* bug#12743: 24.2.50; run-python hangs
@ 2012-10-27 15:47 Left Right
2012-10-27 15:57 ` Left Right
2012-10-27 16:49 ` Eli Zaretskii
0 siblings, 2 replies; 8+ messages in thread
From: Left Right @ 2012-10-27 15:47 UTC (permalink / raw)
To: 12743
This bug report will be sent to the Bug-GNU-Emacs mailing list
and the GNU bug tracker at debbugs.gnu.org. Please check that
the From: line contains a valid email address. After a delay of up
to one day, you should receive an acknowledgment at that address.
Please write in English if possible, as the Emacs maintainers
usually do not have translators for other languages.
Please describe exactly what actions triggered the bug, and
the precise symptoms of the bug. If you can, give a recipe
starting from `emacs -Q':
Immediately after starting Emacs with `emacs -Q` I ran
M-x run-python
This enters an infinite loop. I can interrupt the infinite loop with
C-g. After loop was interrupted, I looked into *Messages* buffer.
This is its contents:
Sent python-shell-completion-setup-code
Sent python-ffap-setup-code
Sent python-eldoc-setup-code
Error during redisplay: (jit-lock-function 1) signaled (quit)
After the fucntion was interrupted, the *Python* buffer appeared.
The modeline in the buffer spells: (Inferior Python:run
Shell-Compile)
I'm not sure if that is how it should be. I experience similar issues
with JavaScript-2 mode when using commint buffer to M-x run-js
Some times Emacs would lock up and after interruping it with C-g it
would print a message connected to a problem with displaying a face.
Sorry, I can't provide more info at the moment, but if that is
related, will find a way to do it.
Best.
Oleg
If Emacs crashed, and you have the Emacs process in the gdb debugger,
please include the output from the following gdb commands:
`bt full' and `xbacktrace'.
For information about debugging Emacs, please read the file
/usr/local/share/emacs/24.2.50/etc/DEBUG.
In GNU Emacs 24.2.50.1 (x86_64-unknown-linux-gnu, GTK+ Version 2.24.11)
of 2012-10-14 on wvxvw-desktop
Bzr revision: 110539 rgm@gnu.org-20121014001707-nd6ld4b0oxhsyl2c
Windowing system distributor `Fedora Project', version 11.0.11203000
System Description: Fedora release 17 (Beefy Miracle)
Important settings:
value of $LANG: en_US.UTF-8
locale-coding-system: utf-8-unix
default enable-multibyte-characters: t
Major mode: Fundamental
Minor modes in effect:
tooltip-mode: t
mouse-wheel-mode: t
tool-bar-mode: t
menu-bar-mode: t
file-name-shadow-mode: t
global-font-lock-mode: t
font-lock-mode: t
blink-cursor-mode: t
auto-composition-mode: t
auto-encryption-mode: t
auto-compression-mode: t
line-number-mode: t
transient-mark-mode: t
Recent input:
M-x r u n - p y t h <tab> <return> C-x o C-x b <return>
M-x r e p o r t - b <tab> <return>
Recent messages:
For information about GNU Emacs and the GNU system, type C-h C-a.
Sent python-shell-completion-setup-code
Sent python-ffap-setup-code
Sent python-eldoc-setup-code
Error during redisplay: (jit-lock-function 1) signaled (quit)
Load-path shadows:
None found.
Features:
(shadow sort gnus-util mail-extr emacsbug message format-spec rfc822 mml
mml-sec mm-decode mm-bodies mm-encode mail-parse rfc2231 mailabbrev
gmm-utils mailheader sendmail rfc2047 rfc2045 ietf-drums mm-util
mail-prsvr mail-utils compile python rx easymenu comint ring ansi-color
time-date tooltip ediff-hook vc-hooks lisp-float-type mwheel x-win x-dnd
tool-bar dnd fontset image regexp-opt fringe tabulated-list newcomment
lisp-mode register page menu-bar rfn-eshadow timer select scroll-bar
mouse jit-lock font-lock syntax facemenu font-core frame cham georgian
utf-8-lang misc-lang vietnamese tibetan thai tai-viet lao korean
japanese hebrew greek romanian slovak czech european ethiopic indian
cyrillic chinese case-table epa-hook jka-cmpr-hook help simple abbrev
minibuffer loaddefs button faces cus-face macroexp files text-properties
overlay sha1 md5 base64 format env code-pages mule custom widget
hashtable-print-readable backquote make-network-process dbusbind
dynamic-setting system-font-setting font-render-setting move-toolbar gtk
x-toolkit x multi-tty emacs)
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#12743: 24.2.50; run-python hangs
2012-10-27 15:47 bug#12743: 24.2.50; run-python hangs Left Right
@ 2012-10-27 15:57 ` Left Right
2012-10-27 16:04 ` Andreas Schwab
2012-10-27 16:49 ` Eli Zaretskii
1 sibling, 1 reply; 8+ messages in thread
From: Left Right @ 2012-10-27 15:57 UTC (permalink / raw)
To: 12743
Hello again,
I think I know what the problem is, but I don't know how to fix it:
(defun jit-lock-function (start)
"Fontify current buffer starting at position START.
This function is added to `fontification-functions' when `jit-lock-mode'
is active."
(when (and jit-lock-mode (not memory-full))
(if (null jit-lock-defer-timer)
;; No deferral.
(jit-lock-fontify-now start (+ start jit-lock-chunk-size))
;; Record the buffer for later fontification.
(unless (memq (current-buffer) jit-lock-defer-buffers)
(push (current-buffer) jit-lock-defer-buffers))
;; Mark the area as defer-fontified so that the redisplay engine
;; is happy and so that the idle timer can find the places to fontify.
(with-buffer-prepared-for-jit-lock
(put-text-property start
(next-single-property-change
start 'fontified nil
(min (point-max) (+ start jit-lock-chunk-size)))
'fontified 'defer)))))
There are 3 s-expressions inside (if ...), the third will never run,
but it probably has to. Maybe it should be (when ...) instead of (if
...)?
Best.
Oleg
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#12743: 24.2.50; run-python hangs
2012-10-27 15:57 ` Left Right
@ 2012-10-27 16:04 ` Andreas Schwab
2012-10-27 16:10 ` Left Right
0 siblings, 1 reply; 8+ messages in thread
From: Andreas Schwab @ 2012-10-27 16:04 UTC (permalink / raw)
To: Left Right; +Cc: 12743
Left Right <olegsivokon@gmail.com> writes:
> There are 3 s-expressions inside (if ...), the third will never run,
> but it probably has to. Maybe it should be (when ...) instead of (if
> ...)?
(if COND THEN ELSE...)
If COND yields non-nil, do THEN, else do ELSE...
Returns the value of THEN or the value of the last of the ELSE's.
THEN must be one expression, but ELSE... can be zero or more expressions.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Andreas.
--
Andreas Schwab, schwab@linux-m68k.org
GPG Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5
"And now for something completely different."
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#12743: 24.2.50; run-python hangs
2012-10-27 16:04 ` Andreas Schwab
@ 2012-10-27 16:10 ` Left Right
2012-10-27 16:17 ` Left Right
0 siblings, 1 reply; 8+ messages in thread
From: Left Right @ 2012-10-27 16:10 UTC (permalink / raw)
To: Andreas Schwab; +Cc: 12743
OK, I admit, I wasn't clear, I didn't count the first one, so 4
s-expressions, not 3.
Best.
Oleg
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#12743: 24.2.50; run-python hangs
2012-10-27 16:10 ` Left Right
@ 2012-10-27 16:17 ` Left Right
2012-10-27 16:31 ` Left Right
0 siblings, 1 reply; 8+ messages in thread
From: Left Right @ 2012-10-27 16:17 UTC (permalink / raw)
To: Andreas Schwab; +Cc: 12743
Ohhh... I think I know what's the reason:
with-buffer-prepared-for-jit-lock'
<-------------------------------------- note the quote! the name of
the macro doesn't have the quote in it, so instead of expanding the
macro, it thinks it is an undefined function. Doesn't it?
Best.
Oleg
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#12743: 24.2.50; run-python hangs
2012-10-27 16:17 ` Left Right
@ 2012-10-27 16:31 ` Left Right
0 siblings, 0 replies; 8+ messages in thread
From: Left Right @ 2012-10-27 16:31 UTC (permalink / raw)
To: Andreas Schwab; +Cc: 12743
Sorry for the noise. That was some artefact left after me trying to debug.
Best.
Oleg
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#12743: 24.2.50; run-python hangs
2012-10-27 15:47 bug#12743: 24.2.50; run-python hangs Left Right
2012-10-27 15:57 ` Left Right
@ 2012-10-27 16:49 ` Eli Zaretskii
2012-10-27 17:06 ` Left Right
1 sibling, 1 reply; 8+ messages in thread
From: Eli Zaretskii @ 2012-10-27 16:49 UTC (permalink / raw)
To: Left Right; +Cc: 12743
> Date: Sat, 27 Oct 2012 17:47:17 +0200
> From: Left Right <olegsivokon@gmail.com>
>
> Immediately after starting Emacs with `emacs -Q` I ran
> M-x run-python
> This enters an infinite loop. I can interrupt the infinite loop with
> C-g. After loop was interrupted, I looked into *Messages* buffer.
> This is its contents:
>
> Sent python-shell-completion-setup-code
> Sent python-ffap-setup-code
> Sent python-eldoc-setup-code
> Error during redisplay: (jit-lock-function 1) signaled (quit)
This is a duplicate of bug #12645.
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#12743: 24.2.50; run-python hangs
2012-10-27 16:49 ` Eli Zaretskii
@ 2012-10-27 17:06 ` Left Right
0 siblings, 0 replies; 8+ messages in thread
From: Left Right @ 2012-10-27 17:06 UTC (permalink / raw)
To: Eli Zaretskii; +Cc: 12743
Oops, sorry, had to search it before.
Best.
Oleg
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2012-10-27 17:06 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-10-27 15:47 bug#12743: 24.2.50; run-python hangs Left Right
2012-10-27 15:57 ` Left Right
2012-10-27 16:04 ` Andreas Schwab
2012-10-27 16:10 ` Left Right
2012-10-27 16:17 ` Left Right
2012-10-27 16:31 ` Left Right
2012-10-27 16:49 ` Eli Zaretskii
2012-10-27 17:06 ` Left Right
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).