* bug#3237: Bug report, going back to 22.1 @ 2009-05-07 17:14 ` A. Jan Kutylowski 2009-05-25 15:18 ` Jason Rumney 2009-06-21 3:50 ` bug#3237: marked as done (Bug report, going back to 22.1) Emacs bug Tracking System 0 siblings, 2 replies; 4+ messages in thread From: A. Jan Kutylowski @ 2009-05-07 17:14 UTC (permalink / raw) To: bug-gnu-emacs From: <andrzejk@SV-STUD-0-93> To: bug-gnu-emacs@gnu.org Subject: keyboard --text follows this line-- Please write in English if possible, because the Emacs maintainers usually do not have translators to read other languages for them. Your bug report will be posted to the bug-gnu-emacs@gnu.org mailing list, and to the gnu.emacs.bug news group. Please describe exactly what actions triggered the bug and the precise symptoms of the bug: +++ After Emacs 22.1 Emacs does not recognize a change in the keyboard setup under Windows XP. I have been using Emacs since version 20.3 to write in Polish after declaring the Polish language for the keyboard and after declaring cp1250-dos for the kayboard (and appropriately for the buffer involved). Polish "letters" are obtained using AltGr +key, or AltGr+Shift (right) +key. In particular, Emacs 22.3 has that bug, although retrospective testing showed that 22.1 reacts properly. This is a considerable impediment. I am looking forward to your help +++++ If Emacs crashed, and you have the Emacs process in the gdb debugger, please include the output from the following gdb commands: `bt full' and `xbacktrace'. If you would like to further debug the crash, please read the file m:/PClib/Emacs22.3/etc/DEBUG for instructions. In GNU Emacs 22.3.1 (i386-mingw-nt5.1.2600) of 2008-09-06 on SOFT-MJASON Windowing system distributor `Microsoft Corp.', version 5.1.2600 configured using `configure --with-gcc (3.4)' Important settings: value of $LC_ALL: nil value of $LC_COLLATE: nil value of $LC_CTYPE: nil value of $LC_MESSAGES: nil value of $LC_MONETARY: nil value of $LC_NUMERIC: nil value of $LC_TIME: nil value of $LANG: NOR locale-coding-system: cp1252 default-enable-multibyte-characters: t Major mode: Fundamental Minor modes in effect: display-time-mode: t iswitchb-mode: t shell-dirtrack-mode: t show-paren-mode: t delete-selection-mode: t encoded-kbd-mode: t tooltip-mode: t tool-bar-mode: t mouse-wheel-mode: t menu-bar-mode: t file-name-shadow-mode: t global-font-lock-mode: t unify-8859-on-encoding-mode: t utf-translate-cjk-mode: t auto-compression-mode: t column-number-mode: t line-number-mode: t transient-mark-mode: t Recent input: <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <menu-bar> <help-menu> <send-emacs-bug-report> Recent messages: Loading iswitchb...done Loading time...done Loading advice...done Loading bytecomp...done Loading paren...done Loading m:/PClib/Emacs22.3/site-lisp/header/header.el (source)...done Loading desktop...done No desktop file. For information about GNU Emacs and the GNU system, type C-h C-a. Loading emacsbug...done ^ permalink raw reply [flat|nested] 4+ messages in thread
* bug#3237: Bug report, going back to 22.1 2009-05-07 17:14 ` bug#3237: Bug report, going back to 22.1 A. Jan Kutylowski @ 2009-05-25 15:18 ` Jason Rumney 2009-06-21 3:50 ` bug#3237: marked as done (Bug report, going back to 22.1) Emacs bug Tracking System 1 sibling, 0 replies; 4+ messages in thread From: Jason Rumney @ 2009-05-25 15:18 UTC (permalink / raw) To: A. Jan Kutylowski, 3237 A. Jan Kutylowski wrote: > After Emacs 22.1 Emacs does not recognize a change in the keyboard > setup under Windows XP. I have been using Emacs since version 20.3 to > write in Polish after declaring the Polish language for the keyboard > and after declaring cp1250-dos for the kayboard (and appropriately for > the buffer involved). Polish "letters" are > obtained using AltGr +key, or AltGr+Shift (right) +key. In particular, > Emacs 22.3 has that bug, although retrospective testing showed that 22.1 > reacts properly. Can you try the 23.0.94 pretest at http://alpha.gnu.org/gnu/emacs/pretest/windows/ Some of low level input handling on Windows has changed since 22.3, so it is possible that your problem is already fixed. ^ permalink raw reply [flat|nested] 4+ messages in thread
* bug#3237: marked as done (Bug report, going back to 22.1) 2009-05-07 17:14 ` bug#3237: Bug report, going back to 22.1 A. Jan Kutylowski 2009-05-25 15:18 ` Jason Rumney @ 2009-06-21 3:50 ` Emacs bug Tracking System 1 sibling, 0 replies; 4+ messages in thread From: Emacs bug Tracking System @ 2009-06-21 3:50 UTC (permalink / raw) To: Jason Rumney [-- Attachment #1: Type: text/plain, Size: 854 bytes --] Your message dated Sun, 21 Jun 2009 11:43:42 +0800 with message-id <4A3DAC6E.7020505@f2s.com> and subject line Re: bug#3237: Bug report, going back to 22.1 has caused the Emacs bug report #3237, regarding Bug report, going back to 22.1 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@emacsbugs.donarmstrong.com immediately.) -- 3237: http://emacsbugs.donarmstrong.com/cgi-bin/bugreport.cgi?bug=3237 Emacs Bug Tracking System Contact owner@emacsbugs.donarmstrong.com with problems [-- Attachment #2: Type: message/rfc822, Size: 6217 bytes --] From: "A. Jan Kutylowski" <a.j.kutylowski@gmail.com> To: bug-gnu-emacs@gnu.org Subject: Bug report, going back to 22.1 Date: Thu, 07 May 2009 19:14:21 +0200 Message-ID: <4A0316ED.9060301@gmail.com> From: <andrzejk@SV-STUD-0-93> To: bug-gnu-emacs@gnu.org Subject: keyboard --text follows this line-- Please write in English if possible, because the Emacs maintainers usually do not have translators to read other languages for them. Your bug report will be posted to the bug-gnu-emacs@gnu.org mailing list, and to the gnu.emacs.bug news group. Please describe exactly what actions triggered the bug and the precise symptoms of the bug: +++ After Emacs 22.1 Emacs does not recognize a change in the keyboard setup under Windows XP. I have been using Emacs since version 20.3 to write in Polish after declaring the Polish language for the keyboard and after declaring cp1250-dos for the kayboard (and appropriately for the buffer involved). Polish "letters" are obtained using AltGr +key, or AltGr+Shift (right) +key. In particular, Emacs 22.3 has that bug, although retrospective testing showed that 22.1 reacts properly. This is a considerable impediment. I am looking forward to your help +++++ If Emacs crashed, and you have the Emacs process in the gdb debugger, please include the output from the following gdb commands: `bt full' and `xbacktrace'. If you would like to further debug the crash, please read the file m:/PClib/Emacs22.3/etc/DEBUG for instructions. In GNU Emacs 22.3.1 (i386-mingw-nt5.1.2600) of 2008-09-06 on SOFT-MJASON Windowing system distributor `Microsoft Corp.', version 5.1.2600 configured using `configure --with-gcc (3.4)' Important settings: value of $LC_ALL: nil value of $LC_COLLATE: nil value of $LC_CTYPE: nil value of $LC_MESSAGES: nil value of $LC_MONETARY: nil value of $LC_NUMERIC: nil value of $LC_TIME: nil value of $LANG: NOR locale-coding-system: cp1252 default-enable-multibyte-characters: t Major mode: Fundamental Minor modes in effect: display-time-mode: t iswitchb-mode: t shell-dirtrack-mode: t show-paren-mode: t delete-selection-mode: t encoded-kbd-mode: t tooltip-mode: t tool-bar-mode: t mouse-wheel-mode: t menu-bar-mode: t file-name-shadow-mode: t global-font-lock-mode: t unify-8859-on-encoding-mode: t utf-translate-cjk-mode: t auto-compression-mode: t column-number-mode: t line-number-mode: t transient-mark-mode: t Recent input: <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <menu-bar> <help-menu> <send-emacs-bug-report> Recent messages: Loading iswitchb...done Loading time...done Loading advice...done Loading bytecomp...done Loading paren...done Loading m:/PClib/Emacs22.3/site-lisp/header/header.el (source)...done Loading desktop...done No desktop file. For information about GNU Emacs and the GNU system, type C-h C-a. Loading emacsbug...done [-- Attachment #3: Type: message/rfc822, Size: 4162 bytes --] From: Jason Rumney <jasonr@f2s.com> To: 3237-done@emacsbugs.donarmstrong.com Cc: "A. Jan Kutylowski" <a.j.kutylowski@gmail.com> Subject: Re: bug#3237: Bug report, going back to 22.1 Date: Sun, 21 Jun 2009 11:43:42 +0800 Message-ID: <4A3DAC6E.7020505@f2s.com> Jason Rumney wrote: > Please explain what keys you press, what characters you expect to see, > and what characters you do see. I have tried setting my keyboard to > Polish (214) and pressing the keys indicated in the keymap at > http://ascii-table.com/img/keyboard-214.png > All of the keys that are present on my keyboard seem to work, but some > of the characters you report above are missing from that keymap. > Windows has another Polish keymap, but I can't find any documentation > of which keys I need to press to get non-ASCII characters. OK, I found the bug. The characters in question are in the range 128-159 in windows-1250. Since your system codepage is windows-1252, they are being interpreted by Emacs first as windows-1252 characters. These map to unicode codepoints above 255, so the keyboard-coding-system has no effect on them (they are outside the range expected by windows-1250). Actually, this reveals that since the addition of multibyte keyboard handling in w32term.c, it will only work if the system codepage matches the keyboard locale, or if the system codepage is windows-1252 and the input characters are in the range 160-255 where their values will not be changed, and keyboard-coding-system can be used to postprocess them. Since this is a regression compared to the raw keyboard input of Emacs 22.1 and earlier which could always be post-processed by keyboard-coding-system, I have checked in the fix before the branch is created. ^ permalink raw reply [flat|nested] 4+ messages in thread
[parent not found: <4A3CA018.8000801@gmail.com>]
* bug#3237: Bug report, going back to 22.1 [not found] <4A3CA018.8000801@gmail.com> @ 2009-06-20 16:34 ` Jason Rumney 0 siblings, 0 replies; 4+ messages in thread From: Jason Rumney @ 2009-06-20 16:34 UTC (permalink / raw) To: A. Jan Kutylowski; +Cc: 3237 A. Jan Kutylowski wrote: > ęĘ > Üü > óÓ > ąĄ > ąĄ > ALT-GR s malfunctions, cmall and capital letter > łŁ > öÖ > äÄ > żŻ > Ź AltGr x malfunctions, OK for capital letter > ćĆ Please explain what keys you press, what characters you expect to see, and what characters you do see. I have tried setting my keyboard to Polish (214) and pressing the keys indicated in the keymap at http://ascii-table.com/img/keyboard-214.png All of the keys that are present on my keyboard seem to work, but some of the characters you report above are missing from that keymap. Windows has another Polish keymap, but I can't find any documentation of which keys I need to press to get non-ASCII characters. ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2009-06-21 3:50 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- [not found] <4A3DAC6E.7020505@f2s.com> 2009-05-07 17:14 ` bug#3237: Bug report, going back to 22.1 A. Jan Kutylowski 2009-05-25 15:18 ` Jason Rumney 2009-06-21 3:50 ` bug#3237: marked as done (Bug report, going back to 22.1) Emacs bug Tracking System [not found] <4A3CA018.8000801@gmail.com> 2009-06-20 16:34 ` bug#3237: Bug report, going back to 22.1 Jason Rumney
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).