* ChangeLog and Version Control
@ 2002-09-26 6:59 Richard V. Molen
2002-09-26 8:24 ` Kai Großjohann
0 siblings, 1 reply; 8+ messages in thread
From: Richard V. Molen @ 2002-09-26 6:59 UTC (permalink / raw)
When using version control C-x C-q to check in (commit) a file into a
CVS repository, a buffer is presented in which to enter comments about
that change. C-c C-c then does the actual checkin and then presents
the ChangeLog with an entry automatically filled in. So far so good.
However, a C-x C-q on the ChangeLog pops up a the log buffer and C-c C-c
presents the re-revised ChangeLog again...
So, how do I keep the ChangeLog under CVS control and avoid this cyclic
behavior?
Perhaps there's a better method. I wonder how others maintain version
histories.
--
Richard V. Molen
Warning!!
Signature under construction, safety glasses required.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ChangeLog and Version Control
2002-09-26 6:59 ChangeLog and Version Control Richard V. Molen
@ 2002-09-26 8:24 ` Kai Großjohann
2002-09-26 8:39 ` Aman S Kohli
0 siblings, 1 reply; 8+ messages in thread
From: Kai Großjohann @ 2002-09-26 8:24 UTC (permalink / raw)
rmolen@socal.rr.com (Richard V. Molen) writes:
> When using version control C-x C-q to check in (commit) a file into a
> CVS repository, a buffer is presented in which to enter comments about
> that change. C-c C-c then does the actual checkin and then presents
> the ChangeLog with an entry automatically filled in. So far so good.
I think this is not the default behavior. The default behavior is
that the ChangeLog file is not changed after doing C-c C-c.
So something in your config must be doing it.
kai
--
~/.signature is: umop ap!sdn (Frank Nobis)
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ChangeLog and Version Control
2002-09-26 8:24 ` Kai Großjohann
@ 2002-09-26 8:39 ` Aman S Kohli
2002-09-26 14:29 ` Kai Großjohann
0 siblings, 1 reply; 8+ messages in thread
From: Aman S Kohli @ 2002-09-26 8:39 UTC (permalink / raw)
Kai.Grossjohann@CS.Uni-Dortmund.DE (Kai Großjohann) writes:
> rmolen@socal.rr.com (Richard V. Molen) writes:
>
> I think this is not the default behavior. The default behavior is
> that the ChangeLog file is not changed after doing C-c C-c.
>
> So something in your config must be doing it.
vc provides a function to use as part of the checkin hook. I got this from
<URL http://www.ece.utexas.edu/projects/courses/spring_02/ee379k/bow-20020213/HACKING>
(add-hook 'vc-checkin-hook 'vc-checkin-add-log)
;;; Insert the file's new log entries in ChangeLog.
(defun vc-checkin-add-log ()
(let ((log (find-change-log)))
(and log
(y-or-n-p (format "Update %s for %s changes? "
(file-relative-name log)
(file-relative-name buffer-file-name)))
(vc-comment-to-change-log nil log))))
Aman
> kai
> --
> ~/.signature is: umop ap!sdn (Frank Nobis)
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ChangeLog and Version Control
2002-09-26 8:39 ` Aman S Kohli
@ 2002-09-26 14:29 ` Kai Großjohann
2002-09-26 17:19 ` Stefan Monnier <foo@acm.com>
0 siblings, 1 reply; 8+ messages in thread
From: Kai Großjohann @ 2002-09-26 14:29 UTC (permalink / raw)
Aman S Kohli <akohli@iona.com> writes:
> Kai.Grossjohann@CS.Uni-Dortmund.DE (Kai Großjohann) writes:
>
>> rmolen@socal.rr.com (Richard V. Molen) writes:
>>
>> I think this is not the default behavior. The default behavior is
>> that the ChangeLog file is not changed after doing C-c C-c.
>>
>> So something in your config must be doing it.
>
> vc provides a function to use as part of the checkin hook. I got this from
>
> <URL http://www.ece.utexas.edu/projects/courses/spring_02/ee379k/bow-20020213/HACKING>
>
> (add-hook 'vc-checkin-hook 'vc-checkin-add-log)
> ;;; Insert the file's new log entries in ChangeLog.
> (defun vc-checkin-add-log ()
> (let ((log (find-change-log)))
> (and log
> (y-or-n-p (format "Update %s for %s changes? "
> (file-relative-name log)
> (file-relative-name buffer-file-name)))
> (vc-comment-to-change-log nil log))))
Aha. So one idea would be to redefine this function to do nothing
for ChangeLog files.
Another idea would be to do it the other way round: with C-x 4 a,
make some ChangeLog entries. Then use PCL-CVS which parses the
ChangeLog file and offers those entries as commit entries.
I like this approach because C-x 4 a is so smart: based on the
position of the cursor, it already finds the right function name (or
section name, for LaTeX files). Nifty. (C-x 4 a also works in diff
buffers -- super-nifty.)
kai
--
~/.signature is: umop ap!sdn (Frank Nobis)
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ChangeLog and Version Control
2002-09-26 14:29 ` Kai Großjohann
@ 2002-09-26 17:19 ` Stefan Monnier <foo@acm.com>
2002-09-26 21:34 ` Richard V. Molen
0 siblings, 1 reply; 8+ messages in thread
From: Stefan Monnier <foo@acm.com> @ 2002-09-26 17:19 UTC (permalink / raw)
>>>>> "Kai" == Kai Großjohann <Kai.Grossjohann@CS.Uni-Dortmund.DE> writes:
> (C-x 4 a also works in diff buffers -- super-nifty.)
Like music to my ears,
Stefan
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ChangeLog and Version Control
2002-09-26 17:19 ` Stefan Monnier <foo@acm.com>
@ 2002-09-26 21:34 ` Richard V. Molen
2002-09-27 7:08 ` Aman S Kohli
0 siblings, 1 reply; 8+ messages in thread
From: Richard V. Molen @ 2002-09-26 21:34 UTC (permalink / raw)
Thanks Aman, this was what I was looking for. I hacked up an
alternative that doesn't prompt -- "if it's the ChangeLog, don't add
the comment." (see below). It's the "I'm not an ELisper" version, but
it seems to work. Improvements are welcome.
It would be even nicer if I could keep the ChangeLog from 'popping up'
each time -- summary comments could be added explicitly w/ C-x 4 a.
Thank you Kai for your comments on C-x 4 a -- I'll have to try that
approach. It has more features than I realised.
******************************
;asks whether to automatically insert last Version control log entry into
;ChangeLog & allow ChangeLog editing. Answer 'n' after C-x C-q...C-c C-c
;of ChangeLog to prevent adding its log entry to itself.
(defun vc-checkin-add-log-no-prompt ()
(let ((log (find-change-log)))
(and log
(not (string-match
(format "%s" (file-relative-name log))
(format "%s" (file-relative-name buffer-file-name))))
(vc-comment-to-change-log nil log))))
(add-hook 'vc-checkin-hook 'vc-checkin-add-log-no-prompt)
(setq vc-command-messages t ;display version control backend messages?
vc-initial-comment t ;request initial log entry when adding a file.
)
******************************
--
Richard V. Molen
Warning!!
Signature under construction, safety glasses required.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ChangeLog and Version Control
2002-09-26 21:34 ` Richard V. Molen
@ 2002-09-27 7:08 ` Aman S Kohli
2002-09-27 15:42 ` Richard V. Molen
0 siblings, 1 reply; 8+ messages in thread
From: Aman S Kohli @ 2002-09-27 7:08 UTC (permalink / raw)
rmolen@socal.rr.com (Richard V. Molen) writes:
> Thanks Aman, this was what I was looking for.
hey, I just snarfed it from some website ;)
> Thank you Kai for your comments on C-x 4 a -- I'll have to try that
> approach. It has more features than I realised.
I too found them very useful and enlightening!
Aman
> --
> Richard V. Molen
>
> Warning!!
> Signature under construction, safety glasses required.
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2002-09-27 15:42 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-09-26 6:59 ChangeLog and Version Control Richard V. Molen
2002-09-26 8:24 ` Kai Großjohann
2002-09-26 8:39 ` Aman S Kohli
2002-09-26 14:29 ` Kai Großjohann
2002-09-26 17:19 ` Stefan Monnier <foo@acm.com>
2002-09-26 21:34 ` Richard V. Molen
2002-09-27 7:08 ` Aman S Kohli
2002-09-27 15:42 ` Richard V. Molen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).