unofficial mirror of help-gnu-emacs@gnu.org
 help / color / mirror / Atom feed
* Expand/unexpand window possible?
@ 2009-03-12 10:03 Lars Haugseth
  2009-03-12 10:29 ` Pascal J. Bourguignon
                   ` (5 more replies)
  0 siblings, 6 replies; 15+ messages in thread
From: Lars Haugseth @ 2009-03-12 10:03 UTC (permalink / raw)
  To: help-gnu-emacs

When typing C-x 1 in a multi-window frame, the current window will fill
the entire frame, but all other windows will be deleted so that there will
be no going back to the previous multi-window setup. Is there any way to
achieve this expand/unexpand functionality without major elisp wizardry on
my part?

-- 
Lars Haugseth

"If anyone disagrees with anything I say, I am quite prepared not only to
 retract it, but also to deny under oath that I ever said it." -Tom Lehrer


^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Expand/unexpand window possible?
  2009-03-12 10:03 Expand/unexpand window possible? Lars Haugseth
@ 2009-03-12 10:29 ` Pascal J. Bourguignon
  2009-03-12 11:07   ` Lars Haugseth
  2009-03-12 11:17 ` Marc Tfardy
                   ` (4 subsequent siblings)
  5 siblings, 1 reply; 15+ messages in thread
From: Pascal J. Bourguignon @ 2009-03-12 10:29 UTC (permalink / raw)
  To: help-gnu-emacs

Lars Haugseth <njus@larshaugseth.com> writes:

> When typing C-x 1 in a multi-window frame, the current window will fill
> the entire frame, but all other windows will be deleted so that there will
> be no going back to the previous multi-window setup. Is there any way to
> achieve this expand/unexpand functionality without major elisp wizardry on
> my part?

What about minor elisp wizardry on MY part?

(defun temporarily-expand ()
  (interactive)
  (save-window-excursion
    (delete-other-windows)
    (message "Finish with %s" 
             (describe-key-briefly (first (where-is-internal 'abort-recursive-edit))))
    (recursive-edit)))


-- 
__Pascal Bourguignon__


^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Expand/unexpand window possible?
  2009-03-12 10:29 ` Pascal J. Bourguignon
@ 2009-03-12 11:07   ` Lars Haugseth
  2009-03-12 12:42     ` cmic
  2009-03-12 13:34     ` rustom
  0 siblings, 2 replies; 15+ messages in thread
From: Lars Haugseth @ 2009-03-12 11:07 UTC (permalink / raw)
  To: help-gnu-emacs

* pjb@informatimago.com (Pascal J. Bourguignon) wrote:
> 
> Lars Haugseth <njus@larshaugseth.com> writes:
> 
> > When typing C-x 1 in a multi-window frame, the current window will fill
> > the entire frame, but all other windows will be deleted so that there will
> > be no going back to the previous multi-window setup. Is there any way to
> > achieve this expand/unexpand functionality without major elisp wizardry on
> > my part?
> 
> What about minor elisp wizardry on MY part?
> 
> (defun temporarily-expand ()
>   (interactive)
>   (save-window-excursion
>     (delete-other-windows)
>     (message "Finish with %s" 
>              (describe-key-briefly (first (where-is-internal 'abort-recursive-edit))))
>     (recursive-edit)))

Lovely! Much appreciated.

-- 
Lars Haugseth

"If anyone disagrees with anything I say, I am quite prepared not only to
 retract it, but also to deny under oath that I ever said it." -Tom Lehrer


^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Expand/unexpand window possible?
  2009-03-12 10:03 Expand/unexpand window possible? Lars Haugseth
  2009-03-12 10:29 ` Pascal J. Bourguignon
@ 2009-03-12 11:17 ` Marc Tfardy
  2009-03-12 14:38 ` Andy Stewart
                   ` (3 subsequent siblings)
  5 siblings, 0 replies; 15+ messages in thread
From: Marc Tfardy @ 2009-03-12 11:17 UTC (permalink / raw)
  To: help-gnu-emacs

Lars Haugseth schrieb:
> When typing C-x 1 in a multi-window frame, the current window will fill
> the entire frame, but all other windows will be deleted so that there will
> be no going back to the previous multi-window setup. Is there any way to
> achieve this expand/unexpand functionality without major elisp wizardry on
> my part?
> 

window-configuration-to-register is solution for your problem:

,----[ C-h f window-configuration-to-register RET ]
| window-configuration-to-register is an interactive compiled Lisp function in `register.el'.
| It is bound to C-x r w.
| (window-configuration-to-register register &optional arg)
|
| Store the window configuration of the selected frame in register register.
| Use C-x r j to restore the configuration.
| Argument is a character, naming the register.
|
| [back]
`----

regards
Marc



^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Expand/unexpand window possible?
  2009-03-12 11:07   ` Lars Haugseth
@ 2009-03-12 12:42     ` cmic
  2009-03-12 12:51       ` Anders Wirzenius
  2009-03-12 13:23       ` Pascal J. Bourguignon
  2009-03-12 13:34     ` rustom
  1 sibling, 2 replies; 15+ messages in thread
From: cmic @ 2009-03-12 12:42 UTC (permalink / raw)
  To: help-gnu-emacs

On 12 mar, 12:07, Lars Haugseth <n...@larshaugseth.com> wrote:
> * p...@informatimago.com (Pascal J. Bourguignon) wrote:
>
>
>
>
>
> > Lars Haugseth <n...@larshaugseth.com> writes:
>
> > > When typing C-x 1 in a multi-window frame, the current window will fill
> > > the entire frame, but all other windows will be deleted so that there will
> > > be no going back to the previous multi-window setup. Is there any way to
> > > achieve this expand/unexpand functionality without major elisp wizardry on
> > > my part?
>
> > What about minor elisp wizardry on MY part?
>
> > (defun temporarily-expand ()
> >   (interactive)
> >   (save-window-excursion
> >     (delete-other-windows)
> >     (message "Finish with %s"
> >              (describe-key-briefly (first (where-is-internal 'abort-recursive-edit))))
> >     (recursive-edit)))
>
> Lovely! Much appreciated.

huh. Sorry, but [as a neophyt] how to use this snippet of code?
I did put it in .emacs, then open 2 windows, then M-x  temporarily-
expand
but what else ?

rgds
--
michel marcon aka cmic
>
> --
> Lars Haugseth
>
> "If anyone disagrees with anything I say, I am quite prepared not only to
>  retract it, but also to deny under oath that I ever said it." -Tom Lehrer



^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Expand/unexpand window possible?
  2009-03-12 12:42     ` cmic
@ 2009-03-12 12:51       ` Anders Wirzenius
  2009-03-12 13:23       ` Pascal J. Bourguignon
  1 sibling, 0 replies; 15+ messages in thread
From: Anders Wirzenius @ 2009-03-12 12:51 UTC (permalink / raw)
  To: help-gnu-emacs

cmic@live.fr writes:

> On 12 mar, 12:07, Lars Haugseth <n...@larshaugseth.com> wrote:
>> * p...@informatimago.com (Pascal J. Bourguignon) wrote:
>>
>>
>>
>>
>>
>> > Lars Haugseth <n...@larshaugseth.com> writes:
>>
>> > > When typing C-x 1 in a multi-window frame, the current window will fill
>> > > the entire frame, but all other windows will be deleted so that there will
>> > > be no going back to the previous multi-window setup. Is there any way to
>> > > achieve this expand/unexpand functionality without major elisp wizardry on
>> > > my part?
>>
>> > What about minor elisp wizardry on MY part?
>>
>> > (defun temporarily-expand ()
>> >   (interactive)
>> >   (save-window-excursion
>> >     (delete-other-windows)
>> >     (message "Finish with %s"
>> >              (describe-key-briefly (first (where-is-internal 'abort-recursive-edit))))
>> >     (recursive-edit)))
>>
>> Lovely! Much appreciated.
>
> huh. Sorry, but [as a neophyt] how to use this snippet of code?
> I did put it in .emacs, then open 2 windows, then M-x  temporarily-
> expand
> but what else ?
>
> rgds
> --
> michel marcon aka cmic
>>
>> --
>> Lars Haugseth
>>
>> "If anyone disagrees with anything I say, I am quite prepared not only to
>>  retract it, but also to deny under oath that I ever said it." -Tom Lehrer

M-x abort-recursive-edit

You may want to assign those commands to some key.

-- 
Anders


^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Expand/unexpand window possible?
  2009-03-12 12:42     ` cmic
  2009-03-12 12:51       ` Anders Wirzenius
@ 2009-03-12 13:23       ` Pascal J. Bourguignon
  2009-03-12 16:32         ` cmic
  1 sibling, 1 reply; 15+ messages in thread
From: Pascal J. Bourguignon @ 2009-03-12 13:23 UTC (permalink / raw)
  To: help-gnu-emacs

cmic@live.fr writes:

> On 12 mar, 12:07, Lars Haugseth <n...@larshaugseth.com> wrote:
>> * p...@informatimago.com (Pascal J. Bourguignon) wrote:
>>
>>
>>
>>
>>
>> > Lars Haugseth <n...@larshaugseth.com> writes:
>>
>> > > When typing C-x 1 in a multi-window frame, the current window will fill
>> > > the entire frame, but all other windows will be deleted so that there will
>> > > be no going back to the previous multi-window setup. Is there any way to
>> > > achieve this expand/unexpand functionality without major elisp wizardry on
>> > > my part?
>>
>> > What about minor elisp wizardry on MY part?
>>
>> > (defun temporarily-expand ()
>> >   (interactive)
>> >   (save-window-excursion
>> >     (delete-other-windows)
>> >     (message "Finish with %s"
>> >              (describe-key-briefly (first (where-is-internal 'abort-recursive-edit))))
>> >     (recursive-edit)))
>>
>> Lovely! Much appreciated.
>
> huh. Sorry, but [as a neophyt] how to use this snippet of code?
> I did put it in .emacs, then open 2 windows, then M-x  temporarily-
> expand
> but what else ?

As a newbie, you need to learn to be aware of the mini-buffer and the
mode line.  These are the two lines at the bottom of the emacs frame.
When  youtype M-x temporary-expand RET, a message appears in the
mini-buffer tell you what to do then to revert to the initial window
confguration. Namely, type C-], with the standard keymap.

Otherwise, window-configuration-to-register is nice too.

-- 
__Pascal Bourguignon__


^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Expand/unexpand window possible?
  2009-03-12 11:07   ` Lars Haugseth
  2009-03-12 12:42     ` cmic
@ 2009-03-12 13:34     ` rustom
  2009-03-12 15:44       ` Pascal J. Bourguignon
  1 sibling, 1 reply; 15+ messages in thread
From: rustom @ 2009-03-12 13:34 UTC (permalink / raw)
  To: help-gnu-emacs

On Mar 12, 4:07 pm, Lars Haugseth <n...@larshaugseth.com> wrote:
> * p...@informatimago.com (Pascal J. Bourguignon) wrote:

>
> Lovely! Much appreciated.

Yes thats nice.
But I had to change first to car.
Did car become first some time?

>
> --
> Lars Haugseth
>
> "If anyone disagrees with anything I say, I am quite prepared not only to
>  retract it, but also to deny under oath that I ever said it." -Tom Lehrer



^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Expand/unexpand window possible?
  2009-03-12 10:03 Expand/unexpand window possible? Lars Haugseth
  2009-03-12 10:29 ` Pascal J. Bourguignon
  2009-03-12 11:17 ` Marc Tfardy
@ 2009-03-12 14:38 ` Andy Stewart
  2009-03-12 17:42 ` Jim Burton
                   ` (2 subsequent siblings)
  5 siblings, 0 replies; 15+ messages in thread
From: Andy Stewart @ 2009-03-12 14:38 UTC (permalink / raw)
  To: help-gnu-emacs

Lars Haugseth <njus@larshaugseth.com> writes:

> When typing C-x 1 in a multi-window frame, the current window will fill
> the entire frame, but all other windows will be deleted so that there will
> be no going back to the previous multi-window setup. Is there any way to
> achieve this expand/unexpand functionality without major elisp wizardry on
> my part?
(defvar toggle-one-window-window-configuration nil
  "The window configuration use for `toggle-one-window'.")

(defun toggle-one-window ()
  "Toggle between window layout and one window."
  (interactive)
  (if (one-window-p t)
      (if toggle-one-window-window-configuration
          (progn
            (set-window-configuration toggle-one-window-window-configuration)
            (setq toggle-one-window-window-configuration nil))
        (message "No other windows exist."))
    (setq toggle-one-window-window-configuration (current-window-configuration))
    (delete-other-windows)))

Above the code that i use.

  -- Andy





^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Expand/unexpand window possible?
  2009-03-12 13:34     ` rustom
@ 2009-03-12 15:44       ` Pascal J. Bourguignon
  2009-03-12 18:25         ` Evans Winner
  0 siblings, 1 reply; 15+ messages in thread
From: Pascal J. Bourguignon @ 2009-03-12 15:44 UTC (permalink / raw)
  To: help-gnu-emacs

rustom <rustompmody@gmail.com> writes:

> On Mar 12, 4:07 pm, Lars Haugseth <n...@larshaugseth.com> wrote:
>> * p...@informatimago.com (Pascal J. Bourguignon) wrote:
>
>>
>> Lovely! Much appreciated.
>
> Yes thats nice.
> But I had to change first to car.
> Did car become first some time?

Incredible!  first is not in basic emacs lisp, but in cl.el
You have to (require 'cl) to have it.
I have this require in my ~/.emacs so I'm oblivious to cl'isms...
I can't understand why RMS hasn't rewritten emacs in Common Lisp a
long time ago... (apart from him saying that he didn't like CL).

-- 
__Pascal Bourguignon__


^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Expand/unexpand window possible?
  2009-03-12 13:23       ` Pascal J. Bourguignon
@ 2009-03-12 16:32         ` cmic
  0 siblings, 0 replies; 15+ messages in thread
From: cmic @ 2009-03-12 16:32 UTC (permalink / raw)
  To: help-gnu-emacs

On 12 mar, 14:23, p...@informatimago.com (Pascal J. Bourguignon)
wrote:
> c...@live.fr writes:
> > On 12 mar, 12:07, Lars Haugseth <n...@larshaugseth.com> wrote:
> >> * p...@informatimago.com (Pascal J. Bourguignon) wrote:
>
> >> > Lars Haugseth <n...@larshaugseth.com> writes:
>
> >> > > When typing C-x 1 in a multi-window frame, the current window will fill
> >> > > the entire frame, but all other windows will be deleted so that there will
> >> > > be no going back to the previous multi-window setup. Is there any way to
> >> > > achieve this expand/unexpand functionality without major elisp wizardry on
> >> > > my part?
>
> >> > What about minor elisp wizardry on MY part?
>
> >> > (defun temporarily-expand ()
> >> >   (interactive)
> >> >   (save-window-excursion
> >> >     (delete-other-windows)
> >> >     (message "Finish with %s"
> >> >              (describe-key-briefly (first (where-is-internal 'abort-recursive-edit))))
> >> >     (recursive-edit)))
>
> >> Lovely! Much appreciated.
>
> > huh. Sorry, but [as a neophyt] how to use this snippet of code?
> > I did put it in .emacs, then open 2 windows, then M-x  temporarily-
> > expand
> > but what else ?
>
> As a newbie, you need to learn to be aware of the mini-buffer and the
> mode line.  These are the two lines at the bottom of the emacs frame.
> When  youtype M-x temporary-expand RET, a message appears in the
> mini-buffer tell you what to do then to revert to the initial window
> confguration. Namely, type C-], with the standard keymap.

OK. Merci. I already know a bit of Emacs. But the clue was farther in
the thread: car instead of fist (Argh!!)
Bonne continuation
--
michel marcon aka cmic

>
> Otherwise, window-configuration-to-register is nice too.
>
> --
> __Pascal Bourguignon__



^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Expand/unexpand window possible?
  2009-03-12 10:03 Expand/unexpand window possible? Lars Haugseth
                   ` (2 preceding siblings ...)
  2009-03-12 14:38 ` Andy Stewart
@ 2009-03-12 17:42 ` Jim Burton
  2009-03-12 21:35 ` Bernardo
  2009-03-16 11:21 ` Lars Haugseth
  5 siblings, 0 replies; 15+ messages in thread
From: Jim Burton @ 2009-03-12 17:42 UTC (permalink / raw)
  To: help-gnu-emacs

Lars Haugseth <njus@larshaugseth.com> writes:

> When typing C-x 1 in a multi-window frame, the current window will fill
> the entire frame, but all other windows will be deleted so that there will
> be no going back to the previous multi-window setup. Is there any way to
> achieve this expand/unexpand functionality without major elisp wizardry on
> my part?

Add

(winner-mode 1)

to .emacs, then C-c left and C-c right move around in the history of
window configurations.
-- 
Jim Burton
jim@sdf-eu.org


^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Expand/unexpand window possible?
  2009-03-12 15:44       ` Pascal J. Bourguignon
@ 2009-03-12 18:25         ` Evans Winner
  0 siblings, 0 replies; 15+ messages in thread
From: Evans Winner @ 2009-03-12 18:25 UTC (permalink / raw)
  To: help-gnu-emacs

pjb@informatimago.com (Pascal J. Bourguignon) writes:

    I can't understand why RMS hasn't rewritten emacs in
    Common Lisp a long time ago... (apart from him saying
    that he didn't like CL).

That's usually enough of a reason for most people.

LiCE compiled for me on sbcl recently[1].  It also
presumably runs on Movitz.  It's not exactly production-
ready, and I'm not nearly enough of a cl hacker to work on
it, but it has the virtue (in my opinion) over other
attempts at a cl-based Emacs that it 1) runs in a tty, and
2) attempts an API for Emacs lisp, so that it could
eventually run (much of?) the existing Emacs lisp code.  It
includes ELIZA, which at a glance looks like it was simple
to port.  If LiCE ever gets to the point where it is even
reasonably usable I for one would be willing to do some of
the grunt work of trying to get Elisp libraries running on
it, assuming that ends up as straight-forward as it seems he
(Betts) intends it to be.

Footnotes: 
[1]  http://www.emmett.ca/~sabetts/



^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Expand/unexpand window possible?
  2009-03-12 10:03 Expand/unexpand window possible? Lars Haugseth
                   ` (3 preceding siblings ...)
  2009-03-12 17:42 ` Jim Burton
@ 2009-03-12 21:35 ` Bernardo
  2009-03-16 11:21 ` Lars Haugseth
  5 siblings, 0 replies; 15+ messages in thread
From: Bernardo @ 2009-03-12 21:35 UTC (permalink / raw)
  To: help-gnu-emacs


> When typing C-x 1 in a multi-window frame, the current window will fill
> the entire frame, but all other windows will be deleted so that there will
> be no going back to the previous multi-window setup. Is there any way to
> achieve this expand/unexpand functionality without major elisp wizardry on
> my part?
> 

another possibility is having (winner-mode 1) in your .emacs

C-c left and C-c right (the default binding) will cycle between previous 
window arrangements




^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Expand/unexpand window possible?
  2009-03-12 10:03 Expand/unexpand window possible? Lars Haugseth
                   ` (4 preceding siblings ...)
  2009-03-12 21:35 ` Bernardo
@ 2009-03-16 11:21 ` Lars Haugseth
  5 siblings, 0 replies; 15+ messages in thread
From: Lars Haugseth @ 2009-03-16 11:21 UTC (permalink / raw)
  To: help-gnu-emacs

* Lars Haugseth <njus@larshaugseth.com> wrote:
> 
> When typing C-x 1 in a multi-window frame, the current window will fill
> the entire frame, but all other windows will be deleted so that there will
> be no going back to the previous multi-window setup. Is there any way to
> achieve this expand/unexpand functionality without major elisp wizardry on
> my part?

Whoa, lots of different suggestions here. I'll check them all out and see
which one best suits the way I work. Thanks to all who replied!

-- 
Lars Haugseth

"If anyone disagrees with anything I say, I am quite prepared not only to
 retract it, but also to deny under oath that I ever said it." -Tom Lehrer


^ permalink raw reply	[flat|nested] 15+ messages in thread

end of thread, other threads:[~2009-03-16 11:21 UTC | newest]

Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-03-12 10:03 Expand/unexpand window possible? Lars Haugseth
2009-03-12 10:29 ` Pascal J. Bourguignon
2009-03-12 11:07   ` Lars Haugseth
2009-03-12 12:42     ` cmic
2009-03-12 12:51       ` Anders Wirzenius
2009-03-12 13:23       ` Pascal J. Bourguignon
2009-03-12 16:32         ` cmic
2009-03-12 13:34     ` rustom
2009-03-12 15:44       ` Pascal J. Bourguignon
2009-03-12 18:25         ` Evans Winner
2009-03-12 11:17 ` Marc Tfardy
2009-03-12 14:38 ` Andy Stewart
2009-03-12 17:42 ` Jim Burton
2009-03-12 21:35 ` Bernardo
2009-03-16 11:21 ` Lars Haugseth

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).