unofficial mirror of help-gnu-emacs@gnu.org
 help / color / mirror / Atom feed
* recommended Chinese input methods in emacs?
@ 2004-06-09 22:54 Benjamin Rutt
  2004-06-10  0:34 ` William Xuuu
  2004-06-14 12:38 ` LEE Sau Dan
  0 siblings, 2 replies; 3+ messages in thread
From: Benjamin Rutt @ 2004-06-09 22:54 UTC (permalink / raw)


The version of GNU Emacs I'm running comes with the following chinese
input methods:

chinese-4corner        chinese-array30
chinese-b5-quick       chinese-b5-tsangchi
chinese-ccdospy        chinese-cns-quick
chinese-cns-tsangchi   chinese-ctlau
chinese-ctlaub         chinese-ecdict
chinese-etzy           chinese-punct
chinese-punct-b5       chinese-py
chinese-py-b5          chinese-py-punct
chinese-py-punct-b5    chinese-qj
chinese-qj-b5          chinese-sw
chinese-tonepy         chinese-tonepy-punct
chinese-ziranma        chinese-zozy

Can someone recommend one or two of these input methods as being
either the easiest one to learn and/or the one that leads to the
highest productivity in the long run, for a native Chinese speaker?
Thanks,
-- 
Benjamin Rutt

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: recommended Chinese input methods in emacs?
  2004-06-09 22:54 recommended Chinese input methods in emacs? Benjamin Rutt
@ 2004-06-10  0:34 ` William Xuuu
  2004-06-14 12:38 ` LEE Sau Dan
  1 sibling, 0 replies; 3+ messages in thread
From: William Xuuu @ 2004-06-10  0:34 UTC (permalink / raw)


Benjamin Rutt <rutt.4+news@osu.edu> writes:

> The version of GNU Emacs I'm running comes with the following chinese
> input methods:
>
> chinese-4corner        chinese-array30
> chinese-b5-quick       chinese-b5-tsangchi
> chinese-ccdospy        chinese-cns-quick
> chinese-cns-tsangchi   chinese-ctlau
> chinese-ctlaub         chinese-ecdict
> chinese-etzy           chinese-punct
> chinese-punct-b5       chinese-py
> chinese-py-b5          chinese-py-punct
> chinese-py-punct-b5    chinese-qj
> chinese-qj-b5          chinese-sw
> chinese-tonepy         chinese-tonepy-punct
> chinese-ziranma        chinese-zozy
>
> Can someone recommend one or two of these input methods as being
> either the easiest one to learn and/or the one that leads to the
> highest productivity in the long run, for a native Chinese speaker?
> Thanks,

I recommend using an external program such as zhcon or fcitx(if your os is
linux). But you may also try the built-in input methods yourself, among which
the chinese-py may be the easiest.

-- 
William Xuuu
Humans remove heyyy_ from the email address to reply.

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: recommended Chinese input methods in emacs?
  2004-06-09 22:54 recommended Chinese input methods in emacs? Benjamin Rutt
  2004-06-10  0:34 ` William Xuuu
@ 2004-06-14 12:38 ` LEE Sau Dan
  1 sibling, 0 replies; 3+ messages in thread
From: LEE Sau Dan @ 2004-06-14 12:38 UTC (permalink / raw)


[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=utf-7, Size: 2499 bytes --]

>>>>> "Benjamin" == Benjamin Rutt <rutt.4+news@osu.edu> writes:

    Benjamin> The version of GNU Emacs I'm running comes with the
    Benjamin> following chinese input methods:

    Benjamin> chinese-4corner chinese-array30 chinese-b5-quick
    Benjamin> chinese-b5-tsangchi chinese-ccdospy chinese-cns-quick
    Benjamin> chinese-cns-tsangchi chinese-ctlau chinese-ctlaub
    Benjamin> chinese-ecdict chinese-etzy chinese-punct
    Benjamin> chinese-punct-b5 chinese-py chinese-py-b5
    Benjamin> chinese-py-punct chinese-py-punct-b5 chinese-qj
    Benjamin> chinese-qj-b5 chinese-sw chinese-tonepy
    Benjamin> chinese-tonepy-punct chinese-ziranma chinese-zozy

    Benjamin> Can someone recommend one or two of these input methods

It's up  to you, your own  taste and personal  preference.  That's why
there are so many there to choose from.


    Benjamin> as being either the easiest one to learn 

Well...  if  you speak  Mandarin (or something  close) as  your mother
tongue  and  you have  learnt  Pinyin,  then chinese-tonepy-punct  and
chinese-py-punct-b5  would be  the easiest.   If you  speak Cantonese,
then chinese-ctlaub and chinese-ctlau would be easy IF you're familiar
with the C.T. Lau Romanization of Cantonese.


    Benjamin> and/or the one that leads to the highest productivity in
    Benjamin> the long run, for a native Chinese speaker?

Cangjie (for  traditional characters).   It is ubiquitous  on computer
systems  supporting   traditional  characters  (Big5   encoding).   It
requires some training.  Once trained, you can easily get to 20+ chars
per minute.   Professional typists can  reach 40 or 60.   Some wizards
are  reported to  type  at 200  chars  per minute!   This is  possible
because Canjie  is shape-based, and  hence doesn't need to  go through
the  shape->sound->code  process  when   one  types.   It's  a  direct
shape->code translation.  So, touch-typing is possible.

If  you want  some speed  but  don't want  to spend  time on  training
yourself, try  chinese-4corner.  It is shape-based, too.   So, you can
enter characters  even when you don't  know how to  pronounce it.  You
need to  learn the "4-corner" rules, which  is just a 4  x 7 character
poem.  Quite easy to learn.  Reasonably fast (not very fast due to the
high frequency of code collision).



-- 
Lee Sau Dan                     +Z05biGVm-                          ~{@nJX6X~}

E-mail: danlee@informatik.uni-freiburg.de
Home page: http://www.informatik.uni-freiburg.de/~danlee

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2004-06-14 12:38 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-06-09 22:54 recommended Chinese input methods in emacs? Benjamin Rutt
2004-06-10  0:34 ` William Xuuu
2004-06-14 12:38 ` LEE Sau Dan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).