unofficial mirror of bug-gnu-emacs@gnu.org 
 help / color / mirror / code / Atom feed
* bug#18302: MSYS2 build issues
@ 2014-08-20  9:54 Karol Ostrovsky
  2014-08-20 16:26 ` Eli Zaretskii
  2014-08-21 22:32 ` Angelo Graziosi
  0 siblings, 2 replies; 23+ messages in thread
From: Karol Ostrovsky @ 2014-08-20  9:54 UTC (permalink / raw)
  To: 18302; +Cc: Chris Zheng

[-- Attachment #1: Type: text/plain, Size: 811 bytes --]

Dear Emacs maintainers,

thanks to the work of Chris Zheng and Eli Zaretskii we can build Emacs
on MSYS2 with MinGW-w64.  However, the process is not completely
painless: xpm support needs manual tweaking of CFLAGS, configure
script must be run with special flags, and make sometimes crashes for
the "emacs$(EXEEXT)" target.

I am submitting my proposed fixes for these three issues (based on the
latest trunk version of Emacs).  With this fix I can successfully
compile 64-bit Emacs using MSYS2 and MinGW-w64 with automatic xpm
support, and the process follows the same easy steps as described in
nt/INSTALL (just running ./autogen.sh, ./configure --prefix=..., and
make).  I intend to submit some additional MSYS2+MinGW-w64
documentation (file nt/INSTALL) should this patch be accepted.

Best regards,

Karol

[-- Attachment #2: configure.ac --]
[-- Type: application/octet-stream, Size: 176605 bytes --]

dnl  Autoconf script for GNU Emacs
dnl To rebuild the `configure' script from this, execute the command
dnl 	autoconf
dnl in the directory containing this script.
dnl If you changed any AC_DEFINES, also run autoheader.
dnl
dnl Copyright (C) 1994-1996, 1999-2014 Free Software Foundation, Inc.
dnl
dnl  This file is part of GNU Emacs.
dnl
dnl  GNU Emacs is free software: you can redistribute it and/or modify
dnl  it under the terms of the GNU General Public License as published by
dnl  the Free Software Foundation, either version 3 of the License, or
dnl  (at your option) any later version.
dnl
dnl  GNU Emacs is distributed in the hope that it will be useful,
dnl  but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
dnl  GNU General Public License for more details.
dnl
dnl  You should have received a copy of the GNU General Public License
dnl  along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.

AC_PREREQ(2.65)
dnl Note this is parsed by (at least) make-dist and lisp/cedet/ede/emacs.el.
AC_INIT(GNU Emacs, 24.4.50, bug-gnu-emacs@gnu.org)

dnl Set emacs_config_options to the options of 'configure', quoted for the shell,
dnl and then quoted again for a C string.  Separate options with spaces.
dnl Add some environment variables, if they were passed via the environment
dnl rather than on the command-line.
emacs_config_options=
optsep=
dnl This is the documented way to record the args passed to configure,
dnl rather than $ac_configure_args.
for opt in ${1+"$@"} CFLAGS CPPFLAGS LDFLAGS; do
  case $opt in
    -n | --no-create | --no-recursion)
      continue ;;
    CFLAGS | CPPFLAGS | LDFLAGS)
      eval 'test "${'$opt'+set}" = set' || continue
      case " $*" in
	*" $opt="*) continue ;;
      esac
      eval opt=$opt=\$$opt ;;
  esac

  emacs_shell_specials=$IFS\''"#$&()*;<>?@<:@\\`{|~'
  case $opt in
    *[["$emacs_shell_specials"]]*)
      case $opt in
	*\'*)
	  emacs_quote_apostrophes="s/'/'\\\\''/g"
	  opt=`AS_ECHO(["$opt"]) | sed "$emacs_quote_apostrophes"` ;;
      esac
      opt="'$opt'"
      case $opt in
	*[['"\\']]*)
	  emacs_quote_for_c='s/[["\\]]/\\&/g; $!s/$/\\n\\/'
	  opt=`AS_ECHO(["$opt"]) | sed "$emacs_quote_for_c"` ;;
      esac ;;
  esac
  AS_VAR_APPEND([emacs_config_options], ["$optsep$opt"])
  optsep=' '
done

AC_CONFIG_HEADERS(src/config.h:src/config.in)
AC_CONFIG_SRCDIR(src/lisp.h)
AC_CONFIG_AUX_DIR(build-aux)
dnl automake 1.13 and later understand this, making -I m4 unnecessary.
dnl With older versions this is a no-op.
AC_CONFIG_MACRO_DIR(m4)

xcsdkdir=
AC_CHECK_PROGS(XCRUN, [xcrun])
if test -n "$XCRUN"; then
  if test -z "$MAKE"; then
    dnl Call the variable MAKE_PROG, not MAKE, to avoid confusion with
    dnl the usual MAKE variable that 'make' itself uses.
    AC_CHECK_PROG([MAKE_PROG], [make], [yes])
    if test -z "$MAKE_PROG"; then
      MAKE="$XCRUN MAKE"
      export MAKE
      xcsdkdir=`$XCRUN --show-sdk-path 2>/dev/null`
    fi
  fi
fi

dnl GNU Make is required, so don't test for its individual features.
am_cv_make_support_nested_variables=yes
AC_DEFUN([AC_PROG_MAKE_SET],
  [SET_MAKE=
   AC_SUBST([SET_MAKE])])

dnl Check for GNU Make and possibly set MAKE before running AM_INIT_AUTOMAKE.
[emacs_check_gnu_make ()
{
  emacs_makeout=`($1 --version) 2>/dev/null` &&
  case $emacs_makeout in
    'GNU Make '3.8[1-9]* | 'GNU Make '3.9[0-9]* | \
    'GNU Make '3.[1-9][0-9][0-9]* | 'GNU Make '[4-9]* | 'GNU Make '[1-9][0-9]* )
       ac_path_MAKE_found=:;;
  esac
}]
AC_CACHE_CHECK([for GNU Make], [ac_cv_path_MAKE],
  [ac_path_MAKE_found=false
   if test -n "$MAKE"; then
     emacs_check_gnu_make "$MAKE"
     ac_cv_path_MAKE=$MAKE
   else
     emacs_tried_make=false
     emacs_tried_gmake=false
     emacs_tried_gnumake=false
     AC_PATH_PROGS_FEATURE_CHECK([MAKE], [make gmake gnumake],
       [[emacs_check_gnu_make "$ac_path_MAKE"
	 if $ac_path_MAKE_found; then
	   # Use the fully-qualified program name only if the basename
	   # would not resolve to it.
	   if eval \$emacs_tried_$ac_prog; then
	     ac_cv_path_MAKE=$ac_path_MAKE
	   else
	     ac_cv_path_MAKE=$ac_prog
	   fi
	 fi
	 eval emacs_tried_$ac_prog=:]])
   fi])
$ac_path_MAKE_found || {
AC_MSG_ERROR([[Building Emacs requires GNU Make, at least version 3.81.
If you have it installed under another name, configure with 'MAKE=...'.
For example, run '$0 MAKE=gnu-make'.]])
}
MAKE=$ac_cv_path_MAKE

dnl Fairly arbitrary, older versions might work too.
AM_INIT_AUTOMAKE(1.11)

dnl Canonicalize the configuration name.
AC_CANONICAL_HOST
canonical=$host
configuration=${host_alias-${build_alias-$host}}

dnl We get MINGW64 with MSYS2.
case $canonical in
 *-mingw*)
  . $srcdir/nt/mingw-cfg.site

  case $srcdir in
    /* | ?:*)
      # srcdir is an absolute path.  In this case, force the format
      # "/c/foo/bar", to simplify later conversions to native Windows
      # format ("c:/foo/bar").
      srcdir=`cd "${srcdir}" && pwd -W`
      srcdir="/${srcdir:0:1}${srcdir:2}"
      ;;
  esac;;
esac

dnl Support for --program-prefix, --program-suffix and
dnl --program-transform-name options
AC_ARG_PROGRAM

dnl It is important that variables on the RHS not be expanded here,
dnl hence the single quotes.  This is per the GNU coding standards, see
dnl (autoconf) Installation Directory Variables
dnl See also epaths.h below.
lispdir='${datadir}/emacs/${version}/lisp'
standardlisppath='${lispdir}'
locallisppath='${datadir}/emacs/${version}/site-lisp:'\
'${datadir}/emacs/site-lisp'
lisppath='${locallisppath}:${standardlisppath}'
etcdir='${datadir}/emacs/${version}/etc'
archlibdir='${libexecdir}/emacs/${version}/${configuration}'
etcdocdir='${datadir}/emacs/${version}/etc'
gamedir='${localstatedir}/games/emacs'

dnl Special option to disable the most of other options.
AC_ARG_WITH(all,
[AS_HELP_STRING([--without-all],
		[omit almost all features and build
		small executable with minimal dependencies])],
  [with_features=$withval],
  [with_features=yes])

dnl OPTION_DEFAULT_OFF(NAME, HELP-STRING)
dnl Create a new --with option that defaults to being disabled.
dnl NAME is the base name of the option.  The shell variable with_NAME
dnl   will be set to either the user's value (if the option is
dnl   specified; 'yes' for a plain --with-NAME) or to 'no' (if the
dnl   option is not specified).  Note that the shell variable name is
dnl   constructed as autoconf does, by replacing non-alphanumeric
dnl   characters with "_".
dnl HELP-STRING is the help text for the option.
AC_DEFUN([OPTION_DEFAULT_OFF], [dnl
  AC_ARG_WITH([$1],[AS_HELP_STRING([--with-$1],[$2])],[],[dnl
    m4_bpatsubst([with_$1], [[^0-9a-z]], [_])=no])dnl
])dnl

dnl OPTION_DEFAULT_ON(NAME, HELP-STRING)
dnl Create a new --with option that defaults to $with_features.
dnl NAME is the base name of the option.  The shell variable with_NAME
dnl   will be set either to 'no' (for a plain --without-NAME) or to
dnl   'yes' (if the option is not specified).  Note that the shell
dnl   variable name is constructed as autoconf does, by replacing
dnl   non-alphanumeric characters with "_".
dnl HELP-STRING is the help text for the option.
AC_DEFUN([OPTION_DEFAULT_ON], [dnl
  AC_ARG_WITH([$1],[AS_HELP_STRING([--without-$1],[$2])],[],[dnl
   m4_bpatsubst([with_$1], [[^0-9a-z]], [_])=$with_features])dnl
])dnl

OPTION_DEFAULT_ON([pop],[don't support POP mail retrieval with movemail])
if test "$with_pop" = yes; then
   AC_DEFINE(MAIL_USE_POP)
fi
AH_TEMPLATE(MAIL_USE_POP, [Define to support POP mail retrieval.])dnl

OPTION_DEFAULT_OFF([kerberos],[support Kerberos-authenticated POP])
if test "$with_kerberos" != no; then
   AC_DEFINE(KERBEROS)
fi
AH_TEMPLATE(KERBEROS,
	    [Define to support Kerberos-authenticated POP mail retrieval.])dnl

OPTION_DEFAULT_OFF([kerberos5],[support Kerberos version 5 authenticated POP])
if test "${with_kerberos5}" != no; then
  if test "${with_kerberos}" = no; then
    with_kerberos=yes
    AC_DEFINE(KERBEROS)
  fi
  AC_DEFINE(KERBEROS5, 1, [Define to use Kerberos 5 instead of Kerberos 4.])
fi

OPTION_DEFAULT_OFF([hesiod],[support Hesiod to get the POP server host])
dnl FIXME hesiod support may not be present, so it seems like an error
dnl to define, or at least use, this unconditionally.
if test "$with_hesiod" != no; then
  AC_DEFINE(HESIOD, 1, [Define to support using a Hesiod database to find the POP server.])
fi

OPTION_DEFAULT_OFF([mmdf],[support MMDF mailboxes])
if test "$with_mmdf" != no; then
   AC_DEFINE(MAIL_USE_MMDF, 1, [Define to support MMDF mailboxes in movemail.])
fi

OPTION_DEFAULT_OFF([mail-unlink],[unlink, rather than empty, mail spool after reading])
if test "$with_mail_unlink" != no; then
   AC_DEFINE(MAIL_UNLINK_SPOOL, 1, [Define to unlink, rather than empty, mail spool after reading.])
fi

AC_ARG_WITH([mailhost],[AS_HELP_STRING([--with-mailhost=HOSTNAME],
    [string giving default POP mail host])],
    AC_DEFINE_UNQUOTED(MAILHOST, ["$withval"], [String giving fallback POP mail host.]))

AC_ARG_WITH([sound],[AS_HELP_STRING([--with-sound=VALUE],
  [compile with sound support (VALUE one of: yes, alsa, oss, bsd-ossaudio, no;
default yes).  Only for GNU/Linux, FreeBSD, NetBSD, MinGW.])],
  [ case "${withval}" in
      yes|no|alsa|oss|bsd-ossaudio) val=$withval ;;
      *) AC_MSG_ERROR([`--with-sound=$withval' is invalid;
this option's value should be `yes', `no', `alsa', `oss', or `bsd-ossaudio'.])
      ;;
    esac
    with_sound=$val
  ],
  [with_sound=$with_features])

dnl FIXME currently it is not the last.
dnl This should be the last --with option, because --with-x is
dnl added later on when we find the file name of X, and it's best to
dnl keep them together visually.
AC_ARG_WITH([x-toolkit],[AS_HELP_STRING([--with-x-toolkit=KIT],
 [use an X toolkit (KIT one of: yes or gtk, gtk2, gtk3, lucid or athena, motif, no)])],
[	  case "${withval}" in
	    y | ye | yes )	val=gtk ;;
	    n | no )		val=no  ;;
	    l | lu | luc | luci | lucid )	val=lucid ;;
	    a | at | ath | athe | athen | athena )	val=athena ;;
	    m | mo | mot | moti | motif )	val=motif ;;
	    g | gt | gtk  )	val=gtk ;;
	    gtk2  )	val=gtk2 ;;
	    gtk3  )	val=gtk3 ;;
	    * )
AC_MSG_ERROR([`--with-x-toolkit=$withval' is invalid;
this option's value should be `yes', `no', `lucid', `athena', `motif', `gtk',
`gtk2' or `gtk3'.  `yes' and `gtk' are synonyms.
`athena' and `lucid' are synonyms.])
	    ;;
	  esac
	  with_x_toolkit=$val
])

OPTION_DEFAULT_OFF([wide-int], [prefer wide Emacs integers (typically 62-bit)])
if test "$with_wide_int" = yes; then
  AC_DEFINE([WIDE_EMACS_INT], 1, [Use long long for EMACS_INT if available.])
fi

dnl _ON results in a '--without' option in the --help output, so
dnl the help text should refer to "don't compile", etc.
with_xpm_set=${with_xpm+set}
OPTION_DEFAULT_ON([xpm],[don't compile with XPM image support])
OPTION_DEFAULT_ON([jpeg],[don't compile with JPEG image support])
OPTION_DEFAULT_ON([tiff],[don't compile with TIFF image support])
OPTION_DEFAULT_ON([gif],[don't compile with GIF image support])
OPTION_DEFAULT_ON([png],[don't compile with PNG image support])
OPTION_DEFAULT_ON([rsvg],[don't compile with SVG image support])
OPTION_DEFAULT_ON([xml2],[don't compile with XML parsing support])
OPTION_DEFAULT_ON([imagemagick],[don't compile with ImageMagick image support])

OPTION_DEFAULT_ON([xft],[don't use XFT for anti aliased fonts])
OPTION_DEFAULT_ON([libotf],[don't use libotf for OpenType font support])
OPTION_DEFAULT_ON([m17n-flt],[don't use m17n-flt for text shaping])

OPTION_DEFAULT_ON([toolkit-scroll-bars],[don't use Motif or Xaw3d scroll bars])
OPTION_DEFAULT_ON([xaw3d],[don't use Xaw3d])
OPTION_DEFAULT_ON([xim],[don't use X11 XIM])
OPTION_DEFAULT_OFF([ns],[use NeXTstep (Cocoa or GNUstep) windowing system])
OPTION_DEFAULT_OFF([w32], [use native MS Windows GUI in a Cygwin build])

OPTION_DEFAULT_ON([gpm],[don't use -lgpm for mouse support on a GNU/Linux console])
OPTION_DEFAULT_ON([dbus],[don't compile with D-Bus support])
OPTION_DEFAULT_ON([gconf],[don't compile with GConf support])
OPTION_DEFAULT_ON([gsettings],[don't compile with GSettings support])
OPTION_DEFAULT_ON([selinux],[don't compile with SELinux support])
OPTION_DEFAULT_ON([gnutls],[don't use -lgnutls for SSL/TLS support])
OPTION_DEFAULT_ON([zlib],[don't compile with zlib decompression support])

AC_ARG_WITH([file-notification],[AS_HELP_STRING([--with-file-notification=LIB],
 [use a file notification library (LIB one of: yes, gfile, inotify, w32, no)])],
 [ case "${withval}" in
    y | ye | yes )	val=yes ;;
    n | no )		val=no  ;;
    g | gf | gfi | gfil | gfile )	val=gfile ;;
    i | in | ino | inot | inoti | inotif | inotify )	val=inotify ;;
    w | w3 | w32 )	val=w32 ;;
    * ) AC_MSG_ERROR([`--with-file-notification=$withval' is invalid;
this option's value should be `yes', `no', `gfile', `inotify' or `w32'.
`yes' is a synonym for `w32' on MS-Windows, for `no' on Nextstep,
otherwise for the first of `gfile' or `inotify' that is usable.])
    ;;
   esac
   with_file_notification=$val
 ],
 [with_file_notification=$with_features])

## For the times when you want to build Emacs but don't have
## a suitable makeinfo, and can live without the manuals.
dnl http://lists.gnu.org/archive/html/emacs-devel/2008-04/msg01844.html
OPTION_DEFAULT_ON([makeinfo],[don't require makeinfo for building manuals])

## This might be a 'configure' arg.
AC_SUBST([ACLOCAL_PATH])

## Makefile.in needs the cache file name.
AC_SUBST(cache_file)

## This is an option because I do not know if all info/man support
## compressed files, nor how to test if they do so.
OPTION_DEFAULT_ON([compress-install],
  [don't compress some files (.el, .info, etc.) when installing.  Equivalent to:
make GZIP_PROG= install])

AC_ARG_WITH(gameuser,dnl
[AS_HELP_STRING([--with-gameuser=USER],[user for shared game score files])])
test "X${with_gameuser}" != X && test "${with_gameuser}" != yes \
  && gameuser="${with_gameuser}"
test "X$gameuser" = X && gameuser=games

AC_ARG_WITH([gnustep-conf],dnl
[AS_HELP_STRING([--with-gnustep-conf=FILENAME],
   [name of GNUstep.conf; default $GNUSTEP_CONFIG_FILE, or /etc/GNUstep/GNUstep.conf])])
test "X${with_gnustep_conf}" != X && test "${with_gnustep_conf}" != yes && \
  GNUSTEP_CONFIG_FILE="${with_gnustep_conf}"
test "X$GNUSTEP_CONFIG_FILE" = "X" && \
     GNUSTEP_CONFIG_FILE=/etc/GNUstep/GNUstep.conf

AC_ARG_ENABLE(ns-self-contained,
[AS_HELP_STRING([--disable-ns-self-contained],
                [disable self contained build under NeXTstep])],
   EN_NS_SELF_CONTAINED=$enableval,
   EN_NS_SELF_CONTAINED=yes)

AC_ARG_ENABLE(locallisppath,
[AS_HELP_STRING([--enable-locallisppath=PATH],
                [directories Emacs should search for lisp files specific
		 to this site])],
if test "${enableval}" = "no"; then
  locallisppath=
elif test "${enableval}" != "yes"; then
  locallisppath=${enableval}
fi)

AC_ARG_ENABLE(checking,
[AS_HELP_STRING([--enable-checking@<:@=LIST@:>@],
		[enable expensive run-time checks.  With LIST,
		 enable only specific categories of checks.
		 Categories are: all,yes,no.
		 Flags are: stringbytes, stringoverrun, stringfreelist,
		 xmallocoverrun, conslist, glyphs])],
[ac_checking_flags="${enableval}"],[])
IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS="$IFS,"
for check in $ac_checking_flags
do
	case $check in
	# these set all the flags to specific states
	yes)		ac_enable_checking=1 ;;
	no)		ac_enable_checking= ;
			ac_gc_check_stringbytes= ;
	                ac_gc_check_string_overrun= ;
	                ac_gc_check_string_free_list= ;
	                ac_xmalloc_overrun= ;
	                ac_gc_check_cons_list= ;
			ac_glyphs_debug= ;;
	all)		ac_enable_checking=1 ;
			ac_gc_check_stringbytes=1 ;
	                ac_gc_check_string_overrun=1 ;
	                ac_gc_check_string_free_list=1 ;
	                ac_xmalloc_overrun=1 ;
	                ac_gc_check_cons_list=1 ;
			ac_glyphs_debug=1 ;;
	# these enable particular checks
	stringbytes) 	ac_gc_check_stringbytes=1 ;;
	stringoverrun) 	ac_gc_check_string_overrun=1 ;;
	stringfreelist) ac_gc_check_string_free_list=1 ;;
	xmallocoverrun)	ac_xmalloc_overrun=1 ;;
	conslist)	ac_gc_check_cons_list=1 ;;
	glyphs)		ac_glyphs_debug=1 ;;
	*)	AC_MSG_ERROR(unknown check category $check) ;;
	esac
done
IFS="$ac_save_IFS"

if test x$ac_enable_checking != x ; then
  AC_DEFINE(ENABLE_CHECKING, 1,
[Define to 1 if expensive run-time data type and consistency checks are enabled.])
fi
if test x$ac_gc_check_stringbytes != x ; then
  AC_DEFINE(GC_CHECK_STRING_BYTES, 1,
[Define this temporarily to hunt a bug.  If defined, the size of
   strings is redundantly recorded in sdata structures so that it can
   be compared to the sizes recorded in Lisp strings.])
fi
if test x$ac_gc_check_string_overrun != x ; then
  AC_DEFINE(GC_CHECK_STRING_OVERRUN, 1,
[Define this to check for short string overrun.])
fi
if test x$ac_gc_check_string_free_list != x ; then
  AC_DEFINE(GC_CHECK_STRING_FREE_LIST, 1,
[Define this to check the string free list.])
fi
if test x$ac_xmalloc_overrun != x ; then
  AC_DEFINE(XMALLOC_OVERRUN_CHECK, 1,
[Define this to check for malloc buffer overrun.])
fi
if test x$ac_gc_check_cons_list != x ; then
  AC_DEFINE(GC_CHECK_CONS_LIST, 1,
[Define this to check for errors in cons list.])
fi
if test x$ac_glyphs_debug != x ; then
  AC_DEFINE(GLYPH_DEBUG, 1,
[Define this to enable glyphs debugging code.])
fi

AC_ARG_ENABLE(check-lisp-object-type,
[AS_HELP_STRING([--enable-check-lisp-object-type],
                [enable compile time checks for the Lisp_Object data type.
		This is useful for development for catching certain types of bugs.])],
if test "${enableval}" != "no"; then
   AC_DEFINE(CHECK_LISP_OBJECT_TYPE, 1,
   [Define this to enable compile time checks for the Lisp_Object data type.])
fi)


dnl The name of this option is unfortunate.  It predates, and has no
dnl relation to, the "sampling-based elisp profiler" added in 24.3.
dnl Actually, it stops it working.
dnl http://lists.gnu.org/archive/html/emacs-devel/2012-11/msg00393.html
AC_ARG_ENABLE(profiling,
[AS_HELP_STRING([--enable-profiling],
		[build emacs with low-level, gprof profiling support.
                Mainly useful for debugging Emacs itself.  May not work on
                all platforms.  Stops profiler.el working.])],
[ac_enable_profiling="${enableval}"],[])
if test x$ac_enable_profiling != x ; then
   PROFILING_CFLAGS="-DPROFILING=1 -pg"
else
   PROFILING_CFLAGS=
fi
AC_SUBST(PROFILING_CFLAGS)

AC_ARG_ENABLE(autodepend,
[AS_HELP_STRING([--enable-autodepend],
		[automatically generate dependencies to .h-files.
 		 Requires gcc, enabled if found.])],
[ac_enable_autodepend="${enableval}"],[ac_enable_autodepend=yes])

AC_ARG_ENABLE(gtk-deprecation-warnings,
[AS_HELP_STRING([--enable-gtk-deprecation-warnings],
		[Show Gtk+/Gdk deprecation warnings for Gtk+ >= 3.0])],
[ac_enable_gtk_deprecation_warnings="${enableval}"],[])

dnl This used to use changequote, but, apart from `changequote is evil'
dnl per the autoconf manual, we can speed up autoconf somewhat by quoting
dnl the great gob of text.  Thus it's not processed for possible expansion.
dnl Just make sure the brackets remain balanced.
dnl
dnl Since Emacs can't find matching pairs of quotes, boundaries are
dnl indicated by comments.
dnl quotation begins
[

### If you add support for a new configuration, add code to this
### switch statement to recognize your configuration name and select
### the appropriate opsys.

### As far as handling version numbers on operating systems is
### concerned, make sure things will fail in a fixable way.  If
### /etc/MACHINES doesn't say anything about version numbers, be
### prepared to handle anything reasonably.  If version numbers
### matter, be sure /etc/MACHINES says something about it.

opsys='' unported=no
case "${canonical}" in

  ## GNU/Linux and similar ports
  *-*-linux* )
    opsys=gnu-linux
  ;;

  ## FreeBSD ports
  *-*-freebsd* )
    opsys=freebsd
  ;;

  ## DragonFly ports
  *-*-dragonfly* )
    opsys=dragonfly
  ;;

  ## FreeBSD kernel + glibc based userland
  *-*-kfreebsd*gnu* )
    opsys=gnu-kfreebsd
  ;;

  ## NetBSD ports
  *-*-netbsd* )
    opsys=netbsd
  ;;

  ## OpenBSD ports
  *-*-openbsd* | *-*-mirbsd* )
    opsys=openbsd
  ;;

  ## Apple Darwin / Mac OS X
  *-apple-darwin* )
    case "${canonical}" in
      i[3456]86-* )  ;;
      powerpc-* )    ;;
      x86_64-* )     ;;
      * )            unported=yes ;;
    esac
    opsys=darwin
    ## Use fink packages if available.
    ## FIXME find a better way to do this: http://debbugs.gnu.org/11507
##    if test -d /sw/include && test -d /sw/lib; then
##      GCC_TEST_OPTIONS="-I/sw/include -L/sw/lib"
##      NON_GCC_TEST_OPTIONS=${GCC_TEST_OPTIONS}
##    fi
  ;;

  ## Cygwin ports
  *-*-cygwin )
    opsys=cygwin
  ;;

  ## HP 9000 series 700 and 800, running HP/UX
  hppa*-hp-hpux10.2* )
    opsys=hpux10-20
  ;;
  hppa*-hp-hpux1[1-9]* )
    opsys=hpux11
    CFLAGS="-D_INCLUDE__STDC_A1_SOURCE $CFLAGS"
  ;;

  ## IBM machines
  rs6000-ibm-aix4.[23]* )
    opsys=aix4-2
  ;;
  powerpc-ibm-aix4.[23]*  )
    opsys=aix4-2
  ;;
  rs6000-ibm-aix[56]* )
    opsys=aix4-2
  ;;
  powerpc-ibm-aix[5-9]* | powerpc-ibm-aix[1-9][0-9]* )
    opsys=aix4-2
  ;;

  ## Silicon Graphics machines
  ## Iris 4D
  mips-sgi-irix6.5 )
    opsys=irix6-5
    # Without defining _LANGUAGE_C, things get masked out in the headers
    # so that, for instance, grepping for `free' in stdlib.h fails and
    # AC_HEADER_STD_C fails.   (MIPSPro 7.2.1.2m compilers, Irix 6.5.3m).
    NON_GCC_TEST_OPTIONS="-D_LANGUAGE_C"
  ;;

  ## Suns
  *-sun-solaris* \
    | i[3456]86-*-solaris2* | i[3456]86-*-sunos5* \
    | x86_64-*-solaris2*    | x86_64-*-sunos5*)
    case "${canonical}" in
      i[3456]86-*-* )   ;;
      amd64-*-*|x86_64-*-*) ;;
      sparc* )		;;
      * )		unported=yes ;;
    esac
    case "${canonical}" in
      *-sunos5.[1-9][0-9]* | *-solaris2.[1-9][0-9]* )
		opsys=sol2-10
		emacs_check_sunpro_c=yes
		;;
      *-sunos5.[1-5]* | *-solaris2.[1-5]* ) unported=yes ;;
      ## Note that Emacs 23.1's NEWS said the following would be dropped.
      *-sunos5.6* | *-solaris2.6* )
		opsys=sol2-6
		RANLIB="ar -ts"
		;;
      ## 5.7 EOL Aug 2008, 5.8 EOL Mar 2012.
      *-sunos5.[7-9]* | *-solaris2.[7-9]* )
		opsys=sol2-6
		emacs_check_sunpro_c=yes
		;;
    esac
    ## Watch out for a compiler that we know will not work.
    case "${canonical}" in
     *-solaris* | *-sunos5* )
		if [ "x$CC" = x/usr/ucb/cc ]; then
		  ## /usr/ucb/cc doesn't work;
		  ## we should find some other compiler that does work.
		  unset CC
		fi
		;;
      *) ;;
    esac
  ;;

  ## Intel 386 machines where we don't care about the manufacturer.
  i[3456]86-*-* )
    case "${canonical}" in
      *-darwin* )               opsys=darwin ;;
      *-mingw* )
		opsys=mingw
		# MinGW overrides and adds some system headers in nt/inc.
		GCC_TEST_OPTIONS="-I $srcdir/nt/inc"
		;;
      *-sysv4.2uw* )	  	opsys=unixware ;;
      *-sysv5uw* )	  	opsys=unixware ;;
      *-sysv5OpenUNIX* )  	opsys=unixware ;;
      ## Otherwise, we'll fall through to the generic opsys code at the bottom.
    esac
  ;;

  # MinGW64
  x86_64-*-* )
    case "${canonical}" in
      *-mingw* )
		opsys=mingw
		# MinGW overrides and adds some system headers in nt/inc.
		GCC_TEST_OPTIONS="-I $srcdir/nt/inc"
		;;
      ## Otherwise, we'll fall through to the generic opsys code at the bottom.
    esac
  ;;

  * )
    unported=yes
  ;;
esac

### If the code above didn't choose an operating system, just choose
### an operating system based on the configuration name.  You really
### only want to use this when you have no idea what the right
### operating system is; if you know what operating systems a machine
### runs, it's cleaner to make it explicit in the case statement
### above.
if test x"${opsys}" = x; then
  case "${canonical}" in
    *-gnu* )				opsys=gnu ;;
    * )
      unported=yes
    ;;
  esac
fi

]
dnl quotation ends

if test $unported = yes; then
  AC_MSG_ERROR([Emacs does not support `${canonical}' systems.
If you think it should, please send a report to ${PACKAGE_BUGREPORT}.
Check `etc/MACHINES' for recognized configuration names.])
fi


#### Choose a compiler.

dnl Don't bother to test for C89.
AC_DEFUN([_AC_PROG_CC_C89], [$2])

dnl Sets GCC=yes if using gcc.
AC_PROG_CC([gcc cc cl clang "$XCRUN gcc" "$XCRUN clang"])
if test -n "$XCRUN"; then
  AC_CHECK_PROGS(AR, [ar "$XCRUN ar"])
  test -n "$AR" && export AR
fi

dnl Emacs needs C99 or later.
gl_PROG_CC_C99

AM_PROG_CC_C_O

if test x$GCC = xyes; then
  test "x$GCC_TEST_OPTIONS" != x && CC="$CC $GCC_TEST_OPTIONS"
else
  test "x$NON_GCC_TEST_OPTIONS" != x && CC="$CC $NON_GCC_TEST_OPTIONS"
fi

dnl This is used in lib/Makefile.am to use nt/gnulib.mk, the
dnl alternative to lib/gnulib.mk, so as to avoid generating header files
dnl that clash with MinGW.
AM_CONDITIONAL([BUILDING_FOR_WINDOWSNT], [test "x$opsys" = "xmingw"])

# Avoid gnulib's tests for -lcrypto, so that there's no static dependency on it.
AC_DEFUN([gl_CRYPTO_CHECK])
# Avoid gnulib's tests for HAVE_WORKING_O_NOATIME and HAVE_WORKING_O_NOFOLLOW,
# as we don't use them.
AC_DEFUN([gl_FCNTL_O_FLAGS])

# Initialize gnulib right after choosing the compiler.
dnl Amongst other things, this sets AR and ARFLAGS.
gl_EARLY

if test "$ac_test_CFLAGS" != set; then
  # It's helpful to have C macros available to GDB, so prefer -g3 to -g
  # if -g3 works and the user does not specify CFLAGS.
  # This test must follow gl_EARLY; otherwise AC_LINK_IFELSE complains.
  case $CFLAGS in
    '-g')
      emacs_g3_CFLAGS='-g3';;
    '-g -O2')
      emacs_g3_CFLAGS='-g3 -O2';;
    *)
      emacs_g3_CFLAGS='';;
  esac
  if test -n "$emacs_g3_CFLAGS"; then
    emacs_save_CFLAGS=$CFLAGS
    CFLAGS=$emacs_g3_CFLAGS
    AC_CACHE_CHECK([whether $CC accepts $emacs_g3_CFLAGS],
      [emacs_cv_prog_cc_g3],
      [AC_LINK_IFELSE([AC_LANG_PROGRAM()],
	 [emacs_cv_prog_cc_g3=yes],
	 [emacs_cv_prog_cc_g3=no])])
    if test $emacs_cv_prog_cc_g3 != yes; then
      CFLAGS=$emacs_save_CFLAGS
    fi
    if test $opsys = mingw; then
      CFLAGS="$CFLAGS -gdwarf-2"
    fi
  fi

  case $CFLAGS in
    *-O*) ;;
    *)
      # No optimization flag was inferred for this non-GCC compiler.
      # Try -O.  This is needed for xlc on AIX; see Bug#14258.
      emacs_save_CFLAGS=$CFLAGS
      test -z "$CFLAGS" || CFLAGS="$CFLAGS "
      CFLAGS=${CFLAGS}-O
      AC_CACHE_CHECK([whether $CC accepts -O],
        [emacs_cv_prog_cc_o],
	[AC_LINK_IFELSE([AC_LANG_PROGRAM()],
	   [emacs_cv_prog_cc_o=yes],
	   [emacs_cv_prog_cc_o=no])])
      if test $emacs_cv_prog_cc_o != yes; then
	CFLAGS=$emacs_save_CFLAGS
      fi ;;
  esac
fi

AC_ARG_ENABLE([gcc-warnings],
  [AS_HELP_STRING([--enable-gcc-warnings],
                  [turn on lots of GCC warnings/errors. This is intended for
		   developers, and may generate false alarms when used
		   with older or non-GNU development tools.])],
  [case $enableval in
     yes|no) ;;
     *)      AC_MSG_ERROR([bad value $enableval for gcc-warnings option]) ;;
   esac
   gl_gcc_warnings=$enableval],
  [gl_gcc_warnings=no]
)

# clang is unduly picky about some things.
AC_CACHE_CHECK([whether the compiler is clang], [emacs_cv_clang],
  [AC_COMPILE_IFELSE(
     [AC_LANG_PROGRAM([[
	  #ifndef __clang__
	    error "not clang";
	  #endif
        ]])],
     [emacs_cv_clang=yes],
     [emacs_cv_clang=no])])

# When compiling with GCC, prefer -isystem to -I when including system
# include files, to avoid generating useless diagnostics for the files.
if test "$gl_gcc_warnings" != yes; then
  isystem='-I'
  if test "$emacs_cv_clang" = yes
  then
     # Turn off some warnings if supported.
     gl_WARN_ADD([-Wno-switch])
     gl_WARN_ADD([-Wno-tautological-constant-out-of-range-compare])
     gl_WARN_ADD([-Wno-pointer-sign])
  fi
else
  isystem='-isystem '

  # This, $nw, is the list of warnings we disable.
  nw=

  case $with_x_toolkit in
    lucid | athena | motif)
       # Old toolkits mishandle 'const'.
       nw="$nw -Wwrite-strings"
       ;;
    *)
       gl_WARN_ADD([-Werror], [WERROR_CFLAGS])
       ;;
  esac
  AC_SUBST([WERROR_CFLAGS])

  nw="$nw -Wsystem-headers"         # Don't let system headers trigger warnings
  nw="$nw -Woverlength-strings"     # Not a problem these days
  nw="$nw -Wlogical-op"             # any use of fwrite provokes this
  nw="$nw -Wformat-nonliteral"      # we do this a lot
  nw="$nw -Wvla"                    # warnings in gettext.h
  nw="$nw -Wnested-externs"         # use of XARGMATCH/verify_function__
  nw="$nw -Wswitch-default"         # Too many warnings for now
  nw="$nw -Winline"                 # OK to ignore 'inline'
  nw="$nw -Wjump-misses-init"       # We sometimes safely jump over init.
  nw="$nw -Wstrict-overflow"        # OK to optimize assuming that
                                    # signed overflow has undefined behavior
  nw="$nw -Wsync-nand"              # irrelevant here, and provokes ObjC warning
  nw="$nw -Wunsafe-loop-optimizations" # OK to suppress unsafe optimizations
  nw="$nw -Wbad-function-cast"      # These casts are no worse than others.

  # Emacs doesn't care about shadowing; see
  # <http://lists.gnu.org/archive/html/emacs-diffs/2011-11/msg00265.html>.
  nw="$nw -Wshadow"

  # Emacs's use of alloca inhibits protecting the stack.
  nw="$nw -Wstack-protector"

  # The following line should be removable at some point.
  nw="$nw -Wsuggest-attribute=pure"

  # This part is merely for shortening the command line,
  # since -Wno-FOO needs to be added below regardless.
  nw="$nw -Wmissing-field-initializers"
  nw="$nw -Wswitch"
  nw="$nw -Wtype-limits"
  nw="$nw -Wunused-parameter"

  if test $emacs_cv_clang = yes; then
    nw="$nw -Wcast-align"
  fi

  gl_MANYWARN_ALL_GCC([ws])
  gl_MANYWARN_COMPLEMENT([ws], [$ws], [$nw])
  for w in $ws; do
    gl_WARN_ADD([$w])
  done
  gl_WARN_ADD([-Wredundant-decls])     # Prefer this, as we don't use Bison.
  gl_WARN_ADD([-Wno-missing-field-initializers]) # We need this one
  gl_WARN_ADD([-Wno-sign-compare])     # Too many warnings for now
  gl_WARN_ADD([-Wno-type-limits])      # Too many warnings for now
  gl_WARN_ADD([-Wno-switch])           # Too many warnings for now
  gl_WARN_ADD([-Wno-unused-parameter]) # Too many warnings for now
  gl_WARN_ADD([-Wno-format-nonliteral])

  # In spite of excluding -Wlogical-op above, it is enabled, as of
  # gcc 4.5.0 20090517.
  gl_WARN_ADD([-Wno-logical-op])

  # More things that clang is unduly picky about.
  if test $emacs_cv_clang = yes; then
    gl_WARN_ADD([-Wno-format-extra-args])
    gl_WARN_ADD([-Wno-tautological-constant-out-of-range-compare])
    gl_WARN_ADD([-Wno-unused-command-line-argument])
    gl_WARN_ADD([-Wno-unused-value])
  fi

  AC_DEFINE([lint], [1], [Define to 1 if the compiler is checking for lint.])
  AH_VERBATIM([FORTIFY_SOURCE],
  [/* Enable compile-time and run-time bounds-checking, and some warnings,
      without upsetting glibc 2.15+. */
   #if !defined _FORTIFY_SOURCE && defined __OPTIMIZE__ && __OPTIMIZE__
   # define _FORTIFY_SOURCE 2
   #endif
  ])
  AC_DEFINE([GNULIB_PORTCHECK], [1], [enable some gnulib portability checks])

  # We use a slightly smaller set of warning options for lib/.
  # Remove the following and save the result in GNULIB_WARN_CFLAGS.
  nw=
  nw="$nw -Wunused-macros"

  gl_MANYWARN_COMPLEMENT([GNULIB_WARN_CFLAGS], [$WARN_CFLAGS], [$nw])
  AC_SUBST([GNULIB_WARN_CFLAGS])
fi

edit_cflags="
  s,///*,/,g
  s/^/ /
  s/ -I/ $isystem/g
  s/^ //
"

AC_ARG_ENABLE(link-time-optimization,
[AS_HELP_STRING([--enable-link-time-optimization],
                [build emacs with link-time optimization.
		 This requires GCC 4.5.0 or later, or clang.
		 (Note that clang support is experimental - see INSTALL.)
		 It also makes Emacs harder to debug, and when we tried it
		 with GCC 4.9.0 x86-64 it made Emacs slower, so it's not
		 recommended for typical use.])],
if test "${enableval}" != "no"; then
   ac_lto_supported=no
   if test $emacs_cv_clang = yes; then
      AC_MSG_CHECKING([whether link-time optimization is supported by clang])
      GOLD_PLUGIN=`$CC -print-file-name=LLVMgold.so 2>/dev/null`
      if test -x "$GOLD_PLUGIN"; then
	 LTO="-flto"
      fi
   elif test x$GCC = xyes; then
      AC_MSG_CHECKING([whether link-time optimization is supported by gcc])
      CPUS=`getconf _NPROCESSORS_ONLN 2>/dev/null`
      if test x$CPUS != x; then
	 LTO="-flto=$CPUS"
      else
	 LTO="-flto"
      fi
   else
      AC_MSG_ERROR([Link-time optimization is not supported with your compiler.])
   fi
   if test -z "$LTO"; then
      ac_lto_supported=no
   else
      old_CFLAGS=$CFLAGS
      CFLAGS="$CFLAGS $LTO"
      AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[]])],
         [ac_lto_supported=yes], [ac_lto_supported=no])
         CFLAGS="$old_CFLAGS"
   fi
   AC_MSG_RESULT([$ac_lto_supported])
   if test "$ac_lto_supported" = "yes"; then
      CFLAGS="$CFLAGS $LTO"
      if test x$emacs_cv_clang = xyes; then
	 AC_MSG_WARN([Please read INSTALL before using link-time optimization with clang])
	 # WARNING: 'ar --plugin ...' doesn't work without
	 # command, so plugin name is appended to ARFLAGS.
	 ARFLAGS="cru --plugin $GOLD_PLUGIN"
	 RANLIB="$RANLIB --plugin $GOLD_PLUGIN"
      else
        dnl The following is needed for GCC 4.9.0.  The GCC 4.9.0 release notes
        dnl suggest that instead of -ffat-lto-objects we should use gcc-ar and
        dnl gcc-ranlib in place of ar and ranlib, but gcc-ar makes /usr/bin/ar
        dnl dump core on Fedora 20, so play it safe for now.
        gl_COMPILER_OPTION_IF([-ffat-lto-objects],
          [CFLAGS="$CFLAGS -ffat-lto-objects"])
      fi
   fi
fi)

dnl Some other nice autoconf tests.
dnl These are commented out, since gl_EARLY and/or Autoconf already does them.
dnl AC_PROG_INSTALL
dnl AC_PROG_MKDIR_P
dnl if test "x$RANLIB" = x; then
dnl   AC_PROG_RANLIB
dnl fi


dnl Sadly, AC_PROG_LN_S is too restrictive.  It also tests whether links
dnl can be made to directories.  This is not relevant for our usage, and
dnl excludes some cases that work fine for us.  Eg MS Windows or files
dnl hosted on AFS, both examples where simple links work, but links to
dnl directories fail.  We use a cut-down version instead.
dnl AC_PROG_LN_S

AC_MSG_CHECKING([whether ln -s works for files in the same directory])
rm -f conf$$ conf$$.file

LN_S_FILEONLY='cp -p'

dnl On MinGW, ensure we will call the MSYS /bin/ln.exe, not some
dnl random program in the current directory.
if (echo >conf$$.file) 2>/dev/null; then
  if ln -s conf$$.file conf$$ 2>/dev/null; then
    if test "$opsys" = "mingw"; then
      LN_S_FILEONLY='/bin/ln -s'
    else
      LN_S_FILEONLY='ln -s'
    fi
  elif ln conf$$.file conf$$ 2>/dev/null; then
    if test "$opsys" = "mingw"; then
      LN_S_FILEONLY=/bin/ln
    else
      LN_S_FILEONLY=ln
    fi
  fi
fi

rm -f conf$$ conf$$.file

if test "$LN_S_FILEONLY" = "ln -s"; then
   AC_MSG_RESULT([yes])
else
   AC_MSG_RESULT([no, using $LN_S_FILEONLY])
fi

AC_SUBST(LN_S_FILEONLY)


dnl AC_PROG_LN_S sets LN_S to 'cp -pR' for MinGW, on the premise that 'ln'
dnl doesn't support links to directories, as in "ln file dir".  But that
dnl use is non-portable, and OTOH MinGW wants to use hard links for Emacs
dnl executables at "make install" time.
dnl See http://lists.gnu.org/archive/html/emacs-devel/2013-04/msg00475.html
dnl for more details.
if test "$opsys" = "mingw"; then
  LN_S="/bin/ln"
fi

dnl On some Debian versions, "install-info" prints irritating messages
dnl "This is not dpkg install-info anymore, but GNU install-info"
dnl if called via an absolute file name.
dnl Use the entirely-identical-but-quieter ginstall-info instead if present.
dnl Sadly some people may have an old ginstall-info installed on
dnl non-Debian systems, so we can't use this.
dnl AC_PATH_PROGS(INSTALL_INFO, [ginstall-info install-info], :,
dnl   $PATH$PATH_SEPARATOR/usr/sbin$PATH_SEPARATOR/sbin)

AC_PATH_PROG(INSTALL_INFO, install-info, :,
  $PATH$PATH_SEPARATOR/usr/sbin$PATH_SEPARATOR/sbin)
dnl Don't use GZIP, which is used by gzip for additional parameters.
AC_PATH_PROG(GZIP_PROG, gzip)

test $with_compress_install != yes && test -n "$GZIP_PROG" && \
   GZIP_PROG=" # $GZIP_PROG # (disabled by configure --without-compress-install)"

if test $opsys = gnu-linux; then
  AC_PATH_PROG(PAXCTL, paxctl,,
    [$PATH$PATH_SEPARATOR/sbin$PATH_SEPARATOR/usr/sbin])
  if test "X$PAXCTL" != X; then
    AC_MSG_CHECKING([whether binaries have a PT_PAX_FLAGS header])
    AC_LINK_IFELSE([AC_LANG_PROGRAM([], [])],
      [if $PAXCTL -v conftest$EXEEXT >/dev/null 2>&1; then AC_MSG_RESULT(yes)
      else AC_MSG_RESULT(no); PAXCTL=""; fi])
  fi

  if test "${SETFATTR+set}" != set; then
    AC_CACHE_CHECK([for setfattr],
      [emacs_cv_prog_setfattr],
      [touch conftest.tmp
       if (setfattr -n user.pax.flags conftest.tmp) >/dev/null 2>&1; then
	 emacs_cv_prog_setfattr=yes
       else
	 emacs_cv_prog_setfattr=no
       fi])
    if test "$emacs_cv_prog_setfattr" = yes; then
      SETFATTR=setfattr
    else
      SETFATTR=
    fi
    rm -f conftest.tmp
    AC_SUBST([SETFATTR])
  fi
fi

## Need makeinfo >= 4.7 (?) to build the manuals.
AC_PATH_PROG(MAKEINFO, makeinfo, no)
dnl By this stage, configure has already checked for egrep and set EGREP,
dnl or exited with an error if no egrep was found.
if test "$MAKEINFO" != "no"; then
  case `
    $MAKEINFO --version 2> /dev/null |
    $EGREP 'texinfo[[^0-9]]*([[1-4]][[0-9]]+|[[5-9]]|4\.[[7-9]]|4\.[[1-6]][[0-9]]+)'
  ` in
    '') MAKEINFO=no;;
  esac
fi

## Makeinfo is unusual.  For a released Emacs, the manuals are
## pre-built, and not deleted by the normal clean rules.  makeinfo is
## therefore in the category of "special tools" not normally required, which
## configure does not have to check for (eg autoconf itself).
## In a repository checkout on the other hand, the manuals are not included.
## So makeinfo is a requirement to build from the repository, and configure
## should test for it as it does for any other build requirement.
## We use the presence of $srcdir/info/emacs to distinguish a release,
## with pre-built manuals, from a repository checkout.
HAVE_MAKEINFO=yes

if test "$MAKEINFO" = "no"; then
  MAKEINFO=makeinfo
  if test "x${with_makeinfo}" = "xno"; then
    HAVE_MAKEINFO=no
  elif test ! -e "$srcdir/info/emacs" && test ! -e "$srcdir/info/emacs.info"; then
    AC_MSG_ERROR( [You do not seem to have makeinfo >= 4.7, and your
source tree does not seem to have pre-built manuals in the `info' directory.
Either install a suitable version of makeinfo, or re-run configure
with the `--without-makeinfo' option to build without the manuals.] )
  fi
fi
AC_SUBST(HAVE_MAKEINFO)

if test $opsys = mingw; then
   DOCMISC_W32=efaq-w32
else
   DOCMISC_W32=
fi
AC_SUBST(DOCMISC_W32)

dnl Add our options to ac_link now, after it is set up.

if test x$GCC = xyes; then
  test "x$GCC_LINK_TEST_OPTIONS" != x && \
    ac_link="$ac_link $GCC_LINK_TEST_OPTIONS"
else
  test "x$NON_GCC_LINK_TEST_OPTIONS" != x && \
    ac_link="$ac_link $NON_GCC_LINK_TEST_OPTIONS"
fi

dnl We need -znocombreloc if we're using a relatively recent GNU ld.
dnl If we can link with the flag, it shouldn't do any harm anyhow.
dnl (Don't use `-z nocombreloc' as -z takes no arg on Irix.)
dnl Treat GCC specially since it just gives a non-fatal `unrecognized option'
dnl if not built to support GNU ld.

dnl For a long time, -znocombreloc was added to LDFLAGS rather than
dnl LD_SWITCH_SYSTEM_TEMACS.  That is:
dnl * inappropriate, as LDFLAGS is a user option but this is essential.
dnl   Eg "make LDFLAGS=... all" could run into problems,
dnl   http://bugs.debian.org/684788
dnl * unnecessary, since temacs is the only thing that actually needs it.
dnl   Indeed this is where it was originally, prior to:
dnl   http://lists.gnu.org/archive/html/emacs-pretest-bug/2004-03/msg00170.html
late_LDFLAGS="$LDFLAGS"
if test x$GCC = xyes; then
  LDFLAGS_NOCOMBRELOC="-Wl,-znocombreloc"
else
  LDFLAGS_NOCOMBRELOC="-znocombreloc"
fi

LDFLAGS="$LDFLAGS $LDFLAGS_NOCOMBRELOC"

AC_MSG_CHECKING([for -znocombreloc])
AC_LINK_IFELSE([AC_LANG_PROGRAM([], [])],
  [AC_MSG_RESULT(yes)],
  LDFLAGS_NOCOMBRELOC=
  [AC_MSG_RESULT(no)])

LDFLAGS="$late_LDFLAGS"

AC_CACHE_CHECK([whether addresses are sanitized],
  [emacs_cv_sanitize_address],
  [AC_COMPILE_IFELSE(
     [AC_LANG_PROGRAM(
	[[#ifndef __has_feature
	  #define __has_feature(f) 0
	  #endif
	  #if defined __SANITIZE_ADDRESS__ || __has_feature (address_sanitizer)
	  #else
	   error "Addresses are not sanitized.";
	  #endif
	]])],
     [emacs_cv_sanitize_address=yes],
     [emacs_cv_sanitize_address=no])])

dnl The function dump-emacs will not be defined and temacs will do
dnl (load "loadup") automatically unless told otherwise.
test "x$CANNOT_DUMP" = "x" && CANNOT_DUMP=no
case "$opsys" in
  your-opsys-here) CANNOT_DUMP=yes ;;
esac

if test "$CANNOT_DUMP" = "yes"; then
  AC_DEFINE(CANNOT_DUMP, 1, [Define if Emacs cannot be dumped on your system.])
elif test "$emacs_cv_sanitize_address" = yes; then
  AC_MSG_WARN([[Addresses are sanitized; suggest CANNOT_DUMP=yes]])
fi

AC_SUBST(CANNOT_DUMP)


UNEXEC_OBJ=unexelf.o
case "$opsys" in
  # MSDOS uses unexcoff.o
  aix4-2)
   UNEXEC_OBJ=unexaix.o
   ;;
  cygwin)
   UNEXEC_OBJ=unexcw.o
   ;;
  darwin)
   UNEXEC_OBJ=unexmacosx.o
   ;;
  hpux10-20 | hpux11)
   UNEXEC_OBJ=unexhp9k800.o
   ;;
  mingw)
   UNEXEC_OBJ=unexw32.o
   ;;
  sol2-10)
   # Use the Solaris dldump() function, called from unexsol.c, to dump
   # emacs, instead of the generic ELF dump code found in unexelf.c.
   # The resulting binary has a complete symbol table, and is better
   # for debugging and other observability tools (debuggers, pstack, etc).
   #
   # If you encounter a problem using dldump(), please consider sending
   # a message to the OpenSolaris tools-linking mailing list:
   #      http://mail.opensolaris.org/mailman/listinfo/tools-linking
   #
   # It is likely that dldump() works with older Solaris too, but this has
   # not been tested, so for now this change is for Solaris 10 or newer.
   UNEXEC_OBJ=unexsol.o
   ;;
esac

LD_SWITCH_SYSTEM=
case "$opsys" in
  freebsd|dragonfly)
   ## Let `ld' find image libs and similar things in /usr/local/lib.
   ## The system compiler, GCC, has apparently been modified to not
   ## look there, contrary to what a stock GCC would do.
### It's not our place to do this.  See bug#10313#17.
###   LD_SWITCH_SYSTEM=-L/usr/local/lib
      :
   ;;

  gnu-linux)
   ## cpp test was "ifdef __mips__", but presumably this is equivalent...
   case $host_cpu in mips*) LD_SWITCH_SYSTEM="-G 0";; esac
   ;;

  netbsd)
### It's not our place to do this.  See bug#10313#17.
###   LD_SWITCH_SYSTEM="-Wl,-rpath,/usr/pkg/lib -L/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/local/lib"
      :
   ;;

  openbsd)
   ## Han Boetes <han@boetes.org> says this is necessary,
   ## otherwise Emacs dumps core on elf systems.
   LD_SWITCH_SYSTEM="-Z"
   ;;
esac
AC_SUBST(LD_SWITCH_SYSTEM)

ac_link="$ac_link $LD_SWITCH_SYSTEM"

## This setting of LD_SWITCH_SYSTEM references LD_SWITCH_X_SITE_RPATH,
## which has not been defined yet.  When this was handled with cpp,
## it was expanded to null when configure sourced the s/*.h file.
## Thus LD_SWITCH_SYSTEM had different values in configure and the Makefiles.
## FIXME it would be cleaner to put this in LD_SWITCH_SYSTEM_TEMACS
## (or somesuch), but because it is supposed to go at the _front_
## of LD_SWITCH_SYSTEM, we cannot do that in exactly the same way.
## Compare with the gnu-linux case below, which added to the end
## of LD_SWITCH_SYSTEM, and so can instead go at the front of
## LD_SWITCH_SYSTEM_TEMACS.
case "$opsys" in
  netbsd|openbsd)
   LD_SWITCH_SYSTEM="\$(LD_SWITCH_X_SITE_RPATH) $LD_SWITCH_SYSTEM" ;;
esac


C_SWITCH_MACHINE=
case $canonical in
 alpha*)
  AC_CHECK_DECL([__ELF__])
  if test "$ac_cv_have_decl___ELF__" = "yes"; then
    ## With ELF, make sure that all common symbols get allocated to in the
    ## data section.  Otherwise, the dump of temacs may miss variables in
    ## the shared library that have been initialized.  For example, with
    ## GNU libc, __malloc_initialized would normally be resolved to the
    ## shared library's .bss section, which is fatal.
    if test "x$GCC" = "xyes"; then
      C_SWITCH_MACHINE="-fno-common"
    else
      AC_MSG_ERROR([Non-GCC compilers are not supported.])
    fi
  else
      dnl This was the unexalpha.c case.  Removed in 24.1, 2010-07-24,
      dnl albeit under the mistaken assumption that said file
      dnl was no longer used.
      AC_MSG_ERROR([Non-ELF systems are not supported since Emacs 24.1.])
  fi
  ;;
esac
AC_SUBST(C_SWITCH_MACHINE)

AC_SUBST(UNEXEC_OBJ)

C_SWITCH_SYSTEM=
## Some programs in src produce warnings saying certain subprograms
## are too complex and need a MAXMEM value greater than 2000 for
## additional optimization.  --nils@exp-math.uni-essen.de
test "$opsys" = "aix4.2" && test "x$GCC" != "xyes" && \
  C_SWITCH_SYSTEM="-ma -qmaxmem=4000"
if test "$opsys" = "mingw"; then
  C_SWITCH_SYSTEM="-mtune=generic"
fi
## gnu-linux might need -D_BSD_SOURCE on old libc5 systems.
## It is redundant in glibc2, since we define _GNU_SOURCE.
AC_SUBST(C_SWITCH_SYSTEM)


LIBS_SYSTEM=
case "$opsys" in
  ## IBM's X11R5 uses -lIM and -liconv in AIX 3.2.2.
  aix4-2) LIBS_SYSTEM="-lrts -lIM -liconv" ;;

  freebsd|dragonfly) LIBS_SYSTEM="-lutil" ;;

  hpux*) LIBS_SYSTEM="-l:libdld.sl" ;;

  sol2*) LIBS_SYSTEM="-lsocket -lnsl" ;;

  ## Motif needs -lgen.
  unixware) LIBS_SYSTEM="-lsocket -lnsl -lelf -lgen" ;;
esac

AC_SUBST(LIBS_SYSTEM)

### Make sure subsequent tests use flags consistent with the build flags.

if test x"${OVERRIDE_CPPFLAGS}" != x; then
  CPPFLAGS="${OVERRIDE_CPPFLAGS}"
else
  CPPFLAGS="$C_SWITCH_SYSTEM $C_SWITCH_MACHINE $CPPFLAGS"
fi

# Suppress obsolescent Autoconf test for size_t; Emacs assumes C99 or better.
AC_DEFUN([AC_TYPE_SIZE_T])
# Likewise for obsolescent test for uid_t, gid_t; Emacs assumes them.
AC_DEFUN([AC_TYPE_UID_T])

# sqrt and other floating-point functions such as fmod and frexp
# are found in -lm on many systems.
OLD_LIBS=$LIBS
AC_SEARCH_LIBS([sqrt], [m])
if test "X$LIBS" = "X$OLD_LIBS"; then
  LIB_MATH=
else
  LIB_MATH=$ac_cv_search_sqrt
fi
LIBS=$OLD_LIBS

dnl Current possibilities handled by sed (aix4-2 -> aix,
dnl gnu-linux -> gnu/linux, etc.):
dnl gnu, gnu/linux, gnu/kfreebsd, aix, cygwin, darwin, hpux, irix.
dnl And special cases: berkeley-unix, usg-unix-v, ms-dos, windows-nt.
SYSTEM_TYPE=`echo $opsys | sed -e 's/[[0-9]].*//' -e 's|-|/|'`

case $opsys in
  cygwin )
    LIB_MATH=
    ;;
  darwin )
    ## Adding -lm confuses the dynamic linker, so omit it.
    LIB_MATH=
    ;;
  freebsd | dragonfly )
    SYSTEM_TYPE=berkeley-unix
    ;;
  gnu-linux | gnu-kfreebsd )
    ;;
  hpux10-20 | hpux11 )
    ;;
  mingw )
    LIB_MATH=
    SYSTEM_TYPE=windows-nt
    ;;
  dnl NB this may be adjusted below.
  netbsd | openbsd )
    SYSTEM_TYPE=berkeley-unix
    ;;

  sol2* | unixware )
    SYSTEM_TYPE=usg-unix-v
    ;;

esac

AC_SUBST(LIB_MATH)
AC_DEFINE_UNQUOTED(SYSTEM_TYPE, "$SYSTEM_TYPE",
  [The type of system you are compiling for; sets `system-type'.])


pre_PKG_CONFIG_CFLAGS=$CFLAGS
pre_PKG_CONFIG_LIBS=$LIBS

PKG_PROG_PKG_CONFIG(0.9.0)

dnl EMACS_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4)
dnl acts like PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4,
dnl HAVE_GSTUFF=yes, HAVE_GSTUFF=no) -- see pkg-config man page --
dnl except that it postprocesses CFLAGS as needed for --enable-gcc-warnings.
dnl EMACS_CHECK_MODULES accepts optional 3rd and 4th arguments that
dnl can take the place of the default HAVE_GSTUFF=yes and HAVE_GSTUFF=no
dnl actions.
AC_DEFUN([EMACS_CHECK_MODULES],
  [PKG_CHECK_MODULES([$1], [$2],
     [$1_CFLAGS=`AS_ECHO(["$$1_CFLAGS"]) | sed -e "$edit_cflags"`
      m4_default([$3], [HAVE_$1=yes])],
     [m4_default([$4], [HAVE_$1=no])])])

HAVE_SOUND=no
if test "${with_sound}" != "no"; then
  # Sound support for GNU/Linux, the free BSDs, and MinGW.
  AC_CHECK_HEADERS([machine/soundcard.h sys/soundcard.h soundcard.h],
    have_sound_header=yes, [], [
    #ifdef __MINGW32__
    #define WIN32_LEAN_AND_MEAN
    #include <windows.h>
    #endif
    ])
  test "${with_sound}" = "oss" && test "${have_sound_header}" != "yes" && \
    AC_MSG_ERROR([OSS sound support requested but not found.])

  if test "${with_sound}" = "bsd-ossaudio" || test "${with_sound}" = "yes"; then
    # Emulation library used on NetBSD.
    AC_CHECK_LIB(ossaudio, _oss_ioctl, LIBSOUND=-lossaudio, LIBSOUND=)
    test "${with_sound}" = "bsd-ossaudio" && test -z "$LIBSOUND" && \
      AC_MSG_ERROR([bsd-ossaudio sound support requested but not found.])
    dnl FIXME?  If we did find ossaudio, should we set with_sound=bsd-ossaudio?
    dnl Traditionally, we go on to check for alsa too.  Does that make sense?
  fi
  AC_SUBST(LIBSOUND)

  if test "${with_sound}" = "alsa" || test "${with_sound}" = "yes"; then
    ALSA_REQUIRED=1.0.0
    ALSA_MODULES="alsa >= $ALSA_REQUIRED"
    EMACS_CHECK_MODULES([ALSA], [$ALSA_MODULES])
    if test $HAVE_ALSA = yes; then
      SAVE_CFLAGS="$CFLAGS"
      SAVE_LIBS="$LIBS"
      CFLAGS="$ALSA_CFLAGS $CFLAGS"
      LIBS="$ALSA_LIBS $LIBS"
      AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <asoundlib.h>]], [[snd_lib_error_set_handler (0);]])],
                      emacs_alsa_normal=yes,
  	            emacs_alsa_normal=no)
      if test "$emacs_alsa_normal" != yes; then
        AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <alsa/asoundlib.h>]],
                       [[snd_lib_error_set_handler (0);]])],
                       emacs_alsa_subdir=yes,
  	             emacs_alsa_subdir=no)
        if test "$emacs_alsa_subdir" != yes; then
          AC_MSG_ERROR([pkg-config found alsa, but it does not compile.  See config.log for error messages.])
        fi
        ALSA_CFLAGS="$ALSA_CFLAGS -DALSA_SUBDIR_INCLUDE"
      fi

      CFLAGS="$SAVE_CFLAGS"
      LIBS="$SAVE_LIBS"
      LIBSOUND="$LIBSOUND $ALSA_LIBS"
      CFLAGS_SOUND="$CFLAGS_SOUND $ALSA_CFLAGS"
      AC_DEFINE(HAVE_ALSA, 1, [Define to 1 if ALSA is available.])
    elif test "${with_sound}" = "alsa"; then
      AC_MSG_ERROR([ALSA sound support requested but not found.])
    fi
  fi                            dnl with_sound = alsa|yes

  dnl Define HAVE_SOUND if we have sound support.  We know it works and
  dnl compiles only on the specified platforms.  For others, it
  dnl probably doesn't make sense to try.
  dnl FIXME So surely we should bypass this whole section if not using
  dnl one of these platforms?
  if test x$have_sound_header = xyes || test $HAVE_ALSA = yes; then
     case "$opsys" in
       dnl defined __FreeBSD__ || defined __NetBSD__ || defined __linux__
       dnl Adjust the --with-sound help text if you change this.
       gnu-linux|freebsd|netbsd|mingw)
         AC_DEFINE(HAVE_SOUND, 1, [Define to 1 if you have sound support.])
         HAVE_SOUND=yes
         ;;
     esac
  fi

  AC_SUBST(CFLAGS_SOUND)
fi

dnl checks for header files
AC_CHECK_HEADERS_ONCE(
  sys/systeminfo.h
  sys/sysinfo.h
  coff.h pty.h
  sys/resource.h
  sys/utsname.h pwd.h utmp.h util.h)

AC_MSG_CHECKING(if personality LINUX32 can be set)
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <sys/personality.h>]], [[personality (PER_LINUX32)]])],
               emacs_cv_personality_linux32=yes,
	       emacs_cv_personality_linux32=no)
AC_MSG_RESULT($emacs_cv_personality_linux32)

if test $emacs_cv_personality_linux32 = yes; then
  AC_DEFINE(HAVE_PERSONALITY_LINUX32, 1,
            [Define to 1 if personality LINUX32 can be set.])
fi

if test "$ac_cv_header_sys_sysinfo_h" = yes; then
  AC_MSG_CHECKING([if Linux sysinfo may be used])
  AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <sys/sysinfo.h>]],
                                     [[struct sysinfo si; sysinfo (&si)]])],
    emacs_cv_linux_sysinfo=yes, emacs_cv_linux_sysinfo=no)
  AC_MSG_RESULT($emacs_cv_linux_sysinfo)
  if test $emacs_cv_linux_sysinfo = yes; then
    AC_DEFINE([HAVE_LINUX_SYSINFO], 1, [Define to 1 if you have Linux sysinfo function.])
    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <sys/sysinfo.h>]],
                                       [[struct sysinfo si; return si.mem_unit]])],
      AC_DEFINE(LINUX_SYSINFO_UNIT, 1,
                [Define to 1 if Linux sysinfo sizes are in multiples of mem_unit bytes.]))
  fi
fi

dnl On Solaris 8 there's a compilation warning for term.h because
dnl it doesn't define `bool'.
AC_CHECK_HEADERS(term.h, , , -)
AC_HEADER_TIME
AC_CHECK_DECLS([sys_siglist], [], [], [[#include <signal.h>
			              ]])
if test $ac_cv_have_decl_sys_siglist != yes; then
  # For Tru64, at least:
  AC_CHECK_DECLS([__sys_siglist], [], [], [[#include <signal.h>
			                  ]])
fi
AC_HEADER_SYS_WAIT

AC_CHECK_HEADERS_ONCE(sys/socket.h)
AC_CHECK_HEADERS(net/if.h, , , [AC_INCLUDES_DEFAULT
#if HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif])
AC_CHECK_HEADERS(ifaddrs.h, , , [AC_INCLUDES_DEFAULT
#if HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif])
AC_CHECK_HEADERS(net/if_dl.h, , , [AC_INCLUDES_DEFAULT
#if HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif])

dnl checks for structure members
AC_CHECK_MEMBERS([struct ifreq.ifr_flags, struct ifreq.ifr_hwaddr,
		  struct ifreq.ifr_netmask, struct ifreq.ifr_broadaddr,
		  struct ifreq.ifr_addr,
		  struct ifreq.ifr_addr.sa_len], , ,
		 [AC_INCLUDES_DEFAULT
#if HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#if HAVE_NET_IF_H
#include <net/if.h>
#endif])

dnl Check for endianness.
dnl AC_C_BIGENDIAN is done by gnulib.

dnl check for Make feature

DEPFLAGS=
MKDEPDIR=":"
deps_frag=deps.mk
dnl check if we have GCC and autodepend is on.
if test "$GCC" = yes && test "$ac_enable_autodepend" = yes; then
   AC_MSG_CHECKING([whether gcc understands -MMD -MF])
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -MMD -MF deps.d -MP"
   AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[]])], , ac_enable_autodepend=no)
   CFLAGS="$SAVE_CFLAGS"
   test -f deps.d || ac_enable_autodepend=no
   rm -rf deps.d
   AC_MSG_RESULT([$ac_enable_autodepend])
   if test $ac_enable_autodepend = yes; then
      DEPFLAGS='-MMD -MF ${DEPDIR}/$*.d -MP'
      ## MKDIR_P is documented (see AC_PROG_MKDIR_P) to be parallel-safe.
      MKDEPDIR='${MKDIR_P} ${DEPDIR}'
      deps_frag=autodeps.mk
   fi
fi
lwlib_deps_frag=$srcdir/lwlib/$deps_frag
oldxmenu_deps_frag=$srcdir/oldXMenu/$deps_frag
deps_frag=$srcdir/src/$deps_frag
AC_SUBST(MKDEPDIR)
AC_SUBST(DEPFLAGS)
AC_SUBST_FILE(deps_frag)
AC_SUBST_FILE(lwlib_deps_frag)
AC_SUBST_FILE(oldxmenu_deps_frag)

lisp_frag=$srcdir/src/lisp.mk
AC_SUBST_FILE(lisp_frag)


dnl checks for operating system services
AC_SYS_LONG_FILE_NAMES

#### Choose a window system.

## We leave window_system equal to none if
## we end up building without one.  Any new window system should
## set window_system to an appropriate value and add objects to
## window-system-specific substs.

window_system=none
AC_PATH_X
if test "$no_x" != yes; then
  window_system=x11
fi

LD_SWITCH_X_SITE_RPATH=
if test "${x_libraries}" != NONE; then
  if test -n "${x_libraries}"; then
    LD_SWITCH_X_SITE=-L`echo ${x_libraries} | sed -e "s/:/ -L/g"`
    LD_SWITCH_X_SITE_RPATH=-Wl,-rpath,`echo ${x_libraries} | sed -e "s/:/ -Wl,-rpath,/g"`
  fi
  x_default_search_path=""
  x_search_path=${x_libraries}
  if test -z "${x_search_path}"; then
    x_search_path=/usr/lib
  fi
  for x_library in `echo ${x_search_path}: | \
		    sed -e "s/:/ /g" -e p -e "s:/lib[[^ /]]* :/share :g"`; do
    x_search_path="\
${x_library}/X11/%L/%T/%N%C%S:\
${x_library}/X11/%l/%T/%N%C%S:\
${x_library}/X11/%T/%N%C%S:\
${x_library}/X11/%L/%T/%N%S:\
${x_library}/X11/%l/%T/%N%S:\
${x_library}/X11/%T/%N%S"
    if test x"${x_default_search_path}" = x; then
      x_default_search_path=${x_search_path}
    else
      x_default_search_path="${x_search_path}:${x_default_search_path}"
    fi
  done
fi
AC_SUBST(LD_SWITCH_X_SITE_RPATH)

if test "${x_includes}" != NONE && test -n "${x_includes}"; then
  C_SWITCH_X_SITE="$isystem"`echo ${x_includes} | sed -e "s/:/ $isystem/g"`
fi

if test x"${x_includes}" = x; then
  bitmapdir=/usr/include/X11/bitmaps
else
  # accumulate include directories that have X11 bitmap subdirectories
  bmd_acc="dummyval"
  for bmd in `echo ${x_includes} | sed -e "s/:/ /g"`; do
    if test -d "${bmd}/X11/bitmaps"; then
      bmd_acc="${bmd_acc}:${bmd}/X11/bitmaps"
    fi
    if test -d "${bmd}/bitmaps"; then
      bmd_acc="${bmd_acc}:${bmd}/bitmaps"
    fi
  done
  if test ${bmd_acc} != "dummyval"; then
    bitmapdir=`echo ${bmd_acc} | sed -e "s/^dummyval://"`
  fi
fi

HAVE_NS=no
NS_IMPL_COCOA=no
NS_IMPL_GNUSTEP=no
tmp_CPPFLAGS="$CPPFLAGS"
tmp_CFLAGS="$CFLAGS"
CPPFLAGS="$CPPFLAGS -x objective-c"
CFLAGS="$CFLAGS -x objective-c"
GNU_OBJC_CFLAGS=
LIBS_GNUSTEP=
if test "${with_ns}" != no; then
  if test "${opsys}" = darwin; then
     NS_IMPL_COCOA=yes
     ns_appdir=`pwd`/nextstep/Emacs.app
     ns_appbindir=${ns_appdir}/Contents/MacOS
     ns_appresdir=${ns_appdir}/Contents/Resources
     ns_appsrc=Cocoa/Emacs.base
  elif test -f $GNUSTEP_CONFIG_FILE; then
     NS_IMPL_GNUSTEP=yes
     ns_appdir=`pwd`/nextstep/Emacs.app
     ns_appbindir=${ns_appdir}
     ns_appresdir=${ns_appdir}/Resources
     ns_appsrc=GNUstep/Emacs.base
     dnl FIXME sourcing this several times in subshells seems inefficient.
     GNUSTEP_SYSTEM_HEADERS="$(. $GNUSTEP_CONFIG_FILE; echo $GNUSTEP_SYSTEM_HEADERS)"
     GNUSTEP_SYSTEM_LIBRARIES="$(. $GNUSTEP_CONFIG_FILE; echo $GNUSTEP_SYSTEM_LIBRARIES)"
     dnl I seemed to need these as well with GNUstep-startup 0.25.
     GNUSTEP_LOCAL_HEADERS="$(. $GNUSTEP_CONFIG_FILE; echo $GNUSTEP_LOCAL_HEADERS)"
     GNUSTEP_LOCAL_LIBRARIES="$(. $GNUSTEP_CONFIG_FILE; echo $GNUSTEP_LOCAL_LIBRARIES)"
     test "x${GNUSTEP_LOCAL_HEADERS}" != "x" && \
       GNUSTEP_LOCAL_HEADERS="-I${GNUSTEP_LOCAL_HEADERS}"
     test "x${GNUSTEP_LOCAL_LIBRARIES}" != "x" && \
       GNUSTEP_LOCAL_LIBRARIES="-L${GNUSTEP_LOCAL_LIBRARIES}"
     CPPFLAGS="$CPPFLAGS -I${GNUSTEP_SYSTEM_HEADERS} ${GNUSTEP_LOCAL_HEADERS}"
     CFLAGS="$CFLAGS -I${GNUSTEP_SYSTEM_HEADERS} ${GNUSTEP_LOCAL_HEADERS}"
     LDFLAGS="$LDFLAGS -L${GNUSTEP_SYSTEM_LIBRARIES} ${GNUSTEP_LOCAL_LIBRARIES}"
     LIBS_GNUSTEP="-lgnustep-gui -lgnustep-base -lobjc -lpthread"
     dnl GNUstep defines BASE_NATIVE_OBJC_EXCEPTIONS to 0 or 1.
     dnl If they had chosen to either define it or not, we could have
     dnl just used AC_CHECK_DECL here.
     AC_CACHE_CHECK(if GNUstep defines BASE_NATIVE_OBJC_EXCEPTIONS,
       emacs_cv_objc_exceptions,
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <GNUstepBase/GSConfig.h>]],
[[#if defined BASE_NATIVE_OBJC_EXCEPTIONS && BASE_NATIVE_OBJC_EXCEPTIONS > 0
1;
#else
fail;
#endif]])], emacs_cv_objc_exceptions=yes, emacs_cv_objc_exceptions=no ) )
     if test $emacs_cv_objc_exceptions = yes; then
       dnl _NATIVE_OBJC_EXCEPTIONS is used by the GNUstep headers.
       AC_DEFINE(_NATIVE_OBJC_EXCEPTIONS, 1,
         [Define if GNUstep uses ObjC exceptions.])
       GNU_OBJC_CFLAGS="-fobjc-exceptions"
     fi
  fi

  dnl This is only used while we test the NS headers, it gets reset below.
  CFLAGS="$CFLAGS $GNU_OBJC_CFLAGS"

  AC_CHECK_HEADER([AppKit/AppKit.h], [HAVE_NS=yes],
  		  [AC_MSG_ERROR([`--with-ns' was specified, but the include
  files are missing or cannot be compiled.])])

  macfont_file=""
  if test "${NS_IMPL_COCOA}" = "yes"; then
    AC_MSG_CHECKING([for OSX 10.4 or newer])
    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([#include <AppKit/AppKit.h>],
                                     [
#ifdef MAC_OS_X_VERSION_MAX_ALLOWED
#if MAC_OS_X_VERSION_MAX_ALLOWED >= 1040
 ; /* OK */
#else
 error "OSX 10.4 or newer required";
#endif
#endif
		    ])],
		    ns_osx_have_104=yes,
		    ns_osx_have_104=no)
    AC_MSG_RESULT([$ns_osx_have_104])

    if test $ns_osx_have_104 = no; then
       AC_MSG_ERROR([`OSX 10.4 or newer is required']);
    fi
    AC_MSG_CHECKING([for OSX 10.5 or newer])
    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([#include <AppKit/AppKit.h>],
                                     [
#ifdef MAC_OS_X_VERSION_MAX_ALLOWED
#if MAC_OS_X_VERSION_MAX_ALLOWED >= 1050
 ; /* OK */
#else
 error "OSX 10.5 not found";
#endif
#endif
		    ])],
		    ns_osx_have_105=yes,
		    ns_osx_have_105=no)
    AC_MSG_RESULT([$ns_osx_have_105])
    if test $ns_osx_have_105 = yes; then
      macfont_file="macfont.o"
    fi
  fi
  AC_COMPILE_IFELSE([AC_LANG_PROGRAM([#include <Foundation/NSObjCRuntime.h>],
                                     [NSInteger i;])],
		    ns_have_nsinteger=yes,
		    ns_have_nsinteger=no)
  if test $ns_have_nsinteger = yes; then
    AC_DEFINE(NS_HAVE_NSINTEGER, 1, [Define to 1 if `NSInteger' is defined.])
  fi
fi

AC_SUBST(LIBS_GNUSTEP)

INSTALL_ARCH_INDEP_EXTRA=install-etc
ns_self_contained=no
NS_OBJ=
NS_OBJC_OBJ=
if test "${HAVE_NS}" = yes; then
  if test "$with_toolkit_scroll_bars" = "no"; then
    AC_MSG_ERROR([Non-toolkit scroll bars are not implemented for Nextstep.])
  fi

  window_system=nextstep
  # set up packaging dirs
  if test "${EN_NS_SELF_CONTAINED}" = yes; then
     ns_self_contained=yes
     prefix=${ns_appresdir}
     exec_prefix=${ns_appbindir}
     dnl This one isn't really used, only archlibdir is.
     libexecdir="\${ns_appbindir}/libexec"
     archlibdir="\${ns_appbindir}/libexec"
     etcdocdir="\${ns_appresdir}/etc"
     etcdir="\${ns_appresdir}/etc"
     dnl FIXME maybe set datarootdir instead.
     dnl That would also get applications, icons, man.
     infodir="\${ns_appresdir}/info"
     mandir="\${ns_appresdir}/man"
     lispdir="\${ns_appresdir}/lisp"
     INSTALL_ARCH_INDEP_EXTRA=
  fi

  NS_OBJC_OBJ="nsterm.o nsfns.o nsmenu.o nsselect.o nsimage.o nsfont.o $macfont_file"
fi
CFLAGS="$tmp_CFLAGS"
CPPFLAGS="$tmp_CPPFLAGS"
AC_SUBST(INSTALL_ARCH_INDEP_EXTRA)
AC_SUBST(ns_self_contained)
AC_SUBST(NS_OBJ)
AC_SUBST(NS_OBJC_OBJ)

HAVE_W32=no
W32_OBJ=
W32_LIBS=
EMACSRES=
CLIENTRES=
CLIENTW=
W32_RES_LINK=
EMACS_MANIFEST=
UPDATE_MANIFEST=
if test "${with_w32}" != no; then
  case "${opsys}" in
    cygwin)
      AC_CHECK_HEADER([windows.h], [HAVE_W32=yes],
             [AC_MSG_ERROR([`--with-w32' was specified, but windows.h
                   cannot be found.])])
    ;;
    mingw)
    ## Using --with-w32 with MinGW is a no-op, but we allow it.
    ;;
    *)
      AC_MSG_ERROR([Using w32 with an autotools build is only supported for Cygwin and MinGW32.])
    ;;
  esac
fi

if test "${opsys}" = "mingw"; then
  AC_MSG_CHECKING([whether Windows API headers are recent enough])
  AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
     #include <windows.h>
     #include <usp10.h>]],
   [[PIMAGE_NT_HEADERS pHeader;
     PIMAGE_SECTION_HEADER pSection = IMAGE_FIRST_SECTION(pHeader)]])],
   [emacs_cv_w32api=yes
    HAVE_W32=yes],
   emacs_cv_w32api=no)
  AC_MSG_RESULT($emacs_cv_w32api)
  if test "${emacs_cv_w32api}" = "no"; then
    AC_MSG_ERROR([the Windows API headers are too old to support this build.])
  fi
fi

FIRSTFILE_OBJ=
NTDIR=
LIBS_ECLIENT=
LIB_WSOCK32=
NTLIB=
CM_OBJ="cm.o"
XARGS_LIMIT=
if test "${HAVE_W32}" = "yes"; then
  AC_DEFINE(HAVE_NTGUI, 1, [Define to use native MS Windows GUI.])
  AC_CHECK_TOOL(WINDRES, [windres],
                [AC_MSG_ERROR([No resource compiler found.])])
  W32_OBJ="w32fns.o w32menu.o w32reg.o w32font.o w32term.o"
  W32_OBJ="$W32_OBJ w32xfns.o w32select.o w32uniscribe.o"
  EMACSRES="emacs.res"
  case "$canonical" in
    x86_64-*-*) EMACS_MANIFEST="emacs-x64.manifest" ;;
    *) EMACS_MANIFEST="emacs-x86.manifest" ;;
  esac
  if test "${opsys}" = "cygwin"; then
    W32_LIBS="$W32_LIBS -lkernel32 -luser32 -lgdi32 -lole32 -lcomdlg32"
    W32_LIBS="$W32_LIBS -lusp10 -lcomctl32 -lwinspool"
    # Tell the linker that emacs.res is an object (which we compile from
    # the rc file), not a linker script.
    W32_RES_LINK="-Wl,emacs.res"
  else
    UPDATE_MANIFEST=update-game-score.exe.manifest
    W32_OBJ="$W32_OBJ w32.o w32console.o w32heap.o w32inevt.o w32proc.o"
    W32_LIBS="$W32_LIBS -lwinmm -lgdi32 -lcomdlg32"
    W32_LIBS="$W32_LIBS -lmpr -lwinspool -lole32 -lcomctl32 -lusp10"
    W32_RES_LINK="\$(EMACSRES)"
    CLIENTRES="emacsclient.res"
    CLIENTW="emacsclientw\$(EXEEXT)"
    FIRSTFILE_OBJ=firstfile.o
    NTDIR=nt
    CM_OBJ=
    LIBS_ECLIENT="-lcomctl32"
    LIB_WSOCK32="-lwsock32"
    NTLIB="ntlib.$ac_objext"
    XARGS_LIMIT="-s 10000"
  fi
fi
AC_SUBST(W32_OBJ)
AC_SUBST(W32_LIBS)
AC_SUBST(EMACSRES)
AC_SUBST(EMACS_MANIFEST)
AC_SUBST(UPDATE_MANIFEST)
AC_SUBST(CLIENTRES)
AC_SUBST(CLIENTW)
AC_SUBST(W32_RES_LINK)
AC_SUBST(FIRSTFILE_OBJ)
AC_SUBST(NTDIR)
AC_SUBST(CM_OBJ)
AC_SUBST(LIBS_ECLIENT)
AC_SUBST(LIB_WSOCK32)
AC_SUBST(NTLIB)
AC_SUBST(XARGS_LIMIT)

if test "${HAVE_W32}" = "yes"; then
  window_system=w32
  with_xft=no
fi

## $window_system is now set to the window system we will
## ultimately use.

if test "$window_system" = none && test "$gl_gcc_warnings" = yes; then
   # Too many warnings for now.
   nw=
   nw="$nw -Wsuggest-attribute=const"
   nw="$nw -Wsuggest-attribute=noreturn"
   gl_MANYWARN_COMPLEMENT([WARN_CFLAGS], [$WARN_CFLAGS], [$nw])

   gl_WARN_ADD([-Wno-unused-variable])
   gl_WARN_ADD([-Wno-unused-but-set-variable])
   gl_WARN_ADD([-Wno-unused-but-set-parameter])
fi

term_header=
HAVE_X_WINDOWS=no
HAVE_X11=no
USE_X_TOOLKIT=none

case "${window_system}" in
  x11 )
    HAVE_X_WINDOWS=yes
    HAVE_X11=yes
    term_header=xterm.h
    case "${with_x_toolkit}" in
      athena | lucid ) USE_X_TOOLKIT=LUCID ;;
      motif ) USE_X_TOOLKIT=MOTIF ;;
      gtk ) with_gtk=yes
            term_header=gtkutil.h
dnl Don't set this for GTK.  A lot of tests below assumes Xt when
dnl USE_X_TOOLKIT is set.
            USE_X_TOOLKIT=none ;;
      gtk2 ) with_gtk2=yes
             term_header=gtkutil.h
             USE_X_TOOLKIT=none ;;
      gtk3 ) with_gtk3=yes
             term_header=gtkutil.h
             USE_X_TOOLKIT=none ;;
      no ) USE_X_TOOLKIT=none ;;
dnl If user did not say whether to use a toolkit, make this decision later:
dnl use the toolkit if we have gtk, or X11R5 or newer.
      * ) USE_X_TOOLKIT=maybe ;;
    esac
  ;;
  nextstep )
    term_header=nsterm.h
  ;;
  w32 )
    term_header=w32term.h
  ;;
esac

if test "$window_system" = none && test "X$with_x" != "Xno"; then
   AC_CHECK_PROG(HAVE_XSERVER, X, true, false)
   if test "$HAVE_XSERVER" = true ||
      test -n "$DISPLAY" ||
      test "`echo /usr/lib/libX11.*`" != "/usr/lib/libX11.*"; then
        AC_MSG_ERROR([You seem to be running X, but no X development libraries
were found.  You should install the relevant development files for X
and for the toolkit you want, such as Gtk+ or Motif.  Also make
sure you have development files for image handling, i.e.
tiff, gif, jpeg, png and xpm.
If you are sure you want Emacs compiled without X window support, pass
  --without-x
to configure.])
   fi
fi

# Does the opsystem file prohibit the use of the GNU malloc?
# Assume not, until told otherwise.
GNU_MALLOC=yes

AC_CACHE_CHECK(
  [whether malloc is Doug Lea style],
  [emacs_cv_var_doug_lea_malloc],
  [emacs_cv_var_doug_lea_malloc=no
   dnl Hooks do not work with address sanitization.
   if test "$emacs_cv_sanitize_address" != yes; then
     AC_LINK_IFELSE(
       [AC_LANG_PROGRAM(
	  [[#include <malloc.h>
	    static void hook (void) {}]],
	  [[malloc_set_state (malloc_get_state ());
	    __after_morecore_hook = hook;
	    __malloc_initialize_hook = hook;]])],
       [emacs_cv_var_doug_lea_malloc=yes])])
   fi
doug_lea_malloc=$emacs_cv_var_doug_lea_malloc

system_malloc=$emacs_cv_sanitize_address
case "$opsys" in
  ## darwin ld insists on the use of malloc routines in the System framework.
  darwin|mingw|sol2-10) system_malloc=yes ;;
esac

GMALLOC_OBJ=
if test "${system_malloc}" = "yes"; then
  AC_DEFINE([SYSTEM_MALLOC], 1,
    [Define to 1 to use the system memory allocator, even if it is not
     Doug Lea style.])
  GNU_MALLOC=no
  GNU_MALLOC_reason="
    (The GNU allocators don't work with this system configuration.)"
  VMLIMIT_OBJ=
else
  test "$doug_lea_malloc" != "yes" && GMALLOC_OBJ=gmalloc.o
  VMLIMIT_OBJ=vm-limit.o

  AC_CHECK_HEADERS([sys/vlimit.h])
  AC_CACHE_CHECK([for data_start], [emacs_cv_data_start],
    [AC_LINK_IFELSE(
       [AC_LANG_PROGRAM(
	 [[extern char data_start[]; char ch;]],
	 [[return data_start < &ch;]])],
       [emacs_cv_data_start=yes],
       [emacs_cv_data_start=no])])
  if test $emacs_cv_data_start = yes; then
    AC_DEFINE([HAVE_DATA_START], 1,
      [Define to 1 if data_start is the address of the start
       of the main data segment.])
  fi
fi
AC_SUBST(GMALLOC_OBJ)
AC_SUBST(VMLIMIT_OBJ)

if test "$doug_lea_malloc" = "yes" ; then
  if test "$GNU_MALLOC" = yes ; then
    GNU_MALLOC_reason="
      (Using Doug Lea's new malloc from the GNU C Library.)"
  fi
  AC_DEFINE(DOUG_LEA_MALLOC, 1,
    [Define to 1 if the system memory allocator is Doug Lea style,
     with malloc hooks and malloc_set_state.])

  ## Use mmap directly for allocating larger buffers.
  ## FIXME this comes from src/s/{gnu,gnu-linux}.h:
  ## #ifdef DOUG_LEA_MALLOC; #undef REL_ALLOC; #endif
  ## Does the AC_FUNC_MMAP test below make this check unnecessary?
  case "$opsys" in
    mingw|gnu*) REL_ALLOC=no ;;
  esac
fi

if test x"${REL_ALLOC}" = x; then
  REL_ALLOC=${GNU_MALLOC}
fi

use_mmap_for_buffers=no
case "$opsys" in
  cygwin|mingw|freebsd|irix6-5) use_mmap_for_buffers=yes ;;
esac

AC_FUNC_MMAP
if test $use_mmap_for_buffers = yes; then
  AC_DEFINE(USE_MMAP_FOR_BUFFERS, 1, [Define to use mmap to allocate buffer text.])
  REL_ALLOC=no
fi

LIBS="$LIBS_SYSTEM $LIBS"

dnl FIXME replace main with a function we actually want from this library.
AC_CHECK_LIB(Xbsd, main, LD_SWITCH_X_SITE="$LD_SWITCH_X_SITE -lXbsd")

dnl Check for the POSIX thread library.
LIB_PTHREAD=
if test "$opsys" != "mingw"; then
AC_CHECK_HEADERS_ONCE(pthread.h)
if test "$ac_cv_header_pthread_h"; then
  dnl gmalloc.c uses pthread_atfork, which is not available on older-style
  dnl hosts such as MirBSD 10, so test for pthread_atfork instead of merely
  dnl testing for pthread_kill if Emacs uses gmalloc.c.
  if test "$GMALLOC_OBJ" = gmalloc.o; then
    emacs_pthread_function=pthread_atfork
  else
    emacs_pthread_function=pthread_kill
  fi
  OLD_LIBS=$LIBS
  AC_SEARCH_LIBS([$emacs_pthread_function], [pthread],
    [AC_DEFINE([HAVE_PTHREAD], [1],
       [Define to 1 if you have pthread (-lpthread).])
     # Some systems optimize for single-threaded programs by default, and
     # need special flags to disable these optimizations. For example, the
     # definition of 'errno' in <errno.h>.
     case $opsys in
       sol*)
         AC_DEFINE([_REENTRANT], 1,
   	[Define to 1 if your system requires this in multithreaded code.]);;
       aix4-2)
         AC_DEFINE([_THREAD_SAFE], 1,
   	[Define to 1 if your system requires this in multithreaded code.]);;
     esac])
 if test "X$LIBS" != "X$OLD_LIBS"; then
    eval LIB_PTHREAD=\$ac_cv_search_$emacs_pthread_function
  fi
  LIBS=$OLD_LIBS
fi
AC_SUBST([LIB_PTHREAD])
fi

dnl Check for need for bigtoc support on IBM AIX

case ${host_os} in
aix*)
  AC_CACHE_CHECK([for -bbigtoc option], [gdb_cv_bigtoc], [
    case $GCC in
    yes) gdb_cv_bigtoc=-Wl,-bbigtoc ;;
    *) gdb_cv_bigtoc=-bbigtoc ;;
    esac

    LDFLAGS=$LDFLAGS\ $gdb_cv_bigtoc
    AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[int i;]])], [], [gdb_cv_bigtoc=])
  ])
  ;;
esac

# Change CFLAGS, CPPFLAGS, and LIBS temporarily so that C_SWITCH_X_SITE
# is for the tests that follow.  We set them back later on.

REAL_CFLAGS="$CFLAGS"
REAL_CPPFLAGS="$CPPFLAGS"
REAL_LIBS="$LIBS"

if test "${HAVE_X11}" = "yes"; then
  DEFS="$C_SWITCH_X_SITE $DEFS"
  LDFLAGS="$LDFLAGS $LD_SWITCH_X_SITE"
  LIBS="-lX11 $LIBS"
  CFLAGS="$C_SWITCH_X_SITE $CFLAGS"
  CPPFLAGS="$C_SWITCH_X_SITE $CPPFLAGS"

  # On Solaris, arrange for LD_RUN_PATH to point to the X libraries for tests.
  # This is handled by LD_SWITCH_X_SITE_RPATH during the real build,
  # but it's more convenient here to set LD_RUN_PATH since this
  # also works on hosts that don't understand LD_SWITCH_X_SITE_RPATH.
  if test "${x_libraries}" != NONE && test -n "${x_libraries}"; then
    LD_RUN_PATH=$x_libraries${LD_RUN_PATH+:}$LD_RUN_PATH
    export LD_RUN_PATH
  fi

  if test "${opsys}" = "gnu-linux"; then
    AC_MSG_CHECKING(whether X on GNU/Linux needs -b to link)
    AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],
     [[XOpenDisplay ("foo");]])],
     [xgnu_linux_first_failure=no],
     [xgnu_linux_first_failure=yes])
    if test "${xgnu_linux_first_failure}" = "yes"; then
      OLD_CPPFLAGS="$CPPFLAGS"
      OLD_LIBS="$LIBS"
      CPPFLAGS="$CPPFLAGS -b i486-linuxaout"
      LIBS="$LIBS -b i486-linuxaout"
      AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],
       [[XOpenDisplay ("foo");]])],
       [xgnu_linux_second_failure=no],
       [xgnu_linux_second_failure=yes])
      if test "${xgnu_linux_second_failure}" = "yes"; then
	# If we get the same failure with -b, there is no use adding -b.
	# So leave it out.  This plays safe.
        AC_MSG_RESULT(no)
      else
	LD_SWITCH_X_SITE="$LD_SWITCH_X_SITE -b i486-linuxaout"
	C_SWITCH_X_SITE="$C_SWITCH_X_SITE -b i486-linuxaout"
        AC_MSG_RESULT(yes)
      fi
      CPPFLAGS=$OLD_CPPFLAGS
      LIBS=$OLD_LIBS
    else
      AC_MSG_RESULT(no)
    fi
  fi

  # Reportedly, some broken Solaris systems have XKBlib.h but are missing
  # header files included from there.
  AC_MSG_CHECKING(for Xkb)
  AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <X11/Xlib.h>
#include <X11/XKBlib.h>]],
	[[XkbDescPtr kb = XkbGetKeyboard (0, XkbAllComponentsMask, XkbUseCoreKbd);]])],
	emacs_xkb=yes, emacs_xkb=no)
  AC_MSG_RESULT($emacs_xkb)
  if test $emacs_xkb = yes; then
    AC_DEFINE(HAVE_XKB, 1, [Define to 1 if you have the Xkb extension.])
  fi

  AC_CHECK_FUNCS(XrmSetDatabase XScreenResourceString \
XScreenNumberOfScreen)
fi

if test "${window_system}" = "x11"; then
  AC_MSG_CHECKING(X11 version 6)
  AC_CACHE_VAL(emacs_cv_x11_version_6,
  [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <X11/Xlib.h>]],
[[#if XlibSpecificationRelease < 6
fail;
#endif
]])], emacs_cv_x11_version_6=yes, emacs_cv_x11_version_6=no)])
  if test $emacs_cv_x11_version_6 = yes; then
    AC_MSG_RESULT(6 or newer)
    AC_DEFINE(HAVE_X11R6, 1,
	      [Define to 1 if you have the X11R6 or newer version of Xlib.])
    AC_DEFINE(HAVE_X_I18N, 1, [Define if you have usable i18n support.])
    ## inoue@ainet.or.jp says Solaris has a bug related to X11R6-style
    ## XIM support.
    case "$opsys" in
      sol2-*) : ;;
      *) AC_DEFINE(HAVE_X11R6_XIM, 1,
           [Define if you have usable X11R6-style XIM support.])
         ;;
    esac
  else
    AC_MSG_RESULT(before 6)
  fi
fi


### Use -lrsvg-2 if available, unless `--with-rsvg=no' is specified.
HAVE_RSVG=no
if test "${HAVE_X11}" = "yes" || test "${HAVE_NS}" = "yes" || test "${opsys}" = "mingw"; then
  if test "${with_rsvg}" != "no"; then
    RSVG_REQUIRED=2.11.0
    RSVG_MODULE="librsvg-2.0 >= $RSVG_REQUIRED"

    EMACS_CHECK_MODULES([RSVG], [$RSVG_MODULE])
    AC_SUBST(RSVG_CFLAGS)
    AC_SUBST(RSVG_LIBS)

    if test $HAVE_RSVG = yes; then
      AC_DEFINE(HAVE_RSVG, 1, [Define to 1 if using librsvg.])
      CFLAGS="$CFLAGS $RSVG_CFLAGS"
      # Windows loads librsvg dynamically
      if test "${opsys}" = "mingw"; then
       	RSVG_LIBS=
      fi
    fi
  fi
fi

HAVE_IMAGEMAGICK=no
if test "${HAVE_X11}" = "yes" || test "${HAVE_NS}" = "yes" || test "${HAVE_W32}" = "yes"; then
  if test "${with_imagemagick}" != "no"; then
    ## 6.3.5 is the earliest version known to work; see Bug#17339.
    ## 6.8.2 makes Emacs crash; see Bug#13867.
    IMAGEMAGICK_MODULE="Wand >= 6.3.5 Wand != 6.8.2"
    EMACS_CHECK_MODULES([IMAGEMAGICK], [$IMAGEMAGICK_MODULE])
    AC_SUBST(IMAGEMAGICK_CFLAGS)
    AC_SUBST(IMAGEMAGICK_LIBS)

    if test $HAVE_IMAGEMAGICK = yes; then
      AC_DEFINE(HAVE_IMAGEMAGICK, 1, [Define to 1 if using imagemagick.])
      OLD_CFLAGS=$CFLAGS
      OLD_LIBS=$LIBS
      CFLAGS="$CFLAGS $IMAGEMAGICK_CFLAGS"
      LIBS="$IMAGEMAGICK_LIBS $LIBS"
      AC_CHECK_FUNCS(MagickExportImagePixels MagickMergeImageLayers)
      CFLAGS=$OLD_CFLAGS
      LIBS=$OLD_LIBS
    fi
  fi
fi


HAVE_GTK=no
GTK_OBJ=
gtk_term_header=$term_header
check_gtk2=no
gtk3_pkg_errors=
if test "${opsys}" != "mingw"; then
  if test "${with_gtk3}" = "yes" || test "${with_gtk}" = "yes" || test "$USE_X_TOOLKIT" = "maybe"; then
    GLIB_REQUIRED=2.28
    GTK_REQUIRED=3.0
    GTK_MODULES="gtk+-3.0 >= $GTK_REQUIRED glib-2.0 >= $GLIB_REQUIRED"

    dnl Checks for libraries.
    EMACS_CHECK_MODULES([GTK], [$GTK_MODULES],
      [pkg_check_gtk=yes], [pkg_check_gtk=no])
    if test "$pkg_check_gtk" = "no" && test "$with_gtk3" = "yes"; then
       AC_MSG_ERROR($GTK_PKG_ERRORS)
    fi
    if test "$pkg_check_gtk" = "yes"; then
       AC_DEFINE(HAVE_GTK3, 1, [Define to 1 if using GTK 3 or later.])
       GTK_OBJ=emacsgtkfixed.o
       gtk_term_header=gtkutil.h
       USE_GTK_TOOLKIT="GTK3"
       if test "x$ac_enable_gtk_deprecation_warnings" = x; then
	 AC_DEFINE([GDK_DISABLE_DEPRECATION_WARNINGS], [1],
	   [Define to 1 to disable GTK+/GDK deprecation warnings.])
	 AC_DEFINE([GLIB_DISABLE_DEPRECATION_WARNINGS], [1],
	   [Define to 1 to disable Glib deprecation warnings.])
       fi
    else
       check_gtk2=yes
       gtk3_pkg_errors="$GTK_PKG_ERRORS "
    fi
  fi

  if test "${with_gtk2}" = "yes" || test "$check_gtk2" = "yes"; then
    GLIB_REQUIRED=2.10
    GTK_REQUIRED=2.10
    GTK_MODULES="gtk+-2.0 >= $GTK_REQUIRED glib-2.0 >= $GLIB_REQUIRED"

    dnl Checks for libraries.
    EMACS_CHECK_MODULES([GTK], [$GTK_MODULES],
      [pkg_check_gtk=yes], [pkg_check_gtk=no])
    if test "$pkg_check_gtk" = "no" &&
       { test "$with_gtk" = yes || test "$with_gtk2" = "yes"; }
    then
      AC_MSG_ERROR($gtk3_pkg_errors$GTK_PKG_ERRORS)
    fi
    test "$pkg_check_gtk" = "yes" && USE_GTK_TOOLKIT="GTK2"
  fi
fi

OLD_CFLAGS=$CFLAGS
OLD_LIBS=$LIBS

if test x"$pkg_check_gtk" = xyes; then

  AC_SUBST(GTK_LIBS)
  CFLAGS="$CFLAGS $GTK_CFLAGS"
  LIBS="$GTK_LIBS $LIBS"
  dnl Try to compile a simple GTK program.
  AC_MSG_CHECKING([whether GTK compiles])
  GTK_COMPILES=no
  AC_LINK_IFELSE(
    [AC_LANG_PROGRAM(
       [[/* Check the Gtk and Glib APIs.  */
	 #include <gtk/gtk.h>
	 #include <glib-object.h>
	 static void
	 callback (GObject *go, GParamSpec *spec, gpointer user_data)
	 {}
       ]],
       [[
	 GtkSettings *gs = 0;
	 /* Use G_CALLBACK to make sure function pointers can be cast to void *;
	    strict C prohibits this.  Use gtk_main_iteration to test that the
	    libraries are there.  */
	 if (g_signal_handler_find (G_OBJECT (gs), G_SIGNAL_MATCH_FUNC,
				    0, 0, 0, G_CALLBACK (callback), 0))
	   gtk_main_iteration ();
       ]])],
    [GTK_COMPILES=yes])
  AC_MSG_RESULT([$GTK_COMPILES])
  if test "${GTK_COMPILES}" != "yes"; then
    GTK_OBJ=
    if test "$USE_X_TOOLKIT" != "maybe"; then
      AC_MSG_ERROR([Gtk+ wanted, but it does not compile, see config.log.  Maybe some x11-devel files missing?]);
    fi
  else
    C_SWITCH_X_SITE="$C_SWITCH_X_SITE $GTK_CFLAGS"
    HAVE_GTK=yes
    AC_DEFINE(USE_GTK, 1, [Define to 1 if using GTK.])
    GTK_OBJ="gtkutil.o $GTK_OBJ"
    term_header=$gtk_term_header
    USE_X_TOOLKIT=none
    if "$PKG_CONFIG" --atleast-version=2.10 gtk+-2.0; then
      :
    else
      AC_MSG_WARN([[Your version of Gtk+ will have problems with
       closing open displays.  This is no problem if you just use
       one display, but if you use more than one and close one of them
       Emacs may crash.]])
      sleep 3
    fi
  fi

fi
AC_SUBST(GTK_OBJ)


if test "${HAVE_GTK}" = "yes"; then

  dnl  GTK scrollbars resemble toolkit scrollbars a lot, so to avoid
  dnl  a lot if #ifdef:s, say we have toolkit scrollbars.
  if test "$with_toolkit_scroll_bars" != no; then
    with_toolkit_scroll_bars=yes
  fi

  dnl  Check if we have the old file selection dialog declared and
  dnl  in the link library.  In 2.x it may be in the library,
  dnl  but not declared if deprecated featured has been selected out.
  dnl  AC_CHECK_DECL checks for a macro, so check for GTK_TYPE_FILE_SELECTION.
  HAVE_GTK_FILE_SELECTION=no
  AC_CHECK_DECL(GTK_TYPE_FILE_SELECTION, HAVE_GTK_FILE_SELECTION=yes,
                   HAVE_GTK_FILE_SELECTION=no, [AC_INCLUDES_DEFAULT
#include <gtk/gtk.h>])
  if test "$HAVE_GTK_FILE_SELECTION" = yes; then
    AC_CHECK_FUNCS(gtk_file_selection_new)
  fi

  dnl Same as above for gtk_handle_box.
  HAVE_GTK_HANDLE_BOX=no
  AC_CHECK_DECL(GTK_TYPE_HANDLE_BOX, HAVE_GTK_HANDLE_BOX=yes,
                   HAVE_GTK_HANDLE_BOX=no, [AC_INCLUDES_DEFAULT
#include <gtk/gtk.h>])
  if test "$HAVE_GTK_HANDLE_BOX" = yes; then
    AC_CHECK_FUNCS(gtk_handle_box_new)
  fi

  dnl Same as above for gtk_tearoff_menu_item.
  HAVE_GTK_TEAROFF_MENU_ITEM=no
  AC_CHECK_DECL(GTK_TYPE_TEAROFF_MENU_ITEM, HAVE_GTK_TEAROFF_MENU_ITEM=yes,
                   HAVE_GTK_TEAROFF_MENU_ITEM=no, [AC_INCLUDES_DEFAULT
#include <gtk/gtk.h>])
  if test "$HAVE_GTK_TEAROFF_MENU_ITEM" = yes; then
    AC_CHECK_FUNCS(gtk_tearoff_menu_item_new)
  fi

  dnl Check for functions introduced in 2.14 and later.
  AC_CHECK_FUNCS(gtk_widget_get_window gtk_widget_set_has_window \
                 gtk_dialog_get_action_area gtk_widget_get_sensitive \
                 gtk_widget_get_mapped gtk_adjustment_get_page_size \
                 gtk_orientable_set_orientation \
		 gtk_window_set_has_resize_grip)

 term_header=gtkutil.h
fi

CFLAGS=$OLD_CFLAGS
LIBS=$OLD_LIBS

dnl D-Bus has been tested under GNU/Linux only.  Must be adapted for
dnl other platforms.
HAVE_DBUS=no
DBUS_OBJ=
if test "${with_dbus}" = "yes"; then
   EMACS_CHECK_MODULES([DBUS], [dbus-1 >= 1.0])
   if test "$HAVE_DBUS" = yes; then
     AC_DEFINE(HAVE_DBUS, 1, [Define to 1 if using D-Bus.])
     dnl dbus_watch_get_unix_fd has been introduced in D-Bus 1.1.1.
     dnl dbus_type_is_valid and dbus_validate_* have been introduced in
     dnl D-Bus 1.5.12.
     OLD_LIBS=$LIBS
     LIBS="$LIBS $DBUS_LIBS"
     AC_CHECK_FUNCS(dbus_watch_get_unix_fd \
		    dbus_type_is_valid \
		    dbus_validate_bus_name \
                    dbus_validate_path \
		    dbus_validate_interface \
		    dbus_validate_member)
     LIBS=$OLD_LIBS
     DBUS_OBJ=dbusbind.o
   fi
fi
AC_SUBST(DBUS_CFLAGS)
AC_SUBST(DBUS_LIBS)
AC_SUBST(DBUS_OBJ)

dnl GSettings has been tested under GNU/Linux only.
HAVE_GSETTINGS=no
if test "${HAVE_X11}" = "yes" && test "${with_gsettings}" = "yes"; then
   EMACS_CHECK_MODULES([GSETTINGS], [gio-2.0 >= 2.26])
   if test "$HAVE_GSETTINGS" = "yes"; then
      old_CFLAGS=$CFLAGS
      CFLAGS="$CFLAGS $GSETTINGS_CFLAGS"
      old_LIBS=$LIBS
      LIBS="$LIBS $GSETTINGS_LIBS"
      AC_MSG_CHECKING([whether GSettings is in gio])
      AC_LINK_IFELSE(
         [AC_LANG_PROGRAM(
 	     [[/* Check that gsettings really is present.  */
             #include <glib-object.h>
	     #include <gio/gio.h>
 	     ]],
 	     [[
	       GSettings *settings;
	       GVariant *val = g_settings_get_value (settings, "");
 	     ]])],
 	 [], HAVE_GSETTINGS=no)
      AC_MSG_RESULT([$HAVE_GSETTINGS])

      if test "$HAVE_GSETTINGS" = "yes"; then
        AC_DEFINE(HAVE_GSETTINGS, 1, [Define to 1 if using GSettings.])
 	SETTINGS_CFLAGS="$GSETTINGS_CFLAGS"
 	SETTINGS_LIBS="$GSETTINGS_LIBS"
      fi
      CFLAGS=$old_CFLAGS
      LIBS=$old_LIBS
   fi
fi

dnl GConf has been tested under GNU/Linux only.
dnl The version is really arbitrary, it is about the same age as Gtk+ 2.6.
HAVE_GCONF=no
if test "${HAVE_X11}" = "yes" && test "${with_gconf}" = "yes"; then
   EMACS_CHECK_MODULES([GCONF], [gconf-2.0 >= 2.13])
   if test "$HAVE_GCONF" = yes; then
      AC_DEFINE(HAVE_GCONF, 1, [Define to 1 if using GConf.])
      dnl Newer GConf doesn't link with g_objects, so this is not defined.
      SETTINGS_CFLAGS="$SETTINGS_CFLAGS $GCONF_CFLAGS"
      SETTINGS_LIBS="$SETTINGS_LIBS $GCONF_LIBS"
   fi
fi

if test "$HAVE_GSETTINGS" = "yes" || test "$HAVE_GCONF" = "yes"; then
    EMACS_CHECK_MODULES([GOBJECT], [gobject-2.0 >= 2.0])
    if test "$HAVE_GOBJECT" = "yes"; then
       SETTINGS_CFLAGS="$SETTINGS_CFLAGS $GOBJECT_CFLAGS"
       SETTINGS_LIBS="$SETTINGS_LIBS $GOBJECT_LIBS"
    fi
    SAVE_CFLAGS="$CFLAGS"
    SAVE_LIBS="$LIBS"
    CFLAGS="$SETTINGS_CFLAGS $CFLAGS"
    LIBS="$SETTINGS_LIBS $LIBS"
    CFLAGS="$SAVE_CFLAGS"
    LIBS="$SAVE_LIBS"
fi
AC_SUBST(SETTINGS_CFLAGS)
AC_SUBST(SETTINGS_LIBS)


dnl SELinux is available for GNU/Linux only.
HAVE_LIBSELINUX=no
LIBSELINUX_LIBS=
if test "${with_selinux}" = "yes"; then
   AC_CHECK_LIB([selinux], [lgetfilecon], HAVE_LIBSELINUX=yes, HAVE_LIBSELINUX=no)
   if test "$HAVE_LIBSELINUX" = yes; then
      AC_DEFINE(HAVE_LIBSELINUX, 1, [Define to 1 if using SELinux.])
      LIBSELINUX_LIBS=-lselinux
   fi
fi
AC_SUBST(LIBSELINUX_LIBS)

HAVE_GNUTLS=no
HAVE_GNUTLS3=no
if test "${with_gnutls}" = "yes" ; then
  EMACS_CHECK_MODULES([LIBGNUTLS], [gnutls >= 3.0.0],
    [HAVE_GNUTLS3=yes], [HAVE_GNUTLS3=no])
  if test "${HAVE_GNUTLS3}" = "yes"; then
    AC_DEFINE(HAVE_GNUTLS3, 1, [Define if using GnuTLS v3.])
    HAVE_GNUTLS="yes"
  else
    EMACS_CHECK_MODULES([LIBGNUTLS], [gnutls >= 2.6.6],
      [HAVE_GNUTLS=yes], [HAVE_GNUTLS=no])
  fi
  if test "${HAVE_GNUTLS}" = "yes"; then
    AC_DEFINE(HAVE_GNUTLS, 1, [Define if using GnuTLS.])
  fi

  # Windows loads GnuTLS dynamically
  if test "${opsys}" = "mingw"; then
    LIBGNUTLS_LIBS=
  fi
fi

AC_SUBST(LIBGNUTLS_LIBS)
AC_SUBST(LIBGNUTLS_CFLAGS)

NOTIFY_OBJ=
NOTIFY_SUMMARY=no

dnl FIXME?  Don't auto-detect on NS, but do allow someone to specify
dnl a particular library.  This doesn't make much sense?
if test "${with_ns}" = yes && test ${with_file_notification} = yes; then
  with_file_notification=no
fi

dnl MS Windows native file monitor is available for mingw32 only.
case $with_file_notification,$opsys in
  w32,* | yes,mingw)
    AC_CHECK_HEADER(windows.h)
    if test "$ac_cv_header_windows_h" = yes ; then
       AC_DEFINE(HAVE_W32NOTIFY, 1, [Define to 1 to use w32notify.])
       NOTIFY_OBJ=w32notify.o
       NOTIFY_SUMMARY="yes (w32)"
    fi ;;
esac

dnl g_file_monitor exists since glib 2.18.  G_FILE_MONITOR_EVENT_MOVED
dnl has been added in glib 2.24.  It has been tested under
dnl GNU/Linux only.  We take precedence over inotify, but this makes
dnl only sense when glib has been compiled with inotify support.  How
dnl to check?
case $with_file_notification,$NOTIFY_OBJ in
  gfile, | yes,)
    EMACS_CHECK_MODULES([GFILENOTIFY], [gio-2.0 >= 2.24])
    if test "$HAVE_GFILENOTIFY" = "yes"; then
       AC_DEFINE(HAVE_GFILENOTIFY, 1, [Define to 1 if using GFile.])
       NOTIFY_OBJ=gfilenotify.o
       NOTIFY_SUMMARY="yes -lgio (gfile)"
    fi ;;
esac

dnl inotify is only available on GNU/Linux.
case $with_file_notification,$NOTIFY_OBJ in
  inotify, | yes,)
    AC_CHECK_HEADER(sys/inotify.h)
    if test "$ac_cv_header_sys_inotify_h" = yes ; then
	AC_CHECK_FUNC(inotify_init1)
	if test "$ac_cv_func_inotify_init1" = yes; then
	  AC_DEFINE(HAVE_INOTIFY, 1, [Define to 1 to use inotify.])
	  NOTIFY_OBJ=inotify.o
	  NOTIFY_SUMMARY="yes -lglibc (inotify)"
       fi
    fi ;;
esac

case $with_file_notification,$NOTIFY_OBJ in
  yes,* | no,* | *,?*) ;;
  *) AC_MSG_ERROR([File notification `$with_file_notification' requested but requirements not found.]) ;;
esac

if test -n "$NOTIFY_OBJ"; then
   AC_DEFINE(USE_FILE_NOTIFY, 1, [Define to 1 if using file notifications.])
fi
AC_SUBST(NOTIFY_OBJ)
AC_SUBST(GFILENOTIFY_CFLAGS)
AC_SUBST(GFILENOTIFY_LIBS)

dnl Do not put whitespace before the #include statements below.
dnl Older compilers (eg sunos4 cc) choke on it.
HAVE_XAW3D=no
LUCID_LIBW=
if test x"${USE_X_TOOLKIT}" = xmaybe || test x"${USE_X_TOOLKIT}" = xLUCID; then
  if test "$with_xaw3d" != no; then
    AC_CACHE_VAL(emacs_cv_xaw3d,
    [AC_LINK_IFELSE([AC_LANG_PROGRAM([[
#include <X11/Intrinsic.h>
#include <X11/Xaw3d/Simple.h>]],
      [[]])],
      [AC_CHECK_LIB(Xaw3d, XawScrollbarSetThumb,
                    emacs_cv_xaw3d=yes, emacs_cv_xaw3d=no)],
      emacs_cv_xaw3d=no)])
  else
    emacs_cv_xaw3d=no
  fi
  if test $emacs_cv_xaw3d = yes; then
    AC_MSG_CHECKING(for xaw3d)
    AC_MSG_RESULT([yes; using Lucid toolkit])
    USE_X_TOOLKIT=LUCID
    HAVE_XAW3D=yes
    LUCID_LIBW=-lXaw3d
    AC_DEFINE(HAVE_XAW3D, 1,
              [Define to 1 if you have the Xaw3d library (-lXaw3d).])
  else
    AC_MSG_CHECKING(for xaw3d)
    AC_MSG_RESULT(no)
    AC_MSG_CHECKING(for libXaw)
    AC_CACHE_VAL(emacs_cv_xaw,
    [AC_LINK_IFELSE([AC_LANG_PROGRAM([[
#include <X11/Intrinsic.h>
#include <X11/Xaw/Simple.h>]],
      [[]])],
      emacs_cv_xaw=yes,
      emacs_cv_xaw=no)])
    if test $emacs_cv_xaw = yes; then
      AC_MSG_RESULT([yes; using Lucid toolkit])
      USE_X_TOOLKIT=LUCID
      LUCID_LIBW=-lXaw
    elif test x"${USE_X_TOOLKIT}" = xLUCID; then
      AC_MSG_ERROR([Lucid toolkit requires X11/Xaw include files])
    else
      AC_MSG_ERROR([No X toolkit could be found.
If you are sure you want Emacs compiled without an X toolkit, pass
  --with-x-toolkit=no
to configure.  Otherwise, install the development libraries for the toolkit
that you want to use (e.g. Gtk+) and re-run configure.])
    fi
  fi
fi

X_TOOLKIT_TYPE=$USE_X_TOOLKIT

LIBXTR6=
LIBXMU=
if test "${USE_X_TOOLKIT}" != "none"; then
  AC_MSG_CHECKING(X11 toolkit version)
  AC_CACHE_VAL(emacs_cv_x11_toolkit_version_6,
  [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <X11/Intrinsic.h>]],
[[#if XtSpecificationRelease < 6
fail;
#endif
]])], emacs_cv_x11_toolkit_version_6=yes, emacs_cv_x11_toolkit_version_6=no)])
  HAVE_X11XTR6=$emacs_cv_x11_toolkit_version_6
  if test $emacs_cv_x11_toolkit_version_6 = yes; then
    AC_MSG_RESULT(6 or newer)
    AC_DEFINE(HAVE_X11XTR6, 1,
	      [Define to 1 if you have the X11R6 or newer version of Xt.])
    LIBXTR6="-lSM -lICE"
    case "$opsys" in
      ## Use libw.a along with X11R6 Xt.
      unixware) LIBXTR6="$LIBXTR6 -lw" ;;
    esac
  else
    AC_MSG_RESULT(before 6)
  fi

dnl If using toolkit, check whether libXmu.a exists.
dnl tranle@intellicorp.com says libXmu.a can need XtMalloc in libXt.a to link.
  OLDLIBS="$LIBS"
  if test x$HAVE_X11XTR6 = xyes; then
    OTHERLIBS='-lXt -lSM -lICE'
  else
    OTHERLIBS='-lXt'
  fi
  AC_SEARCH_LIBS([XmuConvertStandardSelection], [Xmu], [], [], [$OTHERLIBS])
  if test "X$LIBS" != "X$OLDLIBS"; then
    LIBXMU=$ac_cv_search_XmuConvertStandardSelection
  fi
  LIBS=$OLDLIBS
  dnl ac_cv_search_XmuConvertStandardSelection is also referenced below.
fi
AC_SUBST(LIBXTR6)
AC_SUBST(LIBXMU)

LIBXP=
if test "${USE_X_TOOLKIT}" = "MOTIF"; then
  # OpenMotif may be installed in such a way on some GNU/Linux systems.
  if test -d /usr/include/openmotif; then
    CPPFLAGS="-I/usr/include/openmotif $CPPFLAGS"
    emacs_cv_openmotif=yes
    case "$canonical" in
      x86_64-*-linux-gnu* | powerpc64-*-linux-gnu* | sparc64-*-linux-gnu*)
      test -d /usr/lib64/openmotif && LDFLAGS="-L/usr/lib64/openmotif $LDFLAGS"
      ;;
      *)
      test -d /usr/lib/openmotif && LDFLAGS="-L/usr/lib/openmotif $LDFLAGS"
    esac
  else
    emacs_cv_openmotif=no
  fi
  AC_CACHE_CHECK(for (Open)Motif version 2.1, emacs_cv_motif_version_2_1,
  [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <Xm/Xm.h>]],
    [[#if XmVERSION > 2 || (XmVERSION == 2 && XmREVISION >= 1)
int x = 5;
#else
Motif version prior to 2.1.
#endif]])],
    emacs_cv_motif_version_2_1=yes, emacs_cv_motif_version_2_1=no)])
  if test $emacs_cv_motif_version_2_1 = yes; then
    AC_CHECK_LIB(Xp, XpCreateContext, LIBXP=-lXp)
    if test x$emacs_cv_openmotif = xyes; then
      REAL_CPPFLAGS="-I/usr/include/openmotif $REAL_CPPFLAGS"
    fi
  else
    AC_CACHE_CHECK(for LessTif where some systems put it, emacs_cv_lesstif,
    # We put this in CFLAGS temporarily to precede other -I options
    # that might be in CFLAGS temporarily.
    # We put this in CPPFLAGS where it precedes the other -I options.
    OLD_CPPFLAGS=$CPPFLAGS
    OLD_CFLAGS=$CFLAGS
    CPPFLAGS="-I/usr/X11R6/LessTif/Motif1.2/include $CPPFLAGS"
    CFLAGS="-I/usr/X11R6/LessTif/Motif1.2/include $CFLAGS"
    [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include </usr/X11R6/LessTif/Motif1.2/include/Xm/Xm.h>]],
      [[int x = 5;]])],
      emacs_cv_lesstif=yes, emacs_cv_lesstif=no)])
    if test $emacs_cv_lesstif = yes; then
      # Make sure this -I option remains in CPPFLAGS after it is set
      # back to REAL_CPPFLAGS.
      # There is no need to change REAL_CFLAGS, because REAL_CFLAGS does not
      # have those other -I options anyway.  Ultimately, having this
      # directory ultimately in CPPFLAGS will be enough.
      REAL_CPPFLAGS="-I/usr/X11R6/LessTif/Motif1.2/include $REAL_CPPFLAGS"
      LDFLAGS="-L/usr/X11R6/LessTif/Motif1.2/lib $LDFLAGS"
    else
      CFLAGS=$OLD_CFLAGS
      CPPFLAGS=$OLD_CPPFLAGS
    fi
  fi
  AC_CHECK_HEADER([Xm/BulletinB.h], [],
    [AC_MSG_ERROR([Motif toolkit requested but requirements not found.])])
fi

dnl Use toolkit scroll bars if configured for GTK or X toolkit and either
dnl using Motif or Xaw3d is available, and unless
dnl --with-toolkit-scroll-bars=no was specified.

AH_TEMPLATE(USE_TOOLKIT_SCROLL_BARS,
	    [Define to 1 if we should use toolkit scroll bars.])dnl
USE_TOOLKIT_SCROLL_BARS=no
if test "${with_toolkit_scroll_bars}" != "no"; then
  if test "${USE_X_TOOLKIT}" != "none"; then
    if test "${USE_X_TOOLKIT}" = "MOTIF"; then
      AC_DEFINE(USE_TOOLKIT_SCROLL_BARS)
      HAVE_XAW3D=no
      USE_TOOLKIT_SCROLL_BARS=yes
    elif test "${HAVE_XAW3D}" = "yes" || test "${USE_X_TOOLKIT}" = "LUCID"; then
      AC_DEFINE(USE_TOOLKIT_SCROLL_BARS)
      USE_TOOLKIT_SCROLL_BARS=yes
    fi
  elif test "${HAVE_GTK}" = "yes"; then
    AC_DEFINE(USE_TOOLKIT_SCROLL_BARS)
    USE_TOOLKIT_SCROLL_BARS=yes
  elif test "${HAVE_NS}" = "yes"; then
    AC_DEFINE(USE_TOOLKIT_SCROLL_BARS)
    USE_TOOLKIT_SCROLL_BARS=yes
  elif test "${HAVE_W32}" = "yes"; then
    AC_DEFINE(USE_TOOLKIT_SCROLL_BARS)
    USE_TOOLKIT_SCROLL_BARS=yes
  fi
fi

dnl See if XIM is available.
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
	  #include <X11/Xlib.h>
	  #include <X11/Xresource.h>]],
	 [[XIMProc  callback;]])],
	 [HAVE_XIM=yes
	 AC_DEFINE(HAVE_XIM, 1, [Define to 1 if XIM is available])],
	 HAVE_XIM=no)

dnl `--with-xim' now controls only the initial value of use_xim at run time.

if test "${with_xim}" != "no"; then
  AC_DEFINE(USE_XIM, 1,
	    [Define to 1 if we should use XIM, if it is available.])
fi


if test "${HAVE_XIM}" != "no"; then
  late_CFLAGS=$CFLAGS
  if test "$GCC" = yes; then
    CFLAGS="$CFLAGS --pedantic-errors"
  fi
  AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
#include <X11/Xlib.h>
#include <X11/Xresource.h>]],
[[Display *display;
XrmDatabase db;
char *res_name;
char *res_class;
XIMProc  callback;
XPointer *client_data;
#ifndef __GNUC__
/* If we're not using GCC, it's probably not XFree86, and this is
   probably right, but we can't use something like --pedantic-errors.  */
extern Bool XRegisterIMInstantiateCallback(Display*, XrmDatabase, char*,
                                           char*, XIMProc, XPointer*);
#endif
(void)XRegisterIMInstantiateCallback(display, db, res_name, res_class, callback,
   client_data);]])],
    [emacs_cv_arg6_star=yes])
  AH_TEMPLATE(XRegisterIMInstantiateCallback_arg6,
         [Define to the type of the 6th arg of XRegisterIMInstantiateCallback,
either XPointer or XPointer*.])dnl
  if test "$emacs_cv_arg6_star" = yes; then
    AC_DEFINE(XRegisterIMInstantiateCallback_arg6, [XPointer*])
  else
    AC_DEFINE(XRegisterIMInstantiateCallback_arg6, [XPointer])
  fi
  CFLAGS=$late_CFLAGS
fi

### Start of font-backend (under any platform) section.
# (nothing here yet -- this is a placeholder)
### End of font-backend (under any platform) section.

### Start of font-backend (under X11) section.
if test "${HAVE_X11}" = "yes"; then
    ## Use -lXft if available, unless `--with-xft=no'.
    HAVE_XFT=maybe
    if test "x${with_x}" = "xno"; then
      with_xft="no";
    fi

    if test "$with_xft" != no; then
      EMACS_CHECK_MODULES([FONTCONFIG], [fontconfig >= 2.2.0])
      with_xft=$HAVE_FONTCONFIG
    fi

    if test "x${with_xft}" != "xno"; then

      EMACS_CHECK_MODULES([XFT], [xft >= 0.13.0], [], [HAVE_XFT=no])
      ## Because xftfont.c uses XRenderQueryExtension, we also
      ## need to link to -lXrender.
      HAVE_XRENDER=no
      AC_CHECK_LIB(Xrender, XRenderQueryExtension, HAVE_XRENDER=yes)
      if test "$HAVE_XFT" != no && test "$HAVE_XRENDER" != no; then
	OLD_CPPFLAGS="$CPPFLAGS"
	OLD_CFLAGS="$CFLAGS"
	OLD_LIBS="$LIBS"
	CPPFLAGS="$CPPFLAGS $XFT_CFLAGS"
	CFLAGS="$CFLAGS $XFT_CFLAGS"
	XFT_LIBS="-lXrender $XFT_LIBS"
	LIBS="$XFT_LIBS $LIBS"
	AC_CHECK_HEADER(X11/Xft/Xft.h,
	  AC_CHECK_LIB(Xft, XftFontOpen, HAVE_XFT=yes, , $XFT_LIBS) , ,
          [[#include <X11/X.h>]])

	if test "${HAVE_XFT}" = "yes"; then
	  AC_DEFINE(HAVE_XFT, 1, [Define to 1 if you have the Xft library.])
	    AC_SUBST(XFT_LIBS)
	  C_SWITCH_X_SITE="$C_SWITCH_X_SITE $XFT_CFLAGS"
	fi                        # "${HAVE_XFT}" = "yes"
	CPPFLAGS=$OLD_CPPFLAGS
	CFLAGS=$OLD_CFLAGS
	LIBS=$OLD_LIBS
      fi                          # "$HAVE_XFT" != no
    fi                            # "x${with_xft}" != "xno"

    ## We used to allow building with FreeType and without Xft.
    ## However, the ftx font backend driver is not in good shape.
    if test "$HAVE_XFT" != "yes"; then
       dnl For the "Does Emacs use" message at the end.
       HAVE_XFT=no
       HAVE_FREETYPE=no
    else
       dnl Strict linkers fail with
       dnl ftfont.o: undefined reference to symbol 'FT_New_Face'
       dnl if -lfreetype is not specified.
       dnl The following is needed to set FREETYPE_LIBS.
       EMACS_CHECK_MODULES([FREETYPE], [freetype2])

       test "$HAVE_FREETYPE" = "no" && AC_MSG_ERROR(libxft requires libfreetype)
    fi

    HAVE_LIBOTF=no
    if test "${HAVE_FREETYPE}" = "yes"; then
      AC_DEFINE(HAVE_FREETYPE, 1,
		[Define to 1 if using the freetype and fontconfig libraries.])
      if test "${with_libotf}" != "no"; then
	EMACS_CHECK_MODULES([LIBOTF], [libotf])
	if test "$HAVE_LIBOTF" = "yes"; then
	  AC_DEFINE(HAVE_LIBOTF, 1, [Define to 1 if using libotf.])
	  AC_CHECK_LIB(otf, OTF_get_variation_glyphs,
		       HAVE_OTF_GET_VARIATION_GLYPHS=yes,
		       HAVE_OTF_GET_VARIATION_GLYPHS=no)
	  if test "${HAVE_OTF_GET_VARIATION_GLYPHS}" = "yes"; then
	    AC_DEFINE(HAVE_OTF_GET_VARIATION_GLYPHS, 1,
		      [Define to 1 if libotf has OTF_get_variation_glyphs.])
	  fi
	fi
      fi
    dnl FIXME should there be an error if HAVE_FREETYPE != yes?
    dnl Does the new font backend require it, or can it work without it?
    fi

    HAVE_M17N_FLT=no
    if test "${HAVE_LIBOTF}" = yes; then
      if test "${with_m17n_flt}" != "no"; then
	EMACS_CHECK_MODULES([M17N_FLT], [m17n-flt])
	if test "$HAVE_M17N_FLT" = "yes"; then
	  AC_DEFINE(HAVE_M17N_FLT, 1, [Define to 1 if using libm17n-flt.])
	fi
      fi
    fi
else
    HAVE_XFT=no
    HAVE_FREETYPE=no
    HAVE_LIBOTF=no
    HAVE_M17N_FLT=no
fi

### End of font-backend (under X11) section.

AC_SUBST(FREETYPE_CFLAGS)
AC_SUBST(FREETYPE_LIBS)
AC_SUBST(FONTCONFIG_CFLAGS)
AC_SUBST(FONTCONFIG_LIBS)
AC_SUBST(LIBOTF_CFLAGS)
AC_SUBST(LIBOTF_LIBS)
AC_SUBST(M17N_FLT_CFLAGS)
AC_SUBST(M17N_FLT_LIBS)

### Use -lXpm if available, unless `--with-xpm=no'.
### mingw doesn't use -lXpm, since it loads the library dynamically.
HAVE_XPM=no
LIBXPM=
if test "${HAVE_W32}" = "yes" && test "${opsys}" = "cygwin"; then
  if test "${with_xpm}" != "no"; then
    SAVE_CPPFLAGS="$CPPFLAGS"
    SAVE_LDFLAGS="$LDFLAGS"
    CPPFLAGS="$CPPFLAGS -I/usr/include/noX"
    LDFLAGS="$LDFLAGS -L/usr/lib/noX"
    AC_CHECK_HEADER(X11/xpm.h,
      [AC_CHECK_LIB(Xpm, XpmReadFileToImage, HAVE_XPM=yes)])
    if test "${HAVE_XPM}" = "yes"; then
      AC_MSG_CHECKING(for XpmReturnAllocPixels preprocessor define)
      AC_EGREP_CPP(no_return_alloc_pixels,
      [#include "X11/xpm.h"
#ifndef XpmReturnAllocPixels
no_return_alloc_pixels
#endif
      ], HAVE_XPM=no, HAVE_XPM=yes)

      if test "${HAVE_XPM}" = "yes"; then
        REAL_CPPFLAGS="$REAL_CPPFLAGS -I/usr/include/noX"
	AC_MSG_RESULT(yes)
      else
	AC_MSG_RESULT(no)
        CPPFLAGS="$SAVE_CPPFLAGS"
        LDFLAGS="$SAVE_LDFLAGS"
      fi
    fi
  fi

  if test "${HAVE_XPM}" = "yes"; then
    AC_DEFINE(HAVE_XPM, 1, [Define to 1 if you have the Xpm library (-lXpm).])
    LIBXPM=-lXpm
  fi
fi

if test "${HAVE_X11}" = "yes"; then
  dnl Avoid Xpm on AIX unless requested, as it crashes; see Bug#17598.
  test "$opsys$with_xpm_set" = aix4-2 && with_xpm=no

  if test "${with_xpm}" != "no"; then
    AC_CHECK_HEADER(X11/xpm.h,
      [AC_CHECK_LIB(Xpm, XpmReadFileToPixmap, HAVE_XPM=yes, , -lX11)])
    if test "${HAVE_XPM}" = "yes"; then
      AC_MSG_CHECKING(for XpmReturnAllocPixels preprocessor define)
      AC_EGREP_CPP(no_return_alloc_pixels,
      [#include "X11/xpm.h"
#ifndef XpmReturnAllocPixels
no_return_alloc_pixels
#endif
      ], HAVE_XPM=no, HAVE_XPM=yes)

      if test "${HAVE_XPM}" = "yes"; then
	AC_MSG_RESULT(yes)
      else
	AC_MSG_RESULT(no)
      fi
    fi
  fi

  if test "${HAVE_XPM}" = "yes"; then
    AC_DEFINE(HAVE_XPM, 1, [Define to 1 if you have the Xpm library (-lXpm).])
    LIBXPM=-lXpm
  elif test "$opsys,$LUCID_LIBW" = aix4-2,-lXaw; then
    dnl AIX -lXaw needs -lXpm linked too; see Bug#17598 Message#152.
    LIBXPM=-lXpm
  fi
fi

### FIXME: Perhaps regroup to minimize code duplication due to MinGW's
### slightly different requirements wrt image libraries (it doesn't
### use -lXpm because it loads the xpm shared library dynamically at
### run time).
if test "${opsys}" = "mingw"; then
  if test "${with_xpm}" != "no"; then
    CPPFLAGS="$CPPFLAGS -I/mingw64/include/noX"
    AC_CHECK_HEADER(X11/xpm.h, HAVE_XPM=yes, HAVE_XPM=no, [
#define FOR_MSW 1])
  fi

  if test "${HAVE_XPM}" = "yes"; then
    REAL_CPPFLAGS="$REAL_CPPFLAGS -I/mingw64/include/noX"
    AC_DEFINE(HAVE_XPM, 1, [Define to 1 if you have the Xpm library (-lXpm).])
  fi
fi

AC_SUBST(LIBXPM)

### Use -ljpeg if available, unless `--with-jpeg=no'.
### mingw doesn't use -ljpeg, since it loads the library dynamically.
HAVE_JPEG=no
LIBJPEG=
if test "${opsys}" = "mingw"; then
  if test "${with_jpeg}" != "no"; then
    dnl Checking for jpeglib.h can lose because of a redefinition of
    dnl HAVE_STDLIB_H.
    AC_CHECK_HEADER(jerror.h, HAVE_JPEG=yes, HAVE_JPEG=no)
  fi
  AH_TEMPLATE(HAVE_JPEG, [Define to 1 if you have the jpeg library (-ljpeg).])dnl
  if test "${HAVE_JPEG}" = "yes"; then
    AC_DEFINE(HAVE_JPEG)
    AC_EGREP_CPP([version= *(6[2-9]|[7-9][0-9])],
        [#include <jpeglib.h>
	 version=JPEG_LIB_VERSION
],
        [AC_DEFINE(HAVE_JPEG)],
        [AC_MSG_WARN([libjpeg found, but not version 6b or later])
        HAVE_JPEG=no])
  fi
elif test "${HAVE_X11}" = "yes" || test "${HAVE_W32}" = "yes"; then
  if test "${with_jpeg}" != "no"; then
    dnl Checking for jpeglib.h can lose because of a redefinition of
    dnl  HAVE_STDLIB_H.
    AC_CHECK_HEADER(jerror.h,
      [AC_CHECK_LIB(jpeg, jpeg_destroy_compress, HAVE_JPEG=yes)])
  fi

  AH_TEMPLATE(HAVE_JPEG, [Define to 1 if you have the jpeg library (-ljpeg).])dnl
  if test "${HAVE_JPEG}" = "yes"; then
    AC_DEFINE(HAVE_JPEG)
    AC_EGREP_CPP([version= *(6[2-9]|[7-9][0-9])],
	[#include <jpeglib.h>
	 version=JPEG_LIB_VERSION
],
	[AC_DEFINE(HAVE_JPEG)],
	[AC_MSG_WARN([libjpeg found, but not version 6b or later])
	HAVE_JPEG=no])
  fi
  if test "${HAVE_JPEG}" = "yes"; then
    LIBJPEG=-ljpeg
  fi
fi
AC_SUBST(LIBJPEG)

HAVE_ZLIB=no
LIBZ=
if test "${with_zlib}" != "no"; then
  OLIBS=$LIBS
  AC_SEARCH_LIBS([inflateEnd], [z], [HAVE_ZLIB=yes])
  LIBS=$OLIBS
  case $ac_cv_search_inflateEnd in
    -*) LIBZ=$ac_cv_search_inflateEnd ;;
  esac
fi
if test "${HAVE_ZLIB}" = "yes"; then
  AC_DEFINE([HAVE_ZLIB], 1, [Define to 1 if you have the zlib library (-lz).])
  ### mingw doesn't use -lz, since it loads the library dynamically.
  if test "${opsys}" = "mingw"; then
     LIBZ=
  fi
fi
AC_SUBST(LIBZ)

### Use -lpng if available, unless `--with-png=no'.
HAVE_PNG=no
LIBPNG=
PNG_CFLAGS=
if test "${NS_IMPL_COCOA}" = yes; then
  : # Nothing to do
elif test "${with_png}" != no; then
  # mingw loads the library dynamically.
  if test "$opsys" = mingw; then
    AC_CHECK_HEADER([png.h], [HAVE_PNG=yes])
  elif test "${HAVE_X11}" = "yes" || test "${HAVE_W32}" = "yes"; then
    AC_MSG_CHECKING([for png])
    png_cflags=`(libpng-config --cflags) 2>&AS_MESSAGE_LOG_FD` &&
    png_libs=`(libpng-config --libs) 2>&AS_MESSAGE_LOG_FD` || {
      # libpng-config does not work; configure by hand.
      # Debian unstable as of July 2003 has multiple libpngs, and puts png.h
      # in /usr/include/libpng.
      if test -r /usr/include/libpng/png.h &&
	 test ! -r /usr/include/png.h; then
	png_cflags=-I/usr/include/libpng
      else
	png_cflags=
      fi
      png_libs='-lpng'
    }
    SAVE_CFLAGS=$CFLAGS
    SAVE_LIBS=$LIBS
    CFLAGS="$CFLAGS $png_cflags"
    LIBS="$png_libs -lz -lm $LIBS"
    AC_LINK_IFELSE(
      [AC_LANG_PROGRAM([[#include <png.h>]],
	 [[return !png_get_channels (0, 0);]])],
      [HAVE_PNG=yes
       PNG_CFLAGS=`AS_ECHO(["$png_cflags"]) | sed -e "$edit_cflags"`
       LIBPNG=$png_libs
       # $LIBPNG requires explicit -lz in some cases.
       # We don't know what those cases are, exactly, so play it safe and
       # append -lz to any nonempty $LIBPNG, unless we're already using LIBZ.
       if test -n "$LIBPNG" && test -z "$LIBZ"; then
	 LIBPNG="$LIBPNG -lz"
       fi])
    CFLAGS=$SAVE_CFLAGS
    LIBS=$SAVE_LIBS
    AC_MSG_RESULT([$HAVE_PNG])
  fi
fi
if test $HAVE_PNG = yes; then
  AC_DEFINE([HAVE_PNG], [1], [Define to 1 if you have the png library.])

  SAVE_CFLAGS=$CFLAGS
  CFLAGS="$CFLAGS $PNG_CFLAGS"
  AC_CHECK_DECL([png_longjmp],
    [],
    [AC_DEFINE([PNG_DEPSTRUCT], [],
       [Define to empty to suppress deprecation warnings when building
	with --enable-gcc-warnings and with libpng versions before 1.5,
	which lack png_longjmp.])],
    [[#include <png.h>
    ]])
  CFLAGS=$SAVE_CFLAGS
fi
AC_SUBST(LIBPNG)
AC_SUBST(PNG_CFLAGS)

### Use -ltiff if available, unless `--with-tiff=no'.
### mingw doesn't use -ltiff, since it loads the library dynamically.
HAVE_TIFF=no
LIBTIFF=
if test "${opsys}" = "mingw"; then
  if test "${with_tiff}" != "no"; then
    AC_CHECK_HEADER(tiffio.h, HAVE_TIFF=yes, HAVE_TIFF=no)
  fi
  if test "${HAVE_TIFF}" = "yes"; then
    AC_DEFINE(HAVE_TIFF, 1, [Define to 1 if you have the tiff library (-ltiff).])
  fi
elif test "${HAVE_X11}" = "yes" || test "${HAVE_W32}" = "yes"; then
  if test "${with_tiff}" != "no"; then
    AC_CHECK_HEADER(tiffio.h,
      [tifflibs="-lz -lm"
      # At least one tiff package requires the jpeg library.
      if test "${HAVE_JPEG}" = yes; then tifflibs="-ljpeg $tifflibs"; fi
      AC_CHECK_LIB(tiff, TIFFGetVersion, HAVE_TIFF=yes, , $tifflibs)])
  fi

  if test "${HAVE_TIFF}" = "yes"; then
    AC_DEFINE(HAVE_TIFF, 1, [Define to 1 if you have the tiff library (-ltiff).])
    dnl FIXME -lz -lm, as per libpng?
    LIBTIFF=-ltiff
  fi
fi
AC_SUBST(LIBTIFF)

### Use -lgif or -lungif if available, unless `--with-gif=no'.
### mingw doesn't use -lgif/-lungif, since it loads the library dynamically.
HAVE_GIF=no
LIBGIF=
if test "${opsys}" = "mingw"; then
  if test "${with_gif}" != "no"; then
    AC_CHECK_HEADER(gif_lib.h, HAVE_GIF=yes, HAVE_GIF=no)
  fi
  if test "${HAVE_GIF}" = "yes"; then
    AC_DEFINE(HAVE_GIF, 1, [Define to 1 if you have a gif (or ungif) library.])
  fi
elif test "${HAVE_X11}" = "yes" && test "${with_gif}" != "no" \
        || test "${HAVE_W32}" = "yes"; then
  AC_CHECK_HEADER(gif_lib.h,
# EGifPutExtensionLast only exists from version libungif-4.1.0b1.
# Earlier versions can crash Emacs, but version 5.0 removes EGifPutExtensionLast.
    [AC_CHECK_LIB(gif, GifMakeMapObject, HAVE_GIF=yes,
        [AC_CHECK_LIB(gif, EGifPutExtensionLast, HAVE_GIF=yes, HAVE_GIF=maybe)])])

  if test "$HAVE_GIF" = yes; then
    LIBGIF=-lgif
  elif test "$HAVE_GIF" = maybe; then
# If gif_lib.h but no libgif, try libungif.
    AC_CHECK_LIB(ungif, EGifPutExtensionLast, HAVE_GIF=yes, HAVE_GIF=no)
    test "$HAVE_GIF" = yes && LIBGIF=-lungif
  fi

  if test "${HAVE_GIF}" = "yes"; then
    AC_DEFINE(HAVE_GIF, 1, [Define to 1 if you have a gif (or ungif) library.])
  fi
fi
AC_SUBST(LIBGIF)

dnl Check for required libraries.
if test "${HAVE_X11}" = "yes"; then
  MISSING=""
  WITH_NO=""
  test "${with_xpm}" != "no" && test "${HAVE_XPM}" != "yes" &&
    MISSING="libXpm" && WITH_NO="--with-xpm=no"
  test "${with_jpeg}" != "no" && test "${HAVE_JPEG}" != "yes" &&
    MISSING="$MISSING libjpeg" && WITH_NO="$WITH_NO --with-jpeg=no"
  test "${with_png}" != "no" && test "${HAVE_PNG}" != "yes" &&
    MISSING="$MISSING libpng" && WITH_NO="$WITH_NO --with-png=no"
  test "${with_gif}" != "no" && test "${HAVE_GIF}" != "yes" &&
    MISSING="$MISSING libgif/libungif" && WITH_NO="$WITH_NO --with-gif=no"
  test "${with_tiff}" != "no" && test "${HAVE_TIFF}" != "yes" &&
    MISSING="$MISSING libtiff" && WITH_NO="$WITH_NO --with-tiff=no"

  if test "X${MISSING}" != X; then
    AC_MSG_ERROR([The following required libraries were not found:
    $MISSING
Maybe some development libraries/packages are missing?
If you don't want to link with them give
    $WITH_NO
as options to configure])
  fi
fi

### Use -lgpm if available, unless `--with-gpm=no'.
HAVE_GPM=no
LIBGPM=
if test "${with_gpm}" != "no"; then
  AC_CHECK_HEADER(gpm.h,
    [AC_CHECK_LIB(gpm, Gpm_Open, HAVE_GPM=yes)])

  if test "${HAVE_GPM}" = "yes"; then
    AC_DEFINE(HAVE_GPM, 1, [Define to 1 if you have the gpm library (-lgpm).])
    LIBGPM=-lgpm
  fi
fi
AC_SUBST(LIBGPM)

dnl Check for malloc/malloc.h on darwin
AC_CHECK_HEADERS_ONCE(malloc/malloc.h)

GNUSTEP_CFLAGS=
### Use NeXTstep API to implement GUI.
if test "${HAVE_NS}" = "yes"; then
  AC_DEFINE(HAVE_NS, 1, [Define to 1 if you are using the NeXTstep API, either GNUstep or Cocoa on Mac OS X.])
  if test "${NS_IMPL_COCOA}" = "yes"; then
    AC_DEFINE(NS_IMPL_COCOA, 1, [Define to 1 if you are using NS windowing under MacOS X.])
  fi
  if test "${NS_IMPL_GNUSTEP}" = "yes"; then
    AC_DEFINE(NS_IMPL_GNUSTEP, 1, [Define to 1 if you are using NS windowing under GNUstep.])
    # See also .m.o rule in Makefile.in */
    # FIXME: are all these flags really needed?  Document here why.  */
    GNUSTEP_CFLAGS="-D_REENTRANT -fPIC -fno-strict-aliasing -I${GNUSTEP_SYSTEM_HEADERS} ${GNUSTEP_LOCAL_HEADERS}"
    ## Extra CFLAGS applied to src/*.m files.
    GNU_OBJC_CFLAGS="$GNU_OBJC_CFLAGS -fgnu-runtime -Wno-import -fconstant-string-class=NSConstantString -DGNUSTEP_BASE_LIBRARY=1 -DGNU_GUI_LIBRARY=1 -DGNU_RUNTIME=1 -DGSWARN -DGSDIAGNOSE"
  fi
  OTHER_FILES=ns-app
fi

### Use session management (-lSM -lICE) if available
HAVE_X_SM=no
LIBXSM=
if test "${HAVE_X11}" = "yes"; then
  AC_CHECK_HEADER(X11/SM/SMlib.h,
    [AC_CHECK_LIB(SM, SmcOpenConnection, HAVE_X_SM=yes, , -lICE)])

  if test "${HAVE_X_SM}" = "yes"; then
    AC_DEFINE(HAVE_X_SM, 1, [Define to 1 if you have the SM library (-lSM).])
    LIBXSM="-lSM -lICE"
  fi
fi
AC_SUBST(LIBXSM)

### Use XRandr (-lXrandr) if available
HAVE_XRANDR=no
if test "${HAVE_X11}" = "yes"; then
  XRANDR_REQUIRED=1.2.2
  XRANDR_MODULES="xrandr >= $XRANDR_REQUIRED"
  EMACS_CHECK_MODULES([XRANDR], [$XRANDR_MODULES])
  if test $HAVE_XRANDR = no; then
    # Test old way in case pkg-config doesn't have it (older machines).
    AC_CHECK_HEADER(X11/extensions/Xrandr.h,
      [AC_CHECK_LIB(Xrandr, XRRGetScreenResources, HAVE_XRANDR=yes)])
    if test $HAVE_XRANDR = yes; then
      XRANDR_LIBS=-lXrandr
    fi
  fi
  if test $HAVE_XRANDR = yes; then
    SAVE_CFLAGS="$CFLAGS"
    SAVE_LIBS="$LIBS"
    CFLAGS="$XRANDR_CFLAGS $CFLAGS"
    LIBS="$XRANDR_LIBS $LIBS"
    AC_CHECK_FUNCS(XRRGetOutputPrimary XRRGetScreenResourcesCurrent)
    CFLAGS="$SAVE_CFLAGS"
    LIBS="$SAVE_LIBS"

    AC_DEFINE(HAVE_XRANDR, 1, [Define to 1 if you have the XRandr extension.])
  fi
fi
AC_SUBST(XRANDR_CFLAGS)
AC_SUBST(XRANDR_LIBS)

### Use Xinerama (-lXinerama) if available
HAVE_XINERAMA=no
if test "${HAVE_X11}" = "yes"; then
  XINERAMA_REQUIRED=1.0.2
  XINERAMA_MODULES="xinerama >= $XINERAMA_REQUIRED"
  EMACS_CHECK_MODULES([XINERAMA], [$XINERAMA_MODULES])
  if test $HAVE_XINERAMA = no; then
    # Test old way in case pkg-config doesn't have it (older machines).
    AC_CHECK_HEADER(X11/extensions/Xinerama.h,
      [AC_CHECK_LIB(Xinerama, XineramaQueryExtension, HAVE_XINERAMA=yes)])
    if test $HAVE_XINERAMA = yes; then
      XINERAMA_LIBS=-lXinerama
    fi
  fi
  if test $HAVE_XINERAMA = yes; then
    AC_DEFINE(HAVE_XINERAMA, 1, [Define to 1 if you have the Xinerama extension.])
  fi
fi
AC_SUBST(XINERAMA_CFLAGS)
AC_SUBST(XINERAMA_LIBS)

### Use Xfixes (-lXfixes) if available
HAVE_XFIXES=no
if test "${HAVE_X11}" = "yes"; then
  XFIXES_REQUIRED=4.0.0
  XFIXES_MODULES="xfixes >= $XFIXES_REQUIRED"
  EMACS_CHECK_MODULES([XFIXES], [$XFIXES_MODULES])
  if test $HAVE_XFIXES = no; then
    # Test old way in case pkg-config doesn't have it (older machines).
    AC_CHECK_HEADER(X11/extensions/Xfixes.h,
      [AC_CHECK_LIB(Xfixes, XFixesHideCursor, HAVE_XFIXES=yes)])
    if test $HAVE_XFIXES = yes; then
      XFIXES_LIBS=-lXfixes
    fi
  fi
  if test $HAVE_XFIXES = yes; then
    AC_DEFINE(HAVE_XFIXES, 1, [Define to 1 if you have the Xfixes extension.])
  fi
fi
AC_SUBST(XFIXES_CFLAGS)
AC_SUBST(XFIXES_LIBS)

### Use libxml (-lxml2) if available
### mingw doesn't use -lxml2, since it loads the library dynamically.
HAVE_LIBXML2=no
if test "${with_xml2}" != "no"; then
  ### I'm not sure what the version number should be, so I just guessed.
  EMACS_CHECK_MODULES([LIBXML2], [libxml-2.0 > 2.6.17])
  # Built-in libxml2 on OS X 10.8 lacks libxml-2.0.pc.
  if test "${HAVE_LIBXML2}" != "yes" -a "$opsys" = "darwin"; then
    SAVE_CPPFLAGS="$CPPFLAGS"
    CPPFLAGS="$CPPFLAGS -I$xcsdkdir/usr/include/libxml2"
    AC_CHECK_HEADER(libxml/HTMLparser.h,
      [AC_CHECK_DECL(HTML_PARSE_RECOVER, HAVE_LIBXML2=yes, ,
      		     [#include <libxml/HTMLparser.h>])])
    CPPFLAGS="$SAVE_CPPFLAGS"
    if test "${HAVE_LIBXML2}" = "yes"; then
      LIBXML2_CFLAGS="-I'$xcsdkdir/usr/include/libxml2'"
      LIBXML2_LIBS="-lxml2"
    fi
  fi
  if test "${HAVE_LIBXML2}" = "yes"; then
    if test "${opsys}" != "mingw"; then
      AC_CHECK_LIB(xml2, htmlReadMemory, HAVE_LIBXML2=yes, HAVE_LIBXML2=no
        [$LIBXML2_LIBS])
    else
      LIBXML2_LIBS=""
    fi
    if test "${HAVE_LIBXML2}" = "yes"; then
      AC_DEFINE(HAVE_LIBXML2, 1, [Define to 1 if you have the libxml library (-lxml2).])
    else
      LIBXML2_LIBS=""
      LIBXML2_CFLAGS=""
    fi
  fi
fi
AC_SUBST(LIBXML2_LIBS)
AC_SUBST(LIBXML2_CFLAGS)

# If netdb.h doesn't declare h_errno, we must declare it by hand.
# On MinGW, that is provided by nt/inc/sys/socket.h and w32.c.
if test "${opsys}" = "mingw"; then
  emacs_cv_netdb_declares_h_errno=yes
fi
AC_CACHE_CHECK(whether netdb declares h_errno,
	       emacs_cv_netdb_declares_h_errno,
[AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <netdb.h>]],
  [[return h_errno;]])],
  emacs_cv_netdb_declares_h_errno=yes, emacs_cv_netdb_declares_h_errno=no)])
if test $emacs_cv_netdb_declares_h_errno = yes; then
  AC_DEFINE(HAVE_H_ERRNO, 1, [Define to 1 if netdb.h declares h_errno.])
fi

# Check for mail-locking functions in a "mail" library.  Probably this should
# have the same check as for liblockfile below.
AC_CHECK_LIB(mail, maillock, have_mail=yes, have_mail=no)
if test $have_mail = yes; then
  LIBS_MAIL=-lmail
  AC_DEFINE(HAVE_LIBMAIL, 1, [Define to 1 if you have the `mail' library (-lmail).])

  OLD_LIBS=$LIBS
  LIBS="$LIBS_MAIL $LIBS"
  AC_CHECK_FUNCS(touchlock)
  LIBS=$OLD_LIBS
else
  LIBS_MAIL=
fi
dnl Debian, at least:
AC_CHECK_LIB(lockfile, maillock, have_lockfile=yes, have_lockfile=no)
if test $have_lockfile = yes; then
   LIBS_MAIL=-llockfile
   AC_DEFINE(HAVE_LIBLOCKFILE, 1, [Define to 1 if you have the `lockfile' library (-llockfile).])
else
# If we have the shared liblockfile, assume we must use it for mail
# locking (e.g. Debian).  If we couldn't link against liblockfile
# (no liblockfile.a installed), ensure that we don't need to.
  dnl This works for files generally, not just executables.
  dnl Should we look elsewhere for it?  Maybe examine /etc/ld.so.conf?
  AC_CHECK_PROG(liblockfile, liblockfile.so, yes, no,
                /usr/lib:/lib:/usr/local/lib:$LD_LIBRARY_PATH)
  if test $ac_cv_prog_liblockfile = yes; then
    AC_MSG_ERROR([Shared liblockfile found but can't link against it.
This probably means that movemail could lose mail.
There may be a `development' package to install containing liblockfile.])
  fi
fi
AC_CHECK_HEADERS_ONCE(maillock.h)
AC_SUBST(LIBS_MAIL)

## Define MAIL_USE_FLOCK (or LOCKF) if the mailer uses flock (or lockf) to
## interlock access to the mail spool.  The alternative is a lock file named
## /usr/spool/mail/$USER.lock.
mail_lock=no
case "$opsys" in
  aix4-2) mail_lock="lockf" ;;

  gnu|freebsd|dragonfly|netbsd|openbsd|darwin|irix6-5) mail_lock="flock" ;;

  ## On GNU/Linux systems, both methods are used by various mail programs.
  ## I assume most people are using newer mailers that have heard of flock.
  ## Change this if you need to.
  ## Debian contains a patch which says: ``On Debian/GNU/Linux systems,
  ## configure gets the right answers, and that means *NOT* using flock.
  ## Using flock is guaranteed to be the wrong thing. See Debian Policy
  ## for details.'' and then uses `#ifdef DEBIAN'.  Unfortunately the
  ## Debian maintainer hasn't provided a clean fix for Emacs.
  ## movemail.c will use `maillock' when MAILDIR, HAVE_LIBMAIL and
  ## HAVE_MAILLOCK_H are defined, so the following appears to be the
  ## correct logic.  -- fx
  ## We must check for HAVE_LIBLOCKFILE too, as movemail does.
  ## liblockfile is a Free Software replacement for libmail, used on
  ## Debian systems and elsewhere. -rfr.
  gnu-*)
    mail_lock="flock"
    if test $have_mail = yes || test $have_lockfile = yes; then
      test $ac_cv_header_maillock_h = yes && mail_lock=no
    fi
    ;;

  mingw)
    mail_lock="none-needed" ;;
esac

BLESSMAIL_TARGET=
case "$mail_lock" in
  flock) AC_DEFINE(MAIL_USE_FLOCK, 1, [Define if the mailer uses flock to interlock the mail spool.]) ;;

  lockf) AC_DEFINE(MAIL_USE_LOCKF, 1, [Define if the mailer uses lockf to interlock the mail spool.]) ;;

  none-needed) ;;

  *) BLESSMAIL_TARGET="need-blessmail" ;;
esac
AC_SUBST(BLESSMAIL_TARGET)

OLD_LIBS=$LIBS
LIBS="$LIB_PTHREAD $LIB_MATH $LIBS"
AC_CHECK_FUNCS(accept4 fchdir gethostname \
getrusage get_current_dir_name \
lrand48 random rint \
select getpagesize setlocale \
getrlimit setrlimit shutdown getaddrinfo \
pthread_sigmask strsignal setitimer \
sendto recvfrom getsockname getpeername getifaddrs freeifaddrs \
gai_strerror sync \
getpwent endpwent getgrent endgrent \
cfmakeraw cfsetspeed copysign __executable_start log2)
LIBS=$OLD_LIBS

dnl No need to check for aligned_alloc and posix_memalign if using
dnl gmalloc.o, as it supplies them.  Don't use these functions on
dnl Darwin as they are incompatible with unexmacosx.c.
if test -z "$GMALLOC_OBJ" && test "$opsys" != darwin; then
  AC_CHECK_FUNCS([aligned_alloc posix_memalign], [break])
fi

dnl Cannot use AC_CHECK_FUNCS
AC_CACHE_CHECK([for __builtin_unwind_init],
	       emacs_cv_func___builtin_unwind_init,
[AC_LINK_IFELSE([AC_LANG_PROGRAM([], [__builtin_unwind_init ();])],
		emacs_cv_func___builtin_unwind_init=yes,
		emacs_cv_func___builtin_unwind_init=no)])
if test $emacs_cv_func___builtin_unwind_init = yes; then
  AC_DEFINE(HAVE___BUILTIN_UNWIND_INIT, 1,
	    [Define to 1 if you have the `__builtin_unwind_init' function.])
fi

AC_CHECK_HEADERS_ONCE(sys/un.h)

AC_FUNC_FSEEKO

# UNIX98 PTYs.
AC_CHECK_FUNCS(grantpt)

# PTY-related GNU extensions.
AC_CHECK_FUNCS(getpt posix_openpt)

# Check this now, so that we will NOT find the above functions in ncurses.
# That is because we have not set up to link ncurses in lib-src.
# It's better to believe a function is not available
# than to expect to find it in ncurses.
# Also we need tputs and friends to be able to build at all.
AC_MSG_CHECKING([for library containing tputs])
# Run a test program that contains a call to tputs, a call that is
# never executed.  This tests whether a pre-'main' dynamic linker
# works with the library.  It's too much trouble to actually call
# tputs in the test program, due to portability hassles.  When
# cross-compiling, assume the test program will run if it links.
AC_DEFUN([tputs_link_source], [
  AC_LANG_SOURCE(
     [[extern void tputs (const char *, int, int (*)(int));
       int main (int argc, char **argv)
       {
	  if (argc == 10000)
	    tputs (argv[0], 0, 0);
	  return 0;
       }]])
])
if test "${opsys}" = "mingw"; then
  msg='none required'
else
  # Maybe curses should be tried earlier?
  # See http://debbugs.gnu.org/cgi/bugreport.cgi?bug=9736#35
  for tputs_library in '' tinfo ncurses terminfo termcap curses; do
    OLIBS=$LIBS
    if test -z "$tputs_library"; then
      LIBS_TERMCAP=
      msg='none required'
    else
      LIBS_TERMCAP=-l$tputs_library
      msg=$LIBS_TERMCAP
      LIBS="$LIBS_TERMCAP $LIBS"
    fi
    AC_RUN_IFELSE([tputs_link_source], [], [msg=no],
      [AC_LINK_IFELSE([tputs_link_source], [], [msg=no])])
    LIBS=$OLIBS
    if test "X$msg" != Xno; then
      break
    fi
  done
fi
AC_MSG_RESULT([$msg])
if test "X$msg" = Xno; then
  AC_MSG_ERROR([The required function `tputs' was not found in any library.
The following libraries were tried (in order):
  libtinfo, libncurses, libterminfo, libtermcap, libcurses
Please try installing whichever of these libraries is most appropriate
for your system, together with its header files.
For example, a libncurses-dev(el) or similar package.])
fi

## Use termcap instead of terminfo?
## Only true for: freebsd < 40000, ms-w32, msdos, netbsd < 599002500.
TERMINFO=yes
## FIXME?  In the cases below where we unconditionally set
## LIBS_TERMCAP="-lncurses", this overrides LIBS_TERMCAP = -ltinfo,
## if that was found above to have tputs.
## Should we use the gnu* logic everywhere?
case "$opsys" in
  ## darwin: Prevents crashes when running Emacs in Terminal.app under 10.2.
  ##  The ncurses library has been moved out of the System framework in
  ##  Mac OS X 10.2.  So if configure detects it, set the command-line
  ##  option to use it.
  darwin) LIBS_TERMCAP="-lncurses" ;;

  gnu*) test -z "$LIBS_TERMCAP" && LIBS_TERMCAP="-lncurses" ;;

  freebsd)
    AC_MSG_CHECKING([whether FreeBSD is new enough to use terminfo])
    AC_CACHE_VAL(emacs_cv_freebsd_terminfo,
    [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <osreldate.h>]],
[[#if __FreeBSD_version < 400000
fail;
#endif
]])], emacs_cv_freebsd_terminfo=yes, emacs_cv_freebsd_terminfo=no)])

    AC_MSG_RESULT($emacs_cv_freebsd_terminfo)

    if test $emacs_cv_freebsd_terminfo = yes; then
      LIBS_TERMCAP="-lncurses"
    else
      TERMINFO=no
      LIBS_TERMCAP="-ltermcap"
    fi
    ;;

  mingw)
    TERMINFO=no
    LIBS_TERMCAP=
    ;;

  netbsd)
    if test "x$LIBS_TERMCAP" != "x-lterminfo"; then
      TERMINFO=no
      LIBS_TERMCAP="-ltermcap"
    fi
    ;;

  openbsd | dragonfly) LIBS_TERMCAP="-lncurses" ;;

  ## hpux: Make sure we get select from libc rather than from libcurses
  ##  because libcurses on HPUX 10.10 has a broken version of select.
  ##  We used to use -lc -lcurses, but this may be cleaner.
  ## FIXME?  But TERMINFO = yes on hpux (it used to be explicitly
  # set that way, now it uses the default).  Isn't this a contradiction?
  hpux*) LIBS_TERMCAP="-ltermcap" ;;

esac

TERMCAP_OBJ=tparam.o
if test $TERMINFO = yes; then
  AC_DEFINE(TERMINFO, 1, [Define to 1 if you use terminfo instead of termcap.])
  TERMCAP_OBJ=terminfo.o
fi
if test "X$LIBS_TERMCAP" = "X-lncurses"; then
  AC_DEFINE(USE_NCURSES, 1, [Define to 1 if you use ncurses.])
fi
AC_SUBST(LIBS_TERMCAP)
AC_SUBST(TERMCAP_OBJ)

# GNU/Linux-specific timer functions.
AC_CACHE_CHECK([for timerfd interface], [emacs_cv_have_timerfd],
  [AC_COMPILE_IFELSE(
     [AC_LANG_PROGRAM([[#include <sys/timerfd.h>
		      ]],
		      [[timerfd_create (CLOCK_REALTIME,
					TFD_CLOEXEC | TFD_NONBLOCK);
			timerfd_settime (0, TFD_TIMER_ABSTIME, 0, 0);]])],
     [emacs_cv_have_timerfd=yes],
     [emacs_cv_have_timerfd=no])])
if test "$emacs_cv_have_timerfd" = yes; then
  AC_DEFINE([HAVE_TIMERFD], 1,
    [Define to 1 if timerfd functions are supported as in GNU/Linux.])
fi

# Do we have res_init, for detecting changes in /etc/resolv.conf?
# On Darwin, res_init appears not to be useful: see bug#562 and
# http://lists.gnu.org/archive/html/emacs-devel/2007-11/msg01467.html
resolv=no

if test $opsys != darwin; then

  AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <netinet/in.h>
#include <arpa/nameser.h>
#include <resolv.h>]],
    [[return res_init();]])],
    have_res_init=yes, have_res_init=no)
  if test "$have_res_init" = no; then
    OLIBS="$LIBS"
    LIBS="$LIBS -lresolv"
    AC_MSG_CHECKING(for res_init with -lresolv)
    AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <netinet/in.h>
#include <arpa/nameser.h>
#include <resolv.h>]],
      [[return res_init();]])],
      have_res_init=yes, have_res_init=no)
    AC_MSG_RESULT($have_res_init)
    if test "$have_res_init" = yes ; then
      resolv=yes
    fi
    LIBS="$OLIBS"
  fi

  if test "$have_res_init" = yes; then
    AC_DEFINE(HAVE_RES_INIT, 1, [Define to 1 if res_init is available.])
  fi
fi                              dnl !darwin

# Do we need the Hesiod library to provide the support routines?
dnl FIXME?  Should we be skipping this on Darwin too?
LIBHESIOD=
if test "$with_hesiod" != no ; then
  # Don't set $LIBS here -- see comments above.  FIXME which comments?
  AC_CHECK_FUNC(res_send, , [AC_CHECK_FUNC(__res_send, ,
     [AC_CHECK_LIB(resolv, res_send, resolv=yes,
		  [AC_CHECK_LIB(resolv, __res_send, resolv=yes)])])])
  if test "$resolv" = yes ; then
    RESOLVLIB=-lresolv
  else
    RESOLVLIB=
  fi
  AC_CHECK_FUNC(hes_getmailhost, , [AC_CHECK_LIB(hesiod, hes_getmailhost,
	hesiod=yes, :, $RESOLVLIB)])

  if test x"$hesiod" = xyes; then
    LIBHESIOD=-lhesiod
  fi
fi
AC_SUBST(LIBHESIOD)

# Do we need libresolv (due to res_init or Hesiod)?
if test "$resolv" = yes && test $opsys != darwin; then
  LIBRESOLV=-lresolv
else
  LIBRESOLV=
fi
AC_SUBST(LIBRESOLV)

# These tell us which Kerberos-related libraries to use.
COM_ERRLIB=
CRYPTOLIB=
KRB5LIB=
DESLIB=
KRB4LIB=

if test "${with_kerberos}" != no; then
  OLD_LIBS=$LIBS
  AC_CHECK_LIB(com_err, com_err, have_com_err=yes, have_com_err=no)
  if test $have_com_err = yes; then
    COM_ERRLIB=-lcom_err
    LIBS="$COM_ERRLIB $LIBS"
  fi
  AC_CHECK_LIB(crypto, mit_des_cbc_encrypt, have_crypto=yes, have_crypto=no)
  if test $have_crypto = yes; then
    CRYPTOLIB=-lcrypto
    LIBS="$CRYPTOLIB $LIBS"
  fi
  AC_CHECK_LIB(k5crypto, mit_des_cbc_encrypt, have_k5crypto=yes, have_k5crypto=no)
  if test $have_k5crypto = yes; then
    CRYPTOLIB=-lk5crypto
    LIBS="$CRYPTOLIB $LIBS"
  fi
  AC_CHECK_LIB(krb5, krb5_init_context, have_krb5=yes, have_krb5=no)
  if test $have_krb5=yes; then
    KRB5LIB=-lkrb5
    LIBS="$KRB5LIB $LIBS"
  fi
  dnl FIXME Simplify.  Does not match 22 logic, thanks to default_off?
  if test "${with_kerberos5}" = no; then
    AC_CHECK_LIB(des425, des_cbc_encrypt, have_des425=yes, have_des425=no )
    if test $have_des425 = yes; then
      DESLIB=-ldes425
      LIBS="$DESLIB $LIBS"
    else
      AC_CHECK_LIB(des, des_cbc_encrypt, have_des=yes, have_des=no)
      if test $have_des = yes; then
        DESLIB=-ldes
        LIBS="$DESLIB $LIBS"
      fi
    fi
    AC_CHECK_LIB(krb4, krb_get_cred, have_krb4=yes, have_krb4=no)
    if test $have_krb4 = yes; then
      KRB4LIB=-lkrb4
      LIBS="$KRB4LIB $LIBS"
    else
      AC_CHECK_LIB(krb, krb_get_cred, have_krb=yes, have_krb=no)
      if test $have_krb = yes; then
        KRB4LIB=-lkrb
        LIBS="$KRB4LIB $LIBS"
      fi
    fi
  fi

  if test "${with_kerberos5}" != no; then
    AC_CHECK_HEADERS(krb5.h,
      [AC_CHECK_MEMBERS([krb5_error.text, krb5_error.e_text],,,
		        [#include <krb5.h>])])
  else
    AC_CHECK_HEADERS(krb.h,,
		     [AC_CHECK_HEADERS(kerberosIV/krb.h,,
				       [AC_CHECK_HEADERS(kerberos/krb.h)])])
  fi
  AC_CHECK_HEADERS(com_err.h)
  LIBS=$OLD_LIBS
fi

AC_SUBST(COM_ERRLIB)
AC_SUBST(CRYPTOLIB)
AC_SUBST(KRB5LIB)
AC_SUBST(DESLIB)
AC_SUBST(KRB4LIB)

AC_CHECK_HEADERS(valgrind/valgrind.h)

AC_CHECK_FUNCS_ONCE(tzset)
AC_MSG_CHECKING(whether localtime caches TZ)
AC_CACHE_VAL(emacs_cv_localtime_cache,
[if test x$ac_cv_func_tzset = xyes; then
AC_RUN_IFELSE([AC_LANG_SOURCE([[#include <time.h>
char TZ_GMT0[] = "TZ=GMT0";
char TZ_PST8[] = "TZ=PST8";
main()
{
  time_t now = time ((time_t *) 0);
  int hour_GMT0, hour_unset;
  if (putenv (TZ_GMT0) != 0)
    exit (1);
  hour_GMT0 = localtime (&now)->tm_hour;
  unsetenv("TZ");
  hour_unset = localtime (&now)->tm_hour;
  if (putenv (TZ_PST8) != 0)
    exit (1);
  if (localtime (&now)->tm_hour == hour_GMT0)
    exit (1);
  unsetenv("TZ");
  if (localtime (&now)->tm_hour != hour_unset)
    exit (1);
  exit (0);
}]])], emacs_cv_localtime_cache=no, emacs_cv_localtime_cache=yes,
[# If we have tzset, assume the worst when cross-compiling.
emacs_cv_localtime_cache=yes])
else
	# If we lack tzset, report that localtime does not cache TZ,
	# since we can't invalidate the cache if we don't have tzset.
	emacs_cv_localtime_cache=no
fi])dnl
AC_MSG_RESULT($emacs_cv_localtime_cache)
if test $emacs_cv_localtime_cache = yes; then
  AC_DEFINE(LOCALTIME_CACHE, 1,
	    [Define to 1 if localtime caches TZ.])
fi

ok_so_far=yes
AC_CHECK_FUNC(socket, , ok_so_far=no)
if test $ok_so_far = yes; then
  AC_CHECK_HEADER(netinet/in.h, , ok_so_far=no)
fi
if test $ok_so_far = yes; then
  AC_CHECK_HEADER(arpa/inet.h, , ok_so_far=no)
fi
if test $ok_so_far = yes; then
dnl Fixme: Not used.  Should this be HAVE_SOCKETS?
  AC_DEFINE(HAVE_INET_SOCKETS, 1,
	    [Define to 1 if you have inet sockets.])
fi

AC_FUNC_FORK

AC_CHECK_FUNCS(snprintf)

dnl Check for glib.  This differs from other library checks in that
dnl Emacs need not link to glib unless some other library is already
dnl linking to glib.  Although glib provides no facilities that Emacs
dnl needs for its own purposes, when glib is present Emacs needs to
dnl use primitives like g_main_context_query to avoid clashing with
dnl glib at a low level.
dnl
dnl Check this late, since it depends on $GTK_CFLAGS etc.
XGSELOBJ=
OLDCFLAGS="$CFLAGS"
OLDLIBS="$LIBS"
CFLAGS="$CFLAGS $GTK_CFLAGS $RSVG_CFLAGS $DBUS_CFLAGS $SETTINGS_CFLAGS"
LIBS="$LIBS $GTK_LIBS $RSVG_LIBS $DBUS_LIBS $SETTINGS_LIBS"
CFLAGS="$CFLAGS $GFILENOTIFY_CFLAGS"
LIBS="$LIBS $GFILENOTIFY_LIBS"
AC_MSG_CHECKING([whether GLib is linked in])
AC_LINK_IFELSE([AC_LANG_PROGRAM(
	[[#include <glib.h>
 	]],
	[[g_print ("Hello world");]])],
     [links_glib=yes],
     [links_glib=no])
AC_MSG_RESULT([$links_glib])
if test "${links_glib}" = "yes"; then
  AC_DEFINE(HAVE_GLIB, 1, [Define to 1 if GLib is linked in.])
  if test "$HAVE_NS" = no;then
    XGSELOBJ=xgselect.o
  fi
fi
CFLAGS="$OLDCFLAGS"
LIBS="$OLDLIBS"
AC_SUBST(XGSELOBJ)

dnl Adapted from Haible's version.
AC_CACHE_CHECK([for nl_langinfo and CODESET], emacs_cv_langinfo_codeset,
  [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <langinfo.h>]],
    [[char* cs = nl_langinfo(CODESET);]])],
    emacs_cv_langinfo_codeset=yes,
    emacs_cv_langinfo_codeset=no)
  ])
if test $emacs_cv_langinfo_codeset = yes; then
  AC_DEFINE(HAVE_LANGINFO_CODESET, 1,
    [Define if you have <langinfo.h> and nl_langinfo(CODESET).])
fi

AC_TYPE_MBSTATE_T

AC_CACHE_CHECK([for C restricted array declarations], emacs_cv_c_restrict_arr,
  [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[void fred (int x[__restrict]);]], [[]])],
                  emacs_cv_c_restrict_arr=yes, emacs_cv_c_restrict_arr=no)])
if test "$emacs_cv_c_restrict_arr" = yes; then
  AC_DEFINE(__restrict_arr, __restrict,
    [Define to compiler's equivalent of C99 restrict keyword in array
     declarations.  Define as empty for no equivalent.])
fi

dnl Fixme: AC_SYS_POSIX_TERMIOS should probably be used, but it's not clear
dnl how the tty code is related to POSIX and/or other versions of termios.
dnl The following looks like a useful start.
dnl
dnl AC_SYS_POSIX_TERMIOS
dnl if test $ac_cv_sys_posix_termios = yes; then
dnl    AC_DEFINE(HAVE_TERMIOS, 1, [Define to 1 if you have POSIX-style functions
dnl                                and macros for terminal control.])
dnl    AC_DEFINE(HAVE_TCATTR, 1, [Define to 1 if you have tcgetattr and tcsetattr.])
dnl fi

dnl Turned on June 1996 supposing nobody will mind it.
dnl MinGW emulates passwd database, so this feature doesn't make sense there.
if test "${opsys}" != "mingw"; then
   AC_DEFINE(AMPERSAND_FULL_NAME, 1, [Define to use the convention that &
     in the full name stands for the login id.])
fi

dnl Everybody supports this, except MS.
dnl Seems like the kind of thing we should be testing for, though.
## Note: PTYs are broken on darwin <6.  Use at your own risk.
if test "${opsys}" != "mingw"; then
  AC_DEFINE(HAVE_PTYS, 1, [Define if the system supports pty devices.])
fi

dnl Everybody supports this, except MS-DOS.
dnl Seems like the kind of thing we should be testing for, though.
dnl Compare with HAVE_INET_SOCKETS (which is unused...) above.
AC_DEFINE(HAVE_SOCKETS, 1, [Define if the system supports
  4.2-compatible sockets.])

AH_TEMPLATE(INTERNAL_TERMINAL, [This is substituted when $TERM is "internal".])

AH_TEMPLATE(NULL_DEVICE, [Name of the file to open to get
  a null file, or a data sink.])
if test "${opsys}" = "mingw"; then
  AC_DEFINE(NULL_DEVICE, ["NUL:"])
else
  AC_DEFINE(NULL_DEVICE, ["/dev/null"])
fi

if test "${opsys}" = "mingw"; then
  SEPCHAR=';'
else
  SEPCHAR=':'
fi
AC_DEFINE_UNQUOTED(SEPCHAR, ['$SEPCHAR'], [Character that separates PATH elements.])
dnl This is for MinGW, and is used in test/automated/Makefile.in.
dnl The MSYS Bash has heuristics for replacing ':' with ';' when it
dnl decides that a command-line argument to be passed to a MinGW program
dnl is a PATH-style list of directories.  But that heuristics plays it
dnl safe, and only does the replacement when it is _absolutely_ sure it
dnl sees a colon-separated list of file names; e.g. ":." is left alone,
dnl which breaks in-tree builds.  So we do this manually instead.
dnl Note that we cannot rely on PATH_SEPARATOR, as that one will always
dnl be computed as ':' in MSYS Bash.
AC_SUBST(SEPCHAR)

dnl Everybody supports this, except MS-DOS.
AC_DEFINE(subprocesses, 1, [Define to enable asynchronous subprocesses.])

AC_DEFINE(USER_FULL_NAME, [pw->pw_gecos], [How to get a user's full name.])


AC_DEFINE(DIRECTORY_SEP, ['/'],
  [Character that separates directories in a file name.])

if test "${opsys}" = "mingw"; then
  AC_DEFINE(IS_DEVICE_SEP(_c_), [((_c_) == ':')],
    [Returns true if character is a device separator.])

  AC_DEFINE(IS_DIRECTORY_SEP(_c_), [((_c_) == '/' || (_c_) == '\\')],
    [Returns true if character is a directory separator.])

  AC_DEFINE(IS_ANY_SEP(_c_), [(IS_DIRECTORY_SEP (_c_) || IS_DEVICE_SEP(_c_))],
    [Returns true if character is any form of separator.])
else
  AC_DEFINE(IS_DEVICE_SEP(_c_), 0,
    [Returns true if character is a device separator.])

  AC_DEFINE(IS_DIRECTORY_SEP(_c_), [((_c_) == DIRECTORY_SEP)],
    [Returns true if character is a directory separator.])

  AC_DEFINE(IS_ANY_SEP(_c_), [(IS_DIRECTORY_SEP (_c_))],
    [Returns true if character is any form of separator.])
fi

AH_TEMPLATE(NO_EDITRES, [Define if XEditRes should not be used.])

case $opsys in
  aix4-2)
    dnl Unfortunately without libXmu we cannot support EditRes.
    if test "x$ac_cv_search_XmuConvertStandardSelection" = xno; then
      AC_DEFINE(NO_EDITRES, 1)
    fi
    ;;

  hpux*)
    dnl Assar Westerlund <assar@sics.se> says this is necessary for
    dnl HP-UX 10.20, and that it works for HP-UX 0 as well.
    AC_DEFINE(NO_EDITRES, 1)
    ;;
esac


case $opsys in
  irix6-5 | sol2* | unixware )
    dnl Some SVr4s don't define NSIG in sys/signal.h for ANSI environments;
    dnl instead, there's a system variable _sys_nsig.  Unfortunately, we
    dnl need the constant to dimension an array.  So wire in the appropriate
    dnl value here.
    AC_DEFINE(NSIG_MINIMUM, 32, [Minimum value of NSIG.])
    ;;
esac

emacs_broken_SIGIO=no

case $opsys in
  dnl SIGIO exists, but the feature doesn't work in the way Emacs needs.
  dnl See eg <http://article.gmane.org/gmane.os.openbsd.ports/46831>.
  hpux* | irix6-5 | openbsd | sol2* | unixware )
    emacs_broken_SIGIO=yes
    ;;

  aix4-2)
    dnl On AIX Emacs uses the gmalloc.c malloc implementation.  But given
    dnl the way this system works, libc functions that return malloced
    dnl memory use the libc malloc implementation. Calling xfree or
    dnl xrealloc on the results of such functions results in a crash.
    dnl
    dnl One solution for this could be to define SYSTEM_MALLOC in configure,
    dnl but that does not currently work on this system.
    dnl
    dnl It is possible to completely override the malloc implementation on
    dnl AIX, but that involves putting the malloc functions in a shared
    dnl library and setting the MALLOCTYPE environment variable to point to
    dnl that shared library.
    dnl
    dnl Emacs currently calls xrealloc on the results of get_current_dir name,
    dnl to avoid a crash just use the Emacs implementation for that function.
    dnl
    dnl FIXME We could change the AC_CHECK_FUNCS call near the start
    dnl of this file, so that we do not check for get_current_dir_name
    dnl on AIX.  But that might be fragile if something else ends
    dnl up testing for get_current_dir_name as a dependency.
    AC_DEFINE(BROKEN_GET_CURRENT_DIR_NAME, 1, [Define if
      get_current_dir_name should not be used.])
    ;;

  freebsd)
    dnl Circumvent a bug in FreeBSD.  In the following sequence of
    dnl writes/reads on a PTY, read(2) returns bogus data:
    dnl
    dnl write(2)  1022 bytes
    dnl write(2)   954 bytes, get EAGAIN
    dnl read(2)   1024 bytes in process_read_output
    dnl read(2)     11 bytes in process_read_output
    dnl
    dnl That is, read(2) returns more bytes than have ever been written
    dnl successfully.  The 1033 bytes read are the 1022 bytes written
    dnl successfully after processing (for example with CRs added if the
    dnl terminal is set up that way which it is here).  The same bytes will
    dnl be seen again in a later read(2), without the CRs.
    AC_DEFINE(BROKEN_PTY_READ_AFTER_EAGAIN, 1, [Define on FreeBSD to
      work around an issue when reading from a PTY.])
    ;;
esac

case $opsys in
  gnu-* | sol2-10 )
    dnl FIXME Can't we test if this exists (eg /proc/$$)?
    AC_DEFINE(HAVE_PROCFS, 1, [Define if you have the /proc filesystem.])
  ;;
esac

case $opsys in
  darwin | dragonfly | freebsd | netbsd | openbsd )
    AC_DEFINE(DONT_REOPEN_PTY, 1, [Define if process.c does not need to
      close a pty to make it a controlling terminal (it is already a
      controlling terminal of the subprocess, because we did ioctl TIOCSCTTY).])
  ;;
esac

dnl FIXME Surely we can test for this rather than hard-code it.
case $opsys in
  netbsd | openbsd) sound_device="/dev/audio" ;;
  *) sound_device="/dev/dsp" ;;
esac

dnl Used in sound.c
AC_DEFINE_UNQUOTED(DEFAULT_SOUND_DEVICE, "$sound_device",
  [Name of the default sound device.])


dnl Emacs can read input using SIGIO and buffering characters itself,
dnl or using CBREAK mode and making C-g cause SIGINT.
dnl The choice is controlled by the variable interrupt_input.
dnl
dnl Define INTERRUPT_INPUT to make interrupt_input = 1 the default (use SIGIO)
dnl
dnl Emacs uses the presence of the USABLE_SIGIO macro
dnl to indicate whether or not signal-driven I/O is possible.  It uses
dnl INTERRUPT_INPUT to decide whether to use it by default.
dnl
dnl SIGIO can be used only on systems that implement it (4.2 and 4.3).
dnl CBREAK mode has two disadvantages
dnl 1) At least in 4.2, it is impossible to handle the Meta key properly.
dnl I hear that in system V this problem does not exist.
dnl 2) Control-G causes output to be discarded.
dnl I do not know whether this can be fixed in system V.
dnl
dnl Another method of doing input is planned but not implemented.
dnl It would have Emacs fork off a separate process
dnl to read the input and send it to the true Emacs process
dnl through a pipe.
case $opsys in
  darwin | gnu-linux | gnu-kfreebsd )
    AC_DEFINE(INTERRUPT_INPUT, 1, [Define to read input using SIGIO.])
  ;;
esac


dnl If the system's imake configuration file defines `NeedWidePrototypes'
dnl as `NO', we must define NARROWPROTO manually.  Such a define is
dnl generated in the Makefile generated by `xmkmf'.  If we don't define
dnl NARROWPROTO, we will see the wrong function prototypes for X functions
dnl taking float or double parameters.
case $opsys in
  cygwin|gnu|gnu-linux|gnu-kfreebsd|irix6-5|freebsd|netbsd|openbsd)
    AC_DEFINE(NARROWPROTO, 1, [Define if system's imake configuration
      file defines `NeedWidePrototypes' as `NO'.])
  ;;
esac


dnl Used in process.c, this must be a loop, even if it only runs once.
dnl (Except on SGI; see below.  Take that, clarity and consistency!)
AH_TEMPLATE(PTY_ITERATION, [How to iterate over PTYs.])
dnl Only used if !PTY_ITERATION.  Iterate from FIRST_PTY_LETTER to z,
dnl trying suffixes 0-16.
AH_TEMPLATE(FIRST_PTY_LETTER, [Letter to use in finding device name of
  first PTY, if PTYs are supported.])
AH_TEMPLATE(PTY_OPEN, [How to open a PTY, if non-standard.])
AH_TEMPLATE(PTY_NAME_SPRINTF, [How to get the device name of the control
  end of a PTY, if non-standard.])
AH_TEMPLATE(PTY_TTY_NAME_SPRINTF, [How to get device name of the tty
  end of a PTY, if non-standard.])

case $opsys in
  aix4-2 )
    AC_DEFINE(PTY_ITERATION, [int c; for (c = 0; !c ; c++)])
    dnl You allocate a pty by opening /dev/ptc to get the master side.
    dnl To get the name of the slave side, you just ttyname() the master side.
    AC_DEFINE(PTY_NAME_SPRINTF, [strcpy (pty_name, "/dev/ptc");])
    AC_DEFINE(PTY_TTY_NAME_SPRINTF, [strcpy (pty_name, ttyname (fd));])
    ;;

  cygwin )
    AC_DEFINE(PTY_ITERATION, [int i; for (i = 0; i < 1; i++)])
    dnl multi-line AC_DEFINEs are hard. :(
    AC_DEFINE(PTY_OPEN, [ do { int dummy; sigset_t blocked, procmask; sigemptyset (&blocked); sigaddset (&blocked, SIGCHLD); pthread_sigmask (SIG_BLOCK, &blocked, &procmask); if (-1 == openpty (&fd, &dummy, pty_name, 0, 0)) fd = -1; pthread_sigmask (SIG_SETMASK, &procmask, 0); if (fd >= 0) emacs_close (dummy); } while (false)])
    AC_DEFINE(PTY_NAME_SPRINTF, [])
    AC_DEFINE(PTY_TTY_NAME_SPRINTF, [])
    ;;

  dnl FIXME?  Maybe use same as freebsd - see bug#12040.
  darwin )
    AC_DEFINE(PTY_ITERATION, [int i; for (i = 0; i < 1; i++)])
    dnl Not used, because PTY_ITERATION is defined.
    AC_DEFINE(FIRST_PTY_LETTER, ['p'])
    dnl Note that openpty may fork via grantpt on Mac OS X 10.4/Darwin 8.
    dnl But we don't have to block SIGCHLD because it is blocked in the
    dnl implementation of grantpt.
    AC_DEFINE(PTY_OPEN, [ do { int slave; if (openpty (&fd, &slave, pty_name, NULL, NULL) == -1) fd = -1; else emacs_close (slave); } while (false)])
    AC_DEFINE(PTY_NAME_SPRINTF, [])
    AC_DEFINE(PTY_TTY_NAME_SPRINTF, [])
    ;;

  gnu | openbsd )
    AC_DEFINE(FIRST_PTY_LETTER, ['p'])
    ;;

  gnu-linux | gnu-kfreebsd | dragonfly | freebsd | netbsd )
    dnl if HAVE_GRANTPT
    if test "x$ac_cv_func_grantpt" = xyes; then
      AC_DEFINE(UNIX98_PTYS, 1, [Define if the system has Unix98 PTYs.])
      AC_DEFINE(PTY_ITERATION, [int i; for (i = 0; i < 1; i++)])
      dnl Note that grantpt and unlockpt may fork.  We must block SIGCHLD
      dnl to prevent sigchld_handler from intercepting the child's death.
      AC_DEFINE(PTY_TTY_NAME_SPRINTF, [{ char *ptyname = 0; sigset_t blocked; sigemptyset (&blocked); sigaddset (&blocked, SIGCHLD); pthread_sigmask (SIG_BLOCK, &blocked, 0); if (grantpt (fd) != -1 && unlockpt (fd) != -1) ptyname = ptsname(fd); pthread_sigmask (SIG_UNBLOCK, &blocked, 0); if (!ptyname) { emacs_close (fd); return -1; } snprintf (pty_name, PTY_NAME_SIZE, "%s", ptyname); }])
      dnl if HAVE_POSIX_OPENPT
      if test "x$ac_cv_func_posix_openpt" = xyes; then
        AC_DEFINE(PTY_OPEN, [do { fd = posix_openpt (O_RDWR | O_CLOEXEC | O_NOCTTY); if (fd < 0 && errno == EINVAL) fd = posix_openpt (O_RDWR | O_NOCTTY); } while (false)])
        AC_DEFINE(PTY_NAME_SPRINTF, [])
      dnl if HAVE_GETPT
      elif test "x$ac_cv_func_getpt" = xyes; then
        AC_DEFINE(PTY_OPEN, [fd = getpt ()])
        AC_DEFINE(PTY_NAME_SPRINTF, [])
      else
        AC_DEFINE(PTY_NAME_SPRINTF, [strcpy (pty_name, "/dev/ptmx");])
      fi
    else
      AC_DEFINE(FIRST_PTY_LETTER, ['p'])
    fi
    ;;

  hpux*)
    AC_DEFINE(FIRST_PTY_LETTER, ['p'])
    AC_DEFINE(PTY_NAME_SPRINTF, [sprintf (pty_name, "/dev/ptym/pty%c%x", c, i);])
    AC_DEFINE(PTY_TTY_NAME_SPRINTF, [sprintf (pty_name, "/dev/pty/tty%c%x", c, i);])
    ;;

  irix6-5 )
    dnl It looks like this cannot be right, because it is not a loop.
    dnl However, process.c actually does this:
    dnl # ifndef __sgi
    dnl   continue;
    dnl # else
    dnl   return -1;
    dnl # endif
    dnl which presumably makes it OK, since irix == sgi (?).
    dnl FIXME it seems like this special treatment is unnecessary?
    dnl Why can't irix use a single-trip loop like eg cygwin?
    AC_DEFINE(PTY_ITERATION, [])
    dnl Not used, because PTY_ITERATION is defined.
    AC_DEFINE(FIRST_PTY_LETTER, ['q'])
    AC_DEFINE(PTY_OPEN, [ { struct sigaction ocstat, cstat; struct stat stb; char * name; sigemptyset(&cstat.sa_mask); cstat.sa_handler = SIG_DFL; cstat.sa_flags = 0; sigaction(SIGCHLD, &cstat, &ocstat); name = _getpty (&fd, O_RDWR | O_NDELAY, 0600, 0); sigaction(SIGCHLD, &ocstat, (struct sigaction *)0); if (name == 0) return -1; if (fd < 0) return -1; if (fstat (fd, &stb) < 0) return -1; strcpy (pty_name, name); }])
    dnl No need to get the pty name at all.
    AC_DEFINE(PTY_NAME_SPRINTF, [])
    dnl No need to use sprintf to get the tty name--we get that from _getpty.
    AC_DEFINE(PTY_TTY_NAME_SPRINTF, [])
    ;;

  sol2* )
    dnl On SysVr4, grantpt(3) forks a subprocess, so keep sigchld_handler()
    dnl from intercepting that death.  If any child but grantpt's should die
    dnl within, it should be caught after sigrelse(2).
    AC_DEFINE(PTY_TTY_NAME_SPRINTF, [{ char *ptsname (int), *ptyname; int grantpt_result; sigset_t blocked; sigemptyset (&blocked); sigaddset (&blocked, SIGCHLD); pthread_sigmask (SIG_BLOCK, &blocked, 0); grantpt_result = grantpt (fd); pthread_sigmask (SIG_UNBLOCK, &blocked, 0); if (grantpt_result == -1 || unlockpt (fd) == -1 || !(ptyname = ptsname (fd))) { emacs_close (fd); return -1; } snprintf (pty_name, PTY_NAME_SIZE, "%s", ptyname); }])
    ;;

  unixware )
    dnl Comments are as per sol2*.
    AC_DEFINE(PTY_TTY_NAME_SPRINTF, [{ char *ptsname (int), *ptyname; int grantpt_result; sigset_t blocked; sigemptyset (&blocked); sigaddset (&blocked, SIGCHLD); pthread_sigmask (SIG_BLOCK, &blocked, 0); grantpt_result = grantpt (fd); pthread_sigmask (SIG_UNBLOCK, &blocked, 0); if (grantpt_result == -1) fatal("could not grant slave pty"); if (unlockpt(fd) == -1) fatal("could not unlock slave pty"); if (!(ptyname = ptsname(fd))) fatal ("could not enable slave pty"); snprintf (pty_name, PTY_NAME_SIZE, "%s", ptyname); }])
    ;;
esac


case $opsys in
  sol2* | unixware )
    dnl This change means that we don't loop through allocate_pty too
    dnl many times in the (rare) event of a failure.
    AC_DEFINE(FIRST_PTY_LETTER, ['z'])
    AC_DEFINE(PTY_NAME_SPRINTF, [strcpy (pty_name, "/dev/ptmx");])
    dnl Push various streams modules onto a PTY channel.  Used in process.c.
    AC_DEFINE(SETUP_SLAVE_PTY, [if (ioctl (xforkin, I_PUSH, "ptem") == -1) fatal ("ioctl I_PUSH ptem"); if (ioctl (xforkin, I_PUSH, "ldterm") == -1) fatal ("ioctl I_PUSH ldterm"); if (ioctl (xforkin, I_PUSH, "ttcompat") == -1) fatal ("ioctl I_PUSH ttcompat");], [How to set up a slave PTY, if needed.])
    ;;
esac


AH_TEMPLATE(SIGNALS_VIA_CHARACTERS, [Make process_send_signal work by
"typing" a signal character on the pty.])

case $opsys in
  dnl Perry Smith <pedz@ddivt1.austin.ibm.com> says this is correct for AIX.
  dnl thomas@mathematik.uni-bremen.de says this is needed for IRIX.
  aix4-2 | cygwin | gnu | irix6-5 | dragonfly | freebsd | netbsd | openbsd | darwin )
    AC_DEFINE(SIGNALS_VIA_CHARACTERS, 1)
    ;;

  dnl 21 Jun 06: Eric Hanchrow <offby1@blarg.net> says this works.
  dnl FIXME Does gnu-kfreebsd have linux/version.h?  It seems unlikely...
  gnu-linux | gnu-kfreebsd )

    AC_MSG_CHECKING([for signals via characters])
    AC_PREPROC_IFELSE([AC_LANG_PROGRAM([[
#include <linux/version.h>
#if LINUX_VERSION_CODE < 0x20400
# error "Linux version too old"
#endif
      ]], [[]])], emacs_signals_via_chars=yes, emacs_signals_via_chars=no)

    AC_MSG_RESULT([$emacs_signals_via_chars])
    test $emacs_signals_via_chars = yes && AC_DEFINE(SIGNALS_VIA_CHARACTERS, 1)
    ;;
esac


AH_TEMPLATE(TAB3, [Undocumented.])

case $opsys in
  darwin) AC_DEFINE(TAB3, OXTABS) ;;

  gnu | dragonfly | freebsd | netbsd | openbsd )
    AC_DEFINE(TABDLY, OXTABS, [Undocumented.])
    AC_DEFINE(TAB3, OXTABS)
    ;;

  gnu-linux | gnu-kfreebsd )
    AC_PREPROC_IFELSE([AC_LANG_PROGRAM([[
#ifndef __ia64__
# error "not ia64"
#endif
      ]], [[]])], AC_DEFINE(GC_MARK_SECONDARY_STACK(),
        [do { extern void *__libc_ia64_register_backing_store_base; __builtin_ia64_flushrs (); mark_memory (__libc_ia64_register_backing_store_base, __builtin_ia64_bsp ());} while (false)],
        [Mark a secondary stack, like the register stack on the ia64.]), [])
    ;;

  hpux*)
    AC_DEFINE(RUN_TIME_REMAP, 1, [Define if emacs.c needs to call
      run_time_remap; for HPUX.])
    ;;
esac


dnl This won't be used automatically yet.  We also need to know, at least,
dnl that the stack is continuous.
AH_TEMPLATE(GC_SETJMP_WORKS, [Define if setjmp is known to save all
  registers relevant for conservative garbage collection in the jmp_buf.])


case $opsys in
  dnl Not all the architectures are tested, but there are Debian packages
  dnl for SCM and/or Guile on them, so the technique must work.  See also
  dnl comments in alloc.c concerning setjmp and gcc.
  dnl Fixme: it's probably safe to just use the GCC conditional below.
  gnu-linux | gnu-kfreebsd )
    AC_PREPROC_IFELSE([AC_LANG_PROGRAM([[
#if defined __i386__ || defined __sparc__ || defined __mc68000__ \
  || defined __alpha__ || defined __mips__ || defined __s390__ \
  || defined __arm__ || defined __powerpc__ || defined __amd64__ \
  || defined __ia64__ || defined __sh__
/* ok */
#else
# error "setjmp not known to work on this arch"
#endif
    ]], [[]])], AC_DEFINE(GC_SETJMP_WORKS, 1))
    ;;
esac


if test x$GCC = xyes; then
   dnl GC_SETJMP_WORKS is nearly always appropriate for GCC.
   AC_DEFINE(GC_SETJMP_WORKS, 1)
else
  case $opsys in
    dnl irix: Tested on Irix 6.5.  SCM worked on earlier versions.
    aix* | dragonfly | freebsd | netbsd | openbsd | irix6-5 | sol2* )
      AC_DEFINE(GC_SETJMP_WORKS, 1)
      ;;
  esac
fi                              dnl GCC?

dnl In a weird quirk, MS runtime uses _setjmp and longjmp.
AC_CACHE_CHECK([for _setjmp], [emacs_cv_func__setjmp],
  [AC_LINK_IFELSE(
     [AC_LANG_PROGRAM(
       [[#include <setjmp.h>
         #ifdef __MINGW32__
         # define _longjmp longjmp
         #endif
       ]],
       [[jmp_buf j;
	 if (! _setjmp (j))
	   _longjmp (j, 1);]])],
     [emacs_cv_func__setjmp=yes],
     [emacs_cv_func__setjmp=no])])
if test $emacs_cv_func__setjmp = yes; then
  AC_DEFINE([HAVE__SETJMP], 1, [Define to 1 if _setjmp and _longjmp work.])
else
  AC_CACHE_CHECK([for sigsetjmp], [emacs_cv_func_sigsetjmp],
    [AC_LINK_IFELSE(
       [AC_LANG_PROGRAM(
	 [[#include <setjmp.h>
	 ]],
	 [[sigjmp_buf j;
	   if (! sigsetjmp (j, 1))
	     siglongjmp (j, 1);]])],
       [emacs_cv_func_sigsetjmp=yes],
       [emacs_cv_func_sigsetjmp=no])])
  if test $emacs_cv_func_sigsetjmp = yes; then
    AC_DEFINE([HAVE_SIGSETJMP], 1,
      [Define to 1 if sigsetjmp and siglongjmp work.
       The value of this symbol is irrelevant if HAVE__SETJMP is defined.])
  fi
fi

case $opsys in
  sol2* | unixware )
    dnl TIOCGPGRP is broken in SysVr4, so we can't send signals to PTY
    dnl subprocesses the usual way.  But TIOCSIGNAL does work for PTYs,
    dnl and this is all we need.
    AC_DEFINE(TIOCSIGSEND, TIOCSIGNAL, [Some platforms redefine this.])
    ;;
esac


case $opsys in
  hpux* | sol2* )
    dnl Used in xfaces.c.
    AC_DEFINE(XOS_NEEDS_TIME_H, 1, [Compensate for a bug in Xos.h on
      some systems, where it requires time.h.])
    ;;
esac


dnl Define symbols to identify the version of Unix this is.
dnl Define all the symbols that apply correctly.
AH_TEMPLATE(DOS_NT, [Define if the system is MS DOS or MS Windows.])
AH_TEMPLATE(MSDOS, [Define if the system is MS DOS.])
AH_TEMPLATE(USG, [Define if the system is compatible with System III.])
AH_TEMPLATE(USG5_4, [Define if the system is compatible with System V Release 4.])

case $opsys in
  aix4-2)
    AC_DEFINE(USG, [])
    dnl This symbol should be defined on AIX Version 3  ???????
    AC_PREPROC_IFELSE([AC_LANG_PROGRAM([[
#ifndef _AIX
# error "_AIX not defined"
#endif
    ]], [[]])], [], AC_DEFINE(_AIX, [], [Define if the system is AIX.]))
    ;;

  cygwin)
    AC_DEFINE(CYGWIN, 1, [Define if the system is Cygwin.])
    ;;

  darwin)
    dnl Not __APPLE__, as this may not be defined on non-OSX Darwin.
    dnl Not DARWIN, because Panther and lower CoreFoundation.h use DARWIN to
    dnl distinguish OS X from pure Darwin.
    AC_DEFINE(DARWIN_OS, [], [Define if the system is Darwin.])
    ;;

  gnu-linux | gnu-kfreebsd )
    AC_DEFINE(USG, [])
    AC_DEFINE(GNU_LINUX, [], [Define if ths system is compatible with GNU/Linux.])
    ;;

  hpux*)
    AC_DEFINE(USG, [])
    AC_DEFINE(HPUX, [], [Define if the system is HPUX.])
    ;;

  irix6-5)
    AC_DEFINE(USG, [])
    AC_DEFINE(USG5_4, [])
    AC_DEFINE(IRIX6_5, [], [Define if the system is IRIX.])
    ;;

  mingw)
    AC_DEFINE(DOS_NT, [])
    AC_DEFINE(WINDOWSNT, 1, [Define if compiling for native MS Windows.])
    if test "x$ac_enable_checking" != "x" ; then
      AC_DEFINE(EMACSDEBUG, 1, [Define to 1 to enable w32 debug facilities.])
    fi
    ;;

  sol2*)
    AC_DEFINE(USG, [])
    AC_DEFINE(USG5_4, [])
    AC_DEFINE(SOLARIS2, [], [Define if the system is Solaris.])
    ;;

  unixware)
    AC_DEFINE(USG, [])
    AC_DEFINE(USG5_4, [])
    ;;
esac

AC_CACHE_CHECK([for usable FIONREAD], [emacs_cv_usable_FIONREAD],
  [case $opsys in
     aix4-2)
       dnl BUILD 9008 - FIONREAD problem still exists in X-Windows.
       emacs_cv_usable_FIONREAD=no
       ;;

     mingw)
       emacs_cv_usable_FIONREAD=yes
       ;;

     *)
       AC_COMPILE_IFELSE(
	 [AC_LANG_PROGRAM([[#include <sys/types.h>
			    #include <sys/ioctl.h>
			    #ifdef USG5_4
			    # include <sys/filio.h>
			    #endif
			  ]],
			  [[int foo = ioctl (0, FIONREAD, &foo);]])],
	 [emacs_cv_usable_FIONREAD=yes],
	 [emacs_cv_usable_FIONREAD=no])
       ;;
   esac])
if test $emacs_cv_usable_FIONREAD = yes; then
  AC_DEFINE([USABLE_FIONREAD], [1], [Define to 1 if FIONREAD is usable.])

  if test $emacs_broken_SIGIO = no; then
    AC_CACHE_CHECK([for usable SIGIO], [emacs_cv_usable_SIGIO],
      [AC_COMPILE_IFELSE(
	 [AC_LANG_PROGRAM([[#include <fcntl.h>
			    #include <signal.h>
			  ]],
			  [[int foo = SIGIO | F_SETFL | FASYNC;]])],
	 [emacs_cv_usable_SIGIO=yes],
	 [emacs_cv_usable_SIGIO=no])],
      [emacs_cv_usable_SIGIO=yes],
      [emacs_cv_usable_SIGIO=no])
    if test $emacs_cv_usable_SIGIO = yes; then
      AC_DEFINE([USABLE_SIGIO], [1], [Define to 1 if SIGIO is usable.])
    fi
  fi
fi


case $opsys in
  dnl Emacs supplies its own malloc, but glib calls posix_memalign,
  dnl and on Cygwin prior to version 1.7.24 that becomes the
  dnl Cygwin-supplied posix_memalign.  As malloc is not the Cygwin
  dnl malloc, the Cygwin posix_memalign always returns ENOSYS.  A
  dnl workaround is to set G_SLICE=always-malloc.  This is no longer
  dnl needed starting with cygwin-1.7.24, and it is no longer
  dnl effective starting with glib-2.36. */
  cygwin)
    AC_DEFINE(G_SLICE_ALWAYS_MALLOC, 1, [Define to set the
      G_SLICE environment variable to "always-malloc" at startup.])
    ;;

  hpux11)
    dnl It works to open the pty's tty in the parent (Emacs), then
    dnl close and reopen it in the child.
    AC_DEFINE(USG_SUBTTY_WORKS, 1, [Define for USG systems where it
      works to open a pty's tty in the parent process, then close and
      reopen it in the child.])
    ;;

  irix6-5)
    AC_DEFINE(PREFER_VSUSP, 1, [Define if process_send_signal should
      use VSUSP instead of VSWTCH.])
    ;;

  sol2-10)
    AC_DEFINE(_STRUCTURED_PROC, 1, [Needed for system_process_attributes
      on Solaris.])
    ;;
esac

# Set up the CFLAGS for real compilation, so we can substitute it.
CFLAGS="$REAL_CFLAGS"
CPPFLAGS="$REAL_CPPFLAGS"
LIBS="$REAL_LIBS"

## Hack to detect a buggy GCC version.
if test "x$GCC" = xyes \
   && test x"`$CC --version 2> /dev/null | grep 'gcc.* 4.5.0'`" != x \
   && test x"`echo $CFLAGS | grep '\-O@<:@23@:>@'`" != x \
   && test x"`echo $CFLAGS | grep '\-fno-optimize-sibling-calls'`" = x; then
   AC_MSG_ERROR([GCC 4.5.0 has problems compiling Emacs; see etc/PROBLEMS'.])
fi

version=$PACKAGE_VERSION

copyright="Copyright (C) 2014 Free Software Foundation, Inc."
AC_DEFINE_UNQUOTED(COPYRIGHT, ["$copyright"],
  [Short copyright string for this version of Emacs.])
AC_SUBST(copyright)

### Specify what sort of things we'll be editing into Makefile and config.h.
### Use configuration here uncanonicalized to avoid exceeding size limits.
AC_SUBST(version)
AC_SUBST(configuration)
## Unused?
AC_SUBST(canonical)
AC_SUBST(srcdir)
AC_SUBST(prefix)
AC_SUBST(exec_prefix)
AC_SUBST(bindir)
AC_SUBST(datadir)
AC_SUBST(sharedstatedir)
AC_SUBST(libexecdir)
AC_SUBST(mandir)
AC_SUBST(infodir)
AC_SUBST(lispdir)
AC_SUBST(standardlisppath)
AC_SUBST(locallisppath)
AC_SUBST(lisppath)
AC_SUBST(x_default_search_path)
AC_SUBST(etcdir)
AC_SUBST(archlibdir)
AC_SUBST(etcdocdir)
AC_SUBST(bitmapdir)
AC_SUBST(gamedir)
AC_SUBST(gameuser)
## FIXME? Nothing uses @LD_SWITCH_X_SITE@.
## src/Makefile.in did add LD_SWITCH_X_SITE (as a cpp define) to the
## end of LIBX_BASE, but nothing ever set it.
AC_SUBST(LD_SWITCH_X_SITE)
AC_SUBST(C_SWITCH_X_SITE)
AC_SUBST(GNUSTEP_CFLAGS)
AC_SUBST(CFLAGS)
## Used in lwlib/Makefile.in.
AC_SUBST(X_TOOLKIT_TYPE)
AC_SUBST(ns_appdir)
AC_SUBST(ns_appbindir)
AC_SUBST(ns_appresdir)
AC_SUBST(ns_appsrc)
AC_SUBST(GNU_OBJC_CFLAGS)
AC_SUBST(OTHER_FILES)

if test -n "${term_header}"; then
    AC_DEFINE_UNQUOTED(TERM_HEADER, "${term_header}",
        [Define to the header for the built-in window system.])
fi

AC_DEFINE_UNQUOTED(EMACS_CONFIGURATION,  "${canonical}",
		   [Define to the canonical Emacs configuration name.])
AC_DEFINE_UNQUOTED(EMACS_CONFIG_OPTIONS, "${emacs_config_options}",
		   [Define to the options passed to configure.])
AH_TEMPLATE(config_opsysfile, [Some platforms that do not use configure
  define this to include extra configuration information.])

case $opsys in
  mingw)
    AC_DEFINE(config_opsysfile, <ms-w32.h>, [])
    ;;
esac

XMENU_OBJ=
XOBJ=
FONT_OBJ=
if test "${HAVE_X_WINDOWS}" = "yes" ; then
  AC_DEFINE(HAVE_X_WINDOWS, 1,
	    [Define to 1 if you want to use the X window system.])
  XMENU_OBJ=xmenu.o
  XOBJ="xterm.o xfns.o xselect.o xrdb.o xsmfns.o xsettings.o"
  FONT_OBJ=xfont.o
  if test "$HAVE_XFT" = "yes"; then
    FONT_OBJ="$FONT_OBJ ftfont.o xftfont.o ftxfont.o"
  elif test "$HAVE_FREETYPE" = "yes"; then
    FONT_OBJ="$FONT_OBJ ftfont.o ftxfont.o"
  fi
  AC_SUBST(FONT_OBJ)
fi
AC_SUBST(XMENU_OBJ)
AC_SUBST(XOBJ)
AC_SUBST(FONT_OBJ)

WIDGET_OBJ=
MOTIF_LIBW=
if test "${USE_X_TOOLKIT}" != "none" ; then
  WIDGET_OBJ=widget.o
  AC_DEFINE(USE_X_TOOLKIT, 1, [Define to 1 if using an X toolkit.])
  if test "${USE_X_TOOLKIT}" = "LUCID"; then
    AC_DEFINE(USE_LUCID, 1, [Define to 1 if using the Lucid X toolkit.])
  elif test "${USE_X_TOOLKIT}" = "MOTIF"; then
    AC_DEFINE(USE_MOTIF, 1, [Define to 1 if using the Motif X toolkit.])
    MOTIF_LIBW=-lXm
    case "$opsys" in
      gnu-linux)
        ## Paul Abrahams <abrahams at equinox.shaysnet.com> says this is needed.
        MOTIF_LIBW="$MOTIF_LIBW -lXpm"
        ;;

      unixware)
        ## Richard Anthony Ryan <ryanr at ellingtn.ftc.nrcs.usda.gov>
        ## says -lXimp is needed in UNIX_SV ... 4.2 1.1.2.
        MOTIF_LIBW="MOTIF_LIBW -lXimp"
        ;;

      aix4-2)
        ## olson@mcs.anl.gov says -li18n is needed by -lXm.
        MOTIF_LIBW="$MOTIF_LIBW -li18n"
        ;;
    esac
    MOTIF_LIBW="$MOTIF_LIBW $LIBXP"
  fi
fi
AC_SUBST(WIDGET_OBJ)

TOOLKIT_LIBW=
case "$USE_X_TOOLKIT" in
  MOTIF) TOOLKIT_LIBW="$MOTIF_LIBW" ;;
  LUCID) TOOLKIT_LIBW="$LUCID_LIBW" ;;
  none) test "x$HAVE_GTK" = "xyes" && TOOLKIT_LIBW="$GTK_LIBS" ;;
esac
AC_SUBST(TOOLKIT_LIBW)

if test "${opsys}" != "mingw"; then
  if test "$USE_X_TOOLKIT" = "none"; then
    LIBXT_OTHER="\$(LIBXSM)"
  else
    LIBXT_OTHER="\$(LIBXMU) -lXt \$(LIBXTR6) -lXext"
  fi
fi
AC_SUBST(LIBXT_OTHER)

if test "${HAVE_X11}" = "yes" ; then
  AC_DEFINE(HAVE_X11, 1,
	    [Define to 1 if you want to use version 11 of X windows.])
  LIBX_OTHER="\$(LIBXT) \$(LIBX_EXTRA)"
else
  LIBX_OTHER=
fi
AC_SUBST(LIBX_OTHER)

if test "$HAVE_GTK" = yes || test "$HAVE_X11" != yes; then
  LIBXMENU=
elif test "$USE_X_TOOLKIT" = none; then
  LIBXMENU='$(oldXMenudir)/libXMenu11.a'
else
  LIBXMENU='$(lwlibdir)/liblw.a'
fi
AC_SUBST(LIBXMENU)

if test "${GNU_MALLOC}" = "yes" ; then
  AC_DEFINE(GNU_MALLOC, 1,
	    [Define to 1 if you want to use the GNU memory allocator.])
fi

RALLOC_OBJ=
if test "${REL_ALLOC}" = "yes" ; then
  AC_DEFINE(REL_ALLOC, 1,
	    [Define REL_ALLOC if you want to use the relocating allocator for
	     buffer space.])

  test "$system_malloc" != "yes" && RALLOC_OBJ=ralloc.o
fi
AC_SUBST(RALLOC_OBJ)

if test "$opsys" = "cygwin"; then
  CYGWIN_OBJ="sheap.o cygw32.o"
  ## Cygwin differs because of its unexec().
  PRE_ALLOC_OBJ=
  POST_ALLOC_OBJ=lastfile.o
elif test "$opsys" = "mingw"; then
  CYGWIN_OBJ=
  PRE_ALLOC_OBJ=
  POST_ALLOC_OBJ=lastfile.o
else
  CYGWIN_OBJ=
  PRE_ALLOC_OBJ=lastfile.o
  POST_ALLOC_OBJ=
fi
AC_SUBST(CYGWIN_OBJ)
AC_SUBST(PRE_ALLOC_OBJ)
AC_SUBST(POST_ALLOC_OBJ)

dnl Call this 'FORTIFY_SOUR' so that it sorts before the 'FORTIFY_SOURCE'
dnl verbatim defined above.  The tricky name is apropos, as this hack
dnl makes Fortify go sour!
AH_VERBATIM([FORTIFY_SOUR],
[/* Without the following workaround, Emacs runs slowly on OS X 10.8.
   The workaround disables some useful run-time checking, so it
   should be conditional to the platforms with the performance bug.
   Perhaps Apple will fix this some day; also see m4/extern-inline.m4.  */
#if defined __APPLE__ && defined __GNUC__
# ifndef _DONT_USE_CTYPE_INLINE_
#  define _DONT_USE_CTYPE_INLINE_
# endif
# ifndef _FORTIFY_SOURCE
#  define _FORTIFY_SOURCE 0
# endif
#endif
])

# If user asks to omit features, disable optional features that gnulib
# might otherwise enable.
if test "$with_features" = no && test "$enable_acl" != yes; then
  enable_acl=no
fi

# Configure gnulib.  Although this does not affect CFLAGS or LIBS permanently.
# it temporarily reverts them to their pre-pkg-config values,
# because gnulib needs to work with both src (which uses the
# pkg-config stuff) and lib-src (which does not).  For example, gnulib
# may need to determine whether LIB_CLOCK_GETTIME should contain -lrt,
# and it therefore needs to run in an environment where LIBS does not
# already contain -lrt merely because 'pkg-config --libs' printed '-lrt'
# for some package unrelated to lib-src.
SAVE_CFLAGS=$CFLAGS
SAVE_LIBS=$LIBS
CFLAGS=$pre_PKG_CONFIG_CFLAGS
LIBS="$LIB_PTHREAD $pre_PKG_CONFIG_LIBS"
gl_ASSERT_NO_GNULIB_POSIXCHECK
gl_ASSERT_NO_GNULIB_TESTS
gl_INIT
CFLAGS=$SAVE_CFLAGS
LIBS=$SAVE_LIBS

if test "${opsys}" = "mingw"; then
  CPPFLAGS="$CPPFLAGS -DUSE_CRT_DLL=1 -I \${abs_top_srcdir}/nt/inc"
  # Remove unneeded switches from the value of CC that goes to Makefiles
  CC=`echo $CC | sed -e "s,$GCC_TEST_OPTIONS,,"`
fi

case "$opsys" in
  aix4-2) LD_SWITCH_SYSTEM_TEMACS="-Wl,-bnodelcsect" ;;

  darwin)
   ## The -headerpad option tells ld (see man page) to leave room at the
   ## end of the header for adding load commands.  Needed for dumping.
   ## 0x690 is the total size of 30 segment load commands (at 56
   ## each); under Cocoa 31 commands are required.
   if test "$HAVE_NS" = "yes"; then
     libs_nsgui="-framework AppKit"
     if test "$NS_IMPL_COCOA" = "yes"; then
        libs_nsgui="$libs_nsgui -framework IOKit"
     fi
     headerpad_extra=6C8
   else
     libs_nsgui=
     headerpad_extra=690
   fi
   LD_SWITCH_SYSTEM_TEMACS="-fno-pie -prebind $libs_nsgui -Xlinker -headerpad -Xlinker $headerpad_extra"

   ## This is here because src/Makefile.in did some extra fiddling around
   ## with LD_SWITCH_SYSTEM.  It seems cleaner to put this in
   ## LD_SWITCH_SYSTEM_TEMACS instead,
   test "x$LD_SWITCH_SYSTEM" = "x" && test "x$GCC" != "xyes" && \
     LD_SWITCH_SYSTEM_TEMACS="-X $LD_SWITCH_SYSTEM_TEMACS"
   ;;

  ## LD_SWITCH_X_SITE_RPATH is a -rpath option saying where to
  ## find X at run-time.
  ## When handled by cpp, this was in LD_SWITCH_SYSTEM.  However, at the
  ## point where configure sourced the s/*.h file, LD_SWITCH_X_SITE_RPATH
  ## had not yet been defined and was expanded to null.  Hence LD_SWITCH_SYSTEM
  ## had different values in configure (in ac_link) and src/Makefile.in.
  ## It seems clearer therefore to put this piece in LD_SWITCH_SYSTEM_TEMACS.
  gnu*) LD_SWITCH_SYSTEM_TEMACS="\$(LD_SWITCH_X_SITE_RPATH)" ;;

  mingw)
   ## Is it any better under MinGW64 to relocate emacs into higher addresses?
   case "$canonical" in
     x86_64-*-*) LD_SWITCH_SYSTEM_TEMACS="-Wl,-stack,0x00800000 -Wl,-heap,0x00100000 -Wl,-image-base,0x400000000 -Wl,-entry,__start -Wl,-Map,./temacs.map" ;;
     *) LD_SWITCH_SYSTEM_TEMACS="-Wl,-stack,0x00800000 -Wl,-heap,0x00100000 -Wl,-image-base,0x01000000 -Wl,-entry,__start -Wl,-Map,./temacs.map" ;;
   esac
   ;;

  openbsd) LD_SWITCH_SYSTEM_TEMACS='-nopie' ;;

  *) LD_SWITCH_SYSTEM_TEMACS= ;;
esac

if test x$ac_enable_profiling != x ; then
  case $opsys in
    *freebsd | gnu-linux) ;;
    *) LD_SWITCH_SYSTEM_TEMACS="$LD_SWITCH_SYSTEM_TEMACS -pg" ;;
  esac
fi

LD_SWITCH_SYSTEM_TEMACS="$LDFLAGS_NOCOMBRELOC $LD_SWITCH_SYSTEM_TEMACS"

AC_SUBST(LD_SWITCH_SYSTEM_TEMACS)

## Common for all window systems
if test "$window_system" != "none"; then
  AC_DEFINE(HAVE_WINDOW_SYSTEM, 1, [Define if you have a window system.])
  AC_DEFINE(POLL_FOR_INPUT, 1, [Define if you poll periodically to detect C-g.])
  WINDOW_SYSTEM_OBJ="fontset.o fringe.o image.o"
fi

AC_SUBST(WINDOW_SYSTEM_OBJ)

AH_TOP([/* GNU Emacs site configuration template file.

Copyright (C) 1988, 1993-1994, 1999-2002, 2004-2014
  Free Software Foundation, Inc.

This file is part of GNU Emacs.

GNU Emacs is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.  */


/* No code in Emacs #includes config.h twice, but some bits of code
   intended to work with other packages as well (like gmalloc.c)
   think they can include it as many times as they like.  */
#ifndef EMACS_CONFIG_H
#define EMACS_CONFIG_H
])dnl

AH_BOTTOM([#include <conf_post.h>

#endif /* EMACS_CONFIG_H */

/*
Local Variables:
mode: c
End:
*/
])dnl

#### Report on what we decided to do.
#### Report GTK as a toolkit, even if it doesn't use Xt.
#### It makes printing result more understandable as using GTK sets
#### toolkit_scroll_bars to yes by default.
if test "${HAVE_GTK}" = "yes"; then
  USE_X_TOOLKIT="$USE_GTK_TOOLKIT"
fi

if test $USE_ACL -ne 0; then
  ACL_SUMMARY="yes $LIB_ACL"
else
  ACL_SUMMARY=no
fi

echo "
Configured for \`${canonical}'.

  Where should the build process find the source code?    ${srcdir}
  What compiler should emacs be built with?               ${CC} ${CFLAGS}
  Should Emacs use the GNU version of malloc?             ${GNU_MALLOC}${GNU_MALLOC_reason}
  Should Emacs use a relocating allocator for buffers?    ${REL_ALLOC}
  Should Emacs use mmap(2) for buffer allocation?         $use_mmap_for_buffers
  What window system should Emacs use?                    ${window_system}
  What toolkit should Emacs use?                          ${USE_X_TOOLKIT}"

if test -n "${x_includes}"; then
echo "  Where do we find X Windows header files?                ${x_includes}"
else
echo "  Where do we find X Windows header files?                Standard dirs"
fi
if test -n "${x_libraries}"; then
echo "  Where do we find X Windows libraries?                   ${x_libraries}"
else
echo "  Where do we find X Windows libraries?                   Standard dirs"
fi

optsep=
emacs_config_features=
for opt in XAW3D XPM JPEG TIFF GIF PNG RSVG IMAGEMAGICK SOUND GPM DBUS \
  GCONF GSETTINGS NOTIFY ACL LIBSELINUX GNUTLS LIBXML2 FREETYPE M17N_FLT \
  LIBOTF XFT ZLIB; do

    case $opt in
      NOTIFY|ACL) eval val=\${${opt}_SUMMARY} ;;
      *) eval val=\${HAVE_$opt} ;;
    esac
    test x"$val" = xno && continue
    AS_VAR_APPEND([emacs_config_features], ["$optsep$opt"])
    optsep=' '
done
AC_DEFINE_UNQUOTED(EMACS_CONFIG_FEATURES, "${emacs_config_features}",
  [Summary of some of the main features enabled by configure.])

echo "  Does Emacs use -lXaw3d?                                 ${HAVE_XAW3D}"
echo "  Does Emacs use -lXpm?                                   ${HAVE_XPM}"
echo "  Does Emacs use -ljpeg?                                  ${HAVE_JPEG}"
echo "  Does Emacs use -ltiff?                                  ${HAVE_TIFF}"
echo "  Does Emacs use a gif library?                           ${HAVE_GIF} $LIBGIF"
echo "  Does Emacs use a png library?                           ${HAVE_PNG} $LIBPNG"
echo "  Does Emacs use -lrsvg-2?                                ${HAVE_RSVG}"
echo "  Does Emacs use imagemagick?                             ${HAVE_IMAGEMAGICK}"

echo "  Does Emacs support sound?                               ${HAVE_SOUND}"

echo "  Does Emacs use -lgpm?                                   ${HAVE_GPM}"
echo "  Does Emacs use -ldbus?                                  ${HAVE_DBUS}"
echo "  Does Emacs use -lgconf?                                 ${HAVE_GCONF}"
echo "  Does Emacs use GSettings?                               ${HAVE_GSETTINGS}"
echo "  Does Emacs use a file notification library?             ${NOTIFY_SUMMARY}"
echo "  Does Emacs use access control lists?                    ${ACL_SUMMARY}"
echo "  Does Emacs use -lselinux?                               ${HAVE_LIBSELINUX}"
echo "  Does Emacs use -lgnutls?                                ${HAVE_GNUTLS}"
echo "  Does Emacs use -lxml2?                                  ${HAVE_LIBXML2}"

echo "  Does Emacs use -lfreetype?                              ${HAVE_FREETYPE}"
echo "  Does Emacs use -lm17n-flt?                              ${HAVE_M17N_FLT}"
echo "  Does Emacs use -lotf?                                   ${HAVE_LIBOTF}"
echo "  Does Emacs use -lxft?                                   ${HAVE_XFT}"
echo "  Does Emacs directly use zlib?                           ${HAVE_ZLIB}"

echo "  Does Emacs use toolkit scroll bars?                     ${USE_TOOLKIT_SCROLL_BARS}"
echo

if test -n "${EMACSDATA}"; then
   echo "  Environment variable EMACSDATA set to:                  $EMACSDATA"
fi
if test -n "${EMACSDOC}"; then
   echo "  Environment variable EMACSDOC set to:                   $EMACSDOC"
fi

echo

if test "$HAVE_NS" = "yes"; then
   echo
   echo "You must run \"${MAKE-make} install\" in order to test the built application.
The installed application will go to nextstep/Emacs.app and can be
run or moved from there."
   if test "$EN_NS_SELF_CONTAINED" = "yes"; then
      echo "The application will be fully self-contained."
    else
      echo "The lisp resources for the application will be installed under ${prefix}.
You may need to run \"${MAKE-make} install\" with sudo.  The application will fail
to run if these resources are not installed."
   fi
   echo
fi

if test "${opsys}" = "cygwin"; then
  case `uname -r` in
    1.5.*) AC_MSG_WARN([[building Emacs on Cygwin 1.5 is not supported.]])
           echo
	   ;;
  esac
fi

# Remove any trailing slashes in these variables.
[test "${prefix}" != NONE &&
  prefix=`echo "${prefix}" | sed 's,\([^/]\)/*$,\1,'`
test "${exec_prefix}" != NONE &&
  exec_prefix=`echo "${exec_prefix}" | sed 's,\([^/]\)/*$,\1,'`]

if test "$HAVE_NS" = "yes"; then
  if test "$NS_IMPL_GNUSTEP" = yes; then
    AC_CONFIG_FILES([nextstep/GNUstep/Emacs.base/Resources/Info-gnustep.plist:nextstep/templates/Info-gnustep.plist.in \
      nextstep/GNUstep/Emacs.base/Resources/Emacs.desktop:nextstep/templates/Emacs.desktop.in])
    ns_check_file=Resources/Info-gnustep.plist
  else
    AC_CONFIG_FILES([nextstep/Cocoa/Emacs.base/Contents/Info.plist:nextstep/templates/Info.plist.in \
      nextstep/Cocoa/Emacs.base/Contents/Resources/English.lproj/InfoPlist.strings:nextstep/templates/InfoPlist.strings.in])
    ns_check_file=Contents/Info.plist
  fi
  AC_SUBST(ns_check_file)
fi

dnl Obviously there is duplication here wrt $SUBDIR_MAKEFILES.
dnl You _can_ use that variable in AC_CONFIG_FILES, so long as any directory
dnl using automake (ie lib/) is explicitly listed and not "hidden" in a variable
dnl (else you get "no `Makefile.am' found for any configure output").
dnl This will work, but you get a config.status that is not quite right
dnl (see http://lists.gnu.org/archive/html/bug-autoconf/2008-08/msg00028.html).
dnl That doesn't have any obvious consequences for Emacs, but on the whole
dnl it seems better to just live with the duplication.
SUBDIR_MAKEFILES="lib/Makefile lib-src/Makefile oldXMenu/Makefile doc/emacs/Makefile doc/misc/Makefile doc/lispintro/Makefile doc/lispref/Makefile src/Makefile lwlib/Makefile lisp/Makefile leim/Makefile nextstep/Makefile nt/Makefile"

AC_CONFIG_FILES([Makefile lib/Makefile lib-src/Makefile oldXMenu/Makefile \
       doc/emacs/Makefile doc/misc/Makefile doc/lispintro/Makefile \
       doc/lispref/Makefile src/Makefile lwlib/Makefile lisp/Makefile \
       leim/Makefile nextstep/Makefile nt/Makefile])

dnl test/ is not present in release tarfiles.
opt_makefile=test/automated/Makefile

if test -f "$srcdir/$opt_makefile.in"; then
  SUBDIR_MAKEFILES="$SUBDIR_MAKEFILES $opt_makefile"
  dnl Again, it's best not to use a variable.  Though you can add
  dnl ", [], [opt_makefile='$opt_makefile']" and it should work.
  AC_CONFIG_FILES([test/automated/Makefile])
fi


dnl The admin/ directory used to be excluded from tarfiles.
if test -d $srcdir/admin; then
  SUBDIR_MAKEFILES="$SUBDIR_MAKEFILES admin/unidata/Makefile admin/grammars/Makefile"
  AC_CONFIG_FILES([admin/unidata/Makefile])
  AC_CONFIG_FILES([admin/grammars/Makefile])
fi                              dnl -d admin


SUBDIR_MAKEFILES_IN=`echo " ${SUBDIR_MAKEFILES}" | sed -e 's| | $(srcdir)/|g' -e 's|Makefile|Makefile.in|g'`

AC_SUBST(SUBDIR_MAKEFILES_IN)

dnl You might wonder (I did) why epaths.h is generated by running make,
dnl rather than just letting configure generate it from epaths.in.
dnl One reason is that the various paths are not fully expanded (see above);
dnl eg gamedir=${prefix}/var/games/emacs.
dnl Secondly, the GNU Coding standards require that one should be able
dnl to run `make prefix=/some/where/else' and override the values set
dnl by configure.  This also explains the `move-if-change' test and
dnl the use of force in the `epaths-force' rule in Makefile.in.
AC_CONFIG_COMMANDS([src/epaths.h], [
if test "${opsys}" = "mingw"; then
  ${MAKE-make} MAKEFILE_NAME=do-not-make-Makefile epaths-force-w32
else
  ${MAKE-make} MAKEFILE_NAME=do-not-make-Makefile epaths-force
fi || AC_MSG_ERROR(['src/epaths.h' could not be made.])
], [GCC="$GCC" CPPFLAGS="$CPPFLAGS" opsys="$opsys"])

dnl NB we have to cheat and use the ac_... version because abs_top_srcdir
dnl is not yet set, sigh.  Or we could use ../$srcdir/src/.gdbinit,
dnl or a symlink?
AC_CONFIG_COMMANDS([src/.gdbinit], [
if test ! -f src/.gdbinit && test -f "$srcdir/src/.gdbinit"; then
  echo "source $ac_abs_top_srcdir/src/.gdbinit" > src/.gdbinit
fi
])

AC_OUTPUT

test "$MAKE" = make || AC_MSG_NOTICE([Now you can run '$MAKE'.])

[-- Attachment #3: Makefile.in --]
[-- Type: application/octet-stream, Size: 21929 bytes --]

### @configure_input@

# Copyright (C) 1985, 1987-1988, 1993-1995, 1999-2014
#   Free Software Foundation, Inc.

# This file is part of GNU Emacs.

# GNU Emacs is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.

# GNU Emacs is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.


# Note that this file is edited by msdos/sed1v2.inp for MSDOS.  That
# script may need modifying in sync with changes made here.  Try to
# avoid shell-ism because the DOS build has to use the DOS shell.

SHELL = @SHELL@

# Here are the things that we expect ../configure to edit.
# We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
srcdir = @srcdir@
top_srcdir = @top_srcdir@
# MinGW CPPFLAGS may use this.
abs_top_srcdir=@abs_top_srcdir@
ntsource = $(top_srcdir)/nt
VPATH = $(srcdir)
CC = @CC@
WINDRES = @WINDRES@
CFLAGS = @CFLAGS@
CPPFLAGS = @CPPFLAGS@
LDFLAGS = @LDFLAGS@
EXEEXT = @EXEEXT@
version = @version@
# Substitute an assignment for the MAKE variable, because
# BSD doesn't have it as a default.
@SET_MAKE@
MKDIR_P = @MKDIR_P@
# Don't use LIBS.  configure puts stuff in it that either shouldn't be
# linked with Emacs or is duplicated by the other stuff below.
# LIBS = @LIBS@
LIBOBJS = @LIBOBJS@

lispsource = $(top_srcdir)/lisp
lib = ../lib
libsrc = ../lib-src
etc = ../etc
leimdir = ${lispsource}/leim
oldXMenudir = ../oldXMenu
lwlibdir = ../lwlib

# Configuration files for .o files to depend on.
config_h = config.h $(srcdir)/conf_post.h

bootstrap_exe = ../src/bootstrap-emacs$(EXEEXT)

## ns-app if HAVE_NS, else empty.
OTHER_FILES = @OTHER_FILES@

## Flags to pass for profiling builds
PROFILING_CFLAGS = @PROFILING_CFLAGS@

## Flags to pass to the compiler to enable build warnings
WARN_CFLAGS = @WARN_CFLAGS@
WERROR_CFLAGS = @WERROR_CFLAGS@

## Machine-specific CFLAGS.
C_SWITCH_MACHINE=@C_SWITCH_MACHINE@
## System-specific CFLAGS.
C_SWITCH_SYSTEM=@C_SWITCH_SYSTEM@

GNUSTEP_CFLAGS=@GNUSTEP_CFLAGS@
PNG_CFLAGS=@PNG_CFLAGS@

## Define C_SWITCH_X_SITE to contain any special flags your compiler
## may need to deal with X Windows.  For instance, if you've defined
## HAVE_X_WINDOWS and your X include files aren't in a place that your
## compiler can find on its own, you might want to add "-I/..." or
## something similar.  This is normally set by configure.
C_SWITCH_X_SITE=@C_SWITCH_X_SITE@

## Define LD_SWITCH_X_SITE to contain any special flags your loader
## may need to deal with X Windows.  For instance, if your X libraries
## aren't in a place that your loader can find on its own, you might
## want to add "-L/..." or something similar.  Only used if
## HAVE_X_WINDOWS.
## FIXME? configure sets a value for this, but it has never been
## substituted in this or any other Makefile. Cf C_SWITCH_X_SITE.
LD_SWITCH_X_SITE=

## This must come before LD_SWITCH_SYSTEM.
## If needed, a -rpath option that says where to find X windows at run time.
LD_SWITCH_X_SITE_RPATH=@LD_SWITCH_X_SITE_RPATH@

## System-specific LDFLAGS.
LD_SWITCH_SYSTEM=@LD_SWITCH_SYSTEM@

## This holds any special options for linking temacs only (i.e., not
## used by configure).
LD_SWITCH_SYSTEM_TEMACS=@LD_SWITCH_SYSTEM_TEMACS@

## Flags to pass to ld only for temacs.
TEMACS_LDFLAGS = $(LD_SWITCH_SYSTEM) $(LD_SWITCH_SYSTEM_TEMACS)

## If available, the names of the paxctl and setfattr programs.
## On grsecurity/PaX systems, unexec will fail due to a gap between
## the bss section and the heap.  Older versions need paxctl to work
## around this, newer ones setfattr.  See Bug#11398 and Bug#16343.
PAXCTL = @PAXCTL@
SETFATTR = @SETFATTR@

## Some systems define this to request special libraries.
LIBS_SYSTEM=@LIBS_SYSTEM@

## -lm, or empty.
LIB_MATH=@LIB_MATH@

## -lpthread, or empty.
LIB_PTHREAD=@LIB_PTHREAD@

LIBIMAGE=@LIBTIFF@ @LIBJPEG@ @LIBPNG@ @LIBGIF@ @LIBXPM@

XFT_LIBS=@XFT_LIBS@
LIBX_EXTRA=-lX11 $(XFT_LIBS)

FONTCONFIG_CFLAGS = @FONTCONFIG_CFLAGS@
FONTCONFIG_LIBS = @FONTCONFIG_LIBS@
FREETYPE_CFLAGS = @FREETYPE_CFLAGS@
FREETYPE_LIBS = @FREETYPE_LIBS@
LIBOTF_CFLAGS = @LIBOTF_CFLAGS@
LIBOTF_LIBS = @LIBOTF_LIBS@
M17N_FLT_CFLAGS = @M17N_FLT_CFLAGS@
M17N_FLT_LIBS = @M17N_FLT_LIBS@

LIB_ACL=@LIB_ACL@
LIB_CLOCK_GETTIME=@LIB_CLOCK_GETTIME@
LIB_EACCESS=@LIB_EACCESS@
LIB_FDATASYNC=@LIB_FDATASYNC@
LIB_TIMER_TIME=@LIB_TIMER_TIME@

DBUS_CFLAGS = @DBUS_CFLAGS@
DBUS_LIBS = @DBUS_LIBS@
## dbusbind.o if HAVE_DBUS, else empty.
DBUS_OBJ = @DBUS_OBJ@

LIB_EXECINFO=@LIB_EXECINFO@

SETTINGS_CFLAGS = @SETTINGS_CFLAGS@
SETTINGS_LIBS = @SETTINGS_LIBS@

## gtkutil.o if USE_GTK, else empty.
GTK_OBJ=@GTK_OBJ@

## gfilenotify.o if HAVE_GFILENOTIFY.
## inotify.o if HAVE_INOTIFY.
## w32notify.o if HAVE_W32NOTIFY.
NOTIFY_OBJ = @NOTIFY_OBJ@
GFILENOTIFY_CFLAGS = @GFILENOTIFY_CFLAGS@
GFILENOTIFY_LIBS = @GFILENOTIFY_LIBS@

## -ltermcap, or -lncurses, or -lcurses, or "".
LIBS_TERMCAP=@LIBS_TERMCAP@
## terminfo.o if TERMINFO, else tparam.o.
TERMCAP_OBJ=@TERMCAP_OBJ@

LIBXMU=@LIBXMU@

LIBXSM=@LIBXSM@

LIBXTR6=@LIBXTR6@

## $(LIBXMU) -lXt $(LIBXTR6) -lXext if USE_X_TOOLKIT, else $(LIBXSM).
## Only used if HAVE_X_WINDOWS.
LIBXT_OTHER=@LIBXT_OTHER@

## If !HAVE_X11 || USE_GTK, empty.
## Else if USE_X_TOOLKIT, $(lwlibdir)/liblw.a.
## Else $(oldXMenudir)/libXMenu11.a.
LIBXMENU=@LIBXMENU@

## xmenu.o if HAVE_X_WINDOWS, else empty.
XMENU_OBJ=@XMENU_OBJ@
## xterm.o xfns.o xselect.o xrdb.o xsmfns.o xsettings.o if
## HAVE_X_WINDOWS, else empty.
XOBJ=@XOBJ@

# xgselect.o if linking with GLib, else empty
XGSELOBJ=@XGSELOBJ@

TOOLKIT_LIBW=@TOOLKIT_LIBW@

## Only used if HAVE_X11, in LIBX_OTHER.
LIBXT=$(TOOLKIT_LIBW) $(LIBXT_OTHER)

## If HAVE_X11, $(LIBXT) $(LIBX_EXTRA), else empty.
LIBX_OTHER=@LIBX_OTHER@

## LIBXMENU is empty if !HAVE_X_WINDOWS.
## LD_SWITCH_X_SITE should not be used if not using X, but nothing
## sets it at present, and if something ever does, it should be
## configure, which should set it to nil in non-X builds.
LIBX_BASE=$(LIBXMENU) $(LD_SWITCH_X_SITE)

## Only used for GNUstep
LIBS_GNUSTEP=@LIBS_GNUSTEP@

LIBSOUND= @LIBSOUND@
CFLAGS_SOUND= @CFLAGS_SOUND@

RSVG_LIBS= @RSVG_LIBS@
RSVG_CFLAGS= @RSVG_CFLAGS@

IMAGEMAGICK_LIBS= @IMAGEMAGICK_LIBS@
IMAGEMAGICK_CFLAGS= @IMAGEMAGICK_CFLAGS@

LIBXML2_LIBS = @LIBXML2_LIBS@
LIBXML2_CFLAGS = @LIBXML2_CFLAGS@

LIBZ = @LIBZ@

XRANDR_LIBS = @XRANDR_LIBS@
XRANDR_CFLAGS = @XRANDR_CFLAGS@

XINERAMA_LIBS = @XINERAMA_LIBS@
XINERAMA_CFLAGS = @XINERAMA_CFLAGS@

XFIXES_LIBS = @XFIXES_LIBS@
XFIXES_CFLAGS = @XFIXES_CFLAGS@

## widget.o if USE_X_TOOLKIT, otherwise empty.
WIDGET_OBJ=@WIDGET_OBJ@

## sheap.o if CYGWIN, otherwise empty.
CYGWIN_OBJ=@CYGWIN_OBJ@

## fontset.o fringe.o image.o if we have any window system
WINDOW_SYSTEM_OBJ=@WINDOW_SYSTEM_OBJ@

## dosfns.o msdos.o w16select.o if MSDOS.
MSDOS_OBJ =
## w16select.o termcap.o if MSDOS && HAVE_X_WINDOWS.
MSDOS_X_OBJ =

NS_OBJ=@NS_OBJ@
## nsterm.o nsfns.o nsmenu.o nsselect.o nsimage.o nsfont.o macfont.o if HAVE_NS.
NS_OBJC_OBJ=@NS_OBJC_OBJ@
## Only set if NS_IMPL_GNUSTEP.
GNU_OBJC_CFLAGS=@GNU_OBJC_CFLAGS@
## w32fns.o w32menu.c w32reg.o fringe.o fontset.o w32font.o w32term.o
## w32xfns.o w32select.o image.o w32uniscribe.o if HAVE_W32, else
## empty.
W32_OBJ=@W32_OBJ@
## -lkernel32 -luser32 -lgdi32 -lole32 -lcomdlg32 lusp10 -lcomctl32
## --lwinspool if HAVE_W32, else empty.
W32_LIBS=@W32_LIBS@

## emacs.res if HAVE_W32
EMACSRES = @EMACSRES@
## emacs-*.manifest if HAVE_W32
EMACS_MANIFEST = @EMACS_MANIFEST@
## If HAVE_W32, compiler arguments for including
## the resource file in the binary.
## Cygwin: -Wl,emacs.res
## MinGW: emacs.res
W32_RES_LINK=@W32_RES_LINK@

## Empty if !HAVE_X_WINDOWS
## xfont.o ftfont.o xftfont.o ftxfont.o if HAVE_XFT
## xfont.o ftfont.o ftxfont.o if HAVE_FREETYPE
## else xfont.o
FONT_OBJ=@FONT_OBJ@

## Empty for MinGW, cm.o for the rest.
CM_OBJ=@CM_OBJ@

LIBGPM = @LIBGPM@

## -lresolv, or empty.
LIBRESOLV = @LIBRESOLV@

LIBSELINUX_LIBS = @LIBSELINUX_LIBS@

LIBGNUTLS_LIBS = @LIBGNUTLS_LIBS@
LIBGNUTLS_CFLAGS = @LIBGNUTLS_CFLAGS@

INTERVALS_H = dispextern.h intervals.h composite.h

GETLOADAVG_LIBS = @GETLOADAVG_LIBS@

RUN_TEMACS = ./temacs

## Static heap size for temacs on MinGW.
EMACS_HEAPSIZE = @EMACS_HEAPSIZE@

UNEXEC_OBJ = @UNEXEC_OBJ@

CANNOT_DUMP=@CANNOT_DUMP@

DEPDIR=deps
## -MMD -MF $(DEPDIR)/$*.d if AUTO_DEPEND; else empty.
DEPFLAGS=@DEPFLAGS@
## ${MKDIR_P} ${DEPDIR} (if AUTO_DEPEND); else ':'.
MKDEPDIR=@MKDEPDIR@

## DO NOT use -R.  There is a special hack described in lastfile.c
## which is used instead.  Some initialized data areas are modified
## at initial startup, then labeled as part of the text area when
## Emacs is dumped for the first time, and never changed again.
##
## -Demacs is needed to make some files produce the correct version
## for use in Emacs.
##
## FIXME? MYCPPFLAGS only referenced in etc/DEBUG.
ALL_CFLAGS=-Demacs $(MYCPPFLAGS) -I. -I$(srcdir) \
  -I$(lib) -I$(top_srcdir)/lib \
  $(C_SWITCH_MACHINE) $(C_SWITCH_SYSTEM) $(C_SWITCH_X_SITE) \
  $(GNUSTEP_CFLAGS) $(CFLAGS_SOUND) $(RSVG_CFLAGS) $(IMAGEMAGICK_CFLAGS) \
  $(PNG_CFLAGS) $(LIBXML2_CFLAGS) $(DBUS_CFLAGS) \
  $(XRANDR_CFLAGS) $(XINERAMA_CFLAGS) $(XFIXES_CFLAGS) \
  $(SETTINGS_CFLAGS) $(FREETYPE_CFLAGS) $(FONTCONFIG_CFLAGS) \
  $(LIBOTF_CFLAGS) $(M17N_FLT_CFLAGS) $(DEPFLAGS) \
  $(LIBGNUTLS_CFLAGS) $(GFILENOTIFY_CFLAGS) \
  $(WARN_CFLAGS) $(WERROR_CFLAGS) $(CFLAGS)
ALL_OBJC_CFLAGS=$(ALL_CFLAGS) $(GNU_OBJC_CFLAGS)

.SUFFIXES: .m
.c.o:
	@$(MKDEPDIR)
	$(CC) -c $(CPPFLAGS) $(ALL_CFLAGS) $(PROFILING_CFLAGS) $<
.m.o:
	@$(MKDEPDIR)
	$(CC) -c $(CPPFLAGS) $(ALL_OBJC_CFLAGS) $(PROFILING_CFLAGS) $<

## lastfile must follow all files whose initialized data areas should
## be dumped as pure by dump-emacs.
base_obj = dispnew.o frame.o scroll.o xdisp.o menu.o $(XMENU_OBJ) window.o \
	charset.o coding.o category.o ccl.o character.o chartab.o bidi.o \
	$(CM_OBJ) term.o terminal.o xfaces.o $(XOBJ) $(GTK_OBJ) $(DBUS_OBJ) \
	emacs.o keyboard.o macros.o keymap.o sysdep.o \
	buffer.o filelock.o insdel.o marker.o \
	minibuf.o fileio.o dired.o \
	cmds.o casetab.o casefiddle.o indent.o search.o regex.o undo.o \
	alloc.o data.o doc.o editfns.o callint.o \
	eval.o floatfns.o fns.o font.o print.o lread.o \
	syntax.o $(UNEXEC_OBJ) bytecode.o \
	process.o gnutls.o callproc.o \
	region-cache.o sound.o atimer.o \
	doprnt.o intervals.o textprop.o composite.o xml.o $(NOTIFY_OBJ) \
	profiler.o decompress.o \
	$(MSDOS_OBJ) $(MSDOS_X_OBJ) $(NS_OBJ) $(CYGWIN_OBJ) $(FONT_OBJ) \
	$(W32_OBJ) $(WINDOW_SYSTEM_OBJ) $(XGSELOBJ)
obj = $(base_obj) $(NS_OBJC_OBJ)

## Object files used on some machine or other.
## These go in the DOC file on all machines in case they are needed.
## Some of them have no DOC entries, but it does no harm to have them
## in the list, in case they ever add any such entries.
SOME_MACHINE_OBJECTS = dosfns.o msdos.o \
  xterm.o xfns.o xmenu.o xselect.o xrdb.o xsmfns.o fringe.o image.o \
  fontset.o dbusbind.o cygw32.o \
  nsterm.o nsfns.o nsmenu.o nsselect.o nsimage.o nsfont.o macfont.o \
  w32.o w32console.o w32fns.o w32heap.o w32inevt.o w32notify.o \
  w32menu.o w32proc.o w32reg.o w32select.o w32term.o w32xfns.o \
  w16select.o widget.o xfont.o ftfont.o xftfont.o ftxfont.o gtkutil.o \
  xsettings.o xgselect.o termcap.o

## gmalloc.o if !SYSTEM_MALLOC && !DOUG_LEA_MALLOC, else empty.
GMALLOC_OBJ=@GMALLOC_OBJ@

## vm-limit.o if !SYSTEM_MALLOC, else empty.
VMLIMIT_OBJ=@VMLIMIT_OBJ@

## ralloc.o if !SYSTEM_MALLOC && REL_ALLOC, else empty.
RALLOC_OBJ=@RALLOC_OBJ@

## Empty on Cygwin and MinGW, lastfile.o elsewhere.
PRE_ALLOC_OBJ=@PRE_ALLOC_OBJ@
## lastfile.o on Cygwin and MinGW, empty elsewhere.
POST_ALLOC_OBJ=@POST_ALLOC_OBJ@

## List of object files that make-docfile should not be told about.
otherobj= $(TERMCAP_OBJ) $(PRE_ALLOC_OBJ) $(GMALLOC_OBJ) $(RALLOC_OBJ) \
  $(POST_ALLOC_OBJ) $(WIDGET_OBJ) $(LIBOBJS)

## All object files linked into temacs.  $(VMLIMIT_OBJ) should be first.
## (On MinGW, firstfile.o should be before vm-limit.o.)
FIRSTFILE_OBJ=@FIRSTFILE_OBJ@
ALLOBJS = $(FIRSTFILE_OBJ) $(VMLIMIT_OBJ) $(obj) $(otherobj)

## Configure inserts the file lisp.mk at this point, defining $lisp.
@lisp_frag@


## Construct full set of libraries to be linked.
LIBES = $(LIBS) $(W32_LIBS) $(LIBS_GNUSTEP) $(LIBX_BASE) $(LIBIMAGE) \
   $(LIBX_OTHER) $(LIBSOUND) \
   $(RSVG_LIBS) $(IMAGEMAGICK_LIBS) $(LIB_ACL) $(LIB_CLOCK_GETTIME) \
   $(LIB_EACCESS) $(LIB_FDATASYNC) $(LIB_TIMER_TIME) $(DBUS_LIBS) \
   $(LIB_EXECINFO) $(XRANDR_LIBS) $(XINERAMA_LIBS) $(XFIXES_LIBS) \
   $(LIBXML2_LIBS) $(LIBGPM) $(LIBRESOLV) $(LIBS_SYSTEM) \
   $(LIBS_TERMCAP) $(GETLOADAVG_LIBS) $(SETTINGS_LIBS) $(LIBSELINUX_LIBS) \
   $(FREETYPE_LIBS) $(FONTCONFIG_LIBS) $(LIBOTF_LIBS) $(M17N_FLT_LIBS) \
   $(LIBGNUTLS_LIBS) $(LIB_PTHREAD) \
   $(GFILENOTIFY_LIBS) $(LIB_MATH) $(LIBZ)

all: emacs$(EXEEXT) $(OTHER_FILES)
.PHONY: all

$(leimdir)/leim-list.el: bootstrap-emacs$(EXEEXT)
	$(MAKE) -C ../leim leim-list.el EMACS="$(bootstrap_exe)"

$(srcdir)/macuvs.h $(lispsource)/international/charprop.el: \
  bootstrap-emacs$(EXEEXT)
	$(MAKE) -C ../admin/unidata all EMACS="../$(bootstrap_exe)"

## The dumped Emacs is as functional and more efficient than
## bootstrap-emacs, so we replace the latter with the former.
## Strictly speaking, emacs does not depend directly on all of $lisp,
## since not all pieces are used on all platforms.  But DOC depends
## on all of $lisp, and emacs depends on DOC, so it is ok to use $lisp here.
emacs$(EXEEXT): temacs$(EXEEXT) \
                $(etc)/DOC $(lisp) $(leimdir)/leim-list.el \
                $(lispsource)/international/charprop.el
	if test "$(CANNOT_DUMP)" = "yes"; then \
	  rm -f emacs$(EXEEXT); \
	  ln temacs$(EXEEXT) emacs$(EXEEXT); \
	else \
	  LC_ALL=C $(RUN_TEMACS) -batch -l loadup dump || exit 1; \
	  test "X$(PAXCTL)" = X || $(PAXCTL) -zex emacs$(EXEEXT); \
	  ln -vf emacs$(EXEEXT) bootstrap-emacs$(EXEEXT); \
	fi

## We run make-docfile twice because the command line may get too long
## on some systems.  The sed command operating on lisp.mk also reduces
## the length of the command line.  Unfortunately, no-one has any idea
## exactly how long the maximum safe command line length is on all the
## various systems that Emacs supports.  Obviously, the length depends
## on what your value of $srcdir is.  If the length restriction goes
## away, lisp.mk can be merged back into this file.
##
## $(SOME_MACHINE_OBJECTS) comes before $(obj) because some files may
## or may not be included in $(obj), but they are always included in
## $(SOME_MACHINE_OBJECTS).  Since a file is processed when it is mentioned
## for the first time, this prevents any variation between configurations
## in the contents of the DOC file.
##
$(etc)/DOC: $(libsrc)/make-docfile$(EXEEXT) $(obj) $(lisp)
	$(MKDIR_P) $(etc)
	-rm -f $(etc)/DOC
	$(libsrc)/make-docfile -d $(srcdir) $(SOME_MACHINE_OBJECTS) $(obj) > $(etc)/DOC
	$(libsrc)/make-docfile -a $(etc)/DOC -d $(lispsource) `sed -n -e 's| \\\\||' -e 's|^[ 	]*$$(lispsource)/||p' $(srcdir)/lisp.mk`

$(libsrc)/make-docfile$(EXEEXT):
	$(MAKE) -C $(libsrc) make-docfile$(EXEEXT)

buildobj.h: Makefile
	for i in $(ALLOBJS); do \
	  echo "$$i" | sed 's,.*/,,; s/\.obj$$/\.o/; s/^/"/; s/$$/",/' \
	    || exit; \
	done >$@.tmp
	mv $@.tmp $@

globals.h: gl-stamp; @true

GLOBAL_SOURCES = $(base_obj:.o=.c) $(NS_OBJC_OBJ:.o=.m)

gl-stamp: $(libsrc)/make-docfile$(EXEEXT) $(GLOBAL_SOURCES)
	$(libsrc)/make-docfile -d $(srcdir) -g $(obj) > gl.tmp
	$(top_srcdir)/build-aux/move-if-change gl.tmp globals.h
	echo timestamp > $@

$(ALLOBJS): globals.h

$(lib)/libgnu.a: $(config_h)
	$(MAKE) -C $(lib) libgnu.a

## We have to create $(etc) here because init_cmdargs tests its
## existence when setting Vinstallation_directory (FIXME?).
## This goes on to affect various things, and the emacs binary fails
## to start if Vinstallation_directory has the wrong value.
temacs$(EXEEXT): $(LIBXMENU) $(ALLOBJS) \
	         $(lib)/libgnu.a $(EMACSRES)
	$(CC) $(ALL_CFLAGS) $(TEMACS_LDFLAGS) $(LDFLAGS) \
	  -o temacs $(ALLOBJS) $(lib)/libgnu.a $(W32_RES_LINK) $(LIBES)
	$(MKDIR_P) $(etc)
	test "$(CANNOT_DUMP)" = "yes" || \
	  test "X$(PAXCTL)" = X || $(PAXCTL) -r temacs$(EXEEXT)
	test "$(CANNOT_DUMP)" = "yes" || test -z "$(SETFATTR)" || \
	  $(SETFATTR) -n user.pax.flags -v r $@

## The following oldxmenu-related rules are only (possibly) used if
## HAVE_X11 && !USE_GTK, but there is no harm in always defining them.
$(lwlibdir)/liblw.a: $(config_h) globals.h lisp.h FORCE
	$(MAKE) -C $(lwlibdir) liblw.a
$(oldXMenudir)/libXMenu11.a: FORCE
	$(MAKE) -C $(oldXMenudir) libXMenu11.a
FORCE:
.PHONY: FORCE

ACLOCAL_INPUTS = $(top_srcdir)/configure.ac $(wildcard $(top_srcdir)/m4/*.m4)
AUTOCONF_INPUTS = $(top_srcdir)/configure.ac $(top_srcdir)/aclocal.m4
$(top_srcdir)/aclocal.m4: $(ACLOCAL_INPUTS)
$(top_srcdir)/configure config.in: $(AUTOCONF_INPUTS)
.PRECIOUS: ../config.status Makefile
../config.status: $(top_srcdir)/configure $(top_srcdir)/lisp/version.el
Makefile: ../config.status $(srcdir)/Makefile.in
$(top_srcdir)/aclocal.m4 $(top_srcdir)/configure config.in ../config.status \
  Makefile:
	$(MAKE) -C .. am--refresh

doc.o: buildobj.h

emacs.res: $(ntsource)/emacs.rc \
	   $(ntsource)/icons/emacs.ico \
	   $(ntsource)/$(EMACS_MANIFEST)
	$(WINDRES) -O COFF --include-dir=$(top_srcdir)/nt \
	  -o $@ $(ntsource)/emacs.rc

.PHONY: ns-app
ns-app: emacs$(EXEEXT)
	$(MAKE) -C ../nextstep all

.PHONY: mostlyclean clean bootstrap-clean distclean maintainer-clean
.PHONY: versionclean extraclean

mostlyclean:
	rm -f temacs$(EXEEXT) core *.core \#* *.o
	rm -f ../etc/DOC
	rm -f bootstrap-emacs$(EXEEXT) emacs-$(version)$(EXEEXT)
	rm -f buildobj.h
	rm -f globals.h gl-stamp
	rm -f *.res *.tmp
clean: mostlyclean
	rm -f emacs-*.*.*$(EXEEXT) emacs$(EXEEXT)
	-rm -rf $(DEPDIR)

## bootstrap-clean is used to clean up just before a bootstrap.
## It should remove all files generated during a compilation/bootstrap,
## but not things like config.status or TAGS.
bootstrap-clean: clean
	rm -f epaths.h config.h config.stamp stamp-h1
	if test -f ./.gdbinit; then \
	  mv ./.gdbinit ./.gdbinit.save; \
	  if test -f "$(srcdir)/.gdbinit"; then rm -f ./.gdbinit.save; \
	  else mv ./.gdbinit.save ./.gdbinit; fi; \
	fi

distclean: bootstrap-clean
	rm -f Makefile

maintainer-clean: distclean
	rm -f TAGS
versionclean:
	-rm -f emacs$(EXEEXT) emacs-*.*.*$(EXEEXT) ../etc/DOC*
extraclean: distclean
	-rm -f *~ \#*


ETAGS = ../lib-src/etags

ctagsfiles1 = [xyzXYZ]*.[hc]
ctagsfiles2 = [a-wA-W]*.[hc]
ctagsfiles3 = [a-zA-Z]*.m

## FIXME? In out-of-tree builds, should TAGS be generated in srcdir?

## This does not need to depend on ../lisp and ../lwlib TAGS files,
## because etags "--include" only includes a pointer to the file,
## rather than the file contents.
TAGS: $(srcdir)/$(ctagsfiles1) $(srcdir)/$(ctagsfiles2) $(srcdir)/$(ctagsfiles3)
	"$(ETAGS)" --include=../lisp/TAGS --include=$(lwlibdir)/TAGS \
	  --regex='{c}/[ 	]*DEFVAR_[A-Z_ 	(]+"\([^"]+\)"/' \
	  $(srcdir)/$(ctagsfiles1) $(srcdir)/$(ctagsfiles2) \
	  --regex='{objc}/[ 	]*DEFVAR_[A-Z_ 	(]+"\([^"]+\)"/' \
	  $(srcdir)/$(ctagsfiles3)

## Arrange to make tags tables for ../lisp and ../lwlib,
## which the above TAGS file for the C files includes by reference.
../lisp/TAGS:
	$(MAKE) -C ../lisp TAGS ETAGS="$(ETAGS)"

$(lwlibdir)/TAGS:
	$(MAKE) -C $(lwlibdir) TAGS ETAGS="$(ETAGS)"

tags: TAGS ../lisp/TAGS $(lwlibdir)/TAGS
.PHONY: tags


### Bootstrapping.

## Bootstrapping right is difficult because of the circular dependencies.
## Furthermore, we have to deal with the fact that many compilation targets
## such as loaddefs.el or *.elc can typically be produced by any old
## Emacs executable, so we would like to avoid rebuilding them whenever
## we build a new Emacs executable.
##
## (In other words, changing a single file src/foo.c would force
## dumping a new bootstrap-emacs, then re-byte-compiling all preloaded
## elisp files, and only then dump the actual src/emacs, which is not
## wrong, but is overkill in 99.99% of the cases.)
##
## To solve the circularity, we use 2 different Emacs executables,
## "emacs" is the main target and "bootstrap-emacs" is the one used
## to build the *.elc and loaddefs.el files.
## To solve the freshness issue, in the past we tried various clever tricks,
## but now that we require GNU make, we can simply specify
## bootstrap-emacs$(EXEEXT) as an order-only prerequisite.

%.elc: %.el | bootstrap-emacs$(EXEEXT)
	@$(MAKE) -C ../lisp compile-onefile THEFILE=$< EMACS="$(bootstrap_exe)"

## VCSWITNESS points to the file that holds info about the current checkout.
## We use it as a heuristic to decide when to rebuild loaddefs.el.
## If empty it is ignored; the parent makefile can set it to some other value.
VCSWITNESS =

$(lispsource)/loaddefs.el: $(VCSWITNESS) | bootstrap-emacs$(EXEEXT)
	$(MAKE) -C ../lisp autoloads EMACS="$(bootstrap_exe)"

## Dump an Emacs executable named bootstrap-emacs containing the
## files from loadup.el in source form.
bootstrap-emacs$(EXEEXT): temacs$(EXEEXT)
	$(MAKE) -C ../lisp update-subdirs
	if test "$(CANNOT_DUMP)" = "yes"; then \
	  rm -f bootstrap-emacs$(EXEEXT); \
	  ln temacs$(EXEEXT) bootstrap-emacs$(EXEEXT); \
	else \
	  $(RUN_TEMACS) --batch --load loadup bootstrap || exit 1; \
	  test "X$(PAXCTL)" = X || $(PAXCTL) -zex emacs$(EXEEXT); \
	  mv -f emacs$(EXEEXT) bootstrap-emacs$(EXEEXT); \
	fi
	@: Compile some files earlier to speed up further compilation.
	$(MAKE) -C ../lisp compile-first EMACS="$(bootstrap_exe)"

## Insert either autodeps.mk (if AUTO_DEPEND), else deps.mk.
@deps_frag@


### Makefile.in ends here

^ permalink raw reply	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-20  9:54 bug#18302: MSYS2 build issues Karol Ostrovsky
@ 2014-08-20 16:26 ` Eli Zaretskii
  2014-08-20 17:04   ` Glenn Morris
  2014-08-21 22:32 ` Angelo Graziosi
  1 sibling, 1 reply; 23+ messages in thread
From: Eli Zaretskii @ 2014-08-20 16:26 UTC (permalink / raw)
  To: Karol Ostrovsky; +Cc: chriszheng99, 18302

> Date: Wed, 20 Aug 2014 11:54:53 +0200
> From: Karol Ostrovsky <karol.ostrovsky@gmail.com>
> Cc: Chris Zheng <chriszheng99@gmail.com>
> 
> thanks to the work of Chris Zheng and Eli Zaretskii we can build Emacs
> on MSYS2 with MinGW-w64.  However, the process is not completely
> painless: xpm support needs manual tweaking of CFLAGS, configure
> script must be run with special flags, and make sometimes crashes for
> the "emacs$(EXEEXT)" target.

What do you mean by "make crashes"?  Can you show some messages or
other evidence of these crashes?

> I am submitting my proposed fixes for these three issues (based on the
> latest trunk version of Emacs).  With this fix I can successfully
> compile 64-bit Emacs using MSYS2 and MinGW-w64 with automatic xpm
> support, and the process follows the same easy steps as described in
> nt/INSTALL (just running ./autogen.sh, ./configure --prefix=..., and
> make).  I intend to submit some additional MSYS2+MinGW-w64
> documentation (file nt/INSTALL) should this patch be accepted.

Thanks.

First, I don't see your name on file with the FSF copyright
assignments.  Without that, we will be unable to accept substantial
contributions such as this one.  Would you be willing to sign the
necessary legal papers (assuming you are the sole author of these
changes)?

I have a few questions/comments about your suggested changes.  (In the
future, please always send diffs obtained by "bzr diff" or "diff -u",
not entire files.)

> -      *-mingw32 )
> -		opsys=mingw32
> +      *-mingw* )
> +		opsys=mingw

This change from "mingw32" to "mingw" causes a lot of changes all
over.  is it really necessary?  Is there a problem to call the system
"mingw32"?  It's just a value of a variable, with no other meaning.

Without changing "mingw32" to "mingw", the changes are small enough to
not require legal papers (but you might need them anyway further down
the road, if you intend to submit more patches).

> -if test "$opsys" = "mingw32"; then
> -  case "$canonical" in
> -    x86_64-*-mingw32) C_SWITCH_SYSTEM="-mtune=generic" ;;
> -    *) C_SWITCH_SYSTEM="-mtune=pentium4" ;;
> -  esac
> +if test "$opsys" = "mingw"; then
> +  C_SWITCH_SYSTEM="-mtune=generic"

Why do you want to change the -mtune switch for the 32-bit build?  It
is by default configured to Pentium 4 so that the resulting binary
could run on Windows 9X, which we still support.  Users that want to
produce binaries tuned to more modern CPUs for their own consumption
can always do that by asking for custom CFLAGS.

>  ### slightly different requirements wrt image libraries (it doesn't
>  ### use -lXpm because it loads the xpm shared library dynamically at
>  ### run time).
> -if test "${opsys}" = "mingw32"; then
> +if test "${opsys}" = "mingw"; then
>    if test "${with_xpm}" != "no"; then
> +    CPPFLAGS="$CPPFLAGS -I/mingw64/include/noX"
>      AC_CHECK_HEADER(X11/xpm.h, HAVE_XPM=yes, HAVE_XPM=no, [

Why do you need to add this switch to CPPFLAGS?  Why cannot the XPM
header files be installed in the default include tree?

> @@ -435,8 +435,7 @@
>  	else \
>  	  LC_ALL=C $(RUN_TEMACS) -batch -l loadup dump || exit 1; \
>  	  test "X$(PAXCTL)" = X || $(PAXCTL) -zex emacs$(EXEEXT); \
> -	  rm -f bootstrap-emacs$(EXEEXT); \
> -	  ln emacs$(EXEEXT) bootstrap-emacs$(EXEEXT); \
> +	  ln -vf emacs$(EXEEXT) bootstrap-emacs$(EXEEXT); \
>  	fi

This is a general (not MinGW-specific) part of src/Makefile.in, so I'm
not sure we should be changing it.  In particular, I'm not sure
non-GNU 'ln' supports these 2 switches (and why do you need -v
anyway?).

Also, I don't understand why this solves anything.  If "rm -f" fails,
presumably because bootstrap-emacs.exe is still running, so will, or
might, "ln -f".  And the failure is not fatal: just type "make" again,
and it runs to completion.

Thanks again for working on this.





^ permalink raw reply	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-20 16:26 ` Eli Zaretskii
@ 2014-08-20 17:04   ` Glenn Morris
  2014-08-20 17:20     ` Eli Zaretskii
  0 siblings, 1 reply; 23+ messages in thread
From: Glenn Morris @ 2014-08-20 17:04 UTC (permalink / raw)
  To: Eli Zaretskii; +Cc: Karol Ostrovsky, chriszheng99, 18302

Eli Zaretskii wrote:

> not sure we should be changing it.  In particular, I'm not sure
> non-GNU 'ln' supports these 2 switches (and why do you need -v
> anyway?).

http://www.gnu.org/savannah-checkouts/gnu/autoconf/manual/autoconf-2.69/html_node/Limitations-of-Usual-Tools.html

   "Don't rely on ln having a -f option."

This and other changes that you commented on give the strong impression
that this patch contains a bunch of things that are just personal
preferences.





^ permalink raw reply	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-20 17:04   ` Glenn Morris
@ 2014-08-20 17:20     ` Eli Zaretskii
  2014-08-21 10:08       ` Karol Ostrovsky
  0 siblings, 1 reply; 23+ messages in thread
From: Eli Zaretskii @ 2014-08-20 17:20 UTC (permalink / raw)
  To: Glenn Morris; +Cc: karol.ostrovsky, chriszheng99, 18302

> From: Glenn Morris <rgm@gnu.org>
> Cc: Karol Ostrovsky <karol.ostrovsky@gmail.com>,  chriszheng99@gmail.com,  18302@debbugs.gnu.org
> Date: Wed, 20 Aug 2014 13:04:44 -0400
> 
> Eli Zaretskii wrote:
> 
> > not sure we should be changing it.  In particular, I'm not sure
> > non-GNU 'ln' supports these 2 switches (and why do you need -v
> > anyway?).
> 
> http://www.gnu.org/savannah-checkouts/gnu/autoconf/manual/autoconf-2.69/html_node/Limitations-of-Usual-Tools.html
> 
>    "Don't rely on ln having a -f option."

Thanks, that's what I remembered.

> This and other changes that you commented on give the strong impression
> that this patch contains a bunch of things that are just personal
> preferences.

The only real issue AFAICT is the value that MSYS2's 'uname' returns,
that issue does need a (trivial) solution.





^ permalink raw reply	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-20 17:20     ` Eli Zaretskii
@ 2014-08-21 10:08       ` Karol Ostrovsky
  2014-08-21 14:30         ` Eli Zaretskii
  0 siblings, 1 reply; 23+ messages in thread
From: Karol Ostrovsky @ 2014-08-21 10:08 UTC (permalink / raw)
  To: Eli Zaretskii; +Cc: Chris Zheng, 18302

Hello all,

thank you for the very quick response.  First, I am sorry for some of
the mess, like submitting whole files.  Now to the technical stuff:

1. I am the sole author of these changes.  I have no issue with
signing the required legal papers.  Please, let me know how to proceed
with this.

2. MSYS2 'uname' is indeed the main source of the problem.  My
solution fixes that, and also renames opsys=mingw32 to opsys=mingw.
This renaming is not strictly necessary, but I believe it is a good
practice to name things as clearly as possible.  In this case, the
name mingw32 seems too related to a 32-bit system, which it is not any
more after my changes.

3. "-mtune" change: I don't see how Pentium4 optimisations are related
to running Windows9X.  I know people still running Windows95 on
Pentium III.  Shouldn't the official Emacs build be as generic as
possible?  Perhaps one should even take away the whole -mtune part for
MinGW.

4. CPPFLAGS for XPM change follows the same pattern as cygwin.  Both
cygwin and MSYS2 install the XPM library in an unusual place.  Since
adding an include path for cygwin was already accepted, I did not see
any issue with adding a similar solution for MSYS2.

5. I am sorry I was not aware of the ln flag issues.  The -v was only
to see the result and it is completely unnecessary, while the -f was
needed just as it was used for "rm -f" in the original.  The crash is
quite random, and currently I am unable to reproduce it.  Yesterday it
was relatively easy to reproduce, but today it is not happening.
However, I remember that make stopped with something like: unable to
build emacs.exe on line 603 of src/Makefile with reason "rm: cannot
remove ‘bootstrap-emacs.exe’: Device or resource busy".  The crash
happened even when running make without a j flag, that is non-parallel
build.

The easy manual workaround is to just start make again, but then it is
hard to add emacs to any automated build system (for example as an
MSYS2 package).

Given how random this crash is it is hard to justify any change to the
Makefile.in until I or someone else can find the root cause.

Best regards,

Karol

On 20 August 2014 19:20, Eli Zaretskii <eliz@gnu.org> wrote:
>> From: Glenn Morris <rgm@gnu.org>
>> Cc: Karol Ostrovsky <karol.ostrovsky@gmail.com>,  chriszheng99@gmail.com,  18302@debbugs.gnu.org
>> Date: Wed, 20 Aug 2014 13:04:44 -0400
>>
>> Eli Zaretskii wrote:
>>
>> > not sure we should be changing it.  In particular, I'm not sure
>> > non-GNU 'ln' supports these 2 switches (and why do you need -v
>> > anyway?).
>>
>> http://www.gnu.org/savannah-checkouts/gnu/autoconf/manual/autoconf-2.69/html_node/Limitations-of-Usual-Tools.html
>>
>>    "Don't rely on ln having a -f option."
>
> Thanks, that's what I remembered.
>
>> This and other changes that you commented on give the strong impression
>> that this patch contains a bunch of things that are just personal
>> preferences.
>
> The only real issue AFAICT is the value that MSYS2's 'uname' returns,
> that issue does need a (trivial) solution.





^ permalink raw reply	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-21 10:08       ` Karol Ostrovsky
@ 2014-08-21 14:30         ` Eli Zaretskii
  2014-08-21 16:00           ` Glenn Morris
  2014-08-21 18:38           ` Ken Brown
  0 siblings, 2 replies; 23+ messages in thread
From: Eli Zaretskii @ 2014-08-21 14:30 UTC (permalink / raw)
  To: Karol Ostrovsky; +Cc: chriszheng99, 18302

> Date: Thu, 21 Aug 2014 12:08:08 +0200
> From: Karol Ostrovsky <karol.ostrovsky@gmail.com>
> Cc: Glenn Morris <rgm@gnu.org>, Chris Zheng <chriszheng99@gmail.com>, 18302@debbugs.gnu.org
> 
> 1. I am the sole author of these changes.  I have no issue with
> signing the required legal papers.  Please, let me know how to proceed
> with this.

Glenn, could you please send him the papers?

> 2. MSYS2 'uname' is indeed the main source of the problem.  My
> solution fixes that, and also renames opsys=mingw32 to opsys=mingw.
> This renaming is not strictly necessary, but I believe it is a good
> practice to name things as clearly as possible.  In this case, the
> name mingw32 seems too related to a 32-bit system, which it is not any
> more after my changes.

I see no reason to change "mingw32" into something else.  It's just a
string, and doesn't imply anything about the bit-ness of the build.
In fact, users who build Emacs will never see this string.  Besides,
MinGW64 tools can also be used to build a 32-bit Emacs.

So let's leave that part alone.

> 3. "-mtune" change: I don't see how Pentium4 optimisations are related
> to running Windows9X.  I know people still running Windows95 on
> Pentium III.

"-mtune=pentium4" does not mean that Pentium III is not supported.  It
just means the code is tuned better for Pentium 4.

Without this switch, newer versions of GCC will use -mtune=native,
which is certainly bad news for users of much older CPUs.

> Shouldn't the official Emacs build be as generic as possible?

Hard to answer that without knowing what you mean by "generic" in this
context.

Again, users who want to build Emacs only for themselves can always
specify -mtune=native at configure time.

> Perhaps one should even take away the whole -mtune part for MinGW.

See above: it is there for a reason.

Note that the 64-build already uses -mtune=generic, because it is free
from the need to support Windows 9X.

> 4. CPPFLAGS for XPM change follows the same pattern as cygwin.  Both
> cygwin and MSYS2 install the XPM library in an unusual place.  Since
> adding an include path for cygwin was already accepted, I did not see
> any issue with adding a similar solution for MSYS2.

IMO, it is a mistake in the Cygwin case as well.  These issues should
be resolved in the compiler installation, not in packages.  If the
user installs xpm (or any other library) she should either install its
headers and library files in the standard places, or configure the
compiler to look in the non-standard places (e.g., by setting
C_INCLUDE_PATH in the environment).  Otherwise, your build environment
is not really 100% functional.

I'd urge the Cygwin Emacs maintainers to revert that special case, but
that's their call.  For native Windows builds, I certainly object to
introducing this deviation.

> 5. I am sorry I was not aware of the ln flag issues.  The -v was only
> to see the result and it is completely unnecessary, while the -f was
> needed just as it was used for "rm -f" in the original.  The crash is
> quite random, and currently I am unable to reproduce it.  Yesterday it
> was relatively easy to reproduce, but today it is not happening.
> However, I remember that make stopped with something like: unable to
> build emacs.exe on line 603 of src/Makefile with reason "rm: cannot
> remove ‘bootstrap-emacs.exe’: Device or resource busy".  The crash
> happened even when running make without a j flag, that is non-parallel
> build.
> 
> The easy manual workaround is to just start make again, but then it is
> hard to add emacs to any automated build system (for example as an
> MSYS2 package).
> 
> Given how random this crash is it is hard to justify any change to the
> Makefile.in until I or someone else can find the root cause.

I think the root cause is obvious: Windows won't let you delete the
executable file of a running program.  So small timing issues can open
a small window of opportunity for this failure.

How about adding a loop there that attempts to delete the file up to 5
times, say, each time sleeping for 1 second after a failure?  If that
works, it will always succeed on the 1st attempt on Posix hosts, so it
is harmless there.





^ permalink raw reply	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-21 14:30         ` Eli Zaretskii
@ 2014-08-21 16:00           ` Glenn Morris
  2014-08-21 18:38           ` Ken Brown
  1 sibling, 0 replies; 23+ messages in thread
From: Glenn Morris @ 2014-08-21 16:00 UTC (permalink / raw)
  To: Eli Zaretskii; +Cc: Karol Ostrovsky, chriszheng99, 18302

Eli Zaretskii wrote:

> Glenn, could you please send him the papers?

OK, sent off-list, but you (or anyone else) can do that just as easily
as I can. Just send the file /gd/gnuorg/Copyright/request-assign.future
from fencepost.

As explained at
https://www.gnu.org/prep/maintain/html_node/Copyright-Papers.html
the files are also available in gnulib.





^ permalink raw reply	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-21 14:30         ` Eli Zaretskii
  2014-08-21 16:00           ` Glenn Morris
@ 2014-08-21 18:38           ` Ken Brown
  2014-08-21 19:22             ` Eli Zaretskii
  1 sibling, 1 reply; 23+ messages in thread
From: Ken Brown @ 2014-08-21 18:38 UTC (permalink / raw)
  To: Eli Zaretskii, Karol Ostrovsky; +Cc: chriszheng99, 18302

On 8/21/2014 10:30 AM, Eli Zaretskii wrote:
>> 4. CPPFLAGS for XPM change follows the same pattern as cygwin.  Both
>> cygwin and MSYS2 install the XPM library in an unusual place.  Since
>> adding an include path for cygwin was already accepted, I did not see
>> any issue with adding a similar solution for MSYS2.
>
> IMO, it is a mistake in the Cygwin case as well.  These issues should
> be resolved in the compiler installation, not in packages.  If the
> user installs xpm (or any other library) she should either install its
> headers and library files in the standard places, or configure the
> compiler to look in the non-standard places (e.g., by setting
> C_INCLUDE_PATH in the environment).  Otherwise, your build environment
> is not really 100% functional.
>
> I'd urge the Cygwin Emacs maintainers to revert that special case, but
> that's their call.  For native Windows builds, I certainly object to
> introducing this deviation.

The Cygwin situation is not comparable.  The headers are installed in 
the standard places.  But Cygwin provides two versions of xpm.h, one in 
/usr/include/X11 and one in /usr/include/noX.  The Cygwin w32 build 
needs to add -I/usr/include/noX to CPPFLAGS (and -L/usr/lib/noX to 
LDFLAGS) in order to pick up the correct version.

Ken





^ permalink raw reply	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-21 18:38           ` Ken Brown
@ 2014-08-21 19:22             ` Eli Zaretskii
  2014-08-21 19:33               ` Eli Zaretskii
  2014-08-21 21:29               ` Ken Brown
  0 siblings, 2 replies; 23+ messages in thread
From: Eli Zaretskii @ 2014-08-21 19:22 UTC (permalink / raw)
  To: Ken Brown; +Cc: karol.ostrovsky, chriszheng99, 18302

> Date: Thu, 21 Aug 2014 14:38:13 -0400
> From: Ken Brown <kbrown@cornell.edu>
> CC: chriszheng99@gmail.com, 18302@debbugs.gnu.org
> 
> > I'd urge the Cygwin Emacs maintainers to revert that special case, but
> > that's their call.  For native Windows builds, I certainly object to
> > introducing this deviation.
> 
> The Cygwin situation is not comparable.  The headers are installed in 
> the standard places.  But Cygwin provides two versions of xpm.h, one in 
> /usr/include/X11 and one in /usr/include/noX.  The Cygwin w32 build 
> needs to add -I/usr/include/noX to CPPFLAGS (and -L/usr/lib/noX to 
> LDFLAGS) in order to pick up the correct version.

No, the solution is to use

  #if defined __CYGWIN__ && !defined HAVE_X_WINDOWS
  #include <noX/xpm.h>
  #else
  #include <xpm.h>
  #endif

The way we work around the problem now will break if someone installs
the standard header files in a place other than /usr/include.

And if you disagree, then at least please put the above explanation in
configure.ac, so that we won't need to have this discussion a year
from now.





^ permalink raw reply	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-21 19:22             ` Eli Zaretskii
@ 2014-08-21 19:33               ` Eli Zaretskii
  2014-08-21 21:29               ` Ken Brown
  1 sibling, 0 replies; 23+ messages in thread
From: Eli Zaretskii @ 2014-08-21 19:33 UTC (permalink / raw)
  To: kbrown; +Cc: karol.ostrovsky, chriszheng99, 18302

> Date: Thu, 21 Aug 2014 22:22:36 +0300
> From: Eli Zaretskii <eliz@gnu.org>
> Cc: karol.ostrovsky@gmail.com, chriszheng99@gmail.com, 18302@debbugs.gnu.org
> 
>   #if defined __CYGWIN__ && !defined HAVE_X_WINDOWS
>   #include <noX/xpm.h>
>   #else
>   #include <xpm.h>
>   #endif

Sorry, I meant

  #if defined __CYGWIN__ && !defined HAVE_X_WINDOWS
  #include <noX/xpm.h>
  #else
  #include <X11/xpm.h>
  #endif





^ permalink raw reply	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-21 19:22             ` Eli Zaretskii
  2014-08-21 19:33               ` Eli Zaretskii
@ 2014-08-21 21:29               ` Ken Brown
  2014-08-22  6:10                 ` Eli Zaretskii
  1 sibling, 1 reply; 23+ messages in thread
From: Ken Brown @ 2014-08-21 21:29 UTC (permalink / raw)
  To: Eli Zaretskii; +Cc: karol.ostrovsky, chriszheng99, 18302

On 8/21/2014 3:22 PM, Eli Zaretskii wrote:
>> Date: Thu, 21 Aug 2014 14:38:13 -0400
>> From: Ken Brown <kbrown@cornell.edu>
>> CC: chriszheng99@gmail.com, 18302@debbugs.gnu.org
>>
>>> I'd urge the Cygwin Emacs maintainers to revert that special case, but
>>> that's their call.  For native Windows builds, I certainly object to
>>> introducing this deviation.
>>
>> The Cygwin situation is not comparable.  The headers are installed in
>> the standard places.  But Cygwin provides two versions of xpm.h, one in
>> /usr/include/X11 and one in /usr/include/noX.  The Cygwin w32 build
>> needs to add -I/usr/include/noX to CPPFLAGS (and -L/usr/lib/noX to
>> LDFLAGS) in order to pick up the correct version.
>
> No, the solution is to use
>
>    #if defined __CYGWIN__ && !defined HAVE_X_WINDOWS
>    #include <noX/xpm.h>
>    #else
>    #include <xpm.h>
>    #endif

I neglected to say that xpm.h in /usr/include/noX is actually a symlink 
to /usr/include/noX/X11/xpm.h.  The code that includes xpm.h (in 
image.c) is '#include "X11/xpm.h"' on all platforms.  For the native 
Windows build and the Cygwin w32 build, this is done conditionally on 
NTGUI, after first defining some macros.  In order for "X11/xpm.h" to 
produce the correct file, the include path has to be set up correctly. 
I really don't want to rewrite all this for no good reason.

> The way we work around the problem now will break if someone installs
> the standard header files in a place other than /usr/include.

In the Cygwin case, I'm not sure what you mean by "someone".  The 
headers are provided by Cygwin packages, and package maintainers are 
supposed to know where to put header files.  In this case the package is 
libXpm-noX-devel.  I can't think of any reason why a future maintainer 
would change the location of the headers; but if that happens, then 
emacs will have to adapt.

> And if you disagree, then at least please put the above explanation in
> configure.ac, so that we won't need to have this discussion a year
> from now.

I don't necessarily disagree; it's just that I don't feel like fixing 
something that isn't broken.  If the relevant code in image.c has to be 
rewritten at some point anyway, we could rethink how to best handle 
xpm.h, but for now I prefer to leave it alone.  I'll add a comment to 
configure.ac on the trunk.

Ken





^ permalink raw reply	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-20  9:54 bug#18302: MSYS2 build issues Karol Ostrovsky
  2014-08-20 16:26 ` Eli Zaretskii
@ 2014-08-21 22:32 ` Angelo Graziosi
  2014-08-22  6:30   ` Eli Zaretskii
  1 sibling, 1 reply; 23+ messages in thread
From: Angelo Graziosi @ 2014-08-21 22:32 UTC (permalink / raw)
  To: 18302

Just a few comments..

I do MSYS2-MinGW64 Emacs trunk builds with the simple steps:

./autogen.sh

./configure --prefix=/Emacs.app --with-wide-int 
--build=x86_64-w64-mingw32 --without-imagemagick 
'CFLAGS=-I/mingw64/include/noX -Ofast -g0 -pipe' LDFLAGS=-pipe

make...


The build needs the

   CFLAGS=-I/mingw64/include/noX

definition because of the manner how MSYS2 work. It puts all the stuffs 
depending on msys2*dll (the equivalent of cygwin1.dll) under /usr. 
Instead the MinGW34 and MinGW64 applications are under /mingw32 and 
/mingw64 respectively. Usually, to work with MinGW64 applications, one 
needs to start the shell-console with mingw64_shell.bat batch file 
(msys2_shell.bat or mingw32_shell.bat to work with MSYS2 or MinGW32 apps).

So, it is in the "nature" of MSYS2 that it puts things in non-standard 
directory for MinGW32/64 apps. Probably one can change Emacs configure 
to avoid these issue but I wonder, given the simple workaround shown 
above, if this is worth the effort.

Instead, it would interesting, to understand why removing the configure 
option, "--without-imagemagick", with the MinGW64 ImageMagick package 
installed, configure enables imagemagick support but the build fails 
with a linker error.. but this is matter for another thread.. I think.

Ken Brown wrote:
> it's just that I don't feel like fixing something that isn't broken.

I concord. Emacs has other kind of problems on Cygwin [*] (see recent 
threads on the Cygwin list). Breaking what is working would compromise 
an already fragile situation.

Ciao,
Angelo.

---
[*] On Cygwin, usually I use as configure:

./configure --prefix=/usr/local/Emacs.app --with-w32 
--build=x86_64-pc-cygwin --with-wide-int 'CFLAGS=-Ofast -g0 -pipe' 
LDFLAGS=-pipe CC=clang

which is very similar to that I use on MSYS2..





^ permalink raw reply	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-21 21:29               ` Ken Brown
@ 2014-08-22  6:10                 ` Eli Zaretskii
  2014-08-22 13:04                   ` Ken Brown
  0 siblings, 1 reply; 23+ messages in thread
From: Eli Zaretskii @ 2014-08-22  6:10 UTC (permalink / raw)
  To: Ken Brown; +Cc: karol.ostrovsky, chriszheng99, 18302

> Date: Thu, 21 Aug 2014 17:29:51 -0400
> From: Ken Brown <kbrown@cornell.edu>
> CC: karol.ostrovsky@gmail.com, chriszheng99@gmail.com, 18302@debbugs.gnu.org
> 
> >    #if defined __CYGWIN__ && !defined HAVE_X_WINDOWS
> >    #include <noX/xpm.h>
> >    #else
> >    #include <X11/xpm.h>
> >    #endif
> 
> I neglected to say that xpm.h in /usr/include/noX is actually a symlink 
> to /usr/include/noX/X11/xpm.h.

I don't see how this changes anything.  You could use

  #include <noX/X11/xpm.h>

or you could remain with <noX/xpm.h>, they both will work.

> The code that includes xpm.h (in 
> image.c) is '#include "X11/xpm.h"' on all platforms.  For the native 
> Windows build and the Cygwin w32 build, this is done conditionally on 
> NTGUI, after first defining some macros.  In order for "X11/xpm.h" to 
> produce the correct file, the include path has to be set up correctly. 

That just means we need to re-arrange the #ifdef's a bit differently.
Clearly, not rocket science.

> I really don't want to rewrite all this for no good reason.

As I said, this is your call.  My point is that adding
system-dependent -I switches in configure is not the only way, and IMO
not the best one.

> > The way we work around the problem now will break if someone installs
> > the standard header files in a place other than /usr/include.
> 
> In the Cygwin case, I'm not sure what you mean by "someone".

The end-user, of course.  Posix platforms don't limit end-users in
where they install their header files, and GCC supports that.

> I'll add a comment to configure.ac on the trunk.

Thanks, but why not on the release branch?  A comment cannot possibly
do any harm.





^ permalink raw reply	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-21 22:32 ` Angelo Graziosi
@ 2014-08-22  6:30   ` Eli Zaretskii
  2014-08-22 10:55     ` Angelo Graziosi
  0 siblings, 1 reply; 23+ messages in thread
From: Eli Zaretskii @ 2014-08-22  6:30 UTC (permalink / raw)
  To: Angelo Graziosi; +Cc: 18302

> Date: Fri, 22 Aug 2014 00:32:41 +0200
> From: Angelo Graziosi <angelo.graziosi@alice.it>
> 
> I do MSYS2-MinGW64 Emacs trunk builds with the simple steps:
> 
> ./autogen.sh
> 
> ./configure --prefix=/Emacs.app --with-wide-int 
> --build=x86_64-w64-mingw32 --without-imagemagick 
> 'CFLAGS=-I/mingw64/include/noX -Ofast -g0 -pipe' LDFLAGS=-pipe
> 
> make...
> 
> 
> The build needs the
> 
>    CFLAGS=-I/mingw64/include/noX
> 
> definition because of the manner how MSYS2 work. It puts all the stuffs 
> depending on msys2*dll (the equivalent of cygwin1.dll) under /usr. 
> Instead the MinGW34 and MinGW64 applications are under /mingw32 and 
> /mingw64 respectively. Usually, to work with MinGW64 applications, one 
> needs to start the shell-console with mingw64_shell.bat batch file 
> (msys2_shell.bat or mingw32_shell.bat to work with MSYS2 or MinGW32 apps).

Sorry, I don't understand what does this have to do with the issue at
hand.  You are talking about how MSYS2 maps the Posix-like /mingw32
and /mingw64 trees into Windows filesystems.  Fine; but why does this
matter in the context of this discussion?  ISTM that if you want to be
able to produce both MinGW32 and MinGW64 programs on the same machine,
you need 2 separate hierarchies anyway, one for the 32-bit and the
other for 64-bit programs.  IOW, just copy the /usr/include tree into
each of the mingwXX parents, and each respective compiler will find
them automatically, because it always searches for ../include relative
to its binary (you can see that with "gcc -v").  If that doesn't work,
then set C_INCLUDE_PATH in the environment to point to the right
include directory in each case.

Without having this set up correctly, your development environment is
subtly broken.

And if MSYS2 somehow makes this hard or impossible, then it's an MSYS2
bug that should be fixed ASAP.

> So, it is in the "nature" of MSYS2 that it puts things in non-standard 
> directory for MinGW32/64 apps. Probably one can change Emacs configure 
> to avoid these issue but I wonder, given the simple workaround shown 
> above, if this is worth the effort.

As I explained in this discussion, this has nothing to do with Emacs.

No, this is a basic compiler configuration issue: the headers should
be in a place where the compiler can find them, period.  No additional
"-I" switches should be needed to allow the compiler to find the
headers (and the library files) of an installed library/package.

> Instead, it would interesting, to understand why removing the configure 
> option, "--without-imagemagick", with the MinGW64 ImageMagick package 
> installed, configure enables imagemagick support but the build fails 
> with a linker error.. but this is matter for another thread.. I think.

The Windows build currently doesn't support ImageMagick.  That's why
you see those failures.  Patches are welcome to add ImageMagick
support in the same way we support other image libraries on Windows:
i.e. via dynamic load at run time if the library exists and when it is
first used.  See image.c for the details.





^ permalink raw reply	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-22  6:30   ` Eli Zaretskii
@ 2014-08-22 10:55     ` Angelo Graziosi
  2014-08-22 13:25       ` Eli Zaretskii
  0 siblings, 1 reply; 23+ messages in thread
From: Angelo Graziosi @ 2014-08-22 10:55 UTC (permalink / raw)
  To: Eli Zaretskii; +Cc: 18302



Il 22/08/2014 08:30, Eli Zaretskii ha scritto:

> Sorry, I don't understand what does this have to do with the issue at
> hand.

Sorry for the noise then.. I have tried to explain (unsuccessfully) why 
MSYS2 doesn't put XPM things in standard directory.. probably I 
misinterpreted the thread..

  Angelo





^ permalink raw reply	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-22  6:10                 ` Eli Zaretskii
@ 2014-08-22 13:04                   ` Ken Brown
  2014-08-22 13:33                     ` Eli Zaretskii
  0 siblings, 1 reply; 23+ messages in thread
From: Ken Brown @ 2014-08-22 13:04 UTC (permalink / raw)
  To: Eli Zaretskii; +Cc: karol.ostrovsky, chriszheng99, 18302

On 8/22/2014 2:10 AM, Eli Zaretskii wrote:
> Thanks, but why not on the release branch?  A comment cannot possibly
> do any harm.

Done, as revision 117454.





^ permalink raw reply	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-22 10:55     ` Angelo Graziosi
@ 2014-08-22 13:25       ` Eli Zaretskii
  0 siblings, 0 replies; 23+ messages in thread
From: Eli Zaretskii @ 2014-08-22 13:25 UTC (permalink / raw)
  To: Angelo Graziosi; +Cc: 18302

> Date: Fri, 22 Aug 2014 12:55:53 +0200
> From: Angelo Graziosi <angelo.graziosi@alice.it>
> CC: 18302@debbugs.gnu.org
> 
> > Sorry, I don't understand what does this have to do with the issue at
> > hand.
> 
> Sorry for the noise then.. I have tried to explain (unsuccessfully) why 
> MSYS2 doesn't put XPM things in standard directory..

MSYS2 cannot put anything anywhere, it can only map some /foo
directories to certain Windows directories.  But those MSYS2 mappings
do not and cannot change the places where the compiler looks for its
headers.

The user who installs XPM is the one who decides where its headers
will be.  MSYS2 cannot possibly change that.





^ permalink raw reply	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-22 13:04                   ` Ken Brown
@ 2014-08-22 13:33                     ` Eli Zaretskii
  2014-08-22 14:18                       ` Karol Ostrovsky
  0 siblings, 1 reply; 23+ messages in thread
From: Eli Zaretskii @ 2014-08-22 13:33 UTC (permalink / raw)
  To: Ken Brown; +Cc: karol.ostrovsky, chriszheng99, 18302

> Date: Fri, 22 Aug 2014 09:04:35 -0400
> From: Ken Brown <kbrown@cornell.edu>
> CC: karol.ostrovsky@gmail.com, chriszheng99@gmail.com, 18302@debbugs.gnu.org
> 
> On 8/22/2014 2:10 AM, Eli Zaretskii wrote:
> > Thanks, but why not on the release branch?  A comment cannot possibly
> > do any harm.
> 
> Done, as revision 117454.

Thank you.





^ permalink raw reply	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-22 13:33                     ` Eli Zaretskii
@ 2014-08-22 14:18                       ` Karol Ostrovsky
  2014-08-23  8:57                         ` Eli Zaretskii
  0 siblings, 1 reply; 23+ messages in thread
From: Karol Ostrovsky @ 2014-08-22 14:18 UTC (permalink / raw)
  To: Eli Zaretskii; +Cc: Chris Zheng, 18302

[-- Attachment #1: Type: text/plain, Size: 1248 bytes --]

Hello all,

I will try to summarise the situation, and I am attaching my updated
solution proposal for this particular bug:

1. MSYS2 uname must be handled properly, and that is fixed in the new
proposed patch.  I disagree with not renaming opsys from mingw32 to
mingw, since mingw32 string is used in other places in the same file
and it means something else there, which I find possibly confusing.
But this change is not in my new patch.

2. -mtune is back to what it was with a minimal change required for
MSYS2+MinGW-w64 uname handling.

3. Include path for xpm in MSYS2+MinGW-w64 is handled in the same way
as in Cygwin.  Perhaps, the same type of comment as was added for
Cygwin should be added for MSYS2+MinGW-w64.

4. A loop is added in the recipe for emacs.exe to handle
bootstrap-emacs.exe busy problem.

Best regards,

Karol

On 22 August 2014 15:33, Eli Zaretskii <eliz@gnu.org> wrote:
>> Date: Fri, 22 Aug 2014 09:04:35 -0400
>> From: Ken Brown <kbrown@cornell.edu>
>> CC: karol.ostrovsky@gmail.com, chriszheng99@gmail.com, 18302@debbugs.gnu.org
>>
>> On 8/22/2014 2:10 AM, Eli Zaretskii wrote:
>> > Thanks, but why not on the release branch?  A comment cannot possibly
>> > do any harm.
>>
>> Done, as revision 117454.
>
> Thank you.

[-- Attachment #2: configure.ac.diff --]
[-- Type: text/plain, Size: 1456 bytes --]

diff --git a/configure.ac b/configure.ac
index 3e49527..c350673 100644
--- a/configure.ac
+++ b/configure.ac
@@ -650,7 +650,7 @@ case "${canonical}" in
   i[3456]86-*-* )
     case "${canonical}" in
       *-darwin* )               opsys=darwin ;;
-      *-mingw32 )
+      *-mingw* )
 		opsys=mingw32
 		# MinGW overrides and adds some system headers in nt/inc.
 		GCC_TEST_OPTIONS="-I $srcdir/nt/inc"
@@ -665,7 +665,7 @@ case "${canonical}" in
   # MinGW64
   x86_64-*-* )
     case "${canonical}" in
-      *-mingw32 )
+      *-mingw* )
 		opsys=mingw32
 		# MinGW overrides and adds some system headers in nt/inc.
 		GCC_TEST_OPTIONS="-I $srcdir/nt/inc"
@@ -1323,7 +1323,7 @@ test "$opsys" = "aix4.2" && test "x$GCC" != "xyes" && \
   C_SWITCH_SYSTEM="-ma -qmaxmem=4000"
 if test "$opsys" = "mingw32"; then
   case "$canonical" in
-    x86_64-*-mingw32) C_SWITCH_SYSTEM="-mtune=generic" ;;
+    x86_64-*-mingw*) C_SWITCH_SYSTEM="-mtune=generic" ;;
     *) C_SWITCH_SYSTEM="-mtune=pentium4" ;;
   esac
 fi
@@ -3066,11 +3066,13 @@ fi
 ### run time).
 if test "${opsys}" = "mingw32"; then
   if test "${with_xpm}" != "no"; then
+    CPPFLAGS="$CPPFLAGS -I/mingw64/include/noX"
     AC_CHECK_HEADER(X11/xpm.h, HAVE_XPM=yes, HAVE_XPM=no, [
 #define FOR_MSW 1])
   fi
 
   if test "${HAVE_XPM}" = "yes"; then
+    REAL_CPPFLAGS="$REAL_CPPFLAGS -I/mingw64/include/noX"
     AC_DEFINE(HAVE_XPM, 1, [Define to 1 if you have the Xpm library (-lXpm).])
   fi
 fi

[-- Attachment #3: Makefile.in.diff --]
[-- Type: text/plain, Size: 502 bytes --]

diff --git a/src/Makefile.in b/src/Makefile.in
index 0dc4886..3f1192f 100644
--- a/src/Makefile.in
+++ b/src/Makefile.in
@@ -435,6 +435,8 @@ emacs$(EXEEXT): temacs$(EXEEXT) \
 	else \
 	  LC_ALL=C $(RUN_TEMACS) -batch -l loadup dump || exit 1; \
 	  test "X$(PAXCTL)" = X || $(PAXCTL) -zex emacs$(EXEEXT); \
-	  rm -f bootstrap-emacs$(EXEEXT); \
+	  while test -f bootstrap-emacs$(EXEEXT); do \
+	    rm -f bootstrap-emacs$(EXEEXT); \
+	  done; \
 	  ln emacs$(EXEEXT) bootstrap-emacs$(EXEEXT); \
 	fi

^ permalink raw reply related	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-22 14:18                       ` Karol Ostrovsky
@ 2014-08-23  8:57                         ` Eli Zaretskii
  2014-08-25  8:18                           ` Karol Ostrovsky
  2017-11-29  1:46                           ` Noam Postavsky
  0 siblings, 2 replies; 23+ messages in thread
From: Eli Zaretskii @ 2014-08-23  8:57 UTC (permalink / raw)
  To: Karol Ostrovsky; +Cc: chriszheng99, 18302

> Date: Fri, 22 Aug 2014 16:18:11 +0200
> From: Karol Ostrovsky <karol.ostrovsky@gmail.com>
> Cc: Ken Brown <kbrown@cornell.edu>, Chris Zheng <chriszheng99@gmail.com>, 18302@debbugs.gnu.org
> 
> I will try to summarise the situation, and I am attaching my updated
> solution proposal for this particular bug:
> 
> 1. MSYS2 uname must be handled properly, and that is fixed in the new
> proposed patch.  I disagree with not renaming opsys from mingw32 to
> mingw, since mingw32 string is used in other places in the same file
> and it means something else there, which I find possibly confusing.
> But this change is not in my new patch.
> 
> 2. -mtune is back to what it was with a minimal change required for
> MSYS2+MinGW-w64 uname handling.
> 
> 3. Include path for xpm in MSYS2+MinGW-w64 is handled in the same way
> as in Cygwin.  Perhaps, the same type of comment as was added for
> Cygwin should be added for MSYS2+MinGW-w64.
> 
> 4. A loop is added in the recipe for emacs.exe to handle
> bootstrap-emacs.exe busy problem.

Thanks.  I installed items 1, 2, and 4, but not item 3.

If you think we should do something about the xpm.h header, then
please try this alternative solution: copy the xpm.h header file into
the X11 subdirectory of your GCC 'include' directory (the one where
you have all the standard C header files), then try configuring and
building Emacs without adding the "-I/mingw64/include/noX" switch to
CPPFLAGS.  If that doesn't work, please show the error messages you
get from the compiler, and let's take it from there.

If, for some reason, you think that copying xpm.h to include/X11/xpm.h
is not appropriate, please explain why you think so.





^ permalink raw reply	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-23  8:57                         ` Eli Zaretskii
@ 2014-08-25  8:18                           ` Karol Ostrovsky
  2014-08-25 14:56                             ` Eli Zaretskii
  2017-11-29  1:46                           ` Noam Postavsky
  1 sibling, 1 reply; 23+ messages in thread
From: Karol Ostrovsky @ 2014-08-25  8:18 UTC (permalink / raw)
  To: Eli Zaretskii; +Cc: Chris Zheng, 18302

Hello Eli,

thank you for the help.  As for the item 3: as far as I understand the
situation with xpm in MinGW-w64 is the same as in Cygwin.  There are
two packages providing xpm, and it is the package that is installed in
the non-standard place that must be used for Emacs native Windows
build.  Thus, I don't see why the same solution that was approved for
Cygwin cannot be used for MinGW-w64.

Best regards,

Karol

On 23 August 2014 10:57, Eli Zaretskii <eliz@gnu.org> wrote:
>> Date: Fri, 22 Aug 2014 16:18:11 +0200
>> From: Karol Ostrovsky <karol.ostrovsky@gmail.com>
>> Cc: Ken Brown <kbrown@cornell.edu>, Chris Zheng <chriszheng99@gmail.com>, 18302@debbugs.gnu.org
>>
>> I will try to summarise the situation, and I am attaching my updated
>> solution proposal for this particular bug:
>>
>> 1. MSYS2 uname must be handled properly, and that is fixed in the new
>> proposed patch.  I disagree with not renaming opsys from mingw32 to
>> mingw, since mingw32 string is used in other places in the same file
>> and it means something else there, which I find possibly confusing.
>> But this change is not in my new patch.
>>
>> 2. -mtune is back to what it was with a minimal change required for
>> MSYS2+MinGW-w64 uname handling.
>>
>> 3. Include path for xpm in MSYS2+MinGW-w64 is handled in the same way
>> as in Cygwin.  Perhaps, the same type of comment as was added for
>> Cygwin should be added for MSYS2+MinGW-w64.
>>
>> 4. A loop is added in the recipe for emacs.exe to handle
>> bootstrap-emacs.exe busy problem.
>
> Thanks.  I installed items 1, 2, and 4, but not item 3.
>
> If you think we should do something about the xpm.h header, then
> please try this alternative solution: copy the xpm.h header file into
> the X11 subdirectory of your GCC 'include' directory (the one where
> you have all the standard C header files), then try configuring and
> building Emacs without adding the "-I/mingw64/include/noX" switch to
> CPPFLAGS.  If that doesn't work, please show the error messages you
> get from the compiler, and let's take it from there.
>
> If, for some reason, you think that copying xpm.h to include/X11/xpm.h
> is not appropriate, please explain why you think so.





^ permalink raw reply	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-25  8:18                           ` Karol Ostrovsky
@ 2014-08-25 14:56                             ` Eli Zaretskii
  0 siblings, 0 replies; 23+ messages in thread
From: Eli Zaretskii @ 2014-08-25 14:56 UTC (permalink / raw)
  To: Karol Ostrovsky; +Cc: chriszheng99, 18302

> Date: Mon, 25 Aug 2014 10:18:20 +0200
> From: Karol Ostrovsky <karol.ostrovsky@gmail.com>
> Cc: Ken Brown <kbrown@cornell.edu>, Chris Zheng <chriszheng99@gmail.com>, 18302@debbugs.gnu.org
> 
> As for the item 3: as far as I understand the
> situation with xpm in MinGW-w64 is the same as in Cygwin.  There are
> two packages providing xpm, and it is the package that is installed in
> the non-standard place that must be used for Emacs native Windows
> build.  Thus, I don't see why the same solution that was approved for
> Cygwin cannot be used for MinGW-w64.

I already said that IMO Cygwin should not add any switches, either.

In any case, the situation with MinGW-w64 is not the same as with
Cygwin: Cygwin has a version of xpm.h that is used with the X GUI and
another one that is used with the w32 GUI.  By contrast, MinGW-w64
doesn't support X, so it doesn't need to have 2 different headers by
the same name in the same include tree.

Did you try the alternative solution I suggested?  If not, please do:
I'm quite sure that it will work, and free you from the need to add
custom -I switches.





^ permalink raw reply	[flat|nested] 23+ messages in thread

* bug#18302: MSYS2 build issues
  2014-08-23  8:57                         ` Eli Zaretskii
  2014-08-25  8:18                           ` Karol Ostrovsky
@ 2017-11-29  1:46                           ` Noam Postavsky
  1 sibling, 0 replies; 23+ messages in thread
From: Noam Postavsky @ 2017-11-29  1:46 UTC (permalink / raw)
  To: Eli Zaretskii; +Cc: Karol Ostrovsky, chriszheng99, 18302

close 18302 
quit

Eli Zaretskii <eliz@gnu.org> writes:

>> Date: Fri, 22 Aug 2014 16:18:11 +0200
>> From: Karol Ostrovsky <karol.ostrovsky@gmail.com>
>> Cc: Ken Brown <kbrown@cornell.edu>, Chris Zheng <chriszheng99@gmail.com>, 18302@debbugs.gnu.org
>> 
>> I will try to summarise the situation, and I am attaching my updated
>> solution proposal for this particular bug:
>> 
>> 1. MSYS2 uname must be handled properly, and that is fixed in the new
>> proposed patch.  I disagree with not renaming opsys from mingw32 to
>> mingw, since mingw32 string is used in other places in the same file
>> and it means something else there, which I find possibly confusing.
>> But this change is not in my new patch.
>> 
>> 2. -mtune is back to what it was with a minimal change required for
>> MSYS2+MinGW-w64 uname handling.
>> 
>> 3. Include path for xpm in MSYS2+MinGW-w64 is handled in the same way
>> as in Cygwin.  Perhaps, the same type of comment as was added for
>> Cygwin should be added for MSYS2+MinGW-w64.
>> 
>> 4. A loop is added in the recipe for emacs.exe to handle
>> bootstrap-emacs.exe busy problem.
>
> Thanks.  I installed items 1, 2, and 4, but not item 3.

As far as I can tell, there is nothing more to do here.





^ permalink raw reply	[flat|nested] 23+ messages in thread

end of thread, other threads:[~2017-11-29  1:46 UTC | newest]

Thread overview: 23+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-08-20  9:54 bug#18302: MSYS2 build issues Karol Ostrovsky
2014-08-20 16:26 ` Eli Zaretskii
2014-08-20 17:04   ` Glenn Morris
2014-08-20 17:20     ` Eli Zaretskii
2014-08-21 10:08       ` Karol Ostrovsky
2014-08-21 14:30         ` Eli Zaretskii
2014-08-21 16:00           ` Glenn Morris
2014-08-21 18:38           ` Ken Brown
2014-08-21 19:22             ` Eli Zaretskii
2014-08-21 19:33               ` Eli Zaretskii
2014-08-21 21:29               ` Ken Brown
2014-08-22  6:10                 ` Eli Zaretskii
2014-08-22 13:04                   ` Ken Brown
2014-08-22 13:33                     ` Eli Zaretskii
2014-08-22 14:18                       ` Karol Ostrovsky
2014-08-23  8:57                         ` Eli Zaretskii
2014-08-25  8:18                           ` Karol Ostrovsky
2014-08-25 14:56                             ` Eli Zaretskii
2017-11-29  1:46                           ` Noam Postavsky
2014-08-21 22:32 ` Angelo Graziosi
2014-08-22  6:30   ` Eli Zaretskii
2014-08-22 10:55     ` Angelo Graziosi
2014-08-22 13:25       ` Eli Zaretskii

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).