* Re: "emacs --daemon" does not load init file
[not found] <mailman.1212.1227617005.26697.help-gnu-emacs@gnu.org>
@ 2008-11-25 13:27 ` Richard Riley
2008-11-25 13:59 ` Richard Riley
2008-11-25 16:08 ` Chengqi(Lars) Song
0 siblings, 2 replies; 8+ messages in thread
From: Richard Riley @ 2008-11-25 13:27 UTC (permalink / raw
To: help-gnu-emacs
"Chengqi(Lars) Song" <songcq@gmail.com> writes:
> Hi,
>
> I'm using emacs23 snapshot, now it has a fancy function "emacs
> --daemon" to run emacs in background. But when I use "emacsclient -c"
> to connect to the daemon, I found that my ~/.emacs is not
> loaded. That's so bad, is there anyone experienced in emacs daemon?
> Thanks.
>
> best
> lars
using CVS emacs, I use "emacs -daemon" and it executes the .emacs or
init fine. "--" or "-" both seem to work from a bash shell btw.
Are you sure there is no error in your .emacs? Did you run emacs -daemon
from the command line where you can see any error output?
Just to be sure - you dont expect emacs -c to run the .emacs?
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: "emacs --daemon" does not load init file
2008-11-25 13:27 ` "emacs --daemon" does not load init file Richard Riley
@ 2008-11-25 13:59 ` Richard Riley
2008-11-25 16:08 ` Chengqi(Lars) Song
1 sibling, 0 replies; 8+ messages in thread
From: Richard Riley @ 2008-11-25 13:59 UTC (permalink / raw
To: help-gnu-emacs
Richard Riley <rileyrgdev@gmail.com> writes:
> "Chengqi(Lars) Song" <songcq@gmail.com> writes:
>
>> Hi,
>>
>> I'm using emacs23 snapshot, now it has a fancy function "emacs
>> --daemon" to run emacs in background. But when I use "emacsclient -c"
>> to connect to the daemon, I found that my ~/.emacs is not
>> loaded. That's so bad, is there anyone experienced in emacs daemon?
>> Thanks.
>>
>> best
>> lars
>
> using CVS emacs, I use "emacs -daemon" and it executes the .emacs or
> init fine. "--" or "-" both seem to work from a bash shell btw.
>
> Are you sure there is no error in your .emacs? Did you run emacs -daemon
> from the command line where you can see any error output?
>
> Just to be sure - you dont expect emacs -c to run the .emacs?
^^^^^^^^^^^^^^^^^^^^^
I meant : "emacsclient -c"
And if Debian based Linux : And did you be sure to run "sudo update-alternatives --config" for emacs
and emacsclient?
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: "emacs --daemon" does not load init file
2008-11-25 13:27 ` "emacs --daemon" does not load init file Richard Riley
2008-11-25 13:59 ` Richard Riley
@ 2008-11-25 16:08 ` Chengqi(Lars) Song
2008-11-25 19:45 ` Tassilo Horn
2008-11-25 22:44 ` "emacs --daemon" does not load init file Peter Dyballa
1 sibling, 2 replies; 8+ messages in thread
From: Chengqi(Lars) Song @ 2008-11-25 16:08 UTC (permalink / raw
To: help-gnu-emacs
Hi,
Yeah, when I run "emacs --daemon" in console it shows this error
message:
error: Fontset `tty' does not exist
But if run "emacs" there is no such message. Note that my emacs is
emacs-gtk.
The font setting script in my .emacs is:
;; font setting
(set-default-font "Bitstream Vera Sans Mono-10")
(set-fontset-font (frame-parameter nil 'font)
'chinese-gbk '("Microsfot Yahei-10" . "unicode-bmp"))
Is there anything wrong?
Best
Lars
On Tue, 25 Nov 2008, Richard Riley wrote:
>
> "Chengqi(Lars) Song" <songcq@gmail.com> writes:
>
> > Hi,
> >
> > I'm using emacs23 snapshot, now it has a fancy function "emacs
> > --daemon" to run emacs in background. But when I use "emacsclient -c"
> > to connect to the daemon, I found that my ~/.emacs is not
> > loaded. That's so bad, is there anyone experienced in emacs daemon?
> > Thanks.
> >
> > best
> > lars
>
> using CVS emacs, I use "emacs -daemon" and it executes the .emacs or
> init fine. "--" or "-" both seem to work from a bash shell btw.
>
> Are you sure there is no error in your .emacs? Did you run emacs -daemon
> from the command line where you can see any error output?
>
> Just to be sure - you dont expect emacs -c to run the .emacs?
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: "emacs --daemon" does not load init file
2008-11-25 16:08 ` Chengqi(Lars) Song
@ 2008-11-25 19:45 ` Tassilo Horn
2008-11-26 2:42 ` Chengqi(Lars) Song
2008-11-25 22:44 ` "emacs --daemon" does not load init file Peter Dyballa
1 sibling, 1 reply; 8+ messages in thread
From: Tassilo Horn @ 2008-11-25 19:45 UTC (permalink / raw
To: help-gnu-emacs
"Chengqi(Lars) Song" <songcq@gmail.com> writes:
Hi!
> Yeah, when I run "emacs --daemon" in console it shows this error
> message:
>
> error: Fontset `tty' does not exist
>
> But if run "emacs" there is no such message. Note that my emacs is
> emacs-gtk.
>
> The font setting script in my .emacs is:
>
> ;; font setting
> (set-default-font "Bitstream Vera Sans Mono-10")
> (set-fontset-font (frame-parameter nil 'font)
> 'chinese-gbk '("Microsfot Yahei-10" . "unicode-bmp"))
>
> Is there anything wrong?
As I've said in <87od03j3vf.fsf@thinkpad.tsdh.de> there's no initial
frame when starting emacs as daemon, so you cannot get frame parameters.
Maybe adding the code to `window-setup-hook' will work. Or simply use
`M-x customize-face' for font settings.
Bye,
Tassilo
--
Richard Stallman doesn't need it, since he already read the internet.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: "emacs --daemon" does not load init file
2008-11-25 16:08 ` Chengqi(Lars) Song
2008-11-25 19:45 ` Tassilo Horn
@ 2008-11-25 22:44 ` Peter Dyballa
1 sibling, 0 replies; 8+ messages in thread
From: Peter Dyballa @ 2008-11-25 22:44 UTC (permalink / raw
To: Chengqi Song; +Cc: help-gnu-emacs
Am 25.11.2008 um 17:08 schrieb Chengqi(Lars) Song:
> ;; font setting
> (set-default-font "Bitstream Vera Sans Mono-10")
> (set-fontset-font (frame-parameter nil 'font)
> 'chinese-gbk '("Microsfot Yahei-10" . "unicode-
> bmp"))
>
> Is there anything wrong?
At least the second statement is only applicable when GNU Emacs runs
in windowing environment. You should execute it, and maybe more, only
when the window-system is not nil.
My init file is organised like this – and I can launch GNU Emacs
23.0.60 as daemon.
--
Greetings
Pete
Never be led astray onto the path of virtue
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: "emacs --daemon" does not load init file
2008-11-25 19:45 ` Tassilo Horn
@ 2008-11-26 2:42 ` Chengqi(Lars) Song
2008-11-26 7:43 ` Adding toolbar buttons Maindoor
0 siblings, 1 reply; 8+ messages in thread
From: Chengqi(Lars) Song @ 2008-11-26 2:42 UTC (permalink / raw
To: help-gnu-emacs
I changed the frame related settings to:
(add-hook 'window-setup-hook
(lambda nil
;; font setting
(set-default-font "Bitstream Vera Sans Mono-10")
(set-fontset-font (frame-parameter nil 'font)
'chinese-gbk '("Microsfot Yahei-10" . "unicode-bmp"))
;; window positioning
(setq default-frame-alist '((top . 0) (left . 0) (width . 100) (height . 40)))
))
Now emacs-daemon can startup without any error message:
loading.....
loading.....
loading.....
starting emacs daemon....
But then I found emacsclient -c can not connect to emacs daemon, and "ps ax|grep emacs" returns nothing. That means emacs daemon failed to startup... It's so wierd, and I don't know why...
On Tue, 25 Nov 2008, Tassilo Horn wrote:
> As I've said in <87od03j3vf.fsf@thinkpad.tsdh.de> there's no initial
> frame when starting emacs as daemon, so you cannot get frame parameters.
> Maybe adding the code to `window-setup-hook' will work. Or simply use
> `M-x customize-face' for font settings.
>
> Bye,
> Tassilo
> --
> Richard Stallman doesn't need it, since he already read the internet.
>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Adding toolbar buttons
2008-11-26 2:42 ` Chengqi(Lars) Song
@ 2008-11-26 7:43 ` Maindoor
2008-11-26 13:18 ` Maindoor
0 siblings, 1 reply; 8+ messages in thread
From: Maindoor @ 2008-11-26 7:43 UTC (permalink / raw
To: help-gnu-emacs
[-- Attachment #1: Type: text/plain, Size: 236 bytes --]
I want to add toolbar buttons, I searched around and found
that it could be done using toolbar utils. Can anyone tell
where I can find
toolbar-utils.el, edit-toolbar.el & xemacs-toolbar.el
? I am using kubuntu 8.04.
Thanks.
[-- Attachment #2: Type: text/html, Size: 407 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Adding toolbar buttons
2008-11-26 7:43 ` Adding toolbar buttons Maindoor
@ 2008-11-26 13:18 ` Maindoor
0 siblings, 0 replies; 8+ messages in thread
From: Maindoor @ 2008-11-26 13:18 UTC (permalink / raw
To: help-gnu-emacs
[-- Attachment #1: Type: text/plain, Size: 603 bytes --]
Looks like the functionality is there, but i cannot get it
to work like tool-bar-add-item. If someone has tried it
do let me know.
--- On Wed, 11/26/08, Maindoor <sanjeevfiles@yahoo.com> wrote:
From: Maindoor <sanjeevfiles@yahoo.com>
Subject: Adding toolbar buttons
To: "help-gnu-emacs" <help-gnu-emacs@gnu.org>
Date: Wednesday, November 26, 2008, 1:13 PM
I want to add toolbar buttons, I searched around and found
that it could be done using toolbar utils. Can anyone tell
where I can find
toolbar-utils.el, edit-toolbar.el & xemacs-toolbar.el
? I am using kubuntu 8.04.
Thanks.
[-- Attachment #2: Type: text/html, Size: 1296 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2008-11-26 13:18 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <mailman.1212.1227617005.26697.help-gnu-emacs@gnu.org>
2008-11-25 13:27 ` "emacs --daemon" does not load init file Richard Riley
2008-11-25 13:59 ` Richard Riley
2008-11-25 16:08 ` Chengqi(Lars) Song
2008-11-25 19:45 ` Tassilo Horn
2008-11-26 2:42 ` Chengqi(Lars) Song
2008-11-26 7:43 ` Adding toolbar buttons Maindoor
2008-11-26 13:18 ` Maindoor
2008-11-25 22:44 ` "emacs --daemon" does not load init file Peter Dyballa
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).