* Help setting up POP3 email (rmail) @ 2016-02-23 19:21 cptvlaze 2016-02-23 22:41 ` Emanuel Berg 2016-02-24 0:41 ` Robert Thorpe 0 siblings, 2 replies; 28+ messages in thread From: cptvlaze @ 2016-02-23 19:21 UTC (permalink / raw) To: help-gnu-emacs Good afternoon. I've started using emacs today, so I'm a total newbie at this time. I want to read my GMX email from emacs, using POP3 and rmail, but I just don't know where to start. I've read lots of wikis and manuals and I'm completely lost. Could somebody throw a bit of light over this? Thank you. ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-23 19:21 Help setting up POP3 email (rmail) cptvlaze @ 2016-02-23 22:41 ` Emanuel Berg 2016-02-24 0:41 ` Robert Thorpe 1 sibling, 0 replies; 28+ messages in thread From: Emanuel Berg @ 2016-02-23 22:41 UTC (permalink / raw) To: help-gnu-emacs <cptvlaze@tutamail.com> writes: > I've started using emacs today, so I'm a total > newbie at this time. I want to read my GMX email > from emacs, using POP3 and rmail, but I just don't > know where to start. I've read lots of wikis and > manuals and I'm completely lost. Could somebody > throw a bit of light over this? Thank you. I'd recommend Gnus instead of Rmail for reasons of technology but also because you'll come across more people using Gnus so for a beginner it will be easier to get help. Here is a good tutorial: https://www.emacswiki.org/emacs/GnusTutorial You need to have your GMX data ready. Then just write the Elisp forms exactly as in the tutorial but insert your account data - e.g., (setq mail-sources '((pop :server "pop.provider.org" :user "you" :password "secret"))) and a few (not many) others which are also straightforward. If you don't get it to work ask again and include your configuration file and it won't take us long, God willing. -- underground experts united http://user.it.uu.se/~embe8573 ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-23 19:21 Help setting up POP3 email (rmail) cptvlaze 2016-02-23 22:41 ` Emanuel Berg @ 2016-02-24 0:41 ` Robert Thorpe 2016-02-24 2:50 ` Nick Dokos 2016-02-24 14:38 ` cptvlaze 1 sibling, 2 replies; 28+ messages in thread From: Robert Thorpe @ 2016-02-24 0:41 UTC (permalink / raw) To: cptvlaze; +Cc: help-gnu-emacs <cptvlaze@tutamail.com> writes: > Good afternoon. I've started using emacs today, so I'm a total newbie > at this time. I want to read my GMX email from emacs, using POP3 and > rmail, but I just don't know where to start. I've read lots of wikis > and manuals and I'm completely lost. Could somebody throw a bit of > light over this? Thank you. There are two parts to this. Firstly, there's setting up outgoing mail. That uses the part of Emacs called "Message" (which is the same for GNUs and Rmail). The second step is to setup Rmail for receiving mail. You need to find the names of the servers to communicate with. You need the SMTP server for outgoing mail and the POP3 server for incoming mail. If you're already using a mail program you can find that info in it's settings. Your init file maybe init.el or .emacs. Either way, put the following into it: ;; Firstly setup SMTP. (setq send-mail-function 'smtpmail-send-it) smtpmail-smtp-server "your_smtp_server.com" smtpmail-smtp-service 587 user-mail-address "your_email_address@domain.com") ;; The line below puts sent items into an mbox file. (setq mail-default-headers "FCC: ~/Mail/Sent") ;; This puts my name correctly in email To/From lines. (setq user-full-name "Your Name") ;; Setup Rmail (setq rmail-primary-inbox-list (cons (concat "pop3://" "your_username" "your_password" "@your_pop3_server.com") nil)) I only use the "concat" above so I can separate out the various elements. If you omit the password then Emacs will ask you the first time you recieve mail. Finally, you can setup an ".authinfo" file. This is for sending mail with Message-mode. It avoids entering the password. Create a file called .authinfo in your ~/ directory. It only needs to contain one line: "machine your_smtp_server.com login your_username port 587 password your_password" Many ISP prefer you to use port 587 for outgoing emails rather than port 25, which was the traditional port. That's why I used "587" above in .authinfo and smtpmail-smtp-service. If your ISP is a traditionalist and prefers 25 then replace those numbers with 25. You can also setup encryption, see the manuals to Message and Rmail. Evaluate the lines below with C-x C-e. (info "(message) Top") (info "(emacs) Rmail"). If you have a username with a "@" symbol in it that will activate a bug in Rmail. I have a solution for that if it's a problem. BR, Robert Thorpe ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-24 0:41 ` Robert Thorpe @ 2016-02-24 2:50 ` Nick Dokos 2016-02-24 3:11 ` Emanuel Berg 2016-02-24 14:38 ` cptvlaze 1 sibling, 1 reply; 28+ messages in thread From: Nick Dokos @ 2016-02-24 2:50 UTC (permalink / raw) To: help-gnu-emacs Robert Thorpe <rt@robertthorpeconsulting.com> writes: > ... > Many ISP prefer you to use port 587 for outgoing emails rather than port > 25, which was the traditional port. That's why I used "587" above in > .authinfo and smtpmail-smtp-service. If your ISP is a traditionalist > and prefers 25 then replace those numbers with 25. > And then there's Verizon which uses 465. -- Nick ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-24 2:50 ` Nick Dokos @ 2016-02-24 3:11 ` Emanuel Berg 2016-02-24 16:41 ` Nick Dokos 0 siblings, 1 reply; 28+ messages in thread From: Emanuel Berg @ 2016-02-24 3:11 UTC (permalink / raw) To: help-gnu-emacs Nick Dokos <ndokos@gmail.com> writes: >> Many ISP prefer you to use port 587 for outgoing >> emails rather than port 25, which was the >> traditional port. That's why I used "587" above in >> .authinfo and smtpmail-smtp-service. If your ISP is >> a traditionalist and prefers 25 then replace those >> numbers with 25. > > And then there's Verizon which uses 465. ... why do they do that? Anyway, here, allow me to hit the big drum for the favorite theme "code as an interface". As you see below, changing port or any of the servers or just about anything is super easy and done in one spot and stop. Then evaluate and all set. I mentioned I do Gnus, but depending on how generalized the settings are chances are most (or some) will be put to work by the other Emacs mail clients as well, and actually seemingly unrelated Emacs components as well. Why not? They are there. Some people say Emacs is inconsistent. But not entirely so! :) (let*((username "embe8573") (mail-name username) (domain "uu.se") (local-domain (format "student.%s" domain)) (pop-server (format "pop.%s" domain)) (smtp-server (format "smtp.%s" domain)) (smtp-port 25) ) (setq smtpmail-local-domain local-domain) (setq smtpmail-smtp-service smtp-port) (setq smtpmail-smtp-server smtp-server) (setq user-full-name "Emanuel Berg") (setq user-mail-address (format "%s@%s" mail-name local-domain)) (setq mail-sources `((pop :server ,pop-server :user ,username :password ,*mail-password*) ))) PS. Observe the secret password which is not hidden but actually a *global-variable*. This allows you never to enter the password which sure is a relief, especially if you are used to that from the autologin of the ttys. But actually I might as well put it there in cleartext as you already read all my mails :)) -- underground experts united http://user.it.uu.se/~embe8573 ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-24 3:11 ` Emanuel Berg @ 2016-02-24 16:41 ` Nick Dokos 0 siblings, 0 replies; 28+ messages in thread From: Nick Dokos @ 2016-02-24 16:41 UTC (permalink / raw) To: help-gnu-emacs Emanuel Berg <embe8573@student.uu.se> writes: >> And then there's Verizon which uses 465. > > ... why do they do that? > $DEITY only knows. They used to use 587 but when they disallowed port 25 and went to 465, 587 went away as well. I have to play stunnel games in order to have postfix work with 465. But it does not affect the vast majority of their customers much: they set up outlook and forget it. Wikipedia has some information https://en.wikipedia.org/wiki/SMTPS but my suspicion is that they are doing it for "efficiency" reasons: they don't have to worry about negotiating a TLS connection, the way that they would have to with 587. -- Nick ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-24 0:41 ` Robert Thorpe 2016-02-24 2:50 ` Nick Dokos @ 2016-02-24 14:38 ` cptvlaze 2016-02-24 14:46 ` tomas ` (2 more replies) 1 sibling, 3 replies; 28+ messages in thread From: cptvlaze @ 2016-02-24 14:38 UTC (permalink / raw) To: Robert Thorpe; +Cc: help-gnu-emacs Thanks for the quick response. Is wondering if it was strictly necessary to enter my password inside my code, wouldn't it be a major security issue? I also have a problem with my init file, as emacs can't detect it. I have created one at ~/.emacs.d/init.el, but this folder is protected (only accessible via su), which forces me to use emacs under sudo. Is there any way to solve these problems? Thanks again. 24. Feb 2016 01:41 por rt@robertthorpeconsulting.com: > <> cptvlaze@tutamail.com> > writes: > >> Good afternoon. I've started using emacs today, so I'm a total newbie >> at this time. I want to read my GMX email from emacs, using POP3 and >> rmail, but I just don't know where to start. I've read lots of wikis >> and manuals and I'm completely lost. Could somebody throw a bit of >> light over this? Thank you. > > There are two parts to this. Firstly, there's setting up outgoing > mail. That uses the part of Emacs called "Message" (which is the same > for GNUs and Rmail). The second step is to setup Rmail for receiving > mail. > > You need to find the names of the servers to communicate with. You need > the SMTP server for outgoing mail and the POP3 server for incoming > mail. If you're already using a mail program you can find that info in > it's settings. > > Your init file maybe init.el or .emacs. Either way, put the following > into it: > > ;; Firstly setup SMTP. > (setq send-mail-function 'smtpmail-send-it) > smtpmail-smtp-server "your_smtp_server.com" > smtpmail-smtp-service 587 > user-mail-address "> your_email_address@domain.com> ") > ;; The line below puts sent items into an mbox file. > (setq mail-default-headers "FCC: ~/Mail/Sent") > ;; This puts my name correctly in email To/From lines. > (setq user-full-name "Your Name") > > ;; Setup Rmail > (setq rmail-primary-inbox-list > (cons (concat "pop3://" > "your_username" > "your_password" > "@your_pop3_server.com") nil)) > > I only use the "concat" above so I can separate out the various > elements. If you omit the password then Emacs will ask you the first > time you recieve mail. > > Finally, you can setup an ".authinfo" file. This is for sending mail > with Message-mode. It avoids entering the password. > > Create a file called .authinfo in your ~/ directory. It only needs to > contain one line: > "machine your_smtp_server.com login your_username port 587 password > your_password" > > Many ISP prefer you to use port 587 for outgoing emails rather than port > 25, which was the traditional port. That's why I used "587" above in > .authinfo and smtpmail-smtp-service. If your ISP is a traditionalist > and prefers 25 then replace those numbers with 25. > > You can also setup encryption, see the manuals to Message and Rmail. > Evaluate the lines below with C-x C-e. > (info "(message) Top") > (info "(emacs) Rmail"). > > If you have a username with a "@" symbol in it that will activate a bug > in Rmail. I have a solution for that if it's a problem. > > BR, > Robert Thorpe ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-24 14:38 ` cptvlaze @ 2016-02-24 14:46 ` tomas 2016-02-24 15:34 ` cptvlaze 2016-02-24 20:28 ` Robert Thorpe 2016-02-24 23:47 ` Emanuel Berg 2 siblings, 1 reply; 28+ messages in thread From: tomas @ 2016-02-24 14:46 UTC (permalink / raw) To: help-gnu-emacs -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Wed, Feb 24, 2016 at 02:38:41PM +0000, cptvlaze@tutamail.com wrote: [...] > I also have a problem with my init file, as emacs can't detect it. I have > created one at ~/.emacs.d/init.el, but this folder is protected (only > accessible via su) This is a very strange thing to do. Why should something in your home be ony accessible by root? (why should it belong to root in the first place?). I mean: readable only by owner makes sense, but the owner should be *you*, I think. Regards - -- tomás -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iEYEARECAAYFAlbNwl8ACgkQBcgs9XrR2kYb+QCfZPoGx+S1cIGBwF4HxjMd1sIy aX4An1ZRgpbwg10FfNxMlqtYImAyPpzL =9ox7 -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-24 14:46 ` tomas @ 2016-02-24 15:34 ` cptvlaze 2016-02-24 20:16 ` Robert Thorpe 0 siblings, 1 reply; 28+ messages in thread From: cptvlaze @ 2016-02-24 15:34 UTC (permalink / raw) To: tomas; +Cc: help-gnu-emacs I have no idea, but emacs made it like this. ~/.emacs.d is owned by root, which can do whatever he pleases with it. No one out of him can do anything with the folder. I thought it was a normal configuration made by the editor itself. I can chown it, though. Could you give me the proper permissions that I have to give it? (Intended for my personal laptop, which could be eventually used by other people, etc.) 24. Feb 2016 15:46 por tomas@tuxteam.de: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > On Wed, Feb 24, 2016 at 02:38:41PM +0000, > cptvlaze@tutamail.com> wrote: > > [...] > >> I also have a problem with my init file, as emacs can't detect it. I have >> created one at ~/.emacs.d/init.el, but this folder is protected (only >> accessible via su) > > This is a very strange thing to do. Why should something in your home > be ony accessible by root? (why should it belong to root in the first > place?). > > I mean: readable only by owner makes sense, but the owner should be > *you*, I think. > > Regards > - -- tomás > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.12 (GNU/Linux) > > iEYEARECAAYFAlbNwl8ACgkQBcgs9XrR2kYb+QCfZPoGx+S1cIGBwF4HxjMd1sIy > aX4An1ZRgpbwg10FfNxMlqtYImAyPpzL > =9ox7 > -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-24 15:34 ` cptvlaze @ 2016-02-24 20:16 ` Robert Thorpe 0 siblings, 0 replies; 28+ messages in thread From: Robert Thorpe @ 2016-02-24 20:16 UTC (permalink / raw) To: cptvlaze; +Cc: help-gnu-emacs <cptvlaze@tutamail.com> writes: > I have no idea, but emacs made it like this. ~/.emacs.d is owned by > root, which can do whatever he pleases with it. When you first started Emacs did you do it using sudo from your own home directory? I maybe that could cause .emacs.d to be owned by root. Anyway, I suggest the following, which is probably simpler than mucking about with chown: * In your normal user account copy the stuff you want out of .emacs.d. You probably only want init.el if you've just started. * Sudo and delete .emacs.d. * Recreate .emacs.d and copy init.el into it. * Run Emacs and it should work from your normal account. BR, Robert Thorpe > No one out of him can > do anything with the folder. I thought it was a normal configuration > made by the editor itself. I can chown it, though. Could you give me > the proper permissions that > I have to give it? (Intended for my personal laptop, which could be > eventually used by other people, etc.) > > 24. Feb 2016 15:46 por tomas@tuxteam.de: > > >> -----BEGIN PGP SIGNED MESSAGE----- >> Hash: SHA1 >> >> On Wed, Feb 24, 2016 at 02:38:41PM +0000, > cptvlaze@tutamail.com> wrote: >> >> [...] >> >>> I also have a problem with my init file, as emacs can't detect it. I have >>> created one at ~/.emacs.d/init.el, but this folder is protected (only >>> accessible via su) >> >> This is a very strange thing to do. Why should something in your home >> be ony accessible by root? (why should it belong to root in the first >> place?). >> >> I mean: readable only by owner makes sense, but the owner should be >> *you*, I think. >> >> Regards >> - -- tomás >> -----BEGIN PGP SIGNATURE----- >> Version: GnuPG v1.4.12 (GNU/Linux) >> >> iEYEARECAAYFAlbNwl8ACgkQBcgs9XrR2kYb+QCfZPoGx+S1cIGBwF4HxjMd1sIy >> aX4An1ZRgpbwg10FfNxMlqtYImAyPpzL >> =9ox7 >> -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-24 14:38 ` cptvlaze 2016-02-24 14:46 ` tomas @ 2016-02-24 20:28 ` Robert Thorpe 2016-02-24 23:56 ` Emanuel Berg 2016-02-24 23:47 ` Emanuel Berg 2 siblings, 1 reply; 28+ messages in thread From: Robert Thorpe @ 2016-02-24 20:28 UTC (permalink / raw) To: cptvlaze; +Cc: help-gnu-emacs <cptvlaze@tutamail.com> writes: > Thanks for the quick response. Is wondering if it was strictly necessary to > enter my password inside my code, wouldn't it be a major security > issue? It can be a security issue, though most graphical mail clients store it in a config file somewhere, which is just as bad. As I said, if it's a problem then don't mention passwords anywhere. If I remember correctly, if you don't have an authinfo file then Message-mode will ask you the password the first time you send an email. You can also make an authinfo.gpg file which is the encrypted version of authinfo, you can read about that on the web. For rmail just don't include the password: (setq rmail-primary-inbox-list (cons (concat "pop3://" "your_username" "@your_pop3_server.com") nil)) Rmail will prompt you for the password when you receive mail. BR, Robert Thorpe > I also have a problem with my init file, as emacs can't detect it. I have > created one at ~/.emacs.d/init.el, but this folder is protected (only > accessible via su), which forces me to use emacs under sudo. Is there > any way to solve these problems? Thanks again. > > 24. Feb 2016 01:41 por rt@robertthorpeconsulting.com: > > >> <> cptvlaze@tutamail.com> > writes: >> >>> Good afternoon. I've started using emacs today, so I'm a total newbie >>> at this time. I want to read my GMX email from emacs, using POP3 and >>> rmail, but I just don't know where to start. I've read lots of wikis >>> and manuals and I'm completely lost. Could somebody throw a bit of >>> light over this? Thank you. >> >> There are two parts to this. Firstly, there's setting up outgoing >> mail. That uses the part of Emacs called "Message" (which is the same >> for GNUs and Rmail). The second step is to setup Rmail for receiving >> mail. >> >> You need to find the names of the servers to communicate with. You need >> the SMTP server for outgoing mail and the POP3 server for incoming >> mail. If you're already using a mail program you can find that info in >> it's settings. >> >> Your init file maybe init.el or .emacs. Either way, put the following >> into it: >> >> ;; Firstly setup SMTP. >> (setq send-mail-function 'smtpmail-send-it) >> smtpmail-smtp-server "your_smtp_server.com" >> smtpmail-smtp-service 587 >> user-mail-address "> your_email_address@domain.com> ") >> ;; The line below puts sent items into an mbox file. >> (setq mail-default-headers "FCC: ~/Mail/Sent") >> ;; This puts my name correctly in email To/From lines. >> (setq user-full-name "Your Name") >> >> ;; Setup Rmail >> (setq rmail-primary-inbox-list >> (cons (concat "pop3://" >> "your_username" >> "your_password" >> "@your_pop3_server.com") nil)) >> >> I only use the "concat" above so I can separate out the various >> elements. If you omit the password then Emacs will ask you the first >> time you recieve mail. >> >> Finally, you can setup an ".authinfo" file. This is for sending mail >> with Message-mode. It avoids entering the password. >> >> Create a file called .authinfo in your ~/ directory. It only needs to >> contain one line: >> "machine your_smtp_server.com login your_username port 587 password >> your_password" >> >> Many ISP prefer you to use port 587 for outgoing emails rather than port >> 25, which was the traditional port. That's why I used "587" above in >> .authinfo and smtpmail-smtp-service. If your ISP is a traditionalist >> and prefers 25 then replace those numbers with 25. >> >> You can also setup encryption, see the manuals to Message and Rmail. >> Evaluate the lines below with C-x C-e. >> (info "(message) Top") >> (info "(emacs) Rmail"). >> >> If you have a username with a "@" symbol in it that will activate a bug >> in Rmail. I have a solution for that if it's a problem. >> >> BR, >> Robert Thorpe ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-24 20:28 ` Robert Thorpe @ 2016-02-24 23:56 ` Emanuel Berg 0 siblings, 0 replies; 28+ messages in thread From: Emanuel Berg @ 2016-02-24 23:56 UTC (permalink / raw) To: help-gnu-emacs Robert Thorpe <rt@robertthorpeconsulting.com> writes: >> Thanks for the quick response. Is wondering if it >> was strictly necessary to enter my password inside >> my code, wouldn't it be a major security issue? > > It can be a security issue, though most graphical > mail clients store it in a config file somewhere, > which is just as bad. "Security thru obscurity" isn't as secure as giving authentication each time from your brain and fingertips only. Question is, just how much more insecure is it? If you have to give your password many times a day this is a frustration and time waste trade-off with security. Unless you enjoy typing the password, of course :) Also, consider people can wire your keyboard or shoulder-surf as you type. Especially if you do it repeatedly in a public place, it is even more shaky. All in all, I consider this cloak-and-dagger game exaggerated. It is the self-image that one is so important and everyone else so corrupted (and brilliant) they'd do anything to get ones data. I have lived many lives (just like Mdm. Kollontai) but I have yet to see this scenario realize. -- underground experts united http://user.it.uu.se/~embe8573 ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-24 14:38 ` cptvlaze 2016-02-24 14:46 ` tomas 2016-02-24 20:28 ` Robert Thorpe @ 2016-02-24 23:47 ` Emanuel Berg 2016-02-26 18:46 ` cptvlaze 2 siblings, 1 reply; 28+ messages in thread From: Emanuel Berg @ 2016-02-24 23:47 UTC (permalink / raw) To: help-gnu-emacs <cptvlaze@tutamail.com> writes: > Thanks for the quick response. Hint: use citing (quoting) just like we do and it'll be even faster and more pleasant to answer your posts. And this will be even easier for you if you get Rmail or Gnus working, tho what I remember even Hotmail in the 90s did that... > Is wondering if it was strictly necessary to enter > my password inside my code, wouldn't it be a major > security issue? *Laughter* No, that is entirely optional! I disabled the login password to my computer many years ago and a couple of years later did the same with Internet and mail login. I actually don't know how big a security issue it is. Certainly if the computer gets stolen, but if that happens, it would be such a waste if the thief wasn't able to use all my awesome tools :) As for the mails, I already have them on the disk so with the login password disabled I don't see the mail ditto doing much good save for perhaps the thief being able to spoof my accounts. But this is all with the assumption the computer gets stolen physically by a computer literate thief. This is so unlikely I don't worry one bit. From a "remote" point of view, it would be interesting to know how much an issue it is and how it could be exploited. Does it matter that much if you enter the data from your fingertips or if a program does it for you? One way of not having to have it in text is to have a function that calculates it each time. It would be virtually the same only one more obstacle. > I also have a problem with my init file, as emacs > can't detect it. I have created one at > ~/.emacs.d/init.el, but this folder is protected > (only accessible via su), which forces me to use > emacs under sudo. Is there any way to solve > these problems? It shouldn't be like that. How did you install Emacs? What Unix/Linux distro are you on? Reinstallation is an option. -- underground experts united http://user.it.uu.se/~embe8573 ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-24 23:47 ` Emanuel Berg @ 2016-02-26 18:46 ` cptvlaze 2016-02-26 19:57 ` Emanuel Berg 0 siblings, 1 reply; 28+ messages in thread From: cptvlaze @ 2016-02-26 18:46 UTC (permalink / raw) To: Emanuel Berg; +Cc: help-gnu-emacs Following your code, emacs will return me the following error: At startup: 'load-with-code-conversion: Symbol's value as variable is void: smtpmail-smtp-server' ...and trying to send my email, after asking me for my server username, email and password... 'smtpmail-send-it: Sending failed: 550-Requested action not taken: mailbox unavailable 550 Sender address is not allowed.' Any clue? 25. Feb 2016 00:47 by embe8573@student.uu.se: > <> cptvlaze@tutamail.com> > writes: > >> Thanks for the quick response. > > Hint: use citing (quoting) just like we do and it'll > be even faster and more pleasant to answer your posts. > And this will be even easier for you if you get Rmail > or Gnus working, tho what I remember even Hotmail in > the 90s did that... > >> Is wondering if it was strictly necessary to enter >> my password inside my code, wouldn't it be a major >> security issue? > > *Laughter* > > No, that is entirely optional! > > I disabled the login password to my computer many > years ago and a couple of years later did the same > with Internet and mail login. > > I actually don't know how big a security issue it is. > Certainly if the computer gets stolen, but if that > happens, it would be such a waste if the thief wasn't > able to use all my awesome tools :) > > As for the mails, I already have them on the disk so > with the login password disabled I don't see the mail > ditto doing much good save for perhaps the thief being > able to spoof my accounts. > > But this is all with the assumption the computer gets > stolen physically by a computer literate thief. > This is so unlikely I don't worry one bit. > > From a "remote" point of view, it would be interesting > to know how much an issue it is and how it could be > exploited. Does it matter that much if you enter the > data from your fingertips or if a program does it > for you? > > One way of not having to have it in text is to have > a function that calculates it each time. It would be > virtually the same only one more obstacle. > >> I also have a problem with my init file, as emacs >> can't detect it. I have created one at >> ~/.emacs.d/init.el, but this folder is protected >> (only accessible via su), which forces me to use >> emacs under sudo. Is there any way to solve >> these problems? > > It shouldn't be like that. How did you install Emacs? > What Unix/Linux distro are you on? Reinstallation is > an option. > > -- > underground experts united > http://user.it.uu.se/~embe8573 ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-26 18:46 ` cptvlaze @ 2016-02-26 19:57 ` Emanuel Berg 2016-02-26 23:56 ` cptvlaze 0 siblings, 1 reply; 28+ messages in thread From: Emanuel Berg @ 2016-02-26 19:57 UTC (permalink / raw) To: help-gnu-emacs <cptvlaze@tutamail.com> writes:] > Following your code, emacs will return me the > following error: > > At startup: > > 'load-with-code-conversion: Symbol's value as > variable is void: smtpmail-smtp-server' Try to put this above the code and have that eval'd as well: (require 'smtpmail) > ...and trying to send my email, after asking me for > my server username, email and password... > > 'smtpmail-send-it: Sending failed: 550-Requested > action not taken: mailbox unavailable 550 Sender > address is not allowed.' That means you have either sent to an bogus target or your ISP don't allow you to send mails. But I think the problem is still with your configuration... Examine it more closely and ask again if you don't know. -- underground experts united http://user.it.uu.se/~embe8573 ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-26 19:57 ` Emanuel Berg @ 2016-02-26 23:56 ` cptvlaze 2016-02-27 0:06 ` John Mastro 2016-02-27 0:44 ` Emanuel Berg 0 siblings, 2 replies; 28+ messages in thread From: cptvlaze @ 2016-02-26 23:56 UTC (permalink / raw) To: Emanuel Berg; +Cc: help-gnu-emacs It does not seem to work :( I'm attaching my code, just for revision... ;; Firstly setup SMTP. (require 'smtpmail) (setq send-mail-function 'smtpmail-send-it) smtpmail-smtp-server "mail.foomail.com" smtpmail-smtp-service 587 user-mail-address "foo@foomail") ;; The line below puts sent items into an mbox file. (setq mail-default-headers "FCC: ~/Mail/Sent") ;; This puts my name correctly in email To/From lines. (setq user-full-name "Fooname Barname") ;; Setup Rmail (setq rmail-primary-inbox-list (cons (concat "pop3://" "foo@foomail.com" "foopassword" "@mail.foomail.com") nil)) --------- Now I'm getting: load-with-code-conversion: Invalid read syntax: ")" Ah, and emacs tells me to 'Send Mail via Gnus Mail'. I guess this code is for gnus, isn't it? Thank you for your attention! 26. Feb 2016 20:57 por embe8573@student.uu.se: > <> cptvlaze@tutamail.com> > writes:] > >> Following your code, emacs will return me the >> following error: >> >> At startup: >> >> 'load-with-code-conversion: Symbol's value as >> variable is void: smtpmail-smtp-server' > > Try to put this above the code and have that eval'd as > well: > > (require 'smtpmail) > >> ...and trying to send my email, after asking me for >> my server username, email and password... >> >> 'smtpmail-send-it: Sending failed: 550-Requested >> action not taken: mailbox unavailable 550 Sender >> address is not allowed.' > > That means you have either sent to an bogus target or > your ISP don't allow you to send mails. > > But I think the problem is still with your > configuration... Examine it more closely and ask again > if you don't know. > > -- > underground experts united > http://user.it.uu.se/~embe8573 ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-26 23:56 ` cptvlaze @ 2016-02-27 0:06 ` John Mastro 2016-02-27 4:05 ` Emanuel Berg 2016-02-27 0:44 ` Emanuel Berg 1 sibling, 1 reply; 28+ messages in thread From: John Mastro @ 2016-02-27 0:06 UTC (permalink / raw) To: help-gnu-emacs@gnu.org; +Cc: cptvlaze <cptvlaze@tutamail.com> wrote: > It does not seem to work :( I'm attaching my code, just for revision... > > ;; Firstly setup SMTP. > (require 'smtpmail) > (setq send-mail-function 'smtpmail-send-it) > smtpmail-smtp-server "mail.foomail.com" > smtpmail-smtp-service 587 > user-mail-address "foo@foomail") > ;; The line below puts sent items into an mbox file. > (setq mail-default-headers "FCC: ~/Mail/Sent") > ;; This puts my name correctly in email To/From lines. > (setq user-full-name "Fooname Barname") I don't know anything about POP3 or Rmail, but you have an extra right paren: (setq send-mail-function 'smtpmail-send-it) <<<<<< smtpmail-smtp-server "mail.foomail.com" smtpmail-smtp-service 587 user-mail-address "foo@foomail") Hope that helps -- john ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-27 0:06 ` John Mastro @ 2016-02-27 4:05 ` Emanuel Berg 2016-02-27 8:28 ` tomas 0 siblings, 1 reply; 28+ messages in thread From: Emanuel Berg @ 2016-02-27 4:05 UTC (permalink / raw) To: help-gnu-emacs John Mastro <john.b.mastro@gmail.com> writes: > I don't know anything about POP3 or Rmail Rmail is a mail-reader which you can hook to your mailbox by means of the POP or IMAP protocols (Post Office Protocol and Internet Message Access Protocol). It is an Emacs interface to using those protocols and a mail server, and then having the result organized, basically. You can also use Rmail as an interface to send mails - you can use the data displayed by Rmail to populate a message buffer, and then send it. But the message mode is actually Gnus! RMS, big-time mail writer and Rmail user, said about it that: Rmail is the primary Emacs mail-reader. I don't know how many people currently use it, but I will ignore any suggestion to treat it as unimportant. Well, no one is saying Rmail is unimportant but compared to Gnus it is very primitive even if you don't consider everything else that comes with Gnus that doesn't come with Rmail. For example Rmail stores every mail in a single file! This makes it a pain doing anything with it with common shell tools. It is very un-Unixy which isn't a matter of principle but an obstacle dealing with it. So Gnus is, apart from everything else it does which is alot, a much more powerful mail-reader than Rmail. The word "primary" is... well, something! as both Gnus and Rmail comes with Emacs out of the box. Rmail should not be confused with the shell tool rmail which has to do with ancient UUCP technology. The POPs including POP3 are 80s protocols on the TCP/IP stack that fetch mail batch style, by default deleting them on the mail server when done downloading the to the disk. Compared to IMAP POP is much simpler which is why it is still around. IMAP supports simultaneous connections to a mailbox, and also a mail directory structure which POP doesn't. IMAP can also do stuff to the material on the server while POP basically gets the data and then deletes it (on the server). Any questions? :) PS. When Lumumba was campaigning in Congo he always ended his speeches with that question. There were never any questions, because if they were, the person who asked was beaten up after the meeting was concluded. -- underground experts united http://user.it.uu.se/~embe8573 ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-27 4:05 ` Emanuel Berg @ 2016-02-27 8:28 ` tomas 2016-02-27 9:55 ` Eli Zaretskii 2016-02-28 2:11 ` Emanuel Berg 0 siblings, 2 replies; 28+ messages in thread From: tomas @ 2016-02-27 8:28 UTC (permalink / raw) To: help-gnu-emacs -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Sat, Feb 27, 2016 at 05:05:21AM +0100, Emanuel Berg wrote: > [...] For example Rmail stores > every mail in a single file! This makes it a pain > doing anything with it with common shell tools. It is > very un-Unixy which isn't a matter of principle but an > obstacle dealing with it [...] I doubt you know what you are talking about. I'm not myself a fan of maildir (one file per message plus hiding metadata in the file name -- I just don't like that) -- but it's as Unixy as it gets (qmail, D.J. Bernstein, ca 1990-some). > Any questions? > > :) No, Sir ;-) - -- t -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iEYEARECAAYFAlbRXjoACgkQBcgs9XrR2ka6EwCfedTnpAxpezepBUSuxPhs518l bfMAn0S7hmCkGCuSTdZi4yWK4GrqWTLM =WBLb -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-27 8:28 ` tomas @ 2016-02-27 9:55 ` Eli Zaretskii 2016-02-28 2:11 ` Emanuel Berg 1 sibling, 0 replies; 28+ messages in thread From: Eli Zaretskii @ 2016-02-27 9:55 UTC (permalink / raw) To: help-gnu-emacs > Date: Sat, 27 Feb 2016 09:28:42 +0100 > From: <tomas@tuxteam.de> > > On Sat, Feb 27, 2016 at 05:05:21AM +0100, Emanuel Berg wrote: > > > [...] For example Rmail stores > > every mail in a single file! This makes it a pain > > doing anything with it with common shell tools. It is > > very un-Unixy which isn't a matter of principle but an > > obstacle dealing with it [...] > > I doubt you know what you are talking about. He doesn't. (Rmail doesn't store each mail in a separate file.) ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-27 8:28 ` tomas 2016-02-27 9:55 ` Eli Zaretskii @ 2016-02-28 2:11 ` Emanuel Berg 2016-02-28 17:52 ` Robert Thorpe 1 sibling, 1 reply; 28+ messages in thread From: Emanuel Berg @ 2016-02-28 2:11 UTC (permalink / raw) To: help-gnu-emacs <tomas@tuxteam.de> writes: > myself a fan of maildir (one file per message plus > hiding metadata in the file name -- I just don't > like that) -- but it's as Unixy as it gets (qmail, > D.J. Bernstein, ca 1990-some). Development on UNIX in particular started in 1969. The first manual was published internally in 1971. But the by-now famous man pages aren't like the manual you get when you buy a decibel meter at Crooks"R"Us. It is as much a definition and specification of the system as a documentation thereof. UNIX was officially announced in 1973. The Unix file system is based on inodes to contain file attributes, which lend itself to elaborate file systems, including nested directory hierarchies... The manual, the man pages, (not) coincidentally, are not stored in a single file - ls /usr/share/man - but are a bunch of (g)roff files which are displayed by a pager, a precursor to the system of PDFs and LaTeX, as well as the web browsers that does the same with HTML and CSS to display a web page. The whole UNIX, by now GNU/Linux toolchain, is also based on operations on text, which are stored in files. If everything that was associated by purpose or form would be in single files, you could virtually throw away three quarters of the tools as they would be totally hampered anyway. -- underground experts united http://user.it.uu.se/~embe8573 ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-28 2:11 ` Emanuel Berg @ 2016-02-28 17:52 ` Robert Thorpe 2016-02-29 0:20 ` Gnus (was: Re: Help setting up POP3 email (rmail)) Emanuel Berg 2016-02-29 0:55 ` Help setting up POP3 email (rmail) Emanuel Berg 0 siblings, 2 replies; 28+ messages in thread From: Robert Thorpe @ 2016-02-28 17:52 UTC (permalink / raw) To: Emanuel Berg; +Cc: help-gnu-emacs Emanuel Berg <embe8573@student.uu.se> writes: > The whole UNIX, by now GNU/Linux toolchain, is also > based on operations on text, which are stored in > files. If everything that was associated by purpose or > form would be in single files, you could virtually > throw away three quarters of the tools as they would > be totally hampered anyway. I'll let maildir advocates comment on whether maildir is "Unixy" or not. Regarding Gnus vs Rmail, what's the difference? Rmail uses multiple mbox files and Gnus use multiple mbox files by default. They're both the same if you're tinkering with mail using command line tools. BR, Robert Thorpe ^ permalink raw reply [flat|nested] 28+ messages in thread
* Gnus (was: Re: Help setting up POP3 email (rmail)) 2016-02-28 17:52 ` Robert Thorpe @ 2016-02-29 0:20 ` Emanuel Berg 2016-02-29 2:31 ` Robert Thorpe 2016-02-29 0:55 ` Help setting up POP3 email (rmail) Emanuel Berg 1 sibling, 1 reply; 28+ messages in thread From: Emanuel Berg @ 2016-02-29 0:20 UTC (permalink / raw) To: help-gnu-emacs Robert Thorpe <rt@robertthorpeconsulting.com> writes: > Regarding Gnus vs Rmail, what's the difference? > Rmail uses multiple mbox files and Gnus use multiple > mbox files by default. They're both the same if > you're tinkering with mail using command line tools. Gnus is a universe in itself - much like Emacs, actually. It is a nexus for virtually all computer communication that you can do! - an absolute wonder to behold - one of the top 10 programs/systems ever written (with Unix/C and Lisp/Emacs as tied #1). I quick look at the Gnus manual isn't enough by far to grasp the scope: "The length of these documents varies from about 500 pages to about 550 pages, depending on which version of the manual you choose." [1] I'm right now using Gnus for RSS, Usenet (e.g., rec.bicycles.tech), mailing lists (thru Gmane), blogs (ditto Gwene), mail (backend nnml), as well as a Gnus-to-blog project I currently work on: Blogomatic! So far, I've not added any contents, only two test articles, but they work great - with zero metadata, and with HTML that validates perfectly, the files even sensibly indented and everything SEO'd with the category and title showing up lowercased in the URL. To add an article, I simply mail it to myself, then nnml does splitting to the group blogomatic iff the first subject word is - you guessed it - "blogomatic". Then I can use Gnus' sorting, searching, editing, and so on to access the material. Here is the zsh that does mail -> HTML: http://user.it.uu.se/~embe8573/conf/.zsh/blogomatic And here is the PHP - i.e., if executed, the blog: http://user.it.uu.se/~embe8573/blogomatic/index.php There is just an endless list what you can do with Gnus. For example, did you hear of: W r Do a Caesar rotate (rot13) on the article buffer (gnus-summary-caesar-message). Unreadable articles that tell you to read them with Caesar rotate or rot13. (Typically offensive jokes and such.) It’s commonly called “rot13” because each letter is rotated 13 positions in the alphabet, e.g., ‘B’ (letter #2) -> ‘O’ (letter #15). It is sometimes referred to as “Caesar rotate” because Caesar is rumored to have employed this form of, uh, somewhat weak encryption. W m Morse decode the article buffer (gnus-summary-morse-message). ? Here is what I did with Gnus so far, save for communicating: http://user.it.uu.se/~embe8573/conf/emacs-init/gnus/ [1] http://www.gnus.org/manual.html -- underground experts united http://user.it.uu.se/~embe8573 ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Gnus (was: Re: Help setting up POP3 email (rmail)) 2016-02-29 0:20 ` Gnus (was: Re: Help setting up POP3 email (rmail)) Emanuel Berg @ 2016-02-29 2:31 ` Robert Thorpe 2016-03-02 2:28 ` Emanuel Berg 0 siblings, 1 reply; 28+ messages in thread From: Robert Thorpe @ 2016-02-29 2:31 UTC (permalink / raw) To: Emanuel Berg; +Cc: help-gnu-emacs Emanuel Berg <embe8573@student.uu.se> writes: > Robert Thorpe <rt@robertthorpeconsulting.com> writes: > >> Regarding Gnus vs Rmail, what's the difference? >> Rmail uses multiple mbox files and Gnus use multiple >> mbox files by default. They're both the same if >> you're tinkering with mail using command line tools. > > Gnus is a universe in itself - much like Emacs, Nothing of what you say across 3 emails addresses the point I made above. BR, Robert Thorpe ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Gnus (was: Re: Help setting up POP3 email (rmail)) 2016-02-29 2:31 ` Robert Thorpe @ 2016-03-02 2:28 ` Emanuel Berg 0 siblings, 0 replies; 28+ messages in thread From: Emanuel Berg @ 2016-03-02 2:28 UTC (permalink / raw) To: help-gnu-emacs Robert Thorpe <rt@robertthorpeconsulting.com> writes: >>> Regarding Gnus vs Rmail, what's the difference? >>> Rmail uses multiple mbox files and Gnus use >>> multiple mbox files by default. They're both the >>> same if you're tinkering with mail using command >>> line tools. >> >> Gnus is a universe in itself - much like Emacs > > Nothing of what you say across 3 emails addresses > the point I made above. The difference between Rmail and Gnus is that: - Rmail is an application with a limited scope: virtually an Emacs interface which allows you to fetch mails from a mail server and then have them displayed and browsable. - Gnus is an ever-expanding system of programs which by now encompasses huge parts of all human communication that at this point is done with computers, offering multiple backends and methods available for each and every one of them, including mails (also the compose part which Rmail doesn't do - as for the fetching/organizing there are several backends and surplus programs considerably more advanced than anything Rmail does, e.g. scoring) - Gnus also comes with support for listbots (Gmane, the outstanding mail-to-NNTP gateway which is "Usenet 2.0"), plain Usenet (also NNTP, still available and carrying unique material), blogs (Gwene, also a gateway), and RSS - with integration with web browsers and many other odd but interesting features, and with many more to come. -- underground experts united http://user.it.uu.se/~embe8573 ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-28 17:52 ` Robert Thorpe 2016-02-29 0:20 ` Gnus (was: Re: Help setting up POP3 email (rmail)) Emanuel Berg @ 2016-02-29 0:55 ` Emanuel Berg 2016-02-29 8:47 ` tomas 1 sibling, 1 reply; 28+ messages in thread From: Emanuel Berg @ 2016-02-29 0:55 UTC (permalink / raw) To: help-gnu-emacs Robert Thorpe <rt@robertthorpeconsulting.com> writes: > Regarding Gnus vs Rmail, what's the difference? > Rmail uses multiple mbox files and Gnus use multiple > mbox files by default. They're both the same if > you're tinkering with mail using command line tools. I forgot, I have a Gnus "fan" home page! I did it many years ago so obviously I wouldn't phrase it exactly like that today. But in general I have to give the bloke some credit :) http://user.it.uu.se/~embe8573/gnus/ -- underground experts united http://user.it.uu.se/~embe8573 ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-29 0:55 ` Help setting up POP3 email (rmail) Emanuel Berg @ 2016-02-29 8:47 ` tomas 0 siblings, 0 replies; 28+ messages in thread From: tomas @ 2016-02-29 8:47 UTC (permalink / raw) To: help-gnu-emacs -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Mon, Feb 29, 2016 at 01:55:38AM +0100, Emanuel Berg wrote: [...] > I forgot, I have a Gnus "fan" home page! [...] [...] > http://user.it.uu.se/~embe8573/gnus/ Well, thanks for that! regards - -- t -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iEYEARECAAYFAlbUBbwACgkQBcgs9XrR2kaR5wCeJExFW5IF9WPH551UCK3UFpog q78AniQWOrECwLtCOZzMCIvWo2SxQxrV =KMP/ -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: Help setting up POP3 email (rmail) 2016-02-26 23:56 ` cptvlaze 2016-02-27 0:06 ` John Mastro @ 2016-02-27 0:44 ` Emanuel Berg 1 sibling, 0 replies; 28+ messages in thread From: Emanuel Berg @ 2016-02-27 0:44 UTC (permalink / raw) To: help-gnu-emacs <cptvlaze@tutamail.com> writes: > ;; Firstly setup SMTP. (require 'smtpmail) (setq > send-mail-function 'smtpmail-send-it) > smtpmail-smtp-server "mail.foomail.com" > smtpmail-smtp-service 587 user-mail-address > "foo@foomail") Mr. Mastro already mentioned the erroneous right parenthesis which is what in particular is causing your problem at this point. In general it is better to do `setq' for every variable, i.e., (setq send-mail-function 'smtpmail-send-it) (setq smtpmail-smtp-server "mail.foomail.com") ;; and so on The exception to the rule is when the same data appears in several variables, then you shouldn't have (for consistency reasons) the data several times but instead, e.g., (setq gnus-extra-headers '(To Cc Keywords Gcc Newsgroups X-Spam-Flag) nnmail-extra-headers gnus-extra-headers) (But you can have several setq there as well.) > ;; The line below puts sent items into > an mbox file. (setq mail-default-headers "FCC: > ~/Mail/Sent") In Gnus you can also have a designated archive group for sent material, e.g. (setq gnus-message-archive-group "nnml:mail.sent") > ;; This puts my name correctly in email > To/From lines. (setq user-full-name "Fooname Barname") We are waiting for that to happen :) > Ah, and emacs tells me to 'Send Mail via Gnus Mail'. > I guess this code is for gnus, isn't it? Gnus can use it but so can Rmail and just about anything. So you can focus on getting all data right. Once they are, you should be a stone-throw away from getting either Rmail, Gnus, or for that matter any other mail client to work with just another few lines of application-specific configuration. > Thank you for your attention! Thank us by getting Rmail or Gnus up with at proper To:, and then use proper citing/quoting in all your mails, i.e. not top-posting... -- underground experts united http://user.it.uu.se/~embe8573 ^ permalink raw reply [flat|nested] 28+ messages in thread
end of thread, other threads:[~2016-03-02 2:28 UTC | newest] Thread overview: 28+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2016-02-23 19:21 Help setting up POP3 email (rmail) cptvlaze 2016-02-23 22:41 ` Emanuel Berg 2016-02-24 0:41 ` Robert Thorpe 2016-02-24 2:50 ` Nick Dokos 2016-02-24 3:11 ` Emanuel Berg 2016-02-24 16:41 ` Nick Dokos 2016-02-24 14:38 ` cptvlaze 2016-02-24 14:46 ` tomas 2016-02-24 15:34 ` cptvlaze 2016-02-24 20:16 ` Robert Thorpe 2016-02-24 20:28 ` Robert Thorpe 2016-02-24 23:56 ` Emanuel Berg 2016-02-24 23:47 ` Emanuel Berg 2016-02-26 18:46 ` cptvlaze 2016-02-26 19:57 ` Emanuel Berg 2016-02-26 23:56 ` cptvlaze 2016-02-27 0:06 ` John Mastro 2016-02-27 4:05 ` Emanuel Berg 2016-02-27 8:28 ` tomas 2016-02-27 9:55 ` Eli Zaretskii 2016-02-28 2:11 ` Emanuel Berg 2016-02-28 17:52 ` Robert Thorpe 2016-02-29 0:20 ` Gnus (was: Re: Help setting up POP3 email (rmail)) Emanuel Berg 2016-02-29 2:31 ` Robert Thorpe 2016-03-02 2:28 ` Emanuel Berg 2016-02-29 0:55 ` Help setting up POP3 email (rmail) Emanuel Berg 2016-02-29 8:47 ` tomas 2016-02-27 0:44 ` Emanuel Berg
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).