* Re: trunk r116456: Improve dbus performance on synchronous calls
[not found] <E1WFMaG-0002WV-8L@vcs.savannah.gnu.org>
@ 2014-02-17 16:06 ` Michael Albinus
2014-02-17 16:17 ` Daniel Colascione
0 siblings, 1 reply; 6+ messages in thread
From: Michael Albinus @ 2014-02-17 16:06 UTC (permalink / raw)
To: Daniel Colascione; +Cc: emacs-devel
Daniel Colascione <dan.colascione@gmail.com> writes:
> (with-timeout ((if timeout (/ timeout 1000.0) 25))
> (while (eq (gethash key dbus-return-values-table :ignore) :ignore)
> - (let ((event (let ((inhibit-redisplay t) unread-command-events)
> - (read-event nil nil 0.1))))
> - (when (and event (not (ignore-errors (dbus-check-event event))))
> - (setq unread-command-events
> - (append unread-command-events (list event)))))))
> + (let ((event (let ((inhibit-redisplay t) unread-command-events)
> + (read-event nil nil check-interval))))
> + (when event
> + (push event unread-command-events))
> + (when (< check-interval 1)
> + (setf check-interval (* check-interval 1.05))))))
Why `push'? It adds the event on top of `unread-command-events',
changing the event order when there are already events in that list.
Best regards, Michael.
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: trunk r116456: Improve dbus performance on synchronous calls
2014-02-17 16:06 ` trunk r116456: Improve dbus performance on synchronous calls Michael Albinus
@ 2014-02-17 16:17 ` Daniel Colascione
2014-02-17 16:41 ` dancol
0 siblings, 1 reply; 6+ messages in thread
From: Daniel Colascione @ 2014-02-17 16:17 UTC (permalink / raw)
To: Michael Albinus; +Cc: emacs-devel
On 02/17/2014 08:06 AM, Michael Albinus wrote:
> Daniel Colascione <dan.colascione@gmail.com> writes:
>
>> (with-timeout ((if timeout (/ timeout 1000.0) 25))
>> (while (eq (gethash key dbus-return-values-table :ignore) :ignore)
>> - (let ((event (let ((inhibit-redisplay t) unread-command-events)
>> - (read-event nil nil 0.1))))
>> - (when (and event (not (ignore-errors (dbus-check-event event))))
>> - (setq unread-command-events
>> - (append unread-command-events (list event)))))))
>> + (let ((event (let ((inhibit-redisplay t) unread-command-events)
>> + (read-event nil nil check-interval))))
>> + (when event
>> + (push event unread-command-events))
>> + (when (< check-interval 1)
>> + (setf check-interval (* check-interval 1.05))))))
>
> Why `push'? It adds the event on top of `unread-command-events',
> changing the event order when there are already events in that list.
Hrm. I was getting it from sit-for:
(let ((read (read-event nil t seconds)))
(or (null read)
(progn
;; If last command was a prefix arg, e.g. C-u, push this event onto
;; unread-command-events as (t . EVENT) so it will be added to
;; this-command-keys by read-key-sequence.
(if (eq overriding-terminal-local-map universal-argument-map)
(setq read (cons t read)))
(push read unread-command-events)
nil)))
Speaking of which, shouldn't the dbus code just look like this?
(with-timeout ((if timeout (/ timeout 1000.0) 25))
(while (eq (gethash key dbus-return-values-table :ignore) :ignore)
(sit-for check-interval t)
(when (< check-interval 1)
(setf check-interval (* check-interval 1.05)))))
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: trunk r116456: Improve dbus performance on synchronous calls
2014-02-17 16:17 ` Daniel Colascione
@ 2014-02-17 16:41 ` dancol
2014-02-17 21:08 ` Michael Albinus
0 siblings, 1 reply; 6+ messages in thread
From: dancol @ 2014-02-17 16:41 UTC (permalink / raw)
To: Daniel Colascione; +Cc: Michael Albinus, emacs-devel
> On 02/17/2014 08:06 AM, Michael Albinus wrote:
>> Daniel Colascione <dan.colascione@gmail.com> writes:
>>
>>> (with-timeout ((if timeout (/ timeout 1000.0) 25))
>>> (while (eq (gethash key dbus-return-values-table :ignore)
>>> :ignore)
>>> - (let ((event (let ((inhibit-redisplay t) unread-command-events)
>>> - (read-event nil nil 0.1))))
>>> - (when (and event (not (ignore-errors (dbus-check-event event))))
>>> - (setq unread-command-events
>>> - (append unread-command-events (list event)))))))
>>> + (let ((event (let ((inhibit-redisplay t)
>>> unread-command-events)
>>> + (read-event nil nil check-interval))))
>>> + (when event
>>> + (push event unread-command-events))
>>> + (when (< check-interval 1)
>>> + (setf check-interval (* check-interval 1.05))))))
>>
>> Why `push'? It adds the event on top of `unread-command-events',
>> changing the event order when there are already events in that list.
>
> Hrm. I was getting it from sit-for:
Nope. You're right: fixed. Thanks for pointing that out.
> Speaking of which, shouldn't the dbus code just look like this?
No, that won't work. It's single-shot.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: trunk r116456: Improve dbus performance on synchronous calls
2014-02-17 16:41 ` dancol
@ 2014-02-17 21:08 ` Michael Albinus
2014-02-17 21:42 ` Daniel Colascione
2014-02-18 0:00 ` Stefan Monnier
0 siblings, 2 replies; 6+ messages in thread
From: Michael Albinus @ 2014-02-17 21:08 UTC (permalink / raw)
To: dancol; +Cc: emacs-devel
dancol@dancol.org writes:
>>> Why `push'? It adds the event on top of `unread-command-events',
>>> changing the event order when there are already events in that list.
>>
>> Hrm. I was getting it from sit-for:
>
> Nope. You're right: fixed. Thanks for pointing that out.
Maybe `sit-for' is wrong then as well? I haven't checked ever (and
situations, where `unread-command-events' contains more than one event
seem to be rare).
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: trunk r116456: Improve dbus performance on synchronous calls
2014-02-17 21:08 ` Michael Albinus
@ 2014-02-17 21:42 ` Daniel Colascione
2014-02-18 0:00 ` Stefan Monnier
1 sibling, 0 replies; 6+ messages in thread
From: Daniel Colascione @ 2014-02-17 21:42 UTC (permalink / raw)
To: Michael Albinus; +Cc: emacs-devel
On 02/17/2014 01:08 PM, Michael Albinus wrote:
> dancol@dancol.org writes:
>
>>>> Why `push'? It adds the event on top of `unread-command-events',
>>>> changing the event order when there are already events in that list.
>>>
>>> Hrm. I was getting it from sit-for:
>>
>> Nope. You're right: fixed. Thanks for pointing that out.
>
> Maybe `sit-for' is wrong then as well? I haven't checked ever (and
> situations, where `unread-command-events' contains more than one event
> seem to be rare).
sit-for is right: it's reading one event, then immediately sticking it
back on the queue. Push is exactly the right operation there.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: trunk r116456: Improve dbus performance on synchronous calls
2014-02-17 21:08 ` Michael Albinus
2014-02-17 21:42 ` Daniel Colascione
@ 2014-02-18 0:00 ` Stefan Monnier
1 sibling, 0 replies; 6+ messages in thread
From: Stefan Monnier @ 2014-02-18 0:00 UTC (permalink / raw)
To: Michael Albinus; +Cc: dancol, emacs-devel
> Maybe `sit-for' is wrong then as well?
No, the `push' is right: if unread-command-events is non-nil at that
point, it means it holds events which `read-event' did not read yet
(and hence come *after* the event we just received).
Stefan
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-02-18 0:00 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <E1WFMaG-0002WV-8L@vcs.savannah.gnu.org>
2014-02-17 16:06 ` trunk r116456: Improve dbus performance on synchronous calls Michael Albinus
2014-02-17 16:17 ` Daniel Colascione
2014-02-17 16:41 ` dancol
2014-02-17 21:08 ` Michael Albinus
2014-02-17 21:42 ` Daniel Colascione
2014-02-18 0:00 ` Stefan Monnier
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).