unofficial mirror of emacs-devel@gnu.org 
 help / color / mirror / code / Atom feed
* insert-file-name-into-minibuffer
@ 2019-02-09 14:39 Alexander Klimov
  2019-02-09 14:50 ` insert-file-name-into-minibuffer Eli Zaretskii
  2019-02-17  7:09 ` insert-file-name-into-minibuffer Marcin Borkowski
  0 siblings, 2 replies; 9+ messages in thread
From: Alexander Klimov @ 2019-02-09 14:39 UTC (permalink / raw)
  To: emacs-devel

It is quite common to insert the name of the current file into the 
argument of shell-command or compile command (both use 
read-shell-command). I wonder what it the preferred way to do it?

I currently use the following to allow M-. or C-u M-. to be used to
insert the file name or its full path:

(defun insert-file-name-into-minibuffer (full-path)
  (interactive "P")
  (let ((path (buffer-file-name (window-buffer (minibuffer-selected-window)))))
    (insert (if full-path
                path
              (file-name-nondirectory path)))))
(define-key minibuffer-local-map (kbd "M-.") 'insert-file-name-into-minibuffer)

-- 
Regards,
ASK



^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: insert-file-name-into-minibuffer
  2019-02-09 14:39 insert-file-name-into-minibuffer Alexander Klimov
@ 2019-02-09 14:50 ` Eli Zaretskii
  2019-02-09 21:30   ` insert-file-name-into-minibuffer Alexander Klimov
  2019-02-17  7:09 ` insert-file-name-into-minibuffer Marcin Borkowski
  1 sibling, 1 reply; 9+ messages in thread
From: Eli Zaretskii @ 2019-02-09 14:50 UTC (permalink / raw)
  To: Alexander Klimov; +Cc: emacs-devel

> Date: Sat, 9 Feb 2019 14:39:36 +0000
> From: Alexander Klimov <alserkli@inbox.ru>
> 
> It is quite common to insert the name of the current file into the 
> argument of shell-command or compile command (both use 
> read-shell-command). I wonder what it the preferred way to do it?

Doesn't M-n in the minibuffer already do that?



^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: insert-file-name-into-minibuffer
  2019-02-09 14:50 ` insert-file-name-into-minibuffer Eli Zaretskii
@ 2019-02-09 21:30   ` Alexander Klimov
  2019-02-09 21:38     ` insert-file-name-into-minibuffer Marcin Borkowski
  0 siblings, 1 reply; 9+ messages in thread
From: Alexander Klimov @ 2019-02-09 21:30 UTC (permalink / raw)
  To: emacs-devel

On Sat, 9 Feb 2019, Eli Zaretskii wrote:
> > It is quite common to insert the name of the current file into the 
> > argument of shell-command or compile command (both use 
> > read-shell-command). I wonder what it the preferred way to do it?
> 
> Doesn't M-n in the minibuffer already do that?

Thanks, never knew it works in read-shell-command this way!

OTOH, next-history-element replaces the whole line even if one 
already typed `gcc ...' and does not allow to insert the file name 
with full path.

Speaking of buffer file names, probably there should also be a more 
direct way to copy the full path of the current file than C-x C-f M-n 
C-S-backspace.

-- 
Regards,
ASK



^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: insert-file-name-into-minibuffer
  2019-02-09 21:30   ` insert-file-name-into-minibuffer Alexander Klimov
@ 2019-02-09 21:38     ` Marcin Borkowski
  2019-02-09 21:50       ` insert-file-name-into-minibuffer Alexander Klimov
  0 siblings, 1 reply; 9+ messages in thread
From: Marcin Borkowski @ 2019-02-09 21:38 UTC (permalink / raw)
  To: Alexander Klimov; +Cc: emacs-devel


On 2019-02-09, at 22:30, Alexander Klimov <alserkli@inbox.ru> wrote:

> On Sat, 9 Feb 2019, Eli Zaretskii wrote:
>> > It is quite common to insert the name of the current file into the 
>> > argument of shell-command or compile command (both use 
>> > read-shell-command). I wonder what it the preferred way to do it?
>> 
>> Doesn't M-n in the minibuffer already do that?
>
> Thanks, never knew it works in read-shell-command this way!
>
> OTOH, next-history-element replaces the whole line even if one 
> already typed `gcc ...' and does not allow to insert the file name 
> with full path.
>
> Speaking of buffer file names, probably there should also be a more 
> direct way to copy the full path of the current file than C-x C-f M-n 
> C-S-backspace.

Not entirely what you're looking for, but are you aware of `w', `C-u w'
and `C-u 0 w' in Dired?

Hth,

-- 
Marcin Borkowski
http://mbork.pl



^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: insert-file-name-into-minibuffer
  2019-02-09 21:38     ` insert-file-name-into-minibuffer Marcin Borkowski
@ 2019-02-09 21:50       ` Alexander Klimov
  2019-02-09 21:59         ` insert-file-name-into-minibuffer Marcin Borkowski
  0 siblings, 1 reply; 9+ messages in thread
From: Alexander Klimov @ 2019-02-09 21:50 UTC (permalink / raw)
  To: emacs-devel

On Sat, 9 Feb 2019, Marcin Borkowski wrote:
> > Speaking of buffer file names, probably there should also be a more 
> > direct way to copy the full path of the current file than C-x C-f M-n 
> > C-S-backspace.
> 
> Not entirely what you're looking for, but are you aware of `w', `C-u w'
> and `C-u 0 w' in Dired?

Yes (M-0 w), but opening Dired (BTW, dired-jump is not bound to C-x 
C-j in `emacs -Q') is likely even less direct.

-- 
Regards,
ASK



^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: insert-file-name-into-minibuffer
  2019-02-09 21:50       ` insert-file-name-into-minibuffer Alexander Klimov
@ 2019-02-09 21:59         ` Marcin Borkowski
  2019-02-09 22:19           ` insert-file-name-into-minibuffer Alexander Klimov
  0 siblings, 1 reply; 9+ messages in thread
From: Marcin Borkowski @ 2019-02-09 21:59 UTC (permalink / raw)
  To: Alexander Klimov; +Cc: emacs-devel


On 2019-02-09, at 22:50, Alexander Klimov <alserkli@inbox.ru> wrote:

> On Sat, 9 Feb 2019, Marcin Borkowski wrote:
>> > Speaking of buffer file names, probably there should also be a more 
>> > direct way to copy the full path of the current file than C-x C-f M-n 
>> > C-S-backspace.
>> 
>> Not entirely what you're looking for, but are you aware of `w', `C-u w'
>> and `C-u 0 w' in Dired?
>
> Yes (M-0 w), but opening Dired (BTW, dired-jump is not bound to C-x 
> C-j in `emacs -Q') is likely even less direct.

Of course, but I thought it might be useful for others reading this.
(And BTW, I fully agree that your use case is legitimate and not covered
by M-n.  Otoh, I often run shell commands from Dired, so it's not that
indirect for me.)

Best,

-- 
Marcin Borkowski
http://mbork.pl



^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: insert-file-name-into-minibuffer
  2019-02-09 21:59         ` insert-file-name-into-minibuffer Marcin Borkowski
@ 2019-02-09 22:19           ` Alexander Klimov
  2019-02-13 18:49             ` insert-file-name-into-minibuffer Marcin Borkowski
  0 siblings, 1 reply; 9+ messages in thread
From: Alexander Klimov @ 2019-02-09 22:19 UTC (permalink / raw)
  To: emacs-devel

On Sat, 9 Feb 2019, Marcin Borkowski wrote:
> > Yes (M-0 w), but opening Dired (BTW, dired-jump is not bound to C-x 
> > C-j in `emacs -Q') is likely even less direct.
> 
> Of course, but I thought it might be useful for others reading this.

I use

(defun copy-buffer-file-name-as-kill (&optional nondirectory)
  (interactive "P")
  (let ((f (buffer-file-name)))
    (when nondirectory
      (setq f (file-name-nondirectory f)))
    (kill-new f)
    (message "%s" f)))

IMO it would be nice to have something like this bound to some key in 
`emacs -Q'; as well as something like insert-file-name-into-minibuffer
because it is common to recall that you need the buffer file name only 
once you already started typing the compilation command. Furthermore, 
M-n does not insert buffer file name in M-x compile.

-- 
Regards,
ASK



^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: insert-file-name-into-minibuffer
  2019-02-09 22:19           ` insert-file-name-into-minibuffer Alexander Klimov
@ 2019-02-13 18:49             ` Marcin Borkowski
  0 siblings, 0 replies; 9+ messages in thread
From: Marcin Borkowski @ 2019-02-13 18:49 UTC (permalink / raw)
  To: Alexander Klimov; +Cc: emacs-devel


On 2019-02-09, at 23:19, Alexander Klimov <alserkli@inbox.ru> wrote:

> On Sat, 9 Feb 2019, Marcin Borkowski wrote:
>> > Yes (M-0 w), but opening Dired (BTW, dired-jump is not bound to C-x 
>> > C-j in `emacs -Q') is likely even less direct.
>> 
>> Of course, but I thought it might be useful for others reading this.
>
> I use
>
> (defun copy-buffer-file-name-as-kill (&optional nondirectory)
>   (interactive "P")
>   (let ((f (buffer-file-name)))
>     (when nondirectory
>       (setq f (file-name-nondirectory f)))
>     (kill-new f)
>     (message "%s" f)))

Nice, and really useful!  I'm going to put it in my init.el, thanks.

> IMO it would be nice to have something like this bound to some key in 
> `emacs -Q'; as well as something like insert-file-name-into-minibuffer
> because it is common to recall that you need the buffer file name only 
> once you already started typing the compilation command. Furthermore, 
> M-n does not insert buffer file name in M-x compile.

+1

-- 
Marcin Borkowski
http://mbork.pl



^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: insert-file-name-into-minibuffer
  2019-02-09 14:39 insert-file-name-into-minibuffer Alexander Klimov
  2019-02-09 14:50 ` insert-file-name-into-minibuffer Eli Zaretskii
@ 2019-02-17  7:09 ` Marcin Borkowski
  1 sibling, 0 replies; 9+ messages in thread
From: Marcin Borkowski @ 2019-02-17  7:09 UTC (permalink / raw)
  To: Alexander Klimov; +Cc: emacs-devel


On 2019-02-09, at 15:39, Alexander Klimov <alserkli@inbox.ru> wrote:

> It is quite common to insert the name of the current file into the 
> argument of shell-command or compile command (both use 
> read-shell-command). I wonder what it the preferred way to do it?
>
> I currently use the following to allow M-. or C-u M-. to be used to
> insert the file name or its full path:
>
> (defun insert-file-name-into-minibuffer (full-path)
>   (interactive "P")
>   (let ((path (buffer-file-name (window-buffer (minibuffer-selected-window)))))
>     (insert (if full-path
>                 path
>               (file-name-nondirectory path)))))
> (define-key minibuffer-local-map (kbd "M-.") 'insert-file-name-into-minibuffer)

Hi, it seems I reinvented your code and written about it on my blog:
http://mbork.pl/2019-02-17_Inserting_the_current_file_name_at_point
(don't worry, you get the credit).  Thanks again!

Best,

-- 
Marcin Borkowski
http://mbork.pl



^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2019-02-17  7:09 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-02-09 14:39 insert-file-name-into-minibuffer Alexander Klimov
2019-02-09 14:50 ` insert-file-name-into-minibuffer Eli Zaretskii
2019-02-09 21:30   ` insert-file-name-into-minibuffer Alexander Klimov
2019-02-09 21:38     ` insert-file-name-into-minibuffer Marcin Borkowski
2019-02-09 21:50       ` insert-file-name-into-minibuffer Alexander Klimov
2019-02-09 21:59         ` insert-file-name-into-minibuffer Marcin Borkowski
2019-02-09 22:19           ` insert-file-name-into-minibuffer Alexander Klimov
2019-02-13 18:49             ` insert-file-name-into-minibuffer Marcin Borkowski
2019-02-17  7:09 ` insert-file-name-into-minibuffer Marcin Borkowski

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).