unofficial mirror of help-gnu-emacs@gnu.org
 help / color / mirror / Atom feed
* emacsclient over ssh
@ 2009-06-23 21:39 Harry Putnam
  0 siblings, 0 replies; 14+ messages in thread
From: Harry Putnam @ 2009-06-23 21:39 UTC (permalink / raw)
  To: help-gnu-emacs

Can I get some guidance on this:

I want to run emacsclient on localhost but connect to emacs-server
running running on remotehost.

is there syntax for the emacsclient -s flag to go thru ssh to the
remote emacs-server

  maybe something like emacsclient -s host:server -c

If this is the wrong way to go maybe someone can tell me how its done. 
So far I've just been doing ssh user@host
Then run emacsclient on the remote... but of course I'm then limited
to a console emacs.

ssh to linux from opensolaris and then running emacs has a number of
problems that need solving for that to be handy.  I guess having to do
with what shell you are in and `stty' setting and other things I haven't
thought of.

At any rate a console emacs arrived at that way is a pain in the but
to use. Its fine for normal file/directory work... but I want to
access an emacs/gnus session running on the remote emacs-server. And I
want the emacsclient to run in X on the localhost.

Both remote and localhost are running X.

The end result I'm after is to be able to access an emacs/gnus session
that is running on a specific host from any of several hosts on the
home lan.

Someway... I want to end up with an emacsclient running in X and
connected to a server on remotehost.





^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: emacsclient over ssh
       [not found] <mailman.1165.1245793203.2239.help-gnu-emacs@gnu.org>
@ 2009-06-23 22:09 ` Richard Riley
  2009-06-23 23:13   ` suvayu ali
       [not found]   ` <mailman.1178.1245818812.2239.help-gnu-emacs@gnu.org>
  2009-06-24  7:49 ` Tim X
                   ` (2 subsequent siblings)
  3 siblings, 2 replies; 14+ messages in thread
From: Richard Riley @ 2009-06-23 22:09 UTC (permalink / raw)
  To: help-gnu-emacs

Harry Putnam <reader@newsguy.com> writes:

> Can I get some guidance on this:
>
> I want to run emacsclient on localhost but connect to emacs-server
> running running on remotehost.
>
> is there syntax for the emacsclient -s flag to go thru ssh to the
> remote emacs-server
>
>   maybe something like emacsclient -s host:server -c
>
> If this is the wrong way to go maybe someone can tell me how its done. 
> So far I've just been doing ssh user@host
> Then run emacsclient on the remote... but of course I'm then limited
> to a console emacs.

Possibly just enable x forwarding? Google will help with that. Probably
something like /etc/ssh/sshd_config and

"X11Forwarding yes"

Then if you have the server running on hermes for example your
command could be I guess:

ssh hermes 'emacsclient -c filename'



>
> ssh to linux from opensolaris and then running emacs has a number of
> problems that need solving for that to be handy.  I guess having to do
> with what shell you are in and `stty' setting and other things I haven't
> thought of.
>
> At any rate a console emacs arrived at that way is a pain in the but
> to use. Its fine for normal file/directory work... but I want to
> access an emacs/gnus session running on the remote emacs-server. And I
> want the emacsclient to run in X on the localhost.
>
> Both remote and localhost are running X.
>
> The end result I'm after is to be able to access an emacs/gnus session
> that is running on a specific host from any of several hosts on the
> home lan.
>
> Someway... I want to end up with an emacsclient running in X and
> connected to a server on remotehost.
>
>
>

-- 


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: emacsclient over ssh
  2009-06-23 22:09 ` emacsclient over ssh Richard Riley
@ 2009-06-23 23:13   ` suvayu ali
       [not found]   ` <mailman.1178.1245818812.2239.help-gnu-emacs@gnu.org>
  1 sibling, 0 replies; 14+ messages in thread
From: suvayu ali @ 2009-06-23 23:13 UTC (permalink / raw)
  To: help-gnu-emacs

2009/6/23 Richard Riley <rileyrgdev@gmail.com>:
> Harry Putnam <reader@newsguy.com> writes:
>
>> Can I get some guidance on this:
>>
>> I want to run emacsclient on localhost but connect to emacs-server
>> running running on remotehost.
>>
>> is there syntax for the emacsclient -s flag to go thru ssh to the
>> remote emacs-server
>>
>>   maybe something like emacsclient -s host:server -c
>>
>> If this is the wrong way to go maybe someone can tell me how its done.
>> So far I've just been doing ssh user@host
>> Then run emacsclient on the remote... but of course I'm then limited
>> to a console emacs.
>
> Possibly just enable x forwarding? Google will help with that. Probably
> something like /etc/ssh/sshd_config and
>
> "X11Forwarding yes"
>
> Then if you have the server running on hermes for example your
> command could be I guess:
>
> ssh hermes 'emacsclient -c filename'
>

use 'ssh -Y' for X forwarding

-- 
Suvayu

Open source is the future. It sets us free.




^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: emacsclient over ssh
       [not found] <mailman.1165.1245793203.2239.help-gnu-emacs@gnu.org>
  2009-06-23 22:09 ` emacsclient over ssh Richard Riley
@ 2009-06-24  7:49 ` Tim X
  2009-06-24  8:32 ` Josef G. Bauer
  2009-06-24 12:13 ` Anselm Helbig
  3 siblings, 0 replies; 14+ messages in thread
From: Tim X @ 2009-06-24  7:49 UTC (permalink / raw)
  To: help-gnu-emacs

Harry Putnam <reader@newsguy.com> writes:

> Can I get some guidance on this:
>
> I want to run emacsclient on localhost but connect to emacs-server
> running running on remotehost.
>
> is there syntax for the emacsclient -s flag to go thru ssh to the
> remote emacs-server
>
>   maybe something like emacsclient -s host:server -c
>
> If this is the wrong way to go maybe someone can tell me how its done. 
> So far I've just been doing ssh user@host
> Then run emacsclient on the remote... but of course I'm then limited
> to a console emacs.
>
> ssh to linux from opensolaris and then running emacs has a number of
> problems that need solving for that to be handy.  I guess having to do
> with what shell you are in and `stty' setting and other things I haven't
> thought of.
>
> At any rate a console emacs arrived at that way is a pain in the but
> to use. Its fine for normal file/directory work... but I want to
> access an emacs/gnus session running on the remote emacs-server. And I
> want the emacsclient to run in X on the localhost.
>
> Both remote and localhost are running X.
>
> The end result I'm after is to be able to access an emacs/gnus session
> that is running on a specific host from any of several hosts on the
> home lan.
>
> Someway... I want to end up with an emacsclient running in X and
> connected to a server on remotehost.


You didn't specify what version of emacs. The emacsclient has changed in
version 23 and I *think* some of those changes were backported to emacs
22. 

At any rate, running emacs 23, I can ssh to my remote system and run
emacsclient so that it pops up a new emacs X frame, so essentially, I
get what you want pretty much out of the box. The only thing I had to
configure was to tell ssh to forward X11 connections to my local host. 

I'm not sure if this X frame functionality is available in emacs 22
client. CVS Emacs 23 is very stable - I've been running it now for ages
and have only had a few minor problems that were resolved
quickly. (and I do mean minor and I do mean a few - less than 5

Tim


-- 
tcross (at) rapttech dot com dot au


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: emacsclient over ssh
       [not found] <mailman.1165.1245793203.2239.help-gnu-emacs@gnu.org>
  2009-06-23 22:09 ` emacsclient over ssh Richard Riley
  2009-06-24  7:49 ` Tim X
@ 2009-06-24  8:32 ` Josef G. Bauer
  2009-06-24 12:13 ` Anselm Helbig
  3 siblings, 0 replies; 14+ messages in thread
From: Josef G. Bauer @ 2009-06-24  8:32 UTC (permalink / raw)
  To: help-gnu-emacs

Hi,

 > I want to run emacsclient on localhost but connect to emacs-server
 > running running on remotehost.

you might want to try 'gnuclient -h SERVER'. Works very well for
me. It's quite a bit tricky to install (for emacs 22), as far as I
remember.

Greetings

Josef


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: emacsclient over ssh
       [not found]   ` <mailman.1178.1245818812.2239.help-gnu-emacs@gnu.org>
@ 2009-06-24 10:40     ` Richard Riley
  0 siblings, 0 replies; 14+ messages in thread
From: Richard Riley @ 2009-06-24 10:40 UTC (permalink / raw)
  To: help-gnu-emacs

suvayu ali <fatkasuvayu+linux@gmail.com> writes:

> 2009/6/23 Richard Riley <rileyrgdev@gmail.com>:
>> Harry Putnam <reader@newsguy.com> writes:
>>
>>> Can I get some guidance on this:
>>>
>>> I want to run emacsclient on localhost but connect to emacs-server
>>> running running on remotehost.
>>>
>>> is there syntax for the emacsclient -s flag to go thru ssh to the
>>> remote emacs-server
>>>
>>>   maybe something like emacsclient -s host:server -c
>>>
>>> If this is the wrong way to go maybe someone can tell me how its done.
>>> So far I've just been doing ssh user@host
>>> Then run emacsclient on the remote... but of course I'm then limited
>>> to a console emacs.
>>
>> Possibly just enable x forwarding? Google will help with that. Probably
>> something like /etc/ssh/sshd_config and
>>
>> "X11Forwarding yes"
>>
>> Then if you have the server running on hermes for example your
>> command could be I guess:
>>
>> ssh hermes 'emacsclient -c filename'
>>
>
> use 'ssh -Y' for X forwarding

-X here if not enabled by default on the server.


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: emacsclient over ssh
       [not found] <mailman.1165.1245793203.2239.help-gnu-emacs@gnu.org>
                   ` (2 preceding siblings ...)
  2009-06-24  8:32 ` Josef G. Bauer
@ 2009-06-24 12:13 ` Anselm Helbig
  2009-06-25  4:47   ` Harry Putnam
  3 siblings, 1 reply; 14+ messages in thread
From: Anselm Helbig @ 2009-06-24 12:13 UTC (permalink / raw)
  To: help-gnu-emacs

Hi!

> At any rate a console emacs arrived at that way is a pain in the but
> to use. Its fine for normal file/directory work... but I want to
> access an emacs/gnus session running on the remote emacs-server. And I
> want the emacsclient to run in X on the localhost.

A console emacs doesn't have to be so bad. 

  - the "backspace invokes help"-issue goes away after "stty erase '^?'"

  - you can get more than 16 colors on the console in xterm or rxvt, see
    http://www.emacswiki.org/emacs/XTermColors

  - xterm-mouse-mode allows you to use your favourite pointing device

I have to admit that you don't get a tool bar and the menu looks a bit
ugly. But then, who needs these, anyway? 8-)

The primary advantage of using emacs in a remote terminal instead of
forwarded via X is speed - forwarding an X client over a WAN might
feel sluggish.

Maybe you should consider using a local emacs and TRAMP to access
your remote files. 

Regards, 

Anselm


-- 
Anselm Helbig 
mailto:anselm.helbig+news2009@googlemail.com


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: emacsclient over ssh
  2009-06-24 12:13 ` Anselm Helbig
@ 2009-06-25  4:47   ` Harry Putnam
  2009-06-25  7:28     ` tomas
       [not found]     ` <mailman.1230.1245914729.2239.help-gnu-emacs@gnu.org>
  0 siblings, 2 replies; 14+ messages in thread
From: Harry Putnam @ 2009-06-25  4:47 UTC (permalink / raw)
  To: help-gnu-emacs

Anselm Helbig <anselm.helbig+news2009@googlemail.com> writes:

> Hi!
>
>> At any rate a console emacs arrived at that way is a pain in the but
>> to use. Its fine for normal file/directory work... but I want to
>> access an emacs/gnus session running on the remote emacs-server. And I
>> want the emacsclient to run in X on the localhost.
>
> A console emacs doesn't have to be so bad. 

From linux local to linux remote... its not bad.  Or over putty.
but when solaris is involved its orders of magnitude worse.

there is much more than the erase issue.

>   - the "backspace invokes help"-issue goes away after "stty erase '^?'"

>   - you can get more than 16 colors on the console in xterm or rxvt, see
>     http://www.emacswiki.org/emacs/XTermColors

The colors would have to be endlessly tweaked to get something close
to what I use in X... I know because I've done it a few times.

>   - xterm-mouse-mode allows you to use your favourite pointing device

There is no mouse in console mode on solaris.

> I have to admit that you don't get a tool bar and the menu looks a bit
> ugly. But then, who needs these, anyway? 8-)

I don't use those even in X.

> The primary advantage of using emacs in a remote terminal instead of
> forwarded via X is speed - forwarding an X client over a WAN might
> feel sluggish.

This is strictly a local home lan...hard wired and  with gigabit NICS.

> Maybe you should consider using a local emacs and TRAMP to access
> your remote files. 

Well, like I mentioned in OP.. I want to be able to tap into a gnus
session running on the remote...You can't do that with tramp, so its
not really an issue of access and editing files... I want to read news
and mail and not have to fight with several things I'm used to having.
M-x work without using Esc.  I don't have to hold down the control
key and hit h to backspace to the left.

Various other aggravations too.

Linux to linux in console mode is fine .. I even prefer it for lots of
things.  But throw Solaris into the mix... and its just more than I
want to dick around with... and don't really want to fuss with everything
to get it to work like I'm used to.

Solaris developers.. have never put much time into the console
mode... its still like it was in the 80s on linux.

I just want to pull that session across in X and everything is hunky
dorey.  No endless fixes involved.

The suggestion about editing sshd_config was all it took.  I'd just
forgotten to do that.. and where etc. 

When I just want to edit files across a real wan... not read News
across a home lan.. I'm good with vi or vim. (ducks for asbestos undies)





^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: emacsclient over ssh
  2009-06-25  4:47   ` Harry Putnam
@ 2009-06-25  7:28     ` tomas
  2009-06-25 11:38       ` Harry Putnam
       [not found]     ` <mailman.1230.1245914729.2239.help-gnu-emacs@gnu.org>
  1 sibling, 1 reply; 14+ messages in thread
From: tomas @ 2009-06-25  7:28 UTC (permalink / raw)
  To: Harry Putnam; +Cc: help-gnu-emacs

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Wed, Jun 24, 2009 at 11:47:19PM -0500, Harry Putnam wrote:

[...]

> Well, like I mentioned in OP.. I want to be able to tap into a gnus
> session running on the remote...You can't do that with tramp [...]

> Various other aggravations too.

Have you thought of tunneling the emacs client <--> server connection
through SSH?

Not tried yet, and I'm not sure whether there is'nt any better way --
(gurus invited to chime-in ;-) but that is a rough sketch of how I would
proceed:

  (1) Start Emacs server on your server machine, tell it to listen on TCP:
        emacs --daemon --eval '(setq server-use-tcp t)'
      (of course, typically you wouldn't use --eval in the command line,
      but rather put (setq ...) into some suitable startup file)
      Now the Emacs daemon is running and accepting connections via tcp.
      Maybe you can access it directly from your local network. If
      security is enough, you might skip step (3).

  (2) Transfer the file ~/.emacs.d/server/server to your client machine.
      It contains (among other things) a cookie which the client has to
      present to the server to appease the dogs at its entrance.

  (3) Among those "other things" there is a server address and port
      number. With some shell magic, create a shell command along the
      lines of 
        ssh -Llocalhost:<localport>:localhost:<emacsport> <youruser@yourserver>
      where you choose <localport> and extract <emacsport> from the file
      in (2) above
      Note that this step is only strictly necessary if you don't want
      to have your Emacs server listening in your home net (you'll have
      to dissuade it from doing so by some other means, though).

  (4) Give your client in the client machine the server cookie from (2).
      If you have done (3) and if <localport> and <emacsport> differ,
      you might have to edit the cookie file:
        emacsclient --server-file <the cookie from (2), edited if necessary>

Of course, if you are more fluent in elisp, you might substitute the
shell magic above with sufficient elisp magic. It's just more magic.

  (5) Let us know whether that works ;-)

Regards
- -- tomás

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)

iD8DBQFKQycYBcgs9XrR2kYRAiEzAJ0Rk/Vj0hiR15Qw1/dp49YUBFIb+QCffpcc
rbEd283dkeQc2B3rJ0jdfRM=
=Gl3r
-----END PGP SIGNATURE-----




^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: emacsclient over ssh
       [not found]     ` <mailman.1230.1245914729.2239.help-gnu-emacs@gnu.org>
@ 2009-06-25 11:13       ` Richard Riley
  2009-06-25 12:20         ` tomas
       [not found]         ` <mailman.1238.1245932253.2239.help-gnu-emacs@gnu.org>
  0 siblings, 2 replies; 14+ messages in thread
From: Richard Riley @ 2009-06-25 11:13 UTC (permalink / raw)
  To: help-gnu-emacs

tomas@tuxteam.de writes:

> On Wed, Jun 24, 2009 at 11:47:19PM -0500, Harry Putnam wrote:
>
> [...]
>
>> Well, like I mentioned in OP.. I want to be able to tap into a gnus
>> session running on the remote...You can't do that with tramp [...]
>
>> Various other aggravations too.
>
> Have you thought of tunneling the emacs client <--> server connection
> through SSH?
>
> Not tried yet, and I'm not sure whether there is'nt any better way --
> (gurus invited to chime-in ;-) but that is a rough sketch of how I would
> proceed:
>
>   (1) Start Emacs server on your server machine, tell it to listen on TCP:
>         emacs --daemon --eval '(setq server-use-tcp t)'
>       (of course, typically you wouldn't use --eval in the command line,
>       but rather put (setq ...) into some suitable startup file)
>       Now the Emacs daemon is running and accepting connections via tcp.
>       Maybe you can access it directly from your local network. If
>       security is enough, you might skip step (3).
>
>   (2) Transfer the file ~/.emacs.d/server/server to your client machine.
>       It contains (among other things) a cookie which the client has to
>       present to the server to appease the dogs at its entrance.
>
>   (3) Among those "other things" there is a server address and port
>       number. With some shell magic, create a shell command along the
>       lines of
>         ssh -Llocalhost:<localport>:localhost:<emacsport> <youruser@yourserver>
>       where you choose <localport> and extract <emacsport> from the file
>       in (2) above
>       Note that this step is only strictly necessary if you don't want
>       to have your Emacs server listening in your home net (you'll have
>       to dissuade it from doing so by some other means, though).
>
>   (4) Give your client in the client machine the server cookie from (2).
>       If you have done (3) and if <localport> and <emacsport> differ,
>       you might have to edit the cookie file:
>         emacsclient --server-file <the cookie from (2), edited if necessary>
>
> Of course, if you are more fluent in elisp, you might substitute the
> shell magic above with sufficient elisp magic. It's just more magic.
>
>   (5) Let us know whether that works ;-)
>
> Regards
> -- tomás
>
>

What does all that achieve that is different from connecting using
emacsclient over standard ssh (with known_host/key allowing connection)
and x forwarding? 


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: emacsclient over ssh
  2009-06-25  7:28     ` tomas
@ 2009-06-25 11:38       ` Harry Putnam
  0 siblings, 0 replies; 14+ messages in thread
From: Harry Putnam @ 2009-06-25 11:38 UTC (permalink / raw)
  To: help-gnu-emacs

tomas@tuxteam.de writes:

> On Wed, Jun 24, 2009 at 11:47:19PM -0500, Harry Putnam wrote:
>
> [...]
>
>> Well, like I mentioned in OP.. I want to be able to tap into a gnus
>> session running on the remote...You can't do that with tramp [...]
>
>> Various other aggravations too.
>
> Have you thought of tunneling the emacs client <--> server connection
> through SSH?
>
> Not tried yet, and I'm not sure whether there is'nt any better way --
> (gurus invited to chime-in ;-) but that is a rough sketch of how I would
> proceed:
>
>   (1) Start Emacs server on your server machine, tell it to listen on TCP:
>         emacs --daemon --eval '(setq server-use-tcp t)'
>       (of course, typically you wouldn't use --eval in the command line,
>       but rather put (setq ...) into some suitable startup file)
>       Now the Emacs daemon is running and accepting connections via tcp.
>       Maybe you can access it directly from your local network. If
>       security is enough, you might skip step (3).
>
>   (2) Transfer the file ~/.emacs.d/server/server to your client machine.
>       It contains (among other things) a cookie which the client has to
>       present to the server to appease the dogs at its entrance.
>
>   (3) Among those "other things" there is a server address and port
>       number. With some shell magic, create a shell command along the
>       lines of 
>         ssh -Llocalhost:<localport>:localhost:<emacsport> <youruser@yourserver>
>       where you choose <localport> and extract <emacsport> from the file
>       in (2) above
>       Note that this step is only strictly necessary if you don't want
>       to have your Emacs server listening in your home net (you'll have
>       to dissuade it from doing so by some other means, though).
>
>   (4) Give your client in the client machine the server cookie from (2).
>       If you have done (3) and if <localport> and <emacsport> differ,
>       you might have to edit the cookie file:
>         emacsclient --server-file <the cookie from (2), edited if necessary>
>
> Of course, if you are more fluent in elisp, you might substitute the
> shell magic above with sufficient elisp magic. It's just more magic.
>
>   (5) Let us know whether that works ;-)

Ahhh no... I think I'll pass.  A simple edit in /etc/sshd_config was
all I needed.





^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: emacsclient over ssh
  2009-06-25 11:13       ` Richard Riley
@ 2009-06-25 12:20         ` tomas
       [not found]         ` <mailman.1238.1245932253.2239.help-gnu-emacs@gnu.org>
  1 sibling, 0 replies; 14+ messages in thread
From: tomas @ 2009-06-25 12:20 UTC (permalink / raw)
  To: Richard Riley; +Cc: help-gnu-emacs

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Thu, Jun 25, 2009 at 01:13:11PM +0200, Richard Riley wrote:
> tomas@tuxteam.de writes:

[...]

> What does all that achieve that is different from connecting using
> emacsclient over standard ssh (with known_host/key allowing connection)
> and x forwarding? 

Following my sketch, you don't forward the X connection, but the emacs
client <--> server connection. With X forwarding, the Emacs client
(resp. the Emacs process) runs on the "server".

What prompted me to sketch this was the OP's requirement to connect to a
running Gnus on the server. There I see the two alternatives mentioned above.

No idea whether this buys you anything. It might be faster over a slow
link.

Regards
- -- tomás
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)

iD8DBQFKQ2uNBcgs9XrR2kYRAvKhAJ9IVFwkN6t5eXsjuI6icqfOMNMCQQCeMrIK
9cbZly1iTHtJXNRRtfLUiMA=
=dZWT
-----END PGP SIGNATURE-----




^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: emacsclient over ssh
       [not found]         ` <mailman.1238.1245932253.2239.help-gnu-emacs@gnu.org>
@ 2009-06-25 12:47           ` Richard Riley
  2009-06-25 12:49             ` Richard Riley
  0 siblings, 1 reply; 14+ messages in thread
From: Richard Riley @ 2009-06-25 12:47 UTC (permalink / raw)
  To: help-gnu-emacs

tomas@tuxteam.de writes:

> On Thu, Jun 25, 2009 at 01:13:11PM +0200, Richard Riley wrote:
>> tomas@tuxteam.de writes:
>
> [...]
>
>> What does all that achieve that is different from connecting using
>> emacsclient over standard ssh (with known_host/key allowing connection)
>> and x forwarding?
>
> Following my sketch, you don't forward the X connection, but the emacs
> client <--> server connection. With X forwarding, the Emacs client
> (resp. the Emacs process) runs on the "server".

Which is what you want. Since x forwarding is optimised for transfer I
would have thought?

>
> What prompted me to sketch this was the OP's requirement to connect to a
> running Gnus on the server. There I see the two alternatives mentioned above.
>
> No idea whether this buys you anything. It might be faster over a slow
> link.
>
> Regards
> -- tomás
>


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: emacsclient over ssh
  2009-06-25 12:47           ` Richard Riley
@ 2009-06-25 12:49             ` Richard Riley
  0 siblings, 0 replies; 14+ messages in thread
From: Richard Riley @ 2009-06-25 12:49 UTC (permalink / raw)
  To: help-gnu-emacs

Richard Riley <rileyrgdev@gmail.com> writes:

> tomas@tuxteam.de writes:
>
>> On Thu, Jun 25, 2009 at 01:13:11PM +0200, Richard Riley wrote:
>>> tomas@tuxteam.de writes:
>>
>> [...]
>>
>>> What does all that achieve that is different from connecting using
>>> emacsclient over standard ssh (with known_host/key allowing connection)
>>> and x forwarding?
>>
>> Following my sketch, you don't forward the X connection, but the emacs
>> client <--> server connection. With X forwarding, the Emacs client
>> (resp. the Emacs process) runs on the "server".
>
> Which is what you want. Since x forwarding is optimised for transfer I
> would have thought?

Ignore that. I see what you mean now.

I dont fully understand the differences, but I see where you are going!

>
>>
>> What prompted me to sketch this was the OP's requirement to connect to a
>> running Gnus on the server. There I see the two alternatives mentioned above.
>>
>> No idea whether this buys you anything. It might be faster over a slow
>> link.
>>
>> Regards
>> -- tomás
>>

-- 


^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2009-06-25 12:49 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <mailman.1165.1245793203.2239.help-gnu-emacs@gnu.org>
2009-06-23 22:09 ` emacsclient over ssh Richard Riley
2009-06-23 23:13   ` suvayu ali
     [not found]   ` <mailman.1178.1245818812.2239.help-gnu-emacs@gnu.org>
2009-06-24 10:40     ` Richard Riley
2009-06-24  7:49 ` Tim X
2009-06-24  8:32 ` Josef G. Bauer
2009-06-24 12:13 ` Anselm Helbig
2009-06-25  4:47   ` Harry Putnam
2009-06-25  7:28     ` tomas
2009-06-25 11:38       ` Harry Putnam
     [not found]     ` <mailman.1230.1245914729.2239.help-gnu-emacs@gnu.org>
2009-06-25 11:13       ` Richard Riley
2009-06-25 12:20         ` tomas
     [not found]         ` <mailman.1238.1245932253.2239.help-gnu-emacs@gnu.org>
2009-06-25 12:47           ` Richard Riley
2009-06-25 12:49             ` Richard Riley
2009-06-23 21:39 Harry Putnam

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).