unofficial mirror of help-gnu-emacs@gnu.org
 help / color / mirror / Atom feed
* Non-startup auto-reminder from calendar?
@ 2002-11-08 18:31 Christopher Balz
  2002-11-09  0:11 ` Kevin Rodgers
  2002-11-09 23:39 ` Edward M. Reingold
  0 siblings, 2 replies; 4+ messages in thread
From: Christopher Balz @ 2002-11-08 18:31 UTC (permalink / raw)


When Emacs is started up, it of course displays any calendar (.diary)
entries.

Since I usually just hibernate my machine (thank goodness I don't
start up a lot since I use iswitch and eieio with a large desktop of
buffers), the above feature isn't of much use to me.  What is needed,
I'm sure by more people than just myself, is an Emacs calendar feature
that will display the day's goings-on say at 9:00 a.m. daily.

I'd be very surprised if this feature did not yet exist.  But if this
feature in fact does not exist, I would be interested in working on
it, if I could be pointed at the right Lisp functions.

Thank you in advance!

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: Non-startup auto-reminder from calendar?
  2002-11-08 18:31 Non-startup auto-reminder from calendar? Christopher Balz
@ 2002-11-09  0:11 ` Kevin Rodgers
  2002-11-09 23:39 ` Edward M. Reingold
  1 sibling, 0 replies; 4+ messages in thread
From: Kevin Rodgers @ 2002-11-09  0:11 UTC (permalink / raw)


Christopher Balz wrote:

> When Emacs is started up, it of course displays any calendar (.diary)
> entries.
> 
> Since I usually just hibernate my machine (thank goodness I don't
> start up a lot since I use iswitch and eieio with a large desktop of
> buffers), the above feature isn't of much use to me.  What is needed,
> I'm sure by more people than just myself, is an Emacs calendar feature
> that will display the day's goings-on say at 9:00 a.m. daily.

File: emacs,  Node: Appointments,  Next: Daylight Savings,  Prev: Diary,  Up: 
Calendar/Diary

Appointments
============

    If you have a diary entry for an appointment, and that diary entry
begins with a recognizable time of day, Emacs can warn you, several
minutes beforehand, that that appointment is pending.  Emacs alerts you
to the appointment by displaying a message in the mode line.

    To enable appointment notification, you must enable the time display
feature of Emacs, `M-x display-time' (*note Mode Line::.).  You must
also add the function `appt-make-list' to the `diary-hook', like this:

      (add-hook 'diary-hook 'appt-make-list)

...

    Emacs updates the appointments list automatically just after
midnight.  This also displays the next day's diary entries in the diary
buffer, unless you set `appt-display-diary' to `nil'.


-- 
<a href="mailto:&lt;kevin.rodgers&#64;ihs.com&gt;">Kevin Rodgers</a>

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: Non-startup auto-reminder from calendar?
  2002-11-08 18:31 Non-startup auto-reminder from calendar? Christopher Balz
  2002-11-09  0:11 ` Kevin Rodgers
@ 2002-11-09 23:39 ` Edward M. Reingold
  2002-11-15 17:48   ` Christopher Balz
  1 sibling, 1 reply; 4+ messages in thread
From: Edward M. Reingold @ 2002-11-09 23:39 UTC (permalink / raw)


>>>>> "CB" == Christopher Balz <ChristopherBalz@yahoo.com> writes:

    CB> buffers), the above feature isn't of much use to me.  What is needed,
    CB> I'm sure by more people than just myself, is an Emacs calendar feature
    CB> that will display the day's goings-on say at 9:00 a.m. daily.

Here is how I do it (at midnight):

(require 'midnight)
(setq midnight-delay 1)

(defun update-my-calendar ()
  (let ((diary-buffer (get-file-buffer diary-file))
        (number-of-diary-entries 30))
    (if diary-buffer
        (progn
          (set-buffer diary-buffer)
          (revert-buffer t t)))
    (calendar)))

(add-hook 'midnight-hook 'update-my-calendar)


-- 

Professor Edward M. Reingold                Email: reingold@iit.edu
Chairman, Department of Computer Science    Voice: (312) 567-3309
Illinois Institute of Technology            Assistant: (312) 567-5152
Stuart Building                             Fax:   (312) 567-5067
10 West 31st Street, Suite 236
Chicago, IL  60616-3729  U.S.A.

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: Non-startup auto-reminder from calendar?
  2002-11-09 23:39 ` Edward M. Reingold
@ 2002-11-15 17:48   ` Christopher Balz
  0 siblings, 0 replies; 4+ messages in thread
From: Christopher Balz @ 2002-11-15 17:48 UTC (permalink / raw)


Thank you both for the help.  However, I still cannot get effective,
automatic execution of the diary reading, which is required to set the
automatic display of appointment notifications.

I hibernate my computer at midnight, so Emacs does not have a chance
to run the midnight function at midnight.  I tried setting the time
delay on the midnight function to delay to a time when my computer is
usually on (9:00 a.m.), and made sure to set and save the option for
now and future sessions (even reloaded .emacs into a buffer and eval'd
it), but no luck.  It seemed like the update-my-calendar function is
nice, so I put that in and used the customize feature to hook it in.
I've learned to just use the Customize Utility whenever possible.

Anyhow, just search on 'diary' and 'midnight' below and you will see
the relevant code.  It seems like if I can just get the midnight
function to run when my machine is actually on, there will be a
functional appointment reminder utility.

Thank you in advance.
 - CB

;; This is a web programmer's .emacs file for GNU Emacs.
;; It has been tested on GNU Emacs version 21.2.1 on Windows 2000, 
;; Service Pack 3.	 
;;
;; The GNU Emacs Homepage is located at: 
;;             http://www.gnu.org/directory/GNU/emacs.html
;;
;; This Document Last Modified: 11/05/2002.
;;
;; Portability: It would take minimal or no changes to port it to run
on Unix;
;; the one major change definitely needed would be to remove the
"cygwin"-related
;; code, since that is only for putting the BASH shell on Windows.
;;
;; @author: Christopher M. Balz.
;;          Feel free to e-mail me regarding this file at any of the
addresses below:
;;          ChristopherBalz@yahoo.com
;;          ChristopherMBalz@StanfordAlumni.org

;; General Notes:  It is often said that a new Emacs user should stay
away from old, crusty
;;                 '.emacs' files from others.  However, the only way
that I ever was able
;;                 to get a reasonable return on the investment of my
time put into setting
;;                 up my Emacs configurations was by borrowing code
snippets from others.
;;                 It is true that no '.emacs' file should be used
uncritically, by newbie or
;;                 by others.  
;;               
;;                 However, for the best user base, new users should
be able to
;;                 fairly easily clip out sections of '.emacs' files
that interest them and put
;;                 them to use right away in their own '.emacs' files.
 To this end, I have
;;                 attempted to effectively segment the various
independent components of this
;;                 '.emacs' file and have documented what I have done
as clearly as possible.
;;                 It's very exciting how Emacs modes related to
software engineering for the
;;                 web are maturing.  
;;     

;; ------------   Invocation of Gnu Emacs on Win2K: 
;;
;;    From Windows shortcut icon with these properties on shortcut's
'Properties' menu:
;;        'Target': 
;;           "C:\Program Files\emacs\emacs-21.2\bin\runemacs.exe" -l
~/.emacs
;;         'Start in' (Note: I use Cygwin, see below):
;;           C:/cygwin/home/Administrator/
;;
;;    Set user-specific 'HOME' environment variable to
'C:/cygwin/home/Administrator', which is
;;    the directory in which my '.emacs' file is located.  Do this by
going to the Control Panel,
;;    then to 'System', then to 'Advanced', then to 'Environment
Variables', the to 'Variables
;;    for <user>'. 

;; ------------  Commense lisping:

;; Add the site directory (the site directory is used to contain
non-core Emacs Lisp packages)
;; to the Emacs load-path.  The Emacs load-path is 
;; the list of directories where Emacs searches for packages that you
require.
;; This must be at the head of your .emacs file.  This code prepends
the site directory to the load path:
;; Standard emacs lisp access (for non-byte-compiled access):
(add-to-list 'load-path (expand-file-name "C:/Program
Files/emacs/emacs-21.2/site-lisp/"))
(add-to-list 'load-path (expand-file-name "C:/Program
Files/emacs/emacs-21.2/site/lisp/progmodes/"))
;; System-wide emacs customizations:
(add-to-list 'load-path (expand-file-name "C:/Program
Files/emacs/site/"))
;; Personal emacs/site:
(add-to-list 'load-path (expand-file-name "~/emacs/site/")) 
;; So that Emacs can find the home directory files (desktop, etc.):
(add-to-list 'load-path (expand-file-name "~/")) 
;; Specific Packages:
(add-to-list 'load-path (expand-file-name "C:/Program
Files/emacs/site/eieio-0.16/"))
(add-to-list 'load-path (expand-file-name "C:/Program
Files/emacs/site/semantic-1.4beta14/"))
(add-to-list 'load-path (expand-file-name "C:/Program
Files/emacs/site/speedbar-0.14beta3/"))
(add-to-list 'load-path (expand-file-name "C:/Program
Files/emacs/site/elib-1.0/"))
(add-to-list 'load-path (expand-file-name "C:/Program
Files/emacs/site/psgml-1.2.5/"))
;;        For Emacs JDE (from http://sunsite.dk/jde/):
(add-to-list 'load-path (expand-file-name "C:/Program
Files/emacs/site/jde-2.2.8/lisp/"))

;; On Windows 2000, it is sufficient to set the user-specific 'HOME'
environment
;; variable (see above) to the path to your .emacs file.  For example,
mine goes to:
;; 'C:/cygwin/home/Administrator'.  Most other systems should have a 
;; reasonably sane approach to doing this.  These approaches are best.
;; However, if on some other system you have
;; trouble saving your customizations (meaning, the customizations
possible
;; through the command ESC-x customize-group, and meaning, the error
message
;; 'saving settings from 'emacs -q' would overwrite customizations'),
;; explicitly assigning the 'user-init-file' variable is a sure-fire
way
;; to avoid the problem:
;; (setq user-init-file (expand-file-name "~/.emacs")
;;        custom-file (expand-file-name "~/.emacs"))


;; For use of Bash shell via Cygwin on Windows 2000 (or NT), available
from:
;;	     http://www.cygwin.com/
;; (if you do not have Cygwin installed, comment all of this section
out).
	;; This assumes that Cygwin is installed in C:\cygwin (the
	;; default) and that C:\cygwin\bin is not already in your
	;; Windows Path (it generally should not be).
        ;;
	(setq exec-path (cons "C:/cygwin/bin" exec-path))
	(setenv "PATH" (concat "C:\\cygwin\\bin;" (getenv "PATH")))
	;;
	;; NT-emacs assumes a Windows command shell, which you change
	;; here.
	;;
	(setq process-coding-system-alist '(("bash" . undecided-unix)))
	(setq w32-quote-process-args ?\")
	(setq shell-file-name "bash")
	(setenv "SHELL" shell-file-name) 
	(setq explicit-shell-file-name shell-file-name) 
;; End of bash shell use via Cygwin section.

;; This removes unsightly ^M characters that would otherwise
;; appear in the output of java applications.
;;
(add-hook 'comint-output-filter-functions
	  'comint-strip-ctrl-m)

;; Set start-up directory with cygwin nomenclature 
;; (your configuration files _must_ be in this directory):
(setq startup-directory "C:/cygwin/home/Administrator/")

;; generic-x.el is a standard package with Emacs 21.  It contains some
;; very neat little modes, such as a JavaScript mode (but said mode
;; is not yet as good as c-mode for JavaScript, for it does not 
;; recognize /*-style comments.
;; All modes supported by generic-x.el are automatically applied
;; unless overridden below (for example, JavaScript mode is overridden
;; below).
(require 'generic-x)

;; -------- JDE is the Java IDE for Emacs.
(require 'jde)
;; Use no tabs when editing Java for cross-editor indentation
compatibility.
(defun my-jde-indent-setup ()
  (setq indent-tabs-mode nil)
  (setq jde-basic-offset 4))
;;
;; Add the above hook to the jde-mode.
(add-hook 'jde-mode-hook 'my-jde-indent-setup)


;; -------- Begin w3m Section (HTML browser) 
(autoload 'w3m "w3m" "Interface for w3m on Emacs." t)
(autoload 'w3m-find-file "w3m" "w3m interface function for local
file." t)
(autoload 'w3m-browse-url "w3m" "Ask a WWW browser to show a URL." t)
(autoload 'w3m-search "w3m-search" "Search QUERY using SEARCH-ENGINE."
t)
(autoload 'w3m-weather "w3m-weather" "Display weather report." t)
(autoload 'w3m-antenna "w3m-antenna" "Report change of WEB sites." t)
;; -------- End w3m Section (HTML browser) 

;; -------- Begin JavaScript editing section. -------- 

;; This is my way of loading c-mode and hooking .js files to it, 
;; not superseded by the JavaScript mode in generic-x.el (see above).
(autoload 'c-mode "cc-mode.el")
(setq auto-mode-alist (cons '("\\.js$" . c-mode) auto-mode-alist))
;; This is the container for my custom js editing mode  
;; It uses no tabs for cross-editor compatibility.
(defun my-js-indent-setup ()
  (setq indent-tabs-mode nil)
  (setq c-basic-offset 4))
;;
;; Add the above hook to the c-mode.
(add-hook 'c-mode-hook 'my-js-indent-setup)

;; -------- End JavaScript editing section. -------- 


;; -------- Begin XML and SGML Editing Section --------  
;;
;; -> Note: this handles HTML also but 
;; a formal DTD declaration is needed for that.  Instead, I use
;; html-helper-mode, which handles embedded scripts as well.
;; -> From: http://www.lysator.liu.se/~lenst/about_psgml/
;; -> Environment Variable Must be set for dtd feature to work:
;; PSGML needs to know where to find the SGML catalog files. There are
a couple
;;  of ways to accomplish this, as described in the PSGML
documentation. I use the method
;;  that makes use of the environment variable SGML_CATALOG_FILES
because it is
;;  also used by the SGML parser (patience, I come to it in the next
section of this article).
;;  So, now that you have a set of DTDs and a catalog file, create the
afore-mentioned
;; environment variable and set it to include the path to your
xhtml1.soc file, for
;; example d:\DTDs\xhtml1\xhtml1.soc. If you have more that one
catalog file,
;; you can include them all, separating them with a path delimiter
(";" on Windows,
;; ":" on UNIX-based systems).
;; Here is my value: c:\Program
Files\dtds\xhtml1\xhtml1.soc;c:\Program
Files\dtds\hodmacro\hodmacro.soc

(require 'sgml-mode "psgml.el" "Major mode to edit SGML files.")
(autoload 'xml-mode "psgml.el" "Major mode to edit XML." t)
(setq auto-mode-alist 
      (append '(
		("\\.sgml$" . sgml-mode)
		("\\.idd$" . sgml-mode)
		("\\.ide$" . sgml-mode)
		("\\.xml$" . xml-mode)
		("\\.xsl$" . xml-mode)
		("\\.fo$" . xml-mode)
		)
	      auto-mode-alist
	      )
      )

; Auto-activate parsing the DTD when a document is loaded.
; If this isn't enabled, syntax coloring won't take affect until
; you manually invoke "DTD->Parse DTD"
(setq sgml-auto-activate-dtd t)

;;; Set up my "DTD->Insert DTD" menu.

(setq sgml-custom-dtd '
      (
       ( "DITA concept"
	 "<?xml version=\"1.0\"?>\n<!DOCTYPE concept SYSTEM \"concept.dtd\">"
)
       ( "DITA task"
	 "<?xml version=\"1.0\"?>\n<!DOCTYPE task SYSTEM \"task.dtd\">" )
       ( "DITA reftopic"
	 "<?xml version=\"1.0\"?>\n<!DOCTYPE reftopic SYSTEM
\"reftopic.dtd\">" )
       ( "DITA APIdesc"
	 "<?xml version=\"1.0\"?>\n<!DOCTYPE APIdesc SYSTEM \"apidesc.dtd\">"
)
       ( "DITA topic"
	 "<?xml version=\"1.0\"?>\n<!DOCTYPE topic SYSTEM \"ditabase.dtd\">"
)
       ( "HOD Script"
	 "<?xml version=\"1.0\"?>\n<!DOCTYPE HASCRIPT SYSTEM
\"HAScript.dtd\">" )
       ( "XHTML 1.0 Strict"
	 "<?xml version=\"1.0\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML
1.0 Strict//EN\" \"xhtml1-strict.dtd\">" )
       ( "XHTML 1.0 Transitional"
	 "<?xml version=\"1.0\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML
1.0 Transitional//EN\" \"xhtml1-transitional.dtd\">" )
       ( "XHTML 1.0 Frameset"
	 "<?xml version=\"1.0\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML
1.0 Frameset//EN\" \"xhtml1-frameset.dtd\">" )
       ( "HTML 4.01 Transitional"
	 "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01 Transitional//EN\">"
)
       ( "HTML 4.01 Strict"
	 "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01//EN\">" )
       ( "HTML 4.01 Frameset"
	 "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01 Frameset//EN\">" )
       ( "IBMIDDoc"
	 "<!DOCTYPE ibmiddoc PUBLIC \"+//ISBN 0-933186::IBM//DTD
IBMIDDoc//EN\" [\n]>")
       ( "DOCBOOK XML 4.1.2"
	 "<?xml version=\"1.0\"?>\n<!DOCTYPE book PUBLIC \"-//OASIS//DTD
DocBook XML V4.1.2//EN\"
\"http://www.oasis-open.org/docbook/xml/4.0/docbookx.dtd\" [\n]>")
       )
)

(define-key sgml-mode-map "\C-i" 'sgml-insert-element)
; override default validate command to utilize OpenSP's onsgmls
executable
(setq sgml-validate-command "onsgmls -s %s %s")
; override default xml-mode validate command to utilize OpenSP's
onsgmls
; executable by using a mode-hook, since there appears to be no other
means
; to accomplish it.  
(defun my-psgml-xml-hook ()
  (setq sgml-validate-command "onsgmls -s %s %s")
  (setq sgml-declaration "C:\Program
Files\openjade-1.3.1\pubtext\xml.dcl")
)
(add-hook 'xml-mode-hook 'my-psgml-xml-hook)
            

;; -- End psgml / xml section -------- 


;; --- Begin HTML editing section: 
;; I require html helper mode because the hhm-config.el code seems to 
;; cause an error if I have both autoloaded.
(require 'html-helper-mode "html-helper-mode.el")
(autoload 'html-helper-mode "hhm-config.el")
(setq auto-mode-alist (cons '("\\.html$" . html-helper-mode)      
auto-mode-alist))
(setq auto-mode-alist (cons '("\\.asp$" . html-helper-mode)       
auto-mode-alist))
(setq auto-mode-alist (cons '("\\.phtml$" . html-helper-mode)     
auto-mode-alist))
;; --- End HTML editing section.


;; ----- CSS mode. 
;; This is for the css-mode (will not be necessary in later versions;
it should
;; be in the css-mode code itself):
(require 'apropos)  

;; For css-mode: (from http://synthcode.com/emacs/lang/css-mode.el )
;; Note: I've had crashing in this mode when I use an M-x
indent-region
;;       command.
(autoload 'css-mode "css-mode.el")
 (setq auto-mode-alist	     
      (cons '("\\.css$" . css-mode) auto-mode-alist))
;; ----- End CSS mode.


;; Make sure that .emacs file is edited in lisp mode:
(setq auto-mode-alist (cons '("\.emacs" . lisp-mode)       
auto-mode-alist))


;; ----- Diary and Appointment Notification Section.
;; There are also some variables set via the Emacs Customization
Utility.
;; See the end of the file for those.
;; Read the diary:
(diary) 
;; Show column number on mode line.
(column-number-mode t)
;; Show time on mode line, and set appointment notification.
;; (day-and-date)
(display-time)
(add-hook 'diary-hook 'appt-make-list)
(diary 0)
;; Special function to make appointments work:
(defun update-my-calendar ()
  (let ((diary-buffer (get-file-buffer diary-file))
        (number-of-diary-entries 30))
    (if diary-buffer
        (progn
          (set-buffer diary-buffer)
          (revert-buffer t t)))
    (calendar)))

;; Enable syntax coloring.
(global-font-lock-mode t)

(setq-default transient-mark-mode t)

;; Global key maps:
(global-set-key "\C-b" 'browse-url-of-file)
(global-set-key "\e/" 'replace-regexp)
(global-set-key "\C-xtl" 'goto-line)
(global-set-key "\e[" 'enlarge-window)
(global-set-key "\e]" 'shrink-window)
(global-set-key "\e=" 'eval-current-buffer)

;; These two key bindings are for up and down scrolling by a either
single line at a time
;; or by N lines at a time (default is scroll by one single line at a
time).  This is
;; very useful when working with narrow horizontal windows.  ;~)
;; To enter the desired N, hold down \C and type the number and then
hit z or q, all the
;; while holding down \C.
;; From the "Writing GNU Emacs Extensions" book, by Bob Glickstein.
(defun scroll-n-lines-up (&optional n) 
  "Scroll up N lines (1 line by default)."
  (interactive "P")
  (scroll-up (prefix-numeric-value n)))

(defun scroll-n-lines-down (&optional n) 
  "Scroll down N lines (1 line by default)."
  (interactive "P")
  (scroll-down (prefix-numeric-value n)))

(global-set-key "\C-q" 'scroll-n-lines-up)
(global-set-key "\C-z" 'scroll-n-lines-down)


;; These two bindings make it easier to find a mismatched parenthesis:
(global-set-key "\e'" 'forward-sexp)
(global-set-key "\e;" 'backward-sexp)

;;; Bracket/brace/parentheses highlighting:
   ;; The following is the command for Emacs 20.1 and later:
(show-paren-mode 1)
   ;; * Here is some Emacs Lisp that will make the % key show the
matching
   ;; parenthesis, like in vi.	In addition, if the cursor isn't over a
   ;; parenthesis, it simply inserts a % like normal.  (`Parenthesis'
actually
   ;;  includes and character with `open' or `close' syntax, which
usually means
   ;;  "()[]{}".)

      ;; By an unknown contributor

      (global-set-key "%" 'match-paren)

      (defun match-paren (arg)
	"Go to the matching parenthesis if on parenthesis otherwise insert
%."
	(interactive "p")
	(cond ((looking-at "\\s\(") (forward-list 1) (backward-char 1))
	      ((looking-at "\\s\)") (forward-char 1) (backward-list 1))
	      (t (self-insert-command (or arg 1)))))



;; The following functions enable on-the-fly switching between the
bash shell and DOS:
(defun set-shell-bash()
  (interactive)
  ;; (setq binary-process-input t)
  (setq shell-file-name "bash")
  (setq shell-command-switch "-c")
  (setq explicit-shell-file-name "bash")
  (setenv "SHELL" explicit-shell-file-name)
  (setq explicit-sh-args '("-login" "-i"))
  (setq w32-quote-process-args ?\")
  (setq mswindows-quote-process-args t)
  )

(defun set-shell-cmdproxy()
  (interactive)
  (setq shell-file-name "cmdproxy")
  (setq explicit-shell-file-name "cmdproxy")
  (setenv "SHELL" explicit-shell-file-name)
  (setq explicit-sh-args nil)
  (setq w32-quote-process-args nil)
  )

(global-set-key "\C-xg" 'set-shell-bash) ;; g for Gnu (\C-xb is used
for buffer switch command).
(global-set-key "\C-xd" 'set-shell-cmdproxy)
;; End shell-switch on-the-fly.


;; Begin move-to-window block:
;; This code is from the O'Reilly "GNU Emacs Extensions" book.
;; The purpose of it is to make a reasonable way to move to the next
OR previous window.
;; Change from C-x o to C-x n, so that we have Next and Previous.  
(global-set-key "\C-xn" 'other-window) 

;; We must make our own function to go to the previous window (but
it's simple):
(defun other-window-backward ()
  "Select the previous window."
  (interactive)
  (other-window -1))
;; Now we can bind to this function:
(global-set-key "\C-xp" 'other-window-backward)
;; End move to window block.

;; This turns on the buffer select list in the minibuffer to make it
easy to
;; edit any buffer in a given window or frame (C-r and C-s move
backwards and forwards, respectively,
;; through the buffer select list).
(require 'iswitchb)
(iswitchb-default-keybindings)

;; old: (setq show-paren-mode t)
;; old: (setq show-paren-style 'parenthesis)

;; Set a high recursion limit for parsing the long java files:
(setq max-specpdl-size 1000)

(put 'upcase-region 'disabled nil)

(put 'downcase-region 'disabled nil)

;; Adjust the colors and fonts to preference:
(set-default-font "Fixedsys")
(set-cursor-color "Deep Pink")
(set-face-foreground 'highlight "blue")
(set-face-background 'highlight "red")
(set-foreground-color "Green")
(set-background-color "Gray10")
(set-face-foreground 'custom-group-tag-face "Yellow")
(set-face-foreground 'custom-variable-tag-face "Magenta")
(set-face-foreground 'custom-state-face "Yellow")
(set-face-foreground 'font-lock-type-face "Goldenrod")
(set-face-foreground 'font-lock-comment-face "OrangeRed")
(set-face-foreground 'font-lock-function-name-face "Turquoise")
(set-face-foreground 'font-lock-keyword-face "Yellow")
(set-face-foreground 'font-lock-string-face "Magenta")
(set-face-foreground 'font-lock-variable-name-face "Coral")
(set-face-foreground 'modeline "yellow")
(set-face-background 'modeline "purple4") 
(set-face-background 'region "MidnightBlue")
(set-face-background 'secondary-selection "dodger blue")
(set-face-foreground 'diary-face "Yellow")
(set-face-background 'holiday-face "Pink")
(set-face-foreground 'holiday-face "Red")
(set-face-foreground 'widget-field-face "Sienna")
(set-face-foreground 'widget-single-line-field-face "Firebrick")
(set-face-foreground 'widget-inactive-face "White")
(set-face-foreground 'widget-documentation-face "Coral")
(set-mouse-color "yellow")

;; The following settings pertain to features that you may not have
installed on your GNU Emacs:
  ;; Begin speedbar section (Values set via Emac's 'Customize'
interface are found at the
  ;; bottom of the file, and hence if there is a 'conflict' they
override these values).
(set-face-foreground 'speedbar-directory-face "Green")
(set-face-background 'speedbar-directory-face "Black")
(set-face-foreground 'speedbar-highlight-face "DarkSlateGray")
(set-face-background 'speedbar-highlight-face "Gold")
(set-face-background 'speedbar-file-face "MidnightBlue")
(set-face-foreground 'speedbar-file-face "Gold")
(set-face-foreground 'speedbar-tag-face "Orange")
;; Set the speedbar pop-up window properties: Note that if the
speedbar height is too
;; great, the windowing-system's title bar for the 
;; speedbar window (at least on Windows2000) will not show completely.
(setq speedbar-frame-parameters '((width . 30)
								  (height . 45)
								  (foreground-color . "green")
								  (background-color . "black")))
  ;; End speedbar section. 

  ;; You may not want the following line if you do not have
paren-matching running:
(set-face-foreground 'show-paren-match-face "Red")
  ;; The following line is only if you have semantic installed:
;; doesn't work for semantic-1.4beta5 (set-face-foreground
'semantic-intangible-face "Gold")
  ;; The following line is only if you have the JDE installed:
(set-face-foreground 'jde-java-font-lock-link-face "Gold")

;;  ---------  This is SGML colorizing with the psgml package, loaded
above.

;;; Set up and enable syntax coloring. 
; Create faces  to assign markup categories.
(make-face 'sgml-doctype-face)
(make-face 'sgml-pi-face)
(make-face 'sgml-comment-face)
(make-face 'sgml-sgml-face)
(make-face 'sgml-start-tag-face)
(make-face 'sgml-end-tag-face)
(make-face 'sgml-entity-face)
(make-face 'sgml-attribute-face)

; Assign attributes to faces. 
(set-face-foreground 'sgml-doctype-face "yellow")
(set-face-foreground 'sgml-sgml-face "cyan1")
(set-face-foreground 'sgml-pi-face "magenta")
(set-face-foreground 'sgml-comment-face "purple")
(set-face-foreground 'sgml-start-tag-face "deep sky blue")
(set-face-foreground 'sgml-end-tag-face "white")
(set-face-foreground 'sgml-entity-face "orange")

; Assign faces to markup categories.
(setq sgml-markup-faces
      '((doctype	. sgml-doctype-face)
	(pi		. sgml-pi-face)
	(comment	. sgml-comment-face)
	(sgml	. sgml-sgml-face)
	(comment	. sgml-comment-face)
	(start-tag	. sgml-start-tag-face)
	(end-tag	. sgml-end-tag-face)
	(entity	. sgml-entity-face)))


; PSGML - enable face settings
(setq sgml-set-face t)

;; ---- End psgml highlighting section.

;; Gnus: using only for mail.
(setq gnus-select-method '(nntp "news.statesoftware.com"))
(add-hook 'nntp-server-opened-hook 'nntp-send-authinfo)



;; This checks to see if you've set the variable startup-directory and
checks to
;; see if you've set it to a real directory.  If so, it will switch
there.
(let ((working-directory (or startup-directory nil)))
  (if (and (and working-directory)
    (file-directory-p working-directory))
      (cd working-directory)))

;; Make sure that tabs are being used (default behavior, but doesn't
hurt in case something got changed):
;; (setq indent-tabs-mode t)

;; Make sure that no tab characters are used:
(setq indent-tabs-mode nil)

;; Set the variable default-tab-width.
(setq default-tab-width 4)

;; Define an easy way to move up in a dired directory, 
;; To instantly view a file in the web browser (IE or whatever) (this
needs a current directory argument to work better):
;; **NOTE: These bindings must be in a mode-hook, since dired isn't
automatically
;; loaded on startup and so it's keymap is void until you go into
dired.
(add-hook `dired-mode-hook
  `(lambda ()
		 (define-key dired-mode-map "\C-w" 'dired-up-directory)
     (define-key dired-mode-map "\C-b" 'browse-url)))

;; ---------- BEGIN BUG WORKAROUNDS SECTION:
;; This prevents dired from displaying itself in warning-face when the
;; default-tab-width is set to 2. 
  (defadvice dired-readin (around ecm-dired-indent activate)
    "Prevent indentation in dired from using tabs."
    (let ((indent-tabs-mode nil))
      ad-do-it))

;; ---------- END BUG WORKAROUNDS SECTION:

;; This enables saving the current desktop on shutdown.  The ESC-x
desktop-save
;; command must be given once for this to work in perpetuity. 
(desktop-load-default)
(desktop-read)

;;; My additions end here.


;; This was automatically written by the Emacs customization utility:
(custom-set-variables
  ;; custom-set-variables was added by Custom -- don't edit or
cut/paste it!
  ;; Your init file should contain only one such instance.
 '(browse-url-browser-function (quote
browse-url-default-windows-browser))
 '(browse-url-generic-program "mozilla")
 '(calculator-number-digits 10)
 '(frame-background-mode nil)
 '(jde-auto-parse-max-buffer-size 0)
 '(jde-bug-jdk-directory "c:/j2sdk1.4.0/")
 '(jde-bug-vm-includes-jpda-p t)
 '(jde-compile-option-verbose t)
 '(jde-db-debugger (quote ("JDEbug" "" . "Executable")))
 '(jde-db-source-directories (quote ("c:/Program
Files/jakarta-tomcat-3.2.4/webapps/dynasurv/WEB-INF/classes/com/treelogic_swe/frameworks/dynaquery"
"c:/Program Files/jakarta-tomcat-3.2.4/webapps/dynasurv/WEB-INF/classes/com/treelogic_swe/frameworks/dynaform"
"c:/Program Files/jakarta-tomcat-3.2.4/webapps/dynasurv/WEB-INF/classes/com/treelogic_swe/frameworks/dynafrontend")))
 '(jde-run-option-classpath (quote
("runner.jar;servlet.jar;org.apache.tomcat.shell.Startup")))
 '(jde-run-option-verbose (quote (t nil nil)))
 '(jde-run-option-vm-args (quote ("-Xdebug -Xnoagent
-Xrunjdwp:transport=dt_socket,address=6001,server=y,suspend=n")))
 '(jde-setnu-mode-threshold 200000)
 '(mail-host-address "ChristopherBalz@yahoo.com")
 '(midnight-delay 34200)
 '(midnight-hook (quote (update-my-calendar)))
 '(midnight-mode t nil (midnight))
 '(speedbar-show-unknown-files t)
 '(speedbar-use-images t)
 '(user-full-name "Christopher M. Balz")
 '(user-mail-address "ChristopherBalz@yahoo.com"))
(custom-set-faces
  ;; custom-set-faces was added by Custom -- don't edit or cut/paste
it!
  ;; Your init file should contain only one such instance.
 '(speedbar-button-face ((t (:background "black" :foreground "deep sky
blue"))))
 '(speedbar-file-face ((t (:background "black" :foreground
"yellow1"))))
 '(speedbar-selected-face ((((class color) (background dark))
(:background "black" :foreground "red" :underline t))))
 '(speedbar-tag-face ((t (:background "black" :foreground
"Orange")))))
 
	

reingold@emr.cs.iit.edu (Edward M. Reingold) wrote in message news:<85r8duuxcu.fsf@emr.cs.iit.edu>...
> >>>>> "CB" == Christopher Balz <ChristopherBalz@yahoo.com> writes:
> 
>     CB> buffers), the above feature isn't of much use to me.  What is needed,
>     CB> I'm sure by more people than just myself, is an Emacs calendar feature
>     CB> that will display the day's goings-on say at 9:00 a.m. daily.
> 
> Here is how I do it (at midnight):
> 
> (require 'midnight)
> (setq midnight-delay 1)
> 
> (defun update-my-calendar ()
>   (let ((diary-buffer (get-file-buffer diary-file))
>         (number-of-diary-entries 30))
>     (if diary-buffer
>         (progn
>           (set-buffer diary-buffer)
>           (revert-buffer t t)))
>     (calendar)))
> 
> (add-hook 'midnight-hook 'update-my-calendar)

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2002-11-15 17:48 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-11-08 18:31 Non-startup auto-reminder from calendar? Christopher Balz
2002-11-09  0:11 ` Kevin Rodgers
2002-11-09 23:39 ` Edward M. Reingold
2002-11-15 17:48   ` Christopher Balz

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).