unofficial mirror of bug-gnu-emacs@gnu.org 
 help / color / mirror / code / Atom feed
* battery.el patch
@ 2004-08-09 20:25 Ralph Schleicher
  0 siblings, 0 replies; 4+ messages in thread
From: Ralph Schleicher @ 2004-08-09 20:25 UTC (permalink / raw)


Hi,

below is a patch Kurt Hornik sent to me last week fixing a problem with
the latest Linux kernel.  The patch is against battery.el version 1.19
from Emacs CVS.  Thanks.


2004-08-09  Kurt Hornik  <Kurt.Hornik@wu-wien.ac.at>

	* battery.el (battery-linux-proc-acpi): Look into battery
	directories matching the literal string CMB, too (required
	for Linux 2.6.7).


--- battery.el~	2004-08-09 21:40:34.000000000 +0200
+++ battery.el	2004-08-09 21:49:21.000000000 +0200
@@ -290,7 +290,7 @@
 				      nil t)
 	       (setq low (+ (or low 0)
 			    (string-to-int (match-string 1))))))))
-       (directory-files "/proc/acpi/battery/" t "BAT")))
+       (directory-files "/proc/acpi/battery/" t "\\(BAT\\|CMB\\)")))
     (and capacity rate
 	 (setq minutes (if (zerop rate) 0
 			 (floor (* (/ (float (if (string= charging-state


-- 
Ralph

^ permalink raw reply	[flat|nested] 4+ messages in thread

* battery.el patch
@ 2004-09-14 20:33 Ralph Schleicher
       [not found] ` <E1C7bwj-0001T6-HR@fencepost.gnu.org>
  0 siblings, 1 reply; 4+ messages in thread
From: Ralph Schleicher @ 2004-09-14 20:33 UTC (permalink / raw)


Hi,

please find attached a patch against battery.el version 1.20 from Emacs
CVS together with a ChangeLog entry.  The patch provides some source
code cleanups and a fail-save solution for "non-standard" battery
subdirectory names for the ACPI driver of the Linux kernel.  The later
turned out to be a hardware issue because the battery subdirectory names
are not choosen by the ACPI driver.  Instead, the ACPI driver uses the
battery name as provided by the hardware.


2004-09-13  Ralph Schleicher  <rs@nunatak.allgaeu.org>

	* battery.el: Delete superfluous empty lines.
	Change single back-quotes into single quotes in all comments.
	(battery-linux-proc-acpi): Attempt to gather information from
	all battery subdirectories regardless of their file name.
	(battery-linux-proc-apm): Replace all occurrences of
	battery-hex-to-int-2 with string-to-int (base 16).
	(battery-hex-to-int-2): Delete function.
	(battery-hex-to-int): Delete function.
	(battery-hex-map): Delete variable.


--- battery.el~	2004-08-09 21:49:21.000000000 +0200
+++ battery.el	2004-09-13 21:55:45.000000000 +0200
@@ -24,8 +24,8 @@
 
 ;;; Commentary:
 
-;; There is at present support for interpreting the new `/proc/apm'
-;; file format of Linux version 1.3.58 or newer and for the `/proc/acpi/'
+;; There is at present support for interpreting the new '/proc/apm'
+;; file format of Linux version 1.3.58 or newer and for the '/proc/acpi/'
 ;; directory structure of Linux 2.4.20 and 2.6.
 
 ;;; Code:
@@ -33,7 +33,6 @@
 (require 'timer)
 
 \f
-
 (defgroup battery nil
   "Display battery status information."
   :prefix "battery-"
@@ -137,7 +136,7 @@
   (force-mode-line-update))
 
 \f
-;;; `/proc/apm' interface for Linux.
+;;; '/proc/apm' interface for Linux.
 
 (defconst battery-linux-proc-apm-regexp
   (concat "^\\([^ ]+\\)"		; Driver version.
@@ -182,20 +181,20 @@
 	  (re-search-forward battery-linux-proc-apm-regexp)
 	  (setq driver-version (match-string 1))
 	  (setq bios-version (match-string 2))
-	  (setq tem (battery-hex-to-int-2 (match-string 3)))
+	  (setq tem (string-to-int (match-string 3) 16))
 	  (if (not (logand tem 2))
 	      (setq bios-interface "not supported")
 	    (setq bios-interface "enabled")
 	    (cond ((logand tem 16) (setq bios-interface "disabled"))
 		  ((logand tem 32) (setq bios-interface "disengaged")))
-	    (setq tem (battery-hex-to-int-2 (match-string 4)))
+	    (setq tem (string-to-int (match-string 4) 16))
 	    (cond ((= tem 0) (setq line-status "off-line"))
 		  ((= tem 1) (setq line-status "on-line"))
 		  ((= tem 2) (setq line-status "on backup")))
-	    (setq tem (battery-hex-to-int-2 (match-string 6)))
+	    (setq tem (string-to-int (match-string 6) 16))
 	    (if (= tem 255)
 		(setq battery-status "N/A")
-	      (setq tem (battery-hex-to-int-2 (match-string 5)))
+	      (setq tem (string-to-int (match-string 5) 16))
 	      (cond ((= tem 0) (setq battery-status "high"
 				     battery-status-symbol ""))
 		    ((= tem 1) (setq battery-status "low"
@@ -225,7 +224,7 @@
 	  (cons ?t (or remaining-time "N/A")))))
 
 \f
-;;; `/proc/acpi/' interface for Linux.
+;;; '/proc/acpi/' interface for Linux.
 
 (defun battery-linux-proc-acpi ()
   "Get ACPI status information from Linux kernel.
@@ -245,52 +244,62 @@
 %t Remaining time in the form `h:min'"
   (let (capacity design-capacity rate rate-type charging-state warn low
 		 minutes hours)
-    (when (file-directory-p "/proc/acpi/battery/")
-      ;; ACPI provides information about each battery present in the system in
-      ;; a separate subdirectory.  We are going to merge the available
-      ;; information together since displaying for a variable amount of
-      ;; batteries seems overkill for format-strings.
-      (mapc
-       (lambda (dir)
-	 (with-temp-buffer
-	   (insert-file-contents (expand-file-name "state" dir))
-	   (when (re-search-forward "present: +yes$" nil t)
-	     (and (re-search-forward "charging state: +\\(.*\\)$" nil t)
-		  (or (null charging-state) (string= charging-state
-						     "unknown"))
-		  ;; On most multi-battery systems, most of the time only one
-		  ;; battery is "charging"/"discharging", the others are
-		  ;; "unknown".
-		  (setq charging-state (match-string 1)))
-	     (when (re-search-forward "present rate: +\\([0-9]+\\) \\(m[AW]\\)$"
-				      nil t)
-	       (setq rate (+ (or rate 0) (string-to-int (match-string 1)))
-		     rate-type (or (and rate-type
-					(if (string= rate-type (match-string 2))
-					    rate-type
-					  (error
-					   "Inconsistent rate types (%s vs. %s)"
-					   rate-type (match-string 2))))
-				   (match-string 2))))
-	     (when (re-search-forward "remaining capacity: +\\([0-9]+\\) m[AW]h$"
-				      nil t)
-	       (setq capacity
-		     (+ (or capacity 0) (string-to-int (match-string 1))))))
-	   (goto-char (point-max))
-	   (insert-file-contents (expand-file-name "info" dir))
-	   (when (re-search-forward "present: +yes$" nil t)
-	     (when (re-search-forward "design capacity: +\\([0-9]+\\) m[AW]h$"
-				      nil t)
-	       (setq design-capacity (+ (or design-capacity 0)
-					(string-to-int (match-string 1)))))
-	     (when (re-search-forward "design capacity warning: +\\([0-9]+\\) m[AW]h$"
-				      nil t)
-	       (setq warn (+ (or warn 0) (string-to-int (match-string 1)))))
-	     (when (re-search-forward "design capacity low: +\\([0-9]+\\) m[AW]h$"
-				      nil t)
-	       (setq low (+ (or low 0)
-			    (string-to-int (match-string 1))))))))
-       (directory-files "/proc/acpi/battery/" t "\\(BAT\\|CMB\\)")))
+    ;; ACPI provides information about each battery present in the system
+    ;; in a separate subdirectory.  We are going to merge the available
+    ;; information together since displaying for a variable amount of
+    ;; batteries seems overkill for format-strings.
+    (with-temp-buffer
+      (mapc (lambda (dir)
+	      (if (string-match "/\\.\\.?\\'" dir)
+		  nil
+		(delete-region (point-min) (point-max))
+		(condition-case nil
+		    (insert-file-contents (expand-file-name "state" dir))
+		  (error nil))
+		(when (re-search-forward "present: +yes$" nil t)
+		  (and (re-search-forward
+			"charging state: +\\(.*\\)$" nil t)
+		       (or (null charging-state)
+			   (string= charging-state "unknown"))
+		       ;; On most multi-battery systems, most of the time
+		       ;; only one battery is "charging/discharging", the
+		       ;; others are "unknown".
+		       (setq charging-state (match-string 1)))
+		  (when (re-search-forward
+			 "present rate: +\\([0-9]+\\) \\(m[AW]\\)$" nil t)
+		    (setq rate (+ (or rate 0)
+				  (string-to-int (match-string 1)))
+			  rate-type (or (and rate-type
+					     (if (string= rate-type (match-string 2))
+						 rate-type
+					       (error
+						"Inconsistent rate types (%s vs. %s)"
+						rate-type (match-string 2))))
+					(match-string 2))))
+		  (when (re-search-forward
+			 "remaining capacity: +\\([0-9]+\\) m[AW]h$" nil t)
+		    (setq capacity (+ (or capacity 0)
+				      (string-to-int (match-string 1))))))
+		(goto-char (point-max))
+		(condition-case nil
+		    (insert-file-contents (expand-file-name "info" dir))
+		  (error nil))
+		(when (re-search-forward "present: +yes$" nil t)
+		  (when (re-search-forward
+			 "design capacity: +\\([0-9]+\\) m[AW]h$" nil t)
+		    (setq design-capacity (+ (or design-capacity 0)
+					     (string-to-int (match-string 1)))))
+		  (when (re-search-forward
+			 "design capacity warning: +\\([0-9]+\\) m[AW]h$" nil t)
+		    (setq warn (+ (or warn 0)
+				  (string-to-int (match-string 1)))))
+		  (when (re-search-forward
+			 "design capacity low: +\\([0-9]+\\) m[AW]h$" nil t)
+		    (setq low (+ (or low 0)
+				 (string-to-int (match-string 1))))))))
+	    (condition-case nil
+		(directory-files "/proc/acpi/battery/" t)
+	      (error nil))))
     (and capacity rate
 	 (setq minutes (if (zerop rate) 0
 			 (floor (* (/ (float (if (string= charging-state
@@ -366,32 +375,6 @@
 	(setq result (concat result "%")))
     result))
 
-(defconst battery-hex-map '((?0 .  0) (?1 .  1) (?2 .  2) (?3 .  3)
-			    (?4 .  4) (?5 .  5) (?6 .  6) (?7 .  7)
-			    (?8 .  8) (?9 .  9) (?a . 10) (?b . 11)
-			    (?c . 12) (?d . 13) (?e . 14) (?f . 15)))
-
-(defun battery-hex-to-int (string)
-  "Convert a hexadecimal number (a string) into a number."
-  (save-match-data
-    (and (string-match "^[ \t]+" string)
-	 (setq string (substring string (match-end 0))))
-    (and (string-match "^0[xX]" string)
-	 (setq string (substring string (match-end 0)))))
-  (battery-hex-to-int-2 string))
-
-(defun battery-hex-to-int-2 (string)
-  (let ((index 0)
-	(length (length string))
-	(value 0)
-	(elem nil))
-    (while (and (< index length)
-		(setq elem (assoc (downcase (aref string index))
-				  battery-hex-map)))
-      (setq value (+ (* 16 value) (cdr elem))
-	    index (1+ index)))
-    value))
-
 \f
 (provide 'battery)
 

-- 
Ralph

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: battery.el patch
       [not found] ` <E1C7bwj-0001T6-HR@fencepost.gnu.org>
@ 2004-09-15 21:59   ` Ralph Schleicher
  0 siblings, 0 replies; 4+ messages in thread
From: Ralph Schleicher @ 2004-09-15 21:59 UTC (permalink / raw)
  Cc: bug-gnu-emacs

Richard Stallman wrote:

>	    Change single back-quotes into single quotes in all comments.
[...]
> Could you send a diff with all the changes except those?

Here is the revised patch and ChangeLog entry.


2004-09-13  Ralph Schleicher  <rs@nunatak.allgaeu.org>

	* battery.el: Delete superfluous empty lines.
	(battery-linux-proc-acpi): Attempt to gather information from
	all battery subdirectories regardless of their file name.
	(battery-linux-proc-apm): Replace all occurrences of
	battery-hex-to-int-2 with string-to-int (base 16).
	(battery-hex-to-int-2): Delete function.
	(battery-hex-to-int): Delete function.
	(battery-hex-map): Delete variable.


--- battery.el~	2004-08-09 21:49:21.000000000 +0200
+++ battery.el	2004-09-15 23:42:44.000000000 +0200
@@ -33,7 +33,6 @@
 (require 'timer)
 
 \f
-
 (defgroup battery nil
   "Display battery status information."
   :prefix "battery-"
@@ -182,20 +181,20 @@
 	  (re-search-forward battery-linux-proc-apm-regexp)
 	  (setq driver-version (match-string 1))
 	  (setq bios-version (match-string 2))
-	  (setq tem (battery-hex-to-int-2 (match-string 3)))
+	  (setq tem (string-to-int (match-string 3) 16))
 	  (if (not (logand tem 2))
 	      (setq bios-interface "not supported")
 	    (setq bios-interface "enabled")
 	    (cond ((logand tem 16) (setq bios-interface "disabled"))
 		  ((logand tem 32) (setq bios-interface "disengaged")))
-	    (setq tem (battery-hex-to-int-2 (match-string 4)))
+	    (setq tem (string-to-int (match-string 4) 16))
 	    (cond ((= tem 0) (setq line-status "off-line"))
 		  ((= tem 1) (setq line-status "on-line"))
 		  ((= tem 2) (setq line-status "on backup")))
-	    (setq tem (battery-hex-to-int-2 (match-string 6)))
+	    (setq tem (string-to-int (match-string 6) 16))
 	    (if (= tem 255)
 		(setq battery-status "N/A")
-	      (setq tem (battery-hex-to-int-2 (match-string 5)))
+	      (setq tem (string-to-int (match-string 5) 16))
 	      (cond ((= tem 0) (setq battery-status "high"
 				     battery-status-symbol ""))
 		    ((= tem 1) (setq battery-status "low"
@@ -245,52 +244,62 @@
 %t Remaining time in the form `h:min'"
   (let (capacity design-capacity rate rate-type charging-state warn low
 		 minutes hours)
-    (when (file-directory-p "/proc/acpi/battery/")
-      ;; ACPI provides information about each battery present in the system in
-      ;; a separate subdirectory.  We are going to merge the available
-      ;; information together since displaying for a variable amount of
-      ;; batteries seems overkill for format-strings.
-      (mapc
-       (lambda (dir)
-	 (with-temp-buffer
-	   (insert-file-contents (expand-file-name "state" dir))
-	   (when (re-search-forward "present: +yes$" nil t)
-	     (and (re-search-forward "charging state: +\\(.*\\)$" nil t)
-		  (or (null charging-state) (string= charging-state
-						     "unknown"))
-		  ;; On most multi-battery systems, most of the time only one
-		  ;; battery is "charging"/"discharging", the others are
-		  ;; "unknown".
-		  (setq charging-state (match-string 1)))
-	     (when (re-search-forward "present rate: +\\([0-9]+\\) \\(m[AW]\\)$"
-				      nil t)
-	       (setq rate (+ (or rate 0) (string-to-int (match-string 1)))
-		     rate-type (or (and rate-type
-					(if (string= rate-type (match-string 2))
-					    rate-type
-					  (error
-					   "Inconsistent rate types (%s vs. %s)"
-					   rate-type (match-string 2))))
-				   (match-string 2))))
-	     (when (re-search-forward "remaining capacity: +\\([0-9]+\\) m[AW]h$"
-				      nil t)
-	       (setq capacity
-		     (+ (or capacity 0) (string-to-int (match-string 1))))))
-	   (goto-char (point-max))
-	   (insert-file-contents (expand-file-name "info" dir))
-	   (when (re-search-forward "present: +yes$" nil t)
-	     (when (re-search-forward "design capacity: +\\([0-9]+\\) m[AW]h$"
-				      nil t)
-	       (setq design-capacity (+ (or design-capacity 0)
-					(string-to-int (match-string 1)))))
-	     (when (re-search-forward "design capacity warning: +\\([0-9]+\\) m[AW]h$"
-				      nil t)
-	       (setq warn (+ (or warn 0) (string-to-int (match-string 1)))))
-	     (when (re-search-forward "design capacity low: +\\([0-9]+\\) m[AW]h$"
-				      nil t)
-	       (setq low (+ (or low 0)
-			    (string-to-int (match-string 1))))))))
-       (directory-files "/proc/acpi/battery/" t "\\(BAT\\|CMB\\)")))
+    ;; ACPI provides information about each battery present in the system
+    ;; in a separate subdirectory.  We are going to merge the available
+    ;; information together since displaying for a variable amount of
+    ;; batteries seems overkill for format-strings.
+    (with-temp-buffer
+      (mapc (lambda (dir)
+	      (if (string-match "/\\.\\.?\\'" dir)
+		  nil
+		(delete-region (point-min) (point-max))
+		(condition-case nil
+		    (insert-file-contents (expand-file-name "state" dir))
+		  (error nil))
+		(when (re-search-forward "present: +yes$" nil t)
+		  (and (re-search-forward
+			"charging state: +\\(.*\\)$" nil t)
+		       (or (null charging-state)
+			   (string= charging-state "unknown"))
+		       ;; On most multi-battery systems, most of the time
+		       ;; only one battery is "charging/discharging", the
+		       ;; others are "unknown".
+		       (setq charging-state (match-string 1)))
+		  (when (re-search-forward
+			 "present rate: +\\([0-9]+\\) \\(m[AW]\\)$" nil t)
+		    (setq rate (+ (or rate 0)
+				  (string-to-int (match-string 1)))
+			  rate-type (or (and rate-type
+					     (if (string= rate-type (match-string 2))
+						 rate-type
+					       (error
+						"Inconsistent rate types (%s vs. %s)"
+						rate-type (match-string 2))))
+					(match-string 2))))
+		  (when (re-search-forward
+			 "remaining capacity: +\\([0-9]+\\) m[AW]h$" nil t)
+		    (setq capacity (+ (or capacity 0)
+				      (string-to-int (match-string 1))))))
+		(goto-char (point-max))
+		(condition-case nil
+		    (insert-file-contents (expand-file-name "info" dir))
+		  (error nil))
+		(when (re-search-forward "present: +yes$" nil t)
+		  (when (re-search-forward
+			 "design capacity: +\\([0-9]+\\) m[AW]h$" nil t)
+		    (setq design-capacity (+ (or design-capacity 0)
+					     (string-to-int (match-string 1)))))
+		  (when (re-search-forward
+			 "design capacity warning: +\\([0-9]+\\) m[AW]h$" nil t)
+		    (setq warn (+ (or warn 0)
+				  (string-to-int (match-string 1)))))
+		  (when (re-search-forward
+			 "design capacity low: +\\([0-9]+\\) m[AW]h$" nil t)
+		    (setq low (+ (or low 0)
+				 (string-to-int (match-string 1))))))))
+	    (condition-case nil
+		(directory-files "/proc/acpi/battery/" t)
+	      (error nil))))
     (and capacity rate
 	 (setq minutes (if (zerop rate) 0
 			 (floor (* (/ (float (if (string= charging-state
@@ -366,32 +375,6 @@
 	(setq result (concat result "%")))
     result))
 
-(defconst battery-hex-map '((?0 .  0) (?1 .  1) (?2 .  2) (?3 .  3)
-			    (?4 .  4) (?5 .  5) (?6 .  6) (?7 .  7)
-			    (?8 .  8) (?9 .  9) (?a . 10) (?b . 11)
-			    (?c . 12) (?d . 13) (?e . 14) (?f . 15)))
-
-(defun battery-hex-to-int (string)
-  "Convert a hexadecimal number (a string) into a number."
-  (save-match-data
-    (and (string-match "^[ \t]+" string)
-	 (setq string (substring string (match-end 0))))
-    (and (string-match "^0[xX]" string)
-	 (setq string (substring string (match-end 0)))))
-  (battery-hex-to-int-2 string))
-
-(defun battery-hex-to-int-2 (string)
-  (let ((index 0)
-	(length (length string))
-	(value 0)
-	(elem nil))
-    (while (and (< index length)
-		(setq elem (assoc (downcase (aref string index))
-				  battery-hex-map)))
-      (setq value (+ (* 16 value) (cdr elem))
-	    index (1+ index)))
-    value))
-
 \f
 (provide 'battery)
 

-- 
Ralph

^ permalink raw reply	[flat|nested] 4+ messages in thread

* battery.el patch
@ 2007-01-07 10:01 Ralph Schleicher
  0 siblings, 0 replies; 4+ messages in thread
From: Ralph Schleicher @ 2007-01-07 10:01 UTC (permalink / raw)
  Cc: Luigi Panzeri

Hi,

below is a patch for battery.el (CVS revision 1.38) together with the
associated ChangeLog entry.  Please commit it into Emacs CVS.


2007-01-07  Ralph Schleicher  <rs@nunatak.allgaeu.org>

	* battery.el (battery-linux-proc-acpi): Ignore errors when
	evaluating optional subdirectories.  Bug report and initial
	patch by Luigi Panzeri <matley@member.fsf.org>.
	(battery-search-for-one-match-in-files): Leave error handling
	to the caller.


--- battery.el-1.38	2007-01-05 20:27:53.000000000 +0100
+++ battery.el	2007-01-07 08:54:36.000000000 +0100
@@ -355,19 +355,19 @@
 				   60)))
 	       hours (/ minutes 60)))
     (list (cons ?c (or (and capacity (number-to-string capacity)) "N/A"))
-	  (cons ?L (or (battery-search-for-one-match-in-files
-			(mapcar (lambda (e) (concat e "/state"))
-				(directory-files "/proc/acpi/ac_adapter/"
-						 t "\\`[^.]"))
-			"state: +\\(.*\\)$" 1)
-
+	  (cons ?L (or (ignore-errors
+			 (battery-search-for-one-match-in-files
+			  (mapcar (lambda (e) (concat e "/state"))
+				  (directory-files "/proc/acpi/ac_adapter/"
+						   t "\\`[^.]"))
+			  "state: +\\(.*\\)$" 1))
 		       "N/A"))
-	  (cons ?d (or (battery-search-for-one-match-in-files
-			(mapcar (lambda (e) (concat e "/temperature"))
-				(directory-files "/proc/acpi/thermal_zone/"
-						 t "\\`[^.]"))
-			"temperature: +\\([0-9]+\\) C$" 1)
-
+	  (cons ?d (or (ignore-errors
+			 (battery-search-for-one-match-in-files
+			  (mapcar (lambda (e) (concat e "/temperature"))
+				  (directory-files "/proc/acpi/thermal_zone/"
+						   t "\\`[^.]"))
+			  "temperature: +\\([0-9]+\\) C$" 1))
 		       "N/A"))
 	  (cons ?r (or (and rate (concat (number-to-string rate) " "
 					 rate-type)) "N/A"))
@@ -460,7 +460,7 @@
   (with-temp-buffer
     (catch 'found
       (dolist (file files)
-	(and (ignore-errors (insert-file-contents file nil nil nil 'replace))
+	(and (insert-file-contents file nil nil nil 'replace)
 	     (re-search-forward regexp nil t)
 	     (throw 'found (match-string match-num)))))))


-- 
Ralph

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2007-01-07 10:01 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-01-07 10:01 battery.el patch Ralph Schleicher
  -- strict thread matches above, loose matches on Subject: below --
2004-09-14 20:33 Ralph Schleicher
     [not found] ` <E1C7bwj-0001T6-HR@fencepost.gnu.org>
2004-09-15 21:59   ` Ralph Schleicher
2004-08-09 20:25 Ralph Schleicher

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).