* What version of harfbuzz is required?
@ 2020-11-11 15:51 Colin Baxter
2020-11-11 16:04 ` Robert Pluim
0 siblings, 1 reply; 7+ messages in thread
From: Colin Baxter @ 2020-11-11 15:51 UTC (permalink / raw)
To: emacs-devel
Hello,
When building emacs from master I get the warning:
WARNING: This configuration uses the Cairo graphics library,
but not the HarfBuzz font shaping library. We recommend the use
of HarfBuzz when using Cairo, please install HarfBuzz development
packages.
I have harfbuzz bin and dev libraries (0.9.35-2+deb8u1) installed, but
presumably they are too old. I am using i686 GNU/Linux 3.16.0-11-686-pae
#1 SMP Debian 3.16.84-1 (2020-06-09).
What minimal harfbuzz version do I need?
Thanks
Colin Baxter.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: What version of harfbuzz is required?
2020-11-11 15:51 What version of harfbuzz is required? Colin Baxter
@ 2020-11-11 16:04 ` Robert Pluim
2020-11-11 16:38 ` Colin Baxter
0 siblings, 1 reply; 7+ messages in thread
From: Robert Pluim @ 2020-11-11 16:04 UTC (permalink / raw)
To: Colin Baxter; +Cc: emacs-devel
Colin Baxter <m43cap@yandex.com> writes:
> Hello,
>
> When building emacs from master I get the warning:
>
> WARNING: This configuration uses the Cairo graphics library,
> but not the HarfBuzz font shaping library. We recommend the use
> of HarfBuzz when using Cairo, please install HarfBuzz development
> packages.
>
> I have harfbuzz bin and dev libraries (0.9.35-2+deb8u1) installed, but
> presumably they are too old. I am using i686 GNU/Linux 3.16.0-11-686-pae
> #1 SMP Debian 3.16.84-1 (2020-06-09).
>
> What minimal harfbuzz version do I need?
From configure.ac:
if test "${HAVE_W32}" = "yes"; then
EMACS_CHECK_MODULES([HARFBUZZ], [harfbuzz >= 1.2.3])
else
EMACS_CHECK_MODULES([HARFBUZZ], [harfbuzz >= 0.9.42])
fi
and the configure output says:
checking for harfbuzz >= 0.9.42... yes
I guess we could put the version in the warning as well, but it seems
a little excessive.
Robert
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: What version of harfbuzz is required?
2020-11-11 16:04 ` Robert Pluim
@ 2020-11-11 16:38 ` Colin Baxter
2020-11-12 11:06 ` Robert Pluim
0 siblings, 1 reply; 7+ messages in thread
From: Colin Baxter @ 2020-11-11 16:38 UTC (permalink / raw)
To: emacs-devel
Hello Robert,
>>>>> Robert Pluim <rpluim@gmail.com> writes:
> Colin Baxter <m43cap@yandex.com> writes:
>> Hello,
>>
>> When building emacs from master I get the warning:
>>
>> WARNING: This configuration uses the Cairo graphics library, but
>> not the HarfBuzz font shaping library. We recommend the use of
>> HarfBuzz when using Cairo, please install HarfBuzz development
>> packages.
>>
>> I have harfbuzz bin and dev libraries (0.9.35-2+deb8u1)
>> installed, but presumably they are too old. I am using i686
>> GNU/Linux 3.16.0-11-686-pae #1 SMP Debian 3.16.84-1 (2020-06-09).
>>
>> What minimal harfbuzz version do I need?
> From configure.ac:
> if test "${HAVE_W32}" = "yes"; then
> EMACS_CHECK_MODULES([HARFBUZZ], [harfbuzz >= 1.2.3]) else
> EMACS_CHECK_MODULES([HARFBUZZ], [harfbuzz >= 0.9.42]) fi
> and the configure output says: checking for harfbuzz >=
> 0.9.42... yes
Ok, 0.9.42. I suppose it's time to bite the bullet and upgrade my Debian.
> I guess we could put the version in the warning as well, but it
> seems a little excessive.
It could be useful in avoiding eye strain in searching the configure
output for a mention of 'harfbuzz' :-)
Thanks.
Colin.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: What version of harfbuzz is required?
2020-11-11 16:38 ` Colin Baxter
@ 2020-11-12 11:06 ` Robert Pluim
2020-11-12 12:00 ` Colin Baxter
2020-11-12 14:44 ` Eli Zaretskii
0 siblings, 2 replies; 7+ messages in thread
From: Robert Pluim @ 2020-11-12 11:06 UTC (permalink / raw)
To: Colin Baxter; +Cc: emacs-devel
Colin Baxter <m43cap@yandex.com> writes:
> > and the configure output says: checking for harfbuzz >=
> > 0.9.42... yes
>
> Ok, 0.9.42. I suppose it's time to bite the bullet and upgrade my
> Debian.
The non-HarfBuzz code is still functional, and won't go away for a
while yet.
>
> > I guess we could put the version in the warning as well, but it
> > seems a little excessive.
>
> It could be useful in avoiding eye strain in searching the configure
> output for a mention of 'harfbuzz' :-)
You donʼt run ./configure in a shell inside emacs? ;-)
Eli, something like this OK for master?
diff --git i/configure.ac w/configure.ac
index f0c8e5210f..888b415148 100644
--- i/configure.ac
+++ w/configure.ac
@@ -3444,16 +3444,17 @@ AC_DEFUN
fi # "${HAVE_X11}" != "yes"
HAVE_HARFBUZZ=no
+### On MS-Windows we use hb_font_get_nominal_glyph, which appeared
+### in HarfBuzz version 1.2.3
+if test "${HAVE_W32}" = "yes"; then
+ harfbuzz_required_ver=1.2.3
+else
+ harfbuzz_required_ver=0.9.42
+fi
if test "${HAVE_X11}" = "yes" && test "${HAVE_FREETYPE}" = "yes" \
|| test "${HAVE_W32}" = "yes"; then
if test "${with_harfbuzz}" != "no"; then
- ### On MS-Windows we use hb_font_get_nominal_glyph, which appeared
- ### in HarfBuzz version 1.2.3
- if test "${HAVE_W32}" = "yes"; then
- EMACS_CHECK_MODULES([HARFBUZZ], [harfbuzz >= 1.2.3])
- else
- EMACS_CHECK_MODULES([HARFBUZZ], [harfbuzz >= 0.9.42])
- fi
+ EMACS_CHECK_MODULES([HARFBUZZ], [harfbuzz >= $harfbuzz_required_ver])
if test "$HAVE_HARFBUZZ" = "yes"; then
AC_DEFINE(HAVE_HARFBUZZ, 1, [Define to 1 if using HarfBuzz.])
### mingw32 and Cygwin-w32 don't use -lharfbuzz, since they load
@@ -5918,9 +5919,9 @@ m4_define
if test "${HAVE_CAIRO}" = "yes" && test "${HAVE_HARFBUZZ}" = no; then
AC_MSG_WARN([This configuration uses the Cairo graphics library,
- but not the HarfBuzz font shaping library. We recommend the use
- of HarfBuzz when using Cairo, please install HarfBuzz development
- packages.])
+ but not the HarfBuzz font shaping library (minimum version $harfbuzz_required_ver).
+ We recommend the use of HarfBuzz when using Cairo, please install
+ appropriate HarfBuzz development packages.])
fi
# Let plain 'make' work.
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: What version of harfbuzz is required?
2020-11-12 11:06 ` Robert Pluim
@ 2020-11-12 12:00 ` Colin Baxter
2020-11-12 14:44 ` Eli Zaretskii
1 sibling, 0 replies; 7+ messages in thread
From: Colin Baxter @ 2020-11-12 12:00 UTC (permalink / raw)
To: emacs-devel
>>>>> Robert Pluim <rpluim@gmail.com> writes:
---- cut ----
> You donʼt run ./configure in a shell inside emacs? ;-)
Usually, but sometimes in vc-dir with M-x compile <RET> then subsequent
commands.
Best wishes,
Colin Baxter.
--
Colin Baxter
URL: http://www.Colin-Baxter.com
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: What version of harfbuzz is required?
2020-11-12 11:06 ` Robert Pluim
2020-11-12 12:00 ` Colin Baxter
@ 2020-11-12 14:44 ` Eli Zaretskii
2020-11-12 15:56 ` Robert Pluim
1 sibling, 1 reply; 7+ messages in thread
From: Eli Zaretskii @ 2020-11-12 14:44 UTC (permalink / raw)
To: Robert Pluim; +Cc: emacs-devel
> From: Robert Pluim <rpluim@gmail.com>
> Date: Thu, 12 Nov 2020 12:06:49 +0100
> Cc: emacs-devel@gnu.org
>
> Colin Baxter <m43cap@yandex.com> writes:
>
> > > I guess we could put the version in the warning as well, but it
> > > seems a little excessive.
> >
> > It could be useful in avoiding eye strain in searching the configure
> > output for a mention of 'harfbuzz' :-)
>
> You donʼt run ./configure in a shell inside emacs? ;-)
>
> Eli, something like this OK for master?
Yes, thanks.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: What version of harfbuzz is required?
2020-11-12 14:44 ` Eli Zaretskii
@ 2020-11-12 15:56 ` Robert Pluim
0 siblings, 0 replies; 7+ messages in thread
From: Robert Pluim @ 2020-11-12 15:56 UTC (permalink / raw)
To: Eli Zaretskii; +Cc: emacs-devel
Eli Zaretskii <eliz@gnu.org> writes:
>> From: Robert Pluim <rpluim@gmail.com>
>> Date: Thu, 12 Nov 2020 12:06:49 +0100
>> Cc: emacs-devel@gnu.org
>>
>> Colin Baxter <m43cap@yandex.com> writes:
>>
>> > > I guess we could put the version in the warning as well, but it
>> > > seems a little excessive.
>> >
>> > It could be useful in avoiding eye strain in searching the configure
>> > output for a mention of 'harfbuzz' :-)
>>
>> You donʼt run ./configure in a shell inside emacs? ;-)
>>
>> Eli, something like this OK for master?
>
> Yes, thanks.
Done as 56a7c73f9c
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-11-12 15:56 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-11-11 15:51 What version of harfbuzz is required? Colin Baxter
2020-11-11 16:04 ` Robert Pluim
2020-11-11 16:38 ` Colin Baxter
2020-11-12 11:06 ` Robert Pluim
2020-11-12 12:00 ` Colin Baxter
2020-11-12 14:44 ` Eli Zaretskii
2020-11-12 15:56 ` Robert Pluim
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).