unofficial mirror of bug-gnu-emacs@gnu.org 
 help / color / mirror / code / Atom feed
From: Michal Nazarewicz <mina86@mina86.com>
To: 24071@debbugs.gnu.org
Subject: bug#24071: [PATCH 7/7] Refactor regex character class parsing in [:name:]
Date: Wed, 27 Jul 2016 18:50:47 +0200	[thread overview]
Message-ID: <1469638247-20131-7-git-send-email-mina86@mina86.com> (raw)
In-Reply-To: <1469638247-20131-1-git-send-email-mina86@mina86.com>

re_wctype function is used in three separate places and in all of
those places almost exact code extracting the name from [:name:]
surrounds it.  Furthermore, re_wctype requires a NUL-terminated
string, so the name of the character class is copied to a temporary
buffer.

The code duplication and unnecessary memory copying can be avoided by
pushing the responsibility of parsing the whole [:name:] sequence to
the function.

Furthermore, since now the function has access to the length of the
character class name (since it’s doing the parsing), it can take
advantage of that information in skipping some string comparisons and
using a constant-length memcmp instead of strcmp which needs to take
care of NUL bytes.

* src/regex.c (re_wctype): Delete function.  Replace it with:
(re_wctype_parse): New function which parses a whole [:name:] string
and returns a RECC_* constant or -1 if the string is not of [:name:]
format.
(regex_compile): Use re_wctype_parse.
* src/syntax.c (skip_chars): Use re_wctype_parse.
---
 src/regex.c  | 312 +++++++++++++++++++++++++++++------------------------------
 src/regex.h  |  14 +--
 src/syntax.c |  96 +++++-------------
 3 files changed, 183 insertions(+), 239 deletions(-)

diff --git a/src/regex.c b/src/regex.c
index cca00e9..d482316 100644
--- a/src/regex.c
+++ b/src/regex.c
@@ -1959,29 +1959,98 @@ struct range_table_work_area
 \f
 #if ! WIDE_CHAR_SUPPORT
 
-/* Map a string to the char class it names (if any).  */
+/* Parse a character class, i.e. string such as "[:name:]".  *strp
+   points to the string to be parsed and limit is length, in bytes, of
+   that string.
+
+   If *strp point to a string that begins with "[:name:]", where name is
+   a non-empty sequence of lower case letters, *strp will be advanced past the
+   closing square bracket and RECC_* constant which maps to the name will be
+   returned.  If name is not a valid character class name zero, or RECC_ERROR,
+   is returned.
+
+   Otherwise, if *strp doesn’t begin with "[:name:]", -1 is returned.
+
+   The function can be used on ASCII and multibyte (UTF-8-encoded) strings.
+ */
 re_wctype_t
-re_wctype (const_re_char *str)
+re_wctype_parse (const unsigned char **strp, unsigned limit)
 {
-  const char *string = (const char *) str;
-  if      (STREQ (string, "alnum"))	return RECC_ALNUM;
-  else if (STREQ (string, "alpha"))	return RECC_ALPHA;
-  else if (STREQ (string, "word"))	return RECC_WORD;
-  else if (STREQ (string, "ascii"))	return RECC_ASCII;
-  else if (STREQ (string, "nonascii"))	return RECC_NONASCII;
-  else if (STREQ (string, "graph"))	return RECC_GRAPH;
-  else if (STREQ (string, "lower"))	return RECC_LOWER;
-  else if (STREQ (string, "print"))	return RECC_PRINT;
-  else if (STREQ (string, "punct"))	return RECC_PUNCT;
-  else if (STREQ (string, "space"))	return RECC_SPACE;
-  else if (STREQ (string, "upper"))	return RECC_UPPER;
-  else if (STREQ (string, "unibyte"))	return RECC_UNIBYTE;
-  else if (STREQ (string, "multibyte"))	return RECC_MULTIBYTE;
-  else if (STREQ (string, "digit"))	return RECC_DIGIT;
-  else if (STREQ (string, "xdigit"))	return RECC_XDIGIT;
-  else if (STREQ (string, "cntrl"))	return RECC_CNTRL;
-  else if (STREQ (string, "blank"))	return RECC_BLANK;
-  else return 0;
+  const char *beg = (const char *)*strp, *end, *it;
+
+  if (limit < 5 || beg[0] != '[' || beg[1] != ':')
+    return -1;
+
+  end = beg + limit - 2;  /* ‘- 2’ for the closing ":]" */
+  beg += 2;  /* skip opening "[:" */
+  it = beg;
+  while (it != end && *it >= 'a' && *it <= 'z')
+    ++it;
+  if (it[0] != ':' || it[1] != ']')
+    return -1;
+
+  *strp = (const unsigned char *)(it + 2);
+
+  /* Sort tests in the length=five case by frequency the classes to minimise
+     number of times we fail the comparison.  The frequencies of character class
+     names used in Emacs sources as of 2016-07-27:
+
+     $ find \( -name \*.c -o -name \*.el \) -exec grep -h '\[:[a-z]*:]' {} + |
+           sed 's/]/]\n/g' |grep -o '\[:[a-z]*:]' |sort |uniq -c |sort -nr
+         213 [:alnum:]
+         104 [:alpha:]
+          62 [:space:]
+          39 [:digit:]
+          36 [:blank:]
+          26 [:word:]
+          26 [:upper:]
+          21 [:lower:]
+          10 [:xdigit:]
+          10 [:punct:]
+          10 [:ascii:]
+           4 [:nonascii:]
+           4 [:graph:]
+           2 [:print:]
+           2 [:cntrl:]
+           1 [:ff:]
+
+     If you update this list, consider also updating chain of or’ed conditions
+     in execute_charset function.
+   */
+
+  switch (it - beg) {
+  case 4:
+    if (!memcmp (beg, "word", 4))      return RECC_WORD;
+    break;
+  case 5:
+    if (!memcmp (beg, "alnum", 5))     return RECC_ALNUM;
+    if (!memcmp (beg, "alpha", 5))     return RECC_ALPHA;
+    if (!memcmp (beg, "space", 5))     return RECC_SPACE;
+    if (!memcmp (beg, "digit", 5))     return RECC_DIGIT;
+    if (!memcmp (beg, "blank", 5))     return RECC_BLANK;
+    if (!memcmp (beg, "upper", 5))     return RECC_UPPER;
+    if (!memcmp (beg, "lower", 5))     return RECC_LOWER;
+    if (!memcmp (beg, "punct", 5))     return RECC_PUNCT;
+    if (!memcmp (beg, "ascii", 5))     return RECC_ASCII;
+    if (!memcmp (beg, "graph", 5))     return RECC_GRAPH;
+    if (!memcmp (beg, "print", 5))     return RECC_PRINT;
+    if (!memcmp (beg, "cntrl", 5))     return RECC_CNTRL;
+    break;
+  case 6:
+    if (!memcmp (beg, "xdigit", 6))    return RECC_XDIGIT;
+    break;
+  case 7:
+    if (!memcmp (beg, "unibyte", 7))   return RECC_UNIBYTE;
+    break;
+  case 8:
+    if (!memcmp (beg, "nonascii", 8))  return RECC_NONASCII;
+    break;
+  case 9:
+    if (!memcmp (beg, "multibyte", 9)) return RECC_MULTIBYTE;
+    break;
+  }
+
+  return RECC_ERROR;
 }
 
 /* True if CH is in the char class CC.  */
@@ -2766,10 +2835,74 @@ regex_compile (const_re_char *pattern, size_t size, reg_syntax_t syntax,
 	      {
 		boolean escaped_char = false;
 		const unsigned char *p2 = p;
+		re_wctype_t cc;
 		re_wchar_t ch;
 
 		if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
 
+		/* See if we're at the beginning of a possible character
+		   class.  */
+		if (syntax & RE_CHAR_CLASSES &&
+		    (cc = re_wctype_parse(&p, pend - p)) != -1)
+		  {
+		    if (cc == 0)
+		      FREE_STACK_RETURN (REG_ECTYPE);
+
+		    if (p == pend)
+		      FREE_STACK_RETURN (REG_EBRACK);
+
+#ifndef emacs
+		    for (ch = 0; ch < (1 << BYTEWIDTH); ++ch)
+		      if (re_iswctype (btowc (ch), cc))
+			{
+			  c = TRANSLATE (ch);
+			  if (c < (1 << BYTEWIDTH))
+			    SET_LIST_BIT (c);
+			}
+#else  /* emacs */
+		    /* Most character classes in a multibyte match just set
+		       a flag.  Exceptions are is_blank, is_digit, is_cntrl, and
+		       is_xdigit, since they can only match ASCII characters.
+		       We don't need to handle them for multibyte.  They are
+		       distinguished by a negative wctype.  */
+
+		    /* Setup the gl_state object to its buffer-defined value.
+		       This hardcodes the buffer-global syntax-table for ASCII
+		       chars, while the other chars will obey syntax-table
+		       properties.  It's not ideal, but it's the way it's been
+		       done until now.  */
+		    SETUP_BUFFER_SYNTAX_TABLE ();
+
+		    for (ch = 0; ch < 256; ++ch)
+		      {
+			c = RE_CHAR_TO_MULTIBYTE (ch);
+			if (! CHAR_BYTE8_P (c)
+			    && re_iswctype (c, cc))
+			  {
+			    SET_LIST_BIT (ch);
+			    c1 = TRANSLATE (c);
+			    if (c1 == c)
+			      continue;
+			    if (ASCII_CHAR_P (c1))
+			      SET_LIST_BIT (c1);
+			    else if ((c1 = RE_CHAR_TO_UNIBYTE (c1)) >= 0)
+			      SET_LIST_BIT (c1);
+			  }
+		      }
+		    SET_RANGE_TABLE_WORK_AREA_BIT
+		      (range_table_work, re_wctype_to_bit (cc));
+#endif	/* emacs */
+		    /* In most cases the matching rule for char classes only
+		       uses the syntax table for multibyte chars, so that the
+		       content of the syntax-table is not hardcoded in the
+		       range_table.  SPACE and WORD are the two exceptions.  */
+		    if ((1 << cc) & ((1 << RECC_SPACE) | (1 << RECC_WORD)))
+		      bufp->used_syntax = 1;
+
+		    /* Repeat the loop. */
+		    continue;
+		  }
+
 		/* Don't translate yet.  The range TRANSLATE(X..Y) cannot
 		   always be determined from TRANSLATE(X) and TRANSLATE(Y)
 		   So the translation is done later in a loop.  Example:
@@ -2793,119 +2926,6 @@ regex_compile (const_re_char *pattern, size_t size, reg_syntax_t syntax,
 		      break;
 		  }
 
-		/* See if we're at the beginning of a possible character
-		   class.  */
-
-		if (!escaped_char &&
-		    syntax & RE_CHAR_CLASSES && c == '[' && *p == ':')
-		  {
-		    /* Leave room for the null.  */
-		    unsigned char str[CHAR_CLASS_MAX_LENGTH + 1];
-		    const unsigned char *class_beg;
-
-		    PATFETCH (c);
-		    c1 = 0;
-		    class_beg = p;
-
-		    /* If pattern is `[[:'.  */
-		    if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
-
-		    for (;;)
-		      {
-		        PATFETCH (c);
-		        if ((c == ':' && *p == ']') || p == pend)
-		          break;
-			if (c1 < CHAR_CLASS_MAX_LENGTH)
-			  str[c1++] = c;
-			else
-			  /* This is in any case an invalid class name.  */
-			  str[0] = '\0';
-		      }
-		    str[c1] = '\0';
-
-		    /* If isn't a word bracketed by `[:' and `:]':
-		       undo the ending character, the letters, and
-		       leave the leading `:' and `[' (but set bits for
-		       them).  */
-		    if (c == ':' && *p == ']')
-		      {
-			re_wctype_t cc = re_wctype (str);
-
-			if (cc == 0)
-			  FREE_STACK_RETURN (REG_ECTYPE);
-
-                        /* Throw away the ] at the end of the character
-                           class.  */
-                        PATFETCH (c);
-
-                        if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
-
-#ifndef emacs
-			for (ch = 0; ch < (1 << BYTEWIDTH); ++ch)
-			  if (re_iswctype (btowc (ch), cc))
-			    {
-			      c = TRANSLATE (ch);
-			      if (c < (1 << BYTEWIDTH))
-				SET_LIST_BIT (c);
-			    }
-#else  /* emacs */
-			/* Most character classes in a multibyte match
-			   just set a flag.  Exceptions are is_blank,
-			   is_digit, is_cntrl, and is_xdigit, since
-			   they can only match ASCII characters.  We
-			   don't need to handle them for multibyte.
-			   They are distinguished by a negative wctype.  */
-
-			/* Setup the gl_state object to its buffer-defined
-			   value.  This hardcodes the buffer-global
-			   syntax-table for ASCII chars, while the other chars
-			   will obey syntax-table properties.  It's not ideal,
-			   but it's the way it's been done until now.  */
-			SETUP_BUFFER_SYNTAX_TABLE ();
-
-			for (ch = 0; ch < 256; ++ch)
-			  {
-			    c = RE_CHAR_TO_MULTIBYTE (ch);
-			    if (! CHAR_BYTE8_P (c)
-				&& re_iswctype (c, cc))
-			      {
-				SET_LIST_BIT (ch);
-				c1 = TRANSLATE (c);
-				if (c1 == c)
-				  continue;
-				if (ASCII_CHAR_P (c1))
-				  SET_LIST_BIT (c1);
-				else if ((c1 = RE_CHAR_TO_UNIBYTE (c1)) >= 0)
-				  SET_LIST_BIT (c1);
-			      }
-			  }
-			SET_RANGE_TABLE_WORK_AREA_BIT
-			  (range_table_work, re_wctype_to_bit (cc));
-#endif	/* emacs */
-			/* In most cases the matching rule for char classes
-			   only uses the syntax table for multibyte chars,
-			   so that the content of the syntax-table is not
-			   hardcoded in the range_table.  SPACE and WORD are
-			   the two exceptions.  */
-			if ((1 << cc) & ((1 << RECC_SPACE) | (1 << RECC_WORD)))
-			  bufp->used_syntax = 1;
-
-			/* Repeat the loop. */
-			continue;
-		      }
-		    else
-		      {
-			/* Go back to right after the "[:".  */
-			p = class_beg;
-			SET_LIST_BIT ('[');
-
-			/* Because the `:' may start the range, we
-			   can't simply set bit and repeat the loop.
-			   Instead, just set it to C and handle below.  */
-			c = ':';
-		      }
-		  }
-
 		if (p < pend && p[0] == '-' && p[1] != ']')
 		  {
 
@@ -4645,28 +4665,8 @@ execute_charset (const_re_char **pp, unsigned c, unsigned corig, bool unibyte)
       re_wchar_t range_start, range_end;
 
   /* Sort tests by the most commonly used classes with some adjustment to which
-     tests are easiest to perform.  Frequencies of character class names used in
-     Emacs sources as of 2016-07-15:
-
-     $ find \( -name \*.c -o -name \*.el \) -exec grep -h '\[:[a-z]*:]' {} + |
-           sed 's/]/]\n/g' |grep -o '\[:[a-z]*:]' |sort |uniq -c |sort -nr
-         213 [:alnum:]
-         104 [:alpha:]
-          62 [:space:]
-          39 [:digit:]
-          36 [:blank:]
-          26 [:upper:]
-          24 [:word:]
-          21 [:lower:]
-          10 [:punct:]
-          10 [:ascii:]
-           9 [:xdigit:]
-           4 [:nonascii:]
-           4 [:graph:]
-           2 [:print:]
-           2 [:cntrl:]
-           1 [:ff:]
-   */
+     tests are easiest to perform.  Take a look at comment in re_wctype_parse
+     for table with frequencies of character class names. */
 
       if ((class_bits & BIT_MULTIBYTE) ||
 	  (class_bits & BIT_ALNUM && ISALNUM (c)) ||
diff --git a/src/regex.h b/src/regex.h
index 817167a..01b659a 100644
--- a/src/regex.h
+++ b/src/regex.h
@@ -585,25 +585,13 @@ extern void regfree (regex_t *__preg);
 /* Solaris 2.5 has a bug: <wchar.h> must be included before <wctype.h>.  */
 # include <wchar.h>
 # include <wctype.h>
-#endif
 
-#if WIDE_CHAR_SUPPORT
-/* The GNU C library provides support for user-defined character classes
-   and the functions from ISO C amendment 1.  */
-# ifdef CHARCLASS_NAME_MAX
-#  define CHAR_CLASS_MAX_LENGTH CHARCLASS_NAME_MAX
-# else
-/* This shouldn't happen but some implementation might still have this
-   problem.  Use a reasonable default value.  */
-#  define CHAR_CLASS_MAX_LENGTH 256
-# endif
 typedef wctype_t re_wctype_t;
 typedef wchar_t re_wchar_t;
 # define re_wctype wctype
 # define re_iswctype iswctype
 # define re_wctype_to_bit(cc) 0
 #else
-# define CHAR_CLASS_MAX_LENGTH  9 /* Namely, `multibyte'.  */
 # ifndef emacs
 #  define btowc(c) c
 # endif
@@ -621,7 +609,7 @@ typedef enum { RECC_ERROR = 0,
 } re_wctype_t;
 
 extern char re_iswctype (int ch,    re_wctype_t cc);
-extern re_wctype_t re_wctype (const unsigned char* str);
+extern re_wctype_t re_wctype_parse (const unsigned char **strp, unsigned limit);
 
 typedef int re_wchar_t;
 
diff --git a/src/syntax.c b/src/syntax.c
index f8d987b..667de40 100644
--- a/src/syntax.c
+++ b/src/syntax.c
@@ -1691,44 +1691,22 @@ skip_chars (bool forwardp, Lisp_Object string, Lisp_Object lim,
       /* At first setup fastmap.  */
       while (i_byte < size_byte)
 	{
-	  c = str[i_byte++];
-
-	  if (handle_iso_classes && c == '['
-	      && i_byte < size_byte
-	      && str[i_byte] == ':')
+	  if (handle_iso_classes)
 	    {
-	      const unsigned char *class_beg = str + i_byte + 1;
-	      const unsigned char *class_end = class_beg;
-	      const unsigned char *class_limit = str + size_byte - 2;
-	      /* Leave room for the null.  */
-	      unsigned char class_name[CHAR_CLASS_MAX_LENGTH + 1];
-	      re_wctype_t cc;
-
-	      if (class_limit - class_beg > CHAR_CLASS_MAX_LENGTH)
-		class_limit = class_beg + CHAR_CLASS_MAX_LENGTH;
-
-	      while (class_end < class_limit
-		     && *class_end >= 'a' && *class_end <= 'z')
-		class_end++;
-
-	      if (class_end == class_beg
-		  || *class_end != ':' || class_end[1] != ']')
-		goto not_a_class_name;
-
-	      memcpy (class_name, class_beg, class_end - class_beg);
-	      class_name[class_end - class_beg] = 0;
-
-	      cc = re_wctype (class_name);
+	      const unsigned char *ch = str + i_byte;
+	      re_wctype_t cc = re_wctype_parse (&ch, size_byte - i_byte);
 	      if (cc == 0)
 		error ("Invalid ISO C character class");
-
-	      iso_classes = Fcons (make_number (cc), iso_classes);
-
-	      i_byte = class_end + 2 - str;
-	      continue;
+	      if (cc != -1)
+		{
+		  iso_classes = Fcons (make_number (cc), iso_classes);
+		  i_byte = ch - str;
+		  continue;
+		}
 	    }
 
-	not_a_class_name:
+	  c = str[i_byte++];
+
 	  if (c == '\\')
 	    {
 	      if (i_byte == size_byte)
@@ -1808,54 +1786,32 @@ skip_chars (bool forwardp, Lisp_Object string, Lisp_Object lim,
       while (i_byte < size_byte)
 	{
 	  int leading_code = str[i_byte];
-	  c = STRING_CHAR_AND_LENGTH (str + i_byte, len);
-	  i_byte += len;
 
-	  if (handle_iso_classes && c == '['
-	      && i_byte < size_byte
-	      && STRING_CHAR (str + i_byte) == ':')
+	  if (handle_iso_classes)
 	    {
-	      const unsigned char *class_beg = str + i_byte + 1;
-	      const unsigned char *class_end = class_beg;
-	      const unsigned char *class_limit = str + size_byte - 2;
-	      /* Leave room for the null.	 */
-	      unsigned char class_name[CHAR_CLASS_MAX_LENGTH + 1];
-	      re_wctype_t cc;
-
-	      if (class_limit - class_beg > CHAR_CLASS_MAX_LENGTH)
-		class_limit = class_beg + CHAR_CLASS_MAX_LENGTH;
-
-	      while (class_end < class_limit
-		     && *class_end >= 'a' && *class_end <= 'z')
-		class_end++;
-
-	      if (class_end == class_beg
-		  || *class_end != ':' || class_end[1] != ']')
-		goto not_a_class_name_multibyte;
-
-	      memcpy (class_name, class_beg, class_end - class_beg);
-	      class_name[class_end - class_beg] = 0;
-
-	      cc = re_wctype (class_name);
+	      const unsigned char *ch = str + i_byte;
+	      re_wctype_t cc = re_wctype_parse (&ch, size_byte - i_byte);
 	      if (cc == 0)
 		error ("Invalid ISO C character class");
-
-	      iso_classes = Fcons (make_number (cc), iso_classes);
-
-	      i_byte = class_end + 2 - str;
-	      continue;
+	      if (cc != -1)
+		{
+		  iso_classes = Fcons (make_number (cc), iso_classes);
+		  i_byte = ch - str;
+		  continue;
+		}
 	    }
 
-	not_a_class_name_multibyte:
-	  if (c == '\\')
+	  if (leading_code== '\\')
 	    {
-	      if (i_byte == size_byte)
+	      if (++i_byte == size_byte)
 		break;
 
 	      leading_code = str[i_byte];
-	      c = STRING_CHAR_AND_LENGTH (str + i_byte, len);
-	      i_byte += len;
 	    }
+	  c = STRING_CHAR_AND_LENGTH (str + i_byte, len);
+	  i_byte += len;
+
+
 	  /* Treat `-' as range character only if another character
 	     follows.  */
 	  if (i_byte + 1 < size_byte
-- 
2.8.0.rc3.226.g39d4020






  parent reply	other threads:[~2016-07-27 16:50 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-25 22:54 bug#24071: [PATCH] Refactor regex character class parsing in [:name:] Michal Nazarewicz
2016-07-26 14:46 ` Eli Zaretskii
2016-07-27 15:29   ` Michal Nazarewicz
2016-07-27 16:28     ` Eli Zaretskii
2016-07-27 18:30       ` Michal Nazarewicz
2016-07-27 16:50   ` bug#24071: [PATCH 1/7] New regex tests imported from glibc 2.21 Michal Nazarewicz
2016-07-27 16:50     ` bug#24071: [PATCH 2/7] Added driver for the regex tests Michal Nazarewicz
2016-07-27 16:50     ` bug#24071: [PATCH 3/7] Fix reading of regex-resources in regex-tests Michal Nazarewicz
2016-07-27 16:50     ` bug#24071: [PATCH 4/7] Don’t (require 'cl) Michal Nazarewicz
2016-07-27 16:50     ` bug#24071: [PATCH 5/7] Split regex glibc test cases into separet tests Michal Nazarewicz
2016-07-27 16:50     ` bug#24071: [PATCH 6/7] Remove dead opcodes in regex bytecode Michal Nazarewicz
2016-07-27 16:50     ` Michal Nazarewicz [this message]
2016-07-29  5:31   ` bug#24071: [PATCH] Refactor regex character class parsing in [:name:] Dima Kogan
2016-07-29  5:53     ` Eli Zaretskii
2016-07-29 13:07     ` Michal Nazarewicz
2016-08-02 16:06 ` Michal Nazarewicz
2016-08-02 16:46   ` Eli Zaretskii
2016-08-02 17:54     ` Michal Nazarewicz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

  List information: https://www.gnu.org/software/emacs/

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1469638247-20131-7-git-send-email-mina86@mina86.com \
    --to=mina86@mina86.com \
    --cc=24071@debbugs.gnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).