* bug#16772: Failure in "make install" on MS-Windows
[not found] <CAH8Pv0gUZKzBjPePfpoRhYLwABObwyM_trfdTS-zRvTM0nw9MQ@mail.gmail.com>
@ 2014-02-16 21:40 ` Juanma Barranquero
2014-02-17 2:20 ` Glenn Morris
2014-02-17 11:42 ` Dani Moncayo
0 siblings, 2 replies; 34+ messages in thread
From: Juanma Barranquero @ 2014-02-16 21:40 UTC (permalink / raw)
To: Dani Moncayo; +Cc: 16772
Package: emacs
Version: 24.3.50
On Sun, Feb 16, 2014 at 10:23 PM, Dani Moncayo <dmoncayo@gmail.com> wrote:
> Hi,
>
> I've just tried to make a full bootstrap + "make install", on
> MS-Windows and from the current trunk (last time I tried was 13 days
> ago), and "make install" fails like this:
Why didn't you file a bug report for it?
> Installing utilities for users to run.
> umask 022; /bin/mkdir -p
> "/usr/home/dani/emacs/install/emacs-r116453-20140216-w32-bin/bin"
> for file in runemacs.exe addpm.exe ; do \
> /bin/install -c ${file}
> "/usr/home/dani/emacs/install/emacs-r116453-20140216-w32-bin/bin"/`echo
> ${file} | sed -e 's/.exe$//' -e 's,x,x,'`.exe ; \
> done
> /bin/install -c -m 644 README.W32
> "/usr/home/dani/emacs/install/emacs-r116453-20140216-w32-bin/share/emacs/24.3.50"
> /bin/install: cannot stat `README.W32': No such file or directory
> Makefile:168: recipe for target `install' failed
> make[1]: *** [install] Error 1
> make[1]: Leaving directory `/usr/home/dani/emacs/build/nt'
> Makefile:509: recipe for target `install-nt' failed
> make: *** [install-nt] Error 2
>
>
> Commit 116425 is related to "README.W32", so the problem might come from there.
I'm pretty sure that's the problem, yes.
Which directory is current when the "/bin/install ... README.32"
command is executed?
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-16 21:40 ` bug#16772: Failure in "make install" on MS-Windows Juanma Barranquero
@ 2014-02-17 2:20 ` Glenn Morris
2014-02-17 2:41 ` Juanma Barranquero
2014-02-17 4:54 ` Eli Zaretskii
2014-02-17 11:42 ` Dani Moncayo
1 sibling, 2 replies; 34+ messages in thread
From: Glenn Morris @ 2014-02-17 2:20 UTC (permalink / raw)
To: Juanma Barranquero; +Cc: 16772
Juanma Barranquero wrote:
> Which directory is current when the "/bin/install ... README.32"
> command is executed?
I guess he's doing an out-of-tree build.
Prob you want
$(INSTALL_DATA) $(srcdir)/README.W32 ...
But why is this file being installed anyway?
Eg a POSIX build does not install the top-level README anywhere.
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 2:20 ` Glenn Morris
@ 2014-02-17 2:41 ` Juanma Barranquero
2014-02-17 11:42 ` Dani Moncayo
2014-02-17 4:54 ` Eli Zaretskii
1 sibling, 1 reply; 34+ messages in thread
From: Juanma Barranquero @ 2014-02-17 2:41 UTC (permalink / raw)
To: Glenn Morris; +Cc: 16772
On Mon, Feb 17, 2014 at 3:20 AM, Glenn Morris <rgm@gnu.org> wrote:
> I guess he's doing an out-of-tree build.
> Prob you want
>
> $(INSTALL_DATA) $(srcdir)/README.W32 ...
Aha, I think you're right. Thanks!
Dani, could you please try this patch?
=== modified file 'nt/Makefile.in'
--- nt/Makefile.in 2014-02-13 03:19:57 +0000
+++ nt/Makefile.in 2014-02-17 02:37:26 +0000
@@ -172,5 +172,5 @@
$(INSTALL_PROGRAM) $(INSTALL_STRIP) $${file}
"$(DESTDIR)${bindir}"/`echo $${file} | sed -e 's/${EXEEXT}$$//' -e
'$(TRANSFORM)'`${EXEEXT} ; \
done
- $(INSTALL_DATA) README.W32 "$(DESTDIR)${datadir}/emacs/$(version)"
+ $(INSTALL_DATA) $(srcdir)/README.W32 "$(DESTDIR)${datadir}/emacs/$(version)"
uninstall:
> But why is this file being installed anyway?
> Eg a POSIX build does not install the top-level README anywhere.
Drew asked for it, and Eli suggested the share/emacs/VERSION location.
IMO including it is a good idea, because nt/README.W32 is not related
to building Emacs on Windows, but installing it (where to find image,
GnuTLS and libxml2 libraries, running Emacs on Windows 9X, describing
the different programs) and uninstalling it.
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 2:20 ` Glenn Morris
2014-02-17 2:41 ` Juanma Barranquero
@ 2014-02-17 4:54 ` Eli Zaretskii
1 sibling, 0 replies; 34+ messages in thread
From: Eli Zaretskii @ 2014-02-17 4:54 UTC (permalink / raw)
To: Glenn Morris; +Cc: 16772, lekktu
> From: Glenn Morris <rgm@gnu.org>
> Date: Sun, 16 Feb 2014 21:20:16 -0500
> Cc: 16772@debbugs.gnu.org
>
> But why is this file being installed anyway?
Because Windows users need instructions on how to set up their Emacs,
when they have just unpacked precompiled binaries.
This file was always in the Windows binary distro, but it was always
copied by hand. Since the binary zip is made from the installation
tree, the file needs to be there, or else it will be forgotten (as it
have been already).
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-16 21:40 ` bug#16772: Failure in "make install" on MS-Windows Juanma Barranquero
2014-02-17 2:20 ` Glenn Morris
@ 2014-02-17 11:42 ` Dani Moncayo
2014-02-17 12:32 ` Juanma Barranquero
1 sibling, 1 reply; 34+ messages in thread
From: Dani Moncayo @ 2014-02-17 11:42 UTC (permalink / raw)
To: Juanma Barranquero; +Cc: 16772
>> I've just tried to make a full bootstrap + "make install", on
>> MS-Windows and from the current trunk (last time I tried was 13 days
>> ago), and "make install" fails like this:
>
> Why didn't you file a bug report for it?
ISTR some maintainer (Glenn?) saying that people should not file bug
reports about obvious build failures, because they are likely to be
noticed and fixed soon.
>> Commit 116425 is related to "README.W32", so the problem might come from there.
>
> I'm pretty sure that's the problem, yes.
>
> Which directory is current when the "/bin/install ... README.32"
> command is executed?
At that moment, the current directory is that of the current makefile.
In this case is "/usr/home/dani/emacs/build/nt".
--
Dani Moncayo
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 2:41 ` Juanma Barranquero
@ 2014-02-17 11:42 ` Dani Moncayo
2014-02-17 12:38 ` Juanma Barranquero
` (3 more replies)
0 siblings, 4 replies; 34+ messages in thread
From: Dani Moncayo @ 2014-02-17 11:42 UTC (permalink / raw)
To: Juanma Barranquero; +Cc: 16772
> Dani, could you please try this patch?
>
> === modified file 'nt/Makefile.in'
> --- nt/Makefile.in 2014-02-13 03:19:57 +0000
> +++ nt/Makefile.in 2014-02-17 02:37:26 +0000
> @@ -172,5 +172,5 @@
> $(INSTALL_PROGRAM) $(INSTALL_STRIP) $${file}
> "$(DESTDIR)${bindir}"/`echo $${file} | sed -e 's/${EXEEXT}$$//' -e
> '$(TRANSFORM)'`${EXEEXT} ; \
> done
> - $(INSTALL_DATA) README.W32 "$(DESTDIR)${datadir}/emacs/$(version)"
> + $(INSTALL_DATA) $(srcdir)/README.W32 "$(DESTDIR)${datadir}/emacs/$(version)"
>
> uninstall:
I've tried the patch: I've gone to the build directory and done "make
install prefix='../myinstalldir' GZIP_INFO= GZIP_PROG=". The process
has ended up this way:
Installing utilities for users to run.
umask 022; /bin/mkdir -p "../myinstalldir/bin"
for file in runemacs.exe addpm.exe ; do \
/bin/install -c ${file} "../myinstalldir/bin"/`echo ${file} | sed
-e 's/.exe$//' -e 's,x,x,'`.exe ; \
done
/bin/install -c -m 644 /C/msys/home/dani/emacs/repo/nt/README.W32
"../myinstalldir/share/emacs/24.3.50"
/bin/install: cannot create regular file
`../myinstalldir/share/emacs/24.3.50': No such file or directory
Makefile:168: recipe for target `install' failed
make[1]: *** [install] Error 1
make[1]: Leaving directory `/usr/home/dani/emacs/build/nt'
Makefile:509: recipe for target `install-nt' failed
make: *** [install-nt] Error 2
The problem, I think, is that $(DESTDIR) contains literally the prefix
I gave ("../myinstalldir"), which is a relative path (to the "current"
directory - at the moment of the "make install"), but since we are now
in "nt/Makefile", the current working directory is "<build-dir>/nt",
and therefore, relative references like this one don't refer to the
intended location.
If I specify an absolute path as prefix in "make install", the the
process seems to complete successfully.
--
Dani Moncayo
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 11:42 ` Dani Moncayo
@ 2014-02-17 12:32 ` Juanma Barranquero
0 siblings, 0 replies; 34+ messages in thread
From: Juanma Barranquero @ 2014-02-17 12:32 UTC (permalink / raw)
To: Dani Moncayo; +Cc: 16772
On Mon, Feb 17, 2014 at 12:42 PM, Dani Moncayo <dmoncayo@gmail.com> wrote:
> ISTR some maintainer (Glenn?) saying that people should not file bug
> reports about obvious build failures, because they are likely to be
> noticed and fixed soon.
That would be an argument for not reporting them anywhere, not the bug
tracker, not emacs-devel.
But anyway, not many people builds on Windows, so build failures can
go unnoticed. I certainly built & installed (and bootstrapped &
installed) before commiting the change, but my builds are all in-place
and I missed this bug. So, yes, for Windows building failures I'd
recommend filing bug reports.
J
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 11:42 ` Dani Moncayo
@ 2014-02-17 12:38 ` Juanma Barranquero
2014-02-17 14:49 ` Eli Zaretskii
2014-02-17 14:48 ` Eli Zaretskii
` (2 subsequent siblings)
3 siblings, 1 reply; 34+ messages in thread
From: Juanma Barranquero @ 2014-02-17 12:38 UTC (permalink / raw)
To: Dani Moncayo; +Cc: 16772
On Mon, Feb 17, 2014 at 12:42 PM, Dani Moncayo <dmoncayo@gmail.com> wrote:
> The problem, I think, is that $(DESTDIR) contains literally the prefix
> I gave ("../myinstalldir"), which is a relative path (to the "current"
> directory - at the moment of the "make install"), but since we are now
> in "nt/Makefile", the current working directory is "<build-dir>/nt",
> and therefore, relative references like this one don't refer to the
> intended location.
Why would then work the other commands in the install target?
umask 022; ${MKDIR_P} "$(DESTDIR)${bindir}"
for file in ${INSTALLABLES} ; do \
$(INSTALL_PROGRAM) $(INSTALL_STRIP) $${file}
"$(DESTDIR)${bindir}"/`echo $${file} | sed -e 's/${EXEEXT}$$//' -e
'$(TRANSFORM)'`${EXEEXT} ; \
done
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 11:42 ` Dani Moncayo
2014-02-17 12:38 ` Juanma Barranquero
@ 2014-02-17 14:48 ` Eli Zaretskii
2014-02-17 15:06 ` Dani Moncayo
2014-02-17 18:00 ` Glenn Morris
3 siblings, 0 replies; 34+ messages in thread
From: Eli Zaretskii @ 2014-02-17 14:48 UTC (permalink / raw)
To: Dani Moncayo; +Cc: 16772, lekktu
> Date: Mon, 17 Feb 2014 12:42:52 +0100
> From: Dani Moncayo <dmoncayo@gmail.com>
> Cc: 16772@debbugs.gnu.org
>
> /bin/install -c -m 644 /C/msys/home/dani/emacs/repo/nt/README.W32
> "../myinstalldir/share/emacs/24.3.50"
> /bin/install: cannot create regular file
> `../myinstalldir/share/emacs/24.3.50': No such file or directory
> Makefile:168: recipe for target `install' failed
> make[1]: *** [install] Error 1
> make[1]: Leaving directory `/usr/home/dani/emacs/build/nt'
> Makefile:509: recipe for target `install-nt' failed
> make: *** [install-nt] Error 2
>
> The problem, I think, is that $(DESTDIR) contains literally the prefix
> I gave ("../myinstalldir"), which is a relative path (to the "current"
> directory - at the moment of the "make install"), but since we are now
> in "nt/Makefile", the current working directory is "<build-dir>/nt",
> and therefore, relative references like this one don't refer to the
> intended location.
>
> If I specify an absolute path as prefix in "make install", the the
> process seems to complete successfully.
Don't specify relative file names in DESTDIR, that's not supported.
From the GNU Coding Standards:
7.2.4 `DESTDIR': Support for Staged Installs
--------------------------------------------
`DESTDIR' is a variable prepended to each installed target file, like
this:
$(INSTALL_PROGRAM) foo $(DESTDIR)$(bindir)/foo
$(INSTALL_DATA) libfoo.a $(DESTDIR)$(libdir)/libfoo.a
The `DESTDIR' variable is specified by the user on the `make'
command line as an absolute file name. For example:
^^^^^^^^^^^^^^^^^^^^^^^^
make DESTDIR=/tmp/stage install
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 12:38 ` Juanma Barranquero
@ 2014-02-17 14:49 ` Eli Zaretskii
2014-02-17 14:54 ` Juanma Barranquero
0 siblings, 1 reply; 34+ messages in thread
From: Eli Zaretskii @ 2014-02-17 14:49 UTC (permalink / raw)
To: Juanma Barranquero; +Cc: 16772
> From: Juanma Barranquero <lekktu@gmail.com>
> Date: Mon, 17 Feb 2014 13:38:40 +0100
> Cc: 16772@debbugs.gnu.org
>
> On Mon, Feb 17, 2014 at 12:42 PM, Dani Moncayo <dmoncayo@gmail.com> wrote:
>
> > The problem, I think, is that $(DESTDIR) contains literally the prefix
> > I gave ("../myinstalldir"), which is a relative path (to the "current"
> > directory - at the moment of the "make install"), but since we are now
> > in "nt/Makefile", the current working directory is "<build-dir>/nt",
> > and therefore, relative references like this one don't refer to the
> > intended location.
>
> Why would then work the other commands in the install target?
Presumably because those directories somehow did exist beforehand.
Anyway, DESTDIR must be an absolute file name, see my other mail.
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 14:49 ` Eli Zaretskii
@ 2014-02-17 14:54 ` Juanma Barranquero
2014-02-17 15:06 ` Dani Moncayo
0 siblings, 1 reply; 34+ messages in thread
From: Juanma Barranquero @ 2014-02-17 14:54 UTC (permalink / raw)
To: Eli Zaretskii; +Cc: 16772-done
On Mon, Feb 17, 2014 at 3:49 PM, Eli Zaretskii <eliz@gnu.org> wrote:
> Anyway, DESTDIR must be an absolute file name, see my other mail.
Closing this bug, then. Thanks.
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 14:54 ` Juanma Barranquero
@ 2014-02-17 15:06 ` Dani Moncayo
0 siblings, 0 replies; 34+ messages in thread
From: Dani Moncayo @ 2014-02-17 15:06 UTC (permalink / raw)
To: Juanma Barranquero; +Cc: 16772-done
>> Anyway, DESTDIR must be an absolute file name, see my other mail.
Silly limitation, I think. But fair enough.
> Closing this bug, then. Thanks.
Ok, but at least your patch for "nt/Makefile.in" is required for
out-of-tree, MS-Windows builds to work.
--
Dani Moncayo
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 11:42 ` Dani Moncayo
2014-02-17 12:38 ` Juanma Barranquero
2014-02-17 14:48 ` Eli Zaretskii
@ 2014-02-17 15:06 ` Dani Moncayo
2014-02-17 15:18 ` Juanma Barranquero
2014-02-17 15:31 ` Eli Zaretskii
2014-02-17 18:00 ` Glenn Morris
3 siblings, 2 replies; 34+ messages in thread
From: Dani Moncayo @ 2014-02-17 15:06 UTC (permalink / raw)
To: Juanma Barranquero; +Cc: 16772
> I've tried the patch: I've gone to the build directory and done "make
> install prefix='../myinstalldir' GZIP_INFO= GZIP_PROG=". The process
> has ended up this way:
>
> Installing utilities for users to run.
> umask 022; /bin/mkdir -p "../myinstalldir/bin"
> for file in runemacs.exe addpm.exe ; do \
> /bin/install -c ${file} "../myinstalldir/bin"/`echo ${file} | sed
> -e 's/.exe$//' -e 's,x,x,'`.exe ; \
> done
> /bin/install -c -m 644 /C/msys/home/dani/emacs/repo/nt/README.W32
> "../myinstalldir/share/emacs/24.3.50"
> /bin/install: cannot create regular file
> `../myinstalldir/share/emacs/24.3.50': No such file or directory
> Makefile:168: recipe for target `install' failed
> make[1]: *** [install] Error 1
> make[1]: Leaving directory `/usr/home/dani/emacs/build/nt'
> Makefile:509: recipe for target `install-nt' failed
> make: *** [install-nt] Error 2
>
> The problem, I think, is that $(DESTDIR) contains literally the prefix
> I gave ("../myinstalldir"),
After some more tests, what seems to happen is that the "DESTDIR" make
variable is empty during the evaluation of the "install" target in
"nt/Makefile" ("${datadir}" is what produces "../myinstalldir/share").
--
Dani Moncayo
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 15:06 ` Dani Moncayo
@ 2014-02-17 15:18 ` Juanma Barranquero
2014-02-17 15:29 ` Dani Moncayo
2014-02-17 15:31 ` Eli Zaretskii
1 sibling, 1 reply; 34+ messages in thread
From: Juanma Barranquero @ 2014-02-17 15:18 UTC (permalink / raw)
To: Dani Moncayo; +Cc: 16772
reopen 16772
quit
On Mon, Feb 17, 2014 at 4:06 PM, Dani Moncayo <dmoncayo@gmail.com> wrote:
> After some more tests, what seems to happen is that the "DESTDIR" make
> variable is empty during the evaluation of the "install" target in
> "nt/Makefile" ("${datadir}" is what produces "../myinstalldir/share").
What are the values of $(bindir), $(datarootdir) and $(libexecdir)?
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 15:18 ` Juanma Barranquero
@ 2014-02-17 15:29 ` Dani Moncayo
2014-02-17 15:39 ` Juanma Barranquero
0 siblings, 1 reply; 34+ messages in thread
From: Dani Moncayo @ 2014-02-17 15:29 UTC (permalink / raw)
To: Juanma Barranquero; +Cc: 16772
> What are the values of $(bindir), $(datarootdir) and $(libexecdir)?
bindir=../myinstalldir/bin
datarootdir=../myinstalldir/share
libexecdir=../myinstalldir/libexec
--
Dani Moncayo
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 15:06 ` Dani Moncayo
2014-02-17 15:18 ` Juanma Barranquero
@ 2014-02-17 15:31 ` Eli Zaretskii
2014-02-17 15:33 ` Dani Moncayo
1 sibling, 1 reply; 34+ messages in thread
From: Eli Zaretskii @ 2014-02-17 15:31 UTC (permalink / raw)
To: Dani Moncayo; +Cc: 16772, lekktu
> Date: Mon, 17 Feb 2014 16:06:52 +0100
> From: Dani Moncayo <dmoncayo@gmail.com>
> Cc: 16772@debbugs.gnu.org
>
> > I've tried the patch: I've gone to the build directory and done "make
> > install prefix='../myinstalldir' GZIP_INFO= GZIP_PROG=". The process
> > has ended up this way:
> >
> > Installing utilities for users to run.
> > umask 022; /bin/mkdir -p "../myinstalldir/bin"
> > for file in runemacs.exe addpm.exe ; do \
> > /bin/install -c ${file} "../myinstalldir/bin"/`echo ${file} | sed
> > -e 's/.exe$//' -e 's,x,x,'`.exe ; \
> > done
> > /bin/install -c -m 644 /C/msys/home/dani/emacs/repo/nt/README.W32
> > "../myinstalldir/share/emacs/24.3.50"
> > /bin/install: cannot create regular file
> > `../myinstalldir/share/emacs/24.3.50': No such file or directory
> > Makefile:168: recipe for target `install' failed
> > make[1]: *** [install] Error 1
> > make[1]: Leaving directory `/usr/home/dani/emacs/build/nt'
> > Makefile:509: recipe for target `install-nt' failed
> > make: *** [install-nt] Error 2
> >
> > The problem, I think, is that $(DESTDIR) contains literally the prefix
> > I gave ("../myinstalldir"),
>
> After some more tests, what seems to happen is that the "DESTDIR" make
> variable is empty during the evaluation of the "install" target in
> "nt/Makefile" ("${datadir}" is what produces "../myinstalldir/share").
Sorry, I don't understand: did you specify DESTDIR, or didn't you? If
you did, please show the full "make install" command line you used.
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 15:31 ` Eli Zaretskii
@ 2014-02-17 15:33 ` Dani Moncayo
2014-02-17 15:58 ` Eli Zaretskii
0 siblings, 1 reply; 34+ messages in thread
From: Dani Moncayo @ 2014-02-17 15:33 UTC (permalink / raw)
To: Eli Zaretskii; +Cc: 16772, Juanma Barranquero
> Sorry, I don't understand: did you specify DESTDIR, or didn't you? If
> you did, please show the full "make install" command line you used.
As I said:
>> > I've tried the patch: I've gone to the build directory and done "make
>> > install prefix='../myinstalldir' GZIP_INFO= GZIP_PROG=". The process
>> > has ended up this way:
AFAIK, this is the way to specify the destination directory in "make
install" (using the "prefix" parameter).
--
Dani Moncayo
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 15:29 ` Dani Moncayo
@ 2014-02-17 15:39 ` Juanma Barranquero
2014-02-17 15:58 ` Eli Zaretskii
0 siblings, 1 reply; 34+ messages in thread
From: Juanma Barranquero @ 2014-02-17 15:39 UTC (permalink / raw)
To: Dani Moncayo; +Cc: 16772
On Mon, Feb 17, 2014 at 4:29 PM, Dani Moncayo <dmoncayo@gmail.com> wrote:
> bindir=../myinstalldir/bin
> datarootdir=../myinstalldir/share
> libexecdir=../myinstalldir/libexec
The value of $(datadir) you reported, "../myinstalldir/share" is
consistent with these values.
Perhaps it's simply that the directory hasn't been created yet. Try
=== modified file 'nt/Makefile.in'
--- nt/Makefile.in 2014-02-13 03:19:57 +0000
+++ nt/Makefile.in 2014-02-17 15:38:27 +0000
@@ -172,4 +172,5 @@
$(INSTALL_PROGRAM) $(INSTALL_STRIP) $${file}
"$(DESTDIR)${bindir}"/`echo $${file} | sed -e 's/${EXEEXT}$$//' -e
'$(TRANSFORM)'`${EXEEXT} ; \
done
+ ${MKDIR_P} "$(DESTDIR)${datadir}/emacs/$(version)"
$(INSTALL_DATA) README.W32 "$(DESTDIR)${datadir}/emacs/$(version)"
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 15:33 ` Dani Moncayo
@ 2014-02-17 15:58 ` Eli Zaretskii
2014-02-17 16:16 ` Dani Moncayo
0 siblings, 1 reply; 34+ messages in thread
From: Eli Zaretskii @ 2014-02-17 15:58 UTC (permalink / raw)
To: Dani Moncayo; +Cc: 16772, lekktu
> Date: Mon, 17 Feb 2014 16:33:53 +0100
> From: Dani Moncayo <dmoncayo@gmail.com>
> Cc: Juanma Barranquero <lekktu@gmail.com>, 16772@debbugs.gnu.org
>
> > Sorry, I don't understand: did you specify DESTDIR, or didn't you? If
> > you did, please show the full "make install" command line you used.
>
> As I said:
>
> >> > I've tried the patch: I've gone to the build directory and done "make
> >> > install prefix='../myinstalldir' GZIP_INFO= GZIP_PROG=". The process
> >> > has ended up this way:
There's no DESTDIR anywhere in sight here.
> AFAIK, this is the way to specify the destination directory in "make
> install" (using the "prefix" parameter).
You explicitly mentioned DESTDIR, not "destination directory":
> The problem, I think, is that $(DESTDIR) contains literally the prefix
> I gave ("../myinstalldir"), which is a relative path (to the "current"
> directory - at the moment of the "make install"), but since we are now
> in "nt/Makefile", the current working directory is "<build-dir>/nt",
> and therefore, relative references like this one don't refer to the
> intended location.
So I thought you were using DESTDIR on the Make command line. It now
turns out you didn't use DESTDIR at all.
You also said that the target directory existed when the error was
reported:
> On Mon, Feb 17, 2014 at 5:45 AM, Eli Zaretskii <eliz@gnu.org> wrote:
> >> Date: Sun, 16 Feb 2014 22:23:06 +0100
> >> From: Dani Moncayo <dmoncayo@gmail.com>
> >>
> >> /bin/install -c -m 644 README.W32
> >> "/usr/home/dani/emacs/install/emacs-r116453-20140216-w32-bin/share/emacs/24.3.50"
> >> /bin/install: cannot stat `README.W32': No such file or directory
> >
> > Does the target directory
> > "/usr/home/dani/emacs/install/emacs-r116453-20140216-w32-bin/share/emacs/24.3.50"
> > exist at that point?
>
> Yes, it does.
So how come now it does NOT exist?
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 15:39 ` Juanma Barranquero
@ 2014-02-17 15:58 ` Eli Zaretskii
2014-02-17 16:06 ` Juanma Barranquero
0 siblings, 1 reply; 34+ messages in thread
From: Eli Zaretskii @ 2014-02-17 15:58 UTC (permalink / raw)
To: Juanma Barranquero; +Cc: 16772
> From: Juanma Barranquero <lekktu@gmail.com>
> Date: Mon, 17 Feb 2014 16:39:07 +0100
> Cc: 16772@debbugs.gnu.org
>
> On Mon, Feb 17, 2014 at 4:29 PM, Dani Moncayo <dmoncayo@gmail.com> wrote:
>
> > bindir=../myinstalldir/bin
> > datarootdir=../myinstalldir/share
> > libexecdir=../myinstalldir/libexec
>
> The value of $(datadir) you reported, "../myinstalldir/share" is
> consistent with these values.
>
> Perhaps it's simply that the directory hasn't been created yet. Try
>
> === modified file 'nt/Makefile.in'
> --- nt/Makefile.in 2014-02-13 03:19:57 +0000
> +++ nt/Makefile.in 2014-02-17 15:38:27 +0000
> @@ -172,4 +172,5 @@
> $(INSTALL_PROGRAM) $(INSTALL_STRIP) $${file}
> "$(DESTDIR)${bindir}"/`echo $${file} | sed -e 's/${EXEEXT}$$//' -e
> '$(TRANSFORM)'`${EXEEXT} ; \
> done
> + ${MKDIR_P} "$(DESTDIR)${datadir}/emacs/$(version)"
> $(INSTALL_DATA) README.W32 "$(DESTDIR)${datadir}/emacs/$(version)"
Previously, Dani said this directory already existed when the error
was reported.
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 15:58 ` Eli Zaretskii
@ 2014-02-17 16:06 ` Juanma Barranquero
0 siblings, 0 replies; 34+ messages in thread
From: Juanma Barranquero @ 2014-02-17 16:06 UTC (permalink / raw)
To: Eli Zaretskii; +Cc: 16772
On Mon, Feb 17, 2014 at 4:58 PM, Eli Zaretskii <eliz@gnu.org> wrote:
> Previously, Dani said this directory already existed when the error
> was reported.
Well, yes, but this
> /bin/install: cannot create regular file
> `../myinstalldir/share/emacs/24.3.50': No such file or directory
seems pretty clear.
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 15:58 ` Eli Zaretskii
@ 2014-02-17 16:16 ` Dani Moncayo
2014-02-17 16:44 ` Eli Zaretskii
0 siblings, 1 reply; 34+ messages in thread
From: Dani Moncayo @ 2014-02-17 16:16 UTC (permalink / raw)
To: Eli Zaretskii; +Cc: 16772, Juanma Barranquero
>> > Sorry, I don't understand: did you specify DESTDIR, or didn't you? If
>> > you did, please show the full "make install" command line you used.
>>
>> As I said:
>>
>> >> > I've tried the patch: I've gone to the build directory and done "make
>> >> > install prefix='../myinstalldir' GZIP_INFO= GZIP_PROG=". The process
>> >> > has ended up this way:
>
> There's no DESTDIR anywhere in sight here.
There isn't, no. (and?)
>> AFAIK, this is the way to specify the destination directory in "make
>> install" (using the "prefix" parameter).
>
> You explicitly mentioned DESTDIR, not "destination directory":
Because DESTDIR is the name of a make variable, which is employed in
the sentence which failed in my original bug report (file
"nt/Makefile.in", target "install"):
$(INSTALL_DATA) README.W32 "$(DESTDIR)${datadir}/emacs/$(version)"
When I try to show the value of that variable, at that point, it seems
to be empty (which seems like a bug).
>> The problem, I think, is that $(DESTDIR) contains literally the prefix
>> I gave ("../myinstalldir"), which is a relative path (to the "current"
>> directory - at the moment of the "make install"), but since we are now
>> in "nt/Makefile", the current working directory is "<build-dir>/nt",
>> and therefore, relative references like this one don't refer to the
>> intended location.
>
> So I thought you were using DESTDIR on the Make command line. It now
> turns out you didn't use DESTDIR at all.
No, I didn't. Sorry if I said something that confused you, but AFAIK,
I don't have to set that variable anywere.
> You also said that the target directory existed when the error was
> reported:
>
>> On Mon, Feb 17, 2014 at 5:45 AM, Eli Zaretskii <eliz@gnu.org> wrote:
>> >> Date: Sun, 16 Feb 2014 22:23:06 +0100
>> >> From: Dani Moncayo <dmoncayo@gmail.com>
>> >>
>> >> /bin/install -c -m 644 README.W32
>> >> "/usr/home/dani/emacs/install/emacs-r116453-20140216-w32-bin/share/emacs/24.3.50"
>> >> /bin/install: cannot stat `README.W32': No such file or directory
>> >
>> > Does the target directory
>> > "/usr/home/dani/emacs/install/emacs-r116453-20140216-w32-bin/share/emacs/24.3.50"
>> > exist at that point?
>>
>> Yes, it does.
>
> So how come now it does NOT exist?
When I checked, I think it existed, but I'm going crazy with so many tests...
I'd suggest you to try to reproduce this yourself. But failing that,
I'll do it later today...
--
Dani Moncayo
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 16:16 ` Dani Moncayo
@ 2014-02-17 16:44 ` Eli Zaretskii
0 siblings, 0 replies; 34+ messages in thread
From: Eli Zaretskii @ 2014-02-17 16:44 UTC (permalink / raw)
To: Dani Moncayo; +Cc: 16772, lekktu
> Date: Mon, 17 Feb 2014 17:16:06 +0100
> From: Dani Moncayo <dmoncayo@gmail.com>
> Cc: Juanma Barranquero <lekktu@gmail.com>, 16772@debbugs.gnu.org
>
> >> > Sorry, I don't understand: did you specify DESTDIR, or didn't you? If
> >> > you did, please show the full "make install" command line you used.
> >>
> >> As I said:
> >>
> >> >> > I've tried the patch: I've gone to the build directory and done "make
> >> >> > install prefix='../myinstalldir' GZIP_INFO= GZIP_PROG=". The process
> >> >> > has ended up this way:
> >
> > There's no DESTDIR anywhere in sight here.
>
> There isn't, no. (and?)
And you said its value was ../myinstalldir, which cannot possibly
happen unless you set this variable directly from the command line.
> >> AFAIK, this is the way to specify the destination directory in "make
> >> install" (using the "prefix" parameter).
> >
> > You explicitly mentioned DESTDIR, not "destination directory":
>
> Because DESTDIR is the name of a make variable, which is employed in
> the sentence which failed in my original bug report (file
> "nt/Makefile.in", target "install"):
> $(INSTALL_DATA) README.W32 "$(DESTDIR)${datadir}/emacs/$(version)"
>
> When I try to show the value of that variable, at that point, it seems
> to be empty (which seems like a bug).
It's not a bug: when this variable is not set explicitly on the Make
command line, it should indeed be empty.
> >> The problem, I think, is that $(DESTDIR) contains literally the prefix
> >> I gave ("../myinstalldir"), which is a relative path (to the "current"
> >> directory - at the moment of the "make install"), but since we are now
> >> in "nt/Makefile", the current working directory is "<build-dir>/nt",
> >> and therefore, relative references like this one don't refer to the
> >> intended location.
> >
> > So I thought you were using DESTDIR on the Make command line. It now
> > turns out you didn't use DESTDIR at all.
>
> No, I didn't. Sorry if I said something that confused you, but AFAIK,
> I don't have to set that variable anywere.
If DESTDIR is not empty, it means you have set it.
> I'd suggest you to try to reproduce this yourself. But failing that,
> I'll do it later today...
Better try the patch suggested by Juanma.
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 11:42 ` Dani Moncayo
` (2 preceding siblings ...)
2014-02-17 15:06 ` Dani Moncayo
@ 2014-02-17 18:00 ` Glenn Morris
2014-02-17 18:57 ` Dani Moncayo
2014-02-17 18:58 ` Eli Zaretskii
3 siblings, 2 replies; 34+ messages in thread
From: Glenn Morris @ 2014-02-17 18:00 UTC (permalink / raw)
To: Dani Moncayo; +Cc: 16772, Juanma Barranquero
Dani Moncayo wrote:
> I've tried the patch: I've gone to the build directory and done "make
> install prefix='../myinstalldir' GZIP_INFO= GZIP_PROG=". The process
> has ended up this way:
Don't change `prefix' at install time.
You should only set prefix with configure.
And if you try, it will say:
configure: error: expected an absolute directory name for --prefix:
../myinstalldir
It's DESTDIR that you may change at install time:
https://www.gnu.org/prep/standards/html_node/DESTDIR.html
And as has been said, that should be absolute too.
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 18:00 ` Glenn Morris
@ 2014-02-17 18:57 ` Dani Moncayo
2014-02-17 19:01 ` Dani Moncayo
2014-02-17 19:06 ` Glenn Morris
2014-02-17 18:58 ` Eli Zaretskii
1 sibling, 2 replies; 34+ messages in thread
From: Dani Moncayo @ 2014-02-17 18:57 UTC (permalink / raw)
To: Glenn Morris; +Cc: 16772, Juanma Barranquero
>> I've tried the patch: I've gone to the build directory and done "make
>> install prefix='../myinstalldir' GZIP_INFO= GZIP_PROG=". The process
>> has ended up this way:
>
> Don't change `prefix' at install time.
> You should only set prefix with configure.
I'm following the procedure documented in "nt/INSTALL", which says this:
4. Install the produced binaries:
make install
If you want the installation tree to go to a place that is
different from the one specified by --prefix, say
make install prefix=/where/ever/you/want
If that procedure is wrong, please fix it. But FWIW, I've
successfully made many binary distributions in the last months
following that same procedure.
> And if you try, it will say:
>
> configure: error: expected an absolute directory name for --prefix:
> ../myinstalldir
No, it says something different: I've just tried this, from a build
directory holding a bootstrap of the trunk (r116453):
make install prefix=/c/tmp/dir2 GZIP_INFO= GZIP_PROG=
The make process, after writing many messages to the terminal, has
failed with this snippet:
Installing utilities for users to run.
umask 022; /bin/mkdir -p "/c/tmp/dir2/bin"
for file in runemacs.exe addpm.exe ; do \
/bin/install -c ${file} "/c/tmp/dir2/bin"/`echo ${file} | sed -e
's/.exe$//' -e 's,x,x,'`.exe ; \
done
/bin/install -c -m 644 README.W32 "/c/tmp/dir2/share/emacs/24.3.50"
/bin/install: cannot stat `README.W32': No such file or directory
Makefile:168: recipe for target `install' failed
make[1]: *** [install] Error 1
make[1]: Leaving directory `/usr/home/dani/emacs/build/nt'
Makefile:509: recipe for target `install-nt' failed
make: *** [install-nt] Error 2
And then I've applied the patch sent by Juanma, and tried again. This
time the installation seems to be successful, and I see the file
"<my-install-dir>/share/emacs/24.3.50/README.W32", as expected.
So please, Juanma, could you commit your patch? TIA
--
Dani Moncayo
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 18:00 ` Glenn Morris
2014-02-17 18:57 ` Dani Moncayo
@ 2014-02-17 18:58 ` Eli Zaretskii
2014-02-17 19:01 ` Glenn Morris
1 sibling, 1 reply; 34+ messages in thread
From: Eli Zaretskii @ 2014-02-17 18:58 UTC (permalink / raw)
To: Glenn Morris; +Cc: 16772, lekktu
> From: Glenn Morris <rgm@gnu.org>
> Date: Mon, 17 Feb 2014 13:00:43 -0500
> Cc: 16772@debbugs.gnu.org, Juanma Barranquero <lekktu@gmail.com>
>
> Don't change `prefix' at install time.
> You should only set prefix with configure.
IMNSHO, there's nothing wrong with
make install prefix=/foo/bar
I have yet to see a package that doesn't support that.
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 18:58 ` Eli Zaretskii
@ 2014-02-17 19:01 ` Glenn Morris
2014-02-17 19:13 ` Glenn Morris
0 siblings, 1 reply; 34+ messages in thread
From: Glenn Morris @ 2014-02-17 19:01 UTC (permalink / raw)
To: Eli Zaretskii; +Cc: 16772, lekktu
Eli Zaretskii wrote:
> make install prefix=/foo/bar
>
> I have yet to see a package that doesn't support that.
Oh, OK. Seems weird to me though.
Why did GNU invent DESTDIR then?
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 18:57 ` Dani Moncayo
@ 2014-02-17 19:01 ` Dani Moncayo
2014-02-17 19:05 ` Juanma Barranquero
2014-02-17 19:06 ` Glenn Morris
1 sibling, 1 reply; 34+ messages in thread
From: Dani Moncayo @ 2014-02-17 19:01 UTC (permalink / raw)
To: Juanma Barranquero; +Cc: 16772
> And then I've applied the patch sent by Juanma, and tried again. This
> time the installation seems to be successful, and I see the file
> "<my-install-dir>/share/emacs/24.3.50/README.W32", as expected.
>
> So please, Juanma, could you commit your patch? TIA
I mean this patch (I've just realized that you sent two):
=== modified file 'nt/Makefile.in'
--- nt/Makefile.in 2014-02-13 03:19:57 +0000
+++ nt/Makefile.in 2014-02-17 18:50:35 +0000
@@ -171,7 +171,7 @@
for file in ${INSTALLABLES} ; do \
$(INSTALL_PROGRAM) $(INSTALL_STRIP) $${file}
"$(DESTDIR)${bindir}"/`echo $${file} | sed -e 's/${EXEEXT}$$//' -
e '$(TRANSFORM)'`${EXEEXT} ; \
done
- $(INSTALL_DATA) README.W32 "$(DESTDIR)${datadir}/emacs/$(version)"
+ $(INSTALL_DATA) ${srcdir}/README.W32
"$(DESTDIR)${datadir}/emacs/$(version)"
uninstall:
rm -f "$(DESTDIR)${datadir}/emacs/$(version)/README.W32"
--
Dani Moncayo
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 19:01 ` Dani Moncayo
@ 2014-02-17 19:05 ` Juanma Barranquero
2014-02-17 19:09 ` Dani Moncayo
0 siblings, 1 reply; 34+ messages in thread
From: Juanma Barranquero @ 2014-02-17 19:05 UTC (permalink / raw)
To: Dani Moncayo; +Cc: 16772-done
On Mon, Feb 17, 2014 at 8:01 PM, Dani Moncayo <dmoncayo@gmail.com> wrote:
> I mean this patch (I've just realized that you sent two):
Ha, too late. I've commited both. I think both make sense.
Closing (again),
J
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 18:57 ` Dani Moncayo
2014-02-17 19:01 ` Dani Moncayo
@ 2014-02-17 19:06 ` Glenn Morris
2014-02-17 20:36 ` Eli Zaretskii
1 sibling, 1 reply; 34+ messages in thread
From: Glenn Morris @ 2014-02-17 19:06 UTC (permalink / raw)
To: Dani Moncayo; +Cc: 16772, Juanma Barranquero
Dani Moncayo wrote:
> If you want the installation tree to go to a place that is
> different from the one specified by --prefix, say
>
> make install prefix=/where/ever/you/want
Seems weird to me for Emacs to be recommending that.
Why would one not specify the right prefix at configure time...?
>> And if you try, it will say:
>>
>> configure: error: expected an absolute directory name for --prefix:
>> ../myinstalldir
>
> No, it says something different: I've just tried this
[...]
> make install prefix=/c/tmp/dir2 GZIP_INFO= GZIP_PROG=
We seem to be having a failure to communicate.
"I ran make install with an absolute prefix" has no relevance to
"Here's what happens if you run configure with a relative prefix"
> And then I've applied the patch sent by Juanma, and tried again. This
> time the installation seems to be successful, and I see the file
> "<my-install-dir>/share/emacs/24.3.50/README.W32", as expected.
Hooray.
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 19:05 ` Juanma Barranquero
@ 2014-02-17 19:09 ` Dani Moncayo
2014-02-17 21:21 ` Juanma Barranquero
0 siblings, 1 reply; 34+ messages in thread
From: Dani Moncayo @ 2014-02-17 19:09 UTC (permalink / raw)
To: Juanma Barranquero; +Cc: 16772-done
>> I mean this patch (I've just realized that you sent two):
>
> Ha, too late. I've commited both. I think both make sense.
>
> Closing (again),
Thank you Juanma, but I must say that the version that I've
successfully tested doesn't includes this line:
${MKDIR_P} "$(DESTDIR)${datadir}/emacs/$(version)"
which you've added to "nt/Makefile.in".
--
Dani Moncayo
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 19:01 ` Glenn Morris
@ 2014-02-17 19:13 ` Glenn Morris
0 siblings, 0 replies; 34+ messages in thread
From: Glenn Morris @ 2014-02-17 19:13 UTC (permalink / raw)
To: 16772
Glenn Morris wrote:
>> make install prefix=/foo/bar
[...]
> Oh, OK. Seems weird to me though.
> Why did GNU invent DESTDIR then?
For the record, I see my questions are answered in
http://www.gnu.org/savannah-checkouts/gnu/autoconf/manual/autoconf-2.69/html_node/Installation-Names.html
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 19:06 ` Glenn Morris
@ 2014-02-17 20:36 ` Eli Zaretskii
0 siblings, 0 replies; 34+ messages in thread
From: Eli Zaretskii @ 2014-02-17 20:36 UTC (permalink / raw)
To: Glenn Morris; +Cc: 16772, lekktu
> From: Glenn Morris <rgm@gnu.org>
> Date: Mon, 17 Feb 2014 14:06:53 -0500
> Cc: 16772@debbugs.gnu.org, Juanma Barranquero <lekktu@gmail.com>
>
> Dani Moncayo wrote:
>
> > If you want the installation tree to go to a place that is
> > different from the one specified by --prefix, say
> >
> > make install prefix=/where/ever/you/want
>
> Seems weird to me for Emacs to be recommending that.
> Why would one not specify the right prefix at configure time...?
The above doesn't change the configure-time prefix, as far as
directories recorded in the binaries are concerned. It just installs
under a different tree root.
It is convenient to do that when you are preparing a binary
distribution, because you then create a tree that includes a single
package.
The reason nt/INSTALL recommends this technique, as opposed to
DESTDIR, is because that is what I use. And the reason I prefer not
to use DESTDIR is that it fails on Windows if --prefix specified a
Windows style absolute file name, as in --prefix=d:/usr, because you
cannot prepend any non-empty string to that without producing an
invalid file name.
^ permalink raw reply [flat|nested] 34+ messages in thread
* bug#16772: Failure in "make install" on MS-Windows
2014-02-17 19:09 ` Dani Moncayo
@ 2014-02-17 21:21 ` Juanma Barranquero
0 siblings, 0 replies; 34+ messages in thread
From: Juanma Barranquero @ 2014-02-17 21:21 UTC (permalink / raw)
To: Dani Moncayo; +Cc: 16772-done
On Mon, Feb 17, 2014 at 8:09 PM, Dani Moncayo <dmoncayo@gmail.com> wrote:
> Thank you Juanma, but I must say that the version that I've
> successfully tested doesn't includes this line:
>
> ${MKDIR_P} "$(DESTDIR)${datadir}/emacs/$(version)"
>
> which you've added to "nt/Makefile.in".
No problem. Making sure that the target directory exists seems sensible anyway.
^ permalink raw reply [flat|nested] 34+ messages in thread
end of thread, other threads:[~2014-02-17 21:21 UTC | newest]
Thread overview: 34+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CAH8Pv0gUZKzBjPePfpoRhYLwABObwyM_trfdTS-zRvTM0nw9MQ@mail.gmail.com>
2014-02-16 21:40 ` bug#16772: Failure in "make install" on MS-Windows Juanma Barranquero
2014-02-17 2:20 ` Glenn Morris
2014-02-17 2:41 ` Juanma Barranquero
2014-02-17 11:42 ` Dani Moncayo
2014-02-17 12:38 ` Juanma Barranquero
2014-02-17 14:49 ` Eli Zaretskii
2014-02-17 14:54 ` Juanma Barranquero
2014-02-17 15:06 ` Dani Moncayo
2014-02-17 14:48 ` Eli Zaretskii
2014-02-17 15:06 ` Dani Moncayo
2014-02-17 15:18 ` Juanma Barranquero
2014-02-17 15:29 ` Dani Moncayo
2014-02-17 15:39 ` Juanma Barranquero
2014-02-17 15:58 ` Eli Zaretskii
2014-02-17 16:06 ` Juanma Barranquero
2014-02-17 15:31 ` Eli Zaretskii
2014-02-17 15:33 ` Dani Moncayo
2014-02-17 15:58 ` Eli Zaretskii
2014-02-17 16:16 ` Dani Moncayo
2014-02-17 16:44 ` Eli Zaretskii
2014-02-17 18:00 ` Glenn Morris
2014-02-17 18:57 ` Dani Moncayo
2014-02-17 19:01 ` Dani Moncayo
2014-02-17 19:05 ` Juanma Barranquero
2014-02-17 19:09 ` Dani Moncayo
2014-02-17 21:21 ` Juanma Barranquero
2014-02-17 19:06 ` Glenn Morris
2014-02-17 20:36 ` Eli Zaretskii
2014-02-17 18:58 ` Eli Zaretskii
2014-02-17 19:01 ` Glenn Morris
2014-02-17 19:13 ` Glenn Morris
2014-02-17 4:54 ` Eli Zaretskii
2014-02-17 11:42 ` Dani Moncayo
2014-02-17 12:32 ` Juanma Barranquero
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).