bug#16775: dbus interacts poorly with lisp-level event loops

bug#16775: dbus interacts poorly with lisp-level event loops

[Daniel Colascione]

-------- Original Message --------
Subject: Re: dbus-call-method takes a minimum of 100ms per call?!
Date: Mon, 17 Feb 2014 02:56:32 -0800
From: Daniel Colascione <dancol@dancol.org>
To: Emacs developers <emacs-devel@gnu.org>

On 02/16/2014 09:15 PM, Daniel Colascione wrote:
> I think we're supposed to exit as soon as we get a dbus event and
> short-circuit the timeout, but no such event seems to get delivered,
> even for successful calls. I can dig a bit into dbusbind.c, but I'm no
> dbus expert.

dbus-call-method expects read-event to return the dbus event
immediately, but read_char in keyboard.c treats the dbus event as a
special event and runs it through special-event-map itself before
sitting and reading another event. The event waiting loop always times
out, so dbus-call-method always takes at least 100ms due to the
hard-coded 0.1 timeout parameter to read-event.

This problem is hairy: special-event-map functions can execute arbitrary
code and re-enter the dbus synchronous event loop, and there's no way to
non-locally terminate a particular read-event loop. Here's the
problematic scenario: dbus-call-method works by setting up an
asynchronous dbus call and calling read-event until the specific
asynchronous call on which it is waiting completes.

The immediate problem is that read-event never actually returns because
the dbus event is special --- but let's say we worked around that
problem by modifying special-event-map around the read-event call so
that read-event returned immediately. We'd still have a serious issue
because *other*, non-dbus special event handles can run arbitrary code
and enter an inner dbus-call-method reply-waiting loop. If the reply to
the outer synchronous dbus call arrives before the reply to the inner
synchronous dbus call, dbus-call-method-handler (which is run from
special-event-map inside read-event or, in our hypothetical partial fix,
manually from the wait loop) will dutifully put the reply on
dbus-return-values-table. But the inner event loop has no way of waking
the *outer* event loop, so when the special event handler that called
the inner dbus-call-method returns, read_char will loop around and wait
for the full timeout period before returning to the outer dbus-call-method.

If dbus had been implemented as a process type instead of a special
event source, we'd just be able to use accept-process-output in dbus-call.

bug#16775: dbus interacts poorly with lisp-level event loops

[Michael Albinus]

Daniel Colascione <dancol@dancol.org> writes:

> dbus-call-method expects read-event to return the dbus event
> immediately, but read_char in keyboard.c treats the dbus event as a
> special event and runs it through special-event-map itself before
> sitting and reading another event. The event waiting loop always times
> out, so dbus-call-method always takes at least 100ms due to the
> hard-coded 0.1 timeout parameter to read-event.

dbus-call-method does not expect the D-Bus event to be returned by
read-event. It simply calls read-event in order to trigger event
handling. The loop itself checks, whether the respective event has been
inserted into dbus-return-values-table. And when *other* but D-Bus events
do arrive in the meantime, they must be preserved in unread-command-events.

Why is it a problem to wait at least 100ms? D-Bus messages are not
expected to perform in real time (whatever this means).

> This problem is hairy: special-event-map functions can execute arbitrary
> code and re-enter the dbus synchronous event loop, and there's no way to
> non-locally terminate a particular read-event loop. Here's the
> problematic scenario: dbus-call-method works by setting up an
> asynchronous dbus call and calling read-event until the specific
> asynchronous call on which it is waiting completes.

Why do you want to terminate non-locally in dbus-call-method? If you
need asynchronous behaviour, there is dbus-call-method-asynchronously.

> The immediate problem is that read-event never actually returns because
> the dbus event is special

As said above this is not a problem but intended.

> --- but let's say we worked around that
> problem by modifying special-event-map around the read-event call so
> that read-event returned immediately. We'd still have a serious issue
> because *other*, non-dbus special event handles can run arbitrary code
> and enter an inner dbus-call-method reply-waiting loop. If the reply to
> the outer synchronous dbus call arrives before the reply to the inner
> synchronous dbus call, dbus-call-method-handler (which is run from
> special-event-map inside read-event or, in our hypothetical partial fix,
> manually from the wait loop) will dutifully put the reply on
> dbus-return-values-table. But the inner event loop has no way of waking
> the *outer* event loop, so when the special event handler that called
> the inner dbus-call-method returns, read_char will loop around and wait
> for the full timeout period before returning to the outer dbus-call-method.

I don't understand the scenario. Could you, please, give a code example?

> If dbus had been implemented as a process type instead of a special
> event source, we'd just be able to use accept-process-output in dbus-call.

There is already the discussion that such events (dbus, file
notification) should be implemented differently. I don't know whether
this shall be done as process type or as a separate queue to be checked for.

Best regards, Michael.

bug#16775: dbus interacts poorly with lisp-level event loops

[Daniel Colascione]

On 02/17/2014 05:27 AM, Michael Albinus wrote:
> Daniel Colascione <dancol@dancol.org> writes:
>
>> dbus-call-method expects read-event to return the dbus event
>> immediately, but read_char in keyboard.c treats the dbus event as a
>> special event and runs it through special-event-map itself before
>> sitting and reading another event. The event waiting loop always times
>> out, so dbus-call-method always takes at least 100ms due to the
>> hard-coded 0.1 timeout parameter to read-event.
>
> dbus-call-method does not expect the D-Bus event to be returned by
> read-event.

Then why was it calling dbus-check-event on the result? I checked in a 
hack that addresses the immediate issue.

> It simply calls read-event in order to trigger event
> handling. The loop itself checks, whether the respective event has been
> inserted into dbus-return-values-table. And when *other* but D-Bus events
> do arrive in the meantime, they must be preserved in unread-command-events.
>
> Why is it a problem to wait at least 100ms? D-Bus messages are not
> expected to perform in real time (whatever this means).

Because secrets.el was taking a whole second to load due almost entirely 
to dbus delays.

>> This problem is hairy: special-event-map functions can execute arbitrary
>> code and re-enter the dbus synchronous event loop, and there's no way to
>> non-locally terminate a particular read-event loop. Here's the
>> problematic scenario: dbus-call-method works by setting up an
>> asynchronous dbus call and calling read-event until the specific
>> asynchronous call on which it is waiting completes.
>
> Why do you want to terminate non-locally in dbus-call-method? If you
> need asynchronous behaviour, there is dbus-call-method-asynchronously.

The goal is to make dbus-call-method return as soon as the method call 
is complete.

>> The immediate problem is that read-event never actually returns because
>> the dbus event is special
>
> As said above this is not a problem but intended.

I find it hard to believe that the overall effects were intentional. 
Randomly delaying all of Emacs because something tried to make a dbus 
call is completely unacceptable.

>> --- but let's say we worked around that
>> problem by modifying special-event-map around the read-event call so
>> that read-event returned immediately. We'd still have a serious issue
>> because *other*, non-dbus special event handles can run arbitrary code
>> and enter an inner dbus-call-method reply-waiting loop. If the reply to
>> the outer synchronous dbus call arrives before the reply to the inner
>> synchronous dbus call, dbus-call-method-handler (which is run from
>> special-event-map inside read-event or, in our hypothetical partial fix,
>> manually from the wait loop) will dutifully put the reply on
>> dbus-return-values-table. But the inner event loop has no way of waking
>> the *outer* event loop, so when the special event handler that called
>> the inner dbus-call-method returns, read_char will loop around and wait
>> for the full timeout period before returning to the outer dbus-call-method.
>
> I don't understand the scenario. Could you, please, give a code example?

No, because the current code is so broken that any example I gave 
wouldn't actually demonstrate the problem I'm trying to explain above: 
I wasn't expecting the desirability of random 100ms delays to be a point 
of debate, so I jumped right to the problems one might encounter with 
various solutions. You can trigger the scenario I'm worried about by 
performing a dbus call in an X drag-and-drop handler while somebody else 
is already blocked waiting for a dbus call.

>> If dbus had been implemented as a process type instead of a special
>> event source, we'd just be able to use accept-process-output in dbus-call.
>
> There is already the discussion that such events (dbus, file
> notification) should be implemented differently. I don't know whether
> this shall be done as process type or as a separate queue to be checked for.

I have a partial patch that implements this scheme: add another argument 
early-return to Fread-event and sit-for. early-return can either be nil 
for present behavior or a function of no arguments. Plumb early-return 
all the way down to wait_reading_process_output, and have that function 
call early-return just before running xg_select. If early-return returns 
true, abort the select loop and return nil from Fread-event. This way, 
you could pass into read-event in dbus.el an early-return function that 
checked for the existence of the return value on 
dbus-return-values-table. Then, the function would return immediately on 
a dbus call being complete no matter how deeply the calls were nested. 
The mechanism could also take over the role of the current wait_for_cell 
stuff.

bug#16775: dbus interacts poorly with lisp-level event loops

[Michael Albinus]

[-- Attachment #1: Type: text/plain, Size: 6019 bytes --]

Daniel Colascione <dancol@dancol.org> writes:

> On 02/17/2014 05:27 AM, Michael Albinus wrote:
>> Daniel Colascione <dancol@dancol.org> writes:
>>
>>> dbus-call-method expects read-event to return the dbus event
>>> immediately, but read_char in keyboard.c treats the dbus event as a
>>> special event and runs it through special-event-map itself before
>>> sitting and reading another event. The event waiting loop always times
>>> out, so dbus-call-method always takes at least 100ms due to the
>>> hard-coded 0.1 timeout parameter to read-event.
>>
>> dbus-call-method does not expect the D-Bus event to be returned by
>> read-event.
>
> Then why was it calling dbus-check-event on the result? I checked in a
> hack that addresses the immediate issue.

Just for safety. Likely, I was not convinced the time I was writing
this, that it couldn't be returned by read-event. Don't remember
exactly.

Does it really hurt?

>> It simply calls read-event in order to trigger event
>> handling. The loop itself checks, whether the respective event has been
>> inserted into dbus-return-values-table. And when *other* but D-Bus events
>> do arrive in the meantime, they must be preserved in unread-command-events.
>>
>> Why is it a problem to wait at least 100ms? D-Bus messages are not
>> expected to perform in real time (whatever this means).
>
> Because secrets.el was taking a whole second to load due almost
> entirely to dbus delays.

Well, that's serious. I'll check.

However, is it just secrets.el loading, or also normal operation in
secrets.el, which are delayed drastically?

>>> This problem is hairy: special-event-map functions can execute arbitrary
>>> code and re-enter the dbus synchronous event loop, and there's no way to
>>> non-locally terminate a particular read-event loop. Here's the
>>> problematic scenario: dbus-call-method works by setting up an
>>> asynchronous dbus call and calling read-event until the specific
>>> asynchronous call on which it is waiting completes.
>>
>> Why do you want to terminate non-locally in dbus-call-method? If you
>> need asynchronous behaviour, there is dbus-call-method-asynchronously.
>
> The goal is to make dbus-call-method return as soon as the method call
> is complete.

We're speaking about 0.1sec delay. Does it really hurt? (Yes, I'll check
the secrets.el case).

>>> The immediate problem is that read-event never actually returns because
>>> the dbus event is special
>>
>> As said above this is not a problem but intended.
>
> I find it hard to believe that the overall effects were
> intentional. Randomly delaying all of Emacs because something tried to
> make a dbus call is completely unacceptable.

You misunderstand me. Intentionally?

It is not intended to delay Emacs. But there was an error with the old
implementation (Emacs was blocked sometimes during dbus-call-method);
that's why it is changed to be called asynchronously internally. By
this, you could interrupt dbus-call-method.

>>> --- but let's say we worked around that
>>> problem by modifying special-event-map around the read-event call so
>>> that read-event returned immediately. We'd still have a serious issue
>>> because *other*, non-dbus special event handles can run arbitrary code
>>> and enter an inner dbus-call-method reply-waiting loop. If the reply to
>>> the outer synchronous dbus call arrives before the reply to the inner
>>> synchronous dbus call, dbus-call-method-handler (which is run from
>>> special-event-map inside read-event or, in our hypothetical partial fix,
>>> manually from the wait loop) will dutifully put the reply on
>>> dbus-return-values-table. But the inner event loop has no way of waking
>>> the *outer* event loop, so when the special event handler that called
>>> the inner dbus-call-method returns, read_char will loop around and wait
>>> for the full timeout period before returning to the outer dbus-call-method.
>>
>> I don't understand the scenario. Could you, please, give a code example?
>
> No, because the current code is so broken that any example I gave
> wouldn't actually demonstrate the problem I'm trying to explain above:

Soory, then it will be hard to debug ...

> I wasn't expecting the desirability of random 100ms delays to be a
> point of debate, so I jumped right to the problems one might encounter
> with various solutions. You can trigger the scenario I'm worried about
> by performing a dbus call in an X drag-and-drop handler while somebody
> else is already blocked waiting for a dbus call.

I've written another small example, using file notifications (see
attached file). No problems there.

>>> If dbus had been implemented as a process type instead of a special
>>> event source, we'd just be able to use accept-process-output in dbus-call.
>>
>> There is already the discussion that such events (dbus, file
>> notification) should be implemented differently. I don't know whether
>> this shall be done as process type or as a separate queue to be checked for.
>
> I have a partial patch that implements this scheme: add another
> argument early-return to Fread-event and sit-for. early-return can
> either be nil for present behavior or a function of no
> arguments. Plumb early-return all the way down to
> wait_reading_process_output, and have that function call early-return
> just before running xg_select. If early-return returns true, abort the
> select loop and return nil from Fread-event. This way, you could pass
> into read-event in dbus.el an early-return function that checked for
> the existence of the return value on dbus-return-values-table. Then,
> the function would return immediately on a dbus call being complete no
> matter how deeply the calls were nested. The mechanism could also take
> over the role of the current wait_for_cell stuff.

Definitely nothing for 24.4, we're in feature freeze. And before we're
adding such a patch, I recommend to discuss Stefan's proposal to add
another event queue in the main loop for such kind of special events.

Best regards, Michael.


[-- Attachment #2: 123.el --]
[-- Type: application/emacs-lisp, Size: 722 bytes --]

bug#16775: dbus interacts poorly with lisp-level event loops

[Daniel Colascione]

On 02/17/2014 07:07 AM, Michael Albinus wrote:
> Daniel Colascione <dancol@dancol.org> writes:
>
>> On 02/17/2014 05:27 AM, Michael Albinus wrote:
>>> Daniel Colascione <dancol@dancol.org> writes:
>>>
>>>> dbus-call-method expects read-event to return the dbus event
>>>> immediately, but read_char in keyboard.c treats the dbus event as a
>>>> special event and runs it through special-event-map itself before
>>>> sitting and reading another event. The event waiting loop always times
>>>> out, so dbus-call-method always takes at least 100ms due to the
>>>> hard-coded 0.1 timeout parameter to read-event.
>>>
>>> dbus-call-method does not expect the D-Bus event to be returned by
>>> read-event.
>>
>> Then why was it calling dbus-check-event on the result? I checked in a
>> hack that addresses the immediate issue.
>
> Just for safety. Likely, I was not convinced the time I was writing
> this, that it couldn't be returned by read-event. Don't remember
> exactly.
>
> Does it really hurt?

It certainly makes it more difficult to determine the intent of the code.

>>> It simply calls read-event in order to trigger event
>>> handling. The loop itself checks, whether the respective event has been
>>> inserted into dbus-return-values-table. And when *other* but D-Bus events
>>> do arrive in the meantime, they must be preserved in unread-command-events.
>>>
>>> Why is it a problem to wait at least 100ms? D-Bus messages are not
>>> expected to perform in real time (whatever this means).
>>
>> Because secrets.el was taking a whole second to load due almost
>> entirely to dbus delays.
>
> Well, that's serious. I'll check.

I used time emacs -Q -batch --eval "(require 'secrets)".

> However, is it just secrets.el loading, or also normal operation in
> secrets.el, which are delayed

I don't know. Secrets has other problems that I have to fix separately. 
(By the way: dbus appears to hang if there's an error in a message spec 
and the bus disconnects from underneath us. Try (dbus-call-method 
:session "org.freedesktop.secrets" 
"/org/freedesktop/secrets/collection/login" 
"org.freedesktop.Secret.Collection" "SearchItems" '(:array (:dict-entry 
"host" ("xxxx" "xxxx")) (:dict-entry "port" "imaps"))). A signal of some 
sort pertaining to the disconnection is delivered to xd_read_message_1, 
but it drops this signal on the floor, leading dbus-call-method to loop 
until its timeout expires.

>
>>>> This problem is hairy: special-event-map functions can execute arbitrary
>>>> code and re-enter the dbus synchronous event loop, and there's no way to
>>>> non-locally terminate a particular read-event loop. Here's the
>>>> problematic scenario: dbus-call-method works by setting up an
>>>> asynchronous dbus call and calling read-event until the specific
>>>> asynchronous call on which it is waiting completes.
>>>
>>> Why do you want to terminate non-locally in dbus-call-method? If you
>>> need asynchronous behaviour, there is dbus-call-method-asynchronously.
>>
>> The goal is to make dbus-call-method return as soon as the method call
>> is complete.
>
> We're speaking about 0.1sec delay. Does it really hurt? (Yes, I'll check
> the secrets.el case).

Yes, 100 milliseconds is far about the threshold at which interactivity 
is visibly affected. It's completely unacceptable. It's worse when a 
single logical operation involves multiple dbus calls.

>>>> The immediate problem is that read-event never actually returns because
>>>> the dbus event is special
>>>
>>> As said above this is not a problem but intended.
>>
>> I find it hard to believe that the overall effects were
>> intentional. Randomly delaying all of Emacs because something tried to
>> make a dbus call is completely unacceptable.
>
> You misunderstand me. Intentionally?

No. You seem to be operating under the something interesting notion that 
it's reasonable for an interactive program to simply stop responding for 
100ms. The threshold of human perception is widely regarded to be 
somewhere in the 30ms neighborhood.

> It is not intended to delay Emacs. But there was an error with the old
> implementation (Emacs was blocked sometimes during dbus-call-method);
> that's why it is changed to be called asynchronously internally. By
> this, you could interrupt dbus-call-method.

Right. I looked up the change history, and making dbus-call-method async 
was the right choice. The event delivery, however, needs to be refined. 
There's no reason, in principle, that dbus-call-method shouldn't be able 
to return instantly on call completion.

>
>>>> --- but let's say we worked around that
>>>> problem by modifying special-event-map around the read-event call so
>>>> that read-event returned immediately. We'd still have a serious issue
>>>> because *other*, non-dbus special event handles can run arbitrary code
>>>> and enter an inner dbus-call-method reply-waiting loop. If the reply to
>>>> the outer synchronous dbus call arrives before the reply to the inner
>>>> synchronous dbus call, dbus-call-method-handler (which is run from
>>>> special-event-map inside read-event or, in our hypothetical partial fix,
>>>> manually from the wait loop) will dutifully put the reply on
>>>> dbus-return-values-table. But the inner event loop has no way of waking
>>>> the *outer* event loop, so when the special event handler that called
>>>> the inner dbus-call-method returns, read_char will loop around and wait
>>>> for the full timeout period before returning to the outer dbus-call-method.
>>>
>>> I don't understand the scenario. Could you, please, give a code example?
>>
>> No, because the current code is so broken that any example I gave
>> wouldn't actually demonstrate the problem I'm trying to explain above:
>
> Soory, then it will be hard to debug ...
>
>> I wasn't expecting the desirability of random 100ms delays to be a
>> point of debate, so I jumped right to the problems one might encounter
>> with various solutions. You can trigger the scenario I'm worried about
>> by performing a dbus call in an X drag-and-drop handler while somebody
>> else is already blocked waiting for a dbus call.
>
> I've written another small example, using file notifications (see
> attached file). No problems there.

You misunderstand me. The code I checked in "fixes" the problem for both 
the base case and the scenario I described. The code that was there 
yesterday is similarly broken --- with respect to the 100ms delay --- 
for both uses. There's nothing to debug right now.

>>>> If dbus had been implemented as a process type instead of a special
>>>> event source, we'd just be able to use accept-process-output in dbus-call.
>>>
>>> There is already the discussion that such events (dbus, file
>>> notification) should be implemented differently. I don't know whether
>>> this shall be done as process type or as a separate queue to be checked for.
>>
>> I have a partial patch that implements this scheme: add another
>> argument early-return to Fread-event and sit-for. early-return can
>> either be nil for present behavior or a function of no
>> arguments. Plumb early-return all the way down to
>> wait_reading_process_output, and have that function call early-return
>> just before running xg_select. If early-return returns true, abort the
>> select loop and return nil from Fread-event. This way, you could pass
>> into read-event in dbus.el an early-return function that checked for
>> the existence of the return value on dbus-return-values-table. Then,
>> the function would return immediately on a dbus call being complete no
>> matter how deeply the calls were nested. The mechanism could also take
>> over the role of the current wait_for_cell stuff.
>
> Definitely nothing for 24.4, we're in feature freeze. And before we're
> adding such a patch, I recommend to discuss Stefan's proposal to add
> another event queue in the main loop for such kind of special events.

I'll have to go find that thread. I'm not sure what "another event 
queue" means, exactly, or how it would help. If it's just a different 
kind of accept-process-input, one that pulls only events of a certain 
sort out of the kbd buffer, then it's still vulnerable to the reentrancy 
problem I described in my first message.

bug#16775: dbus interacts poorly with lisp-level event loops

[Michael Albinus]

Daniel Colascione <dancol@dancol.org> writes:

>>> Then why was it calling dbus-check-event on the result? I checked in a
>>> hack that addresses the immediate issue.
>>
>> Just for safety. Likely, I was not convinced the time I was writing
>> this, that it couldn't be returned by read-event. Don't remember
>> exactly.
>>
>> Does it really hurt?
>
> It certainly makes it more difficult to determine the intent of the code.

Well, so we might throw it away (as you did with your recent
patch). Thanks for this!

>>> Because secrets.el was taking a whole second to load due almost
>>> entirely to dbus delays.
>>
>> Well, that's serious. I'll check.
>
> I used time emacs -Q -batch --eval "(require 'secrets)".

Thanks. I'll have a look on it. There are other annoyances with
secrets.el on my todo, so it will be a more extensive debug
session. However, I doubt we shall touch the code during the freeze.

>> However, is it just secrets.el loading, or also normal operation in
>> secrets.el, which are delayed
>
> I don't know. Secrets has other problems that I have to fix
> separately. (By the way: dbus appears to hang if there's an error in a
> message spec and the bus disconnects from underneath us. Try
> (dbus-call-method :session "org.freedesktop.secrets"
> "/org/freedesktop/secrets/collection/login"
> "org.freedesktop.Secret.Collection" "SearchItems" '(:array
> (:dict-entry "host" ("xxxx" "xxxx")) (:dict-entry "port" "imaps"))). A
> signal of some sort pertaining to the disconnection is delivered to
> xd_read_message_1, but it drops this signal on the floor, leading
> dbus-call-method to loop until its timeout expires.

If you want to get more traces from dbusbind.c, compile Emacs with
"env MYCPPFLAGS='-DDBUS_DEBUG -Wall' make".

>> We're speaking about 0.1sec delay. Does it really hurt? (Yes, I'll check
>> the secrets.el case).
>
> Yes, 100 milliseconds is far about the threshold at which
> interactivity is visibly affected. It's completely unacceptable. It's
> worse when a single logical operation involves multiple dbus calls.
>
> No. You seem to be operating under the something interesting notion
> that it's reasonable for an interactive program to simply stop
> responding for 100ms. The threshold of human perception is widely
> regarded to be somewhere in the 30ms neighborhood.

Hmm. Problems with the dbus code were problems of being blocked, so
far. Performance hasn't been on focus (yet). I agree with you that it
shall be also tuned, but my focus seems to be different :-)

If you have (further) tuning proposals, go on!

> Right. I looked up the change history, and making dbus-call-method
> async was the right choice. The event delivery, however, needs to be
> refined. There's no reason, in principle, that dbus-call-method
> shouldn't be able to return instantly on call completion.

The code you've seen was the best compromise I could find. Of course,
one could reduce the timeouts in read-event. But OTOH, D-Bus messages
are not known to respond fast, in general. (This might change with the
upcoming kdbus, which is implemented as zero-copy).

> You misunderstand me. The code I checked in "fixes" the problem for
> both the base case and the scenario I described. The code that was
> there yesterday is similarly broken --- with respect to the 100ms
> delay ---
> for both uses. There's nothing to debug right now.

Again, I wouldn't call it "broken". It was a tradeoff between response
time of D-Bus calls, and the number of read-event calls. Of yourse, this
depends also on the underlying machine. My main development machine is 5
years old, not so fast ...

>> Definitely nothing for 24.4, we're in feature freeze. And before we're
>> adding such a patch, I recommend to discuss Stefan's proposal to add
>> another event queue in the main loop for such kind of special events.
>
> I'll have to go find that thread. I'm not sure what "another event
> queue" means, exactly, or how it would help. If it's just a different
> kind of accept-process-input, one that pulls only events of a certain
> sort out of the kbd buffer, then it's still vulnerable to the
> reentrancy problem I described in my first message.

It hasn't been discussed too much. The best reference would be
<http://thread.gmane.org/gmane.emacs.devel/169268/focus=169278>; Stefan
explains what's behind this idea.

Best regards, Michael.

bug#16775: dbus interacts poorly with lisp-level event loops

[Michael Albinus]

Hi Daniel,

given that your patch has been committed, and given that there won't be
anything else wrt your reported problem, I propose to close the
ticket. The rewrite of the event queue for dbus and file notifications
are a different thing, I believe.

OK?

Best regards, Michael.

bug#16775: dbus interacts poorly with lisp-level event loops

[Glenn Morris]

Michael Albinus wrote:

> given that your patch has been committed, and given that there won't be
> anything else wrt your reported problem, I propose to close the
> ticket. The rewrite of the event queue for dbus and file notifications
> are a different thing, I believe.

The rest is silence.

(closing after years with no further comment)