* Re: "emacs --daemon" does not load init file [not found] <mailman.1212.1227617005.26697.help-gnu-emacs@gnu.org> @ 2008-11-25 13:27 ` Richard Riley 2008-11-25 13:59 ` Richard Riley 2008-11-25 16:08 ` Chengqi(Lars) Song 0 siblings, 2 replies; 8+ messages in thread From: Richard Riley @ 2008-11-25 13:27 UTC (permalink / raw) To: help-gnu-emacs "Chengqi(Lars) Song" <songcq@gmail.com> writes: > Hi, > > I'm using emacs23 snapshot, now it has a fancy function "emacs > --daemon" to run emacs in background. But when I use "emacsclient -c" > to connect to the daemon, I found that my ~/.emacs is not > loaded. That's so bad, is there anyone experienced in emacs daemon? > Thanks. > > best > lars using CVS emacs, I use "emacs -daemon" and it executes the .emacs or init fine. "--" or "-" both seem to work from a bash shell btw. Are you sure there is no error in your .emacs? Did you run emacs -daemon from the command line where you can see any error output? Just to be sure - you dont expect emacs -c to run the .emacs? ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: "emacs --daemon" does not load init file 2008-11-25 13:27 ` "emacs --daemon" does not load init file Richard Riley @ 2008-11-25 13:59 ` Richard Riley 2008-11-25 16:08 ` Chengqi(Lars) Song 1 sibling, 0 replies; 8+ messages in thread From: Richard Riley @ 2008-11-25 13:59 UTC (permalink / raw) To: help-gnu-emacs Richard Riley <rileyrgdev@gmail.com> writes: > "Chengqi(Lars) Song" <songcq@gmail.com> writes: > >> Hi, >> >> I'm using emacs23 snapshot, now it has a fancy function "emacs >> --daemon" to run emacs in background. But when I use "emacsclient -c" >> to connect to the daemon, I found that my ~/.emacs is not >> loaded. That's so bad, is there anyone experienced in emacs daemon? >> Thanks. >> >> best >> lars > > using CVS emacs, I use "emacs -daemon" and it executes the .emacs or > init fine. "--" or "-" both seem to work from a bash shell btw. > > Are you sure there is no error in your .emacs? Did you run emacs -daemon > from the command line where you can see any error output? > > Just to be sure - you dont expect emacs -c to run the .emacs? ^^^^^^^^^^^^^^^^^^^^^ I meant : "emacsclient -c" And if Debian based Linux : And did you be sure to run "sudo update-alternatives --config" for emacs and emacsclient? ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: "emacs --daemon" does not load init file 2008-11-25 13:27 ` "emacs --daemon" does not load init file Richard Riley 2008-11-25 13:59 ` Richard Riley @ 2008-11-25 16:08 ` Chengqi(Lars) Song 2008-11-25 19:45 ` Tassilo Horn 2008-11-25 22:44 ` "emacs --daemon" does not load init file Peter Dyballa 1 sibling, 2 replies; 8+ messages in thread From: Chengqi(Lars) Song @ 2008-11-25 16:08 UTC (permalink / raw) To: help-gnu-emacs Hi, Yeah, when I run "emacs --daemon" in console it shows this error message: error: Fontset `tty' does not exist But if run "emacs" there is no such message. Note that my emacs is emacs-gtk. The font setting script in my .emacs is: ;; font setting (set-default-font "Bitstream Vera Sans Mono-10") (set-fontset-font (frame-parameter nil 'font) 'chinese-gbk '("Microsfot Yahei-10" . "unicode-bmp")) Is there anything wrong? Best Lars On Tue, 25 Nov 2008, Richard Riley wrote: > > "Chengqi(Lars) Song" <songcq@gmail.com> writes: > > > Hi, > > > > I'm using emacs23 snapshot, now it has a fancy function "emacs > > --daemon" to run emacs in background. But when I use "emacsclient -c" > > to connect to the daemon, I found that my ~/.emacs is not > > loaded. That's so bad, is there anyone experienced in emacs daemon? > > Thanks. > > > > best > > lars > > using CVS emacs, I use "emacs -daemon" and it executes the .emacs or > init fine. "--" or "-" both seem to work from a bash shell btw. > > Are you sure there is no error in your .emacs? Did you run emacs -daemon > from the command line where you can see any error output? > > Just to be sure - you dont expect emacs -c to run the .emacs? ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: "emacs --daemon" does not load init file 2008-11-25 16:08 ` Chengqi(Lars) Song @ 2008-11-25 19:45 ` Tassilo Horn 2008-11-26 2:42 ` Chengqi(Lars) Song 2008-11-25 22:44 ` "emacs --daemon" does not load init file Peter Dyballa 1 sibling, 1 reply; 8+ messages in thread From: Tassilo Horn @ 2008-11-25 19:45 UTC (permalink / raw) To: help-gnu-emacs "Chengqi(Lars) Song" <songcq@gmail.com> writes: Hi! > Yeah, when I run "emacs --daemon" in console it shows this error > message: > > error: Fontset `tty' does not exist > > But if run "emacs" there is no such message. Note that my emacs is > emacs-gtk. > > The font setting script in my .emacs is: > > ;; font setting > (set-default-font "Bitstream Vera Sans Mono-10") > (set-fontset-font (frame-parameter nil 'font) > 'chinese-gbk '("Microsfot Yahei-10" . "unicode-bmp")) > > Is there anything wrong? As I've said in <87od03j3vf.fsf@thinkpad.tsdh.de> there's no initial frame when starting emacs as daemon, so you cannot get frame parameters. Maybe adding the code to `window-setup-hook' will work. Or simply use `M-x customize-face' for font settings. Bye, Tassilo -- Richard Stallman doesn't need it, since he already read the internet. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: "emacs --daemon" does not load init file 2008-11-25 19:45 ` Tassilo Horn @ 2008-11-26 2:42 ` Chengqi(Lars) Song 2008-11-26 7:43 ` Adding toolbar buttons Maindoor 0 siblings, 1 reply; 8+ messages in thread From: Chengqi(Lars) Song @ 2008-11-26 2:42 UTC (permalink / raw) To: help-gnu-emacs I changed the frame related settings to: (add-hook 'window-setup-hook (lambda nil ;; font setting (set-default-font "Bitstream Vera Sans Mono-10") (set-fontset-font (frame-parameter nil 'font) 'chinese-gbk '("Microsfot Yahei-10" . "unicode-bmp")) ;; window positioning (setq default-frame-alist '((top . 0) (left . 0) (width . 100) (height . 40))) )) Now emacs-daemon can startup without any error message: loading..... loading..... loading..... starting emacs daemon.... But then I found emacsclient -c can not connect to emacs daemon, and "ps ax|grep emacs" returns nothing. That means emacs daemon failed to startup... It's so wierd, and I don't know why... On Tue, 25 Nov 2008, Tassilo Horn wrote: > As I've said in <87od03j3vf.fsf@thinkpad.tsdh.de> there's no initial > frame when starting emacs as daemon, so you cannot get frame parameters. > Maybe adding the code to `window-setup-hook' will work. Or simply use > `M-x customize-face' for font settings. > > Bye, > Tassilo > -- > Richard Stallman doesn't need it, since he already read the internet. > > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Adding toolbar buttons 2008-11-26 2:42 ` Chengqi(Lars) Song @ 2008-11-26 7:43 ` Maindoor 2008-11-26 13:18 ` Maindoor 0 siblings, 1 reply; 8+ messages in thread From: Maindoor @ 2008-11-26 7:43 UTC (permalink / raw) To: help-gnu-emacs [-- Attachment #1: Type: text/plain, Size: 236 bytes --] I want to add toolbar buttons, I searched around and found that it could be done using toolbar utils. Can anyone tell where I can find toolbar-utils.el, edit-toolbar.el & xemacs-toolbar.el ? I am using kubuntu 8.04. Thanks. [-- Attachment #2: Type: text/html, Size: 407 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Adding toolbar buttons 2008-11-26 7:43 ` Adding toolbar buttons Maindoor @ 2008-11-26 13:18 ` Maindoor 0 siblings, 0 replies; 8+ messages in thread From: Maindoor @ 2008-11-26 13:18 UTC (permalink / raw) To: help-gnu-emacs [-- Attachment #1: Type: text/plain, Size: 603 bytes --] Looks like the functionality is there, but i cannot get it to work like tool-bar-add-item. If someone has tried it do let me know. --- On Wed, 11/26/08, Maindoor <sanjeevfiles@yahoo.com> wrote: From: Maindoor <sanjeevfiles@yahoo.com> Subject: Adding toolbar buttons To: "help-gnu-emacs" <help-gnu-emacs@gnu.org> Date: Wednesday, November 26, 2008, 1:13 PM I want to add toolbar buttons, I searched around and found that it could be done using toolbar utils. Can anyone tell where I can find toolbar-utils.el, edit-toolbar.el & xemacs-toolbar.el ? I am using kubuntu 8.04. Thanks. [-- Attachment #2: Type: text/html, Size: 1296 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: "emacs --daemon" does not load init file 2008-11-25 16:08 ` Chengqi(Lars) Song 2008-11-25 19:45 ` Tassilo Horn @ 2008-11-25 22:44 ` Peter Dyballa 1 sibling, 0 replies; 8+ messages in thread From: Peter Dyballa @ 2008-11-25 22:44 UTC (permalink / raw) To: Chengqi Song; +Cc: help-gnu-emacs Am 25.11.2008 um 17:08 schrieb Chengqi(Lars) Song: > ;; font setting > (set-default-font "Bitstream Vera Sans Mono-10") > (set-fontset-font (frame-parameter nil 'font) > 'chinese-gbk '("Microsfot Yahei-10" . "unicode- > bmp")) > > Is there anything wrong? At least the second statement is only applicable when GNU Emacs runs in windowing environment. You should execute it, and maybe more, only when the window-system is not nil. My init file is organised like this – and I can launch GNU Emacs 23.0.60 as daemon. -- Greetings Pete Never be led astray onto the path of virtue ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2008-11-26 13:18 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- [not found] <mailman.1212.1227617005.26697.help-gnu-emacs@gnu.org> 2008-11-25 13:27 ` "emacs --daemon" does not load init file Richard Riley 2008-11-25 13:59 ` Richard Riley 2008-11-25 16:08 ` Chengqi(Lars) Song 2008-11-25 19:45 ` Tassilo Horn 2008-11-26 2:42 ` Chengqi(Lars) Song 2008-11-26 7:43 ` Adding toolbar buttons Maindoor 2008-11-26 13:18 ` Maindoor 2008-11-25 22:44 ` "emacs --daemon" does not load init file Peter Dyballa
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).