Re: puzzling byte-compile-file message: `=' called for effect

Re: puzzling byte-compile-file message: `=' called for effect

[Jim Ottaway]

>>>>> Drew Adams <drew.adams@oracle.com> writes:

> The term "for effect" is correct here, but I don't think it is as clear as
> it could be. The compiler is suggesting that, if the `=' expression is
> useful, it must be useful because of side effects that occur during its
> evaluation.

> I think the compiler should explicitly say that the resulting _value_ of the
> `=' expression is not used. It might also say that the `=' expression may be
> useful for its side effects (or side effects of its subexpressions), but the
> resulting value has no effect on the overall code. At a minimum, the word
> "side" should be added to "effect".

Yes, I agree.  I was so puzzled by the elliptical message that I
missed the obvious error in my code.

> The message might better say:

>  "Warning: `=' return value ignored. Is the expression useful
>            for its side effects?"

Something like that, I agree, even simply "`=' called for side effect
alone".

> Ccing emacs-devel, as I think the message should be clarified
> somehow. 

Me too.

Regards,

-- 
Jim Ottaway

Re: puzzling byte-compile-file message: `=' called for effect

[Yevgeniy Makarov]

Jim Ottaway wrote:
> When byte-compiling a file, I get this message:
> 
> In nl-publish-markup-list:
> nested-lists.el:395:19:Warning: `=' called for effect
> 
> What does this mean?  I grepped for 'for effect' in Emacs's
> lisp/emacs-lisp subdirectory, and found the relevant parts of
> byte-opt.el, but I am no wiser.
> 
> The code with the '=' in it is:
> 
> (when (and nl-paras-fixed-p
>                      (save-excursion
>                        (goto-char nl-markup-start)
>                        (goto-char (muse-line-beginning-position))
>                        (= (forward-line -1) 0)
>                        (looking-at "^\\S-")))
>             (with-current-buffer nl-temp-buffer
>               (goto-char (point-min))
>               (insert "\n\n")))
> 
> Any ideas? Does it mean that the byte-compiler thinks that
> (forward-line -1) will always return 0 at that point? Or does 'for
> effect' mean something else?
> 

Again, I am not an expert, so I don't know if this is useful. But the 
fact is that save-excursion executes its arguments in turn and returns 
the value of the last one. Therefore, the value of (= (forward-line -1) 
0) is not used. This line produces a side effect, however, namely, 
(forward-line -1). But the wrapping of = around it does not make sense 
because its value is irrelevant for the rest of the program.

Yevgeniy

Re: puzzling byte-compile-file message: `=' called for effect

[Jim Ottaway]

>>>>> Yevgeniy Makarov <emakarov@cs.indiana.edu> writes:



> Again, I am not an expert, so I don't know if this is useful. But the
> fact is that save-excursion executes its arguments in turn and returns
> the value of the last one. Therefore, the value of (= (forward-line
> -1) 0) is not used. This line produces a side effect, however, namely,
> (forward-line -1). But the wrapping of = around it does not make sense
> because its value is irrelevant for the rest of the program.

> Yevgeniy

Ahh yes, of course! Thank you, I have the save-excursion in the wrong
place, it should be

(when (save-excursion
        (and nl-paras-fixed-p
             (goto-char nl-markup-start)
             (goto-char (muse-line-beginning-position))
             (= (forward-line -1) 0)
             (looking-at "^\\S-")))
  (with-current-buffer nl-temp-buffer
    (goto-char (point-min))
    (insert "\n\n")))

I looked at it for ages without noticing that, thank you again.

Regards,

-- 
Jim Ottaway

RE: puzzling byte-compile-file message: `=' called for effect

[Drew Adams]

    Jim Ottaway wrote:
    > When byte-compiling a file, I get this message:
    >
    > In nl-publish-markup-list:
    > nested-lists.el:395:19:Warning: `=' called for effect
    >
    > What does this mean?  I grepped for 'for effect' in Emacs's
    > lisp/emacs-lisp subdirectory, and found the relevant parts of
    > byte-opt.el, but I am no wiser.
    >
    > The code with the '=' in it is:
    >
    > (when (and nl-paras-fixed-p
    >                      (save-excursion
    >                        (goto-char nl-markup-start)
    >                        (goto-char (muse-line-beginning-position))
    >                        (= (forward-line -1) 0)
    >                        (looking-at "^\\S-")))
    >             (with-current-buffer nl-temp-buffer
    >               (goto-char (point-min))
    >               (insert "\n\n")))
    >
    > Any ideas? Does it mean that the byte-compiler thinks that
    > (forward-line -1) will always return 0 at that point? Or does 'for
    > effect' mean something else?

    Again, I am not an expert, so I don't know if this is useful. But the
    fact is that save-excursion executes its arguments in turn and returns
    the value of the last one. Therefore, the value of (= (forward-line -1)
    0) is not used. This line produces a side effect, however, namely,
    (forward-line -1). But the wrapping of = around it does not make sense
    because its value is irrelevant for the rest of the program.

The term "for effect" is correct here, but I don't think it is as clear as
it could be. The compiler is suggesting that, if the `=' expression is
useful, it must be useful because of side effects that occur during its
evaluation.

I think the compiler should explicitly say that the resulting _value_ of the
`=' expression is not used. It might also say that the `=' expression may be
useful for its side effects (or side effects of its subexpressions), but the
resulting value has no effect on the overall code. At a minimum, the word
"side" should be added to "effect".

The message might better say:

 "Warning: `=' return value ignored. Is the expression useful
           for its side effects?"

Ccing emacs-devel, as I think the message should be clarified somehow.

-----

BTW - Another case where you see this "for effect" warning is this:

 (and (< emacs-major-version 21) (eval-when-compile (require 'cl)))

When byte-compiled in an Emacs version > 20, the compiler determines that
the (< _ _) expression in this top-level code is FALSE, and lets you know
that the TRUE branch of the `if' is never taken.

In this case, a different message might be better, IMO. The `<' is _not_
called for its side effects but for its value. It's just that the Emacs 22
byte compiler sees that (< 22 21) is always nil. The message should say
something like "`<' expression always returns nil".

HTH.

Re: puzzling byte-compile-file message: `=' called for effect

[Richard M. Stallman]

    The message might better say:

     "Warning: `=' return value ignored. Is the expression useful
	       for its side effects?"

I will clarify the warning text.  Thanks.

puzzling byte-compile-file message: `=' called for effect

[Jim Ottaway]

When byte-compiling a file, I get this message:

In nl-publish-markup-list:
nested-lists.el:395:19:Warning: `=' called for effect

What does this mean?  I grepped for 'for effect' in Emacs's
lisp/emacs-lisp subdirectory, and found the relevant parts of
byte-opt.el, but I am no wiser.

The code with the '=' in it is:

(when (and nl-paras-fixed-p
                     (save-excursion
                       (goto-char nl-markup-start)
                       (goto-char (muse-line-beginning-position))
                       (= (forward-line -1) 0)
                       (looking-at "^\\S-")))
            (with-current-buffer nl-temp-buffer
              (goto-char (point-min))
              (insert "\n\n")))

Any ideas? Does it mean that the byte-compiler thinks that
(forward-line -1) will always return 0 at that point? Or does 'for
effect' mean something else?

-- 
Jim Ottaway