Changing Color Of Column # In Modeline

Changing Color Of Column # In Modeline

[gamename]

Hi,

How can I change the color of the column number displayed in the
modeline when when its greater than a certain value?   The coding
standard where I work requires that all code be within 80 columns.  So
I would like to create an eye-catcher by changing the modeline column
value to red after the point exceeds the 79th column.

Is that possible?  Does anyone have a code snippet which does that or
something similar?

TIA,
-T

Re: Changing Color Of Column # In Modeline

[M Jared Finder]

gamename wrote:
> Hi,
> 
> How can I change the color of the column number displayed in the
> modeline when when its greater than a certain value?   The coding
> standard where I work requires that all code be within 80 columns.  So
> I would like to create an eye-catcher by changing the modeline column
> value to red after the point exceeds the 79th column.
> 
> Is that possible?  Does anyone have a code snippet which does that or
> something similar?

Margin-mode <http://www.xanadb.com/archive/emacs/20040630> sounds like 
what you want.

   -- MJF

Re: Changing Color Of Column # In Modeline

[rgb]

> How can I change the color of the column number displayed in the
> modeline when when its greater than a certain value?   The coding
> standard where I work requires that all code be within 80 columns.  So
> I would like to create an eye-catcher by changing the modeline column
> value to red after the point exceeds the 79th column.
>
> Is that possible?  Does anyone have a code snippet which does that or
> something similar?

http://www.emacswiki.org/cgi-bin/wiki/ColumnMarker

Using it is as easy as:

(require 'column-marker)
(add-hook foo-mode-hook (lambda ()(interactive)(column-marker-1 80)))

Re: Changing Color Of Column # In Modeline

[gamename]

Thanks, but what I'm trying to figure out is how to change the color of
the column display on the _modeline_ itself.  So, if my point is at col
80 in the buffer, I'd like to update the modeline to show "C80" in some
eye-catching way.  

Is that possible?

-T

Re: Changing Color Of Column # In Modeline

[Ilya Zakharevich]

[A complimentary Cc of this posting was sent to
rgb
<rbielaws@i1.net>], who wrote in article <1132680280.003922.155730@g47g2000cwa.googlegroups.com>:
> > Is that possible?  Does anyone have a code snippet which does that or
> > something similar?
> 
> http://www.emacswiki.org/cgi-bin/wiki/ColumnMarker

This one looks too restrictive.  Some time ago I wrote this:

(defun match-at-column-79 (end)
  (let (done c res)
    (while (and (not done)
		(< (point) end))
      ;;(message "At point=%s, end=%s, col=%s" (point) end (setq c (current-column)))
      (cond				; need to move forward >=1 char
	  ((< 79 (current-column))
	   (forward-line 1))		; will not move at eobp only
	  ((< 79 (move-to-column 80))	; will move >= 0 char; 0 chars at eolp
	   (setq done t res t)
	   (forward-char -1)
	   (re-search-forward "."))
	  ((eobp)
	   (setq done t))
	  (t
	   (forward-line 1))))
    res))

(add-hook 'font-lock-mode-hook
	  (function
	   (lambda ()
	     (font-lock-add-keywords 
	      nil
	      '((match-at-column-79 0 secondary-selection t))
	      'append))))

Hope this helps,
Ilya

Re: Changing Color Of Column # In Modeline

[M Jared Finder]

gamename wrote:
> Thanks, but what I'm trying to figure out is how to change the color of
> the column display on the _modeline_ itself.  So, if my point is at col
> 80 in the buffer, I'd like to update the modeline to show "C80" in some
> eye-catching way.  
> 
> Is that possible?

How about putting this in your init file:

(setf mode-line-position '(:eval (if (>= (current-column) 80)
                                      '(:propertize "(%l,%c)" face bold)
                                    "(%l,%c)")))

This code does not respect line-number-mode or column-number-mode; I've 
assumed you have them both on.

   -- MJF

Re: Changing Color Of Column # In Modeline

[Kevin Rodgers]

M Jared Finder wrote:
 > How about putting this in your init file:
 >
 > (setf mode-line-position '(:eval (if (>= (current-column) 80)
 >                                      '(:propertize "(%l,%c)" face bold)
 >                                    "(%l,%c)")))

Does that really work for you?  mode-line-position is not documented in
Emacs 21 -- are you running 22.0 (CVS)?

-- 
Kevin Rodgers

RE: Changing Color Of Column # In Modeline

[Drew Adams]

     > How about putting this in your init file:
     >
     > (setf mode-line-position '(:eval (if (>= (current-column) 80)
     >                                      '(:propertize "(%l,%c)"
     >                                        face bold)
     >                                    "(%l,%c)")))

    Does that really work for you?  mode-line-position is not
    documented in Emacs 21 -- are you running 22.0 (CVS)?

It works fine in Emacs 22. Yes, `mode-line-position' is undefined in Emacs
21. I use this, BTW:

(setq mode-line-position
          '(:eval (let ((help-echo "mouse-1: select (drag to resize), \
mouse-2: delete others, mouse-3: delete this"))
                    `((-3 ,(propertize "%p" 'help-echo help-echo))
                      (size-indication-mode
                       (8 ,(propertize " of %I" 'help-echo help-echo)))
                      (line-number-mode
                       ((column-number-mode
                         (10 ,(propertize
                               " (%l,%c)"
                               'face (and (> (current-column)
                                             1on1-mode-line-column-limit)
                                          'font-lock-function-name-face)
                               'help-echo help-echo))
                         (6 ,(propertize " L%l" 'help-echo help-echo))))
                       ((column-number-mode
                         (5 ,(propertize
                              " C%c"
                              'face (and (> (current-column)
                                            1on1-mode-line-column-limit)
                                         'font-lock-function-name-face)
                              'help-echo help-echo)))))))))

The key thing here is :eval, which makes sure the column-number face gets
updated - it is available in Emacs 21, as is `mode-line-format', which you
can manipulate in a way similar to the above to change the
`column-number-mode' face.

In Emacs 20, you could use `put' to add the text properties (there is no
`propertize'), but you cannot easily update the face, because there is no
:eval.

Re: Changing Color Of Column # In Modeline

[gamename]

Hi Drew,

I was having similar problems.  I'm using v21 as well.  But how do you
use what you're proposing?  I added it to my init file, then evaluated,
then toggled my major-mode (tcl-mode in this case).  Nothing happened.
What am I missing?

TIA,
-T

RE: Changing Color Of Column # In Modeline

[Drew Adams]

    I was having similar problems.  I'm using v21 as well.  But how do you
    use what you're proposing?  I added it to my init file, then evaluated,
    then toggled my major-mode (tcl-mode in this case).  Nothing happened.
    What am I missing?

The code I sent, like the code that MJF sent, requires Emacs 22, because it
uses variable `mode-line-position'. What I said wrt Emacs 21 was that you
could do something similar in Emacs 21, using variable `mode-line-format'
instead of `mode-line-position'.

The following works in Emacs 21. I just took the default value for
`mode-line-format' (defined in bindings.el), wrapped it in (:eval...), and
added the conditional face expression for `column-number-mode'.

(defcustom my-column-limit 70
  "When current column is > this, column is highlighted in mode-line."
  :type 'integer :group 'convenience)

(setq mode-line-format
      '(:eval
        (let* ((help-echo
                "mouse-1: select window, mouse-2: \
delete others, mouse-3: delete ...")
               (dashes (propertize "--" 'help-echo help-echo)))
          (list
           (propertize "-" 'help-echo help-echo)
           'mode-line-mule-info
           'mode-line-modified
           'mode-line-frame-identification
           'mode-line-buffer-identification
           (propertize "   " 'help-echo help-echo)
           'global-mode-string
           (propertize "   %[(" 'help-echo help-echo)
           '(:eval (mode-line-mode-name))
           'mode-line-process
           'minor-mode-alist
           (propertize "%n" 'help-echo "mouse-2: widen"
                       'local-map (make-mode-line-mouse-map
                                   'mouse-2 #'mode-line-widen))
           (propertize ")%]--" 'help-echo help-echo)
           `(which-func-mode ("" which-func-format ,dashes))
           `(line-number-mode
             (,(propertize "L%l" 'help-echo help-echo) ,dashes))
           `(column-number-mode
             (,(propertize
                "C%c"
                'face (and (> (current-column) 50) 'bold)
                'help-echo help-echo)
              ,dashes))
           `(-3 . ,(propertize "%p" 'help-echo help-echo))
           (propertize "-%-" 'help-echo help-echo)))))

Note: You could, alternatively, put the (:eval ...) around only the
column-number-mode stuff, but then you would also need to substitute the
values for `help-echo' and `dashes' (because they would be quoted inside the
'(:eval ...), so they wouldn't pick up the values from the `let'). IOW, you
could remove the (:eval ...) from around the `let' above, and do this in
place of the (column-number-mode...) stuff:

'(:eval `(column-number-mode
          (,(propertize
             "C%c"
             'face (and (> (current-column) 50) 'bold)
             'help-echo "mouse-1: select window,....")
           ,(propertize "--" 'help-echo "mouse-1: select window,..."))))

That's maybe (maybe not) a bit more understandable, if a bit redundant. If
you don't care about the `help-echo' strings, then that becomes much
simpler:

'(:eval `(column-number-mode
          (,(propertize "C%c" 'face (and (> (current-column) 50) 'bold))
           "--")))

And don't forget to turn on `column-number-mode': (column-number-mode 1)
;-).

HTH. - Drew

Re: Changing Color Of Column # In Modeline

[rgb]

> <rbielaws@i1.net>], who wrote in article <1132680280.003922.155730@g47g2000cwa.googlegroups.com>:
> > > Is that possible?  Does anyone have a code snippet which does that or
> > > something similar?
> >
> > http://www.emacswiki.org/cgi-bin/wiki/ColumnMarker
>
> This one looks too restrictive.  Some time ago I wrote this:
> ...
>
> Hope this helps,
> Ilya

I always knew it should be done that way but I never use tabs or
multi-column characters so it's been low on my to-do list.  Perhaps
now I can knock that item off my list.
Thanks.

RE: Changing Color Of Column # In Modeline

[Drew Adams]

    > > http://www.emacswiki.org/cgi-bin/wiki/ColumnMarker
    >
    > This one looks too restrictive.  Some time ago I wrote this:
    > Ilya

    I always knew it should be done that way but I never use tabs or
    multi-column characters so it's been low on my to-do list. Perhaps
    now I can knock that item off my list.

Well, "should be done that way" is not so clear, to me. I see different
advantages with RGB's code and Ilya's code:

 - RGB's code lets you easily highlight multiple columns (with different
faces), move those columns, and turn their highlighting on/off

 - Ilya's code treats multiple-column characters such as TAB correctly

Of course, Ilya's code might be made more flexible, by wrapping it in
commands that provide the advantages of RGB's code.

For reference (for those who lost the thread), here is Ilya's code, with a
variable substituted for `79', tabs untabified, and `secondary-selection'
quoted (so it will also work in Emacs 20):

(defvar limit-column 30)

(defun match-at-column (end)
  (let (done c res)
    (while (and (not done) (< (point) end))
      (cond ((< limit-column (current-column)) (forward-line 1))
            ((< limit-column (move-to-column (1+ limit-column)))
             (setq done t res t)
             (forward-char -1)
             (re-search-forward "."))
            ((eobp) (setq done t))
            (t (forward-line 1))))
    res))

(add-hook 'font-lock-mode-hook
          (lambda ()
            (font-lock-add-keywords
             nil
             '((match-at-column 0 'secondary-selection t))
             'append)))

Re: Changing Color Of Column # In Modeline

[gamename]

Hi Drew,

Thanks for your reply.

Well, I tried using the first emacs 21 example above and then
eventually all of them in the last post.  After evaluating it, I would
toggle "tcl-mode", "which-func-mode", and even "font-lock-mode" in
various combinations as well as simply exiting emacs and restarting it.
  No luck.  The column value still remains in the same font/weight no
matter what column I have the cursor on.

Any ideas what I may be doing incorrectly?

TIA,
-T

RE: Changing Color Of Column # In Modeline

[Drew Adams]

    Well, I tried using the first emacs 21 example above and then
    eventually all of them in the last post.  After evaluating it, I would
    toggle "tcl-mode", "which-func-mode", and even "font-lock-mode" in
    various combinations as well as simply exiting emacs and restarting it.
      No luck.  The column value still remains in the same font/weight no
    matter what column I have the cursor on.

    Any ideas what I may be doing incorrectly?

I tested it in GNU Emacs 21.3.1 (i386-mingw-nt5.1.2600) of 2004-03-10 on
NYAUMO. Did you use emacs -q? Do that first (always), to be sure there is
not something else in your environment that is interfering. If it works with
emacs -q but it doesn't work when you load your init file, then email me
off-list and we can try to figure out what the problem is.

I suspect that the problem might be that I showed you `setq', not
`setq-default'. The former only turns this on for the current buffer; the
latter makes it the default behavior. Which one you use depends on how you
want to use this (e.g. in a certain mode hook or systematically). If you
just want this on all the time by default, then use `setq-default'.

1. emacs -q

2. Paste the code (from my email of 11/23 at 10:22) into buffer *scratch*.
That is, the first assignment to mode-line-format (the long one from my
email).

3. M-x eval-buffer

4. C-u M-x column-number-mode

>From then on, whenever the cursor is in column 51 or greater, the column
indicator in the mode line should be bold.

(The hard-coded `50' should ultimately be changed to a user option such as
the `my-column-limit' I provided.)

HTH.

Re: Changing Color Of Column # In Modeline

[gamename]

Hi Drew,

Thanks for all your help.

Well, I tried the v21 suggestions in various combinations andstill the
column #s aren't changing in font/size/weight/color.   I've evaluated
the above code (in various combinations), toggled tcl-mode, and also
font-lock-mode as well.

The specific version I'm using is: GNU Emacs 21.2.95.2

Got any idea what I'm doing incorrectly? ;-)

-T

RE: Changing Color Of Column # In Modeline

[Drew Adams]

    Well, I tried the v21 suggestions in various combinations andstill the
    column #s aren't changing in font/size/weight/color.   I've evaluated
    the above code (in various combinations), toggled tcl-mode, and also
    font-lock-mode as well.

    The specific version I'm using is: GNU Emacs 21.2.95.2

    Got any idea what I'm doing incorrectly? ;-)

Sorry, beyond what I said earlier, I don't really know what to say that
might help.

It works for me in 21.3.1. I don't have 21.2.95.2 to test with. Check the
doc for 21.2.95.2 - look in the Emacs-Lisp manual (`C-h i') to see if
"(:eval...)" is supported (just search for ":eval" - if it's not there, then
it's probably not supported).

It is not supported in Emacs 20 (which I use most of the time); it may not
be supported in 21.2.95.2 either - in that case, you're out of luck.

I assume that you already tried without your .emacs file, using emacs -q,
correct?

Re: Changing Color Of Column # In Modeline

[gamename]

Hi Drew,

The Nov 26, 10:33 am post is redundant.  I posted it because I'm using
the Google frontend for usenet and it didn't update for about 36 hours.
 Consequently, I double-posted thinking my first one was lost.

Sorry for the confusion everyone. 

-T