@c This is part of the Emacs manual.
@c Copyright (C) 1985-1987, 1993-1995, 1997, 2000-2018 Free Software
@c Foundation, Inc.
@c See file emacs.texi for copying conditions.
@node Packages
@chapter Emacs Lisp Packages
@cindex Package
@cindex Emacs Lisp package archive
@cindex Package archive

Emacs includes a facility that lets you easily download and install
@dfn{packages} that implement additional features.  Each package is a
separate Emacs Lisp program, sometimes including other components such
as an Info manual.

  @kbd{M-x list-packages} brings up a buffer named @file{*Packages*}
with a list of all packages.  You can install or uninstall packages
via this buffer.  @xref{Package Menu}.

  The command @kbd{C-h P} (@code{describe-package}) prompts for the
name of a package, and displays a help buffer describing the
attributes of the package and the features that it implements.

  By default, Emacs downloads packages from a @dfn{package archive}
maintained by the Emacs developers and hosted by the GNU project.
Optionally, you can also download packages from archives maintained by
third parties.  @xref{Package Installation}.

  For information about turning an Emacs Lisp program into an
installable package, @xref{Packaging,,,elisp, The Emacs Lisp Reference
Manual}.

@menu
* Package Menu::         Buffer for viewing and managing packages.
* Package Installation:: Options for package installation.
* Package Files::        Where packages are installed.
@end menu

@node Package Menu
@section The Package Menu Buffer
@cindex package menu
@cindex built-in package
@findex list-packages

The command @kbd{M-x list-packages} brings up the @dfn{package menu}.
This is a buffer listing all the packages that Emacs knows about, one
on each line, with the following information:

@itemize @bullet
@item
The package name (e.g., @samp{auctex}).

@item
The package's version number (e.g., @samp{11.86}).

@item
The package's status---normally one of @samp{available} (can be
downloaded from the package archive), @samp{installed},
@c @samp{unsigned} (installed, but not signed; @pxref{Package Signing}),
or @samp{built-in} (included in Emacs by default).  The status
@samp{external} means the package is not built-in and not from the
directory specified by @code{package-user-dir} (@pxref{Package
Files}).  External packages are treated much like built-in: they
cannot be deleted through the package menu, and are not considered for
upgrading.

The status can also be @samp{new}.  This is equivalent to
@samp{available}, except that it means the package became newly
available on the package archive after your last invocation of
@kbd{M-x list-packages}.  In other instances, a package may have the
status @samp{held}, @samp{disabled}, or @samp{obsolete}.
@xref{Package Installation}.

@item
A short description of the package.
@end itemize

@noindent
The @code{list-packages} command accesses the network, to retrieve the
list of available packages from package archive servers.  If the
network is unavailable, it falls back on the most recently retrieved
list.

The following commands are available in the package menu:

@table @kbd
@item h
Print a short message summarizing how to use the package menu
(@code{package-menu-quick-help}).

@item ?
@itemx @key{RET}
Display a help buffer for the package on the current line
(@code{package-menu-describe-package}), similar to the help window
displayed by the @kbd{C-h P} command (@pxref{Packages}).

@item i
Mark the package on the current line for installation
(@code{package-menu-mark-install}).  If the package status is
@samp{available}, this adds an @samp{I} character to the start of the
line; typing @kbd{x} (see below) will download and install the
package.

@item d
Mark the package on the current line for deletion
(@code{package-menu-mark-delete}).  If the package status is
@samp{installed}, this adds a @samp{D} character to the start of the
line; typing @kbd{x} (see below) will delete the package.
@xref{Package Files}, for information about what package deletion
entails.

@item ~
Mark all obsolete packages for deletion
(@code{package-menu-mark-obsolete-for-deletion}).  This marks for
deletion all the packages whose status is @samp{obsolete}.

@item u
@itemx @key{DEL}
Remove any installation or deletion mark previously added to the
current line by an @kbd{i} or @kbd{d} command.

@item U
Mark all package with a newer available version for upgrading
(@code{package-menu-mark-upgrades}).  This places an installation mark
on the new available versions, and a deletion mark on the old
installed versions.

@item x
@vindex package-menu-async
Download and install all packages marked with @kbd{i}, and their
dependencies; also, delete all packages marked with @kbd{d}
(@code{package-menu-execute}).  This also removes the marks.

@item r
Refresh the package list (@code{package-menu-refresh}).  This fetches
the list of available packages from the package archive again, and
recomputes the package list.

@item f
Filter the package list (@code{package-menu-filter}).  This prompts
for a keyword (e.g., @samp{games}), then shows only the packages
that relate to that keyword.  To restore the full package list,
type @kbd{q}.

@item H
Permanently hide packages that match a regexp
(@code{package-menu-hide-package}).

@item (
Toggle visibility of old versions of packages and also of versions
from lower-priority archives (@code{package-menu-toggle-hiding}).
@end table

@noindent
For example, you can install a package by typing @kbd{i} on the line
listing that package, followed by @kbd{x}.

@node Package Installation
@section Package Installation

@findex package-install
  Packages are most conveniently installed using the package menu
(@pxref{Package Menu}), but you can also use the command @kbd{M-x
package-install}.  This prompts for the name of a package with the
@samp{available} status, then downloads and installs it.

@cindex package requirements
  A package may @dfn{require} certain other packages to be installed,
because it relies on functionality provided by them.  When Emacs
installs such a package, it also automatically downloads and installs
any required package that is not already installed.  (If a required
package is somehow unavailable, Emacs signals an error and stops
installation.)  A package's requirements list is shown in its help
buffer.

@vindex package-archives
  By default, packages are downloaded from a single package archive
maintained by the Emacs developers.  This is controlled by the
variable @code{package-archives}, whose value is a list of package
archives known to Emacs.  Each list element must have the form
@code{(@var{id} . @var{location})}, where @var{id} is the name of a
package archive and @var{location} is the @acronym{HTTP} address or
name of the package archive directory.  You can alter this list if you
wish to use third party package archives---but do so at your own risk,
and use only third parties that you think you can trust!

@anchor{Package Signing}
@cindex package security
@cindex package signing
  The maintainers of package archives can increase the trust that you
can have in their packages by @dfn{signing} them.  They generate a
private/public pair of cryptographic keys, and use the private key to
create a @dfn{signature file} for each package.  With the public key, you
can use the signature files to verify the package creator and make sure
the package has not been tampered with.  Signature verification uses
@uref{https://www.gnupg.org/, the GnuPG package} via the EasyPG
interface (@pxref{Top,, EasyPG, epa, Emacs EasyPG Assistant Manual}).
A valid signature is not a cast-iron
guarantee that a package is not malicious, so you should still
exercise caution.  Package archives should provide instructions
on how you can obtain their public key.  One way is to download the
key from a server such as @url{https://pgp.mit.edu/}.
Use @kbd{M-x package-import-keyring} to import the key into Emacs.
Emacs stores package keys in the directory specified by the variable
@code{package-gnupghome-dir}, by default in the @file{gnupg}
subdirectory of @code{package-user-dir}, which causes Emacs to invoke
GnuPG with the option @samp{--homedir} when verifying signatures.
If @code{package-gnupghome-dir} is @code{nil}, GnuPG's option
@samp{--homedir} is omitted.
The public key for the GNU package archive is distributed with Emacs,
in the @file{etc/package-keyring.gpg}.  Emacs uses it automatically.

@vindex package-check-signature
@vindex package-unsigned-archives
  If the user option @code{package-check-signature} is non-@code{nil},
Emacs attempts to verify signatures when you install packages.  If the
option has the value @code{allow-unsigned}, you can still install a
package that is not signed.  If you use some archives that do not sign
their packages, you can add them to the list @code{package-unsigned-archives}.

  For more information on cryptographic keys and signing,
@pxref{Top,, GnuPG, gnupg, The GNU Privacy Guard Manual}.
Emacs comes with an interface to GNU Privacy Guard,
@pxref{Top,, EasyPG, epa, Emacs EasyPG Assistant Manual}.

@vindex package-pinned-packages
  If you have more than one package archive enabled, and some of them
offer different versions of the same package, you may find the option
@code{package-pinned-packages} useful.  You can add package/archive
pairs to this list, to ensure that the specified package is only ever
downloaded from the specified archive.

@vindex package-archive-priorities
@vindex package-menu-hide-low-priority
  Another option that is useful when you have several package archives
enabled is @code{package-archive-priorities}.  It specifies the
priority of each archive (higher numbers specify higher priority
archives).  By default, archives have the priority of zero, unless
specified otherwise by this option's value.  Packages from
lower-priority archives will not be shown in the menu, if the same
package is available from a higher-priority archive.  (This is
controlled by the value of @code{package-menu-hide-low-priority}.)

  Once a package is downloaded and installed, it is made available to
the current Emacs session.  Making a package available adds its
directory to @code{load-path} and loads its autoloads.  The effect of
a package's autoloads varies from package to package.  Most packages
just make some new commands available, while others have more
wide-ranging effects on the Emacs session.  For such information,
consult the package's help buffer.

  After a package is installed, it is automatically made available by
Emacs in all subsequent sessions.  This happens at startup, before
processing the init file but after processing the early init file
(@pxref{Early Init File,,, elisp, The Emacs Lisp Reference Manual}).
As an exception, Emacs does not make packages available at startup if
invoked with the @samp{-q} or @samp{--no-init-file} options
(@xref{Initial Options}).

@vindex package-enable-at-startup
  To keep Emacs from automatically making packages available at
startup, change the variable @code{package-enable-at-startup} to
@code{nil}.  You must do this in the early init file (@pxref{Early
Init File,,, elisp, The Emacs Lisp Reference Manual}), as the variable
is read before loading the regular init file.  Currently this variable
cannot be set via Customize.

@findex package-initialize
  If you have set @code{package-enable-at-startup} to @code{nil}, you
can still make packages available either during or after startup.  To
make installed packages available during startup, call the function
@code{package-initialize} in your init file.  To make installed
packages available after startup, invoke the command @kbd{M-x
package-initialize}.

@vindex package-load-list
  For finer control over which packages are made available at startup,
you can use the variable @code{package-load-list}.  Its value should
be a list.  A list element of the form @code{(@var{name}
@var{version})} tells Emacs to make available version @var{version} of
the package named @var{name}.  Here, @var{version} should be a version
string (corresponding to a specific version of the package), or
@code{t} (which means to make available any installed version), or
@code{nil} (which means no version; this disables the package,
preventing it from being made available).  A list element can also be
the symbol @code{all}, which means to make available the latest
installed version of any package not named by the other list elements.
The default value is just @code{'(all)}.

  For example, if you set @code{package-load-list} to @code{'((muse
"3.20") all)}, then Emacs only makes available version 3.20 of the
@samp{muse} package, plus any installed version of packages other than
@samp{muse}.  Any other version of @samp{muse} that happens to be
installed will be ignored.  The @samp{muse} package will be listed in
the package menu with the @samp{held} status.

@node Package Files
@section Package Files and Directory Layout
@cindex package directory

@cindex package file
@findex package-install-file
  Each package is downloaded from the package archive in the form of a
single @dfn{package file}---either an Emacs Lisp source file, or a tar
file containing multiple Emacs Lisp source and other files.  Package
files are automatically retrieved, processed, and disposed of by the
Emacs commands that install packages.  Normally, you will not need to
deal directly with them, unless you are making a package
(@pxref{Packaging,,,elisp, The Emacs Lisp Reference Manual}).  Should
you ever need to install a package directly from a package file, use
the command @kbd{M-x package-install-file}.

@vindex package-user-dir
  Once installed, the contents of a package are placed in a
subdirectory of @file{~/.emacs.d/elpa/} (you can change the name of
that directory by changing the variable @code{package-user-dir}).  The
package subdirectory is named @file{@var{name}-@var{version}}, where
@var{name} is the package name and @var{version} is its version
string.

@cindex system-wide packages
@vindex package-directory-list
  In addition to @code{package-user-dir}, Emacs looks for installed
packages in the directories listed in @code{package-directory-list}.
These directories are meant for system administrators to make Emacs
packages available system-wide; Emacs itself never installs packages
there.  The package subdirectories for @code{package-directory-list}
are laid out in the same way as in @code{package-user-dir}.

  Deleting a package (@pxref{Package Menu}) involves deleting the
corresponding package subdirectory.  This only works for packages
installed in @code{package-user-dir}; if told to act on a package in a
system-wide package directory, the deletion command signals an error.