GNU Emacs NEWS -- history of user-visible changes.

Copyright (C) 2017-2020 Free Software Foundation, Inc.
See the end of the file for license conditions.

Please send Emacs bug reports to 'bug-gnu-emacs@gnu.org'.
If possible, use 'M-x report-emacs-bug'.

This file is about changes in Emacs version 27.

See file HISTORY for a list of GNU Emacs versions and release dates.
See files NEWS.26, NEWS.25, ..., NEWS.18, and NEWS.1-17 for changes
in older Emacs versions.

You can narrow news to a specific version by calling 'view-emacs-news'
with a prefix argument or by typing 'C-u C-h C-n'.

Temporary note:
+++ indicates that all relevant manuals in doc/ have been updated.
--- means no change in the manuals is needed.
When you add a new item, use the appropriate mark if you are sure it
applies, and please also update docstrings as needed.


* Installation Changes in Emacs 27.1

---
** Emacs now uses GMP, the GNU Multiple Precision library.
By default, if 'configure' does not find a suitable libgmp, it
arranges for the included mini-gmp library to be built and used.
The new 'configure' option '--without-libgmp' uses mini-gmp even if a
suitable libgmp is available.

---
** Emacs can now use HarfBuzz as its shaping engine.
The new configure option '--with-harfbuzz' adds support for the
HarfBuzz text shaping engine.  It is on by default; use './configure
--without-harfbuzz' to build without it.  The HarfBuzz text shaping is
available via new font backend drivers 'xfthb' and 'ftcrhb' for Xft
and Cairo drawings, respectively, and via the 'harfbuzz' backend on
MS-Windows.  The HarfBuzz text shaping is preferred to the previously
supported ones, so the font backends that use older shaping engines
(FLT on GNU and Unix systems and Uniscribe on MS-Windows) are not
enabled by default; they can be enabled via the 'font-backend' frame
parameter or via X resources.

---
** The new configure option '--with-json' adds native support for JSON.
This uses the Jansson library.  The option is on by default; use
'./configure --with-json=no' to build without Jansson support.  The
new JSON functions 'json-serialize', 'json-insert',
'json-parse-string', and 'json-parse-buffer' are typically much faster
than their Lisp counterparts from json.el.

---
** The configure option '--with-cairo' is no longer experimental.
This builds Emacs with Cairo drawing, and supports built-in printing
when Emacs is built with GTK+.  Some severe bugs in this build were
fixed, and we can therefore offer this to users without caveats.  Note
that building with Cairo enabled results in using Pango instead of
libXft for font support, and that Pango 1.44 has removed support for
bitmapped fonts.

+++
** Emacs now uses a "portable dumper" instead of unexec.
This improves compatibility with memory allocation on modern systems,
and in particular better supports the Address Space Layout
Randomization (ASLR) feature, a security technique used by most modern
operating systems.

When built with the portable dumping support (which is the default),
Emacs looks for the "emacs.pdmp" file, generated during the build, in
its data directory at startup, and loads the dumped state from there.
The new command-line argument '--dump-file=FILE' allows specifying a
non-default ".pdmp" file to load the state from; see the node
"(emacs) Initial Options" in the Emacs manual for more information.

An Emacs started via a dump file can create a new dump file only if it
was invoked with the '-batch' option.  (This is a temporary
limitation; we plan on lifting it in a future release.)

Although the portable dumper has been tested, it may have a bug on
unusual platforms.  If you require traditional unexec dumping you can
use the configure-time option '--with-dumping=unexec'; however, please
file a bug report describing the situation, as unexec dumping is
deprecated, and we plan on removing it in some future release.

---
** The new configure option '--enable-checking=structs' attempts to
check that the portable dumper code has been updated to match the last
change to one of the data structures that it relies on.

---
** The configure options '--enable-checking=conslist' and
'--enable-checking=xmallocoverrun' have been withdrawn.  The former
made Emacs irredeemably slow, and the latter made it crash.  Neither
option was useful with modern debugging tools such as AddressSanitizer.
(See "etc/DEBUG" for the details of using the modern replacements of the
removed configure options.)

---
** Emacs no longer defaults to using ImageMagick to display images.
This is due to security and stability concerns with ImageMagick.  To
override the default, use 'configure --with-imagemagick'.

---
** Several configure options now accept an option-argument 'ifavailable'.
For example, './configure --with-xpm=ifavailable' now configures Emacs
to attempt to use libxpm but to continue building even if libxpm is
absent.  The other affected options are '--with-gif', '--with-gnutls',
'--with-jpeg', '--with-png', and '--with-tiff'.

---
** The 'etags' program now uses the C library's regular expression matcher.
If it's possible, 'etags' will use the regexp matcher from the
system's standard C library, otherwise it will be linked with a
compatible regex substitute.  This lets developers maintain Emacs's
own regex code without having to also support other programs.  The new
configure option '--without-included-regex' forces 'etags' to use the C
library's regex matcher even if the regex substitute ordinarily would
be used to work around compatibility problems.

---
** Emacs has been ported to the '-fcheck-pointer-bounds' option of GCC.
This causes Emacs to check bounds of some arrays addressed by its
internal pointers, which can be helpful when debugging the Emacs
interpreter or modules that it uses.  If your platform supports it you
can enable it when configuring, e.g., './configure CFLAGS="-g3 -O2
-mmpx -fcheck-pointer-bounds"' on Intel MPX platforms.

---
** Emacs now normally uses a C pointer type instead of a C integer
type to implement Lisp_Object, which is the fundamental machine word
type internal to the Emacs Lisp interpreter.  This change aims to
catch typos and supports '-fcheck-pointer-bounds'.  The 'configure'
option '--enable-check-lisp-object-type' is therefore no longer as
useful and so is no longer enabled by default in developer builds,
to reduce differences between developer and production builds.

---
** The distribution tarball now has test cases; 'make check' runs them.
This is intended mostly to help developers.

---
** Emacs now requires GTK 2.24 and GTK 3.10 for the GTK 2 and GTK 3
builds respectively.

---
** New make target 'help' shows a summary of common make targets.

---
** Emacs now builds with dynamic module support by default.
Pass '--without-modules' to 'configure' to disable dynamic module
support.

---
** The ftx font backend driver is now obsolete and will be removed in
Emacs 28.


* Startup Changes in Emacs 27.1

+++
** Emacs can now use the XDG convention for init files.
The 'XDG_CONFIG_HOME' environment variable (which defaults to
"~/.config") specifies the XDG configuration parent directory.  Emacs
checks for "init.el" and other configuration files inside the "emacs"
subdirectory of 'XDG_CONFIG_HOME', i.e. "$XDG_CONFIG_HOME/emacs/init.el"

However, Emacs will still initially look for init files in their
traditional locations if "~/.emacs.d" or "~/.emacs" exist, even if
"$XDG_CONFIG_HOME/emacs" also exists.  This means that you must delete
or rename any existing "~/.emacs.d" and "~/.emacs" to enable use of
the XDG directory.

If "~/.emacs.d" does not exist, and Emacs has decided to use it
(i.e. "$XDG_CONFIG_HOME/emacs" does not exist), Emacs will create it.
Emacs will never create "$XDG_CONFIG_HOME/emacs".

Whichever directory Emacs decides to use, it will set
'user-emacs-directory' to point to it.

+++
** Emacs can now be configured using an early init file.
The file is called "early-init.el", in 'user-emacs-directory'.  It is
loaded very early in the startup process: before graphical elements
such as the tool bar are initialized, and before the package manager
is initialized.  The primary purpose is to allow customizing how the
package system is initialized given that initialization now happens
before loading the regular init file (see below).

We recommend against putting any customizations in this file that
don't need to be set up before initializing installed add-on packages,
because the early init file is read too early into the startup
process, and some important parts of the Emacs session, such as
'window-system' and other GUI features, are not yet set up, which could
make some customization fail to work.

+++
** Installed packages are now activated *before* loading the init file.
As a result of this change, it is no longer necessary to call
'package-initialize' in your init file.

Previously, a call to 'package-initialize' was automatically inserted
into the init file when Emacs was started.  This call can now safely
be removed.  Alternatively, if you want to ensure that your init file
is still compatible with earlier versions of Emacs, change it to:

(when (< emacs-major-version 27)
  (package-initialize))

However, if your init file changes the values of 'package-load-list'
or 'package-user-dir', or sets 'package-enable-at-startup' to nil then
it won't work right without some adjustment:
- You can move that code to the early init file (see above), so those
  settings apply before Emacs tries to activate the packages.
- You can use the new 'package-quickstart' so activation of packages
  does not need to pay attention to 'package-load-list' or
  'package-user-dir' any more.

---
** Emacs now notifies systemd when startup finishes or shutdown begins.
Units that are ordered after 'emacs.service' will only be started
after Emacs has finished initialization and is ready for use.
(If your Emacs is installed in a non-standard location and you copied the
emacs.service file to e.g. "~/.config/systemd/user/", you will need to copy
the new version of the file again.)


* Changes in Emacs 27.1

+++
** Emacs now supports resizing and rotating images without ImageMagick.
All modern systems support this feature.  (On GNU and Unix systems,
Cairo drawing or the XRender extension to X11 is required for this to
be available; the configure script will test for it and, if found,
enable scaling.)

The new function 'image-transforms-p' can be used to test whether any
given frame supports these capabilities.

+++
** The Network Security Manager now allows more fine-grained control
of what checks to run via the 'network-security-protocol-checks'
user option.

+++
** TLS connections have their security tightened by default.
Most of the checks for outdated, believed-to-be-weak TLS algorithms
and ciphers are now switched on by default.  (In addition, several new
TLS weaknesses are now warned about.)  By default, the NSM will
flag connections using these weak algorithms and ask users whether to
allow them.  To get the old behavior back (where certificates are
checked for validity, but no warnings about weak cryptography are
issued), you can either set 'network-security-protocol-checks' to nil,
or adjust the elements in that user option to only happen on the 'high'
security level (assuming you use the 'medium' level).

---
** New user option 'nsm-trust-local-network'.
Allows skipping Network Security Manager checks for hosts on your
local subnet(s).  It defaults to nil.  Usually, there should be no
need to set this non-nil, and doing that risks opening your local
network connections to attacks.  So be sure you know what you are
doing before changing the value.

+++
** Native GnuTLS connections can now use client certificates.
Previously, this support was only available when using the external
'gnutls-cli' command.  Call 'open-network-stream' with
':client-certificate t' to trigger looking up of per-server
certificates via 'auth-source'.

+++
** New user option 'network-stream-use-client-certificates'.
When non-nil, 'open-network-stream' performs lookups of client
certificates using 'auth-source' as if ':client-certificate t' were
specified if there is no explicit ':client-certificate' parameter.
Defaults to nil.

+++
** 'next/previous-multiframe-window' have been renamed.
The new names are as follows:

 'next-multiframe-window'     -> 'next-window-any-frame'
 'previous-multiframe-window' -> 'previous-window-any-frame'

The old function names are maintained as aliases for backward
compatibility.

** emacsclient
+++
*** emacsclient now supports the 'EMACS_SOCKET_NAME' environment variable.
The command-line argument '--socket-name' overrides it.
(The same behavior as for the pre-existing 'EMACS_SERVER_FILE' variable.)

+++
*** Emacs and emacsclient now default to "$XDG_RUNTIME_DIR/emacs".
This is used as the directory for client/server sockets, if Emacs is
running on a platform or environment that sets the 'XDG_RUNTIME_DIR'
environment variable to indicate where session sockets should go.
To get the old, less-secure behavior, you can set the
'EMACS_SOCKET_NAME' environment variable to an appropriate value.

---
*** When run by root, emacsclient no longer connects to non-root sockets.
(Instead you can use Tramp methods to run root commands in a non-root Emacs.)

---
** 'xft-ignore-color-fonts' now ignores even more color fonts.
There are color fonts that managed to bypass the existing checks,
causing XFT crashes, they are now filtered out.  Setting
'xft-ignore-color-fonts' to nil removes those checks, which might
require setting 'face-ignored-fonts' to filter out problematic fonts.
Known problematic fonts are "Noto Color Emoji" and "Emoji One".

---
** The GTK+ font chooser now respects 'face-ignored-fonts'.
When using 'menu-set-font' under GTK3, the available fonts are now
matched against 'face-ignored-fonts'.

---
** The GTK+ font chooser now remembers the previously selected settings.
It now remembers the name, size, style, etc.

+++
** New user option 'what-cursor-show-names'.
When non-nil, 'what-cursor-position' will show the name of the character
in addition to the decimal/hex/octal representation.  Default nil.

+++
** New function 'network-lookup-address-info'.
This does IPv4 and/or IPv6 address lookups on hostnames.

+++
** 'network-interface-list' can now return IPv4 and IPv6 addresses.
IPv4 and IPv6 addresses are now returned by default if available,
optionally including netmask/broadcast address information.

---
** Control of the threshold for using the 'distant-foreground' color.
The threshold for color distance below which the 'distant-foreground'
color of the face will be used instead of the foreground color can now
be controlled via the new variable 'face-near-same-color-threshold'.
The default value is 30000, as the previously hard-coded threshold.

+++
** The function 'read-passwd' uses "*" as default character to hide passwords.

** The function 'read-answer' now accepts not only single character
answers, but also function keys like 'F1', character events such as
'C-M-h', and control characters like 'C-h'.

** Lexical binding is now used when evaluating interactive Elisp forms.
More specifically, 'lexical-binding' is now used for 'M-:', '--eval',
as well as in 'lisp-interaction-mode' and 'ielm-mode', used in the
"*scratch*" and "*ielm*" buffers.

---
** The new user option 'tooltip-resize-echo-area' avoids truncating
tooltip text on GUI frames when tooltips are displayed in the echo
area.  Instead, it resizes the echo area as needed to accommodate the
full tool-tip text.

---
** Show mode line tooltips only if the corresponding action applies.
Customize the user option 'mode-line-default-help-echo' to restore the
old behavior where the tooltip text is also shown when the
corresponding action does not apply.

+++
** New hook 'server-after-make-frame-hook'.
This hook is a convenient place to perform initializations in daemon
mode which require GUI features to be available.  One example is
restoration of the previous session using the desktop.el package: put
the call to 'desktop-read' in this hook, if you want the GUI settings
to be restored, or if desktop.el needs to interact with you during
restoration of the session.

+++
** The functions 'set-frame-height' and 'set-frame-width' are now
commands, and will set the currently selected frame to the height/
width specified by the numeric prefix.

+++
** New function 'logcount' calculates an integer's Hamming weight.

+++
** New function 'libxml-available-p'.
This function returns non-nil if libxml support is both compiled in
and available at run time.  Lisp programs should use this function to
detect built-in libxml support, instead of testing for that
indirectly, e.g., by checking that functions like
'libxml-parse-html-region' return nil.

+++
** 'libxml-parse-xml-region' and 'libxml-parse-html-region' take
a parameter that's called DISCARD-COMMENTS, but it really only
discards the top-level comment.  Therefore this parameter is now
obsolete, and the new utility function 'xml-remove-comments' can be
used to remove comments before calling the libxml functions to parse
the data.

+++
** A new DOM (the XML/HTML document structure returned by functions
such as 'libxml-parse-html-region') traversal function has been added:
'dom-search', which takes a DOM and a predicate and returns all nodes
that match.

+++
** New function 'fill-polish-nobreak-p', to be used in 'fill-nobreak-predicate'.
It blocks line breaking after a one-letter word, also in the case when
this word is preceded by a non-space, but non-alphanumeric character.

+++
** The limit on repetitions in regexps has been raised to 2^16-1.
It was previously limited to 2^15-1.  For example, the following
regular expression was previously invalid, but is now accepted:

   x\{32768\}

---
** The German prefix and postfix input methods now support Capital sharp S.

---
** New input methods 'hawaiian-postfix' and 'hawaiian-prefix'.

---
** New input methods 'georgian-qwerty' and 'georgian-nuskhuri'.

---
** New input methods for several variants of the Sami language.
The Sami input methods include: 'norwegian-sami-prefix',
'bergsland-hasselbrink-sami-prefix', 'southern-sami-prefix',
'ume-sami-prefix', 'northern-sami-prefix', 'inari-sami-prefix',
'skolt-sami-prefix', and 'kildin-sami-prefix'.

+++
** Japanese environments use UTF-8 by default.
In Japanese environments that do not specify encodings and are not
based on MS-Windows, the default encoding is now utf-8 instead of
japanese-iso-8bit.

+++
** New function 'exec-path'.
This function by default returns the value of the corresponding
user option, but can optionally return the equivalent of 'exec-path'
from a remote host.

+++
** The function 'executable-find' supports an optional argument REMOTE.
This triggers searching for the program on the remote host as indicated by
'default-directory'.

+++
** New user option 'auto-save-no-message'.
When set to t, no message will be shown when auto-saving (default
value: nil).

---
** The value of 'make-cursor-line-fully-visible' can now be a function.
In addition to nil or non-nil, the value can now be a predicate
function.  Follow mode uses this to control scrolling of its windows
when the last screen line in a window is not fully visible.

+++
** New variable 'emacs-repository-branch'.
It reports the git branch from which Emacs was built.

+++
** New user option 'switch-to-buffer-obey-display-actions'.
When non-nil, 'switch-to-buffer' uses 'pop-to-buffer-same-window' that
respects display actions specified by 'display-buffer-alist' and
'display-buffer-overriding-action'.

+++
** The user option 'switch-to-visible-buffer' is now obsolete.
Customize 'switch-to-prev-buffer-skip' instead.

+++
** New user option 'switch-to-prev-buffer-skip'.
This user option allows specifying the set of buffers that may be
shown by 'switch-to-prev-buffer' and 'switch-to-next-buffer' more
stringently than the now obsolete 'switch-to-visible-buffer'.

** New 'flex' completion style.
An implementation of popular "flex/fuzzy/scatter" completion which
matches strings where the pattern appears as a subsequence.  Put
simply, makes "foo" complete to both "barfoo" and "frodo".  Add 'flex'
to 'completion-styles' or 'completion-category-overrides' to use it.

** The 'completion-common-part' face is now visible by default.

+++
** New face attribute ':extend' to control face extension at EOL.
The new face attribute ':extend' controls whether to use the face for
displaying the empty space beyond end of line (EOL) till the edge of
the window.  By default, this attribute is non-nil only for a small
number of faces, notably, 'region'; any other face that crosses end of
line will not affect the display of the empty space at EOL.  This is
to make Emacs behave more like other GUI applications with respect to
displaying faces that cross line boundaries.

This attribute behaves specially when theme definitions are applied:
if the theme doesn't specify an explicit value of this attribute for a
face, the value from the original face definition is inherited.
Consequently, a theme generally shouldn't specify this attribute
unless it has a good reason to do so.

** Connection-local variables
+++
*** Connection-local variables are applied by default like file-local
and directory-local variables.

+++
*** The macro 'with-connection-local-variables' has been renamed from
'with-connection-local-profiles'.  No argument PROFILES needed any longer.

---
** New user option 'next-error-verbose' controls when 'next-error'
outputs a message about the error locus.

---
** New user option 'grep-search-path' defines the directories searched for
grep hits (this used to be controlled by 'compilation-search-path').

---
** New user option 'emacs-lisp-compilation-search-path' defines the
directories searched for byte-compiler error messages (this used to
be controlled by 'compilation-search-path').

---
** Multicolor fonts such as "Noto Color Emoji" can be displayed on
Emacs configured with Cairo drawing and linked with cairo >= 1.16.0.

+++
** Emacs now optionally displays a fill column indicator.
This is similar to what 'fill-column-indicator' package provides, but
much faster and compatible with 'show-trailing-whitespace'.

Customize the buffer-local user options 'display-fill-column-indicator'
and 'display-fill-column-indicator-character' to activate the
indicator.

The indicator is not displayed at all in minibuffer windows and
in tooltips, as it is not useful there.

There are 2 new buffer local variables and 1 face to customize this
mode, they are described in the manual "(emacs) Display".

+++
** 'progress-reporter-update' now accepts an optional suffix string to display.

---
** New user option 'xref-file-name-display' controls the display of
file names in xref buffers.

** New user option 'byte-count-to-string-function'.
It is used for displaying file sizes and disk space in some cases.

+++
** Emacs now interprets RGB triplets like HTML, SVG, and CSS do.
The X convention previously used differed slightly, particularly for
RGB triplets with a single hexadecimal digit per component.

---
** The toolbar now shows the equivalent key binding in its tooltips.

---
** The File menu-bar menu was re-arranged.
Print menu items moved to submenu, and also added the new entries for tabs.

---
** 'scroll-lock-mode' is now bound to the 'Scroll_Lock' key globally.
Note that this key binding will not work on MS-Windows systems if
'w32-scroll-lock-modifier' is non-nil.

---
** 'global-set-key', called interactively, now no longer downcases a
key binding with an upper case letter - if you can type it, you can
bind it.

+++
** 'read-from-minibuffer' now works with buffer-local history variables.
The HIST argument of 'read-from-minibuffer' now works correctly with
buffer-local variables.  This means that different buffers can have
their own separated input history list if desired.

** 'backup-by-copying-when-privileged-mismatch' applies to file gid, too.
In addition to checking the file owner uid, Emacs also checks that the
group gid is not greater than 'backup-by-copying-when-privileged-mismatch';
if so, 'backup-by-copying-when-mismatch' will be forced on.


* Editing Changes in Emacs 27.1

+++
** When asked to visit a large file, Emacs now offers to visit it literally.
Previously, Emacs would only ask for confirmation before visiting
large files.  Now it also offers a third alternative: to visit the
file literally, as in 'find-file-literally', which speeds up
navigation and editing of large files.

+++
** 'zap-to-char' now uses the history of characters you used to zap to.
'zap-to-char' uses the new 'read-char-from-minibuffer' function to allow
navigating through the history of characters that have been input.
This is mostly useful for characters that have complex input methods
where inputting the character again may involve many keystrokes.

+++
** 'save-some-buffers' now has a new action in the prompt: 'C-f' will
exit the command and switch to the buffer currently being asked about.

---
** More commands support noncontiguous rectangular regions, namely
'upcase-dwim', 'downcase-dwim', 'capitalize-dwim', 'capitalize-region',
'upcase-initials-region', 'replace-string', 'replace-regexp', and
'delimit-columns-region'.

+++
** The new 'amalgamating-undo-limit' variable can be used to control
how many changes should be amalgamated when using the 'undo' command.

---
** The 'newline-and-indent' command (commonly bound to 'RET' in many
modes) now takes an optional numeric argument to specify how many
times is should insert newlines (and indent).

+++
** New command 'make-empty-file'.

---
** New variable 'x-wait-for-event-timeout'.
This controls how long Emacs will wait for updates to the graphical
state to take effect (making a frame visible, for example).

+++
** New user option 'electric-quote-replace-double'.
This option controls whether '"' is replaced in 'electric-quote-mode',
in addition to other quote characters.  If non-nil, ASCII double-quote
characters that quote text "like this" are replaced by double
typographic quotes, “like this”, in text modes, and in comments in
non-text modes.

---
** New user option 'flyspell-case-fold-duplications'.
This option controls whether Flyspell mode considers consecutive words
to be duplicates if they are not in the same case.  If non-nil, the
default, words are considered to be duplicates even if their letters'
case does not match.

---
** 'write-abbrev-file' now includes special properties.
'write-abbrev-file' now writes special properties like ':case-fixed'
for abbrevs that have them.

+++
** 'write-abbrev-file' skips empty tables.
'write-abbrev-file' now skips inserting a 'define-abbrev-table' form for
tables which do not have any non-system abbrevs to save.

+++
** The new functions and commands 'text-property-search-forward' and
'text-property-search-backward' have been added.  These provide an
interface that's more like functions like 'search-forward'.

---
** 'add-dir-local-variable' now uses dotted pair notation syntax to
write alists of variables to ".dir-locals.el".  This is the same
syntax that you can see in the example of a ".dir-locals.el" file in
the node "(emacs) Directory Variables" of the user manual.

+++
** Network connections using 'local' can now use IPv6.
'make-network-process' now uses the correct loopback address when
asked to use ':host 'local' and ':family 'ipv6'.

+++
** The new function 'replace-region-contents' replaces the current
region using a given replacement-function in a non-destructive manner
(in terms of 'replace-buffer-contents').

+++
** The command 'replace-buffer-contents' now has two optional
arguments mitigating performance issues when operating on huge
buffers.

+++
** Dragging 'C-M-mouse-1' now marks rectangular regions.

+++
** The command 'delete-indentation' now operates on the active region.
If the region is active, the command joins all the lines in the
region.  When there's no active region, the command works on the
current and the previous or the next line, as before.

+++
** You can now change the font size with the mouse wheel.
Scrolling the mouse wheel with the Ctrl key pressed will now act the
same as the 'C-x C-+' and 'C-x C--' commands.


* Changes in Specialized Modes and Packages in Emacs 27.1

---
** New HTML mode skeleton 'html-id-anchor'.
This new command (which inserts an <a id="foo">_</a> skeleton) is
bound to 'C-c C-c #'.

+++
** New command 'font-lock-refontify'.
This is an interactive convenience function to be used when developing
font locking for a mode.  It recomputes the font locking data and then
re-fontifies the buffer.

---
** Font Lock is smarter about fontifying unterminated strings and comments.
When you type a quote that starts a string, or a comment delimiter
that starts a comment, font-lock will not immediately refontify the
following characters in 'font-lock-string-face' or
'font-lock-comment-face'.  Instead, it will delay the fontification
beyond the current line to give you a chance to close the string or
comment.  This is controlled by the new user option
'jit-lock-antiblink-grace', which specifies the delay in seconds.  The
default is 2 seconds; set to nil to get back the old behavior.

---
** The 'C' command in 'tar-mode' will now preserve the timestamp of
the extracted file if the new user option 'tar-copy-preserve-time' is
non-nil.

---
** 'autoconf-mode' is now used instead of 'm4-mode' for the
"acinclude.m4" / "aclocal.m4" / "acsite.m4" files.

---
** On GNU/Linux, 'M-x battery' will now list all batteries, no matter
what they're named, and the 'battery-linux-sysfs-regexp' variable has
been removed.

** The 'list-processes' command now includes port numbers in the
network connection information (in addition to the host name).

** The 'cl' package is now officially deprecated in favor of 'cl-lib'.

---
** desktop

*** When called interactively with a prefix arg 'C-u', 'desktop-read'
now prompts the user for the directory containing the desktop file.

+++
** display-line-numbers-mode

*** New faces 'line-number-major-tick' and 'line-number-minor-tick',
and user options 'display-line-numbers-major-tick' and
'display-line-numbers-minor-tick' can be used to highlight the line
numbers of lines multiple of certain numbers.

*** New variable 'display-line-numbers-offset', when non-zero, adds
an offset to absolute line numbers.

+++
** winner

*** A new user option, 'winner-boring-buffers-regexp', has been added.

** table

*** 'table-generate-source' and friends now support outputting wiki and
mediawiki format tables.

---
** telnet-mode

*** Reverting a buffer in 'telnet-mode' will restart a closed connection.

** goto-addr

*** A way to more conveniently specify what URI address schemes should
be ignored has been added via the 'goto-address-uri-schemes-ignored'
variable.

+++
** tex-mode

*** 'latex-noindent-commands' controls indentation of certain commands.
You can use this new user option to control indentation of arguments of
\emph, \footnote, and similar commands.

** byte compiler

*** 'byte-compile-dynamic' is now obsolete.
This is because on the one hand it suffers from misbehavior in corner
cases that have plagued it for years, and on the other experiments indicated
that it doesn't bring any measurable benefit.

---
*** The 'g' keystroke in "*Compile-Log*" buffers has been bound to a
new command that will recompile the file previously compiled with 'M-x
byte-compile-file' and the like.

** compile.el

---
*** In 'compilation-error-regexp-alist', 'line' (and 'end-line') can
be functions.

+++
*** 'compilation-context-lines' can now take the value t; this is like
nil, but instead of scrolling the current line to the top of the
screen when there is no left fringe, it inserts a visible arrow before
column zero.

---
*** The new 'compilation-transform-file-match-alist' user option can
be used to transform file name matches compilation output, and remove
known false positives being recognized as warnings/errors.

** cl-lib.el

+++
*** 'cl-defstruct' has a new ':noinline' argument to prevent inlining
its functions.

+++
*** 'cl-defstruct' slots accept a ':documentation' property.

---
*** 'cl-values-list' will now signal an error if its argument isn't a list.

** doc-view.el

*** New commands 'doc-view-presentation' and 'doc-view-fit-window-to-page'.

*** Added support for password-protected PDF files.

*** A new user option 'doc-view-pdftotext-program-args' has been added
to allow controlling how the conversion to text is done.

** Ido

*** New user option 'ido-big-directories' to mark directories whose
names match certain regular expressions as big.  Ido won't attempt to
list the contents of such directories when completing file names.

** Minibuffer

+++
*** A new user option, 'minibuffer-beginning-of-buffer-movement', has
been introduced to allow controlling how the 'M-<' command works in
the minibuffer.  If non-nil, point will move to the end of the prompt
(if point is after the end of the prompt).

+++
*** When the minibuffer is active, echo-area messages are displayed at
the end of the minibuffer instead of hiding the minibuffer by the echo
area display.  The new user option 'minibuffer-message-clear-timeout'
controls how messages displayed in this situation are removed from the
minibuffer.

---
*** Minibuffer now uses 'minibuffer-message' to display error messages
at the end of the active minibuffer.

+++
*** 'y-or-n-p' now uses the minibuffer to read 'y' or 'n' answer.

---
*** Some commands that previously used 'read-char-choice' now read
a character using the minibuffer by 'read-char-from-minibuffer'.

** map.el

*** Now also understands plists.
*** Now defined via generic functions that can be extended via 'cl-defmethod'.
*** Deprecate the 'map-put' macro in favor of a new 'map-put!' function.
*** 'map-contains-key' now returns a boolean rather than the key.
*** Deprecate the 'testfn' args of 'map-elt' and 'map-contains-key'.
*** New generic function 'map-insert'.
+++
*** The 'type' arg can be a list '(hash-table :key1 VAL1 :key2 VAL2 ...)'.

** seq.el
New convenience functions 'seq-first' and 'seq-rest' give easy access
to respectively the first and all but the first elements of sequences.

The new predicate function 'seq-contains-p' should be used instead of
the now obsolete 'seq-contains'.

---
** Follow mode
In the current follow group of windows, "ghost" cursors are no longer
displayed in the non-selected follow windows.  To get the old behavior
back, customize 'follow-hide-ghost-cursors' to nil.

+++
** New variable 'warning-fill-column' for 'display-warning'.

** Windmove

---
*** 'windmove-create-window' when non-nil makes a new window.
This happens upon moving off the edge of the frame.

---
*** Windmove supports directional window display and selection.
The new command 'windmove-display-default-keybindings' binds default
keys with provided modifiers (by default, Shift-Meta) to the commands
that display the next buffer in the window at the specified direction.
This is like 'windmove-default-keybindings' that binds keys to commands
that select the window in the specified direction, but additionally it
displays the buffer from the next command in that window.  For example,
'S-M-right C-h i' displays the "*Info*" buffer in the right window,
creating the window if necessary.  A special key can be customized to
display the buffer in the same window, for example, 'S-M-0 C-h e'
displays the "*Messages*" buffer in the same window.  'S-M-t C-h C-n'
displays NEWS in a new tab.

---
*** Windmove also supports directional window deletion.
The new command 'windmove-delete-default-keybindings' binds default
keys with provided prefix (by default, 'C-x') and modifiers (by default,
'Shift') to the commands that delete the window in the specified
direction.  For example, 'C-x S-down' deletes the window below.
With a prefix arg 'C-u', also kills the buffer in that window.
With 'M-0', deletes the selected window and selects the window
that was in the specified direction.

---
*** New command 'windmove-swap-states-in-direction' binds default keys
to the commands that swap the states of the selected window with the
window in the specified direction.

---
*** Windmove code no longer used is now obsolete.
That includes the user option 'windmove-window-distance-delta' and the
functions 'windmove-coord-add', 'windmove-constrain-to-range',
'windmove-constrain-around-range', 'windmove-frame-edges',
'windmove-constrain-loc-for-movement', 'windmove-wrap-loc-for-movement',
'windmove-reference-loc' and 'windmove-other-window-loc'.

** Octave mode
The mode is automatically enabled in files that start with the
'function' keyword.

** project.el

*** New commands 'project-search' and 'project-query-replace-regexp'.
*** New user option 'project-read-file-name-function'.

** Etags

+++
*** 'next-file' is now an obsolete alias of 'tags-next-file'.

---
*** 'tags-loop-revert-buffers' is an obsolete alias of
'fileloop-revert-buffers'.

+++
*** The 'tags-loop-continue' function along with the
'tags-loop-operate' and 'tags-loop-scan' variables are now obsolete;
use the new 'fileloop-initialize' and 'fileloop-continue' functions
instead.

+++
*** etags is now able to read Zstandard-compressed files.

** bibtex

---
*** New commands 'bibtex-next-entry' and 'bibtex-previous-entry'.
In 'bibtex-mode-map', 'forward-paragraph' and 'backward-paragraph' are
remapped to these, respectively.

** Dired

---
*** On systems that support suid/guid files, Dired now fontifies the
permissions of such files with a special face 'dired-set-id'.

+++
*** New command 'dired-create-empty-file'.

+++
*** New command 'dired-number-of-marked-files'.
It is by default bound to '* N'.

---
*** The marking commands now report how many files were marked by the
command itself, not how many files are marked in total.

---
*** A new face, 'dired-special', is used to highlight sockets, named
pipes, block devices and character devices.

+++
*** The new user option 'dired-create-destination-dirs' controls whether
'dired-do-copy' and 'dired-rename-file' should create non-existent
directories in the destination.

+++
*** 'dired-dwim-target' can be customized to prefer either the next window,
or one of the most recently visited windows with a Dired buffer.

+++
*** When the new user option 'dired-vc-rename-file' is non-nil,
Dired performs file renaming using underlying version control system.

---
*** Zstandard compression is now supported for 'dired-do-compress' and
'dired-do-compress-to'.

** Find-Dired

---
*** New user option 'find-dired-refine-function'.
The default value is 'find-dired-sort-by-filename'.

---
*** New sorting options for the user option 'find-ls-option'.

** Change Logs and VC

---
*** New user option 'vc-tor'.
When non-nil, this user option causes the VC commands to communicate
with the repository via Tor's proxy, using the 'torsocks' wrapper
script.  The default is nil.

+++
*** New command 'log-edit-generate-changelog-from-diff', bound to 'C-c C-w'.
This generates ChangeLog entries from the VC fileset diff.

---
*** 'vc-dir' now shows a button allowing you to hide the stash list.
Controlled by user option 'vc-git-show-stash'.  Default t means show
the entire list as before.  An integer value limits the list length
(but still allows you to show the entire list via the button).

+++
*** Recording ChangeLog entries doesn't require an actual file.
If a ChangeLog file doesn't exist, and if the new user option
'add-log-dont-create-changelog-file' is non-nil (which is the
default), commands such as 'C-x 4 a' will add log entries to a
suitable named temporary buffer.  (An existing ChangeLog file will
still be used if it exists.)  Set the user option to nil to get the
previous behavior of always creating a buffer that visits a ChangeLog
file.

---
*** New user option 'vc-find-revision-no-save'.
With non-nil, 'vc-find-revision' doesn't write the created buffer to file.

---
*** 'vc-dir-ignore' now takes a prefix argument to ignore all marked files.

---
*** New user option 'vc-git-grep-template'.
This new user option allows customizing the default arguments passed to
'git-grep' when 'vc-git-grep' is used.

---
*** Command 'vc-git-stash' now respects marks in the "*vc-dir*" buffer.
When some files are marked, only those are stashed.
When no files are marked, all modified files are stashed, as before.

---
*** 'vc-git-stash' is now bound to 'C' in the stash headers.

--
*** Some stash keybindings are now available in the stash button.
'vc-git-stash' and 'vc-git-stash-snapshot' can now be run using 'C'
and 'S' respectively, including when there are no stashes.

---
*** The new hook 'vc-retrieve-tag-hook' runs after retrieving a tag.

---
*** 'vc-hg' now invokes 'smerge-mode' when visiting files.
Code that attempted to invoke 'smerge-mode' when visiting an Hg file
with conflicts existed in earlier versions of Emacs, but incorrectly
never detected a conflict due to invalid assumptions about cached
values.

+++
*** The Hg (Mercurial) back-end now supports 'vc-region-history'.
The 'C-x v h' command now works in buffers that visit files controlled
by Hg.

+++
*** The Hg (Mercurial) back-end now prompts for revision to merge when
you invoke 'C-x v m' ('vc-merge').

---
*** The Hg (Mercurial) back-end now uses tags, branches and bookmarks
instead of revision numbers as completion candidates when it prompts
for a revision.

+++
*** 'C-u C-x v D' ('vc-root-version-diff') prompts for two revisions
and compares their entire trees.

*** New user option 'vc-hg-revert-switches'.
It specifies switches to pass to Hg's 'revert' command.

*** 'C-x v M D' ('vc-diff-mergebase') and 'C-x v M L' ('vc-log-mergebase')
print diffs and logs between the merge base (common ancestor) of two
given revisions.

+++
*** The new 'd' command ('vc-dir-clean-files') in 'vc-dir-mode'
buffers will delete the marked files (or if no files are marked, the
file under point).  This command does not notify the VC backend, and
is mostly useful for unregistered files.

+++
*** New command 'vc-log-search' asks for a pattern, searches it
in the revision log, and displays matched log entries in the
log buffer.  For example, 'M-x vc-log-search RET bug#36644 RET'
displays all entries whose log messages match the bug number.
With a prefix argument asks for a command, so for example,
'C-u M-x vc-log-search RET git log -1 f302475 RET' will display
just one log entry found by its revision number.

+++
*** It is now possible to display a specific revision given by its ID.
If you invoke 'C-x v L' ('vc-print-root-log') with a numeric argument
of 1, as in 'C-1 C-x v L' or 'C-u 1 C-x v L', it asks for a revision
ID, and shows its log entry together with the diffs introduced by the
revision's commit.  (For some less capable VCSes, only the log entry
is shown.)

---
*** 'C-x v =' can now mimic Magit's diff format.
Set the new user option 'diff-font-lock-prettify' to t for that, see
below under "Diff mode".

---
*** The 'diff' function arguments OLD and NEW may each be a buffer
rather than a file, in non-interactive calls.  This change was made in
Emacs 24.1, but wasn't documented until now.

+++
*** New command 'diff-buffers' interactively diffs two buffers.

** Diff mode

+++
*** Hunks are now automatically refined by font-lock.
To disable refinement, set the new user option 'diff-refine' to nil.
To get back the old behavior where hunks are refined as you navigate
through a diff, set 'diff-refine' to the symbol 'navigate'.

+++
*** 'diff-auto-refine-mode' is deprecated in favor of 'diff-refine'.
It is no longer enabled by default and binding it no longer has any
effect.

+++
*** Better syntax highlighting of Diff hunks.
Fragments of source in Diff hunks are now by default highlighted
according to the appropriate major mode.  Customize the new user
option 'diff-font-lock-syntax' to nil to disable this.

---
*** File headers can be shortened, mimicking Magit's diff format.
To enable it, set the new user option 'diff-font-lock-prettify' to t.
On GUI frames, this option also displays the insertion and deletion
indicators on the left fringe.

+++
*** Prefix arg of 'diff-goto-source' means jump to the old revision
of the file under version control if point is on an old changed line,
or to the new revision of the file otherwise.

** Texinfo

+++
*** New function for inserting '@pxref', '@xref', or '@ref' commands.
The function 'texinfo-insert-dwim-@ref', bound to 'C-c C-c r' by
default, inserts one of three types of references based on the text
surrounding point, namely '@pxref' near a parenthesis, '@xref' at the
start of a sentence or at '(point-min)', else '@ref'.

** Browse-url

---
*** The function 'browse-url-emacs' can now visit a URL in selected window.
It now treats the optional 2nd argument to mean that the URL should be
shown in the currently selected window.

---
*** A new function, 'browse-url-add-buttons' can be used to add clickable
links to most ordinary special-mode buffers that display text that
have URLs embedded.  'browse-url-button-regexp' controls what's
considered a button.

---
*** New user option 'browse-url-secondary-browser-function'.
It can be set to a function that invokes an alternative browser.

** Comint

+++
*** 'send-invisible' is now an obsolete alias for 'comint-send-invisible'.
Also, 'shell-strip-ctrl-m' is declared obsolete.

+++
*** 'C-c .' ('comint-insert-previous-argument') no longer interprets '&'.
This feature caused problems when '&&' was present in the previous
command.  Since this command emulates 'M-.' in Bash and zsh, neither
of which treats '&' specially, the feature was removed for
compatibility with these shells.

+++
*** 'comint-insert-previous-argument' can now count arguments from the end.
By default, invoking 'C-c .' with a numeric argument N would copy the
Nth argument, counting from the first one.  But if the new user option
'comint-insert-previous-argument-from-end' is non-nil, it will copy
the Nth argument counting from the last one.  Thus 'C-c .' can now
better emulate 'M-.' in both Bash and zsh, since the former counts
from the beginning of the arguments, while the latter counts from the
end.

+++
*** 'comint-run' can now accept a list of switches to pass to the program.
'C-u M-x comint-run' will prompt for the switches interactively.

+++
*** Abnormal hook 'comint-password-function' has been added.
This hook permits a derived mode to supply a password for the
underlying command interpreter without prompting the user.  For
example, in 'sql-mode', the password for connecting to the database may
be stored in the connection wallet and may be passed on the command
line to start the SQL interpreter.  This is a potential security flaw
that could expose user's database passwords on the command line
through the use of a process list (Bug#8427).  With this hook, it is
possible to not pass the password on the command line and wait for the
program to prompt for the password.  When it does so, the password can
be supplied to the SQL interpreter without involving the user just as
if it had been supplied on the command line.

** SQL

---
*** SQL Indent Minor Mode
SQL Mode now supports the ELPA 'sql-indent' package for assisting
sophisticated SQL indenting rules.  Note, however, that SQL is not
like other programming languages like C, Java, or Python where code is
sparse and rules for formatting are fairly well established.  Instead
SQL is more like COBOL (from which it came) and code tends to be very
dense and line ending decisions driven by syntax and line length
considerations to make readable code.  Experienced SQL developers may
prefer to rely upon existing Emacs facilities for formatting code but
the 'sql-indent' package provides facilities to aid more casual SQL
developers layout queries and complex expressions.

---
**** 'sql-use-indent-support' (default t) enables SQL indention support.
The 'sql-indent' package from ELPA must be installed to get the
indentation support in 'sql-mode' and 'sql-interactive-mode'.

---
**** 'sql-mode-hook' and 'sql-interactive-mode-hook' changed.
Both hook variables have had 'sql-indent-enable' added to their
default values.  If you have existing customizations to these
variables, you should make sure that the new default entry is
included.

---
*** Connection Wallet
Database passwords can now by stored in NETRC or JSON data files that
may optionally be encrypted.  When establishing an interactive session
with the database via 'sql-connect' or a product specific function,
like 'sql-mysql' or 'sql-postgres', the password wallet will be
searched for the password.  The 'sql-product', 'sql-server',
'sql-database', and the 'sql-username' will be used to identify the
appropriate authorization.  This eliminates the discouraged practice of
embedding database passwords in your Emacs initialization.

See the 'auth-source' module for complete documentation on the file
formats.  By default, the wallet file is expected to be in the
'user-emacs-directory', named "sql-wallet" or ".sql-wallet", with
".json" (JSON) or no (NETRC) suffix.  Both file formats can optionally
be encrypted with GPG by adding an additional ".gpg" suffix.

** Term

---
*** 'term-read-noecho' is now obsolete, use 'read-passwd' instead.

+++
*** 'serial-term' now takes an optional parameter to leave the
emulator in line mode.

** Flymake

+++
*** The variable 'flymake-diagnostic-types-alist' is obsolete.
You should instead set properties on known diagnostic symbols, like
':error' and ':warning', as demonstrated in the Flymake manual.

+++
*** New user option 'flymake-start-on-save-buffer'.
Control whether Flymake starts checking the buffer on save.

---
*** Flymake and backend functions may exchange hints about buffer changes.
This enables more efficient backends.  See the docstring of
'flymake-diagnostic-functions' or the Flymake manual for details.

+++
*** 'flymake-start-syntax-check-on-newline' is now obsolete,
use 'post-self-insert-hook' to check on newline.

** Ruby

---
*** The Rubocop Flymake diagnostic function will only run Lint cops if
it can't find the config file.

---
*** Rubocop is called with 'bundle exec' if Gemfile mentions it.

---
*** New command 'ruby-find-library-file' bound to 'C-c C-f'.

** Package

---
*** Warn if "footer line" is missing, but still install package.
package.el used to refuse to install a package without the so-called
"footer line", which appears at the very end of the file:

;;; FILENAME ends here

package.el will now install packages without this line, but it will
issue a warning.  To avoid this warning, packages should keep the
"footer line".

Note that versions of Emacs older than 27.1 will not only refuse to
install packages without such a line -- they will be unable to parse
package data.  It is therefore recommended to keep this line.

+++
*** Change of 'package-check-signature' for packages with multiple sigs.
In previous Emacsen, t checked that all signatures are valid.
Now t only checks that at least one signature is valid and the new 'all'
value needs to be used if you want to enforce that all signatures
are valid.  This only affects packages with multiple signatures.

+++
*** The meaning of 'allow-unsigned' in 'package-check-signature' has
changed slightly: If a usable OpenPGP configuration can't be found
(for instance, if gpg isn't installed), it now has the same meaning as
nil.

---
*** New function 'package-get-version' lets packages query their own version.
Example use in auctex.el: '(defconst auctex-version (package-get-version))'

---
*** New 'package-quickstart' feature.
When 'package-quickstart' is non-nil, package.el precomputes a big
autoloads file so that activation of packages can be done much faster,
which can speed up your startup significantly.
It also causes user options like 'package-user-dir' and
'package-load-list' to be consulted when 'package-quickstart-refresh'
is run rather than at startup so you don't need to set them in your
early init file.

---
*** New function 'package-activate-all'.

+++
*** New functions for filtering packages list.
A new function has been added which allows users to filter the
packages list by name: 'package-menu-filter-by-name'.  By default, it
is bound to '/ n'.  Additionally, the function
'package-menu-filter-by-keyword' has been renamed from
'package-menu-filter'.  Its keybinding has also been changed to '/ k'
(from 'f').  To clear any of the two filters, the user can now call
the 'package-menu-clear-filter' function, bound to '/ /' by default.

---
*** Imenu support has been added to 'package-menu-mode'.

---
*** The package list can now be sorted by version or description.

+++
*** In Package Menu, 'g' now updates package data from archives.
Previously, 'g' invoked 'tabulated-list-revert' which did not update
the cached archive data.  It is now bound to 'revert-buffer', which
will update the data.

'package-menu-refresh' is an obsolete alias for 'revert-buffer'.

** Info

+++
*** Clicking on the left/right arrow icon in the Info tool-bar while
holding down the Ctrl key pops up a menu of previously visited Info nodes
where you can select a node to go back (like in browsers).

---
*** Info can now follow 'file://' protocol URLs.
The 'file://' URLs in Info documents can now be followed by passing
them to the 'browse-url' function, like the other protocols: 'ftp',
'http', and 'https'.  This allows having references to local HTML
files, for example.

---
** Display of man pages now limits the width for formatting pages.
The new user option 'Man-width-max' (80 by default) limits the number
of columns passed to the 'man' program for formatting man pages.  This
is to enhance readability when man pages are displayed in very wide
windows (which are customary with today's large displays).

** Xref

+++
*** New command 'xref-find-definitions-at-mouse'.
This command finds definitions of the identifier at the place of a
mouse click event, and is intended to be bound to a mouse event.

+++
*** Changing 'xref-marker-ring-length' works after xref.el is loaded.
Previously, setting 'xref-marker-ring-length' would only take effect
if set before xref.el was loaded.

---
*** 'xref-find-definitions' now sets the mark at the buffer position
where it was invoked.

---
*** New xref faces 'xref-file-header', 'xref-line-number', 'xref-match'.

---
*** New user option 'xref-show-definitions-function'.
It encapsulates the logic pertinent to showing the result of
'xref-find-definitions'.  The user can change it to customize its
behavior and the display of results.

---
*** Search results show the buffer even for one hit.
The search-type Xref commands (e.g. 'xref-find-references' or
'project-find-regexp') now show the results buffer even when there is
only one hit.  This can be altered by changing 'xref-show-xrefs-function'.

+++
*** Xref buffers support refreshing the search results.
A new command 'xref-revert-buffer' is bound to 'g'.

---
*** Imenu support has been added to 'xref--xref-buffer-mode'.

*** New generic method 'xref-backend-identifier-completion-ignore-case'.
Using it, the etags backend now honors 'tags-case-fold-search' during
identifier completion.

** Checkdoc

---
*** Checkdoc can now optionally spell-check doc strings.
Invoking 'checkdoc-buffer' with a non-nil TAKE-NOTES argument
(interactively, with a prefix arg) will now spell-check the doc
strings and report all the spelling mistakes.

** Icomplete

+++
*** New minor mode Fido mode.
This mode is based on Icomplete, and its name stands for "Fake Ido".
The point of this mode is to be an 'ido-mode' workalike, but provide
most of the functionality present in Icomplete that is not in
'ido-mode', while being much more compatible with all of Emacs's
completion facilities.

** Ecomplete

---
*** The Ecomplete sorting has changed to a decay-based algorithm.
This can be controlled by the new 'ecomplete-sort-predicate' user option.

---
*** The 'ecomplete-database-file' file is now placed in
"~/.emacs.d/ecompleterc" by default.  Of course it will still find it
if you have it in "~/.ecompleterc".

** Gnus

---
*** 'mm-uu-diff-groups-regexp' now defaults to matching all groups,
which means that "git am" diffs are recognized everywhere.

+++
*** Two new Gnus summary mode navigation commands have been added,
bound to the '[' and ']' keys: 'gnus-summary-prev-unseen-article' and
'gnus-summary-next-unseen-article'.  These take you (respectively) to
the previous unseen or next unseen article.  (These are the ones that
are marked with "." in the summary mode lines.)

+++
*** The Gnus user variable 'nnimap-expunge' supports three new values:
'never' for never expunging messages, 'immediately' for immediately
expunging deleted messages, and 'on-exit' to expunge deleted articles
when exiting the group's summary buffer.  Setting 'nnimap-expunge' to
nil or t is still supported but not recommended, since it may
result in Gnus expunging all messages that have been flagged as
deleted by any IMAP client (rather than just those that have been
deleted by Gnus).

+++
*** New user option 'gnus-use-atomic-windows' makes Gnus window layouts atomic.
See the "(elisp) Atomic Windows" node of the Elisp manual for details.

+++
*** There's a new value for 'gnus-article-date-headers',
'combined-local-lapsed', which will show both the time (in the local
timezone) and the lapsed time.

---
*** Gnus now maps imaps to 993 only on old MS-Windows versions.
The nnimap backend used to do this unconditionally to work around
problems on old versions of MS-Windows.  This is now done only for
Windows XP and older.

+++
*** The nnimap backend now has support for IMAP namespaces.
This feature can be enabled by setting the new 'nnimap-use-namespaces'
server variable to non-nil.

+++
*** A prefix argument to 'gnus-summary-limit-to-score' will limit in reverse.
Limit to articles with score "at or below" the SCORE argument rather
than "at or above".

---
*** The function 'gnus-score-find-favorite-words' has been renamed
from 'gnus-score-find-favourite-words'.

---
*** Gmane has been removed as an nnir backend, since Gmane no longer
has a search engine.

+++
*** Splitting mail on common mailing list headers has been added.
See the concept index in the Gnus manual for the 'match-list' entry.

+++
*** nil is no longer an allowed value for 'mm-text-html-renderer'.

+++
*** The default value of 'mm-inline-large-images' has changed from nil
to 'resize', which means that large images will be resized instead of
displayed with an external program by default.

+++
*** A new Gnus summary mode command, 'S A' ('gnus-summary-attach-article')
can be used to attach the current article(s) to a pre-existing Message
buffer, or create a new Message buffer with the article(s) attached.

+++
*** A new Gnus summary mode command, 'w' ('gnus-summary-browse-url')
scans the article buffer for URLs, and offers them to the user to open
with 'browse-url'.

---
*** New user option 'nnir-notmuch-filter-group-names-function'.
This option controls whether and how to use Gnus search groups as
'path:' search terms to 'notmuch'.

---
*** The buttons in the Gnus article buffer were formerly widgets
(i.e., buttons from widget.el).  This has now changed, and they are
now buttons (from button.el), and commands like 'TAB' now search for
buttons instead of widgets.  There should be no user-visible changes,
but out-of-tree code that relied on widgets being present might now
fail.

** erc

---
*** New hook 'erc-insert-done-hook'.
This hook is called after strings have been inserted into the buffer,
and is free to alter point and window configurations, as it's not
called from inside a 'save-excursion', as opposed to 'erc-insert-post-hook'.

---
*** 'erc-button-google-url' has been renamed to 'erc-button-search-url'
and its value has been changed to Duck Duck Go.

---
*** 'erc-send-pre-hook' and 'erc-send-this' have been obsoleted.
The user option to use instead to alter text to be sent is now
'erc-pre-send-functions'.

---
*** Improve matching/highlighting of nicknames.
Open and close parenthesis and apostrophe are not considered valid
nick characters anymore, matching the given grammar in RFC 2812
section 2.3.1.  This enables correct matching and highlighting of
nicks when they are surrounded by parentheses, like "(nick)", and when
adjacent to an apostrophe, like "nick's".

---
*** Set 'erc-button-url-regexp' to 'browse-url-button-regexp'
which better handles surrounding pair of parentheses.

** EUDC

---
*** XEmacs support has been removed.

** eww/shr

+++
*** The new user option 'shr-cookie-policy' can be used to control
when to use cookies when fetching embedded images.  The default is to
use them when the images are from the same domain as the main HTML
document.

+++
*** The 'eww' command can now create a new EWW buffer.
Invoking the command with a prefix argument will cause it to create a
new EWW buffer for the URL instead of reusing the default one.

+++
*** Clicking with the Ctrl key or 'C-u RET' on a link opens a new tab
when tab-bar-mode is enabled.

+++
*** The 'd' ('eww-download') command now falls back to current page's URL.
If this command is invoked with no URL at point, it now downloads the
current page instead of signaling an error.

*** When opening external links in eww/shr (typically with the
'C-u RET' keystroke on a link), the link will be flashed with the new
'shr-selected-link' face to give the user feedback that the command
has been executed.

+++
*** New user option 'shr-discard-aria-hidden'.
If set, shr will not render tags with attribute 'aria-hidden="true"'.
This attribute is meant to tell screen readers to ignore a tag.

+++
*** 'shr-external-browser' has been made into an obsolete alias
of 'browse-url-secondary-browser-function'.

---
*** 'shr-tag-ol' now respects the ordered list 'start' attribute.

---
*** The following tags are now handled: '<code>', '<abbr>', and '<acronym>'.

** Htmlfontify

+++
*** The functions 'hfy-color', 'hfy-color-vals' and
'hfy-fallback-color-values' and the variables 'hfy-fallback-color-map'
and 'hfy-rgb-txt-color-map' have been renamed from names that used
'colour' instead of 'color'.

+++
** Enriched mode supports the 'charset' text property.
You can add or modify the 'charset' text properties of text using the
'Edit->Text Properties->Special Properties' menu, or by invoking the
'facemenu-set-charset' command.  Documents in Enriched mode will be
saved with the charset properties, and those properties will be
restored when the file is visited.

** Smtpmail

---
*** Authentication mechanisms can be added via external packages, by
defining new 'cl-defmethod' of 'smtpmail-try-auth-method'.

+++
*** To always force smtpmail to send credentials over on the first
attempt when communicating with the SMTP server(s), the
'smtpmail-servers-requiring-authorization' user option can be used.

+++
*** smtpmail will now try resending mail when getting a transient "4xx"
error message from the SMTP server.  The new 'smtpmail-retries'
user option says how many times to retry.

** Footnote mode

---
*** Support Hebrew-style footnotes.

---
*** Footnote text lines are now aligned.
Can be controlled via the new user option 'footnote-align-to-fn-text'.

** CSS mode

---
*** A new command 'css-cycle-color-format' for cycling between color
formats (e.g. "black" => "#000000" => "rgb(0, 0, 0)") has been added,
bound to 'C-c C-f'.

---
*** CSS mode, SCSS mode, and Less CSS mode now have support for Imenu.

** SGML mode

---
*** 'sgml-quote' now handles double quotes and apostrophes
when escaping text and in addition all numeric entities when
unescaping text.

** Python mode

---
*** Python mode supports three different font lock decoration levels.
The maximum level is used by default; customize
'font-lock-maximum-decoration' to tone down the decoration.

---
*** New user option 'python-pdbtrack-kill-buffers'.
If non-nil, the default, buffers opened during pdbtracking session are
killed when pdbtracking session is finished.

---
*** New function 'python-shell-send-statement.
It sends the statement delimited by 'python-nav-beginning-of-statement'
and 'python-nav-end-of-statement' to the inferior Python process.

** Help

---
*** Descriptions of variables and functions give an estimated first release
where the variable or function appeared in Emacs.

---
*** Output format of 'C-h l' ('view-lossage') has changed.
For convenience, 'view-lossage' now displays the last keystrokes
and commands in the same format as the edit buffer of
'edit-last-kbd-macro'.  This makes it possible to copy the lines from
the buffer generated by 'view-lossage' to the "*Edit Macro*" buffer
created by 'edit-last-kbd-macro', and to save the macro by 'C-c C-c'.

---
*** The list of help commands produced by 'C-h C-h' ('help-for-help')
can now be searched via 'C-s'.

** Ibuffer

---
*** New filter 'ibuffer-filter-by-process'; bound to '/ E'.

---
*** All mode filters can now accept a list of symbols.
This means you can now easily filter several major modes, as well
as a single mode.

** Search and Replace

+++
*** Isearch supports a prefix argument for 'C-s' ('isearch-repeat-forward')
and 'C-r' ('isearch-repeat-backward').  With a prefix argument, these
commands repeat the search for the specified occurrence of the search string.
A negative argument repeats the search in the opposite direction.
This makes possible also to use a prefix argument for 'M-s .'
('isearch-forward-symbol-at-point') to find the next Nth symbol.
Also a prefix argument is supported for 'isearch-yank-until-char',
'isearch-yank-word-or-char', 'isearch-yank-symbol-or-char'.

+++
*** To go to the first/last occurrence of the current search string
is possible now with new commands 'isearch-beginning-of-buffer' and
'isearch-end-of-buffer' bound to 'M-s M-<' and 'M-s M->' in Isearch.
With a numeric argument, they go to the Nth absolute occurrence
counting from the beginning/end of the buffer.  This complements
'C-s'/'C-r' that searches for the next Nth relative occurrence
with a numeric argument.

+++
*** 'isearch-lazy-count' shows the current match number and total number
of matches in the Isearch prompt.  User options
'lazy-count-prefix-format' and 'lazy-count-suffix-format' define the
format of the current and the total number of matches in the prompt's
prefix and suffix, respectively.

---
*** 'lazy-highlight-buffer' highlights matches in the full buffer.
It is useful in combination with 'lazy-highlight-cleanup' customized to nil
to leave matches highlighted in the whole buffer after exiting isearch.
Also when 'lazy-highlight-buffer' prepares highlighting in the buffer,
navigation through the matches without flickering is more smooth.
'lazy-highlight-buffer-max-at-a-time' controls the number of matches to
highlight in one iteration while processing the full buffer.

+++
*** New isearch bindings.
'C-M-z' invokes new function 'isearch-yank-until-char', which yanks
everything from point up to but not including the specified
character into the search string.  This is especially useful for
keyboard macros.

'C-M-w' in isearch changed from 'isearch-del-char' to the new function
'isearch-yank-symbol-or-char'.  'isearch-del-char' is now bound to
'C-M-d'.

+++
'M-s h l' invokes 'highlight-lines-matching-regexp' using the search
string to highlight lines matching the search string.  This is similar
to the existing binding 'M-s h r' ('highlight-regexp') that highlights
JUST the search string.

+++
*** New user option 'isearch-yank-on-move' provides options t and 'shift'
to extend the search string by yanking text that ends at the new
position after moving point in the current buffer.  'shift' extends
the search string by motion commands while holding down the shift key.

+++
*** 'isearch-allow-scroll' provides a new option 'unlimited' to allow
scrolling any distance off screen.

---
*** Isearch now remembers the regexp-based search mode for words/symbols
and case-sensitivity together with search strings in the search ring.

---
*** Isearch now has its own tool-bar and menu-bar menu.

+++
*** 'flush-lines' prints and returns the number of deleted matching lines.

---
*** 'char-fold-to-regexp' now matches more variants of a base character.
The table used to check for equivalence of characters is now built
using the complete chain of unicode decompositions of a character,
rather than stopping after one level, such that searching for
e.g. "GREEK SMALL LETTER IOTA" will now also find "GREEK SMALL LETTER
IOTA WITH OXIA".

+++
*** New char-folding options: 'char-fold-include' lets you add ad hoc
foldings, 'char-fold-exclude' to remove foldings from default decomposition,
and 'char-fold-symmetric' to search for any of an equivalence class of
characters.  For example, with a nil value of 'char-fold-symmetric'
you can search for "e" to find "é", but not vice versa.  With a non-nil
value you can search for either, for example, you can search for "é"
to find "e".

** Debugger

+++
*** The Lisp Debugger is now based on 'backtrace-mode'.
Backtrace mode adds fontification and commands for changing the
appearance of backtrace frames.  See the node "(elisp) Backtraces" in
the Elisp manual for documentation of the new mode and its commands.

** Edebug

+++
*** 'edebug-eval-last-sexp' and 'edebug-eval-print-last-sexp' interactively
now take a zero prefix analogously to the non-Edebug counterparts.

+++
*** New faces 'edebug-enabled-breakpoint' and 'edebug-disabled-breakpoint'.
When setting breakpoints in Edebug, an overlay with these faces are
placed over the point in question, depending on whether they are
enabled or not.

+++
*** New command 'edebug-toggle-disable-breakpoint'.
This command allows you to disable a breakpoint temporarily.  This is
mainly useful with breakpoints that are conditional and would take
some time to recreate.

+++
*** New command 'edebug-unset-breakpoints'.
To clear all breakpoints in the current form, the 'U' command in
'edebug-mode', or 'M-x edebug-unset-breakpoints' can be used.

---
*** Re-instrumenting a function with Edebug will now try to preserve
previously-set breakpoints.  However, if the code has changed
substantially, this may not be possible.

+++
*** New command 'edebug-remove-instrumentation'.
This command removes Edebug instrumentation from all functions that
have been instrumented.

+++
*** The runtime behavior of Edebug's instrumentation can be changed
using the new variables 'edebug-behavior-alist',
'edebug-after-instrumentation-function' and
'edebug-new-definition-function'.  Edebug's behavior can be changed
globally or for individual definitions.

+++
*** Edebug's backtrace buffer now uses 'backtrace-mode'.
Backtrace mode adds fontification, links and commands for changing the
appearance of backtrace frames.  See the node "(elisp) Backtraces" in
the Elisp manual for documentation of the new mode and its commands.

The binding of 'd' in Edebug's keymap is now 'edebug-pop-to-backtrace'
which replaces 'edebug-backtrace'.  Consequently Edebug's backtrace
windows now behave like those of the Lisp Debugger and of ERT, in that
when they appear they will be the selected window.

The new 'backtrace-goto-source' command, bound to 's', works in
Edebug's backtraces on backtrace frames whose source code has
been instrumented by Edebug.

** Enhanced xterm support

---
*** New user option 'xterm-set-window-title' controls whether Emacs sets
the XTerm window title.  This feature is experimental and is disabled
by default.

** Grep

+++
*** 'rgrep', 'lgrep' and 'zrgrep' now hide part of the command line
that contains a list of ignored directories and files.
Clicking on the button with ellipsis unhides it.
The abbreviation can be disabled by the new user option
'grep-find-abbreviate'.  The new command
'grep-find-toggle-abbreviation' toggles it interactively.

---
*** 'grep-find-use-xargs' is now customizable with sorting options.

** ERT

+++
*** New variable 'ert-quiet' allows making ERT output in batch mode
less verbose by removing non-essential information.

+++
*** ERT's backtrace buffer now uses 'backtrace-mode'.
Backtrace mode adds fontification and commands for changing the
appearance of backtrace frames.  See the node "(elisp) Backtraces" in
the Elisp manual for documentation of the new mode and its commands.

** Gamegrid

---
*** Gamegrid now determines its default glyph size based on display
dimensions, instead of always using 16 pixels.  As a result, Tetris,
Snake and Pong are better playable on HiDPI displays.

---
*** 'gamegrid-add-score' can now sort scores from lower to higher.
This is useful for games where lower scores are better, like time-based games.

** Filecache

---
*** Completing file names in the minibuffer via 'C-TAB' now uses the
styles as configured by the user option 'completion-styles'.

** New macros 'thunk-let' and 'thunk-let*'.
These macros are analogue to 'let' and 'let*', but create bindings that
are evaluated lazily.

** next-error

+++
*** New user option 'next-error-find-buffer-function'.
The value should be a function that determines how to find the
next buffer to be used by 'next-error' and 'previous-error'.  The
default is to use the last buffer that navigated to the current
error.

+++
*** New command 'next-error-select-buffer'.
It can be used to set any buffer as the next one to be used by
'next-error' and 'previous-error'.

** nxml-mode

---
*** The default value of 'nxml-sexp-element-flag' is now t.
This means that pressing 'C-M-SPACE' now selects the entire tree by
default, and not just the opening element.

** Eshell

---
*** TAB completion uses the standard 'completion-at-point' rather than
'pcomplete'.  Its UI is slightly different but can be customized to
behave similarly, e.g. Pcomplete's default cycling can be obtained
with '(setq completion-cycle-threshold 5)'.

---
*** Eshell no longer re-initializes its keymap every call.
This allows users to use (define-key eshell-mode-map ...) as usual.
Some modules have their own minor mode now to account for these
changes.

+++
*** Expansion of history event designators is disabled by default.
To restore the old behavior, use

    (add-hook 'eshell-expand-input-functions
              #'eshell-expand-history-references)

---
*** The function 'eshell-uniquify-list' has been renamed from
'eshell-uniqify-list'.

---
*** The function 'eshell/kill' is now able to handle signal switches.
Previously 'eshell/kill' would fail if provided a kill signal to send
to the process.  It now accepts signals specified either by name or by
its number.

---
*** Emacs now follows symlinks in history-related files.
The files specified by 'eshell-history-file-name' and
'eshell-last-dir-ring-file-name' can include symlinks; these are now
followed when Emacs writes the relevant history variables to the disk.

** Shell

---
*** Program name completion inside remote shells works now as expected.

+++
*** The user option 'shell-file-name' can be set now as connection-local
variable for remote shells.  It still defaults to "/bin/sh".

** Single shell commands

+++
*** 'shell-command-dont-erase-buffer' accepts the value 'erase' to
force to erase the output buffer before execution of the command.

*** The new functions 'shell-command-save-pos-or-erase' and
'shell-command-set-point-after-cmd' control how point is handled
between two consecutive shell commands in the same buffer.

+++
*** 'async-shell-command-width' defines the number of display columns
available for output of asynchronous shell commands.

+++
*** Prompt for shell commands can now show the current directory.
Customize the new user option 'shell-command-prompt-show-cwd' to enable it.

** Pcomplete

---
*** The 'pcomplete' command is now obsolete.
The Pcomplete functionality can be obtained via 'completion-at-point'
instead, by adding 'pcomplete-completions-at-point' to
'completion-at-point-functions'.

---
*** The function 'pcomplete-uniquify-list' has been renamed from
'pcomplete-uniqify-list'.

---
*** 'pcomplete/make' now completes on targets in included files, recursively.
To recover the previous behavior, set new user option
'pcmpl-gnu-makefile-includes' to nil.

** Auth-source

---
*** The Secret Service backend supports the ':create' key now.

---
*** ".authinfo" and ".netrc" files now use a new mode: 'authinfo-mode'.
This is just like 'fundamental-mode', except that it hides passwords
under a "****" display property.  When the cursor moves to this text,
the real password is revealed (via 'reveal-mode').  The new
'authinfo-hidden' user option can be used to control what to hide.

** Tramp

+++
*** New connection method "nextcloud", which allows accessing OwnCloud
or NextCloud hosted files and directories.

+++
*** New connection method "rclone", which allows accessing system
storages via the 'rclone' program.  This feature is experimental.

+++
*** New connection method "sudoedit", which allows editing local files
with different user credentials.  Contrary to the "sudo" method, no
session is run permanently in the background.  This is for security
reasons.

+++
*** Connection methods "obex" and "synce" have been removed, because they
are obsoleted in GVFS.

+++
*** Validated passwords are saved by auth-source backends which support this.

+++
*** During user and host name completion in the minibuffer, results
from auth-source search are taken into account.  This can be disabled
by setting the user option 'tramp-completion-use-auth-sources' to nil.

+++
*** The user option 'tramp-ignored-file-name-regexp' allows disabling
Tramp for some look-alike remote file names.

+++
*** For some connection methods, like "su" or "sudo", the host name in
multi-hop file names must match the previous hop.  Default host names
are adjusted to the host name from the previous hop.

+++
*** A timeout has been added for the connection methods "sudo" and "doas".
The underlying session is disabled when the timeout expires.  This is
for security reasons.

+++
*** For some connection methods, like "sshx" or "plink", it is
possible to configure the remote login shell.  This avoids problems
with remote hosts, where "/bin/sh" is a link to a shell which
cooperates badly with Tramp.

+++
*** New commands 'tramp-rename-files' and 'tramp-rename-these-files'.
They allow saving remote files somewhere else when the corresponding
host is not reachable anymore.

** Rcirc

---
*** New user option 'rcirc-url-max-length'.
Setting this option to an integer causes URLs displayed in Rcirc
buffers to be truncated to that many characters.

---
*** The default '/quit' and '/part' reasons are now configurable.
Two new user options are provided for this:
'rcirc-default-part-reason' and 'rcirc-default-quit-reason'.

** Register

---
*** The return value of method 'register-val-describe' includes the
names of buffers shown by the windows of a window configuration.

** Message

---
*** Completion of email addresses can use the standard completion UI.
This is controlled by 'message-expand-name-standard-ui'.
With the standard UI the different sources (ecomplete, bbdb, and eudc)
are matched together and try to obey 'completion-styles'.
It should work for other completion front ends like Company.

---
*** 'message-mode' now supports highlighting citations of different depths.
This can be customized via the new user option
'message-cite-level-function' and the new 'message-cited-text-*' faces.

+++
*** Messages can now be systematically encrypted
when the PGP keyring contains a public key for every recipient.  To
achieve this, add 'message-sign-encrypt-if-all-keys-available' to
'message-send-hook'.

---
*** When replying a message that have addresses on the form
'"foo@bar.com" <foo@bar.com>', Message will elide the repeated "name"
from the address field in the response.

---
*** The default of 'message-forward-as-mime' has changed from t to nil
as it has been reported that many recipients can't read forwards that
are formatted as MIME digests.

+++
*** 'message-forward-included-headers' has changed its default to
exclude most headers when forwarding.

*** 'mml-secure-openpgp-sign-with-sender' sets also "gpg --sender".
When 'mml-secure-openpgp-sign-with-sender' is non-nil message sender's
email address (in addition to its old behavior) will also be used to
set gpg's "--sender email@domain" option.

The option is useful for two reasons when verifying the signature:

 1. GnuPG's TOFU statistics are updated for the specific user id
    (email) only.  See gpg(1) man page about "--sender".

 2. GnuPG's "--auto-key-retrieve" functionality can use WKD (web key
    directory) method for finding the signer's key.  You need GnuPG
    2.2.17 to fully benefit from this feature.  See gpg(1) man page for
    "--auto-key-retrieve".

---
** EasyPG

---
*** 'epa-pinentry-mode' is renamed to 'epg-pinentry-mode'.
It now applies to epg functions as well as epa functions.

---
*** The alias functions 'epa--encode-coding-string',
'epa--decode-coding-string', and 'epa--select-safe-coding-system' have
been removed.  Use 'encode-coding-string', 'decode-coding-string', and
'select-safe-coding-system' instead.

---
*** 'epg-context' structure supports now 'sender' slot.
The value of the new 'sender' slot (if a string) is used to set gpg's
"--sender" option.  This feature is used by
'mml-secure-openpgp-sign-with-sender'.  See gpg(1) manual page about
"--sender" for more information.

---
** Rmail

+++
*** New user option 'rmail-output-reset-deleted-flag'.
If this option is non-nil, messages appended to an output file by the
'rmail-output' command have their Deleted flag reset.

---
*** The command 'rmail-summary-by-senders' with an empty argument
selects the messages to summarize with a regexp that matches the
sender of the current message.

** Threads

+++
*** New variable 'main-thread' holds Emacs's main thread.
This is handy in Lisp programs that run on a non-main thread and want
to signal the main thread, e.g., when they encounter an error.

+++
*** 'thread-join' now returns the result of the finished thread.

+++
*** 'thread-signal' does not propagate errors to the main thread.
Instead, error messages are just printed in the main thread.

---
*** 'thread-alive-p' is now obsolete, use 'thread-live-p' instead.

+++
*** New command 'list-threads' shows Lisp threads.
See the current list of live threads in a tabulated-list buffer which
automatically updates.  In the buffer, you can use 's q' or 's e' to
signal a thread with quit or error respectively, or get a snapshot
backtrace with 'b'.

** thingatpt.el

---
*** 'thing-at-point' supports a new "thing" called 'uuid'.
A symbol 'uuid' can be passed to 'thing-at-point' and it returns the
UUID at point.

---
*** 'number-at-point' will now recognize hex numbers like 0xAb09 and #xAb09
and return them as numbers.

---
*** 'word-at-point' and 'sentence-at-point' accept NO-PROPERTIES.
Just like 'thing-at-point' itself.

** Interactive automatic highlighting

+++
*** 'highlight-regexp' can now highlight subexpressions.
The new command accepts a prefix numeric argument to choose the
subexpression.

** Mouse display of minor mode menu

---
*** 'minor-mode-menu-from-indicator' now displays full minor mode name.
When there is no menu for a mode, display the mode name after the
indicator instead of just the indicator (which is sometimes cryptic).

** rx

---
*** rx now handles raw bytes in character alternatives correctly,
when given in a string.  Previously, '(any "\x80-\xff")' would match
characters U+0080...U+00FF.  Now the expression matches raw bytes in
the 128...255 range, as expected.

---
*** The rx 'or' and 'seq' forms no longer require any arguments.
'(or)' produces a regexp that never matches anything, while '(seq)'
matches the empty string, each being an identity for the operation.
This also works for their aliases: '|' for 'or'; ':', 'and' and
'sequence' for 'seq'.
The symbol 'unmatchable' can be used as an alternative to '(or)'.

---
*** 'regexp' and new 'literal' accept arbitrary lisp as arguments.
In this case, 'rx' will generate code which produces a regexp string
at run time, instead of a constant string.

---
*** New rx extension mechanism: 'rx-define', 'rx-let', 'rx-let-eval'.
These macros add new forms to the rx notation.

+++
*** 'anychar' is now an alias for 'anything'.
Both match any single character; 'anychar' is more descriptive.

+++
*** New 'intersection' form for character sets.
With 'or' and 'not', it can be used to compose character-matching
expressions from simpler parts.

+++
*** 'not' argument can now be a character or single-char string.

** Frames

+++
*** New command 'make-frame-on-monitor' makes a frame on the specified monitor.

+++
*** New value of 'minibuffer' frame parameter 'child-frame'.
This allows creating and immediately parenting a minibuffer-only child
frame when making a frame.

---
*** New predicates 'display-blink-cursor-p' and 'display-symbol-keys-p'.
These predicates are to be preferred over 'display-graphic-p' when
testing for blinking cursor capability and the capability to have
symbols (e.g., '[return]', '[tab]', '[backspace]') as keys respectively.

** Tabulated List mode

+++
*** New user options for tabulated list sort indicators.
You can now customize which sorting indicator character to display
near the current column in Tabulated Lists (see user options
'tabulated-list-gui-sort-indicator-asc',
'tabulated-list-gui-sort-indicator-desc',
'tabulated-list-tty-sort-indicator-asc', and
'tabulated-list-tty-sort-indicator-desc').

+++
*** Two new commands and keystrokes have been added to the tabulated
list mode: 'w' (which widens the current column) and 'c' which makes
the current column contract.

+++
*** New function 'tabulated-list-clear-all-tags'.
This function clears all tags from the padding area in the current
buffer.  Tags are typically added by calling 'tabulated-list-put-tag'.

** Text mode

+++
*** 'text-mode-variant' is now obsolete, use 'derived-mode-p' instead.

** CUA mode

---
*** New user option 'cua-rectangle-terminal-modifier-key'.
This user option allows for the customization of the modifier key used
in a terminal frame.

** JS mode

---
*** JSX syntax is now automatically detected and enabled.
If a file imports Facebook's 'React' library, or if the file uses the
extension ".jsx", then various features supporting XML-like syntax
will be supported in 'js-mode' and derivative modes.  ('js-jsx-mode'
no longer needs to be enabled.)

---
*** New user option 'js-jsx-detect-syntax' disables automatic detection.
This is turned on by default.

---
*** New user option 'js-jsx-syntax' enables JSX syntax unconditionally.
This is off by default.

---
*** New variable 'js-jsx-regexps' controls JSX detection.

---
*** JSX syntax is now highlighted like SGML.

---
*** JSX code is properly indented in many more scenarios.
Previously, JSX indentation usually only worked when an element was
wrapped in parenthesis (e.g. in a 'return' statement or a function
call).  It would also fail in many intricate cases.  Now, indentation
should work anywhere without parenthesis; many more intricacies are
supported; and, indentation conventions align more closely with those
of the React developer community (see 'js-jsx-align->-with-<'),
otherwise still adhering to SGML conventions.

---
*** New user option 'js-jsx-align->-with-<' controls '>' indents.
Commonly in JSX code, a '>' on its own line is indented at the same
level as its opening '<'.  This is the new default for JSX.  This
behavior is slightly different than that used by SGML in Emacs, where
'>' is indented at the same level as attributes, which was also the
old default for JSX.

This is turned on by default.  To get back the old default indentation
behavior of aligning '>' with attributes, set 'js-jsx-align->-with-<'
to nil.

---
*** Indentation uses 'js-indent-level' instead of 'sgml-basic-offset'.
Since JSX is a syntax extension of JavaScript, it makes the most sense
for JSX expressions to be indented the same number of spaces as other
JS expressions.  This is a breaking change, but it probably aligns
with how you'd expect this indentation to behave.  If you want JSX to
be indented like JS, you won't need to change your config.

The old behavior can be emulated by controlling JSX indentation
independently of JS, by setting 'js-jsx-indent-level'.

---
*** New user option 'js-jsx-indent-level' for different JSX indentation.
If you wish to indent JSX by a different number of spaces than JS, set
this user option to the desired number.

---
*** New user option 'js-jsx-attribute-offset' for JSX attribute indents.

---
*** New variable 'js-syntactic-mode-name' controls mode name display.
Previously, the mode name was simply 'JavaScript'.  Now, when a syntax
extension like JSX is enabled, the mode name is 'JavaScript[JSX]'.
Set this variable to nil to disable the new behavior.

---
*** New function 'js-use-syntactic-mode-name' for deriving modes.
Packages deriving from 'js-mode' with 'define-derived-mode' should
call this function to add enabled syntax extensions to their mode
name, too.

** Autorevert

+++
*** New user option 'auto-revert-avoid-polling' for saving power.
When set to a non-nil value, buffers in Auto Revert mode are no longer
polled for changes periodically.  This reduces the power consumption
of an idle Emacs, but may fail on some network file systems; set
'auto-revert-notify-exclude-dir-regexp' to match files where
notification is not supported.  The default value is nil.

+++
*** New variable 'buffer-auto-revert-by-notification'.
A major mode can declare that notification on the buffer's default
directory is sufficient to know when updates are required, by setting
the new variable 'buffer-auto-revert-by-notification' to a non-nil
value.  Auto Revert mode can use this information to avoid polling the
buffer periodically when 'auto-revert-avoid-polling' is non-nil.

---
*** 'global-auto-revert-ignore-buffer' can now also be a predicate
function that can be used for more fine-grained control of which
buffers to auto-revert.

** auth-source-pass

+++
*** New user option 'auth-source-pass-filename'.
Allows setting the path to the password-store, defaults to
"~/.password-store".

+++
*** New user option 'auth-source-pass-port-separator'.
Specifies separator between host and port, defaults to colon ":".

---
*** Minimize the number of decryptions during password lookup.
This makes the package usable with physical tokens requiring touching
a sensor for every decryption.

---
*** 'auth-source-pass-get' is now autoloaded.

** Bookmarks

---
*** 'bookmark-file' and 'bookmark-old-default-file' are now obsolete
aliases of 'bookmark-default-file'.

---
*** New user option 'bookmark-watch-bookmark-file'.
When non-nil, watch whether the bookmark file has changed on disk.

---
*** The old bookmark file format is no longer supported.
This bookmark file format has not been used in Emacs since at least
version 19.34, released in 1996, and will no longer be automatically
converted to the new bookmark file format.

The following functions are now declared obsolete:
'bookmark-grok-file-format-version',
'bookmark-maybe-upgrade-file-format',
'bookmark-upgrade-file-format-from-0', and
'bookmark-upgrade-version-0-alist'.

---
** The mantemp.el library is now marked obsolete.
This library generates manual C++ template instantiations.  It should
no longer be useful on modern compilers, which do this automatically.

** Ispell

---
*** New hook 'ispell-change-dictionary-hook'.
This runs after changing the dictionary and could be used to
automatically spellcheck a buffer when changing language without
needing to advice 'ispell-change-dictionary'.

** scroll-lock

---
*** New command 'scroll-lock-next-line-always-scroll'.
This command is bound to 'S-down' and scrolls the buffer up in
particular when the end of the buffer is visible in the window.

** mwheel.el

---
*** 'mwheel-install' is now obsolete.
Use 'mouse-wheel-mode' instead.  Note that 'mouse-wheel-mode' is
already enabled by default on most graphical displays.

** Gravatar

+++
*** 'gravatar-cache-ttl' is now a number of seconds.
The previously used timestamp format of a list of integers is still
supported, but is deprecated.  The default value has not changed.

+++
*** 'gravatar-size' can now be nil.
This results in the use of Gravatar's default size of 80 pixels.

+++
*** The default fallback gravatar is now configurable.
This is possible using the new user options 'gravatar-default-image'
and 'gravatar-force-default'.

** ada-mode

---
*** The built-in ada-mode is now deleted.  The GNU ELPA package is a
good replacement, even in very large source files.

** time-stamp

---
*** New '%5z' conversion for 'time-stamp-format' gives time zone offset.
Specifying '%5z' in 'time-stamp-format' or 'time-stamp-pattern'
expands to the time zone offset, e.g., '+0100'.  The time zone used is
specified by 'time-stamp-time-zone'.

Because this feature is new in Emacs 27.1, do not use it in the local
variables section of any file that might be edited by an older version
of Emacs.

---
*** Some conversions recommended for 'time-stamp-format' have changed.
The new documented/recommended %-conversions are closer to those
used by 'format-time-string' and are compatible at least as far back
as Emacs 22.1 (released in 2007).

Uppercase abbreviated day name of week: was %3A, now %#a
Full day name of week: was %:a, now %:A
Uppercase abbreviated month name: was %3B, now %#b
Full month name: was %:b, now %:B
Four-digit year: was %:y, now %Y
Lowercase timezone name: was %z, now %#Z
Fully-qualified host name: was %s, now %Q
Unqualified host name: (was none), now %q
Login name: was %u, now %l
User's full name: was %U, now %L

Merely having '(add-hook 'before-save-hook 'time-stamp)' in your
Emacs init file does not expose you to this change.  However,
if you set 'time-stamp-format' or 'time-stamp-pattern' with a
file-local variable, you may need to update the value.

** mode-local

---
*** Declare 'define-overload' and 'define-child-mode' as obsolete.

---
*** Rename several internal functions to use a 'mode-local-' prefix.

** CC Mode

+++
*** You can now flag "wrong style" comments with 'font-lock-warning-face'.
To do this, use 'c-toggle-comment-style', if needed, to set the desired
default comment style (block or line); then set the user option
'c-mark-wrong-style-of-comment' to non-nil.

** Mailcap

---
*** The new function 'mailcap-file-name-to-mime-type' has been added.
It's a simple convenience function for looking up MIME types based on
file name extensions.

---
*** The default way the list of possible external viewers for MIME
types is sorted and chosen has changed.  Earlier, the most specific
viewer was chosen, even if there was a general override in "~/.mailcap".
For instance, if "/etc/mailcap" has an entry for "image/gif", that one
will be chosen even if you have an entry for "image/*" in your
"~/.mailcap" file.  But with the new method, entries from "~/.mailcap"
overrides all system and Emacs-provided defaults.  To get the old
method back, set 'mailcap-prefer-mailcap-viewers' to nil.

** URL

---
*** The 'file:' handler no longer looks for "index.html" in
directories if you ask it for a "file:///dir" URL.  Since this is a
low-level library, such decisions (if they are to be made at all) are
left to higher-level functions.


* New Modes and Packages in Emacs 27.1

** Tab Bars

+++
*** Tab Bar mode
The new command 'tab-bar-mode' enables the tab bar at the top of each
frame, where you can use tabs to switch between named persistent
window configurations.

The 'C-x t' sequence is the new prefix key for tab-related commands:
'C-x t 2' creates a new tab; 'C-x t 0' deletes the current tab;
'C-x t b' switches to buffer in another tab; 'C-x t f' and 'C-x t C-f'
edit file in another tab; and 'C-TAB' and 'S-C-TAB' switch to the next
or previous tab.  You can also switch between tabs and create/delete
tabs with a mouse.

Tab-related commands are available even when 'tab-bar-mode' is
disabled: by default, they enable 'tab-bar-mode' in that case.

The X resource "tabBar", class "TabBar" enables the tab bar
when its value is "on", "yes" or "1".

The user option 'tab-bar-position' specifies where to show the tab bar.

Read the new Info node "(emacs) Tab Bars" for full description
of all related features.

+++
*** Tab Line mode
The new command 'global-tab-line-mode' enables the tab line above each
window, which you can use to switch buffers in the window.  Selecting
the previous window-local tab is the same as typing 'C-x <LEFT>'
('previous-buffer'), selecting the next tab is the same as 'C-x <RIGHT>'
('next-buffer').  Both commands support a numeric prefix argument as
a repeat count.  Clicking on the plus icon adds a new buffer to the
window-local tab line of buffers.  Using the mouse wheel on the tab
line scrolls tabs.

+++
** fileloop.el lets one setup multifile operations like search&replace.

+++
** Emacs can now visit files in archives as if they were directories.
This feature uses Tramp and works only on systems which support GVFS,
i.e. GNU/Linux, roughly spoken.  See the node "(tramp) Archive file
names" in the Tramp manual for full documentation of these facilities.

+++
** New library for writing JSONRPC applications (https://jsonrpc.org).
The 'jsonrpc' library enables writing Emacs Lisp applications that
rely on this protocol.  Since the protocol is designed to be
transport-agnostic, the library provides an API to implement new
transport strategies as well as a separate API to use them.  A
transport implementation for process-based communication, such as is
used by the Language Server Protocol (LSP), is readily available.

+++
** Backtrace mode improves viewing of Elisp backtraces.
Backtrace mode adds pretty printing, fontification and ellipsis
expansion to backtrace buffers produced by the Lisp debugger, Edebug
and ERT.  See the node "(elisp) Backtraces" in the Elisp manual for
documentation of the new mode and its commands.

+++
** so-long.el helps to mitigate performance problems with long lines.
When 'global-so-long-mode' has been enabled, visiting a file with very
long lines will (subject to configuration) cause the user's preferred
'so-long-action' to be automatically invoked (by default, the buffer's
major mode is replaced by 'so-long-mode').  In extreme cases this can
prevent delays of several minutes, and make Emacs responsive almost
immediately.  Type 'M-x so-long-commentary' for full documentation.


* Incompatible Lisp Changes in Emacs 27.1

---
** Incomplete destructive splicing support has been removed.
Support for Common Lisp style destructive splicing (",.") was
incomplete and broken for a long time.  It has now been removed.

This means that backquote substitution now works for identifiers
starting with a period (".").  Consider the following example:

    (let ((.foo 42)) `,.foo)

In the past, this would have incorrectly evaluated to '(\,\. foo)',
but will now instead evaluate to '42'.

---
** The REGEXP in 'magic-mode-alist' is now matched case-sensitively.
Likewise for 'magic-fallback-mode-alist'.

+++
** 'add-hook' does not always add to the front or the end any more.
The replacement of 'append' with 'depth' implies that the function is
not always added to the very front (when append/depth is nil) or the
very end (when append/depth is t) any more because other functions on
the hook may have specified higher/lower depths.  This makes it
possible to control the ordering of functions more precisely, as was
already possible in 'add-function' and 'advice-add'.

---
** In 'compilation-error-regexp-alist' the old undocumented feature
where 'line' could be a function of 2 arguments has been dropped.

---
** 'define-fringe-bitmap' is always defined, even when Emacs is built
without any GUI support.

---
** Just loading a theme's file no longer activates the theme's settings.
Loading a theme with 'M-x load-theme' still activates the theme, as it
did before.  However, loading the theme's file with 'M-x load-file',
or using 'require' or 'load' in a Lisp program, doesn't actually apply
the theme's settings until you either invoke 'M-x enable-theme' or
type 'M-x load-theme'.  (In a Lisp program, calling 'enable-theme' or
invoking 'load-theme' with NO-ENABLE argument omitted or nil has the
same effect of activating a theme whose file has been loaded.)  The
special case of the 'user' theme is an exception: it is frequently
used for ad-hoc customizations, so the settings of that theme are by
default applied immediately.

The variable 'custom--inhibit-theme-enable' controls this behavior;
its default value changed in Emacs 27.1.

---
** The REPETITIONS argument of 'benchmark-run' can now also be a variable.

---
** Interpretation of relative 'HOME' directory has changed.
If "$HOME" is set to a relative file name, 'expand-file-name' now
interprets it relative to the directory where Emacs was started, not
relative to the 'default-directory' of the current buffer.  We recommend
always setting "$HOME" to an absolute file name, so that its meaning is
independent of where Emacs was started.

---
** 'file-name-absolute-p' no longer considers "~foo" to be an absolute
file name if there is no user named "foo".

+++
** The FILENAME argument to 'file-name-base' is now mandatory and no
longer defaults to 'buffer-file-name'.

+++
** File metadata primitives now signal an error if I/O, access, or
other serious errors prevent them from determining the result.
Formerly, these functions often (though not always) silently returned
nil.  For example, if there is an access error, I/O error or low-level
integer overflow when getting the attributes of a file F,
'(file-attributes F)' now signals an error instead of returning nil.
These functions still behave as before if the only problem is that the
file does not exist.  The affected primitives are
'directory-files-and-attributes', 'file-acl', 'file-attributes',
'file-modes', 'file-newer-than-file-p', 'file-selinux-context',
'file-system-info', and 'set-visited-file-modtime'.

---
** The function 'eldoc-message' now accepts a single argument.
Programs that called it with multiple arguments before should pass
them through 'format' first.  Even that is discouraged: for ElDoc
support, you should set 'eldoc-documentation-function' instead of
calling 'eldoc-message' directly.

---
** Old-style backquotes now generate an error.
They have been generating warnings for a decade.  To interpret
old-style backquotes as new-style, bind the new variable
'force-new-style-backquotes' to t.

---
** Defining a Common Lisp structure using 'cl-defstruct' or
'cl-struct-define' whose name clashes with a builtin type (e.g.,
'integer' or 'hash-table') now signals an error.

---
** When formatting a floating-point number as an octal or hexadecimal
integer, Emacs now signals an error if the number is too large for the
implementation to format.

+++
** 'logb' now returns infinity when given an infinite or zero argument,
and returns a NaN when given a NaN.  Formerly, it returned an extreme
fixnum for such arguments.

---
** Some functions and variables obsolete since Emacs 22 have been removed:
'archive-mouse-extract', 'assoc-ignore-case', 'assoc-ignore-representation',
'backward-text-line', 'blink-cursor', 'bookmark-exit-hooks',
'c-opt-op-identitier-prefix', 'comint-use-prompt-regexp-instead-of-fields',
'compilation-finish-function', 'count-text-lines', 'cperl-vc-header-alist',
'custom-face-save-command', 'cvs-display-full-path', 'cvs-fileinfo->full-path',
'delete-frame-hook', 'derived-mode-class', 'describe-char-after',
'describe-project', 'desktop-basefilename', 'desktop-buffer-handlers',
'desktop-buffer-misc-functions', 'desktop-buffer-modes-to-save',
'desktop-enable', 'desktop-load-default', 'dired-omit-files-p',
'disabled-command-hook', 'dungeon-mode-map', 'electric-nroff-mode',
'electric-nroff-newline', 'electric-perl-terminator', 'focus-frame',
'forward-text-line', 'generic-define-mswindows-modes',
'generic-define-unix-modes', 'generic-font-lock-defaults',
'goto-address-at-mouse', 'highlight-changes-colours',
'ibuffer-elide-long-columns', 'ibuffer-hooks', 'ibuffer-mode-hooks',
'icalendar-convert-diary-to-ical', 'icalendar-extract-ical-from-buffer',
'imenu-always-use-completion-buffer-p', 'ipconfig-program',
'ipconfig-program-options', 'isearch-lazy-highlight-cleanup',
'isearch-lazy-highlight-initial-delay', 'isearch-lazy-highlight-interval',
'isearch-lazy-highlight-max-at-a-time', 'iswitchb-use-fonts',
'latin1-char-displayable-p', 'mouse-wheel-click-button',
'mouse-wheel-down-button', 'mouse-wheel-up-button', 'new-frame',
'pascal-outline', 'process-kill-without-query',
'recentf-menu-append-commands-p', 'rmail-pop-password',
'rmail-pop-password-required', 'savehist-load', 'set-default-font',
'spam-list-of-processors', 'speedbar-add-ignored-path-regexp',
'speedbar-buffers-line-path', 'speedbar-ignored-path-expressions',
'speedbar-ignored-path-regexp', 'speedbar-line-path', 'speedbar-path-line',
'timer-set-time-with-usecs', 'tooltip-gud-display', 'tooltip-gud-modes',
'tooltip-gud-toggle-dereference', 'unfocus-frame', 'unload-hook-features-list',
'update-autoloads-from-directories', 'vc-comment-ring', 'vc-comment-ring-index',
'vc-comment-search-forward', 'vc-comment-search-reverse',
'vc-comment-to-change-log', 'vc-diff-switches-list', 'vc-next-comment',
'vc-previous-comment', 'view-todo', 'x-lost-selection-hooks',
'x-sent-selection-hooks'.

---
** Further functions and variables obsolete since Emacs 24 have been removed:
'default-directory-alist', 'dired-default-directory',
'dired-default-directory-alist', 'dired-enable-local-variables',
'dired-hack-local-variables', 'dired-local-variables-file',
'dired-omit-here-always'.

+++
** Garbage collection no longer treats miscellaneous objects specially;
they are now allocated like any other pseudovector.  As a result, the
'garbage-collect' and 'memory-use-count' functions no longer return a
'misc' component, and the 'misc-objects-consed' variable has been
removed.

+++
** Reversed character ranges are no longer permitted in 'rx'.
Previously, ranges where the starting character is greater than the
ending character were silently omitted.
For example, '(rx (any "@z-a" (?9 . ?0)))' would match '@' only.
Now, such 'rx' expressions generate an error.

---
** Internal 'rx' functions and variables have been removed,
as a consequence of an improved implementation.  Packages using
these should use the public 'rx' and 'rx-to-string' instead.
'rx-constituents' is still available for compatibility, but the new
extension mechanism is preferred: 'rx-define', 'rx-let' and
'rx-let-eval'.

+++
** 'text-mode' no longer sets the value of 'indent-line-function'.
The global value of 'indent-line-function', which defaults to
'indent-relative', will no longer be reset locally when turning on
'text-mode'.

To get back the old behavior, add a function to 'text-mode-hook' which
performs '(setq-local indent-line-function #'indent-relative)'.

---
** 'make-process' no longer accepts a non-nil ':stop' key.  This has
never worked reliably, and now causes an error.

+++
** 'eventp' no longer returns non-nil for lists whose car is nil.
This is consistent with the fact that nil, though a symbol, is not a
valid event type.

---
** The obsolete package xesam.el (since Emacs 24) has been removed.

+++
** The XBM image handler now accepts a ':stride' argument, which should
be specified in image specs representing the entire bitmap as a single
bool vector.

+++
** 'regexp-quote' may return its argument string.
If the argument needs no quoting, it can be returned instead of a copy.

+++
** Mouse scroll up and down with control key modifier changes font size.
Previously, the control key modifier was used to scroll up or down by
an amount which was close to near a full screen.  This is now instead
available by scrolling with the meta modifier key.

To get the old behavior back, customize the user option
'mouse-wheel-scroll-amount', or add the following to your init file:

(customize-set-variable 'mouse-wheel-scroll-amount
                        '(5 ((shift) . 1) ((control) . nil)))

By default, the font size will be changed in the window that the mouse
pointer is over.  To change this behavior, you can customize the user
option 'mouse-wheel-follow-mouse'.  Note that this will also affect
scrolling.

+++
** Mouse scroll up and down with control key modifier also works on images
where it scales the image under the mouse pointer.

---
** 'help-follow-symbol' now signals 'user-error' if point (or the
position pointed to by the argument POS) is not in a symbol.

---
** The options.el library has been removed.
It was obsolete since Emacs 22.1, replaced by customize.

---
** The tls.el and starttls.el libraries are now marked obsolete.
Use of built-in libgnutls based functionality (described in the Emacs
GnuTLS manual) is recommended instead.

---
** The url-ns.el library is now marked obsolete.
This library is used to open configuration files for the long defunct
web browser Netscape, and is no longer relevant.


* Lisp Changes in Emacs 27.1

+++
** Emacs Lisp integers can now be of arbitrary size.
Emacs uses the GNU Multiple Precision (GMP) library to support
integers whose size is too large to support natively.  The integers
supported natively are known as "fixnums", while the larger ones are
"bignums".  The new predicates 'bignump' and 'fixnump' can be used to
distinguish between these two types of integers.

All the arithmetic, comparison, and logical (a.k.a. "bitwise")
operations where bignums make sense now support both fixnums and
bignums.  However, note that unlike fixnums, bignums will not compare
equal with 'eq', you must use 'eql' instead.  (Numerical comparison
with '=' works on both, of course.)

Since large bignums consume a lot of memory, Emacs limits the size of
the largest bignum a Lisp program is allowed to create.  The
nonnegative value of the new variable 'integer-width' specifies the
maximum number of bits allowed in a bignum.  Emacs signals an integer
overflow error if this limit is exceeded.

Several primitive functions formerly returned floats or lists of
integers to represent integers that did not fit into fixnums.  These
functions now simply return integers instead.  Affected functions
include functions like 'encode-char' that compute code-points, functions
like 'file-attributes' that compute file sizes and other attributes,
functions like 'process-id' that compute process IDs, and functions like
'user-uid' and 'group-gid' that compute user and group IDs.

+++
** 'overflow-error' is now documented as a subcategory of 'range-error'.
Formerly it was undocumented, and was (incorrectly) a subcategory
of 'domain-error'.

** Time values

+++
*** New function 'time-convert' converts Lisp time values to Lisp
timestamps of various forms, including a new timestamp form '(TICKS
. HZ)' where TICKS is an integer and HZ a positive integer denoting a
clock frequency.

+++
*** Although the default timestamp format is still '(HI LO US PS)',
it is planned to change in a future Emacs version, to exploit bignums.
The documentation has been updated to mention that the timestamp
format may change and that programs should use functions like
'format-time-string', 'decode-time', and 'time-convert' rather than
probing the innards of a timestamp directly, or creating a timestamp
by hand.

+++
*** Decoded (calendrical) timestamps now have subsecond resolution.
This affects 'decode-time', which generates these timestamps, as well
as functions like 'encode-time' that accept them.  The subsecond info
is present as a '(TICKS . HZ)' value in the seconds element of a
decoded timestamp, and 'decode-time' has a new optional FORM argument
specifying the form of the seconds member.  For example, if X is the
timestamp '(1566009571321878186 . 1000000000)', which represents
"2019-08-17 02:39:31.321878186 UTC", '(decode-time X t t)' returns
'((31321878186 . 1000000000) 39 2 17 8 2019 6 nil 0)' instead of the
traditional '(31 39 2 17 8 2019 6 nil 0)' returned by plain
'(decode-time X t)'.  Although the default FORM is currently
'integer', which truncates the seconds to an integer and is the
traditional behavior, this default may change in future Emacs
versions, so callers requiring an integer should specify FORM
explicitly.

+++
*** 'encode-time' supports a new API '(encode-time TIME)'.
The old 'encode-time' API is still supported.

+++
*** A new package to parse ISO 8601 time, date, durations and
intervals has been added.  The main function to use is
'iso8601-parse', but there's also 'iso8601-parse-date',
'iso8601-parse-time', 'iso8601-parse-duration' and
'iso8601-parse-interval'.  All these functions return decoded time
structures, except the final one, which returns three of them (start,
end and duration).

+++
*** 'time-add', 'time-subtract', and 'time-less-p' now accept
infinities and NaNs too, and propagate them or return nil like
floating-point operators do.  If both arguments are finite, these
functions now return exact results instead of rounding in some cases,
and they also avoid excess precision when that is easy.

+++
*** New function 'time-equal-p' compares time values for equality.

+++
*** 'format-time-string' supports a new conversion specifier flag '+'
that acts like the '0' flag but also puts a '+' before nonnegative
years containing more than four digits.  This is for compatibility
with POSIX.1-2017.

+++
*** To access (or alter) the elements of a decoded time value, the
'decoded-time-second', 'decoded-time-minute', 'decoded-time-hour',
'decoded-time-day', 'decoded-time-month', 'decoded-time-year',
'decoded-time-weekday', 'decoded-time-dst' and 'decoded-time-zone'
accessors can be used.

*** The new functions 'date-days-in-month' (which will say how many
days there are in a month in a specific year), 'date-ordinal-to-time'
(that computes the date of an ordinal day), 'decoded-time-add' (for
doing computations on a decoded time structure), 'make-decoded-time'
(for making a decoded time structure with only the given keywords
filled out), and 'encoded-time-set-defaults' (which fills in nil
elements as if it's midnight January 1st, 1970) have been added.

+++
*** In the DST slot, 'encode-time' and 'parse-time-string' now return -1
if it is not known whether daylight saving time is in effect.
Formerly they were inconsistent: 'encode-time' returned t in this
situation, whereas 'parse-time-string' returned nil.  Now they
consistently use nil to mean that DST is not in effect, and use -1
to mean that it is not known whether DST is in effect.

+++
** New macro 'benchmark-progn'.
This macro works like 'progn', but messages how long it takes to
evaluate the body forms.  The value of the last form is the return
value.

+++
** New function 'read-char-from-minibuffer'.
This function works like 'read-char', but uses 'read-from-minibuffer'
to read a character, so it maintains a history that can be navigated
via usual minibuffer keystrokes 'M-p'/'M-n'.

---
** New variables 'set-message-function' and 'clear-message-function'
can be used to specify functions to show and clear messages that
normally are displayed in the echo area.

+++
** 'setq-local' can now set an arbitrary number of variables, which
makes the syntax more like 'setq'.

---
** 'reveal-mode' can now also be used for more than to toggle between
invisible and visible: It can also toggle 'display' properties in
overlays.  This is only done on 'display' properties that have the
'reveal-toggle-invisible' property set.

+++
** 'process-contact' now takes an optional NO-BLOCK argument to allow
not waiting for a process to be set up.

---
** New variable 'read-process-output-max' controls sub-process throughput.
This variable determines how many bytes can be read from a sub-process
in one read operation.  The default, 4096 bytes, was previously a
hard-coded constant.  Setting it to a larger value might enhance
throughput of reading from sub-processes that produces vast
(megabytes) amounts of data in one go.

+++
** The new user option 'quit-window-hook' is now run first when
executing the 'quit-window' command.

** The user options 'help-enable-completion-auto-load',
'help-enable-auto-load' and 'vhdl-project-auto-load', as well as the
function 'vhdl-auto-load-project' have been renamed to have "autoload"
without the hyphen in their names.  Obsolete aliases from the old
names have been added.

+++
** Buttons (created with 'make-button' and related functions) can
now use the 'button-data' property.  If present, the data in this
property will be passed on to the 'action' function instead of the
button itself in 'button-activate'.

+++
** 'defcustom' now takes a ':local' keyword that can be either t or
'permanent', which mean that the variable should be automatically
buffer-local.  'permanent' also sets the variable's 'permanent-local'
property.

+++
** The new macro 'with-suppressed-warnings' can be used to suppress
specific byte-compile warnings.

+++
** The new macro 'ignore-error' is like 'ignore-errors', but takes a
specific error condition, and will only ignore that condition.  (This
can also be a list of conditions.)

---
** The new function 'byte-compile-info-message' can be used to output
informational messages that look pleasing during the Emacs build.

---
** New 'help-fns-describe-variable-functions' hook.
It makes it possible to add metadata information to 'describe-variable'.

** i18n (internationalization)

---
*** 'ngettext' can be used now to return the right plural form
according to the given numeric value.

+++
** 'inhibit-null-byte-detection' is renamed to 'inhibit-nul-byte-detection'.

+++
** 'self-insert-command' takes the char to insert as (optional) argument.

+++
** 'lookup-key' can take a list of keymaps as argument.

+++
** 'condition-case' now accepts t to match any error symbol.

+++
** New function 'proper-list-p'.
Given a proper list as argument, this predicate returns its length;
otherwise, it returns nil.  'format-proper-list-p' is now an obsolete
alias for the new function.

---
** 'define-minor-mode' automatically documents the meaning of ARG.

+++
** The function 'recenter' now accepts an additional optional argument.
By default, calling 'recenter' will not redraw the frame even if
'recenter-redisplay' is non-nil.  Call 'recenter' with the new second
argument non-nil to force redisplay per 'recenter-redisplay's value.

+++
** New functions 'major-mode-suspend' and 'major-mode-restore'.
Use them when switching temporarily to another major mode, e.g. for
'hexl-mode', or to switch between 'c-mode' and 'image-mode' in XPM.

+++
** New macro 'dolist-with-progress-reporter'.
This works like 'dolist', but reports progress similar to
'dotimes-with-progress-reporter'.

+++
** New hook 'after-delete-frame-functions'.
This works like 'delete-frame-functions', but runs after the frame to
be deleted has been made dead and removed from the frame list.

---
** The function 'provided-mode-derived-p' was extended to support aliases.
The function now returns non-nil when the argument MODE is derived
from any alias of any of MODES.

+++
** New frame focus state inspection interface.
The hooks 'focus-in-hook' and 'focus-out-hook' are now obsolete.
Instead, attach to 'after-focus-change-function' using 'add-function'
and inspect the focus state of each frame using 'frame-focus-state'.

+++
** Emacs now requests and recognizes focus-change notifications from TTYs.
On terminal emulators that support the feature, Emacs can now support
'focus-in-hook' and 'focus-out-hook' for TTY frames.

+++
** Window-specific face remapping.
Face specifications (of the kind used in 'face-remapping-alist')
now support filters, allowing faces to vary between different windows
displaying the same buffer.  See the node "(elisp) Face Remapping"
of the Emacs Lisp Reference manual for more detail.

+++
** Window change functions have been redesigned.
Hooks reacting to window changes run now only when redisplay detects
that a change has actually occurred.  Six hooks are now provided:
'window-buffer-change-functions' (run after window buffers have
changed), 'window-size-change-functions' (run after a window was
assigned a new buffer or size), 'window-configuration-change-hook'
(like the former but run also when a window was deleted),
'window-selection-change-functions' (run when the selected window
changed) and 'window-state-change-functions' and
'window-state-change-hook' (run when any of the preceding ones is
run).  Applications can enforce running the latter two using the new
function 'set-frame-window-state-change'.  'window-scroll-functions'
are unaffected by these changes.

In addition, a number of functions now allow the caller to detect what
has changed since last redisplay: 'window-old-buffer' returns for any
window the buffer it showed at that time.  'old-selected-window' and
'old-selected-frame' return the window and frame that were selected
during last redisplay.  'window-old-pixel-width' (renamed from
'window-pixel-width-before-size-change'), 'window-old-pixel-height'
(renamed from 'window-pixel-height-before-size-change'),
'window-old-body-pixel-width' and 'window-old-body-pixel-height'
return the total and body sizes of any window during last redisplay.

Also 'run-window-configuration-change-hook' is declared obsolete.

See the section "(elisp) Window Hooks" in the Elisp manual for a
detailed explanation of the new behavior.

+++
** Scroll bar and fringe settings can now be made persistent for windows.
The functions 'set-window-scroll-bars' and 'set-window-fringes' now
have a new optional argument that makes the settings they produce
reliably survive subsequent invocations of 'set-window-buffer'.

+++
** New user option 'resize-mini-frames'.
This option allows automatically resizing minibuffer-only frames
similarly to how minibuffer windows are resized on "normal" frames.

+++
** New buffer display action function 'display-buffer-in-direction'.
This function allows specifying the location of the window chosen by
'display-buffer' in various ways.

+++
** New buffer display action alist entry 'dedicated'.
Such an entry allows specifying the dedicated status of a window
created by 'display-buffer'.

+++
** New buffer display action alist entry 'window-min-height'.
Such an entry allows specifying a minimum height of the window used
for displaying a buffer.  'display-buffer-below-selected' is the only
action function to respect it at the moment.

+++
** New buffer display action alist entry 'direction'.
This entry is used to specify the location of the window chosen by
'display-buffer-in-direction'.

+++
** Additional meaning of display action alist entry 'window'.
A 'window' entry can now also specify a reference window for
'display-buffer-in-direction'.

+++
** The function 'assoc-delete-all' now takes an optional predicate argument.

+++
** New function 'string-distance' to calculate the Levenshtein distance
between two strings.

+++
** 'print-quoted' now defaults to t, so if you want to see
'(quote x)' instead of 'x you will have to bind it to nil where applicable.

+++
** Numbers formatted via '%o' or '%x' are now formatted as signed integers.
This avoids problems in calls like '(read (format "#x%x" -1))', and is
more compatible with bignums.  To get the traditional machine-dependent
behavior, set the experimental variable 'binary-as-unsigned' to t,
and if the new behavior breaks your code please email
<32252@debbugs.gnu.org>.  Because '%o' and '%x' can now format signed
integers, they now support the '+' and space flags.

+++
** In Emacs Lisp mode, symbols with confusable quotes are highlighted.
For example, the first character in '‘foo' would be highlighted in
'font-lock-warning-face'.

+++
** Omitting variables after '&optional' and '&rest' is now allowed.
For example '(defun foo (&optional))' is no longer an error.  This is
sometimes convenient when writing macros.  See the ChangeLog entry
titled "Allow '&rest' or '&optional' without following variable
(Bug#29165)" for a full listing of which arglists are accepted across
versions.

---
** Internal parsing commands now use 'syntax-ppss' and disregard
'open-paren-in-column-0-is-defun-start'.  This affects mostly things like
'forward-comment', 'scan-sexps', and 'forward-sexp' when parsing backward.
The new variable 'comment-use-syntax-ppss' can be set to nil to recover
the old behavior if needed.
This also means that there is no longer any need to precede opening
brackets at the start of a line inside documentation strings with a
backslash, although there is no harm in doing so to make the code
easier to edit with an older Emacs version.

---
** The 'server-name' and 'server-socket-dir' variables are set when a
socket has been passed to Emacs.

---
** The 'file-system-info' function is now available on all platforms.
instead of just Microsoft platforms.  This fixes a 'get-free-disk-space'
bug on OS X 10.8 and later.

---
** The function 'get-free-disk-space' returns now a non-nil value for
remote systems, which support this check.

+++
** 'memory-limit' now returns a better estimate of memory consumption.

+++
** When interpreting 'gc-cons-percentage', Emacs now estimates the
heap size more often and (we hope) more accurately.  E.g., formerly
'(progn (let ((gc-cons-percentage 0.8)) BODY1) BODY2)' continued to use
the 0.8 value during BODY2 until the next garbage collection, but that
is no longer true.  Applications may need to re-tune their GC tricks.

+++
** New macro 'combine-change-calls' arranges to call the change hooks
('before-change-functions' and 'after-change-functions') just once
each around a sequence of lisp forms, given a region.  This is
useful when a function makes a possibly large number of repetitive
changes and the change hooks are time consuming.

+++
** 'eql', 'make-hash-table', etc. now treat NaNs consistently.
Formerly, some of these functions ignored signs and significands of
NaNs.  Now, all these functions treat NaN signs and significands as
significant.  For example, '(eql 0.0e+NaN -0.0e+NaN)' now returns nil
because the two NaNs have different signs; formerly it returned t.
Also, Emacs now reads and prints NaN significands; e.g., if X is a
NaN, '(format "%s" X)' now returns "0.0e+NaN", "1.0e+NaN", etc.,
depending on X's significand.

+++
** The function 'make-string' accepts an additional optional argument.
If the optional third argument is non-nil, 'make-string' will produce
a multibyte string even if its second argument is an ASCII character.

---
** '(format "%d" X)' no longer mishandles a floating-point number X that
does not fit in a machine integer.

---
** New coding-system 'ibm038'.
This is the International EBCDIC encoding, also available as aliases
'ebcdic-int' and 'cp038'.

---
** New JSON parsing and serialization functions 'json-serialize',
'json-insert', 'json-parse-string', and 'json-parse-buffer'.  These
are implemented in C using the Jansson library.

+++
** New function 'ring-resize'.
'ring-resize' can be used to grow or shrink a ring.

+++
** New function 'flatten-tree'.
'flatten-list' is provided as an alias.  These functions take a tree
and 'flatten' it such that the result is a list of all the terminal
nodes.

+++
** 'zlib-decompress-region' can partially decompress corrupted data.
If the new optional ALLOW-PARTIAL argument is passed, then the data
that was decompressed successfully before failing will be inserted
into the buffer.

** Image mode

---
*** New library Exif.
An Exif library has been added that can parse JPEG files and output
data about creation times and orientation and the like.
'exif-parse-file' and 'exif-parse-buffer' are the main interface
functions.

---
*** 'image-mode' now uses this library to automatically rotate images
according to the orientation in the Exif data, if any.

---
*** New library image-converter.
If you need to view exotic image formats for which Emacs doesn't have
native support, customize the new user option
'image-use-external-converter' to t.  If your system has
GraphicsMagick, ImageMagick or 'ffmpeg' installed, they will then be
used to convert images automatically before displaying them.

---
*** 'auto-mode-alist' now includes many of the types typically
supported by the external image converters, like WEPB, BMP and ICO.
These now default to using 'image-mode'.

---
*** 'imagemagick-types-inhibit' disables using ImageMagick by default.
'image-mode' started using ImageMagick by default for all images
some years back.  It now respects 'imagemagick-types-inhibit' as a way
to disable that.

---
*** Some 'image-mode' variables are now buffer-local.
The image parameters 'image-transform-rotation',
'image-transform-scale' and 'image-transform-resize' are now declared
buffer-local, so each buffer could have its own values for these
parameters.

+++
*** Three new 'image-mode' commands have been added: 'm', which marks
the file in the dired buffer(s) for the directory the file is in; 'u',
which unmarks the file; and 'w', which pushes the current buffer's file
name to the kill ring.

+++
*** The command 'image-rotate' now accepts a prefix argument.
With a prefix argument, 'image-rotate' now rotates the image at point
90 degrees counter-clockwise, instead of the default clockwise.

** Modules

---
*** The function 'load' now behaves correctly when loading modules.
Specifically, it puts the module name into 'load-history', prints
loading messages if requested, and protects against recursive loads.

+++
*** New module environment function 'process_input' to process user
input while module code is running.

+++
*** New module environment functions 'make_time' and 'extract_time' to
convert between timespec structures and Emacs Lisp time values.

+++
*** New module environment functions 'make_big_integer' and
'extract_big_integer' to create and extract arbitrary-size integer
values.

+++
*** emacs-module.h now defines a macro 'EMACS_MAJOR_VERSION' that expands
to the major version of the latest Emacs supported by the header.

+++
** The function 'read-variable' now uses its own history list.
The history of variable names read by 'read-variable' is recorded in
the new variable 'custom-variable-history'.

---
** The functions 'string-to-unibyte' and 'string-to-multibyte' are no
longer declared obsolete.  We have found that there are legitimate use
cases for these functions, where there's no better alternative.  We
believe that the incorrect uses of these functions all but disappeared
by now, so we are un-obsoleting them.

+++
** New function 'group-name' returns a group name corresponding to GID.

+++
** 'make-process' now takes a keyword argument ':file-handler'; if
that is non-nil, it will look for a file name handler for the current
buffer's 'default-directory' and invoke that file name handler to make
the process.  That way 'make-process' can start remote processes.

+++
** '(locale-info 'paper)' now returns the paper size on systems that support it.
This is currently supported on GNUish hosts and on modern versions of
MS-Windows.

+++
** The function 'regexp-opt' accepts an additional optional argument.
By default, the regexp returned by 'regexp-opt' may match the strings
in any order.  If the new third argument is non-nil, the match is
guaranteed to be performed in the order given, as if the strings were
made into a regexp by joining them with '\|'.

+++
** The function 'regexp-opt', when given an empty list of strings, now
returns a regexp that never matches anything, which is an identity for
this operation.  Previously, the empty string was returned in this
case.

+++
** New constant 'regexp-unmatchable' contains a never-matching regexp.
It is a convenient and readable way to specify a regexp that should
not match anything, and is as fast as any such regexp can be.

+++
** New functions to handle the URL variant of base-64 encoding.
New functions 'base64url-encode-string' and 'base64url-encode-region'
implement the url-variant of base-64 encoding as defined in RFC4648.

The functions 'base64-decode-string' and 'base64-decode-region' now
accept an optional argument to decode the URL variant of base-64
encoding.

+++
** The function 'file-size-human-readable' accepts more optional arguments.
The new third argument is a string put between the number and unit; it
defaults to the empty string.  The new fourth argument is a string
representing the unit to use; it defaults to "B" when the second
argument is 'iec' and the empty string otherwise.  We recommend a
space or non-breaking space as third argument, and "B" as fourth
argument, circumstances allowing.

+++
** 'format-spec' has been expanded with several modifiers to allow
greater flexibility when customizing variables.  The modifiers include
zero-padding, upper- and lower-casing, and limiting the length of the
interpolated strings.  The function has now also been documented in
the Emacs Lisp manual.

+++
** 'directory-files-recursively' can now take an optional PREDICATE
parameter to control descending into subdirectories, and a
FOLLOW-SYMLINK parameter to say that symbolic links that point to
other directories should be followed.

+++
** New function 'xor' returns the boolean exclusive-or of its args.
The function was previously defined in array.el, but has been moved to
subr.el so that it is available by default.  It now always returns the
non-nil argument when the other is nil.  Several duplicates of 'xor'
in other packages are now obsolete aliases of 'xor'.

+++
** 'define-globalized-minor-mode' now takes BODY forms.

+++
** New text property 'help-echo-inhibit-substitution'.
Setting this on the first character of a help string disables
conversions via 'substitute-command-keys'.

+++
** 'undo' can be made to ignore the active region for a command
by setting 'undo-inhibit-region' symbol property of that command to
non-nil.  This is used by 'mouse-drag-region' to make the effect
easier to undo immediately afterwards.

---
** When called interactively, 'next-buffer' and 'previous-buffer' now
signal 'user-error' if there is no buffer to switch to.


* Changes in Emacs 27.1 on Non-Free Operating Systems

---
** Battery status is now supported in all Cygwin builds.
Previously it was supported only in the Cygwin-w32 build.

** Emacs now handles key combinations involving the macOS "command"
and "option" modifier keys more correctly.

** MacOS modifier key behavior is now more adjustable.
The behavior of the macOS "Option", "Command", "Control" and
"Function" keys can now be specified separately for use with
ordinary keys, function keys and mouse clicks.  This allows using them
in their standard macOS way for composing characters.

** The special handling of 'frame-title-format' on NS where setting it
to t would enable the macOS proxy icon has been replaced with a
separate variable, 'ns-use-proxy-icon'.  'frame-title-format' will now
work as on other platforms.

---
** New primitive 'w32-read-registry'.
This primitive lets Lisp programs access the MS-Windows Registry by
retrieving values stored under a given key.  It is intended to be used
for supporting features such as XDG-like location of important files
and directories.

+++
** The default value of 'w32-pipe-read-delay' is now zero.
This speeds up reading output from sub-processes that produce a lot of
data.

This variable may need to be non-zero only when running DOS programs
as Emacs subprocesses, which by now is not supported on modern
versions of MS-Windows.  Set this variable to 50 if for some reason
you need the old behavior (and please report such situations to Emacs
developers).

---
** New variable 'w32-multibyte-code-page'.
This variable holds the value of the multibyte code page used by the
system.  It is usually zero, which indicates that 'w32-ansi-code-page'
is being used, except in Far Eastern locales.  When this variable is
non-zero, Emacs at startup sets 'locale-coding-system' to the
corresponding encoding, instead of using 'w32-ansi-code-page'.

---
** The default value of 'inhibit-compacting-font-caches' is t on MS-Windows.
Experience shows that compacting font caches causes more trouble on
MS-Windows than it helps.

+++
** Font lookup on MS-Windows was improved to support rare scripts.
To activate the improvement, run the new function
'w32-find-non-USB-fonts' once per Emacs session, or assign to the new
variable 'w32-non-USB-fonts' the list of scripts and the corresponding
fonts.  See the documentation of this function and variable in the
Emacs manual for more details.

+++
** On NS the behavior of drag and drop can now be modified by use of
modifier keys in line with Apples guidelines.  This makes the drag and
drop behavior more consistent, as previously the sending application
was able to 'set' modifiers without the knowledge of the user.

** On NS multicolor font display is enabled again since it is also
implemented in Emacs on free operating systems via Cairo drawing.


----------------------------------------------------------------------
This file is part of GNU Emacs.

GNU Emacs is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GNU Emacs.  If not, see <https://www.gnu.org/licenses/>.


Local variables:
coding: utf-8
mode: outline
paragraph-separate: "[ 	]*$"
end: