Re: Emacs with GNUstep

[Andreas Schwab <schwab@linux-m68k.org>]

This should fix it.

Andreas.

diff --git a/configure.ac b/configure.ac
index 429443c..2f1124d 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1475,8 +1475,8 @@ tmp_CPPFLAGS="$CPPFLAGS"
 tmp_CFLAGS="$CFLAGS"
 CPPFLAGS="$CPPFLAGS -x objective-c"
 CFLAGS="$CFLAGS -x objective-c"
-TEMACS_LDFLAGS2="\${LDFLAGS}"
 GNU_OBJC_CFLAGS=
+LIBS_GNUSTEP=
 if test "${with_ns}" != no; then
   if test "${opsys}" = darwin; then
      NS_IMPL_COCOA=yes
@@ -1503,9 +1503,9 @@ if test "${with_ns}" != no; then
      CPPFLAGS="$CPPFLAGS -I${GNUSTEP_SYSTEM_HEADERS} ${GNUSTEP_LOCAL_HEADERS}"
      CFLAGS="$CFLAGS -I${GNUSTEP_SYSTEM_HEADERS} ${GNUSTEP_LOCAL_HEADERS}"
      LDFLAGS="$LDFLAGS -L${GNUSTEP_SYSTEM_LIBRARIES} ${GNUSTEP_LOCAL_LIBRARIES}"
+     LIBS_GNUSTEP="-lgnustep-gui -lgnustep-base -lobjc -lpthread"
      LIB_STANDARD=
      START_FILES=
-     TEMACS_LDFLAGS2=
      dnl GNUstep defines BASE_NATIVE_OBJC_EXCEPTIONS to 0 or 1.
      dnl If they had chosen to either define it or not, we could have
      dnl just used AC_CHECK_DECL here.
@@ -1556,7 +1556,7 @@ fail;
   fi
 fi
 
-AC_SUBST(TEMACS_LDFLAGS2)
+AC_SUBST(LIBS_GNUSTEP)
 
 INSTALL_ARCH_INDEP_EXTRA=install-etc
 ns_self_contained=no
@@ -4287,10 +4287,6 @@ case "$opsys" in
   *) LD_SWITCH_SYSTEM_TEMACS= ;;
 esac
 
-if test "$NS_IMPL_GNUSTEP" = "yes"; then
-  LD_SWITCH_SYSTEM_TEMACS="${LD_SWITCH_SYSTEM_TEMACS} -L${GNUSTEP_SYSTEM_LIBRARIES} ${GNUSTEP_LOCAL_LIBRARIES} -lgnustep-gui -lgnustep-base -lobjc -lpthread"
-fi
-
 AC_SUBST(LD_SWITCH_SYSTEM_TEMACS)
 
 
diff --git a/src/Makefile.in b/src/Makefile.in
index 0e91eae..96b1d6d 100644
--- a/src/Makefile.in
+++ b/src/Makefile.in
@@ -111,9 +111,6 @@ LD_SWITCH_SYSTEM_TEMACS=@LD_SWITCH_SYSTEM_TEMACS@
 ## Flags to pass to ld only for temacs.
 TEMACS_LDFLAGS = $(LD_SWITCH_SYSTEM) $(LD_SWITCH_SYSTEM_TEMACS)
 
-## $LDFLAGS or empty if NS_IMPL_GNUSTEP (for some reason).
-TEMACS_LDFLAGS2 = @TEMACS_LDFLAGS2@
-
 ## If available, the full path to the paxctl program.
 ## On grsecurity/PaX systems, unexec will fail due to a gap between
 ## the bss section and the heap.  This can be prevented by disabling
@@ -230,6 +227,9 @@ LIBX_OTHER=@LIBX_OTHER@
 ## configure, which should set it to nil in non-X builds.
 LIBX_BASE=$(LIBXMENU) $(LD_SWITCH_X_SITE)
 
+## Only used for GNUstep
+LIBS_GNUSTEP=@LIBS_GNUSTEP@
+
 LIBSOUND= @LIBSOUND@
 CFLAGS_SOUND= @CFLAGS_SOUND@
 
@@ -400,7 +400,7 @@ otherobj= $(TERMCAP_OBJ) $(PRE_ALLOC_OBJ) $(GMALLOC_OBJ) $(RALLOC_OBJ) \
 ## Note that SunOS needs -lm to come before -lc; otherwise, you get
 ## duplicated symbols.  If the standard libraries were compiled
 ## with GCC, we might need LIB_GCC again after them.
-LIBES = $(LIBS) $(W32_LIBS) $(LIBX_BASE) $(LIBIMAGE) \
+LIBES = $(LIBS) $(W32_LIBS) $(LIBS_GNUSTEP) $(LIBX_BASE) $(LIBIMAGE) \
    $(LIBX_OTHER) $(LIBSOUND) \
    $(RSVG_LIBS) $(IMAGEMAGICK_LIBS) $(LIB_CLOCK_GETTIME) \
    $(LIB_EACCESS) $(LIB_TIMER_TIME) $(DBUS_LIBS) \
@@ -475,7 +475,7 @@ $(lib)/libgnu.a: $(config_h)
 
 temacs$(EXEEXT): $(START_FILES) stamp-oldxmenu $(obj) $(otherobj) \
 	         $(lib)/libgnu.a $(W32_RES)
-	$(CC) $(LD_FIRSTFLAG) $(ALL_CFLAGS) $(TEMACS_LDFLAGS) $(TEMACS_LDFLAGS2) \
+	$(CC) $(LD_FIRSTFLAG) $(ALL_CFLAGS) $(TEMACS_LDFLAGS) $(LDFLAGS) \
 	  -o temacs $(START_FILES) $(obj) $(otherobj) $(lib)/libgnu.a $(LIBES) \
 	  $(W32_RES_LINK)
 	test "$(CANNOT_DUMP)" = "yes" || \

-- 
Andreas Schwab, schwab@linux-m68k.org
GPG Key fingerprint = 58CA 54C7 6D53 942B 1756  01D3 44D5 214B 8276 4ED5
"And now for something completely different."