* bug#14605: Problem with export an .org file to .pdf does not open pdf file @ 2013-06-13 13:28 Petr Hracek 2013-06-25 11:07 ` Petr Hracek 0 siblings, 1 reply; 16+ messages in thread From: Petr Hracek @ 2013-06-13 13:28 UTC (permalink / raw) To: 14605 Hi folks, I would like to export some .org file into .pdf file. This should also open PDF after export is done but it does not. This is done by command C-c C-e d. In some case emacs freezes. Could you please help me? -- Best regards / S pozdravem Petr Hracek ^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#14605: Problem with export an .org file to .pdf does not open pdf file 2013-06-13 13:28 bug#14605: Problem with export an .org file to .pdf does not open pdf file Petr Hracek @ 2013-06-25 11:07 ` Petr Hracek 2013-08-13 13:14 ` Petr Hracek 0 siblings, 1 reply; 16+ messages in thread From: Petr Hracek @ 2013-06-25 11:07 UTC (permalink / raw) To: 14605 On 06/13/2013 03:28 PM, Petr Hracek wrote: > Hi folks, > > I would like to export some .org file into .pdf file. > This should also open PDF after export is done but it does not. > > This is done by command C-c C-e d. > In some case emacs freezes. > > Could you please help me? > Hi I have find out that if file org/org.el where are defined variables like org-file-apps is mentioned ("\\.pdf\\'" . default) When I changed them to e.g xpdf then pdf file is openned properly. -- Best regards / S pozdravem Petr Hracek ^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#14605: Problem with export an .org file to .pdf does not open pdf file 2013-06-25 11:07 ` Petr Hracek @ 2013-08-13 13:14 ` Petr Hracek 2013-08-17 12:31 ` Bastien 2013-09-02 5:35 ` bug#14605: [O] " Carsten Dominik 0 siblings, 2 replies; 16+ messages in thread From: Petr Hracek @ 2013-08-13 13:14 UTC (permalink / raw) To: 14605 Hi, I have browsed the lisp code of org.el where is mentioned: "External applications for opening `file:path' items in a document. Org-mode uses system defaults for different file types, but you can use this variable to set the application for a given file extension. The entries in this list are cons cells where the car identifies files and the cdr the corresponding command. Possible values for the file identifier are \"string\" A string as a file identifier can be interpreted in different ways, depending on its contents: - Alphanumeric characters only: Match links with this file extension. Example: (\"pdf\" . \"evince %s\") to open PDFs with evince. What does it mean system defaults? What command is used for getting default programs? xdg-mine or another? Thank you in advance greetings Petr On 06/25/2013 01:07 PM, Petr Hracek wrote: > On 06/13/2013 03:28 PM, Petr Hracek wrote: >> Hi folks, >> >> I would like to export some .org file into .pdf file. >> This should also open PDF after export is done but it does not. >> >> This is done by command C-c C-e d. >> In some case emacs freezes. >> >> Could you please help me? >> > Hi > > I have find out that if file org/org.el where are defined variables > like org-file-apps > is mentioned > ("\\.pdf\\'" . default) > > When I changed them to e.g xpdf then pdf file is openned properly. > -- Best regards / S pozdravem Petr Hracek ^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#14605: Problem with export an .org file to .pdf does not open pdf file 2013-08-13 13:14 ` Petr Hracek @ 2013-08-17 12:31 ` Bastien 2013-09-02 5:35 ` bug#14605: [O] " Carsten Dominik 1 sibling, 0 replies; 16+ messages in thread From: Bastien @ 2013-08-17 12:31 UTC (permalink / raw) To: Petr Hracek; +Cc: 14605-done Hi Petr, Petr Hracek <phracek@redhat.com> writes: > "External applications for opening `file:path' items in a document. > Org-mode uses system defaults for different file types, but > you can use this variable to set the application for a given file > extension. The entries in this list are cons cells where the car identifies > files and the cdr the corresponding command. Possible values for the > file identifier are > \"string\" A string as a file identifier can be interpreted in > different > ways, depending on its contents: > > - Alphanumeric characters only: > Match links with this file extension. > Example: (\"pdf\" . \"evince %s\") > to open PDFs with evince. > > What does it mean system defaults? It means mailcap. Org relies on mailcap.el behind the scene. > What command is used for getting default programs? > xdg-mine or another? Nope, mailcap. > Thank you in advance Best, -- Bastien ^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#14605: [O] bug#14605: Problem with export an .org file to .pdf does not open pdf file 2013-08-13 13:14 ` Petr Hracek 2013-08-17 12:31 ` Bastien @ 2013-09-02 5:35 ` Carsten Dominik 2013-09-02 8:34 ` Jambunathan K 1 sibling, 1 reply; 16+ messages in thread From: Carsten Dominik @ 2013-09-02 5:35 UTC (permalink / raw) To: Petr Hracek; +Cc: 14605 On 13.8.2013, at 15:14, Petr Hracek <phracek@redhat.com> wrote: > Hi, > > I have browsed the lisp code of org.el > where is mentioned: > "External applications for opening `file:path' items in a document. > Org-mode uses system defaults for different file types, but > you can use this variable to set the application for a given file > extension. The entries in this list are cons cells where the car identifies > files and the cdr the corresponding command. Possible values for the > file identifier are > \"string\" A string as a file identifier can be interpreted in different > ways, depending on its contents: > > - Alphanumeric characters only: > Match links with this file extension. > Example: (\"pdf\" . \"evince %s\") > to open PDFs with evince. > > What does it mean system defaults? > What command is used for getting default programs? > xdg-mine or another? > Thank you in advance Hi Petr, these defaults come from `org-file-apps-defaults-macosx' `org-file-apps-defaults-windowsnt' `org-file-apps-defaults-gnu' They are basically the "open" commands for MacOS X and Windows, and mailcap for Unix/Linux. Hope this helps - Carsten > > greetings > Petr > > On 06/25/2013 01:07 PM, Petr Hracek wrote: >> On 06/13/2013 03:28 PM, Petr Hracek wrote: >>> Hi folks, >>> >>> I would like to export some .org file into .pdf file. >>> This should also open PDF after export is done but it does not. >>> >>> This is done by command C-c C-e d. >>> In some case emacs freezes. >>> >>> Could you please help me? >>> >> Hi >> >> I have find out that if file org/org.el where are defined variables like org-file-apps >> is mentioned >> ("\\.pdf\\'" . default) >> >> When I changed them to e.g xpdf then pdf file is openned properly. >> > > > -- > Best regards / S pozdravem > Petr Hracek > > > > ^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#14605: [O] bug#14605: Problem with export an .org file to .pdf does not open pdf file 2013-09-02 5:35 ` bug#14605: [O] " Carsten Dominik @ 2013-09-02 8:34 ` Jambunathan K 2013-09-02 8:44 ` Carsten Dominik 0 siblings, 1 reply; 16+ messages in thread From: Jambunathan K @ 2013-09-02 8:34 UTC (permalink / raw) To: Carsten Dominik; +Cc: 14605 Carsten Dominik <carsten.dominik@gmail.com> writes: > They are basically the "open" commands for MacOS X and Windows, and > mailcap for Unix/Linux. The suggestion below is met with some approval in the Orgmode mailist earlier. http://lists.gnu.org/archive/html/emacs-orgmode/2013-07/msg00407.html Here I go. ---------------------------------------------------------------- Turn `org-file-apps-defaults-gnu' (which is now a defconst) in to defcustom and make xdg-open the default (or make a drop down list with gnome-open, kde-open for people who don't have xdg-utils insalled) . (defconst org-file-apps-defaults-gnu '((remote . emacs) (system . mailcap) (t . mailcap)) "Default file applications on a UNIX or GNU/Linux system. See `org-file-apps'.") (custom-set-variables '(org-file-apps (quote ((auto-mode . emacs) ("\\.mm\\'" . default) ("\\.x?html?\\'" . default) ("\\.pdf\\'" . default)))) '(org-file-apps-defaults-gnu (quote ((remote . emacs) (system . "xdg-open %s") (t . mailcap))) t)) ---------------------------------------------------------------- Anyways, opening a file outside of Emacs is not specific to Org. Other applications can open facility, if available right within Emacs core. For some discussion surrounging - `open-file' - see http://debbugs.gnu.org/cgi/bugreport.cgi?bug=14110 ^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#14605: [O] bug#14605: Problem with export an .org file to .pdf does not open pdf file 2013-09-02 8:34 ` Jambunathan K @ 2013-09-02 8:44 ` Carsten Dominik 2013-09-02 9:40 ` Jambunathan K ` (2 more replies) 0 siblings, 3 replies; 16+ messages in thread From: Carsten Dominik @ 2013-09-02 8:44 UTC (permalink / raw) To: Jambunathan K; +Cc: 14605 On Sep 2, 2013, at 10:34 AM, Jambunathan K <kjambunathan@gmail.com> wrote: > Carsten Dominik <carsten.dominik@gmail.com> writes: > >> They are basically the "open" commands for MacOS X and Windows, and >> mailcap for Unix/Linux. > > The suggestion below is met with some approval in the Orgmode mailist > earlier. > > http://lists.gnu.org/archive/html/emacs-orgmode/2013-07/msg00407.html > > Here I go. > ---------------------------------------------------------------- > > Turn `org-file-apps-defaults-gnu' (which is now a defconst) in to > defcustom and make xdg-open the default (or make a drop down list with > gnome-open, kde-open for people who don't have xdg-utils insalled) . > > (defconst org-file-apps-defaults-gnu > '((remote . emacs) > (system . mailcap) > (t . mailcap)) > "Default file applications on a UNIX or GNU/Linux system. > See `org-file-apps'.") > > > (custom-set-variables > '(org-file-apps > (quote > ((auto-mode . emacs) > ("\\.mm\\'" . default) > ("\\.x?html?\\'" . default) > ("\\.pdf\\'" . default)))) > '(org-file-apps-defaults-gnu > (quote > ((remote . emacs) > (system . "xdg-open %s") > (t . mailcap))) t)) > I have not followed the discussion earlier. The problem I see is that I do not know how widely available these commands are on Linux. Maybe we can built the default value using executable-find or something like this? - Carsten > ---------------------------------------------------------------- > > Anyways, opening a file outside of Emacs is not specific to Org. Other > applications can open facility, if available right within Emacs core. > > For some discussion surrounging - `open-file' - see > http://debbugs.gnu.org/cgi/bugreport.cgi?bug=14110 ^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#14605: [O] bug#14605: Problem with export an .org file to .pdf does not open pdf file 2013-09-02 8:44 ` Carsten Dominik @ 2013-09-02 9:40 ` Jambunathan K 2013-09-02 9:47 ` bug#14605: [O] bug#14605: " Suvayu Ali [not found] ` <20130902094701.GI2828@kuru.dyndns-at-home.com> 2 siblings, 0 replies; 16+ messages in thread From: Jambunathan K @ 2013-09-02 9:40 UTC (permalink / raw) To: Carsten Dominik; +Cc: 14605 Carsten Dominik <carsten.dominik@gmail.com> writes: >> (defconst org-file-apps-defaults-gnu ^^^^^^^^ That's a real issue. As for what defaults to use, their availability and installability that is a secondary issue altogether. If I were you, I will plug in xdg-open there, issue user-error and force the user to remedy the situation. You will hear if things don't work. Anyways what ever is done, we will be doing no worse (but only better than) the current defaults. ^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#14605: [O] bug#14605: bug#14605: Problem with export an .org file to .pdf does not open pdf file 2013-09-02 8:44 ` Carsten Dominik 2013-09-02 9:40 ` Jambunathan K @ 2013-09-02 9:47 ` Suvayu Ali 2013-09-02 10:12 ` Jambunathan K [not found] ` <20130902094701.GI2828@kuru.dyndns-at-home.com> 2 siblings, 1 reply; 16+ messages in thread From: Suvayu Ali @ 2013-09-02 9:47 UTC (permalink / raw) To: 14605 Hi Carsten, On Mon, Sep 02, 2013 at 10:44:39AM +0200, Carsten Dominik wrote: > > On Sep 2, 2013, at 10:34 AM, Jambunathan K <kjambunathan@gmail.com> wrote: > > > '(org-file-apps-defaults-gnu > > (quote > > ((remote . emacs) > > (system . "xdg-open %s") > > (t . mailcap))) t)) > > > > > I have not followed the discussion earlier. The problem I see is that > I do not know how widely available these commands are on Linux. Maybe > we can built the default value using executable-find or something like > this? I think I can shed some light on the availability of xdg-open. It is provided by xdg-utils, part of the freedesktop specification. It is expected to be present in most desktop systems (almost anything with a GUI installed). It is a direct dependency for kde-libs, gnome-libs, and many desktop applications. The introduction in this Archlinux wiki page gives a very succint summary: <https://wiki.archlinux.org/index.php/Xdg-open> Hope this helps, -- Suvayu Open source is the future. It sets us free. ^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#14605: [O] bug#14605: bug#14605: Problem with export an .org file to .pdf does not open pdf file 2013-09-02 9:47 ` bug#14605: [O] bug#14605: " Suvayu Ali @ 2013-09-02 10:12 ` Jambunathan K 2013-09-03 13:35 ` bug#14605: [O] bug#14605: " Suvayu Ali 0 siblings, 1 reply; 16+ messages in thread From: Jambunathan K @ 2013-09-02 10:12 UTC (permalink / raw) To: 14605 Suvayu Ali <fatkasuvayu+linux@gmail.com> writes: > It is expected to be present in most desktop systems (almost anything > with a GUI installed). I use Debian 6.05 (Squeeze) + XFCE. I had to install `xdg-open' by hand. (i.e., It is not installed during default installation). xdg-open is just a shell script and tries lots of different things based on Desktop Environment. Why should Org re-implement the wheel? When the variable is configurable, why hesitate pluggin in *better* default, even if it be not-installed. Can Org really do all this? ---------------- - kde-open "$1" - kfmclient openURL "$1" - kfmclient exec "$1" ---------------- - gvfs-open "$1" - gnome-open "$1" ---------------- - exo-open "$1" ---------------- - Whatever is registered with xdg-mime registry ---------------- - run-mailcap --action=view "$file" - mimeopen -n "$file" - sensible-browser ---------------- ^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#14605: [O] bug#14605: bug#14605: bug#14605: Problem with export an .org file to .pdf does not open pdf file 2013-09-02 10:12 ` Jambunathan K @ 2013-09-03 13:35 ` Suvayu Ali 0 siblings, 0 replies; 16+ messages in thread From: Suvayu Ali @ 2013-09-03 13:35 UTC (permalink / raw) To: 14605 On Mon, Sep 02, 2013 at 03:42:23PM +0530, Jambunathan K wrote: > Suvayu Ali <fatkasuvayu+linux@gmail.com> writes: > > > It is expected to be present in most desktop systems (almost anything > > with a GUI installed). > > I use Debian 6.05 (Squeeze) + XFCE. I had to install `xdg-open' by > hand. (i.e., It is not installed during default installation). XFCE (and LXDE) uses exo-open. Although it does not require xdg-open, it is compliant. Meaning, if xdg-utils is installed, xdg-open will work. Gnome, KDE, on the other hand require it on most distributions (Fedora is an example). > xdg-open is just a shell script and tries lots of different things based > on Desktop Environment. Why should Org re-implement the wheel? Exactly! Since you look for the executable before calling, there is nothing to lose. If xdg-open is present, it will work if there is a GUI. Cheers, PS: I'm an XFCE (with xdg-utils) and emacs -nw user on Fedora. -- Suvayu Open source is the future. It sets us free. ^ permalink raw reply [flat|nested] 16+ messages in thread
[parent not found: <20130902094701.GI2828@kuru.dyndns-at-home.com>]
* bug#14605: [O] bug#14605: bug#14605: bug#14605: Problem with export an .org file to .pdf does not open pdf file [not found] ` <20130902094701.GI2828@kuru.dyndns-at-home.com> @ 2013-09-02 9:55 ` Carsten Dominik 2013-09-02 10:08 ` Carsten Dominik 1 sibling, 0 replies; 16+ messages in thread From: Carsten Dominik @ 2013-09-02 9:55 UTC (permalink / raw) To: Suvayu Ali; +Cc: 14605 On Sep 2, 2013, at 11:47 AM, Suvayu Ali <fatkasuvayu+linux@gmail.com> wrote: > Hi Carsten, > > On Mon, Sep 02, 2013 at 10:44:39AM +0200, Carsten Dominik wrote: >> >> On Sep 2, 2013, at 10:34 AM, Jambunathan K <kjambunathan@gmail.com> wrote: >> >>> '(org-file-apps-defaults-gnu >>> (quote >>> ((remote . emacs) >>> (system . "xdg-open %s") >>> (t . mailcap))) t)) >>> >> >> >> I have not followed the discussion earlier. The problem I see is that >> I do not know how widely available these commands are on Linux. Maybe >> we can built the default value using executable-find or something like >> this? > > I think I can shed some light on the availability of xdg-open. It is > provided by xdg-utils, part of the freedesktop specification. It is > expected to be present in most desktop systems (almost anything with a > GUI installed). It is a direct dependency for kde-libs, gnome-libs, and > many desktop applications. I just love it when someone give such a concrete and useful answer. Thank you! - Carsten > > The introduction in this Archlinux wiki page gives a very succint > summary: <https://wiki.archlinux.org/index.php/Xdg-open> > > Hope this helps, > > -- > Suvayu > > Open source is the future. It sets us free. > > > ^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#14605: [O] bug#14605: bug#14605: bug#14605: Problem with export an .org file to .pdf does not open pdf file [not found] ` <20130902094701.GI2828@kuru.dyndns-at-home.com> 2013-09-02 9:55 ` Carsten Dominik @ 2013-09-02 10:08 ` Carsten Dominik 2013-09-02 10:20 ` Jambunathan K ` (2 more replies) 1 sibling, 3 replies; 16+ messages in thread From: Carsten Dominik @ 2013-09-02 10:08 UTC (permalink / raw) To: Suvayu Ali; +Cc: 14605 Hi everyone, OK, we now use xdg-open when available on a Linux system. Thanks to everyone for the input. - Carsten On Sep 2, 2013, at 11:47 AM, Suvayu Ali <fatkasuvayu+linux@gmail.com> wrote: > Hi Carsten, > > On Mon, Sep 02, 2013 at 10:44:39AM +0200, Carsten Dominik wrote: >> >> On Sep 2, 2013, at 10:34 AM, Jambunathan K <kjambunathan@gmail.com> wrote: >> >>> '(org-file-apps-defaults-gnu >>> (quote >>> ((remote . emacs) >>> (system . "xdg-open %s") >>> (t . mailcap))) t)) >>> >> >> >> I have not followed the discussion earlier. The problem I see is that >> I do not know how widely available these commands are on Linux. Maybe >> we can built the default value using executable-find or something like >> this? > > I think I can shed some light on the availability of xdg-open. It is > provided by xdg-utils, part of the freedesktop specification. It is > expected to be present in most desktop systems (almost anything with a > GUI installed). It is a direct dependency for kde-libs, gnome-libs, and > many desktop applications. > > The introduction in this Archlinux wiki page gives a very succint > summary: <https://wiki.archlinux.org/index.php/Xdg-open> > > Hope this helps, > > -- > Suvayu > > Open source is the future. It sets us free. > > > ^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#14605: [O] bug#14605: bug#14605: bug#14605: Problem with export an .org file to .pdf does not open pdf file 2013-09-02 10:08 ` Carsten Dominik @ 2013-09-02 10:20 ` Jambunathan K 2013-09-02 16:22 ` bug#14605: [O] bug#14605: " Torsten Wagner 2013-09-03 4:59 ` Jambunathan K 2 siblings, 0 replies; 16+ messages in thread From: Jambunathan K @ 2013-09-02 10:20 UTC (permalink / raw) To: Carsten Dominik; +Cc: 14605, Suvayu Ali Carsten Dominik <carsten.dominik@gmail.com> writes: > OK, we now use xdg-open when available on a Linux system. The variable MUST be a defcustom. ^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#14605: [O] bug#14605: bug#14605: bug#14605: bug#14605: Problem with export an .org file to .pdf does not open pdf file 2013-09-02 10:08 ` Carsten Dominik 2013-09-02 10:20 ` Jambunathan K @ 2013-09-02 16:22 ` Torsten Wagner 2013-09-03 4:59 ` Jambunathan K 2 siblings, 0 replies; 16+ messages in thread From: Torsten Wagner @ 2013-09-02 16:22 UTC (permalink / raw) To: Carsten Dominik; +Cc: 14605, Suvayu Ali [-- Attachment #1: Type: text/plain, Size: 2190 bytes --] Hi Carsten, just by chance I read this thread. It might be a good idea to announce this somehow for package maintainers on a prominent place in the change-log of the next official release. Some Linux package systems do allow recommendation on packages. As I understood the xdg-utils package is not mandatory for using org-mode, because it would work without xdg-open too. However, we could ask the package maintainers to make a recommendation to install xdg-util whenever, org-mode gets installed. Just a nice customer service ;) BTW: Emacs itself does *not* require xdg-utils or refer to it as optional. That would have made it even easier to assume it is already on all Linux systems. All the best Torsten On 2 September 2013 12:08, Carsten Dominik <carsten.dominik@gmail.com>wrote: > Hi everyone, > > OK, we now use xdg-open when available on a Linux system. > > Thanks to everyone for the input. > > - Carsten > > On Sep 2, 2013, at 11:47 AM, Suvayu Ali <fatkasuvayu+linux@gmail.com> > wrote: > > > Hi Carsten, > > > > On Mon, Sep 02, 2013 at 10:44:39AM +0200, Carsten Dominik wrote: > >> > >> On Sep 2, 2013, at 10:34 AM, Jambunathan K <kjambunathan@gmail.com> > wrote: > >> > >>> '(org-file-apps-defaults-gnu > >>> (quote > >>> ((remote . emacs) > >>> (system . "xdg-open %s") > >>> (t . mailcap))) t)) > >>> > >> > >> > >> I have not followed the discussion earlier. The problem I see is that > >> I do not know how widely available these commands are on Linux. Maybe > >> we can built the default value using executable-find or something like > >> this? > > > > I think I can shed some light on the availability of xdg-open. It is > > provided by xdg-utils, part of the freedesktop specification. It is > > expected to be present in most desktop systems (almost anything with a > > GUI installed). It is a direct dependency for kde-libs, gnome-libs, and > > many desktop applications. > > > > The introduction in this Archlinux wiki page gives a very succint > > summary: <https://wiki.archlinux.org/index.php/Xdg-open> > > > > Hope this helps, > > > > -- > > Suvayu > > > > Open source is the future. It sets us free. > > > > > > > > > > > [-- Attachment #2: Type: text/html, Size: 3264 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#14605: Problem with export an .org file to .pdf does not open pdf file 2013-09-02 10:08 ` Carsten Dominik 2013-09-02 10:20 ` Jambunathan K 2013-09-02 16:22 ` bug#14605: [O] bug#14605: " Torsten Wagner @ 2013-09-03 4:59 ` Jambunathan K 2 siblings, 0 replies; 16+ messages in thread From: Jambunathan K @ 2013-09-03 4:59 UTC (permalink / raw) To: Carsten Dominik; +Cc: 14605, Suvayu Ali Carsten Dominik <carsten.dominik@gmail.com> writes: > OK, we now use xdg-open when available on a Linux system. Just realized that you have reverted the commit (a bit too early). Emacs goes through a long pre-test cycle for a reason. There is a plenty of room to test the waters on how useful or problematic xdg-open is. Anyways... ^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2013-09-03 13:35 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-06-13 13:28 bug#14605: Problem with export an .org file to .pdf does not open pdf file Petr Hracek
2013-06-25 11:07 ` Petr Hracek
2013-08-13 13:14 ` Petr Hracek
2013-08-17 12:31 ` Bastien
2013-09-02 5:35 ` bug#14605: [O] " Carsten Dominik
2013-09-02 8:34 ` Jambunathan K
2013-09-02 8:44 ` Carsten Dominik
2013-09-02 9:40 ` Jambunathan K
2013-09-02 9:47 ` bug#14605: [O] bug#14605: " Suvayu Ali
2013-09-02 10:12 ` Jambunathan K
2013-09-03 13:35 ` bug#14605: [O] bug#14605: " Suvayu Ali
[not found] ` <20130902094701.GI2828@kuru.dyndns-at-home.com>
2013-09-02 9:55 ` Carsten Dominik
2013-09-02 10:08 ` Carsten Dominik
2013-09-02 10:20 ` Jambunathan K
2013-09-02 16:22 ` bug#14605: [O] bug#14605: " Torsten Wagner
2013-09-03 4:59 ` Jambunathan K
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).