GNU Emacs NEWS -- history of user-visible changes. Copyright (C) 2022-2024 Free Software Foundation, Inc. See the end of the file for license conditions. Please send Emacs bug reports to 'bug-gnu-emacs@gnu.org'. If possible, use 'M-x report-emacs-bug'. This file is about changes in Emacs version 31. See file HISTORY for a list of GNU Emacs versions and release dates. See files NEWS.30, NEWS.29, ..., NEWS.18, and NEWS.1-17 for changes in older Emacs versions. You can narrow news to a specific version by calling 'view-emacs-news' with a prefix argument or by typing 'C-u C-h C-n'. Temporary note: +++ indicates that all relevant manuals in doc/ have been updated. --- means no change in the manuals is needed. When you add a new item, use the appropriate mark if you are sure it applies, and please also update docstrings as needed. * Installation Changes in Emacs 31.1 ** Changed GCC default options on 32-bit x86 systems. When using GCC 4 or later to build Emacs on 32-bit x86 systems, 'configure' now defaults to using the GCC options '-mfpmath=sse' (if the host system supports SSE2) or '-fno-tree-sra' (if not). These GCC options work around GCC bug 58416, which can cause Emacs to behave incorrectly in rare cases. * Startup Changes in Emacs 31.1 ** When run inside xterm, 'xterm-mouse-mode' is turned on by default. This means that the mouse will work by default inside xterm terminals. If your terminal does not behave properly with xterm mouse tracking enabled, you can disable mouse tracking by putting '(xterm-mouse-mode -1)' in your init file. * Changes in Emacs 31.1 --- ** Child frames are now supported on TTY frames. This supports use-cases like Posframe, Corfu, and child frames acting like tooltips. Other use-cases of child frames are not supported yet. In particular: - trying to create minibuffer-only child frames on a TTY frame will signal an error. - a TTY child frame cannot be converted to a root frame or vice-versa. To enable tooltips on TTY frames, call 'tty-tip-mode'. The presence of child frame support on TTY frames can be checked with `(featurep 'tty-child-frames)'. Recent versions of Posframe and Corfu are known to use child frames on TTYs if they are supported. +++ ** Several font-lock face variables are now obsolete. The following variables are now obsolete: 'font-lock-builtin-face', 'font-lock-comment-delimiter-face', 'font-lock-comment-face', 'font-lock-constant-face', 'font-lock-doc-face', 'font-lock-doc-markup-face', 'font-lock-function-name-face', 'font-lock-keyword-face', 'font-lock-negation-char-face', 'font-lock-preprocessor-face', 'font-lock-string-face', 'font-lock-type-face', 'font-lock-variable-name-face', and 'font-lock-warning-face'. These variables contributed both to confusion about the relation between faces and variables, and to inconsistency when major mode authors used one or the other (sometimes interchangeably). We always recommended using faces directly, and not creating variables going by the same name. If you have customized these variables, you should now customize the corresponding faces instead, using something like: M-x customize-face RET font-lock-string-face RET If you have been using these variables in Lisp code (for example, in font-lock rules), simply quote the symbol, to use the face directly instead of its now-obsolete variable. ** Etags +++ *** New command-line options for handling unrecognized programming languages. The new command-line option '--no-fallback-lang' disables attempts to parse as Fortran or C/C++ files whose programming language 'etags' could not determine. This allows to avoid false positives and reduces the time required to scan directories with many such files. Another new option '--no-empty-file-entries' disables generation of file entries in tags tables for files in which no tags were found. --- ** find-func.el commands now have history enabled. The 'find-function', 'find-library', 'find-face-definition', and 'find-variable' commands now allow retrieving previous input using the usual minibuffer history commands. Each command has a separate history. --- ** New minor mode 'find-function-mode' replaces 'find-function-setup-keys'. ** Minibuffer and Completions +++ *** New user option 'completion-eager-display'. This option configures whether completion commands should display the "*Completions*" buffer immediately. When the option is set to t, all completion commands show "*Completions*" immediately, respectively nil disables the eager display for all commands. The default setting auto enables eager completion only if requested by the command. For more fine-grained control you can also toggle this feature by category using the symbol 'eager-display' in the user option 'completion-category-overrides'. +++ *** New user option 'completion-pcm-leading-wildcard'. This option configures how the partial-completion style does completion. It defaults to nil, which preserves the existing behavior. When it is set to t, the partial-completion style behaves more like the substring style, in that a string being completed can match against a candidate anywhere in the candidate string. +++ *** 'completion-styles' now can contain lists of bindings. In addition to being a symbol naming a completion style, an element of 'completion-styles' can now be a list of the form '(STYLE ((VARIABLE VALUE) ...))' where STYLE is a symbol naming a completion style. VARIABLE will be bound to VALUE (without evaluating it) while the style is executing. This allows multiple references to the same style with different values for completion-affecting variables like 'completion-pcm-leading-wildcard' or 'completion-ignore-case'. This also applies for the styles configuration in 'completion-category-overrides' and 'completion-category-defaults'. --- *** Selected completion candidate is preserved across "*Completions*" updates. When point is on a completion candidate in the "*Completions*" buffer (because of 'minibuffer-next-completion' or for any other reason), point will still be on that candidate after "*Completions*" is updated with a new list of completions. The candidate is automatically deselected when the "*Completions*" buffer is hidden. ** Windows +++ *** New hook 'window-deletable-functions'. This abnormal hook gives its client a way to save a window from getting deleted implicitly by functions like 'kill-buffer', 'bury-buffer' and 'quit-restore-window'. +++ *** New user option 'kill-buffer-quit-windows'. This option has 'kill-buffer' call 'quit-restore-window' to handle the further destiny of any window showing the buffer to be killed. +++ *** New window parameter 'quit-restore-prev'. This parameter is set up by 'display-buffer' when it detects that the window used already has a 'quit-restore' parameter. Its presence gives 'quit-restore-window' a way to undo a sequence of buffer display operations more intuitively. +++ *** 'quit-restore-window' handles new values for BURY-OR-KILL argument. The values 'killing' and 'burying' are like 'kill' and 'bury' but assume that the actual killing or burying of the buffer is done by the caller. +++ *** New user option 'quit-restore-window-no-switch'. With this option set, 'quit-restore-window' will delete its window more aggressively rather than switching to some other buffer in it. --- *** The user option 'display-comint-buffer-action' has been removed. It has been obsolete since Emacs 30.1. Use '(category . comint)' instead. Another user option 'display-tex-shell-buffer-action' has been removed too for which you can use '(category . tex-shell)'. ** Frames +++ *** New function 'frame-deletable-p'. Calling this function before 'delete-frame' is useful to avoid that the latter throws an error when the argument FRAME cannot be deleted. ** Tab Bars and Tab Lines --- *** New abnormal hook 'tab-bar-auto-width-functions'. This hook allows you to control which tab-bar tabs are auto-resized. ** Project --- *** New command 'project-root-find-file'. It is equivalent to running ‘project-any-command’ with ‘find-file’. --- *** The MAYBE-PROMPT argument of 'project-current' can be a string. When such value is used, the 'project-prompter' is called with it as the first argument. This is a way for the callers to indicate, for example, the reason or the context why the project is asked for. ** Registers *** New functions 'buffer-to-register' and 'file-to-register'. These allow users to interactively store file and buffers in registers. Killed buffers stored in a register using 'buffer-to-register' are automatically converted to a file-query value if the buffer was visiting a file. ** IDLWAVE has been moved to GNU ELPA. The version bundled with Emacs is out-of-date, and is now marked as obsolete. Use 'M-x list-packages' to install the 'idlwave' package from GNU ELPA instead. +++ ** New faces 'header-line-active' and 'header-line-inactive'. These inherit from the 'header-line' face, but the faces actually used on the header lines are now these two: the selected window uses 'header-line-active', non-selected windows use 'header-line-inactive'. ** In 'customize-face', the "Font family" attribute now supports completion. * Editing Changes in Emacs 31.1 ** Commands for keyboard translation. 'key-translate' is now interactive. It prompts for a key to translate from, and another to translate to, and sets 'keyboard-translate-table'. The new command 'key-translate-remove' prompts for a key/translation pair with 'completing-read', and removes it from the translation table. ** Internationalization --- *** Emacs now supports Unicode version 16.0. --- *** New input method 'greek-polytonic'. This input method has support for polytonic and archaic Greek characters. --- *** New language-environment and input method for Tifinagh. The Tifinagh script is used to write the Berber languages. --- *** New input methods for Northern Iroquoian languages. Input methods are now implemented for Haudenosaunee languages in the Northern Iroquoian language family: 'mohawk-postfix' (Mohawk [Kanien’kéha / Onkwehonwehnéha]), 'oneida-postfix' (Oneida [Onʌyota:ká: / Ukwehuwehnéha]), 'cayuga-postfix' (Cayuga [Gayogo̱ho:nǫhnéha:ˀ]), 'onondaga-postfix' (Onondaga [Onųdaʔgegáʔ]), and 'seneca-postfix' (Seneca [Onödowá’ga:’]). Additionally, there is a general-purpose 'haudenosaunee-postfix' input method to facilitate writing in the orthographies of the five languages simultaneously. --- ** 'visual-wrap-prefix-mode' now supports variable-pitch fonts. When using 'visual-wrap-prefix-mode' in buffers with variable-pitch fonts, the wrapped text will now be lined up correctly so that it's exactly below the text after the prefix on the first line. --- ** New commands 'unix-word-rubout' and 'unix-filename-rubout'. Unix-words are words separated by whitespace regardless of the buffer's syntax table. In a Unix terminal or shell, 'C-w' kills by Unix-word. The new commands 'unix-word-rubout' and 'unix-filename-rubout' allow you to bind keys to operate more similarly to the terminal. --- ** New user option 'kill-region-dwim'. This option, if non-nil, modifies the fall-back behavior of 'kill-region' ('C-w') if no region is active, and will kill the last word instead of raising an error. Note that if you have disabled Transient Mark mode you might prefer to use 'unix-word-rubout', as this feature relies on there being an active region. --- ** New user option 'delete-pair-push-mark'. This option, if non-nil, makes 'delete-pair' push a mark at the end of the region enclosed by the deleted delimiters. This makes it easy to act on that region. For example, we can highlight it using 'C-x C-x'. +++ ** Electric Pair mode can now pair multiple delimiters at once. You can now insert or wrap text with multiple sets of parentheses and other matching delimiters at once with Electric Pair mode, by providing a prefix argument when inserting one of the delimiters. +++ ** You can now use 'M-~' during 'C-x s' ('save-some-buffers'). Typing 'M-~' while saving some buffers means not to save the buffer and also to mark it as unmodified. This is an alternative way to mark a buffer as unmodified which doesn't require switching to that buffer. ** New minor mode 'delete-selection-local-mode'. This mode sets 'delete-selection-mode' buffer-locally. This can be useful for enabling or disabling the features of 'delete-selection-mode' based on the state of the buffer, such as for the different states of modal editing packages. * Changes in Specialized Modes and Packages in Emacs 31.1 ** Smerge *** New command 'smerge-extend' extends a conflict over surrounding lines. ** Browse URL *** New user option 'browse-url-transform-alist'. This user option is an alist that allows transforming URLs before asking a web browser to load them. For example, it could be used like this: (add-to-list 'browse-url-transform-alist '("www.google.com" . "www.duckduckgo.com")) *** New function 'browse-url-qutebrowser' for the Qutebrowser. For better integration with the Qutebrowser, set 'browse-url(-secondary)-browser-function' to 'browse-url-qutebrowser'. *** Support for the Conkeror web browser has been removed. It has been obsolete since Emacs 28.1. ** CL-Lib +++ *** 'cl-labels' now also accepts '(FUNC EXP)' bindings, like 'cl-flet'. Such bindings make it possible to compute which function to bind to FUNC. ** Whitespace --- *** 'whitespace-cleanup' now adds missing newline at end of file. If 'whitespace-style' includes 'missing-newline-at-eof' (which is the default), the 'whitespace-cleanup' function will now add the newline. ** Gnus --- *** Replying to icalendar events now supports specifying a comment. When called with a prefix argument, accepting, declining, or tentatively accepting an icalendar event will prompt for a comment to add to the response. ** Button +++ *** New function 'unbuttonize-region'. It removes all the buttons in the specified region. +++ *** Disabling 'button-mode' now removes all buttons in the current buffer. ** Shell *** New command to complete the shell history. 'comint-complete-input-ring' ('C-x ') is like 'minibuffer-complete-history' but completes on comint inputs. ** Eshell --- *** New interactive command 'eshell-clear'. This command scrolls the screen so that only the current prompt is visible, optionally erasing all the previous input/output as well. Previously, the Eshell built-in command 'eshell/clear' supported this (e.g., to call it via 'M-x'), but this new command behaves more consistently if you have a partially-typed command at the Eshell prompt. --- *** New user option 'eshell-command-async-buffer'. This option lets you tell 'eshell-command' how to respond if its output buffer is already in use by another invocation of 'eshell-command', much like 'async-shell-command-buffer' does for 'shell-command'. By default, this will prompt for confirmation before creating a new buffer when necessary. To restore the previous behavior, set this option to 'confirm-kill-process'. +++ *** 'eshell-execute-file' is now an interactive command. Interactively, this now prompts for a script file to execute. With the prefix argument, it will also insert any output into the current buffer at point. +++ *** 'eshell-command' and 'eshell-execute-file' can now set where stderr goes. These functions now take an optional ERROR-TARGET argument to control where to send the standard error output. See the "(eshell) Entry Points" node in the Eshell manual for more details. +++ *** You can now loop over ranges of integers with the Eshell 'for' command. When passing a range like 'BEGIN..END' to the Eshell 'for' command, Eshell will now iterate over each integer between BEGIN and END, not including END. +++ *** Conditional statements in Eshell now use an 'else' keyword. Eshell now prefers the following form when writing conditionals: if {conditional} {true-subcommand} else {false-subcommand} The old form (without the 'else' keyword) is retained for compatibility. +++ *** You can now chain conditional statements in Eshell. When using the newly-preferred conditional form in Eshell, you can now chain together multiple 'if'/'else' statements. For more information, see "(eshell) Control Flow" in the Eshell manual. +++ *** Eshell's built-in 'wait' command now accepts a timeout. By passing '-t' or '--timeout', you can specify a maximum time to wait for the processes to exit. Additionally, you can now wait for external processes by passing their PIDs. --- *** New hook 'eshell-after-initialize-hook'. This hook runs after an Eshell session has been fully initialized, immediately before running 'eshell-post-command-hook' for the first time. +++ *** Improved history Isearch. History Isearch in Eshell is reworked. Two new commands 'eshell-isearch-backward-regexp' and 'eshell-isearch-forward-regexp' are added for incrementally searching through the input history. 'eshell-isearch-backward-regexp' is bound to 'M-r' by default, and 'M-s' is freed for normal search commands. If you would like to restore the previous key-bindings for the non-incremental search commands, put in your configuration: (with-eval-after-load 'em-hist (keymap-set eshell-hist-mode-map "M-r" #'eshell-previous-matching-input) (keymap-set eshell-hist-mode-map "M-s" #'eshell-next-matching-input)) +++ *** New user option 'eshell-history-isearch'. When 'eshell-history-isearch' is nil (the default), Isearch commands search in the buffer contents. If you customize it to t, those commands only search in input history. If you customize it to the symbol 'dwim', those commands search in input history only when the point is after the last prompt. ** SHR +++ *** SHR now slices large images into rows. Sliced images allow for more intuitive scrolling up/down by letting you scroll past each slice, instead of jumping past the entire image. Previously, SHR sliced images when zoomed to their original size, no matter how large or small that was. Now, SHR slices any images taller than 'shr-sliced-image-height'. For more information, see the "(eww) Advanced" node in the EWW manual. --- *** You can now customize the image zoom levels to cycle through. By customizing 'shr-image-zoom-levels', you can change the list of zoom levels that SHR cycles through when calling 'shr-zoom-image'. --- *** New user option 'shr-fill-text'. When 'shr-fill-text' is non-nil (the default), SHR will fill text according to the width of the window. If you customize it to nil, SHR will leave the text as-is; in that case, EWW will automatically enable 'visual-line-mode' when displaying a page so that long lines are visually wrapped at word boundaries. ** EWW --- *** EWW now enables 'visual-wrap-prefix-mode' when 'shr-fill-text' is nil. By default, 'shr-fill-text' is t, and EWW fills the text according to the width of the window. If you customize 'shr-fill-text' to nil, EWW will now automatically turn on 'visual-wrap-prefix-mode' in addition to 'visual-line-mode', so that long lines are wrapped at word boundaries near window edge and the continuation lines are indented using prefixes computed from surrounding context. --- *** New user option 'eww-guess-content-type-functions'. The value is a list of functions that EWW should call to determine the content-type of Web pages which don't have a valid 'Content-Type' header. The default value is a function that considers a page with an HTML 'doctype' declaration to have context-type "text/html". ** CC mode +++ *** New type of 'c-offsets-alist' element. The 'cdr' of such an alist element may now be a syntactic symbol. A source line with a syntactic element whose symbol is the 'car' of that alist element is indented as though it were the 'cdr'. +++ *** Enums now have their own syntactic symbols. The new symbols 'enum-open', 'enum-close', 'enum-intro' and 'enum-entry' are used in the analysis of enum constructs. Previously they were given 'brace-list-open', etc. These are fully described in the "(ccmode) Enum Symbols" node of the CC mode manual. +++ *** Enums are now, by default, indented like classes, not brace-lists. To get the old behavior back, add an element '(enum-open . brace-list-open)' to 'c-offsets-alist' in your CC mode style, or amend 'c-offsets-alist' likewise in any of the other ways detailed in the "(ccmode) Config Basics" node of the CC mode manual. ** Go-ts mode +++ *** New unit test commands. Three new commands are now available to run unit tests. The 'go-ts-mode-test-function-at-point' command runs the unit test at point. If a region is active, it runs all the unit tests under the region. It is bound to 'C-c C-t t' in 'go-ts-mode'. The 'go-ts-mode-test-this-file' command runs all unit tests in the current file. It is bound to 'C-c C-t f' in 'go-ts-mode'. The 'go-ts-mode-test-this-package' command runs all unit tests under the package of the current buffer. It is bound to 'C-c C-t p' in 'go-ts-mode'. The 'go-ts-mode-build-tags' user option is available to set a list of build tags for the test commands. ** C-ts mode +++ *** New user option 'c-ts-mode-enable-doxygen'. By default, this is nil, and the Doxygen comment blocks in C/C++ source are highlighted like other comments. When non-nil, Doxygen comment blocks are syntax-highlighted if the Doxygen grammar library is available. ** Java-ts mode +++ *** New user option 'java-ts-mode-enable-doxygen'. By default, this is nil, and the Doxygen comment blocks in Java source are highlighted like other comments. When non-nil, Doxygen comment blocks are syntax-highlighted if the Doxygen grammar library is available. ** Emacs Lisp mode --- *** Checkdoc no longer warns about missing footer lines in some cases. Emacs Lisp libraries have traditionally ended with a footer line (sometimes referred to as "terminating comment"). Their purpose was to easily detect files that had been truncated in transit on ancient and less reliable connections: ;; some-cool-package.el ends here 'checkdoc' will no longer warn if that line is missing for packages that explicitly only support Emacs 30.1 or later, as specified in the "Package-Requires" header. The reason for keeping the warning for packages that support earlier versions of Emacs is that package.el in those versions can't install packages where that line is missing. This change affects both 'M-x checkdoc' and the corresponding flymake backend. --- *** Checkdoc will now flag incorrect formatting in warnings. This affects calls to 'warn', 'lwarn', 'display-warning', and 'message-box'. --- *** The default of 'checkdoc-verb-check-experimental-flag' is now nil. In most cases, having it enabled leads to a large amount of false positives. ** DocView --- *** Dedicated buffer for plain text contents. When switching to the plain text contents with 'doc-view-open-text', DocView now creates a dedicated buffer to display it. 'C-c C-c' gets you back to real DocView buffer if it still exists. +++ *** New commands to save and restore pages in buffer-local registers. Docview can store the current page to buffer-local registers with the new command 'doc-view-page-to-register' (bound to 'm'), and later the stored page can be restored with 'doc-view-jump-to-register' (bound to '''). +++ *** Docview can generate imenu indices for DjVu and ODF documents. When the 'djvused' program is available, Docview can now generate an imenu index for DjVu files from its outline. Indices for Open Document Format (ODF) files as used by OpenOffice and LibreOffice are generated using the 'mutool' program after their initial conversion to PDF format. The name of the 'djvused' program can be customized by changing the user option 'doc-view-djvused-program'. ** Flyspell --- *** New user option 'flyspell-delay-use-timer'. By default, Flyspell waits after so-called "delayed" commands by calling 'sit-for'. If you customize this option to non-nil, Flyspell instead sets up a timer to perform spell-checking after a short delay, which allows idle timers and other code to run during this delay period. We consider making this behavior the default in a future Emacs version, so we invite Flyspell users to enable this new option and report issues. ** Tramp +++ *** Connection method "kubernetes" supports now optional namespace. The host name for Kubernetes connections can be of kind [CONTAINER.]POD[%NAMESPACE], in order to specify the namespace to be used. This overrides the setting in 'tramp-kubernetes-namespace', if any. +++ *** Different proxies for the same destination host name can be specified. A typical example are docker containers, which run on different hosts under the same docker name. When the user option 'tramp-show-ad-hoc-proxies' is non-nil, such ad-hoc multi-hop file names can be used in parallel. Example: on both remote hosts "host1" and "host2" there is a docker container "name", respectively: /ssh:user1@host1|docker:name: /ssh:user2@host2|docker:name: This feature is experimental. ** Diff --- *** New command 'diff-kill-ring-save'. This command copies to the 'kill-ring' a region of text modified according to diffs in the current buffer, but without applying the diffs to the original text. If the selected range extends a hunk, the command attempts to look up and copy the text in-between the hunks. +++ *** New command 'diff-revert-and-kill-hunk' bound to 'C-c M-r'. This command reverts the hunk at point (i.e., applies the reverse of the hunk), and then removes the hunk from the diffs. This is useful to undo or revert changes, committed and uncommitted, when you are in buffers generated by 'C-x v =' and 'C-x v D'. --- *** 'diff-file-prev' and 'diff-hunk-prev' always move to start of header. Previously, 'diff-file-prev' and 'diff-hunk-prev' would move when point is after the corresponding file or hunk header, but not when inside it. Now they will always move to the start of the current header. +++ *** New command 'diff-delete-other-hunks' bound to 'C-c RET n'. This command deletes all hunks other than the current hunk. It is useful to prepare a "*vc-diff*" buffer for committing a single hunk. When the region is active, it deletes all hunks that the region does not overlap. *** 'diff-apply-hunk' now supports creating and deleting files. --- *** 'vc-version-diff' and 'vc-root-version-diff' changed default for REV1. They suggest the previous revision as the default for REV1, not the last one as before. This makes them different from 'vc-diff' and 'vc-root-diff' when those are called without a prefix argument. ** PHP-ts mode --- *** 'php-ts-mode-run-php-webserver' can now accept a custom "php.ini" file. You can use the new optional argument CONFIG when calling 'php-ts-mode-run-php-webserver' to pass an alternative "php.ini" file to the built-in Web server. Interactively, when invoked with a prefix argument, 'php-ts-mode-run-php-webserver' prompts for the config file as well as for other connection parameters. ** Rust-ts mode --- *** New user option 'rust-ts-mode-fontify-number-suffix-as-type'. Rust number literals may have an optional type suffix. When this option is non-nil, this suffix is fontified using 'font-lock-type-face'. ** Ediff +++ *** Ediff's copy commands now apply to all changes with 'C-u' prefix. The Ediff copy commands, bound to 'a', 'b', 'ab', etc., now copy all changes when supplied with a universal prefix argument via 'C-u': - 'C-u a' copies all changes from buffer A to buffer B (in 2-way diff) or to buffer C (in 3-way diff or merge). - 'C-u b' copies all changes from buffer B to buffer A (in 2-way diff) or to buffer C (in 3-way diff or merge). - 'C-u a b' copies all changes from buffer A to buffer B. - 'C-u b a' copies all changes from buffer B to buffer A. - 'C-u a c' copies all changes from buffer A to buffer C. - 'C-u b c' copies all changes from buffer B to buffer C. - 'C-u c a' copies all changes from buffer C to buffer A. - 'C-u c b' copies all changes from buffer C to buffer B. ** Dired +++ *** New user option 'dired-check-symlinks' allows disabling validity checks. Dired uses 'file-truename' to check symbolic link validity when fontifying them, which can be slow for remote directories. Setting 'dired-check-symlinks' to nil disables these checks. Defaults to t, can be set as a connection-local variable. --- *** New user option 'dired-hide-details-hide-absolute-location'. When Dired's 'dired-hide-details-mode' is enabled, also hide the 'default-directory' absolute location, typically displayed as the first line in a Dired buffer. With 'dired-hide-details-hide-absolute-location': project: (100 GiB available) Without 'dired-hide-details-hide-absolute-location': /absolute/path/to/my/important/project: (100 GiB available) --- *** Clicking on base name of directory reverts buffer. When 'dired-make-directory-clickable' is non-nil, clicking on the base name of the directory now reverts the Dired buffer. ** Grep +++ *** Grep results can be edited to reflect changes in the originating file. Like Occur Edit mode, typing 'e' in the "*grep*" buffer will now make the 'grep' results editable. The edits will be reflected in the buffer visiting the originating file. Typing 'C-c C-c' will leave the Grep Edit mode. ** TeX modes +++ *** New Xref backend for TeX modes. The new backend ('tex-etags') is on by default, and improves the functionality of the standard 'xref' commands in TeX buffers. You can restore the standard 'etags' backend with the 'M-x xref-etags-mode' toggle. ** BibTeX mode --- *** New user option 'bibtex-entry-ask-for-key'. When enabled, 'bibtex-entry' asks for a key. ** Midnight mode --- *** Change for activating the mode. Putting '(require 'midnight)' in your init file no longer activates the mode. Now, one needs to say '(midnight-mode +1)' instead. ** Python mode --- *** Prefer "python" for 'python-interpreter' and 'python-shell-interpreter'. On recent versions of mainstream GNU/Linux distributions, "python" either does not exist or it points to Python 3. These user options now default to using "python", falling back to "python3" if it does not exist. If "python" points to Python 2 on your system, you now have to customize these variables to "python3" if you want to use Python 3 instead. --- *** Support of 'electric-layout-mode' added. ** Tmm Menubar --- *** A new shortcut to navigate to previous menu. The hardcoded '^' shortcut gets you back to the previous menu. --- *** New user option 'tmm-shortcut-inside-entry'. When non-nil, highlight the character shortcut in the menu entry's string instead of preprending it and 'tmm-mid-prompt' to said entry. ** Foldout --- *** New command 'foldout-widen-to-current-fold'. This command widens the view to the current fold level when in a fold, or behaves like 'widen' if not in a fold. ** MPC --- *** New user option 'mpc-notifications'. When non-nil, MPC (the Emacs front-end to Music Player Daemon) displays a desktop notification when the song changes, using 'notifications-notify'. The notification's title and body can be customized using the new user options 'mpc-notifications-title' and 'mpc-notifications-body'. --- *** New user option 'mpc-crossfade-time'. When non-nil, MPC will crossfade between songs for the specified number of seconds. Crossfading can be toggled using the command 'mpc-toggle-crossfade' or from the MPC menu. --- *** New command 'mpc-describe-song'. This command displays information about the currently playing song or song at point in the "*MPC-Songs*" buffer. The list of tags to display can be customized using the new user option 'mpc-song-viewer-tags' and the appearance of the list with the new faces 'mpc-song-viewer-tag', 'mpc-song-viewer-value', and 'mpc-song-viewer-empty'. ** VC --- *** Using 'e' from Log View mode to modify change comments now works for Git. --- *** New user option 'vc-allow-rewriting-published-history'. Some VCS commands can change your copy of published change history without warning. In VC we try to detect before that happens, and stop. You can customize this option to permit rewriting history even though Emacs thinks it is dangerous. --- *** 'vc-clone' is now an interactive command. When called interactively, 'vc-clone' now prompts for the remote repository address, and the directory into which to clone the repository. It tries to automatically determine the VC backend for cloning, or prompts for that, too. --- *** 'vc-clone' now accepts an optional argument OPEN-DIR. When the argument is non-nil, the function switches to a buffer visiting the directory into which the repository was cloned. ** Package --- *** New optional argument to 'package-autoremove'. An optional argument NOCONFIRM has been added to 'package-autoremove'. If it is non-nil, or when invoked with a prefix argument, 'package-autoremove' will not prompt the user for confirmation before removing packages. --- *** New prefix argument for 'package-install-selected-packages'. When invoked with a prefix argument, 'package-install-selected-packages' will not prompt the user for confirmation before installing packages. ** Xref --- *** Xref commands that jump to some location use 'display-buffer'. The commands that jump to some location use 'display-buffer' and specify the category 'xref-jump'. As a result, you can customize how the destination window is chosen using 'display-buffer-alist'. Example: (setq display-buffer-alist '(((category . xref-jump) (display-buffer-reuse-window display-buffer-use-some-window) (some-window . mru)))) * New Modes and Packages in Emacs 31.1 * Incompatible Lisp Changes in Emacs 31.1 ** Nested backquotes are not supported any more in Pcase patterns. --- ** The obsolete variable `redisplay-dont-pause' has been removed. ** The 'rx' category name 'chinese-two-byte' must now be spelled correctly. An old alternative name (without the first 'e') has been removed. --- ** All the digit characters now have the 'digit' category. All the characters whose Unicode general-category is Nd now have the 'digit' category, whose mnemonic is '6'. This includes both ASCII and non-ASCII digit characters. --- ** All the symbol characters now have the 'symbol' category. All the characters that belong to the 'symbol' script (according to 'char-script-table') now have the 'symbol' category, whose mnemonic is '5'. ** Some libraries obsolete since Emacs 24.4 and 24.5 have been removed: cc-compat.el, info-edit.el, meese.el, otodo-mode.el, rcompile.el, sup-mouse.el, terminal.el, vi.el, vip.el, ws-mode.el, and yow.el. +++ ** 'if-let' and 'when-let' are now obsolete. Use 'if-let*', 'when-let*' and 'and-let*' instead. This effectively obsoletes the old '(if-let (SYMBOL SOMETHING) ...)' single binding syntax, which we'd kept only for backwards compatibility. --- ** The Eshell 'pwd' command now expands the directory name on all systems. This ensures that user directories are properly expanded to their full name. Previously, Eshell only did this for MS-Windows systems. To restore the old behavior, you can set 'eshell-pwd-convert-function' to 'identity'. * Lisp Changes in Emacs 31.1 ** Time & Date +++ *** 'seconds-to-string' supports new formatting options. Optional arguments are provided to produce human-readable time-duration strings in a variety of formats, for example "6 months 3 weeks" or "5m 52.5s". ** New function 'native-compile-directory'. This function natively-compiles all Lisp files in a directory and in its sub-directories, recursively, which were not already natively-compiled. --- ** New function 'color-blend'. This function takes two RGB lists and optional ALPHA and returns an RGB list whose elements are blended in linear space proportional to ALPHA. +++ ** The 'defcustom' ':local' keyword can now be 'permanent-only'. This means that the variable's 'permanent-local' property is set to t, without marking it as automatically buffer-local. --- ** The obsolete face attribute ':reverse-video' has been removed. Use ':inverse-video' instead. +++ ** Support interactive D-Bus authorization. A new ':authorizable t' parameter has been added to 'dbus-call-method' and 'dbus-call-method-asynchronously' to allow the user to interactively authorize the invoked D-Bus method (for example via polkit). ** The customization group 'wp' has been removed. It has been obsolete since Emacs 26.1. Use the group 'text' instead. ** Tree-sitter changes +++ *** Indirect buffers can have their own parser list. Before, indirect buffers share their base buffer’s parser list and parsers. Now they can have their own parser list. +++ *** New variable 'treesit-language-remap-alist'. This variable allows a user to remap one language into another, such that creating a parser for language A actually creates a parser for language B. By extension, any font-lock rules or indentation rules for language A will be applied to language B instead. This is useful for reusing font-lock rules and indentation rules of language A for language B, when language B is a strict superset of language A. +++ *** New accessor functions for each setting in 'treesit-font-lock-settings'. Now users can access a setting's query, feature, enable flag, and override flag by 'treesit-font-lock-setting-query', 'treesit-font-lock-setting-feature', 'treesit-font-lock-setting-enable', and 'treesit-font-lock-setting-override'. *** New treesit thing 'sexp-list'. Unlike the existing thing 'sexp' that defines both lists and atoms, 'sexp-list' defines only lists to be navigated by 'forward-sexp'. The new function 'treesit-forward-sexp-list' uses 'sexp-list' to move across lists. But to move across atoms inside the list it uses `forward-sexp-default-function'. +++ *** New function 'treesit-language-display-name'. New function that returns the display name given the language symbol. For example, 'cpp' is translated to "C++". Also adds a new variable 'treesit-language-display-name-alist' that the function uses to translate display names. +++ *** New command 'treesit-explore' This command replaces 'treesit-explore-mode'. It turns on 'treesit-explore-mode' if it’s not on, and pops up the explorer buffer if it’s already on. +++ *** 'treesit-explore-mode' now supports local parsers Now 'treesit-explore-mode' (or 'treesit-explore') prompts for a parser rather than a language, and it’s now possible to select a local parser at point to explore. +++ *** New variable 'treesit-aggregated-simple-imenu-settings' This variable allows major modes to setup Imenu for multiple languages. +++ ** New optional BUFFER argument for 'string-pixel-width'. If supplied, 'string-pixel-width' will use any face remappings from BUFFER when computing the string's width. --- ** New macro 'with-work-buffer'. This macro is similar to the already existing macro 'with-temp-buffer', except that it does not allocate a new temporary buffer on each call, but tries to reuse those previously allocated (up to a number defined by the new variable 'work-buffer-limit', which defaults to 10). +++ ** 'date-to-time' now defaults to local time. The function now assumes local time instead of Universal Time when its argument lacks explicit time zone information. This has been the de-facto behavior since Emacs 24 although documentation said otherwise. Also, the fallback on 'timezone-make-date-arpa-standard' has been removed because its supported date styles can be handled by 'parse-time-string'. To restore the previously documented behavior, specify "+0000" or "Z" as the time zone in the argument. --- ** The 'min-width' property is now supported for overlays as well. This 'display' property was previously supported only as text property. Now overlays can also have this property, with the same effect for the text "covered" by the overlay. +++ ** New macro 'cond*'. The new macro 'cond*' is an alternative to 'cond' and 'pcase'. Like them, it can be used to define several clauses, each one with its own condition; the first clause that matches will cause its body to be evaluated. 'cond*' can use Pcase's pattern matching syntax and also provides another pattern matching syntax that is different from that of 'pcase', which some users might find less cryptic. See the Info node "(elisp) cond* Macro" for details. --- ** New function 'shell-command-do-open'. This lets a Lisp program access the core functionality of the 'dired-do-open' command. It opens a file or files using an external program, choosing the program according to the operating system's conventions. +++ ** 'make-vtable' can create an empty vtable. It is now possible to create a vtable without data, by leaving the ':objects' list empty, or by providing an ':objects-function' that (initially) produces no data. In such a case, it is necessary to provide a ':columns' spec, so that the number of columns and their widths can be determined. Column widths can be set explicitly, or they will be calculated based on the window width. +++ ** New symbol property 'repeat-continue' for 'repeat-mode'. A command with this symbol property whose value is a list of repeat maps will not activate the repeat map in 'repeat-mode'. It will only continue the already activated repeating sequence. Also 'defvar-keymap' supports a new keyword ':continue' with a list of commands that only continue the active repeating sequence. ** New function 'completion-table-with-metadata'. It offers a more concise way to create a completion table with metadata. +++ ** 'all-completions' and 'unintern' no longer support old calling conventions. * Changes in Emacs 31.1 on Non-Free Operating Systems --- ** Process execution has been optimized on Android. The run-time performance of subprocesses on recent Android releases, where a userspace executable loader is required, has been optimized on systems featuring Linux 3.5.0 and above. --- ** 'NSSpeechRecognitionUsageDescription' now included in "Info.plist" (macOS). Should Emacs (or any built-in shell) invoke a process using macOS speech recognition APIs, the relevant permission dialog is now displayed, thus allowing Emacs users access to speech recognition utilities. Note: Accepting this permission allows the use of system APIs, which may send user data to Apple’s speech recognition servers. --- ** Emacs on MS-Windows now supports GUI dialogs and message boxes better. In particular, it is now possible to show text with embedded newlines in a dialog popped by 'message-box'. This is supported on Windows Vista and later versions. --- ** Emacs on MS-Windows now supports drag-n-drop of text into a buffer. This is in addition to drag-n-drop of files, that was already supported. As on X, the user options 'dnd-scroll-margin' and 'dnd-indicate-insertion-point' can be used to customize the process. --- ** Emacs on MS-Windows now supports color fonts. On Windows 8.1 and later versions Emacs now uses DirectWrite to draw text, which supports color fonts. This can be disabled by setting the variable 'w32-inhibit-dwrite' to t. Also see 'w32-dwrite-available' and 'w32-dwrite-reinit' to check availability and to configure the DirectWrite rendering parameters. To show color Emojis in Emacs, customize the default fontset to use a color Emoji font installed on your system for the 'emoji' script. +++ ** Emacs on MS-Windows now supports 'yank-media'. This command inserts clipboard data of different formats into the current buffer, if the major mode supports it. (Support for 'yank-media' will be unavailable on MS-Windows if Emacs was configured '--without-native-image-api'.) --- ** Images on MS-Windows now support the ':transform-smoothing' flag. Transformed images are smoothed using the bilinear interpolation by means of the GDI+ library. --- ** Emacs on MS-Windows now supports the ':data' keyword for 'play-sound'. In addition to ':file FILE' for playing a sound from a file, ':data DATA' can now be used to play a sound from memory. ---------------------------------------------------------------------- This file is part of GNU Emacs. GNU Emacs is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Emacs. If not, see . Local variables: coding: utf-8 mode: outline mode: emacs-news paragraph-separate: "[ ]" end: