* bug#700: hideshow.el micro improvements
@ 2008-08-12 11:52 ` Dmitry Bolshakov
2009-08-09 2:50 ` bug#700: marked as done (hideshow.el micro improvements) Emacs bug Tracking System
0 siblings, 1 reply; 7+ messages in thread
From: Dmitry Bolshakov @ 2008-08-12 11:52 UTC (permalink / raw)
To: bug-gnu-emacs
[-- Attachment #1: Type: text/plain, Size: 228 bytes --]
hideshow.el micro improvements
1. show
xxx {...} yyy {...}
instead of
xxx {...
}
2. in the hs-hide-level-recursive skip parenthesis inside comments
because of they can be unbalanced
--
With best regards
Dmitry Bolshakov
[-- Attachment #2: hideshow_my.zip --]
[-- Type: application/x-zip-compressed, Size: 25041 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* bug#700: marked as done (hideshow.el micro improvements)
2008-08-12 11:52 ` bug#700: hideshow.el micro improvements Dmitry Bolshakov
@ 2009-08-09 2:50 ` Emacs bug Tracking System
0 siblings, 0 replies; 7+ messages in thread
From: Emacs bug Tracking System @ 2009-08-09 2:50 UTC (permalink / raw)
To: Chong Yidong
[-- Attachment #1: Type: text/plain, Size: 852 bytes --]
Your message dated Sat, 08 Aug 2009 22:45:28 -0400
with message-id <87my69zovr.fsf@cyd.mit.edu>
and subject line Re: bug#700: hideshow.el micro improvements
has caused the Emacs bug report #700,
regarding hideshow.el micro improvements
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@emacsbugs.donarmstrong.com
immediately.)
--
700: http://emacsbugs.donarmstrong.com/cgi-bin/bugreport.cgi?bug=700
Emacs Bug Tracking System
Contact owner@emacsbugs.donarmstrong.com with problems
[-- Attachment #2: Type: message/rfc822, Size: 36408 bytes --]
[-- Attachment #2.1.1: Type: text/plain, Size: 228 bytes --]
hideshow.el micro improvements
1. show
xxx {...} yyy {...}
instead of
xxx {...
}
2. in the hs-hide-level-recursive skip parenthesis inside comments
because of they can be unbalanced
--
With best regards
Dmitry Bolshakov
[-- Attachment #2.1.2: hideshow_my.zip --]
[-- Type: application/x-zip-compressed, Size: 25041 bytes --]
[-- Attachment #3: Type: message/rfc822, Size: 1797 bytes --]
From: Chong Yidong <cyd@stupidchicken.com>
To: Dan Nicolaescu <dann@ics.uci.edu>
Cc: Dmitry Bolshakov <dmitry.bolshakov@bridge-quest.com>, 700-done@emacsbugs.donarmstrong.com
Subject: Re: bug#700: hideshow.el micro improvements
Date: Sat, 08 Aug 2009 22:45:28 -0400
Message-ID: <87my69zovr.fsf@cyd.mit.edu>
Dan Nicolaescu <dann@ics.uci.edu> writes:
> Can you please debug your change, as it has caused problems for lisp
> files, see:
>
> http://emacsbugs.donarmstrong.com/cgi-bin/bugreport.cgi?bug=3896
>
> and
>
> http://lists.gnu.org/archive/html/emacs-devel/2009-07/msg00874.html
I've checked in a fix. I think it works properly for both Lisp and C
now.
^ permalink raw reply [flat|nested] 7+ messages in thread
* bug#700: hideshow.el micro improvements
@ 2009-07-06 14:18 Chong Yidong
2009-08-06 10:52 ` Dmitry Bolshakov
0 siblings, 1 reply; 7+ messages in thread
From: Chong Yidong @ 2009-07-06 14:18 UTC (permalink / raw)
To: Dmitry Bolshakov; +Cc: 700
> 1. show
>
> xxx {...} yyy {...}
>
> instead of
>
> xxx {...
> }
You patch did not work properly for GNU-style braces. I've checked in a
fix that works a little better for both cases.
> 2. in the hs-hide-level-recursive skip parenthesis inside comments
> because of they can be unbalanced
Could you give a test recipe that shows this bug?
^ permalink raw reply [flat|nested] 7+ messages in thread
* bug#700: hideshow.el micro improvements
2009-07-06 14:18 bug#700: hideshow.el micro improvements Chong Yidong
@ 2009-08-06 10:52 ` Dmitry Bolshakov
2009-08-07 5:49 ` Dan Nicolaescu
0 siblings, 1 reply; 7+ messages in thread
From: Dmitry Bolshakov @ 2009-08-06 10:52 UTC (permalink / raw)
To: Chong Yidong; +Cc: 700
[-- Attachment #1: Type: text/plain, Size: 3410 bytes --]
-------- Original Message --------
Subject: Re: hideshow.el micro improvements
From: Chong Yidong <cyd@stupidchicken.com>
To: Dmitry Bolshakov <dmitry.bolshakov@bridge-quest.com>
Cc: 700@emacsbugs.donarmstrong.com
Date: 06.07.2009 18:18
>> 1. show
>>
>> xxx {...} yyy {...}
>>
>> instead of
>>
>> xxx {...
>> }
>
> You patch did not work properly for GNU-style braces. I've checked in a
> fix that works a little better for both cases.
>
>> 2. in the hs-hide-level-recursive skip parenthesis inside comments
>> because of they can be unbalanced
>
> Could you give a test recipe that shows this bug?
>
>
hi, see attachment
open file
M-x hs-minor-mode
M-x eval-expression
(hs-hide-level 1)
and i get:
Debugger entered--Lisp error: (scan-error "Unbalanced parentheses" 60 156)
scan-sexps(60 1)
forward-sexp(1)
funcall(forward-sexp 1)
(progn (set-match-data match-data) (goto-char (match-beginning hs-block-start-mdata-select)) (funcall hs-forward-sexp-func arg))
(unwind-protect (progn (set-match-data match-data) (goto-char ...) (funcall hs-forward-sexp-func arg)) (set-match-data save-match-data-internal (quote evaporate)))
(let ((save-match-data-internal ...)) (unwind-protect (progn ... ... ...) (set-match-data save-match-data-internal ...)))
(save-match-data (set-match-data match-data) (goto-char (match-beginning hs-block-start-mdata-select)) (funcall hs-forward-sexp-func arg))
hs-forward-sexp((60 61 #<buffer unbalanced-braces-test.pl>) 1)
(progn (hs-forward-sexp mdata 1) (end-of-line) (point))
(let* ((mdata ...) (pure-p ...) (p ...) (q ...) ov) (when (and ... ...) (cond ... ...) (hs-make-overlay p q ... ...)) (goto-char (if end q ...)))
(progn (let* (... ... ... ... ov) (when ... ... ...) (goto-char ...)))
(if (looking-at hs-block-start-regexp) (progn (let* ... ... ...)))
(when (looking-at hs-block-start-regexp) (let* (... ... ... ... ov) (when ... ... ...) (goto-char ...)))
(if comment-reg (hs-hide-comment-region (car comment-reg) (cadr comment-reg) end) (when (looking-at hs-block-start-regexp) (let* ... ... ...)))
hs-hide-block-at-point(t)
(if (> arg 1) (hs-hide-level-recursive (1- arg) minp maxp) (goto-char (match-beginning hs-block-start-mdata-select)) (hs-hide-block-at-point t))
(while (progn (forward-comment ...) (and ... ...)) (if (> arg 1) (hs-hide-level-recursive ... minp maxp) (goto-char ...) (hs-hide-block-at-point t)))
hs-hide-level-recursive(1 1 156)
(save-excursion (message "Hiding blocks ...") (hs-hide-level-recursive arg (point-min) (point-max)) (message "Hiding blocks ... done"))
(let ((inhibit-point-motion-hooks t) (case-fold-search t)) (save-excursion (message "Hiding blocks ...") (hs-hide-level-recursive arg ... ...) (message "Hiding blocks ... done")) (run-hooks (quote hs-hide-hook)))
(progn (let (... ...) (save-excursion ... ... ...) (run-hooks ...)))
(if hs-minor-mode (progn (let ... ... ...)))
(when hs-minor-mode (let (... ...) (save-excursion ... ... ...) (run-hooks ...)))
(hs-life-goes-on (save-excursion (message "Hiding blocks ...") (hs-hide-level-recursive arg ... ...) (message "Hiding blocks ... done")) (run-hooks (quote hs-hide-hook)))
hs-hide-level(1)
eval((hs-hide-level 1))
eval-expression((hs-hide-level 1) nil)
call-interactively(eval-expression)
execute-extended-command(nil)
call-interactively(execute-extended-command)
--
With best regards
Dmitry Bolshakov
[-- Attachment #2: unbalanced-braces-test.pl --]
[-- Type: text/plain, Size: 155 bytes --]
#!/usr/bin/perl
use strict;
# left brace inside comments { cause error
sub blabla {
for (my $i = 0; $i < 10; $i++) {
printf("\$i is %d\n", $i);
}
}
^ permalink raw reply [flat|nested] 7+ messages in thread
* bug#700: hideshow.el micro improvements
2009-08-06 10:52 ` Dmitry Bolshakov
@ 2009-08-07 5:49 ` Dan Nicolaescu
2009-08-07 14:24 ` Chong Yidong
2009-08-07 16:13 ` Dmitry Bolshakov
0 siblings, 2 replies; 7+ messages in thread
From: Dan Nicolaescu @ 2009-08-07 5:49 UTC (permalink / raw)
To: Dmitry Bolshakov; +Cc: 700, Chong Yidong
Dmitry Bolshakov <dmitry.bolshakov@bridge-quest.com> writes:
> -------- Original Message --------
> Subject: Re: hideshow.el micro improvements
> From: Chong Yidong <cyd@stupidchicken.com>
> To: Dmitry Bolshakov <dmitry.bolshakov@bridge-quest.com>
> Cc: 700@emacsbugs.donarmstrong.com
> Date: 06.07.2009 18:18
>
> >> 1. show
> >>
> >> xxx {...} yyy {...}
> >>
> >> instead of
> >>
> >> xxx {...
> >> }
Can you please debug your change, as it has caused problems for lisp
files, see:
http://emacsbugs.donarmstrong.com/cgi-bin/bugreport.cgi?bug=3896
and
http://lists.gnu.org/archive/html/emacs-devel/2009-07/msg00874.html
Thanks!
> > You patch did not work properly for GNU-style braces. I've checked in a
> > fix that works a little better for both cases.
> >
> >> 2. in the hs-hide-level-recursive skip parenthesis inside comments
> >> because of they can be unbalanced
> >
> > Could you give a test recipe that shows this bug?
> >
> >
> hi, see attachment
>
> open file
> M-x hs-minor-mode
> M-x eval-expression
> (hs-hide-level 1)
>
> and i get:
>
> Debugger entered--Lisp error: (scan-error "Unbalanced parentheses" 60 156)
> scan-sexps(60 1)
> forward-sexp(1)
> funcall(forward-sexp 1)
> (progn (set-match-data match-data) (goto-char (match-beginning hs-block-start-mdata-select)) (funcall hs-forward-sexp-func arg))
> (unwind-protect (progn (set-match-data match-data) (goto-char ...) (funcall hs-forward-sexp-func arg)) (set-match-data save-match-data-internal (quote evaporate)))
> (let ((save-match-data-internal ...)) (unwind-protect (progn ... ... ...) (set-match-data save-match-data-internal ...)))
> (save-match-data (set-match-data match-data) (goto-char (match-beginning hs-block-start-mdata-select)) (funcall hs-forward-sexp-func arg))
> hs-forward-sexp((60 61 #<buffer unbalanced-braces-test.pl>) 1)
> (progn (hs-forward-sexp mdata 1) (end-of-line) (point))
> (let* ((mdata ...) (pure-p ...) (p ...) (q ...) ov) (when (and ... ...) (cond ... ...) (hs-make-overlay p q ... ...)) (goto-char (if end q ...)))
> (progn (let* (... ... ... ... ov) (when ... ... ...) (goto-char ...)))
> (if (looking-at hs-block-start-regexp) (progn (let* ... ... ...)))
> (when (looking-at hs-block-start-regexp) (let* (... ... ... ... ov) (when ... ... ...) (goto-char ...)))
> (if comment-reg (hs-hide-comment-region (car comment-reg) (cadr comment-reg) end) (when (looking-at hs-block-start-regexp) (let* ... ... ...)))
> hs-hide-block-at-point(t)
> (if (> arg 1) (hs-hide-level-recursive (1- arg) minp maxp) (goto-char (match-beginning hs-block-start-mdata-select)) (hs-hide-block-at-point t))
> (while (progn (forward-comment ...) (and ... ...)) (if (> arg 1) (hs-hide-level-recursive ... minp maxp) (goto-char ...) (hs-hide-block-at-point t)))
> hs-hide-level-recursive(1 1 156)
> (save-excursion (message "Hiding blocks ...") (hs-hide-level-recursive arg (point-min) (point-max)) (message "Hiding blocks ... done"))
> (let ((inhibit-point-motion-hooks t) (case-fold-search t)) (save-excursion (message "Hiding blocks ...") (hs-hide-level-recursive arg ... ...) (message "Hiding blocks ... done")) (run-hooks (quote hs-hide-hook)))
> (progn (let (... ...) (save-excursion ... ... ...) (run-hooks ...)))
> (if hs-minor-mode (progn (let ... ... ...)))
> (when hs-minor-mode (let (... ...) (save-excursion ... ... ...) (run-hooks ...)))
> (hs-life-goes-on (save-excursion (message "Hiding blocks ...") (hs-hide-level-recursive arg ... ...) (message "Hiding blocks ... done")) (run-hooks (quote hs-hide-hook)))
> hs-hide-level(1)
> eval((hs-hide-level 1))
> eval-expression((hs-hide-level 1) nil)
> call-interactively(eval-expression)
> execute-extended-command(nil)
> call-interactively(execute-extended-command)
>
>
> --
> With best regards
> Dmitry Bolshakov
> #!/usr/bin/perl
>
> use strict;
>
> # left brace inside comments { cause error
> sub blabla {
> for (my $i = 0; $i < 10; $i++) {
> printf("\$i is %d\n", $i);
> }
> }
^ permalink raw reply [flat|nested] 7+ messages in thread
* bug#700: hideshow.el micro improvements
2009-08-07 5:49 ` Dan Nicolaescu
@ 2009-08-07 14:24 ` Chong Yidong
2009-08-07 16:13 ` Dmitry Bolshakov
1 sibling, 0 replies; 7+ messages in thread
From: Chong Yidong @ 2009-08-07 14:24 UTC (permalink / raw)
To: Dan Nicolaescu; +Cc: Dmitry Bolshakov, 700
Dan Nicolaescu <dann@ics.uci.edu> writes:
> Can you please debug your change, as it has caused problems for lisp
> files, see:
>
> http://emacsbugs.donarmstrong.com/cgi-bin/bugreport.cgi?bug=3896
>
> and
>
> http://lists.gnu.org/archive/html/emacs-devel/2009-07/msg00874.html
I'm busy this week, but I'll see if I can do it this weekend.
^ permalink raw reply [flat|nested] 7+ messages in thread
* bug#700: hideshow.el micro improvements
2009-08-07 5:49 ` Dan Nicolaescu
2009-08-07 14:24 ` Chong Yidong
@ 2009-08-07 16:13 ` Dmitry Bolshakov
1 sibling, 0 replies; 7+ messages in thread
From: Dmitry Bolshakov @ 2009-08-07 16:13 UTC (permalink / raw)
To: Dan Nicolaescu; +Cc: 700, Chong Yidong
[-- Attachment #1: Type: text/plain, Size: 4682 bytes --]
hi
i have done a test case
-------- Original Message --------
Subject: Re: bug#700: hideshow.el micro improvements
From: Dan Nicolaescu <dann@ics.uci.edu>
To: Dmitry Bolshakov <dmitry.bolshakov@bridge-quest.com>
Cc: 700@emacsbugs.donarmstrong.com, Chong Yidong <cyd@stupidchicken.com>
Date: 07.08.2009 9:49
> Dmitry Bolshakov <dmitry.bolshakov@bridge-quest.com> writes:
>
> > -------- Original Message --------
> > Subject: Re: hideshow.el micro improvements
> > From: Chong Yidong <cyd@stupidchicken.com>
> > To: Dmitry Bolshakov <dmitry.bolshakov@bridge-quest.com>
> > Cc: 700@emacsbugs.donarmstrong.com
> > Date: 06.07.2009 18:18
> >
> > >> 1. show
> > >>
> > >> xxx {...} yyy {...}
> > >>
> > >> instead of
> > >>
> > >> xxx {...
> > >> }
>
> Can you please debug your change, as it has caused problems for lisp
> files, see:
>
> http://emacsbugs.donarmstrong.com/cgi-bin/bugreport.cgi?bug=3896
>
> and
>
> http://lists.gnu.org/archive/html/emacs-devel/2009-07/msg00874.html
>
> Thanks!
>
> > > You patch did not work properly for GNU-style braces. I've checked in a
> > > fix that works a little better for both cases.
> > >
> > >> 2. in the hs-hide-level-recursive skip parenthesis inside comments
> > >> because of they can be unbalanced
> > >
> > > Could you give a test recipe that shows this bug?
> > >
> > >
> > hi, see attachment
> >
> > open file
> > M-x hs-minor-mode
> > M-x eval-expression
> > (hs-hide-level 1)
> >
> > and i get:
> >
> > Debugger entered--Lisp error: (scan-error "Unbalanced parentheses" 60 156)
> > scan-sexps(60 1)
> > forward-sexp(1)
> > funcall(forward-sexp 1)
> > (progn (set-match-data match-data) (goto-char (match-beginning hs-block-start-mdata-select)) (funcall hs-forward-sexp-func arg))
> > (unwind-protect (progn (set-match-data match-data) (goto-char ...) (funcall hs-forward-sexp-func arg)) (set-match-data save-match-data-internal (quote evaporate)))
> > (let ((save-match-data-internal ...)) (unwind-protect (progn ... ... ...) (set-match-data save-match-data-internal ...)))
> > (save-match-data (set-match-data match-data) (goto-char (match-beginning hs-block-start-mdata-select)) (funcall hs-forward-sexp-func arg))
> > hs-forward-sexp((60 61 #<buffer unbalanced-braces-test.pl>) 1)
> > (progn (hs-forward-sexp mdata 1) (end-of-line) (point))
> > (let* ((mdata ...) (pure-p ...) (p ...) (q ...) ov) (when (and ... ...) (cond ... ...) (hs-make-overlay p q ... ...)) (goto-char (if end q ...)))
> > (progn (let* (... ... ... ... ov) (when ... ... ...) (goto-char ...)))
> > (if (looking-at hs-block-start-regexp) (progn (let* ... ... ...)))
> > (when (looking-at hs-block-start-regexp) (let* (... ... ... ... ov) (when ... ... ...) (goto-char ...)))
> > (if comment-reg (hs-hide-comment-region (car comment-reg) (cadr comment-reg) end) (when (looking-at hs-block-start-regexp) (let* ... ... ...)))
> > hs-hide-block-at-point(t)
> > (if (> arg 1) (hs-hide-level-recursive (1- arg) minp maxp) (goto-char (match-beginning hs-block-start-mdata-select)) (hs-hide-block-at-point t))
> > (while (progn (forward-comment ...) (and ... ...)) (if (> arg 1) (hs-hide-level-recursive ... minp maxp) (goto-char ...) (hs-hide-block-at-point t)))
> > hs-hide-level-recursive(1 1 156)
> > (save-excursion (message "Hiding blocks ...") (hs-hide-level-recursive arg (point-min) (point-max)) (message "Hiding blocks ... done"))
> > (let ((inhibit-point-motion-hooks t) (case-fold-search t)) (save-excursion (message "Hiding blocks ...") (hs-hide-level-recursive arg ... ...) (message "Hiding blocks ... done")) (run-hooks (quote hs-hide-hook)))
> > (progn (let (... ...) (save-excursion ... ... ...) (run-hooks ...)))
> > (if hs-minor-mode (progn (let ... ... ...)))
> > (when hs-minor-mode (let (... ...) (save-excursion ... ... ...) (run-hooks ...)))
> > (hs-life-goes-on (save-excursion (message "Hiding blocks ...") (hs-hide-level-recursive arg ... ...) (message "Hiding blocks ... done")) (run-hooks (quote hs-hide-hook)))
> > hs-hide-level(1)
> > eval((hs-hide-level 1))
> > eval-expression((hs-hide-level 1) nil)
> > call-interactively(eval-expression)
> > execute-extended-command(nil)
> > call-interactively(execute-extended-command)
> >
> >
> > --
> > With best regards
> > Dmitry Bolshakov
> > #!/usr/bin/perl
> >
> > use strict;
> >
> > # left brace inside comments { cause error
> > sub blabla {
> > for (my $i = 0; $i < 10; $i++) {
> > printf("\$i is %d\n", $i);
> > }
> > }
>
>
--
With best regards
Dmitry Bolshakov
[-- Attachment #2: bug-700 (hideshow).zip --]
[-- Type: application/x-zip-compressed, Size: 158236 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2009-08-09 2:50 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <87my69zovr.fsf@cyd.mit.edu>
2008-08-12 11:52 ` bug#700: hideshow.el micro improvements Dmitry Bolshakov
2009-08-09 2:50 ` bug#700: marked as done (hideshow.el micro improvements) Emacs bug Tracking System
2009-07-06 14:18 bug#700: hideshow.el micro improvements Chong Yidong
2009-08-06 10:52 ` Dmitry Bolshakov
2009-08-07 5:49 ` Dan Nicolaescu
2009-08-07 14:24 ` Chong Yidong
2009-08-07 16:13 ` Dmitry Bolshakov
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).