From: "Roar Thronæs" <roart@nvg.ntnu.no>
Cc: emacs-devel@gnu.org
Subject: Re: Emacs on VMS
Date: Fri, 8 Feb 2002 15:41:29 +0100 (CET) [thread overview]
Message-ID: <Pine.LNX.4.40.0202081519471.1505-200000@hagbart.nvg.ntnu.no> (raw)
In-Reply-To: <200202081357.g18Dvia05460@aztec.santafe.edu>
[-- Attachment #1: Type: TEXT/PLAIN, Size: 736 bytes --]
On Fri, 8 Feb 2002, Richard Stallman wrote:
> What I have got so far is available at:
> ftp.nvg.ntnu.no /pub/vms/emacs/emacs21_1.tgz
> It is diffable against an ordinary 21.1.
>
> It is not feasible for me to access that. Can you email us
> the diffs for the single .c file that has the biggest diffs?
> That will give a picture of how hard this is.
That might be sysdep.c, even though it is a bit bigger than it should be
due to testing alternative functions.
The -u diff is 17 k large.
The -ru diff against an ordinary 21.1 is 118 k large, by the way.
It is mostly stuff that has been there before, but there are some some new
patches, #ifdefs and two new functions.
--
Regards,
-Roar Thronæs
[-- Attachment #2: Type: TEXT/PLAIN, Size: 18607 bytes --]
--- /Stores/stash/emacs/src-21.1/src/sysdep.c Mon Oct 8 11:02:08 2001
+++ ./src/sysdep.c Sat Feb 2 14:35:50 2002
@@ -60,6 +60,21 @@
#define min(x,y) ((x) > (y) ? (y) : (x))
+#ifdef VMS
+/* In this file, open, read and write refer to the system calls,
+ not our sugared interfaces sys_open, sys_read and sys_write.
+ Contrariwise, for systems where we use the system calls directly,
+ define sys_read, etc. here as aliases for them. */
+#ifndef read
+#define sys_read read
+#define sys_write write
+#endif /* `read' is not a macro */
+
+#undef read
+#undef write
+
+#endif
+
#ifdef WINDOWSNT
#define read sys_read
#define write sys_write
@@ -69,9 +84,23 @@
#endif
#endif /* not WINDOWSNT */
+#ifdef VMS
+#ifndef close
+#define sys_close close
+#else
+#undef close
+#endif
+
+#ifndef open
+#define sys_open open
+#else /* `open' is a macro */
+#undef open
+#endif /* `open' is a macro */
+#endif
+
/* Does anyone other than VMS need this? */
#ifndef fwrite
-#define sys_fwrite fwrite
+#define sys_write write
#else
#undef fwrite
#endif
@@ -131,6 +160,7 @@
#include <atrdef.h>
#include <ctype.h>
#include <string.h>
+#include <perror.h>
#ifdef __GNUC__
#include <sys/file.h>
#else
@@ -141,6 +171,15 @@
#include <rab.h>
#endif
#define MAXIOSIZE (32 * PAGESIZE) /* Don't I/O more than 32 blocks at a time */
+int waiting_for_ast = 1;
+unsigned int input_ef = 0;
+unsigned int input_eflist = 0;
+unsigned int timer_ef = 0;
+unsigned int timer_eflist = 0;
+unsigned int process_ef = 0;
+unsigned int stop_input = 0;
+unsigned int ast_queued = 0;
+const unsigned __int64 reqidt = 0xdeadbeefdeadbeef;
#endif /* VMS */
#ifndef BSD4_1
@@ -1026,7 +1065,11 @@
if (read_socket_hook)
return;
+#ifndef VMS
croak ("request_sigio");
+#else
+ sys$setast(1);
+#endif
}
void
@@ -1035,7 +1078,11 @@
if (read_socket_hook)
return;
+#ifndef VMS
croak ("unrequest_sigio");
+#else
+ sys$setast(0);
+#endif
}
#endif /* _CX_UX */
@@ -1319,7 +1366,9 @@
input_ef = get_kbd_event_flag ();
/* LIB$GET_EF (&input_ef); */
SYS$CLREF (input_ef);
+#if 0
waiting_for_ast = 0;
+#endif
if (!timer_ef)
timer_ef = get_timer_event_flag ();
/* LIB$GET_EF (&timer_ef); */
@@ -1948,13 +1997,16 @@
queue_kbd_input ()
{
int status;
- extern kbd_input_ast ();
+ extern void kbd_input_ast ();
+#if 0
waiting_for_ast = 0;
+#endif
stop_input = 0;
status = SYS$QIO (0, input_fd, IO$_READVBLK,
&input_iosb, kbd_input_ast, 1,
&input_buffer, 1, 0, terminator_mask, 0, 0);
+ ast_queued = 1;
}
int input_count;
@@ -1962,16 +2014,315 @@
/* Ast routine that is called when keyboard input comes in
in accord with the SYS$QIO above. */
-void
kbd_input_ast ()
{
+ int old_errno = errno;
+
+ ast_queued = 0;
+
+ if (! stop_input)
+ {
+ extern EMACS_TIME *input_available_clear_time;
+ static struct input_event buf[4096];
+ register int passes = -1;
+
+ if (input_available_clear_time)
+ EMACS_SET_SECS_USECS (*input_available_clear_time, 0, 0);
+
+#ifdef ASTDEBUG
+ fprintf (stderr, "ASTDEBUG: AST occured!\n");
+#endif
+
+ while (1)
+ {
+ register int c = -1;
+ register int nread = 0;
+ int i;
+
+ passes++;
+
+ if (read_socket_hook)
+ nread = (*read_socket_hook) (0, buf, 4096, 0, 0);
+ else
+ {
+#if 0
+ if (interrupt_input_blocked)
+ {
+ interrupt_input_pending = 1;
+ return -1;
+ }
+
+ interrupt_input_pending = 0;
+#endif
+ if (passes == 0)
+ {
+#ifdef ASTDEBUG
+ input_count++;
+ if (input_count == 25)
+ exit (1);
+ printf ("Ast # %d,", input_count);
+ printf (" iosb = %x, %x, %x, %x",
+ input_iosb.offset, input_iosb.status,
+ input_iosb.termlen, input_iosb.term);
+#endif
+ if (input_iosb.offset)
+ {
+ c = input_buffer;
+#ifdef ASTDEBUG
+ printf (", char = 0%o", c);
+#endif
+ }
+#ifdef ASTDEBUG
+ printf ("\n");
+ fflush (stdout);
+ sleep (1);
+#endif
+ queue_kbd_input ();
+ }
+ if (c >= 0)
+ {
+ extern int meta_key; /* in keyboard.c */
+
+ nread = 1;
+ buf->kind = ascii_keystroke;
+ buf->modifiers = 0;
+ if (meta_key == 1 && (c & 0x80))
+ buf->modifiers = meta_modifier;
+ if (meta_key != 2)
+ c &= ~0x80;
+
+ XSET (buf->code, Lisp_Int, c);
+#ifdef MULTI_FRAME
+ XSETFRAME (buf->frame_or_window, selected_frame);
+#else
+ buf->frame_or_window = Qnil;
+#endif
+ }
+ }
+
+ /* Scan the chars for C-g and store them in kbd_buffer. */
+ for (i = 0; i < nread; i++)
+ {
+#ifdef ASTDEBUG
+ {
+ extern Lisp_Object Qexternal_debugging_output;
+
+ switch (buf[i].kind)
+ {
+ case no_event:
+ fprintf (stderr, "ASTDEBUG: buf[%d] = no event\n", i);
+ break;
+ case ascii_keystroke:
+ fprintf (stderr,
+ "ASTDEBUG: buf[%d] = ASCII keystroke with\n", i);
+ fprintf (stderr, " .code = ");
+ Fprin1 (buf[i].code, Qexternal_debugging_output);
+ fprintf (stderr, "\n");
+ fprintf (stderr, " .frame_or_window = ");
+ Fprin1 (buf[i].frame_or_window,
+ Qexternal_debugging_output);
+ fprintf (stderr, "\n");
+ fprintf (stderr,
+ " .timestamp = %d\n",
+ buf[i].timestamp);
+ break;
+ case non_ascii_keystroke:
+ fprintf (stderr,
+ "ASTDEBUG: buf[%d] = keystroke with\n", i);
+ fprintf (stderr, " .code = ");
+ Fprin1 (buf[i].code, Qexternal_debugging_output);
+ fprintf (stderr, "\n");
+ fprintf (stderr,
+ " .modifiers = %d\n",
+ buf[i].modifiers);
+ fprintf (stderr, " .frame_or_window = ");
+ Fprin1 (buf[i].frame_or_window,
+ Qexternal_debugging_output);
+ fprintf (stderr, "\n");
+ fprintf (stderr,
+ " .timestamp = %d\n",
+ buf[i].timestamp);
+ break;
+ case mouse_click:
+ fprintf (stderr,
+ "ASTDEBUG: buf[%d] = mouse click with\n", i);
+ fprintf (stderr, " .code = ");
+ Fprin1 (buf[i].code, Qexternal_debugging_output);
+ fprintf (stderr, "\n");
+ fprintf (stderr,
+ " .modifiers = %d\n",
+ buf[i].modifiers);
+ fprintf (stderr, " .frame_or_window = ");
+ Fprin1 (buf[i].frame_or_window,
+ Qexternal_debugging_output);
+ fprintf (stderr, "\n");
+ fprintf (stderr, " .x = ");
+ Fprin1 (buf[i].x, Qexternal_debugging_output);
+ fprintf (stderr, "\n");
+ fprintf (stderr, " .y = ");
+ Fprin1 (buf[i].y, Qexternal_debugging_output);
+ fprintf (stderr, "\n");
+ fprintf (stderr,
+ " .timestamp = %d\n",
+ buf[i].timestamp);
+ break;
+ case scroll_bar_click:
+ fprintf (stderr,
+ "ASTDEBUG: buf[%d] = mouse click with\n", i);
+ fprintf (stderr, " .code = ");
+ Fprin1 (buf[i].code, Qexternal_debugging_output);
+ fprintf (stderr, "\n");
+ fprintf (stderr,
+ " .modifiers = %d\n",
+ buf[i].modifiers);
+ fprintf (stderr, " .part = ");
+ switch (buf[i].part)
+ {
+ case scroll_bar_above_handle:
+ fprintf (stderr, "scroll_bar_above_handle\n");
+ break;
+ case scroll_bar_handle:
+ fprintf (stderr, "scroll_bar_handle\n");
+ break;
+ case scroll_bar_below_handle:
+ fprintf (stderr, "scroll_bar_below_handle\n");
+ break;
+ }
+ fprintf (stderr, " .frame_or_window = ");
+ Fprin1 (buf[i].frame_or_window,
+ Qexternal_debugging_output);
+ fprintf (stderr, "\n");
+ fprintf (stderr, " .x = ");
+ Fprin1 (buf[i].x, Qexternal_debugging_output);
+ fprintf (stderr, "\n");
+ fprintf (stderr, " .y = ");
+ Fprin1 (buf[i].y, Qexternal_debugging_output);
+ fprintf (stderr, "\n");
+ fprintf (stderr,
+ " .timestamp = %d\n",
+ buf[i].timestamp);
+ break;
+ case selection_request_event:
+ fprintf (stderr,
+ "ASTDEBUG: buf[%d] = selection request event with\n", i);
+ fprintf (stderr,
+ " .requestor = %u\n",
+ SELECTION_EVENT_REQUESTOR (&buf[i]));
+ fprintf (stderr,
+ " .selection = %u\n",
+ SELECTION_EVENT_SELECTION (&buf[i]));
+ fprintf (stderr,
+ " .target = %u\n",
+ SELECTION_EVENT_TARGET (&buf[i]));
+ fprintf (stderr,
+ " .property = %u\n",
+ SELECTION_EVENT_PROPERTY (&buf[i]));
+ fprintf (stderr,
+ " .time = %u\n",
+ SELECTION_EVENT_TIME (&buf[i]));
+ break;
+ case selection_clear_event:
+ fprintf (stderr,
+ "ASTDEBUG: buf[%d] = selection clear event with\n", i);
+ fprintf (stderr,
+ " .requestor = %u\n",
+ SELECTION_EVENT_REQUESTOR (&buf[i]));
+ fprintf (stderr,
+ " .selection = %u\n",
+ SELECTION_EVENT_SELECTION (&buf[i]));
+ fprintf (stderr,
+ " .target = %u\n",
+ SELECTION_EVENT_TARGET (&buf[i]));
+ fprintf (stderr,
+ " .property = %u\n",
+ SELECTION_EVENT_PROPERTY (&buf[i]));
+ fprintf (stderr,
+ " .time = %u\n",
+ SELECTION_EVENT_TIME (&buf[i]));
+ break;
+ case delete_window_event:
+ fprintf (stderr,
+ "ASTDEBUG: buf[%d] = delete window event with\n",
+ i);
+ fprintf (stderr, " .frame_or_window = ");
+ Fprin1 (buf[i].frame_or_window,
+ Qexternal_debugging_output);
+ break;
+ default:
+ fprintf (stderr,
+ "ASTDEBUG: buf[%d] = some odd event with\n", i);
+ }
+ }
+#endif
+ kbd_buffer_store_event (&buf[i]);
+ /* Don't look at input that follows a C-g too closely.
+ This reduces lossage due to autorepeat on C-g. */
+ if (buf[i].kind == ascii_keystroke
+ && XINT(buf[i].code) == quit_char)
+ break;
+ }
+
+ if (nread <= 0)
+ break;
+ }
+ }
+ {
+#ifdef ASTDEBUG
+ fprintf (stderr, "ASTDEBUG: setting the event flag %d\n", input_ef);
+#endif
+ sys$setef (input_ef);
+ }
+
+ errno = old_errno;
+}
+
+end_kbd_input ()
+{
+#ifdef ASTDEBUG
+ printf ("At end_kbd_input.\n");
+ fflush (stdout);
+ sleep (1);
+#endif
+ if (lib$ast_in_prog ()) /* Don't wait if suspending from kbd_buffer_store_event! */
+ {
+ sys$cancel (input_fd);
+ return;
+ }
+
+ if (ast_queued)
+ {
+ sys$setast (0);
+ /* Clear a flag, and tell ast routine above to set it. */
+ sys$clref (input_ef);
+#if 0
+ waiting_for_ast = 1;
+#endif
+ stop_input = 1;
+ sys$cancel (input_fd);
+ sys$setast (1);
+#if 1
+ sys$waitfr (input_ef);
+#endif
+ sys$clref (input_ef);
+#if 0
+ waiting_for_ast = 0;
+#endif
+ stop_input = 0;
+ }
+}
+
+void
+kbd_input_ast2 ()
+{
register int c = -1;
int old_errno = errno;
extern EMACS_TIME *input_available_clear_time;
if (waiting_for_ast)
SYS$SETEF (input_ef);
+#if 0
waiting_for_ast = 0;
+#endif
input_count++;
#ifdef ASTDEBUG
if (input_count == 25)
@@ -1998,6 +2349,10 @@
if (c >= 0)
{
struct input_event e;
+#ifdef VMS
+ /* contents are not zero! -Roar */
+ bzero(&e,sizeof(e));
+#endif
e.kind = ascii_keystroke;
XSETINT (e.code, c);
e.frame_or_window = selected_frame;
@@ -2008,8 +2363,8 @@
errno = old_errno;
}
-/* Wait until there is something in kbd_buffer. */
+#if 0
void
wait_for_kbd_input ()
{
@@ -2050,6 +2405,7 @@
}
waiting_for_ast = 0;
}
+#endif
/* Get rid of any pending QIO, when we are about to suspend
or when we want to throw away pending input.
@@ -2058,7 +2414,7 @@
SYS$SETAST is used to avoid a timing error. */
void
-end_kbd_input ()
+end_kbd_input2 ()
{
#ifdef ASTDEBUG
printf ("At end_kbd_input.\n");
@@ -2074,16 +2430,21 @@
SYS$SETAST (0);
/* Clear a flag, and tell ast routine above to set it. */
SYS$CLREF (input_ef);
+#if 0
waiting_for_ast = 1;
+#endif
stop_input = 1;
SYS$CANCEL (input_fd);
SYS$SETAST (1);
SYS$WAITFR (input_ef);
+#if 0
waiting_for_ast = 0;
+#endif
}
/* Wait for either input available or time interval expiry. */
+#if 0
void
input_wait_timeout (timeval)
int timeval; /* Time to wait, in seconds */
@@ -2106,12 +2467,13 @@
if (!detect_input_pending ())
{
/* No timing error: wait for flag to be set. */
- SYS$CANTIM (1, 0);
- if (SYS$SETIMR (timer_ef, time, 0, 1) & 1) /* Set timer */
+ SYS$CANTIM (reqidt, 0);
+ if (SYS$SETIMR (timer_ef, time, 0, reqidt) & 1) /* Set timer */
SYS$WFLOR (timer_ef, timer_eflist); /* Wait for timer expiry or input */
}
waiting_for_ast = 0;
}
+#endif
/* The standard `sleep' routine works some other way
and it stops working if you have ever quit out of it.
@@ -2126,33 +2488,35 @@
LIB$EMUL (&timeval, &large, &zero, time); /* Convert to VMS format */
- SYS$CANTIM (1, 0);
- if (SYS$SETIMR (timer_ef, time, 0, 1) & 1) /* Set timer */
+ SYS$CANTIM (reqidt, 0);
+ if (SYS$SETIMR (timer_ef, time, 0, reqidt) & 1) /* Set timer */
SYS$WAITFR (timer_ef); /* Wait for timer expiry only */
}
void
-init_sigio (fd)
- int fd;
+init_sigio2 (fd)
+ int fd;
{
request_sigio ();
}
-reset_sigio ()
+reset_sigio2 ()
{
unrequest_sigio ();
}
void
-request_sigio ()
+request_sigio2 ()
{
- croak ("request sigio");
+ sys$setast(1);
+/* croak ("request sigio");*/
}
void
-unrequest_sigio ()
+unrequest_sigio2 ()
{
- croak ("unrequest sigio");
+ sys$setast(0);
+/* croak ("unrequest sigio");*/
}
#endif /* VMS */
@@ -2262,7 +2626,11 @@
#ifdef TEXT_END
return ((char *) TEXT_END);
#else
+#ifdef VMS
+ int etext;
+#else
extern int etext;
+#endif
return ((char *) &etext);
#endif
}
@@ -3254,9 +3622,18 @@
if (oflag & O_CREAT)
return creat (path, mode);
#endif
-
+#ifdef VMS
+turn_on_atimers(0);
+#endif
+if (0) {
+char buf[90];
+printf("dirs %s %s\n",getcwd(buf,90),path);
+ }
while ((rtnval = open (path, oflag, mode)) == -1
&& (errno == EINTR));
+#ifdef VMS
+turn_on_atimers(1);
+#endif
return (rtnval);
}
@@ -3709,7 +4086,11 @@
MKDIR_PROTOTYPE
#else
int
+#ifdef VMS
+mkdir2 (dpath, dmode)
+#else
mkdir (dpath, dmode)
+#endif
char *dpath;
int dmode;
#endif
@@ -4210,9 +4591,13 @@
#undef read
int
-sys_read (fildes, buf, nbyte)
+sys_read (fildes, buf, nbyte)
int fildes;
+#ifdef VMS
+ void *buf;
+#else
char *buf;
+#endif
unsigned int nbyte;
{
return read (fildes, buf, (nbyte < MAXIOSIZE ? nbyte : MAXIOSIZE));
@@ -4250,9 +4635,13 @@
#undef write
int
-sys_write (fildes, buf, nbytes)
+sys_write (fildes, buf, nbytes)
int fildes;
+#ifndef VMS
char *buf;
+#else
+ void *buf;
+#endif
unsigned int nbytes;
{
register char *p;
@@ -4384,7 +4773,7 @@
#endif
int
-sys_creat (va_alist)
+sys_creat (va_alist)
va_dcl
{
va_list list_incrementer;
@@ -4813,7 +5202,7 @@
vaxc$errno = status;
return -1;
}
- free_pages *= 512;
+ free_pages *= 8192; /* was 512; */
item_code = JPI$_FREP0VA;
if (((status = LIB$GETJPI (&item_code, 0, 0, &frep0va)) & 1) == 0)
@@ -4873,13 +5262,19 @@
}
int
-execvp ()
+execvp2 ()
{
error ("execvp system call not implemented");
return -1;
}
int
+sys_execvp(const char *__file, __char_ptr_const_ptr32 __argv)
+{
+decc$execvp(__file,__argv);
+}
+
+int
rename (from, to)
char *from, *to;
{
@@ -4979,9 +5374,14 @@
SYS$OPEN (&to_fab, 0, 0); /* This fills in the nam$w_fid fields */
/* Copy these fields into the fib */
+/*
fib.fib$r_fid_overlay.fib$w_fid[0] = to_nam.nam$w_fid[0];
fib.fib$r_fid_overlay.fib$w_fid[1] = to_nam.nam$w_fid[1];
fib.fib$r_fid_overlay.fib$w_fid[2] = to_nam.nam$w_fid[2];
+*/
+ fib.fib$w_fid[0] = to_nam.nam$w_fid[0];
+ fib.fib$w_fid[1] = to_nam.nam$w_fid[1];
+ fib.fib$w_fid[2] = to_nam.nam$w_fid[2];
SYS$CLOSE (&to_fab, 0, 0);
@@ -5077,7 +5477,7 @@
}
long
-random ()
+random2 ()
{
/* Arrange to return a range centered on zero. */
return rand () - (1 << 30);
@@ -5272,7 +5672,11 @@
#ifndef BSTRING
#ifndef bcmp
int
-bcmp (b1, b2, length) /* This could be a macro! */
+#ifdef VMS
+bcmp2 (b1, b2, length) /* This could be a macro! */
+#else
+bcmp (b1, b2, length) /* This could be a macro! */
+#endif
register char *b1;
register char *b2;
register int length;
@@ -5295,22 +5699,39 @@
\f
#ifndef HAVE_STRSIGNAL
char *
-strsignal (code)
- int code;
+strsignal (signo)
+ int signo;
{
char *signame = 0;
- if (0 <= code && code < NSIG)
+ if (0 <= signo && signo < NSIG)
{
#ifdef VMS
- signame = sys_errlist[code];
+ signame = sys_errlist[signo];
#else
/* Cast to suppress warning if the table has const char *. */
- signame = (char *) sys_siglist[code];
+ signame = (char *) sys_siglist[signo];
#endif
}
return signame;
}
#endif /* HAVE_STRSIGNAL */
+
+#ifdef VMS
+fork ()
+{
+ return vfork();
+}
+
+int
+sys_select2 (nfds, rfds, wfds, efds, timeout)
+ int nfds;
+ int *rfds, *wfds, *efds;
+ int *timeout;
+{
+return select(nfds, rfds, wfds, efds, timeout);
+}
+
+#endif
next prev parent reply other threads:[~2002-02-08 14:41 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200201130735.g0D7ZRb07825@aztec.santafe.edu>
2002-02-07 11:29 ` Emacs on VMS Roar Thronæs
2002-02-08 13:57 ` Richard Stallman
2002-02-08 14:41 ` Roar Thronæs [this message]
2002-02-09 11:03 ` Roar Thronæs
2002-02-11 2:08 ` Richard Stallman
2002-03-16 8:36 ` roart
2002-04-05 15:12 ` roart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://www.gnu.org/software/emacs/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.40.0202081519471.1505-200000@hagbart.nvg.ntnu.no \
--to=roart@nvg.ntnu.no \
--cc=emacs-devel@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).