* Fido mode @ 2022-04-05 16:53 binarydigitz01 via Users list for the GNU Emacs text editor 2022-04-06 12:30 ` Philip Kaludercic 0 siblings, 1 reply; 6+ messages in thread From: binarydigitz01 via Users list for the GNU Emacs text editor @ 2022-04-05 16:53 UTC (permalink / raw) To: help-gnu-emacs I recently tried to set up orderless with fido mode, but it didn't work. The maintainer of orderless helped me figure out that fido mode doesn't respect completion-style, and always sets it to flex. Can anyone explain to me why does it do that? Because I really liked it, but this is a deal breaker. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Fido mode 2022-04-05 16:53 Fido mode binarydigitz01 via Users list for the GNU Emacs text editor @ 2022-04-06 12:30 ` Philip Kaludercic 2022-04-08 2:31 ` FidoNet (was: Re: Fido mode) Emanuel Berg via Users list for the GNU Emacs text editor 0 siblings, 1 reply; 6+ messages in thread From: Philip Kaludercic @ 2022-04-06 12:30 UTC (permalink / raw) To: binarydigitz01 via Users list for the GNU Emacs text editor Cc: binarydigitz01 binarydigitz01 via Users list for the GNU Emacs text editor <help-gnu-emacs@gnu.org> writes: > I recently tried to set up orderless with fido mode, but it didn't > work. The maintainer of orderless helped me figure out that fido mode > doesn't respect completion-style, and always sets it to flex. Can > anyone explain to me why does it do that? Because I really liked it, > but this is a deal breaker. From what I understand, fido-mode reproduces the behaviour of ido-mode (hence fido -> "fake" ido I assume) using icomplete. The difference between ido and icomplete is that ido just remaps a few commands like find-find-file, write-file, ... manually with commands that do interactive narrowing and completion, while icomplete modifies the lower-level completion system itself, without changing any specific binding. That means that icomplete also works for commands ido doesn't know about (e.g. any command that uses completing-read). What fido does is to try and take advantage of this, while preserving the general behaviour of ido -- that to my knowledge doesn't have anything to do with the completion styles. So what you might be interested in is icomplete, instead of fido. Of course there are also other packages on ELPA such as Vertico and Ivy that are worth checking out too, to get a more complete picture. -- Philip Kaludercic ^ permalink raw reply [flat|nested] 6+ messages in thread
* FidoNet (was: Re: Fido mode) 2022-04-06 12:30 ` Philip Kaludercic @ 2022-04-08 2:31 ` Emanuel Berg via Users list for the GNU Emacs text editor 2022-04-10 4:56 ` Jean Louis 0 siblings, 1 reply; 6+ messages in thread From: Emanuel Berg via Users list for the GNU Emacs text editor @ 2022-04-08 2:31 UTC (permalink / raw) To: help-gnu-emacs Philip Kaludercic wrote: > From what I understand, fido-mode reproduces the behaviour > of ido-mode [...] hence fido -> "fake" ido [...] Clever! I thought it had something to do with FidoNet, which is a worldwide computer network that is used for communication between bulletin board systems (BBSes). It uses a store-and-forward system to exchange private (email) and public (forum) messages between the BBSes in the network [1] Sounds like a/some variety of the Usenet distributed model of data replication and propagation, which is today known as a "federation" or federative network architecture with redundant data https://dataswamp.org/~incal/pimgs/comp/net-arch.png Indeed pretty similar to https://dataswamp.org/~incal/pimgs/comp/usenet.png Is it client-server only there are many servers in parallel offering the same thing? Only I thought that was the cloud? [1] https://en.wikipedia.org/wiki/FidoNet -- underground experts united https://dataswamp.org/~incal ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: FidoNet (was: Re: Fido mode) 2022-04-08 2:31 ` FidoNet (was: Re: Fido mode) Emanuel Berg via Users list for the GNU Emacs text editor @ 2022-04-10 4:56 ` Jean Louis 2022-05-01 3:56 ` FidoNet TRS-80 0 siblings, 1 reply; 6+ messages in thread From: Jean Louis @ 2022-04-10 4:56 UTC (permalink / raw) To: help-gnu-emacs * Emanuel Berg via Users list for the GNU Emacs text editor <help-gnu-emacs@gnu.org> [2022-04-09 20:26]: > Philip Kaludercic wrote: > > > From what I understand, fido-mode reproduces the behaviour > > of ido-mode [...] hence fido -> "fake" ido [...] > > Clever! > > I thought it had something to do with FidoNet, which is > > a worldwide computer network that is used for communication > between bulletin board systems (BBSes). It uses > a store-and-forward system to exchange private (email) and > public (forum) messages between the BBSes in the network [1] I was one of peers in FidoNet for shorter time, and it was great feeling to be able to exchange emails worldwide. At that time we did not have access to Internet, but only BBS-es and FidoNet. > Sounds like a/some variety of the Usenet distributed model of > data replication and propagation, which is today known as > a "federation" or federative network architecture with Quite true. I guess it still functions and it may become important backup network when FidoNet https://www.fidonet.org/ -- Jean Take action in Free Software Foundation campaigns: https://www.fsf.org/campaigns In support of Richard M. Stallman https://stallmansupport.org/ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: FidoNet 2022-04-10 4:56 ` Jean Louis @ 2022-05-01 3:56 ` TRS-80 2022-05-01 4:35 ` FidoNet Samuel Banya 0 siblings, 1 reply; 6+ messages in thread From: TRS-80 @ 2022-05-01 3:56 UTC (permalink / raw) To: help-gnu-emacs Jean Louis <bugs@gnu.support> writes: > * Emanuel Berg writes: >> I thought it had something to do with FidoNet, which is >> >> a worldwide computer network that is used for communication >> between bulletin board systems (BBSes). It uses >> a store-and-forward system to exchange private (email) and >> public (forum) messages between the BBSes in the network [1] > > I was one of peers in FidoNet for shorter time, and it was great > feeling to be able to exchange emails worldwide. At that time we did > not have access to Internet, but only BBS-es and FidoNet. > I, too, remember the good old days of FidoNet! We are talking BBS days here, before Internet! In fact I was reading up on it again just the other day, and reliving some nostalgia of mis-spent youth. :) >> Sounds like a/some variety of the Usenet distributed model of >> data replication and propagation, which is today known as >> a "federation" or federative network architecture with Yes it started almost exactly like UUCP, with nodes calling each other directly. Later, like Usenet, it evolved evolved as the network grew. In case of FidoNet, into a system of zones with a hub and spoke model (to optimize what were, at that time, expensive long-distance calling rates, as this was all done over modems and phone lines). > I guess it still functions and it may become important backup network > when I couldn't help but to think the same thing. It gave me some warm fuzzies to think it's still going after all these many years. I think I will need to fire up the telnet and log on to some BBSes to check in, which I have not done in a very, very long time. :) Cheers, TRS-80 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: FidoNet 2022-05-01 3:56 ` FidoNet TRS-80 @ 2022-05-01 4:35 ` Samuel Banya 0 siblings, 0 replies; 6+ messages in thread From: Samuel Banya @ 2022-05-01 4:35 UTC (permalink / raw) To: Emanuel Berg On the same token, what are the best BBS's and Usenet groups for Emacs type stuff? Curious for old school posts, and file FTP sites related to that side of Emacs. Even workflows on how everyone accesses BBS's, even if its through Emacs would be cool too. Thanks, Sam On Sat, Apr 30, 2022, at 11:56 PM, TRS-80 wrote: > Jean Louis <bugs@gnu.support> writes: > > > * Emanuel Berg writes: > >> I thought it had something to do with FidoNet, which is > >> > >> a worldwide computer network that is used for communication > >> between bulletin board systems (BBSes). It uses > >> a store-and-forward system to exchange private (email) and > >> public (forum) messages between the BBSes in the network [1] > > > > I was one of peers in FidoNet for shorter time, and it was great > > feeling to be able to exchange emails worldwide. At that time we did > > not have access to Internet, but only BBS-es and FidoNet. > > > > I, too, remember the good old days of FidoNet! We are talking BBS days > here, before Internet! > > In fact I was reading up on it again just the other day, and reliving > some nostalgia of mis-spent youth. :) > > >> Sounds like a/some variety of the Usenet distributed model of > >> data replication and propagation, which is today known as > >> a "federation" or federative network architecture with > > Yes it started almost exactly like UUCP, with nodes calling each other > directly. Later, like Usenet, it evolved evolved as the network grew. > In case of FidoNet, into a system of zones with a hub and spoke model > (to optimize what were, at that time, expensive long-distance calling > rates, as this was all done over modems and phone lines). > > > I guess it still functions and it may become important backup network > > when > > I couldn't help but to think the same thing. > > It gave me some warm fuzzies to think it's still going after all these > many years. I think I will need to fire up the telnet and log on to > some BBSes to check in, which I have not done in a very, very long time. > :) > > Cheers, > TRS-80 > > > ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-05-01 4:35 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2022-04-05 16:53 Fido mode binarydigitz01 via Users list for the GNU Emacs text editor 2022-04-06 12:30 ` Philip Kaludercic 2022-04-08 2:31 ` FidoNet (was: Re: Fido mode) Emanuel Berg via Users list for the GNU Emacs text editor 2022-04-10 4:56 ` Jean Louis 2022-05-01 3:56 ` FidoNet TRS-80 2022-05-01 4:35 ` FidoNet Samuel Banya
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).