unofficial mirror of bug-gnu-emacs@gnu.org 
 help / color / mirror / code / Atom feed
* bug#69762: X11 versions of Emacs 29 on sparc fail at startup
@ 2024-03-12 17:57 ali_gnu2
  2024-03-13  0:34 ` Po Lu via Bug reports for GNU Emacs, the Swiss army knife of text editors
  0 siblings, 1 reply; 26+ messages in thread
From: ali_gnu2 @ 2024-03-12 17:57 UTC (permalink / raw)
  To: 69762

Hello,

    I maintain the the GNU emacs delivered with the
Solaris OS:

     https://github.com/oracle/solaris-userland/tree/master/components/emacs

We're still at version 28.2. It's getting long in the
tooth, so I recently tried to move to 29.2. There were no
issues on x86, but on sparc, I see display problems with
both the gtk (emacs-gtk) and lucid (emacs-x) versions that
prevent it from running.

I double checked version 28.2, which we are currently
delivering, and it has no problem. Then, I built 29.1,
and it shows the same issues as 29.2. It seems that
something was introduced early in the 29 series.

With the GTK version, I see 3 different failures on repeated
attempts:

1)

     % emacs-gtk
     Connection lost to X server 'localhost:10.0'
     When compiled with GTK, Emacs cannot recover from X disconnects.
     This is a GTK bug: https://gitlab.gnome.org/GNOME/gtk/issues/221
     For details, see etc/PROBLEMS.
     Fatal error 6: Aborted
     Backtrace:
     /usr/bin/emacs-gtk'emacs_backtrace+0x50 [0x1ffe749825f2ac]
     /usr/bin/emacs-gtk'terminate_due_to_signal+0xb4 [0x1ffe749822f804]
     /usr/bin/emacs-gtk'emacs_abort+0x8 [0x1ffe74982609c4]
     /usr/bin/emacs-gtk'x_connection_closed+0x3cc [0x1ffe74981efd54]
     /usr/bin/emacs-gtk'x_io_error_quitter+0x3c [0x1ffe74981f00f0]
     /usr/lib/sparcv9/libX11.so.4.0.0'_XIOError+0x74 [0x1ffe74904f8034]
     /usr/lib/sparcv9/libX11.so.4.0.0'_XReply+0x360 [0x1ffe74904f3bf0]
     /usr/lib/sparcv9/libXi.so.5.0.0'XIGetSelectedEvents+0x84 [0x1ffe748ed17044]
     /usr/bin/emacs-gtk'Fx_create_frame+0x17b4 [0x1ffe74982172fc]
     /usr/bin/emacs-gtk'funcall_subr+0x120 [0x1ffe74982e6f58]
     /usr/bin/emacs-gtk'exec_byte_code+0x52c [0x1ffe74983470e0]
     /usr/bin/emacs-gtk'Ffuncall+0x108 [0x1ffe74982e37d4]
     /usr/bin/emacs-gtk'Fapply+0x378 [0x1ffe74982e3c98]
     /usr/bin/emacs-gtk'funcall_subr+0xa8 [0x1ffe74982e6ee0]
     /usr/bin/emacs-gtk'exec_byte_code+0x52c [0x1ffe74983470e0]
     /usr/bin/emacs-gtk'apply_lambda+0xd4 [0x1ffe74982ea734]
     /usr/bin/emacs-gtk'eval_sub+0x630 [0x1ffe74982e88c0]
     /usr/bin/emacs-gtk'Feval+0x60 [0x1ffe74982ebb2c]
     /usr/bin/emacs-gtk'internal_condition_case+0x78 [0x1ffe74982e1bbc]
     /usr/bin/emacs-gtk'top_level_1+0x40 [0x1ffe7498233bd0]
     /usr/bin/emacs-gtk'internal_catch+0x40 [0x1ffe74982e1ae8]
     /usr/bin/emacs-gtk'command_loop+0xd8 [0x1ffe749823241c]
     /usr/bin/emacs-gtk'recursive_edit_1+0xb8 [0x1ffe7498237d4c]
     /usr/bin/emacs-gtk'Frecursive_edit+0x124 [0x1ffe7498238274]
     /usr/bin/emacs-gtk'main+0x1f28 [0x1ffe7498231770]
     /usr/bin/emacs-gtk'_start+0x64 [0x1ffe74980c5c04]
     Abort (core dumped)

     Note that I don't believe that X disconnects are involved.
     This happened immediately at startup.

2)

     % emacs-gtk
     [xcb] Unknown sequence number while processing queue
     [xcb] You called XInitThreads, this is not your fault
     [xcb] Aborting, sorry about that.
     Assertion failed: !xcb_xlib_threads_sequence_lost, file /builds/ulhg/mrcarson-trunk_166/components/x11/lib/libX11/libX11-1.8.7/src/xcb_io.c, line 278, function poll_for_event
     Fatal error 6: Aborted
     Backtrace:
     /usr/bin/emacs-gtk'emacs_backtrace+0x50 [0x1fffec39a5f2ac]
     /usr/bin/emacs-gtk'terminate_due_to_signal+0xb4 [0x1fffec39a2f804]
     /usr/bin/emacs-gtk'handle_fatal_signal+0x8 [0x1fffec39a609b0]
     /usr/bin/emacs-gtk'deliver_fatal_thread_signal+0x98 [0x1fffec39a5d4b8]
     /lib/sparcv9/libc.so.1'__sighndlr+0xc [0x1fffec392c6410]
     /lib/sparcv9/libc.so.1'call_user_handler+0x400 [0x1fffec392b8cb8]
     /lib/sparcv9/libc.so.1'sigacthandler+0xd0 [0x1fffec392b90a8]
     /lib/sparcv9/libc.so.1'__lwp_sigqueue+0x8 [0x1fffec392cb528]
     /lib/sparcv9/libc.so.1'abort+0xb4 [0x1fffec391e5154]
     /lib/sparcv9/libc.so.1'_assert_c99+0x64 [0x1fffec391e5ffc]
     /usr/lib/sparcv9/libX11.so.4.0.0'poll_for_event+0x1fc [0x1fffec31cf2a8c]
     /usr/lib/sparcv9/libX11.so.4.0.0'poll_for_response+0x2c [0x1fffec31cf2b2c]
     /usr/lib/sparcv9/libX11.so.4.0.0'_XEventsQueued+0x7c [0x1fffec31cf2e8c]
     /usr/lib/sparcv9/libX11.so.4.0.0'XFlush+0x1c [0x1fffec31cba45c]
     /usr/bin/emacs-gtk'x_set_icon_type+0x70 [0x1fffec39a0c640]
     /usr/bin/emacs-gtk'gui_set_frame_parameters_1+0x1800 [0x1fffec398e0028]
     /usr/bin/emacs-gtk'gui_default_parameter+0x58 [0x1fffec398e55e8]
     /usr/bin/emacs-gtk'Fx_create_frame+0xf20 [0x1fffec39a16a68]
     /usr/bin/emacs-gtk'funcall_subr+0x120 [0x1fffec39ae6f58]
     /usr/bin/emacs-gtk'exec_byte_code+0x52c [0x1fffec39b470e0]
     /usr/bin/emacs-gtk'Ffuncall+0x108 [0x1fffec39ae37d4]
     /usr/bin/emacs-gtk'Fapply+0x378 [0x1fffec39ae3c98]
     /usr/bin/emacs-gtk'funcall_subr+0xa8 [0x1fffec39ae6ee0]
     /usr/bin/emacs-gtk'exec_byte_code+0x52c [0x1fffec39b470e0]
     /usr/bin/emacs-gtk'apply_lambda+0xd4 [0x1fffec39aea734]
     /usr/bin/emacs-gtk'eval_sub+0x630 [0x1fffec39ae88c0]
     /usr/bin/emacs-gtk'Feval+0x60 [0x1fffec39aebb2c]
     /usr/bin/emacs-gtk'internal_condition_case+0x78 [0x1fffec39ae1bbc]
     /usr/bin/emacs-gtk'top_level_1+0x40 [0x1fffec39a33bd0]
     /usr/bin/emacs-gtk'internal_catch+0x40 [0x1fffec39ae1ae8]
     /usr/bin/emacs-gtk'command_loop+0xd8 [0x1fffec39a3241c]
     /usr/bin/emacs-gtk'recursive_edit_1+0xb8 [0x1fffec39a37d4c]
     /usr/bin/emacs-gtk'Frecursive_edit+0x124 [0x1fffec39a38274]
     /usr/bin/emacs-gtk'main+0x1f28 [0x1fffec39a31770]
     /usr/bin/emacs-gtk'_start+0x64 [0x1fffec398c5c04]
     Abort (core dumped)

3)

     Sometimes, this clobbers the state of my video card, leaving
     me with a black screen with a large white square in the upper
     left corner. When this happens, I log in remotely, and using
     ps, it appears that my desktop is still running, so the X server
     is unaware that the video hardware has been whacked. I can only
     assume that a bad request is not being caught by the X11 server,
     which is likely a second bug.

With the Lucid version, I normally get this result, after
a long pause:

     % emacs-x

     Connection lost to X server 'localhost:10.0'

The fact that both the plain X11, and GTK, versions, have
problems seems to point at some generic non-toolkit specific
X code. Perhaps this is an endian issue (x86 works fine), or
maybe there's some uninitialized data involved.

I asked Rainer Orth, who I work with on Solaris gcc issues, and
who I know is also an emacs user, and he was able to confirm the
same issues, using a different X server:

     >> Given that I'm still on 27.1.90/28.2 myself, I didn't.  On the sparc
     >> side, I primarily use emacs to run gdb, which I haven't done in a
     >> while.  I can give it a whirl, though.
     >
     > here's what I found: I configured emacs with
     >
     > configure \
     > 	'CFLAGS=-g3 -O2 -m64' \
     >         --prefix=/vol/gnu \
     >         --with-gif=ifavailable
     >         PKG_CONFIG_PATH=/usr/lib/64/pkgconfig:/usr/lib/64/pkgconfig:/usr/share/pkgconfig
     >
     > and built it with the bundled gcc 13.2.0.  Started just fine with emacs
     > -nw (to confirm the basics), but then I started it remotely from my
     > ThinLinc session at work (the thin client we use): that resulted in an
     > immediate SEGV of Xvnc and termination of the session.  I'm glad I
     > didn't try this from my session at home 😉
     >
     > The Xvnc backtrace is like this:
     >
     > (EE)
     > (EE) Backtrace:
     > (EE) 0: /opt/thinlinc/libexec/Xvnc (xorg_backtrace+0x41) [0x76a2f1]
     > (EE) 1: /opt/thinlinc/libexec/Xvnc (0x400000+0x36d909) [0x76d909]
     > (EE) 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f7341b61000+0x14420)
     > [0x7f7341b75420]
     > (EE) 3: /lib/x86_64-linux-gnu/libc.so.6 (0x7f73416d1000+0x18bb38)
     > [0x7f734185cb38]
     > (EE) 4: /opt/thinlinc/libexec/Xvnc (FlushClient+0x348) [0x76d228]
     > (EE) 5: /opt/thinlinc/libexec/Xvnc (WriteToClient+0x100) [0x76d460]
     > (EE) 6: /opt/thinlinc/libexec/Xvnc (ProcXIGetSelectedEvents+0x2a8) [0x54fd98]
     > (EE) 7: /opt/thinlinc/libexec/Xvnc (Dispatch+0x325) [0x71c925]
     > (EE) 8: /opt/thinlinc/libexec/Xvnc (dix_main+0x388) [0x720778]
     > (EE) 9: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xf3) [0x7f73416f5083]
     > (EE) 10: /opt/thinlinc/libexec/Xvnc (0x400000+0xc2fa0) [0x4c2fa0]
     > (EE)
     > (EE) Segmentation fault at address 0x17b40b60
     > (EE)
     >
     > I'm not sure if I can easily get a Xvnc core dump, though.

He also reports the same issue with Debian/sparc64, which
we think means that it seems not to be an OS-specific issue:

     > For comparison's sake, I tried the same with a Debian/sparc64 LDom I
     > have around for some LLVM and GCC work.  I installed emacs 29.2 there,
     > too (from packages this time) and was 'rewarded' with exactly the same
     > Xvnc SEGV as before.  So there's nothing Solaris specific in here, it
     > seems.

I'd appreciate it if someone who knows this code could have
a look. I'm happy to try patches or experiments to help narrow
the issue down further.

Thanks.

- Ali





^ permalink raw reply	[flat|nested] 26+ messages in thread

end of thread, other threads:[~2024-04-07  0:53 UTC | newest]

Thread overview: 26+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-03-12 17:57 bug#69762: X11 versions of Emacs 29 on sparc fail at startup ali_gnu2
2024-03-13  0:34 ` Po Lu via Bug reports for GNU Emacs, the Swiss army knife of text editors
2024-03-13 17:02   ` ali_gnu2
2024-03-14  0:17     ` Po Lu via Bug reports for GNU Emacs, the Swiss army knife of text editors
2024-03-14  5:56       ` Ali Bahrami
2024-03-14  6:16         ` Po Lu via Bug reports for GNU Emacs, the Swiss army knife of text editors
2024-03-15  1:48           ` Ali Bahrami
2024-03-15  2:46             ` Po Lu via Bug reports for GNU Emacs, the Swiss army knife of text editors
2024-03-15  4:22               ` Ali Bahrami
2024-03-15  6:42                 ` Po Lu via Bug reports for GNU Emacs, the Swiss army knife of text editors
2024-03-15 16:37                   ` Ali Bahrami
2024-03-16  0:21                     ` Po Lu via Bug reports for GNU Emacs, the Swiss army knife of text editors
2024-03-16  4:58                       ` Ali Bahrami
2024-03-16  6:28                         ` Po Lu via Bug reports for GNU Emacs, the Swiss army knife of text editors
2024-03-16  6:32                           ` Po Lu via Bug reports for GNU Emacs, the Swiss army knife of text editors
2024-03-17  1:13                           ` Ali Bahrami
2024-03-16 11:14     ` Eli Zaretskii
2024-03-16 12:24       ` Po Lu via Bug reports for GNU Emacs, the Swiss army knife of text editors
2024-03-17  1:38       ` ali_gnu2
2024-03-17 11:54         ` Po Lu via Bug reports for GNU Emacs, the Swiss army knife of text editors
2024-03-23 17:00           ` Alan Coopersmith
2024-04-03 17:48             ` Alan Coopersmith via Bug reports for GNU Emacs, the Swiss army knife of text editors
2024-04-06 10:34               ` Eli Zaretskii
2024-04-06 11:07                 ` Po Lu via Bug reports for GNU Emacs, the Swiss army knife of text editors
2024-04-06 16:36                   ` ali_gnu2
2024-04-07  0:53                     ` Po Lu via Bug reports for GNU Emacs, the Swiss army knife of text editors

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).