unofficial mirror of help-gnu-emacs@gnu.org
 help / color / mirror / Atom feed
* Re: Scrolling the screen vertically
@ 2012-07-04 18:19 Valera Rozuvan
  2012-07-04 20:20 ` Eli Zaretskii
  0 siblings, 1 reply; 5+ messages in thread
From: Valera Rozuvan @ 2012-07-04 18:19 UTC (permalink / raw)
  To: help-gnu-emacs

From: Eli Zaretskii
> Did you know about "C-x <" and "C-x >"?  If they don't do what you
> want, then please explain more.

Those commands are not exactly what I am looking for. I will try to
explain myself in detail.

Suppose you have a line that is 200 characters long. If you run the
command C-a, then the cursor moves to the beginning of the line, and
you are at column 0. If you run the command C-e, then the cursor moves
to the end of the line, and you are at column 199.

Now, suppose the screen is 80 columns wide (you have two windows open
side by side). If the cursor is positioned at column X, I want to be
able to do the following:

1.) move to the column X + ((80 / 2) - 2) (scroll by half the screen's
width to the right, with an overlap of 2 columns)
2.) move to the column X - ((80 / 2) - 2) (scroll by half the screen's
width to the left, with an overlap of 2 columns)
3.) move the cursor to Y - 2, where Y is the right-most column visible
on the screen
4.) move the cursor to Z + 2, where Z is the left-most column visible
on the screen

Note that cases 1 and 3 are not the same, because the cursor can be
positioned anywhere (for example X = Y - 2). Same with cases 2 and 4.

So I need functions to determine X, Y, Z, and the screen's width. Then
I can write a function which will move the cursor forward and backward
by a calculated number of characters.

Regards,
Valera Rozuvan



^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: Scrolling the screen vertically
@ 2012-07-06 15:38 Valera Rozuvan
  0 siblings, 0 replies; 5+ messages in thread
From: Valera Rozuvan @ 2012-07-06 15:38 UTC (permalink / raw)
  To: help-gnu-emacs

From: Eli Zaretskii
> Look at window-width and window-hscroll, I think they give you all you
> need.  The functions to actually scroll are those bound to the keys I
> mentioned, and you can control by how much to scroll by giving them an
> argument (see their doc strings).

Thanks! window-width and window-hscroll actually offer everything that
I need. Here is what I came up with:

(defun goto-window-left-margin ()
    "Move point to the left edge of the window."
    (interactive)
    (setq leftEdge (window-hscroll))
    (move-to-column leftEdge))
(defun goto-window-right-margin ()
    "Move point to the right edge of the window."
    (interactive)
    (setq rightEdge (+ (window-hscroll) (window-width)))
    (move-to-column rightEdge))
(defun goto-window-middle ()
    "Move point to the middle of the window."
    (interactive)
    (setq rightEdge (+ (window-hscroll) (window-width)))
    (move-to-column (- rightEdge (floor (* 0.5 (window-width))))))
(global-set-key [C-return] 'goto-window-left-margin)
(global-set-key [M-return] 'goto-window-right-margin)
(global-set-key [M-C-return] 'goto-window-middle)

Now if I want to peek off the screen to the right (or left), I do
M-return, see what is hidden, and then I do C-return, which brings me
back to my original point. Also I added a shortcut to move the cursor
to the center of the screen.

Regards,
Valera Rozuvan



^ permalink raw reply	[flat|nested] 5+ messages in thread
* Scrolling the screen vertically
@ 2012-07-04 14:29 Valera Rozuvan
  2012-07-04 15:34 ` Eli Zaretskii
  0 siblings, 1 reply; 5+ messages in thread
From: Valera Rozuvan @ 2012-07-04 14:29 UTC (permalink / raw)
  To: help-gnu-emacs

Hi all,

While horizontal scrolling of a screen is easy with the default key
combos C-v and M-v, most times I run into the problem of quickly
scrolling sideways. This is a problem for me because I use

(setq truncate-lines t)

in my ~/.emacs

There is the C-a to go to the beginning of the line, and also the C-e
to go to the end of the line. But if the line is very long, I would
like fine-grained control - to scroll by the screen's width with an
overlap of a few characters. Currently I use M-f and M-b to go right
or left by words (this is faster then just using the right and left
keys on the keyboard to move by a single character), but this method
is still slow.

Ideally I would like to write some key combo which lets me peek on any
off-screen text (lines that are longer than the screen's width), and
then go back to the location of the cursor (ideally the cursor
shouldn't move). Is it possible to shift the "view-port" (don't know
how to properly call it) 50 characters left or right?

Any input on this problem will be appreciated.

Regards,
Valera Rozuvan



^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2012-07-06 15:38 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-07-04 18:19 Scrolling the screen vertically Valera Rozuvan
2012-07-04 20:20 ` Eli Zaretskii
  -- strict thread matches above, loose matches on Subject: below --
2012-07-06 15:38 Valera Rozuvan
2012-07-04 14:29 Valera Rozuvan
2012-07-04 15:34 ` Eli Zaretskii

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).