Use the characters "+" and "-" in regular expressions

Use the characters "+" and "-" in regular expressions

[steve-humphreys]

Is there a way to use the character "+" and "-" in regular expressions?

Re: Use the characters "+" and "-" in regular expressions

[Skip Montanaro]

> Is there a way to use the character "+" and "-" in regular expressions?
>

Yes, use character sets, e.g. [+] and [-]. If more characters are in a set
along with a hyphen, that hyphen needs to be the first element of the set
so as not to be interpreted as defining a range of characters. So, the
character set containing 0, 9 and hyphen is [-09] or [-90], not [0-9],
which would include all digits between 0 and 9, but not the hyphen.

Skip

>

Re: Use the characters "+" and "-" in regular expressions

[steve-humphreys]

   I want to match a space followed by a series of "+" or "-" or "."


   Sent: Thursday, May 20, 2021 at 4:17 AM
   From: "Skip Montanaro" <skip.montanaro@gmail.com>
   To: steve-humphreys@gmx.com
   Cc: "Help Gnu Emacs" <help-gnu-emacs@gnu.org>
   Subject: Re: Use the characters "+" and "-" in regular expressions

     Is there a way to use the character "+" and "-" in regular
     expressions?


   Yes, use character sets, e.g. [+] and [-]. If more characters are in a
   set along with a hyphen, that hyphen needs to be the first element of
   the set so as not to be interpreted as defining a range of characters.
   So, the character set containing 0, 9 and hyphen is [-09] or [-90], not
   [0-9], which would include all digits between 0 and 9, but not the
   hyphen.

   Skip

Re: Use the characters "+" and "-" in regular expressions

[tomas]

[-- Attachment #1: Type: text/plain, Size: 936 bytes --]

On Wed, May 19, 2021 at 11:17:34AM -0500, Skip Montanaro wrote:
> > Is there a way to use the character "+" and "-" in regular expressions?

Plus "+" is special. Minus "-" is not.

> Yes, use character sets, e.g. [+] and [-]. If more characters are in a set
> along with a hyphen, that hyphen needs to be the first element of the set
> so as not to be interpreted as defining a range of characters. So, the
> character set containing 0, 9 and hyphen is [-09] or [-90], not [0-9],
> which would include all digits between 0 and 9, but not the hyphen.

Or escape with backslash. Note that due to string syntax you need
two of them.

Besides, the '-' isn't a special character in regexps (except whithin
brackets), so your bracket trick is rather counter-productive. Just
use as-is (except in brackets, where it should, as you say, go last,
to distinguish it from a range marker).

  (string-match "-" "Viala-du-Tarn")
  => 5

Cheers
 - t

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: Use the characters "+" and "-" in regular expressions

[Skip Montanaro]

> > Yes, use character sets, e.g. [+] and [-].

> Plus "+" is special. Minus "-" is not.
...
> Or escape with backslash. Note that due to string syntax you need
> two of them.

Yes, correct you are, Tomas. I long ago got used to putting most
punctuation in character sets regardless of its specialness, if for no
other reason than to help them stand out when rereading the code
later. I also find backslashes ugly (especially within Lisp strings
where there is no such thing as a "raw" string such as in Python, so
you wind up doubling them). Also, by reflexively putting punctuation
in character sets I rarely have to remember which are special, or in
what contexts. For example, "$" is special at the end of a regular
expression, but not elsewhere. Similarly, "^" is special only at the
start. The various special cases just make it kind of tedious and easy
to get wrong. By placing punctuation in character sets you declare to
the reader, "This is not special, no matter what you might think."
Well, except for hyphens inside character sets. :) Still, that reduces
the special cases from N to 1.

Skip

Re: Use the characters "+" and "-" in regular expressions

[Yuri Khan]

On Wed, 19 May 2021 at 23:26, <steve-humphreys@gmx.com> wrote:
>
>    I want to match a space followed by a series of "+" or "-" or "."

You forgot to tell us what you tried, and how it doesn’t do what you want.

(You probably also forgot to read the manual chapters (info "(emacs)
Regexps") and (info "(elisp) Regular Expressions").)

Re: Use the characters "+" and "-" in regular expressions

[steve-humphreys]

I had tried

(string-match " [-\+\.]+" s)

> Sent: Thursday, May 20, 2021 at 4:47 AM
> From: "Yuri Khan" <yuri.v.khan@gmail.com>
> To: steve-humphreys@gmx.com
> Cc: "Skip Montanaro" <skip.montanaro@gmail.com>, "Help Gnu Emacs" <help-gnu-emacs@gnu.org>
> Subject: Re: Use the characters "+" and "-" in regular expressions
>
> On Wed, 19 May 2021 at 23:26, <steve-humphreys@gmx.com> wrote:
> >
> >    I want to match a space followed by a series of "+" or "-" or "."
> 
> You forgot to tell us what you tried, and how it doesn’t do what you want.
> 
> (You probably also forgot to read the manual chapters (info "(emacs)
> Regexps") and (info "(elisp) Regular Expressions").)
> 
>

Re: Use the characters "+" and "-" in regular expressions

[Marcin Borkowski]

On 2021-05-19, at 18:39, Skip Montanaro <skip.montanaro@gmail.com> wrote:

>> > Yes, use character sets, e.g. [+] and [-].
>
>> Plus "+" is special. Minus "-" is not.
> ...
>> Or escape with backslash. Note that due to string syntax you need
>> two of them.
>
> Yes, correct you are, Tomas. I long ago got used to putting most
> punctuation in character sets regardless of its specialness, if for no
> other reason than to help them stand out when rereading the code
> later. I also find backslashes ugly (especially within Lisp strings
> where there is no such thing as a "raw" string such as in Python, so
> you wind up doubling them). Also, by reflexively putting punctuation
> in character sets I rarely have to remember which are special, or in
> what contexts. For example, "$" is special at the end of a regular
> expression, but not elsewhere. Similarly, "^" is special only at the
> start. The various special cases just make it kind of tedious and easy
> to get wrong. By placing punctuation in character sets you declare to
> the reader, "This is not special, no matter what you might think."
> Well, except for hyphens inside character sets. :) Still, that reduces

And except the caret right after the `['.

> the special cases from N to 1.

So, N to 2.  (Still a win, though.)

Best,

-- 
Marcin Borkowski
http://mbork.pl

Re: Use the characters "+" and "-" in regular expressions

[tomas]

[-- Attachment #1: Type: text/plain, Size: 788 bytes --]

On Wed, May 19, 2021 at 11:39:46AM -0500, Skip Montanaro wrote:
> > > Yes, use character sets, e.g. [+] and [-].
> 
> > Plus "+" is special. Minus "-" is not.
> ...
> > Or escape with backslash. Note that due to string syntax you need
> > two of them.
> 
> Yes, correct you are, Tomas. I long ago got used to putting most
> punctuation in character sets regardless of its specialness, if for no
> other reason than to help them stand out when rereading the code
> later [...]

Right: brackets help curbing the multiplication of backslashes.

I've found another strange application for that: "ps waux | grep foo"
will find your "grep foo" in the process list. Decorating one of your
characters in "foo" with brackets will fix that. Hacky, but it works :)

Cheers
 - t

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: Use the characters "+" and "-" in regular expressions

[tomas]

[-- Attachment #1: Type: text/plain, Size: 1058 bytes --]

On Wed, May 19, 2021 at 07:39:10PM +0200, steve-humphreys@gmx.com wrote:
> > Sent: Thursday, May 20, 2021 at 4:47 AM
> > From: "Yuri Khan" <yuri.v.khan@gmail.com>
> > To: steve-humphreys@gmx.com
> > Cc: "Skip Montanaro" <skip.montanaro@gmail.com>, "Help Gnu Emacs" <help-gnu-emacs@gnu.org>
> > Subject: Re: Use the characters "+" and "-" in regular expressions
> >
> > On Wed, 19 May 2021 at 23:26, <steve-humphreys@gmx.com> wrote:
> > >
> > >    I want to match a space followed by a series of "+" or "-" or "."
> > 
> > You forgot to tell us what you tried, and how it doesn’t do what you want.
> > 
> > (You probably also forgot to read the manual chapters (info "(emacs)
> > Regexps") and (info "(elisp) Regular Expressions").)
> I had tried
> 
> (string-match " [-\+\.]+" s)

But you forgot to read the manual, as Skip noted. Otherwise you would have
read that whithin the [], + and . are not special. Don't escape them.
But the - is special. Put it at the end.

So your bracket sub-expression should be [+.-].

Cheers
 - t

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

RE: [External] : Use the characters "+" and "-" in regular expressions

[Drew Adams]

> Is there a way to use the character "+" and "-" in regular expressions?

Ask Emacs!

1. `C-h i' Choose Elisp manual.
2. `i regexp TAB', and complete to
   `regexp, special characters in'
3. Read about `\':

   it quotes the special characters

   Because ‘\’ quotes special characters, ‘\$’ is a
   regular expression that matches only ‘$’, and ‘\[’ is
   a regular expression that matches only ‘[’, and so on.

IOW, `\+' and `\-' match (only) `+' and `-', respectively.

Another way to match special chars literally is to include
them in a character alternative, also described in the same
page of the manual.

`[+]' matches only `+', `[-]' matches only `+' or `-', and
`[-+]' and `[+-]' match either `+' or `-'.

Note too that `-' in a char alternative behaves specially:

   To include a ‘-’, write ‘-’ as the first or last
   character of the character alternative, or as the
   upper bound of a range.  Thus, ‘[]-]’ matches both
   ‘]’ and ‘-’.

In `[-+]' and `[+-]', the `-' is the first or last char in
the alternative.

RE: [External] : Re: Use the characters "+" and "-" in regular expressions

[Drew Adams]

>> Yes, use character sets, e.g. [+] and [-].
>
> I want to match a space followed by a series of "+" or "-" or "."

Yes, and?  The answer is right above your question.

Do you mean a series of one or more or a series of
zero or more?  (Or 42 or more or...?)  Your problem
statements are piecemeal.

[-+.]* is zero or more.  [-+.]+ is one or more.

As Tomas pointed out, you need not escape the `-'.
But it's easier if you do.  If not, you need to group
the pattern that gets repeated:

\(-[+.]\)* is zero or more.  \(-[+.]\)+ is one or more.

RE: [External] : Re: Use the characters "+" and "-" in regular expressions

[Drew Adams]

> You forgot to tell us what you tried, and how it doesn’t do what you
> want.
> 
> (You probably also forgot to read the manual chapters (info "(emacs)
> Regexps") and (info "(elisp) Regular Expressions").)

+1.

Re: Use the characters "+" and "-" in regular expressions

[tomas]

[-- Attachment #1: Type: text/plain, Size: 359 bytes --]

On Wed, May 19, 2021 at 09:16:22PM +0200, tomas wrote:
> On Wed, May 19, 2021 at 07:39:10PM +0200, steve-humphreys@gmx.com wrote:
> > > Sent: Thursday, May 20, 2021 at 4:47 AM
> > > From: "Yuri Khan" <yuri.v.khan@gmail.com>

[...]

> But you forgot to read the manual, as Skip noted [...]

Ugh. "...as Yuri noted". Sorry for the mis-attribution.

Cheers
 - t

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: Use the characters "+" and "-" in regular expressions

[Yuri Khan]

On Thu, 20 May 2021 at 00:39, <steve-humphreys@gmx.com> wrote:
>
> I had tried
>
> (string-match " [-\+\.]+" s)

This ought to work, even though you’re using backslashes incorrectly.

* + and . are not special inside a character class; you don’t need to
escape them.
* If you wanted to escape them in a regexp that is inside a string,
you should have put two backslashes.
* Escaping them with a single backslash only acts on the string syntax
level; because + and . are not special in a string, they pass through
as themselves so the regexp is the same as if you had written "
[-+.]+".


(string-match " [-+.]+" ";; ----")
⇒ 2
(string-match " [-+.]+" ";; ++++")
⇒ 2
(string-match " [-+.]+" ";; ....")
⇒ 2
(string-match " [-+.]+" ";; -+-+")
⇒ 2

Re: Use the characters "+" and "-" in regular expressions

[tomas]

[-- Attachment #1: Type: text/plain, Size: 1072 bytes --]

On Thu, May 20, 2021 at 02:30:22AM +0700, Yuri Khan wrote:
> On Thu, 20 May 2021 at 00:39, <steve-humphreys@gmx.com> wrote:
> >
> > I had tried
> >
> > (string-match " [-\+\.]+" s)
> 
> This ought to work, even though you’re using backslashes incorrectly.

Hm. According to the docs, the dash should go last, but a test
actually confirms that it works in first position.

OTOH, the regex(7) man page says "first or last" position. Since
the underlying lib is probably the same, I'd guess that this is
an omission in the Emacs doc.

> * + and . are not special inside a character class; you don’t need to
> escape them.

Exactly.

> * If you wanted to escape them in a regexp that is inside a string,
> you should have put two backslashes.
>
> * Escaping them with a single backslash only acts on the string syntax
> level; because + and . are not special in a string, they pass through
> as themselves so the regexp is the same as if you had written "
> [-+.]+".

So, as seen by the regexp they weren't escaped anyway ;-)

Cheers
 - t

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

RE: [External] : Re: Use the characters "+" and "-" in regular expressions

[Drew Adams]

> Hm. According to the docs, the dash should go last, but 
> a test actually confirms that it works in first position.

I quoted this from (elisp) `Regexp Special':

   To include a ‘-’, write ‘-’ as the first or last
                                      ^^^^^^^^^^^^^
   character of the character alternative, or as the
   upper bound of a range.  Thus, ‘[]-]’ matches both
   ‘]’ and ‘-’.

That's from Emacs 26 (and all prior releases, at least
as far back as Emacs 20).  But yes, they changed that
text for Emacs 27, to this:

   To include ‘-’, put it at the end.
                          ^^^^^^^^^^
___

For Emacs 20, it says this:

   To include a `-', write `-' as the first or last
   character of the character alternative, or put it
   after a range.  Thus, `[]-]' matches both `]' and
   `-'.

Re: RE: [External] : Use the characters "+" and "-" in regular expressions

[steve-humphreys]

Have done as follows but cannot see the result.  Have read through
the table of valid format specifications, and the other options are
mostly about printing numbers.

(message " ")
(message "*** ***")
(setq s (string-match "[+]+"  "++++++++++++++++"))
message("%s" s)
(setq s (string-match "[+-]+" "++++++++++++++++"))
message("%s" s)
(setq s (string-match "[+-]+" "----------------"))
message("%s"  s)






> Sent: Thursday, May 20, 2021 at 9:59 AM
> From: "Drew Adams" <drew.adams@oracle.com>
> To: "tomas@tuxteam.de" <tomas@tuxteam.de>, "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> Subject: RE: [External] : Re: Use the characters "+" and "-" in regular expressions
>
> > Hm. According to the docs, the dash should go last, but 
> > a test actually confirms that it works in first position.
> 
> I quoted this from (elisp) `Regexp Special':
> 
>    To include a ‘-’, write ‘-’ as the first or last
>                                       ^^^^^^^^^^^^^
>    character of the character alternative, or as the
>    upper bound of a range.  Thus, ‘[]-]’ matches both
>    ‘]’ and ‘-’.
> 
> That's from Emacs 26 (and all prior releases, at least
> as far back as Emacs 20).  But yes, they changed that
> text for Emacs 27, to this:
> 
>    To include ‘-’, put it at the end.
>                           ^^^^^^^^^^
> ___
> 
> For Emacs 20, it says this:
> 
>    To include a `-', write `-' as the first or last
>    character of the character alternative, or put it
>    after a range.  Thus, `[]-]' matches both `]' and
>    `-'.
>

Dash in regexp character classes: Beginnig vs. end [was: Use the characters "+" and "-" in regular expressions]

[tomas]

[-- Attachment #1: Type: text/plain, Size: 1041 bytes --]

On Wed, May 19, 2021 at 09:59:11PM +0000, Drew Adams wrote:
> > Hm. According to the docs, the dash should go last, but 
> > a test actually confirms that it works in first position.
> 
> I quoted this from (elisp) `Regexp Special':
> 
>    To include a ‘-’, write ‘-’ as the first or last
>                                       ^^^^^^^^^^^^^
>    character of the character alternative, or as the
>    upper bound of a range.  Thus, ‘[]-]’ matches both
>    ‘]’ and ‘-’.
> 
> That's from Emacs 26 (and all prior releases, at least
> as far back as Emacs 20).  But yes, they changed that
> text for Emacs 27, to this:
> 
>    To include ‘-’, put it at the end.
>                           ^^^^^^^^^^
> ___
> 
> For Emacs 20, it says this:
> 
>    To include a `-', write `-' as the first or last
>    character of the character alternative, or put it
>    after a range.  Thus, `[]-]' matches both `]' and
>    `-'.

Oh. That is interesting. Anyone knows why that change?

Cheers
 - t

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

[External] : Use the characters "+" and "-" in regular expressions

[steve-humphreys]

I wonder why I am getting 

Symbol's value as variable is void: message

(message " ")
(message "*** ***")
(setq s (string-match "[+]+"  "++++++++++++++++"))
message("%s" s)
(setq s (string-match "[+-]+" "++++++++++++++++"))
message("%s" s)
(setq s (string-match "[+-]+" "----------------"))
message("%s"  s)
 
> 
> 
> 
> 
> 
> > Sent: Thursday, May 20, 2021 at 9:59 AM
> > From: "Drew Adams" <drew.adams@oracle.com>
> > To: "tomas@tuxteam.de" <tomas@tuxteam.de>, "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> > Subject: RE: [External] : Re: Use the characters "+" and "-" in regular expressions
> >
> > > Hm. According to the docs, the dash should go last, but 
> > > a test actually confirms that it works in first position.
> > 
> > I quoted this from (elisp) `Regexp Special':
> > 
> >    To include a ‘-’, write ‘-’ as the first or last
> >                                       ^^^^^^^^^^^^^
> >    character of the character alternative, or as the
> >    upper bound of a range.  Thus, ‘[]-]’ matches both
> >    ‘]’ and ‘-’.
> > 
> > That's from Emacs 26 (and all prior releases, at least
> > as far back as Emacs 20).  But yes, they changed that
> > text for Emacs 27, to this:
> > 
> >    To include ‘-’, put it at the end.
> >                           ^^^^^^^^^^
> > ___
> > 
> > For Emacs 20, it says this:
> > 
> >    To include a `-', write `-' as the first or last
> >    character of the character alternative, or put it
> >    after a range.  Thus, `[]-]' matches both `]' and
> >    `-'.
> >
> 
>

Re: Dash in regexp character classes: Beginnig vs. end [was: Use the characters "+" and "-" in regular expressions]

[Robert Pluim]

>>>>> On Thu, 20 May 2021 09:15:29 +0200, "tomas@tuxteam.de" <tomas@tuxteam.de> said:

    >> I quoted this from (elisp) `Regexp Special':
    >> 
    >> To include a ‘-’, write ‘-’ as the first or last
    >> ^^^^^^^^^^^^^
    >> character of the character alternative, or as the
    >> upper bound of a range.  Thus, ‘[]-]’ matches both
    >> ‘]’ and ‘-’.
    >> 
    >> That's from Emacs 26 (and all prior releases, at least
    >> as far back as Emacs 20).  But yes, they changed that
    >> text for Emacs 27, to this:
    >> 
    >> To include ‘-’, put it at the end.
    >> ^^^^^^^^^^
    >> ___
    >> 
    >> For Emacs 20, it says this:
    >> 
    >> To include a `-', write `-' as the first or last
    >> character of the character alternative, or put it
    >> after a range.  Thus, `[]-]' matches both `]' and
    >> `-'.

    tomas@tuxteam> Oh. That is interesting. Anyone knows why that change?

It makes the description and usage simpler and more regular, and less
error-prone.

Since I never remember the rules for this stuff anyway, I do this
instead:

(rx (or ?- ?+ ?.))
=> "[+.-]"

but of course parenthesis-like characters still need to be escaped:

(rx (or ?\) ?\] ?-))
=> "[])-]"

Robert
-- 

Re: [External] : Use the characters "+" and "-" in regular expressions

[tomas]

[-- Attachment #1: Type: text/plain, Size: 627 bytes --]

On Thu, May 20, 2021 at 09:59:59AM +0200, steve-humphreys@gmx.com wrote:
> I wonder why I am getting 
> 
> Symbol's value as variable is void: message

Because you are using it as a variable down there:
> 
> (message " ")
> (message "*** ***")
> (setq s (string-match "[+]+"  "++++++++++++++++"))
> message("%s" s)
  ^^^ HERE
> (setq s (string-match "[+-]+" "++++++++++++++++"))
> message("%s" s)
> (setq s (string-match "[+-]+" "----------------"))
> message("%s"  s)
  ^^^ AND HERE

Now *STOP*.

Think about it. How could you have debugged it yourself?

That's the only way to improve.

Cheers
 - t

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: [External] : Use the characters "+" and "-" in regular expressions

[steve-humphreys]

You are right.  Have got it now, thanks.

> Sent: Thursday, May 20, 2021 at 8:26 PM
> From: tomas@tuxteam.de
> To: steve-humphreys@gmx.com
> Cc: "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> Subject: Re: [External] :  Use the characters "+" and "-" in regular expressions
>
> On Thu, May 20, 2021 at 09:59:59AM +0200, steve-humphreys@gmx.com wrote:
> > I wonder why I am getting
> >
> > Symbol's value as variable is void: message
>
> Because you are using it as a variable down there:
> >
> > (message " ")
> > (message "*** ***")
> > (setq s (string-match "[+]+"  "++++++++++++++++"))
> > message("%s" s)
>   ^^^ HERE
> > (setq s (string-match "[+-]+" "++++++++++++++++"))
> > message("%s" s)
> > (setq s (string-match "[+-]+" "----------------"))
> > message("%s"  s)
>   ^^^ AND HERE
>
> Now *STOP*.
>
> Think about it. How could you have debugged it yourself?
>
> That's the only way to improve.
>
> Cheers
>  - t
>

[External] : Use the characters "+" and "-" in regular expressions

[steve-humphreys]

I have now used ";; [;+-.]+" to match some specific lines.

(string-match ";; [;+-.]+" s")

How could I negate the regexp that I have defined?

> Sent: Thursday, May 20, 2021 at 8:26 PM
> From: tomas@tuxteam.de
> To: steve-humphreys@gmx.com
> Cc: "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> Subject: Re: [External] :  Use the characters "+" and "-" in regular expressions
>
> On Thu, May 20, 2021 at 09:59:59AM +0200, steve-humphreys@gmx.com wrote:
> > I wonder why I am getting
> >
> > Symbol's value as variable is void: message
>
> Because you are using it as a variable down there:
> >
> > (message " ")
> > (message "*** ***")
> > (setq s (string-match "[+]+"  "++++++++++++++++"))
> > message("%s" s)
>   ^^^ HERE
> > (setq s (string-match "[+-]+" "++++++++++++++++"))
> > message("%s" s)
> > (setq s (string-match "[+-]+" "----------------"))
> > message("%s"  s)
>   ^^^ AND HERE
>
> Now *STOP*.
>
> Think about it. How could you have debugged it yourself?
>
> That's the only way to improve.
>
> Cheers
>  - t
>

Re: [External] : Use the characters "+" and "-" in regular expressions

[tomas]

[-- Attachment #1: Type: text/plain, Size: 742 bytes --]

On Thu, May 20, 2021 at 11:42:58AM +0200, steve-humphreys@gmx.com wrote:
> I have now used ";; [;+-.]+" to match some specific lines.
> 
> (string-match ";; [;+-.]+" s")
                       ^ NOOOO!

This is a dash in the middle, indicating a range (i.e. "match all
characters in the range "+" to "."). In ASCII (and by extension,
in UTF-8), these are "+", ",", "-" and ".".

So this will match...

  (string-match "[+-.]" "Folks, let's go!")
  => 5

... the comma!

This is the whole discussion we've had just yesterday and today.
I'm a bit confused: you seem to have ignored it totally.

> How could I negate the regexp that I have defined?

I don't even know what you mean by "negating a regexp".

Cheers
 - t

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: [External] : Use the characters "+" and "-" in regular expressions

[steve-humphreys]

> Sent: Thursday, May 20, 2021 at 9:56 PM
> From: tomas@tuxteam.de
> To: steve-humphreys@gmx.com
> Cc: "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> Subject: Re: [External] :  Use the characters "+" and "-" in regular expressions
>
> On Thu, May 20, 2021 at 11:42:58AM +0200, steve-humphreys@gmx.com wrote:
> > I have now used ";; [;+-.]+" to match some specific lines.
> >
> > (string-match ";; [;+-.]+" s")
>                        ^ NOOOO!
>
> This is a dash in the middle, indicating a range (i.e. "match all
> characters in the range "+" to "."). In ASCII (and by extension,
> in UTF-8), these are "+", ",", "-" and ".".

I thought it was only about numeric and letter ranges only.

> So this will match...
>
>   (string-match "[+-.]" "Folks, let's go!")
>   => 5
>
> ... the comma!
>
> This is the whole discussion we've had just yesterday and today.
> I'm a bit confused: you seem to have ignored it totally.
>
> > How could I negate the regexp that I have defined?
>
> I don't even know what you mean by "negating a regexp".
>
> Cheers
>  - t
>

Re: [External] : Use the characters "+" and "-" in regular expressions

[tomas]

[-- Attachment #1: Type: text/plain, Size: 1397 bytes --]

On Thu, May 20, 2021 at 12:11:49PM +0200, steve-humphreys@gmx.com wrote:
> 
> 
> > Sent: Thursday, May 20, 2021 at 9:56 PM
> > From: tomas@tuxteam.de
> > To: steve-humphreys@gmx.com
> > Cc: "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> > Subject: Re: [External] :  Use the characters "+" and "-" in regular expressions
> >
> > On Thu, May 20, 2021 at 11:42:58AM +0200, steve-humphreys@gmx.com wrote:
> > > I have now used ";; [;+-.]+" to match some specific lines.
> > >
> > > (string-match ";; [;+-.]+" s")
> >                        ^ NOOOO!
> >
> > This is a dash in the middle, indicating a range (i.e. "match all
> > characters in the range "+" to "."). In ASCII (and by extension,
> > in UTF-8), these are "+", ",", "-" and ".".
> 
> I thought it was only about numeric and letter ranges only.

No. Any characters can be the endpoints of a range. But this is
somewhat dangerous, since, strictly speaking, the results might
depend on the character encoding. Nowadays, with ubiquitous Unicode,
this is less of a problem. In the context of Emacs, which probably
always uses its internal set (a superset of Unicode), results are
probably always consistent.

That doesn't mean they are always intuitive. Quick: is "d" in
the range "[(-{]"?

Don't do that. Your reader will thank you.

Again: please, play with it. Make yourself test cases.

Cheers
 - t

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: [External] : Use the characters "+" and "-" in regular expressions

[steve-humphreys]

> Sent: Thursday, May 20, 2021 at 10:22 PM
> From: tomas@tuxteam.de
> To: steve-humphreys@gmx.com
> Cc: "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> Subject: Re: [External] :  Use the characters "+" and "-" in regular expressions
>
> On Thu, May 20, 2021 at 12:11:49PM +0200, steve-humphreys@gmx.com wrote:
> >
> >
> > > Sent: Thursday, May 20, 2021 at 9:56 PM
> > > From: tomas@tuxteam.de
> > > To: steve-humphreys@gmx.com
> > > Cc: "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> > > Subject: Re: [External] :  Use the characters "+" and "-" in regular expressions
> > >
> > > On Thu, May 20, 2021 at 11:42:58AM +0200, steve-humphreys@gmx.com wrote:
> > > > I have now used ";; [;+-.]+" to match some specific lines.
> > > >
> > > > (string-match ";; [;+-.]+" s")
> > >                        ^ NOOOO!
> > >
> > > This is a dash in the middle, indicating a range (i.e. "match all
> > > characters in the range "+" to "."). In ASCII (and by extension,
> > > in UTF-8), these are "+", ",", "-" and ".".
> >
> > I thought it was only about numeric and letter ranges only.
>
> No. Any characters can be the endpoints of a range. But this is
> somewhat dangerous, since, strictly speaking, the results might
> depend on the character encoding. Nowadays, with ubiquitous Unicode,
> this is less of a problem. In the context of Emacs, which probably
> always uses its internal set (a superset of Unicode), results are
> probably always consistent.
>
> That doesn't mean they are always intuitive. Quick: is "d" in
> the range "[(-{]"?
>
> Don't do that. Your reader will thank you.
>
> Again: please, play with it. Make yourself test cases.

Done some tests and got some strange results that thought would not match.  Then things
made more sense after your clarification because when I looked at some of the strings,
there was a comma in them.

Am seeing how to match strings of blank lines

But " +" does not do the job.  I know why, but how can one match strings of blanks?


> Cheers
>  - t
>

Re: [External] : Use the characters "+" and "-" in regular expressions

[tomas]

[-- Attachment #1: Type: text/plain, Size: 1465 bytes --]

On Thu, May 20, 2021 at 12:37:17PM +0200, steve-humphreys@gmx.com wrote:

[...]

> Done some tests and got some strange results that thought would not match.  Then things
> made more sense after your clarification because when I looked at some of the strings,
> there was a comma in them.

OK. Glad I could help.

> Am seeing how to match strings of blank lines

What is "a string of blank lines"?

I know strings of characters. But a line is not a character.

Do you mean "several blank lines next to each other"? I don't
think so. But what do you mean?

> But " +" does not do the job.

Again: you know by now that this will match "one or more spaces". Is
that for you a "string of blanks" (huh: where did you leave the
"line" from above?) or not?

>                  I know why, but how can one match strings of blanks?

To even have a chance to do that, you'll have to get hold of a more
or less precise idea of what "a string of blanks" is. This is work.

Begin with:

  (string-match " +" "A summer full of butterflies")
  => 1

Bingo: the first run of one-or-more spaces is at the position 1
(the first position in the string is 0, the "A"). So it's working
as it should.

So what is /your/ idea of "a string of blank lines" or "a string
of blanks"? Only you can find out.

If you feel you are stuck in that task, it sometimes help to collect
a couple of examples and counter-examples (they'll come in handy
when you try to test your attempts).

Cheers
 - t

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: [External] : Use the characters "+" and "-" in regular expressions

[steve-humphreys]

This is a string of blanks, a string composed of whitespace of any length.

"                     "



> Sent: Thursday, May 20, 2021 at 10:50 PM
> From: tomas@tuxteam.de
> To: steve-humphreys@gmx.com
> Cc: "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> Subject: Re: [External] :  Use the characters "+" and "-" in regular expressions
>
> On Thu, May 20, 2021 at 12:37:17PM +0200, steve-humphreys@gmx.com wrote:
>
> [...]
>
> > Done some tests and got some strange results that thought would not match.  Then things
> > made more sense after your clarification because when I looked at some of the strings,
> > there was a comma in them.
>
> OK. Glad I could help.
>
> > Am seeing how to match strings of blank lines
>
> What is "a string of blank lines"?
>
> I know strings of characters. But a line is not a character.
>
> Do you mean "several blank lines next to each other"? I don't
> think so. But what do you mean?
>
> > But " +" does not do the job.
>
> Again: you know by now that this will match "one or more spaces". Is
> that for you a "string of blanks" (huh: where did you leave the
> "line" from above?) or not?
>
> >                  I know why, but how can one match strings of blanks?
>
> To even have a chance to do that, you'll have to get hold of a more
> or less precise idea of what "a string of blanks" is. This is work.
>
> Begin with:
>
>   (string-match " +" "A summer full of butterflies")
>   => 1
>
> Bingo: the first run of one-or-more spaces is at the position 1
> (the first position in the string is 0, the "A"). So it's working
> as it should.
>
> So what is /your/ idea of "a string of blank lines" or "a string
> of blanks"? Only you can find out.
>
> If you feel you are stuck in that task, it sometimes help to collect
> a couple of examples and counter-examples (they'll come in handy
> when you try to test your attempts).
>
> Cheers
>  - t
>

[External] : Use the characters "+" and "-" in regular expressions

[steve-humphreys]

> This is a string of blanks, a string composed of whitespace of any length.
>
> "                     "

The above is what I meant, my gwx mail system is horse manure.


> Sent: Thursday, May 20, 2021 at 11:19 PM
> From: steve-humphreys@gmx.com
> To: tomas@tuxteam.de
> Cc: "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> Subject: Re: [External] :  Use the characters "+" and "-" in regular expressions
>
> This is a string of blanks, a string composed of whitespace of any length.
>
> "                     "
>
>
>
> > Sent: Thursday, May 20, 2021 at 10:50 PM
> > From: tomas@tuxteam.de
> > To: steve-humphreys@gmx.com
> > Cc: "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> > Subject: Re: [External] :  Use the characters "+" and "-" in regular expressions
> >
> > On Thu, May 20, 2021 at 12:37:17PM +0200, steve-humphreys@gmx.com wrote:
> >
> > [...]
> >
> > > Done some tests and got some strange results that thought would not match.  Then things
> > > made more sense after your clarification because when I looked at some of the strings,
> > > there was a comma in them.
> >
> > OK. Glad I could help.
> >
> > > Am seeing how to match strings of blank lines
> >
> > What is "a string of blank lines"?
> >
> > I know strings of characters. But a line is not a character.
> >
> > Do you mean "several blank lines next to each other"? I don't
> > think so. But what do you mean?
> >
> > > But " +" does not do the job.
> >
> > Again: you know by now that this will match "one or more spaces". Is
> > that for you a "string of blanks" (huh: where did you leave the
> > "line" from above?) or not?
> >
> > >                  I know why, but how can one match strings of blanks?
> >
> > To even have a chance to do that, you'll have to get hold of a more
> > or less precise idea of what "a string of blanks" is. This is work.
> >
> > Begin with:
> >
> >   (string-match " +" "A summer full of butterflies")
> >   => 1
> >
> > Bingo: the first run of one-or-more spaces is at the position 1
> > (the first position in the string is 0, the "A"). So it's working
> > as it should.
> >
> > So what is /your/ idea of "a string of blank lines" or "a string
> > of blanks"? Only you can find out.
> >
> > If you feel you are stuck in that task, it sometimes help to collect
> > a couple of examples and counter-examples (they'll come in handy
> > when you try to test your attempts).
> >
> > Cheers
> >  - t
> >
>
>

[External] : Use the characters "+" and "-" in regular expressions

[Christopher Dimech]

This could be what you need

  (string-match "[\s]+ " s)

Matches any white-space character.

> Sent: Thursday, May 20, 2021 at 11:19 PM
> From: steve-humphreys@gmx.com
> To: tomas@tuxteam.de
> Cc: "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> Subject: Re: [External] :  Use the characters "+" and "-" in regular expressions
>
> This is a string of blanks, a string composed of whitespace of any length.
>
> "                     "
>
>
>
> > Sent: Thursday, May 20, 2021 at 10:50 PM
> > From: tomas@tuxteam.de
> > To: steve-humphreys@gmx.com
> > Cc: "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> > Subject: Re: [External] :  Use the characters "+" and "-" in regular expressions
> >
> > On Thu, May 20, 2021 at 12:37:17PM +0200, steve-humphreys@gmx.com wrote:
> >
> > [...]
> >
> > > Done some tests and got some strange results that thought would not match.  Then things
> > > made more sense after your clarification because when I looked at some of the strings,
> > > there was a comma in them.
> >
> > OK. Glad I could help.
> >
> > > Am seeing how to match strings of blank lines
> >
> > What is "a string of blank lines"?
> >
> > I know strings of characters. But a line is not a character.
> >
> > Do you mean "several blank lines next to each other"? I don't
> > think so. But what do you mean?
> >
> > > But " +" does not do the job.
> >
> > Again: you know by now that this will match "one or more spaces". Is
> > that for you a "string of blanks" (huh: where did you leave the
> > "line" from above?) or not?
> >
> > >                  I know why, but how can one match strings of blanks?
> >
> > To even have a chance to do that, you'll have to get hold of a more
> > or less precise idea of what "a string of blanks" is. This is work.
> >
> > Begin with:
> >
> >   (string-match " +" "A summer full of butterflies")
> >   => 1
> >
> > Bingo: the first run of one-or-more spaces is at the position 1
> > (the first position in the string is 0, the "A"). So it's working
> > as it should.
> >
> > So what is /your/ idea of "a string of blank lines" or "a string
> > of blanks"? Only you can find out.
> >
> > If you feel you are stuck in that task, it sometimes help to collect
> > a couple of examples and counter-examples (they'll come in handy
> > when you try to test your attempts).
> >
> > Cheers
> >  - t
> >
>
>

[External] : Use the characters "+" and "-" in regular expressions

[steve-humphreys]

> Sent: Thursday, May 20, 2021 at 11:31 PM
> From: "Christopher Dimech" <dimech@gmx.com>
> To: steve-humphreys@gmx.com
> Cc: "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> Subject: [External] :  Use the characters "+" and "-" in regular expressions
>
> This could be what you need
>
>   (string-match "[\s]+ " s)
>
> Matches any white-space character.

That would actually match a sentence, which I don't want.

What I like to match is a string composed only of whitespace.

> > Sent: Thursday, May 20, 2021 at 11:19 PM
> > From: steve-humphreys@gmx.com
> > To: tomas@tuxteam.de
> > Cc: "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> > Subject: Re: [External] :  Use the characters "+" and "-" in regular expressions
> >
> > This is a string of blanks, a string composed of whitespace of any length.
> >
> > "                     "
> >
> >
> >
> > > Sent: Thursday, May 20, 2021 at 10:50 PM
> > > From: tomas@tuxteam.de
> > > To: steve-humphreys@gmx.com
> > > Cc: "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> > > Subject: Re: [External] :  Use the characters "+" and "-" in regular expressions
> > >
> > > On Thu, May 20, 2021 at 12:37:17PM +0200, steve-humphreys@gmx.com wrote:
> > >
> > > [...]
> > >
> > > > Done some tests and got some strange results that thought would not match.  Then things
> > > > made more sense after your clarification because when I looked at some of the strings,
> > > > there was a comma in them.
> > >
> > > OK. Glad I could help.
> > >
> > > > Am seeing how to match strings of blank lines
> > >
> > > What is "a string of blank lines"?
> > >
> > > I know strings of characters. But a line is not a character.
> > >
> > > Do you mean "several blank lines next to each other"? I don't
> > > think so. But what do you mean?
> > >
> > > > But " +" does not do the job.
> > >
> > > Again: you know by now that this will match "one or more spaces". Is
> > > that for you a "string of blanks" (huh: where did you leave the
> > > "line" from above?) or not?
> > >
> > > >                  I know why, but how can one match strings of blanks?
> > >
> > > To even have a chance to do that, you'll have to get hold of a more
> > > or less precise idea of what "a string of blanks" is. This is work.
> > >
> > > Begin with:
> > >
> > >   (string-match " +" "A summer full of butterflies")
> > >   => 1
> > >
> > > Bingo: the first run of one-or-more spaces is at the position 1
> > > (the first position in the string is 0, the "A"). So it's working
> > > as it should.
> > >
> > > So what is /your/ idea of "a string of blank lines" or "a string
> > > of blanks"? Only you can find out.
> > >
> > > If you feel you are stuck in that task, it sometimes help to collect
> > > a couple of examples and counter-examples (they'll come in handy
> > > when you try to test your attempts).
> > >
> > > Cheers
> > >  - t
> > >
> >
> >
>
>

[External] : Use the characters "+" and "-" in regular expressions

[Christopher Dimech]

Try this one instead, which should match strings containing 0 or more whitespace characters.

(string-match "^[\s]*$" s)


> Sent: Thursday, May 20, 2021 at 11:40 PM
> From: steve-humphreys@gmx.com
> To: "Christopher Dimech" <dimech@gmx.com>
> Cc: "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> Subject: [External] :  Use the characters "+" and "-" in regular expressions
>
>
>
> > Sent: Thursday, May 20, 2021 at 11:31 PM
> > From: "Christopher Dimech" <dimech@gmx.com>
> > To: steve-humphreys@gmx.com
> > Cc: "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> > Subject: [External] :  Use the characters "+" and "-" in regular expressions
> >
> > This could be what you need
> >
> >   (string-match "[\s]+ " s)
> >
> > Matches any white-space character.
>
> That would actually match a sentence, which I don't want.
>
> What I like to match is a string composed only of whitespace.
>
> > > Sent: Thursday, May 20, 2021 at 11:19 PM
> > > From: steve-humphreys@gmx.com
> > > To: tomas@tuxteam.de
> > > Cc: "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> > > Subject: Re: [External] :  Use the characters "+" and "-" in regular expressions
> > >
> > > This is a string of blanks, a string composed of whitespace of any length.
> > >
> > > "                     "
> > >
> > >
> > >
> > > > Sent: Thursday, May 20, 2021 at 10:50 PM
> > > > From: tomas@tuxteam.de
> > > > To: steve-humphreys@gmx.com
> > > > Cc: "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> > > > Subject: Re: [External] :  Use the characters "+" and "-" in regular expressions
> > > >
> > > > On Thu, May 20, 2021 at 12:37:17PM +0200, steve-humphreys@gmx.com wrote:
> > > >
> > > > [...]
> > > >
> > > > > Done some tests and got some strange results that thought would not match.  Then things
> > > > > made more sense after your clarification because when I looked at some of the strings,
> > > > > there was a comma in them.
> > > >
> > > > OK. Glad I could help.
> > > >
> > > > > Am seeing how to match strings of blank lines
> > > >
> > > > What is "a string of blank lines"?
> > > >
> > > > I know strings of characters. But a line is not a character.
> > > >
> > > > Do you mean "several blank lines next to each other"? I don't
> > > > think so. But what do you mean?
> > > >
> > > > > But " +" does not do the job.
> > > >
> > > > Again: you know by now that this will match "one or more spaces". Is
> > > > that for you a "string of blanks" (huh: where did you leave the
> > > > "line" from above?) or not?
> > > >
> > > > >                  I know why, but how can one match strings of blanks?
> > > >
> > > > To even have a chance to do that, you'll have to get hold of a more
> > > > or less precise idea of what "a string of blanks" is. This is work.
> > > >
> > > > Begin with:
> > > >
> > > >   (string-match " +" "A summer full of butterflies")
> > > >   => 1
> > > >
> > > > Bingo: the first run of one-or-more spaces is at the position 1
> > > > (the first position in the string is 0, the "A"). So it's working
> > > > as it should.
> > > >
> > > > So what is /your/ idea of "a string of blank lines" or "a string
> > > > of blanks"? Only you can find out.
> > > >
> > > > If you feel you are stuck in that task, it sometimes help to collect
> > > > a couple of examples and counter-examples (they'll come in handy
> > > > when you try to test your attempts).
> > > >
> > > > Cheers
> > > >  - t
> > > >
> > >
> > >
> >
> >
>
>

Re: [External] : Use the characters "+" and "-" in regular expressions

[tomas]

[-- Attachment #1: Type: text/plain, Size: 658 bytes --]

On Thu, May 20, 2021 at 01:31:22PM +0200, Christopher Dimech wrote:
> This could be what you need
> 
>   (string-match "[\s]+ " s)

You know that you can say " " instead of "\s", right? This is because,
in string literal syntax, "\s" is special and replaced by a space
(analog to "\n", "\r" and friends). This has nothing to do with
regexps: the regexp engine gets to see the " ".

So it's the same as "[ ]+ ".

This is a row of one or more spaces, followed by a space -- which is
the same as a row of two or more spaces, which can be also written
" \\{2\\}" (remember: one backslash for the Lisp string, one for the
regexp).

Cheers
 - t

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: [External] : Use the characters "+" and "-" in regular expressions

[tomas]

[-- Attachment #1: Type: text/plain, Size: 543 bytes --]

On Thu, May 20, 2021 at 01:27:19PM +0200, steve-humphreys@gmx.com wrote:
> > This is a string of blanks, a string composed of whitespace of any length.
> >
> > "                     "
> 
> The above is what I meant, my gwx mail system is horse manure.

Exactly 21 spaces? (I don't think so). Does one space count? Two?

Context: Do you want to find the "   " after the "a" in the following
example: "This is a   sentence with holes"? What about the single " "
after "This"?

Still some thinking for you to do :-)

Cheers
 - t

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: [External] : Use the characters "+" and "-" in regular expressions

[Jean Louis]

* steve-humphreys@gmx.com <steve-humphreys@gmx.com> [2021-05-20 12:43]:
> I have now used ";; [;+-.]+" to match some specific lines.
> 
> (string-match ";; [;+-.]+" s")
> 
> How could I negate the regexp that I have defined?

Why not use not?


-- 
Jean

Take action in Free Software Foundation campaigns:
https://www.fsf.org/campaigns

Sign an open letter in support of Richard M. Stallman
https://stallmansupport.org/
https://rms-support-letter.github.io/

Re: [External] : Use the characters "+" and "-" in regular expressions

[Jean Louis]

* steve-humphreys@gmx.com <steve-humphreys@gmx.com> [2021-05-20 13:41]:
> Am seeing how to match strings of blank lines
> 
> But " +" does not do the job.  I know why, but how can one match strings of blanks?

[:blank:] is series of characters for that:

(string-match "[[:blank:]]" " ") ⇒ 0

Match new lines as blanks:

(string-match "[[:blank:]]" " 

") ⇒ 0

There can be many various spaces, like EM SPACE: " "

Thus this will not work on EM SPACE:

(string-match " +" " ") ⇒ nil

But this will work:
(string-match "[[:blank:]]" " ") ⇒ 0


-- 
Jean

Take action in Free Software Foundation campaigns:
https://www.fsf.org/campaigns

Sign an open letter in support of Richard M. Stallman
https://stallmansupport.org/
https://rms-support-letter.github.io/

Re: [External] : Use the characters "+" and "-" in regular expressions

[Jean Louis]

* Christopher Dimech <dimech@gmx.com> [2021-05-20 14:32]:
> This could be what you need
> 
>   (string-match "[\s]+ " s)
> 
> Matches any white-space character.

Why space after plus?

From manual:

"Whitespace characters such as space, tab, newline and formfeed..."

So this does not match new line:

(string-match "[\s]+" "
") ⇒ nil

Neither TAB or FORM FEED:
(string-match "[\s]+" "	") ⇒ nil

(string-match "[\s]+" "\f") ⇒ nil



-- 
Jean

Take action in Free Software Foundation campaigns:
https://www.fsf.org/campaigns

Sign an open letter in support of Richard M. Stallman
https://stallmansupport.org/
https://rms-support-letter.github.io/

Re: [External] : Use the characters "+" and "-" in regular expressions

[Jean Louis]

* steve-humphreys@gmx.com <steve-humphreys@gmx.com> [2021-05-20 14:41]:
> >   (string-match "[\s]+ " s)
> >
> > Matches any white-space character.
> 
> That would actually match a sentence, which I don't want.
> 
> What I like to match is a string composed only of whitespace.

Did we not discuss it recently? 

This is how you can make negative match:

(not (string-match "[^[:blank:]]" " ")) ⇒ t

But if there is anything inside that is not blank character, it will
not match:

(not (string-match "[^[:blank:]]" "                j")) ⇒ nil



-- 
Jean

Take action in Free Software Foundation campaigns:
https://www.fsf.org/campaigns

Sign an open letter in support of Richard M. Stallman
https://stallmansupport.org/
https://rms-support-letter.github.io/

Re: [External] : Use the characters "+" and "-" in regular expressions

[steve-humphreys]

> Sent: Friday, May 21, 2021 at 12:46 AM
> From: "Jean Louis" <bugs@gnu.support>
> To: steve-humphreys@gmx.com
> Cc: "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> Subject: Re: [External] :  Use the characters "+" and "-" in regular expressions
>
> * steve-humphreys@gmx.com <steve-humphreys@gmx.com> [2021-05-20 13:41]:
> > Am seeing how to match strings of blank lines
> > 
> > But " +" does not do the job.  I know why, but how can one match strings of blanks?
> 
> [:blank:] is series of characters for that:
> 
> (string-match "[[:blank:]]" " ") ⇒ 0

Have done the following  (string-match "^[:blank:]$" s)

Because (string-match "[:blank:]" s) was matching sentences with space between words as well.


> Match new lines as blanks:
> 
> (string-match "[[:blank:]]" " 
> 
> ") ⇒ 0
> 
> There can be many various spaces, like EM SPACE: " "
> 
> Thus this will not work on EM SPACE:
> 
> (string-match " +" " ") ⇒ nil
> 
> But this will work:
> (string-match "[[:blank:]]" " ") ⇒ 0
> 
> 
> -- 
> Jean
> 
> Take action in Free Software Foundation campaigns:
> https://www.fsf.org/campaigns
> 
> Sign an open letter in support of Richard M. Stallman
> https://stallmansupport.org/
> https://rms-support-letter.github.io/
> 
> 
>

Re: [External] : Use the characters "+" and "-" in regular expressions

[Jean Louis]

* steve-humphreys@gmx.com <steve-humphreys@gmx.com> [2021-05-20 16:56]:

> > [:blank:] is series of characters for that:
> > 
> > (string-match "[[:blank:]]" " ") ⇒ 0
> 
> Have done the following  (string-match "^[:blank:]$" " ")
> 
> Because (string-match "[:blank:]" s) was matching sentences with
> space between words as well.

Are you sure? As in that case the meaning of ^ is that it matches
begin of line, while in [^[:blank:]] it match anything but non-blank
and meaning of ^ is "not match" in that case.



-- 
Jean

Take action in Free Software Foundation campaigns:
https://www.fsf.org/campaigns

Sign an open letter in support of Richard M. Stallman
https://stallmansupport.org/
https://rms-support-letter.github.io/

Re: [External] : Use the characters "+" and "-" in regular expressions

[steve-humphreys]

> Sent: Friday, May 21, 2021 at 2:14 AM
> From: "Jean Louis" <bugs@gnu.support>
> To: steve-humphreys@gmx.com
> Cc: "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> Subject: Re: [External] :  Use the characters "+" and "-" in regular expressions
>
> * steve-humphreys@gmx.com <steve-humphreys@gmx.com> [2021-05-20 16:56]:
> 
> > > [:blank:] is series of characters for that:
> > > 
> > > (string-match "[[:blank:]]" " ") ⇒ 0
> > 
> > Have done the following  (string-match "^[:blank:]$" " ")
> > 
> > Because (string-match "[:blank:]" s) was matching sentences with
> > space between words as well.
> 
> Are you sure? As in that case the meaning of ^ is that it matches
> begin of line, while in [^[:blank:]] it match anything but non-blank
> and meaning of ^ is "not match" in that case.

I have settled with

  (string-match "^[:blank:]*$" s)

This would match only strings with spaces, not sentences with spaces.  What do you think?


 
> 
> -- 
> Jean
> 
> Take action in Free Software Foundation campaigns:
> https://www.fsf.org/campaigns
> 
> Sign an open letter in support of Richard M. Stallman
> https://stallmansupport.org/
> https://rms-support-letter.github.io/
> 
> 
>

Re: [External] : Use the characters "+" and "-" in regular expressions

[Yuri Khan]

On Thu, 20 May 2021 at 21:50, <steve-humphreys@gmx.com> wrote:

> I have settled with
>
>   (string-match "^[:blank:]*$" s)
>
> This would match only strings with spaces, not sentences with spaces.  What do you think?

No, that will match lines consisting of colons and letters a, b, k, l,
and n. To use a named character class, you need double brackets.

[External] : Use the characters "+" and "-" in regular expressions

[steve-humphreys]

> Sent: Friday, May 21, 2021 at 4:24 AM
> From: "Yuri Khan" <yuri.v.khan@gmail.com>
> To: steve-humphreys@gmx.com
> Cc: "Jean Louis" <bugs@gnu.support>, "help-gnu-emacs@gnu.org" <help-gnu-emacs@gnu.org>
> Subject: Re: [External] : Use the characters "+" and "-" in regular expressions
>
> On Thu, 20 May 2021 at 21:50, <steve-humphreys@gmx.com> wrote:
>
> > I have settled with
> >
> >   (string-match "^[:blank:]*$" s)
> >
> > This would match only strings with spaces, not sentences with spaces.  What do you think?
>
> No, that will match lines consisting of colons and letters a, b, k, l,
> and n. To use a named character class, you need double brackets.

Like this then

(string-match "^[[:blank:]]*$" s)

Re: [External] : Use the characters "+" and "-" in regular expressions

[Eduardo Ochs]

Btw, my favorite way to not have to remember all these, ahem, corner
cases, is to put comments like these near my uglier sexps:

;; (info "(elisp)Rx Constructs")
;; (rx (any "[]") (one-or-more "=") (any "[]"))

On Thu, 20 May 2021 at 13:35, <steve-humphreys@gmx.com> wrote:
> ...

RE: [External] : Use the characters "+" and "-" in regular expressions

[Drew Adams]

> Btw, my favorite way to not have to remember all these, ahem, corner
> cases, is to put comments like these near my uglier sexps:
> 
> ;; (info "(elisp)Rx Constructs")
> ;; (rx (any "[]") (one-or-more "=") (any "[]"))

I do the same (e.g., the latter comment).

IOW, I use RX to double-check or sometimes to create a regexp.

Re: [External] : Use the characters "+" and "-" in regular expressions

[Jean Louis]

* steve-humphreys@gmx.com <steve-humphreys@gmx.com> [2021-05-20 17:28]:
> I have settled with
> 
>   (string-match "^[:blank:]*$" s)
> 
> This would match only strings with spaces, not sentences with
> spaces.  What do you think?

That one is good to match nothing:

(string-match "^[:blank:]*$" "") ⇒ 0

(string-match "^[:blank:]*$" " ") ⇒ nil

(string-match "^[:blank:]*$" "  ") ⇒ nil

You have to read the manual: (info "(elisp) Regular Expressions")

-- 
Jean

Take action in Free Software Foundation campaigns:
https://www.fsf.org/campaigns

Sign an open letter in support of Richard M. Stallman
https://stallmansupport.org/
https://rms-support-letter.github.io/