
It's not documented, though it should work when I look at the code.
Dunno if it works by accident or if it should be documented. Officially
it's your risk to rely on a behavior that's not documented.
Michael.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-10 3:55 ` set-frame-parameter Michael Heerdegen
@ 2020-12-10 4:09 ` steve-humphreys
0 siblings, 0 replies; 32+ messages in thread
From: steve-humphreys @ 2020-12-10 4:09 UTC (permalink / raw)
To: Michael Heerdegen; +Cc: help-gnu-emacs
> Sent: Thursday, December 10, 2020 at 4:55 AM
> From: "Michael Heerdegen" <michael_heerdegen@web.de>
> To: help-gnu-emacs@gnu.org
> Subject: Re: set-frame-parameter
>
> steve-humphreys@gmx.com writes:
>
> > > > (let ((w (frame-width)) (h (frame-height)))
> > > > (set-frame-parameter (selected-frame) 'fullscreen nil)
> > > > (set-frame-size nil w h))
> > >
> > > I don't understand that code. You resize the frame to its...current
> > > size?
> >
> > Yes because the first time I go fullscreen, I remove the menu and edit
> > bars.
>
> Now I want to know what you are trying to achieve.
When things are maximised, one usually cannot resize and move
the frame around. So I make three possibilities:
1. Fullscreen - Without menu and edit bars (removes window bar)
2. Fullscreen - With menu and edit bars, maximised but puts window bar back
3. Small window that I can move around.
> Michael.
>
>
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-10 3:59 ` set-frame-parameter Michael Heerdegen
@ 2020-12-10 4:11 ` steve-humphreys
2020-12-10 16:13 ` set-frame-parameter Drew Adams
0 siblings, 1 reply; 32+ messages in thread
From: steve-humphreys @ 2020-12-10 4:11 UTC (permalink / raw)
To: Michael Heerdegen; +Cc: help-gnu-emacs
> Sent: Thursday, December 10, 2020 at 4:59 AM
> From: "Michael Heerdegen" <michael_heerdegen@web.de>
> To: help-gnu-emacs@gnu.org
> Subject: Re: set-frame-parameter
>
> steve-humphreys@gmx.com writes:
>
> > Would like some advice of when I should use (selected-frame). Is it
> > correct to do as I have done? Then for set-frame-size I use nil.
>
> It's not documented, though it should work when I look at the code.
> Dunno if it works by accident or if it should be documented. Officially
> it's your risk to rely on a behavior that's not documented.
We could ask. This frame thing messed me up a little bit.
> Michael.
>
>
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* RE: set-frame-parameter
2020-12-10 4:11 ` set-frame-parameter steve-humphreys
@ 2020-12-10 16:13 ` Drew Adams
2020-12-10 17:26 ` set-frame-parameter Michael Heerdegen
2020-12-10 18:45 ` set-frame-parameter Pankaj Jangid
0 siblings, 2 replies; 32+ messages in thread
From: Drew Adams @ 2020-12-10 16:13 UTC (permalink / raw)
To: steve-humphreys, Michael Heerdegen; +Cc: help-gnu-emacs
Do we know whether it was explicitly by design
that you can't change the frame size when it's
fullscreen without first turning off fullscreen?
That seems odd to me, but perhaps it is by design
and there's a good reason for it. If not, maybe
it should be fixed...
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-10 16:13 ` set-frame-parameter Drew Adams
@ 2020-12-10 17:26 ` Michael Heerdegen
2020-12-10 18:31 ` set-frame-parameter Drew Adams
2020-12-10 18:45 ` set-frame-parameter Pankaj Jangid
1 sibling, 1 reply; 32+ messages in thread
From: Michael Heerdegen @ 2020-12-10 17:26 UTC (permalink / raw)
To: help-gnu-emacs
Drew Adams <drew.adams@oracle.com> writes:
> Do we know whether it was explicitly by design
> that you can't change the frame size when it's
> fullscreen without first turning off fullscreen?
>
> That seems odd to me, but perhaps it is by design
> and there's a good reason for it. If not, maybe
> it should be fixed...
With the X window system, that's the behavior for any maximized window,
in all window managers I used. Dunno if Emacs has a choice here, since
resizing and moving are X things.
How is the behavior in other `window-system's?
Michael.
^ permalink raw reply [flat|nested] 32+ messages in thread
* RE: set-frame-parameter
2020-12-10 17:26 ` set-frame-parameter Michael Heerdegen
@ 2020-12-10 18:31 ` Drew Adams
0 siblings, 0 replies; 32+ messages in thread
From: Drew Adams @ 2020-12-10 18:31 UTC (permalink / raw)
To: Michael Heerdegen, help-gnu-emacs
> > Do we know whether it was explicitly by design
> > that you can't change the frame size when it's
> > fullscreen without first turning off fullscreen?
> >
> > That seems odd to me, but perhaps it is by design
> > and there's a good reason for it. If not, maybe
> > it should be fixed...
>
> With the X window system, that's the behavior for any maximized window,
> in all window managers I used. Dunno if Emacs has a choice here, since
> resizing and moving are X things.
I meant should Emacs automatically turn off fullscreen if you issue a frame-size change? Wouldn't that be appropriate? If not, maybe the doc for each such size-changing function should say explicitly that it has no effect if fullscreen is on. (Maybe it already says that; I haven't checked.)
> How is the behavior in other `window-system's?
Dunno.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-10 16:13 ` set-frame-parameter Drew Adams
2020-12-10 17:26 ` set-frame-parameter Michael Heerdegen
@ 2020-12-10 18:45 ` Pankaj Jangid
2020-12-10 18:51 ` set-frame-parameter Drew Adams
1 sibling, 1 reply; 32+ messages in thread
From: Pankaj Jangid @ 2020-12-10 18:45 UTC (permalink / raw)
To: Drew Adams; +Cc: Michael Heerdegen, help-gnu-emacs, steve-humphreys
Drew Adams <drew.adams@oracle.com> writes:
> Do we know whether it was explicitly by design
> that you can't change the frame size when it's
> fullscreen without first turning off fullscreen?
>
> That seems odd to me, but perhaps it is by design
> and there's a good reason for it. If not, maybe
> it should be fixed...
Perhaps you want (toggle-frame-maximized) instead of
(toggle-frame-fullscreen)
As Michael pointed out, fullscreen things are ‘window-system’
things. Whereas a maximised window can be resized.
^ permalink raw reply [flat|nested] 32+ messages in thread
* RE: set-frame-parameter
2020-12-10 18:45 ` set-frame-parameter Pankaj Jangid
@ 2020-12-10 18:51 ` Drew Adams
2020-12-10 19:03 ` set-frame-parameter steve-humphreys
0 siblings, 1 reply; 32+ messages in thread
From: Drew Adams @ 2020-12-10 18:51 UTC (permalink / raw)
To: Pankaj Jangid; +Cc: Michael Heerdegen, help-gnu-emacs, steve-humphreys
> Perhaps you want (toggle-frame-maximized) instead of
> (toggle-frame-fullscreen)
>
> As Michael pointed out, fullscreen things are ‘window-system’
> things. Whereas a maximised window can be resized.
Whichever is preventing frame-size changes.
That's the point. If a user can work around
this inconvenience with an extra sexp then
Emacs itself could presumably make that
workaround unnecessary by doing it automatically.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: RE: set-frame-parameter
2020-12-10 18:51 ` set-frame-parameter Drew Adams
@ 2020-12-10 19:03 ` steve-humphreys
0 siblings, 0 replies; 32+ messages in thread
From: steve-humphreys @ 2020-12-10 19:03 UTC (permalink / raw)
To: Drew Adams; +Cc: Michael Heerdegen, help-gnu-emacs, Pankaj Jangid
> Sent: Thursday, December 10, 2020 at 7:51 PM
> From: "Drew Adams" <drew.adams@oracle.com>
> To: "Pankaj Jangid" <pankaj@codeisgreat.org>
> Cc: "Michael Heerdegen" <michael_heerdegen@web.de>, help-gnu-emacs@gnu.org, steve-humphreys@gmx.com
> Subject: RE: set-frame-parameter
>
> > Perhaps you want (toggle-frame-maximized) instead of
> > (toggle-frame-fullscreen)
> >
> > As Michael pointed out, fullscreen things are ‘window-system’
> > things. Whereas a maximised window can be resized.
>
> Whichever is preventing frame-size changes.
> That's the point. If a user can work around
> this inconvenience with an extra sexp then
> Emacs itself could presumably make that
> workaround unnecessary by doing it automatically.
It was a big stumbling block for me. In addition, the proper procedure for resizing was confusing
(set-frame-parameter, set-frame-size). Can one use either, both and mhich should be called first.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: set-frame-parameter
2020-12-10 0:19 ` set-frame-parameter Michael Heerdegen
2020-12-10 0:38 ` set-frame-parameter Michael Heerdegen
@ 2020-12-10 20:44 ` Stephen Berman
1 sibling, 0 replies; 32+ messages in thread
From: Stephen Berman @ 2020-12-10 20:44 UTC (permalink / raw)
To: Michael Heerdegen; +Cc: help-gnu-emacs
On Thu, 10 Dec 2020 01:19:45 +0100 Michael Heerdegen <michael_heerdegen@web.de> wrote:
> steve-humphreys@gmx.com writes:
>
>> I have tried it that way, but the frame stays at fullheight, rather
>> than being set to 13.
>
> FWIW, I'm seeing the same as you. I can turn off the frame's fullscreen
> mode explicitly and then "it works":
>
> (set-frame-parameter (selected-frame) 'fullscreen nil)
>
> HTH,
>
> Michael.
On Thu, 10 Dec 2020 08:13:29 -0800 (PST) Drew Adams <drew.adams@oracle.com> wrote:
> Do we know whether it was explicitly by design
> that you can't change the frame size when it's
> fullscreen without first turning off fullscreen?
>
> That seems odd to me, but perhaps it is by design
> and there's a good reason for it. If not, maybe
> it should be fixed...
It seems that my observations are at odds with those of the rest of you.
Nevertheless, when I start Emacs (26-28) with -Q and type C-j after each
of the following sexps in *scratch*, I get the frame width and height
values displayed and see the frame size change accordingly:
(frame-width)
80
(frame-height)
36
(set-frame-parameter nil 'fullscreen 'fullheight)
(frame-width)
80
(frame-height)
77
(set-frame-size nil 58 13)
(frame-width)
58
(frame-height)
13
I wonder why I get these results but others don't.
Steve Berman
^ permalink raw reply [flat|nested] 32+ messages in thread
end of thread, other threads:[~2020-12-10 20:44 UTC | newest]
Thread overview: 32+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-12-09 22:24 set-frame-parameter steve-humphreys
2020-12-09 22:58 ` set-frame-parameter Stephen Berman
2020-12-09 23:04 ` set-frame-parameter steve-humphreys
2020-12-09 23:13 ` set-frame-parameter Stephen Berman
2020-12-09 23:19 ` set-frame-parameter steve-humphreys
2020-12-09 23:26 ` set-frame-parameter Stephen Berman
2020-12-09 23:29 ` set-frame-parameter Stephen Berman
2020-12-09 23:39 ` set-frame-parameter steve-humphreys
2020-12-09 23:46 ` set-frame-parameter Stephen Berman
2020-12-09 23:49 ` set-frame-parameter steve-humphreys
2020-12-09 23:43 ` set-frame-parameter steve-humphreys
2020-12-09 23:47 ` set-frame-parameter Stephen Berman
2020-12-09 23:50 ` set-frame-parameter steve-humphreys
2020-12-10 0:19 ` set-frame-parameter Michael Heerdegen
2020-12-10 0:38 ` set-frame-parameter Michael Heerdegen
2020-12-10 2:13 ` set-frame-parameter steve-humphreys
2020-12-10 2:33 ` set-frame-parameter steve-humphreys
2020-12-10 3:01 ` set-frame-parameter Michael Heerdegen
2020-12-10 3:08 ` set-frame-parameter steve-humphreys
2020-12-10 3:55 ` set-frame-parameter Michael Heerdegen
2020-12-10 4:09 ` set-frame-parameter steve-humphreys
2020-12-10 3:17 ` set-frame-parameter steve-humphreys
2020-12-10 3:42 ` set-frame-parameter steve-humphreys
2020-12-10 3:59 ` set-frame-parameter Michael Heerdegen
2020-12-10 4:11 ` set-frame-parameter steve-humphreys
2020-12-10 16:13 ` set-frame-parameter Drew Adams
2020-12-10 17:26 ` set-frame-parameter Michael Heerdegen
2020-12-10 18:31 ` set-frame-parameter Drew Adams
2020-12-10 18:45 ` set-frame-parameter Pankaj Jangid
2020-12-10 18:51 ` set-frame-parameter Drew Adams
2020-12-10 19:03 ` set-frame-parameter steve-humphreys
2020-12-10 20:44 ` set-frame-parameter Stephen Berman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).