Re: Tabs in Emacs?

Re: Tabs in Emacs?

[A. Soare]

> Good news that you have implemented GTK and console part of the tabs
> implementation as I have implemented only the non-toolkit part.
> 
> Any chance to merge with your code soon?
> 

I will reopen the archives in the first half of the next year. Until then, I do not have time.




Alin.





____________________________________________________

Gagnez un séjour au Maroc en découvrant les sketchs désopilants des ReVoila sur http://www.lesrevoila.fr/

Re: Tabs in Emacs?

[Stefan Monnier]

>> Good news that you have implemented GTK and console part of the tabs
>> implementation as I have implemented only the non-toolkit part.
>> Any chance to merge with your code soon?
> I will reopen the archives in the first half of the next year. Until
> then, I do not have time.

Why don't you send you patch here so others can look at it and maybe
work on it if they have the time (and inclination)?


        Stefan

Re: Tabs in Emacs?

[A. Soare]

> 
> Why don't you send you patch here so others can look at it and maybe
> work on it if they have the time (and inclination)?

I have changed the definition of a frame, and I was into the point to replace everywhere FOR_EACH_FRAME with the new correct form.

I do not want to send the code before I replace it everywhere where it must be replaced, and this will be some work.



Alin.




____________________________________________________

Gagnez un séjour au Maroc en découvrant les sketchs désopilants des ReVoila sur http://www.lesrevoila.fr/

Re: Tabs in Emacs?

[A. Soare]

I resend the message, because I reveived error of the first transmission.


> I would ask if there are plans to add tabs, as many modern applications 
> have, for Emacs 23.2.
> 
> Cheers,
> Angelo.
> 

I did solve the problem. I did write the C code for the tabs of Emacs 1 year ago, but, unfortunately, I had to postpone to send it to emacs.

The code is almost finished, and I believe that in Avril/May I will have time to finish and send it.

I have to add code for Athena/Motif, and that is all.

I attach here a picture of the tabs in GTK and a picture with the tabs in console.

Tabs for Emacs - gtk+ version: http://imagebin.ca/view/hCu302.html

and

Tabs for Emacs - console version: http://imagebin.ca/view/nTtJdHou.html




Alin .







____________________________________________________

Gagnez un séjour au Maroc en découvrant les sketchs désopilants des ReVoila sur http://www.lesrevoila.fr/

Re: Tabs in Emacs?

[Juri Linkov]

>> I would ask if there are plans to add tabs, as many modern applications
>> have, for Emacs 23.2.
>
> I did solve the problem. I did write the C code for the tabs of Emacs
> 1 year ago, but, unfortunately, I had to postpone to send it to emacs.
>
> The code is almost finished, and I believe that in Avril/May I will
> have time to finish and send it.
>
> I have to add code for Athena/Motif, and that is all.
>
> I attach here a picture of the tabs in GTK and a picture with the tabs
> in console.

Good news that you have implemented GTK and console part of the tabs
implementation as I have implemented only the non-toolkit part.

Any chance to merge with your code soon?

-- 
Juri Linkov
http://www.jurta.org/emacs/

Tabs in Emacs?

[Angelo Graziosi]

I would ask if there are plans to add tabs, as many modern applications 
have, for Emacs 23.2.

Cheers,
Angelo.

Re: Tabs in Emacs?

[Deniz Dogan]

2009/11/17 Angelo Graziosi <angelo.graziosi@alice.it>:
> I would ask if there are plans to add tabs, as many modern applications
> have, for Emacs 23.2.
>
> Cheers,
> Angelo.
>

There is already e.g. tab bar mode, but it's not part of "core" Emacs today:
http://www.emacswiki.org/emacs/TabBarMode

-- 
Deniz Dogan

AW: Tabs in Emacs?

[Berndl, Klaus]

IMHO this tabbar-mode has nothing to do with "real" tabs (as e.g. in Firefox) because the header-line is (mis-)used as tab-title/handle, so when using this mechanism to *simulate* tabs i have no headerline within the tabs... IMHO nothing what i would call "Tabs"...

Klaus

________________________________________
Von: emacs-devel-bounces+klaus.berndl=sdm.de@gnu.org [emacs-devel-bounces+klaus.berndl=sdm.de@gnu.org] im Auftrag von Deniz Dogan [deniz.a.m.dogan@gmail.com]
Gesendet: Dienstag, 17. November 2009 14:32
An: Angelo Graziosi
Cc: Emacs
Betreff: Re: Tabs in Emacs?

2009/11/17 Angelo Graziosi <angelo.graziosi@alice.it>:
> I would ask if there are plans to add tabs, as many modern applications
> have, for Emacs 23.2.
>
> Cheers,
> Angelo.
>

There is already e.g. tab bar mode, but it's not part of "core" Emacs today:
http://www.emacswiki.org/emacs/TabBarMode

--
Deniz Dogan

Re: AW: Tabs in Emacs?

[Miles Bader]

"Berndl, Klaus" <klaus.berndl@capgemini-sdm.com> writes:
> IMHO this tabbar-mode has nothing to do with "real" tabs (as e.g. in Firefox) because the header-line is (mis-)used as tab-title/handle, so when using this mechanism to *simulate* tabs i have no headerline within the tabs... IMHO nothing what i would call "Tabs"...

Note that exactly tabs _should_ work in Emacs is actually quite
contentious (that's one of the reasons they haven't been implemented) --
Emacs has a significantly more complex model than most apps, and it's
not really clear the best way to map the usual sort of tab-bar onto that
model (read one of the long tortuous emacs-devel threads on this subject
for details I guess)...

-Miles

-- 
((lambda (x) (list x x)) (lambda (x) (list x x)))

AW: AW: Tabs in Emacs?

[Berndl, Klaus]

Well, cause of Emacs' complex model with buffers, windows displaying buffers and frames displaying windows and on top window-configurations there is no easy answer, i have to admit.

But nevertheless i will make try:

IMHO tabs should an a frame-basis and each tab should display window-configurations, i.e. switching to a tab X should display exactly the window-layout and contents as X has contained when the user has left it
And each window of the window-configuration of a tab should contain it's headerline...

Is this understandable?

Klaus

-----Ursprüngliche Nachricht-----
Von: Miles Bader [mailto:miles@gnu.org] 
Gesendet: Dienstag, 17. November 2009 15:47
An: Berndl, Klaus
Cc: Deniz Dogan; Angelo Graziosi; Emacs
Betreff: Re: AW: Tabs in Emacs?

"Berndl, Klaus" <klaus.berndl@capgemini-sdm.com> writes:
> IMHO this tabbar-mode has nothing to do with "real" tabs (as e.g. in Firefox) because the header-line is (mis-)used as tab-title/handle, so when using this mechanism to *simulate* tabs i have no headerline within the tabs... IMHO nothing what i would call "Tabs"...

Note that exactly tabs _should_ work in Emacs is actually quite
contentious (that's one of the reasons they haven't been implemented) --
Emacs has a significantly more complex model than most apps, and it's
not really clear the best way to map the usual sort of tab-bar onto that
model (read one of the long tortuous emacs-devel threads on this subject
for details I guess)...

-Miles

-- 
((lambda (x) (list x x)) (lambda (x) (list x x)))

Re: AW: AW: Tabs in Emacs?

[Miles Bader]

"Berndl, Klaus" <klaus.berndl@capgemini-sdm.com> writes:
> IMHO tabs should an a frame-basis and each tab should display window-configurations, i.e. switching to a tab X should display exactly the window-layout and contents as X has contained when the user has left it
> And each window of the window-configuration of a tab should contain it's headerline...
>
> Is this understandable?

Sure, but... it may not exactly be what's most convenient for users --
again, it's a hard issue.

While a window-configuration switching implementation is useful in some
cases (e.g. eclipses uses a sort of similar system for switching between
"debugging view" "browsing view" etc), how would the different
configurations get set up ?  I can imagine a system that required
explicit user action ("add a new tab with current config"), but... 

I think many users might just want to switch between buffers, and have
tabs automatically added for each buffer (perhaps limiting the number
displayed in a MRU fashion, e.g., how eclipse handles source file tabs).
That seems to be more similar to how tabs work in e.g. visual studio,
and other editors...

argh... :]

-miles

-- 
Suburbia: where they tear out the trees and then name streets after them.

AW: AW: AW: Tabs in Emacs?

[Berndl, Klaus]

Well - "argh" is well spoken ;-) 

Another suggestion, or precisely a refined suggestion:

1. Introducing new commands which represents your scenario where opening a new buffer opens a new tab (e.g. find-file-other-tab, switch-to-buffer-other-tab, adapting display-buffer in an appropriate manner etc...) Optionally we could also introduce some new defcustoms which can define a default-behavior: e.g. using the standard window-related commands (e.g. find-file-other-window) automatically opens/uses other tabs ...

2. But in general tabs represent window-configs and leaving a tab X stores ist window-config in a suitable way so it can be restored when entering again tab X - all this has to be happen automatically! Often the window-config will only contain one window...

So when a user wants the tab=buffer relation, he has it - he just has to use Emacs in way so opening buffers and switching to buffers operates on tabs (see 1) - but the whole stuff is much more powerful for scenarios where a tab contains a full window-config. The latter one is similar to something like escreen.el and winring.el and could be usefol for running in one tab ECB, in another Gnus, in another GUD - like eclipse...

Thoughts?

-----Ursprüngliche Nachricht-----
Von: miles@gnu.org [mailto:miles@gnu.org] 
Gesendet: Mittwoch, 18. November 2009 10:53
An: Berndl, Klaus
Cc: Angelo Graziosi; Emacs; Deniz Dogan
Betreff: Re: AW: AW: Tabs in Emacs?

"Berndl, Klaus" <klaus.berndl@capgemini-sdm.com> writes:
> IMHO tabs should an a frame-basis and each tab should display window-configurations, i.e. switching to a tab X should display exactly the window-layout and contents as X has contained when the user has left it
> And each window of the window-configuration of a tab should contain it's headerline...
>
> Is this understandable?

Sure, but... it may not exactly be what's most convenient for users --
again, it's a hard issue.

While a window-configuration switching implementation is useful in some
cases (e.g. eclipses uses a sort of similar system for switching between
"debugging view" "browsing view" etc), how would the different
configurations get set up ?  I can imagine a system that required
explicit user action ("add a new tab with current config"), but... 

I think many users might just want to switch between buffers, and have
tabs automatically added for each buffer (perhaps limiting the number
displayed in a MRU fashion, e.g., how eclipse handles source file tabs).
That seems to be more similar to how tabs work in e.g. visual studio,
and other editors...

argh... :]

-miles

-- 
Suburbia: where they tear out the trees and then name streets after them.

Re: Tabs in Emacs?

[Juri Linkov]

> Thoughts?

What you describe was implemented in the first prototype of
http://thread.gmane.org/gmane.emacs.devel/93208/focus=94508
that I have later used as the basis of implementing "real" tabs.

In the current implementation, the frame-based tab-bar is located
below the tool-bar.  The C part mostly duplicates code from the
non-tookit implementation of the tool-bar.  So there already exists
a non-tookit version of the tab-bar that works without crashes.

As for the GTK implementation, I still have unresolved problems.
I'd like to share the current code, so all Emacs developers would
be able to contribute to the development of the GTK part or to
improve code to place the tool-bar and the tab-bar anywhere
in the window tree, etc.

Sending a 4000-line patch to emacs-devel@gnu.org doesn't make sense.
Ideally, I'd like to create a new branch in a dVCS.  I regret we still
not switched to bzr where a new branch could be created cheaply.

Any suggestions on how to proceed with the implementation instead
of many years of talking about benefits of this highly useful feature?
(I can't now image how I used Emacs without tabs in a one-frame
configuration.)

-- 
Juri Linkov
http://www.jurta.org/emacs/

Re: AW: Tabs in Emacs?

[Jason Rumney]

Berndl, Klaus wrote:
> IMHO this tabbar-mode has nothing to do with "real" tabs (as e.g. in Firefox) because the header-line is (mis-)used as tab-title/handle, so when using this mechanism to *simulate* tabs i have no headerline within the tabs... IMHO nothing what i would call "Tabs"...
>   

How do you differentiate a "simulated" tab from a "real" tab?

AW: AW: Tabs in Emacs?

[Berndl, Klaus]

Simulating means, simulating tabs by using the headerline (AFAIK this is how tabbar-mode is implemented, isn't it?)...
Real would mean, there is a headerline available in the tab-window...

Please correct me if i write nonsense...

Klaus 

-----Ursprüngliche Nachricht-----
Von: Jason Rumney [mailto:jasonrumney@gmail.com] Im Auftrag von Jason Rumney
Gesendet: Dienstag, 17. November 2009 17:10
An: Berndl, Klaus
Cc: Emacs
Betreff: Re: AW: Tabs in Emacs?

Berndl, Klaus wrote:
> IMHO this tabbar-mode has nothing to do with "real" tabs (as e.g. in Firefox) because the header-line is (mis-)used as tab-title/handle, so when using this mechanism to *simulate* tabs i have no headerline within the tabs... IMHO nothing what i would call "Tabs"...
>   

How do you differentiate a "simulated" tab from a "real" tab?

Re: Tabs in Emacs?

[Teemu Likonen]

On 2009-11-18 09:49 (+0100), Klaus Berndl wrote:

> Simulating means, simulating tabs by using the headerline (AFAIK this
> is how tabbar-mode is implemented, isn't it?)... Real would mean,
> there is a headerline available in the tab-window...

I think that speaking of functional differences and usage patterns is
more useful in this discussion.

Anyway, previously I used Vim editor and found its tab feature handy and
very intuitive way for maintaining and switching between different
window configurations. With Emacs I use frames but I'd prefer having a
nice tab-like functionality within a single X Window frame. I don't care
if it is called "tabs", but just an intuitive way to switch between
different window configurations would be very useful.

> Please correct me if i write nonsense...

Ending sentences with just one period is enough. :-)

Re: Tabs in Emacs?

[Miles Bader]

Teemu Likonen <tlikonen@iki.fi> writes:
>> Please correct me if i write nonsense...
>
> Ending sentences with just one period is enough. :-)

Haven'''t you heard???  Three is the new one...

---Miles

-- 
Quack, n. A murderer without a license.

Re: Tabs in Emacs?

[Juri Linkov]

>>> I would ask if there are plans to add tabs, as many modern applications
>>> have, for Emacs 23.2.
>>
>> There is already e.g. tab bar mode, but it's not part of "core" Emacs today:
>> http://www.emacswiki.org/emacs/TabBarMode
>
> IMHO this tabbar-mode has nothing to do with "real" tabs (as e.g.
> in Firefox) because the header-line is (mis-)used as tab-title/handle,
> so when using this mechanism to *simulate* tabs i have no headerline
> within the tabs... IMHO nothing what i would call "Tabs"...

The last time I looked at the possibility to implement "real" tabs
in GTK, there was a problem of attaching GtkNotebook to a widget.
It's possible to bind a Gtk tab to a fake widget or to the same
basic frame.  This produces a warning, but should basically work
by binding GCallback from a tab to any function that we can use
to implement Emacs-specific tab handling.

-- 
Juri Linkov
http://www.jurta.org/emacs/

Re: Tabs in Emacs?

[Angelo Graziosi]

Deniz Dogan ha scritto:

> 
> There is already e.g. tab bar mode, but it's not part of "core" Emacs today:
> http://www.emacswiki.org/emacs/TabBarMode
> 

Not belonging to CVS, yet. Right?


Cheers,
Angelo.

Re: Tabs in Emacs?

[Xavier Maillard]

   2009/11/17 Angelo Graziosi <angelo.graziosi@alice.it>:
   > I would ask if there are plans to add tabs, as many modern applications
   > have, for Emacs 23.2.
   >
   > Cheers,
   > Angelo.
   >

   There is already e.g. tab bar mode, but it's not part of "core" Emacs today:
   http://www.emacswiki.org/emacs/TabBarMode

Why would someone need tabs in GNU Emacs exactly ? I am
curious. Buffers and related functions (browsing, navigating,
filtering ... ) are so powerful that I do not clearly understand
the need for such features.

	Xavier
-- 
http://www.gnu.org
http://www.april.org
http://www.lolica.org

Re: Tabs in Emacs?

[Miles Bader]

Xavier Maillard <xma@gnu.org> writes:
> Why would someone need tabs in GNU Emacs exactly ? I am
> curious. Buffers and related functions (browsing, navigating,
> filtering ... ) are so powerful that I do not clearly understand
> the need for such features.

If implemented well, tabs can be a nice visual reminder of recently used
buffers and UI for simple and quick mouse use.

They clearly aren't a _replacement_ for the more powerful underlying
functions, but I think they can be a useful addition (and make people
used to tabs in other programs feel warm&cozy).

-Miles

-- 
gravity a demanding master ... soft soft snow

Re: Tabs in Emacs?

[Xavier Maillard]

   Xavier Maillard <xma@gnu.org> writes:
   > Why would someone need tabs in GNU Emacs exactly ? I am
   > curious. Buffers and related functions (browsing, navigating,
   > filtering ... ) are so powerful that I do not clearly understand
   > the need for such features.

   If implemented well, tabs can be a nice visual reminder of recently used
   buffers and UI for simple and quick mouse use.

Hum yes. I am always in the linux console thus I do not need more
stuff. But I am pretty sure that even in X, I would not run the
graphic toolkit ;).

Sorry for the digression.

	Xavier
-- 
http://www.gnu.org
http://www.april.org
http://www.lolica.org

Re: Tabs in Emacs?

[Juri Linkov]

>    > Why would someone need tabs in GNU Emacs exactly ? I am
>    > curious. Buffers and related functions (browsing, navigating,
>    > filtering ... ) are so powerful that I do not clearly understand
>    > the need for such features.
>
>    If implemented well, tabs can be a nice visual reminder of recently
>    used buffers and UI for simple and quick mouse use.
>
> Hum yes. I am always in the linux console thus I do not need more
> stuff. But I am pretty sure that even in X, I would not run the
> graphic toolkit ;).

I happily use Emacs tabs in the console since internally tabs are just
a list of window configurations that can be displayed in any way.

-- 
Juri Linkov
http://www.jurta.org/emacs/

Re: Tabs in Emacs?

[Stefan Monnier]

> Why would someone need tabs in GNU Emacs exactly ? I am
> curious. Buffers and related functions (browsing, navigating,
> filtering ... ) are so powerful that I do not clearly understand
> the need for such features.

Actually, to manage window-configs, I think it might make sense.
I use frames for that (and if your WM supports tabs, you may end up
with the same functionality), but not everyone likes it that way.

This doesn't mean it's a high-priority feature, but if someone writes it
cleanly, I'll happily accept it.  IIUC Alin Soare <as1789@gmail.com> has
already started work on it.


        Stefan

Re: Tabs in Emacs?

[Andrey Paramonov]

Angelo Graziosi <angelo.graziosi <at> alice.it> writes:
> I would ask if there are plans to add tabs, as many modern applications 
> have, for Emacs 23.2.
> 

Dear Emacs developers, please do *not* spend your valuable time on features like
this. Tabs feature is already very well implemented in worthy window managers
(for example Fluxbox), and it works. Instead, please focus on things which are
broken, for example printing (http://thread.gmane.org/gmane.emacs.devel/109887).

Sorry for not being constructive.
 
Andrey Paramonov