\input texinfo @c Notes to self regarding line handling: @c @c Empty lines are often significant before @end directives; avoid them. @c @c Empty lines before and after @example directives are significant in @c info output but not in TeX. Empty lines inside @example directives @c are significant. @c Conventions for formatting examples: @c o If the example contains empty lines then put the surrounding empty @c lines inside the @example directives. Put them outside otherwise. @c o Use @group inside the example only if it shows indentation where @c the relation between lines inside is relevant. @c o Format line number columns like this: @c 1: foo @c 2: bar @c ^ one space @c ^^ two columns, right alignment @c o Check line lengths in TeX output; they can typically be no longer @c than 70 chars, 60 if the paragraph is indented. @comment TBD: Document the finer details of statement anchoring? @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @comment %**start of header (This is for running Texinfo on a region) @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @comment How to make the various output formats: @comment (Thanks to Robert Chassell for supplying this information.) @comment Note that Texinfo 4.7 (or later) is needed. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @ignore In each of the following pairs of commands, the first generates a version with cross references pointing to the GNU Emacs manuals, the second with them pointing to the XEmacs manuals. ## Info output makeinfo cc-mode.texi makeinfo -DXEMACS cc-mode.texi ## DVI output ## You may need to set up the environment variable TEXINPUTS so ## that tex can find the file texinfo.tex - See the tex ## manpage. texi2dvi cc-mode.texi texi2dvi -t "@set XEMACS " cc-mode.texi ## HTML output. (The --no-split parameter is optional) makeinfo --html --no-split cc-mode.texi makeinfo --html --no-split -DXEMACS cc-mode.texi ## Plain text output makeinfo --fill-column=70 --no-split --paragraph-indent=0 \ --no-headers --output=cc-mode.txt cc-mode.texi makeinfo --fill-column=70 --no-split --paragraph-indent=0 \ --no-headers --output=cc-mode.txt -DXEMACS cc-mode.texi ## DocBook output makeinfo --docbook --no-split --paragraph-indent=0 \ cc-mode.texi makeinfo --docbook --no-split --paragraph-indent=0 \ -DXEMACS cc-mode.texi ## XML output makeinfo --xml --no-split --paragraph-indent=0 \ cc-mode.texi makeinfo --xml --no-split --paragraph-indent=0 \ -DXEMACS cc-mode.texi #### (You must be in the same directory as the viewed file.) ## View DVI output xdvi cc-mode.dvi & ## View HTML output mozilla cc-mode.html @end ignore @comment No overfull hbox marks in the dvi file. @finalout @setfilename ../../info/ccmode.info @settitle CC Mode Manual @include docstyle.texi @footnotestyle end @c The following four macros generate the filenames and titles of the @c main (X)Emacs manual and the Elisp/Lispref manual. Leave the @c Texinfo variable 'XEMACS' unset to generate a GNU Emacs version, set it @c to generate an XEmacs version, e.g., with @c "makeinfo -DXEMACS cc-mode.texi". @ifset XEMACS @macro emacsman xemacs @end macro @macro emacsmantitle XEmacs User's Manual @end macro @macro lispref lispref @end macro @macro lispreftitle XEmacs Lisp Reference Manual @end macro @end ifset @ifclear XEMACS @macro emacsman emacs @end macro @macro emacsmantitle GNU Emacs Manual @end macro @macro lispref elisp @end macro @macro lispreftitle GNU Emacs Lisp Reference Manual @end macro @end ifclear @macro ccmode CC Mode @end macro @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @comment @setchapternewpage odd !! we don't want blank pages !! @comment %**end of header (This is for running Texinfo on a region) @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @comment @comment Texinfo manual for CC Mode @comment Generated from the original README file by Krishna Padmasola @comment @comment @comment Authors: @comment Barry A. Warsaw @comment Martin Stjernholm @comment Alan Mackenzie @comment @comment Maintained by Martin Stjernholm and Alan Mackenzie @comment @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @comment Define an index for syntactic symbols. @c Version for Texinfo <= 4.x @ifclear txicommandconditionals @ifnottex @c In texi2dvi, the @defindex would create an empty cc-mode.ss @c For Info, unlike tex, @syncodeindex needs a matching @defindex. @defindex ss @end ifnottex @end ifclear @c Version for Texinfo >= 5.x @ifset txicommandconditionals @defindex ss @end ifset @comment Combine key, syntactic symbol and concept indices into one. @syncodeindex ss cp @syncodeindex ky cp @copying This manual is for CC Mode in Emacs. Copyright @copyright{} 1995--2023 Free Software Foundation, Inc. @quotation Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, with the Front-Cover Texts being ``A GNU Manual'', and with the Back-Cover Texts as in (a) below. A copy of the license is included in the section entitled ``GNU Free Documentation License''. (a) The FSF's Back-Cover Text is: ``You have the freedom to copy and modify this GNU manual.'' @end quotation @end copying @comment Info directory entry for use by install-info. The indentation @comment here is by request from the FSF folks. @dircategory Emacs editing modes @direntry * CC Mode: (ccmode). Emacs mode for editing C, C++, Objective-C, Java, Pike, AWK, and CORBA IDL code. @end direntry @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @comment TeX title page @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @titlepage @sp 10 @center @titlefont{CC Mode 5.35} @sp 2 @center A GNU Emacs mode for editing C and C-like languages @sp 2 @center Barry A. Warsaw, Martin Stjernholm, Alan Mackenzie @page @vskip 0pt plus 1filll @insertcopying This manual was generated from cc-mode.texi, which is distributed with Emacs, or can be downloaded from @url{https://savannah.gnu.org/projects/emacs/}. @end titlepage @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @comment The Top node contains the master menu for the Info file. @comment This appears only in the Info file, not the printed manual. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @summarycontents @contents @ifnottex @node Top @top @ccmode{} @ccmode{} is a GNU Emacs mode for editing files containing C, C++, Objective-C, Java, CORBA IDL (and the variants PSDL and CIDL), Pike and AWK code. It provides syntax-based indentation, font locking, and has several handy commands and some minor modes to make the editing easier. It does not provide tools to look up and navigate between functions, classes, etc.; there are other packages for that. @insertcopying @end ifnottex @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @menu * Introduction:: * Overview:: * Getting Started:: * Commands:: * Font Locking:: * Config Basics:: * Custom Filling and Breaking:: * Custom Auto-newlines:: * Clean-ups:: * Indentation Engine Basics:: * Customizing Indentation:: * Custom Macros:: * Odds and Ends:: * Sample Init File:: * Performance Issues:: * Limitations and Known Bugs:: * FAQ:: * Updating CC Mode:: * Mailing Lists and Bug Reports:: * GNU Free Documentation License:: * Command and Function Index:: * Variable Index:: * Concept and Key Index:: @detailmenu --- The Detailed Node Listing --- Commands * Indentation Commands:: * Comment Commands:: * Movement Commands:: * Filling and Breaking:: * Minor Modes:: * Electric Keys:: * Auto-newlines:: * Hungry WS Deletion:: * Subword Movement:: * Other Commands:: Font Locking * Font Locking Preliminaries:: * Faces:: * Doc Comments:: * Wrong Comment Style:: * Misc Font Locking:: * AWK Mode Font Locking:: Configuration Basics * CC Hooks:: * Style Variables:: * Styles:: Styles * Built-in Styles:: * Choosing a Style:: * Adding Styles:: * Guessing the Style:: * File Styles:: Customizing Auto-newlines * Hanging Braces:: * Hanging Colons:: * Hanging Semicolons and Commas:: Hanging Braces * Custom Braces:: Indentation Engine Basics * Syntactic Analysis:: * Syntactic Symbols:: * Indentation Calculation:: Syntactic Symbols * Function Symbols:: * Class Symbols:: * Conditional Construct Symbols:: * Switch Statement Symbols:: * Brace List Symbols:: * External Scope Symbols:: * Paren List Symbols:: * Literal Symbols:: * Multiline Macro Symbols:: * Objective-C Method Symbols:: * Java Symbols:: * Constraint Symbols:: * Statement Block Symbols:: * K&R Symbols:: Customizing Indentation * c-offsets-alist:: * Interactive Customization:: * Line-Up Functions:: * Custom Line-Up:: * Other Indentation:: Line-Up Functions * Brace/Paren Line-Up:: * List Line-Up:: * Operator Line-Up:: * Comment Line-Up:: * Misc Line-Up:: Custom Macros * Macro Backslashes:: * Macros with ;:: * Noise Macros:: * Indenting Directives:: @end detailmenu @end menu @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Introduction @chapter Introduction @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @cindex BOCM @cindex history @cindex @file{awk-mode.el} @cindex @file{c-mode.el} @cindex @file{c++-mode.el} Welcome to @ccmode{}, a GNU Emacs mode for editing files containing C, C++, Objective-C, Java, CORBA IDL (and the variants CORBA PSDL and CIDL), Pike and AWK code. This incarnation of the mode is descended from @file{c-mode.el} (also called ``Boring Old C Mode'' or BOCM @t{:-)}, @file{c++-mode.el} version 2, which Barry Warsaw had been maintaining since 1992, and @file{awk-mode.el}, a long neglected mode in the (X)Emacs base. Late in 1997, Martin Stjernholm joined Barry on the @ccmode{} Maintainers Team, and implemented the Pike support. In 2000 Martin took over as the sole maintainer. In 2001 Alan Mackenzie joined the team, implementing AWK support in version 5.30. @ccmode{} did not originally contain the font lock support for its languages; that was added in version 5.30. This manual describes @ccmode{} @comment The following line must appear on its own, so that the version 5.35. @comment Release.py script can update the version number automatically @ccmode{} supports the editing of C, C++, Objective-C, Java, CORBA's Interface Definition Language, Pike@footnote{A C-like scripting language with its roots in the LPC language used in some MUD engines. See @uref{https://pike.lysator.liu.se/}.} and AWK files. In this way, you can easily set up consistent font locking and coding styles for use in editing all of these languages, although AWK is not yet as uniformly integrated as the other languages. @findex c-mode @findex c++-mode @findex objc-mode @findex java-mode @findex idl-mode @findex pike-mode @findex awk-mode Note that the name of this package is ``@ccmode{}'', but there is no top level @code{cc-mode} entry point. All of the variables, commands, and functions in @ccmode{} are prefixed with @code{c-@var{thing}}, and @code{c-mode}, @code{c++-mode}, @code{objc-mode}, @code{java-mode}, @code{idl-mode}, @code{pike-mode}, and @code{awk-mode} entry points are provided. This package is intended to be a replacement for @file{c-mode.el}, @file{c++-mode.el} and @file{awk-mode.el}. A special word of thanks goes to Krishna Padmasola for his work in converting the original @file{README} file to Texinfo format. I'd also like to thank all the @ccmode{} victims who help enormously during the early beta stages of @ccmode{}'s development. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Overview @comment node-name, next, previous, up@cindex organization of the manual @chapter Overview of the Manual @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @noindent The manual starts with several introductory chapters (including this one). @noindent The next chunk of the manual describes the day to day @emph{use} of @ccmode{} (as contrasted with how to customize it). @itemize @bullet @item The chapter ``Commands'' describes in detail how to use (nearly) all of @ccmode{}'s features. There are extensive cross-references from here to the corresponding sections later in the manual which tell you how to customize these features. @item ``Font Locking'' describes how ``syntax highlighting'' is applied to your buffers. It is mainly background information and can be skipped over at a first reading. @end itemize @noindent The next chunk of the manual describes how to @emph{customize} @ccmode{}. Typically, an overview of a topic is given at the chapter level, then the sections and subsections describe the material in increasing detail. @itemize @bullet @item The chapter ``Configuration Basics'' tells you @emph{how} to write customizations: whether in hooks, in styles, in both, or in neither, depending on your needs. It describes the @ccmode{} style system and lists the standard styles that @ccmode{} supplies. @item The next few chapters describe in detail how to customize the various features of @ccmode{}. @item Finally, there is a sample @file{.emacs} fragment, which might help you in creating your own customization. @end itemize @noindent The manual ends with ``this and that'', things that don't fit cleanly into any of the previous chunks. @itemize @bullet @item Two chapters discuss the performance of @ccmode{} and known bugs/limitations. @item The FAQ contains a list of common problems and questions. @item The next two chapters tell you how to get in touch with the @ccmode{} project: whether for updating @ccmode{} or submitting bug reports. @end itemize @noindent Finally, there are the customary indices. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Getting Started @chapter Getting Started @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! If you got this version of @ccmode{} with Emacs or XEmacs, it should work just fine right out of the box. Note however that you might not have the latest @ccmode{} release and might want to upgrade your copy (see below). You should probably start by skimming through the entire Commands chapter (@pxref{Commands}) to get an overview of @ccmode{}'s capabilities. After trying out some commands, you may dislike some aspects of @ccmode{}'s default configuration. Here is an outline of how to change some of the settings that newcomers to @ccmode{} most often want to change: @table @asis @item c-basic-offset This Lisp variable holds an integer, the number of columns @ccmode{} indents nested code. To set this value to 6, customize @code{c-basic-offset} or put this into your @file{.emacs}: @example (setq c-basic-offset 6) @end example @item The (indentation) style The basic ``shape'' of indentation created by @ccmode{}---by default, this is @code{gnu} style (except for Java and AWK buffers). A list of the available styles and their descriptions can be found in @ref{Built-in Styles}. A complete specification of the @ccmode{} style system, including how to create your own style, can be found in the chapter @ref{Styles}. To set your style to @code{linux}, either customize @code{c-default-style} or put this into your @file{.emacs}: @example (setq c-default-style '((java-mode . "java") (awk-mode . "awk") (other . "linux"))) @end example @item Electric Indentation Normally, when you type ``punctuation'' characters such as @samp{;} or @samp{@{}, @ccmode{} instantly reindents the current line. This can be disconcerting until you get used to it. To disable @dfn{electric indentation} in the current buffer, type @kbd{C-c C-l}. Type the same thing to enable it again. To have electric indentation disabled by default, put the following into your @file{.emacs} file@footnote{There is no ``easy customization'' facility for making this change.}: @example (setq-default c-electric-flag nil) @end example @noindent Details of this and other similar ``Minor Modes'' appear in the section @ref{Minor Modes}. @item Making the @key{RET} key indent the new line The standard Emacs binding for @key{RET} just adds a new line. If you want it to reindent the new line as well, rebind the key. Note that the action of rebinding would fail if the pertinent keymap didn't yet exist---we thus need to delay the action until after @ccmode{} has been loaded. Put the following code into your @file{.emacs}: @example (defun my-make-CR-do-indent () (define-key c-mode-base-map "\C-m" 'c-context-line-break)) (add-hook 'c-initialization-hook 'my-make-CR-do-indent) @end example @noindent This example demonstrates the use of a very powerful @ccmode{} (and Emacs) facility, the hook. The use of @ccmode{}'s hooks is described in @ref{CC Hooks}. @end table All these settings should occur in your @file{.emacs} @emph{before} any @ccmode{} buffers get loaded---in particular, before any call of @code{desktop-read}. As you get to know the mode better, you may want to make more ambitious changes to your configuration. For this, you should start reading the chapter @ref{Config Basics}. If you are upgrading an existing @ccmode{} installation, please see the @file{README} file for installation details. In particular, if you are going to be editing AWK files, @file{README} describes how to configure your (X)Emacs so that @ccmode{} will supersede the obsolete @code{awk-mode.el} which might have been supplied with your (X)Emacs. @ccmode{} might not work with older versions of Emacs or XEmacs. See the @ccmode{} release notes at @uref{https://cc-mode.sourceforge.net} for the latest information on Emacs version and package compatibility (@pxref{Updating CC Mode}). @deffn Command c-version @findex version @r{(c-)} You can find out what version of @ccmode{} you are using by visiting a C file and entering @kbd{M-x c-version @key{RET}}. You should see this message in the echo area: @example Using CC Mode version 5.XX @end example @noindent where @samp{XX} is the minor release number. @end deffn @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Commands @chapter Commands @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! This chapter specifies all of CC Mode's commands, and thus contains nearly everything you need to know to @emph{use} @ccmode{} (as contrasted with configuring it). @dfn{Commands} here means both control key sequences and @dfn{electric keys}, these being characters such as @samp{;} which, as well as inserting themselves into the buffer, also do other things. You might well want to review @ifset XEMACS @ref{Lists,,,@emacsman{}, @emacsmantitle{}}, @end ifset @ifclear XEMACS @ref{Moving by Parens,,,@emacsman{}, @emacsmantitle{}}, @end ifclear which describes commands for moving around brace and parenthesis structures. @menu * Indentation Commands:: * Comment Commands:: * Movement Commands:: * Filling and Breaking:: * Minor Modes:: * Electric Keys:: * Auto-newlines:: * Hungry WS Deletion:: * Subword Movement:: * Other Commands:: @end menu @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Indentation Commands @comment node-name, next, previous,up @section Indentation Commands @cindex indentation @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! The following commands reindent C constructs. Note that when you change your coding style, either interactively or through some other means, your file does @emph{not} automatically get reindented. You will need to execute one of the following commands to see the effects of your changes. @cindex GNU indent program Also, variables like @code{c-hanging-*} and @code{c-cleanup-list} (@pxref{Custom Auto-newlines}) only affect how on-the-fly code is formatted. Changing the ``hanginess'' of a brace and then reindenting, will not move the brace to a different line. For this, you're better off getting an external program like GNU @code{indent}, which will rearrange brace location, amongst other things. Preprocessor directives are handled as syntactic whitespace from other code, i.e., they can be interspersed anywhere without affecting the indentation of the surrounding code, just like comments. The code inside macro definitions is, by default, still analyzed syntactically so that you get relative indentation there just as you'd get if the same code was outside a macro. However, since there is no hint about the syntactic context, i.e., whether the macro expands to an expression, to some statements, or perhaps to whole functions, the syntactic recognition can be wrong. @ccmode{} manages to figure it out correctly most of the time, though. Some macros, when invoked, ``have their own semicolon''. To get the next line indented correctly, rather than as a continuation line, @xref{Macros with ;}. Reindenting large sections of code can take a long time. When @ccmode{} reindents a region of code, it is essentially equivalent to hitting @key{TAB} on every line of the region. These commands indent code: @table @asis @item @kbd{@key{TAB}} (@code{c-indent-command}) @kindex TAB @findex c-indent-command @findex indent-command @r{(c-)} This command indents the current line. That is all you need to know about it for normal use. @code{c-indent-command} does different things, depending on the setting of @code{c-syntactic-indentation} (@pxref{Indentation Engine Basics}): @itemize @bullet @item When it's non-@code{nil} (which it normally is), the command indents the line according to its syntactic context. With a prefix argument (@kbd{C-u @key{TAB}}), it will re-indent the entire expression@footnote{this is only useful for a line starting with a comment opener or an opening brace, parenthesis, or string quote.} that begins at the line's left margin. @item When it's @code{nil}, the command indents the line by an extra @code{c-basic-offset} columns. A prefix argument acts as a multiplier. A bare prefix (@kbd{C-u @key{TAB}}) is equivalent to @minus{}1, removing @code{c-basic-offset} columns from the indentation. @end itemize The precise behavior is modified by several variables: With @code{c-tab-always-indent}, you can make @key{TAB} insert whitespace in some circumstances---@code{c-insert-tab-function} then defines precisely what sort of ``whitespace'' this will be. Set the standard Emacs variable @code{indent-tabs-mode} to @code{t} if you want real @samp{tab} characters to be used in the indentation, to @code{nil} if you want only spaces. @xref{Just Spaces,,,@emacsman{}, @emacsmantitle{}}. @defopt c-tab-always-indent @vindex tab-always-indent @r{(c-)} @cindex literal This variable modifies how @key{TAB} operates. @itemize @bullet @item When it is @code{t} (the default), @key{TAB} simply indents the current line. @item When it is @code{nil}, @key{TAB} (re)indents the line only if point is to the left of the first non-whitespace character on the line. Otherwise it inserts some whitespace (a tab or an equivalent number of spaces; see below) at point. @item With some other value, the line is reindented. Additionally, if point is within a string or comment, some whitespace is inserted. @end itemize @end defopt @defopt c-insert-tab-function @vindex insert-tab-function @r{(c-)} @findex tab-to-tab-stop When ``some whitespace'' is inserted as described above, what actually happens is that the function stored in @code{c-insert-tab-function} is called. Normally, this is @code{insert-tab}, which inserts a real tab character or the equivalent number of spaces (depending on @code{indent-tabs-mode}). Some people, however, set @code{c-insert-tab-function} to @code{tab-to-tab-stop} so as to get hard tab stops when indenting. @end defopt @end table @noindent The kind of indentation the next five commands do depends on the setting of @code{c-syntactic-indentation} (@pxref{Indentation Engine Basics}): @itemize @bullet @item when it is non-@code{nil} (the default), the commands indent lines according to their syntactic context; @item when it is @code{nil}, they just indent each line the same amount as the previous non-blank line. The commands that indent a region aren't very useful in this case. @end itemize @table @asis @item @kbd{C-M-q} (@code{c-indent-exp}) @kindex C-M-q @findex c-indent-exp @findex indent-exp @r{(c-)} Indents an entire balanced brace or parenthesis expression. Note that point must be on the opening brace or parenthesis of the expression you want to indent. @item @kbd{C-c C-q} (@code{c-indent-defun}) @kindex C-c C-q @findex c-indent-defun @findex indent-defun @r{(c-)} Indents the entire top-level function, class or macro definition encompassing point. It leaves point unchanged. This function can't be used to reindent a nested brace construct, such as a nested class or function, or a Java method. The top-level construct being reindented must be complete, i.e., it must have both a beginning brace and an ending brace. @item @kbd{C-M-\} (@code{indent-region}) @kindex C-M-\ @findex indent-region Indents an arbitrary region of code. This is a standard Emacs command, tailored for C code in a @ccmode{} buffer. Note, of course, that point and mark must delineate the region you want to indent. @item @kbd{C-M-h} (@code{c-mark-function}) @kindex C-M-h @findex c-mark-function @findex mark-function @r{(c-)} While not strictly an indentation command, this is useful for marking the current top-level function or class definition as the current region. As with @code{c-indent-defun}, this command operates on top-level constructs, and can't be used to mark say, a Java method. @end table These variables are also useful when indenting code: @defopt indent-tabs-mode This is a standard Emacs variable that controls how line indentation is composed. When it's non-@code{nil}, tabs can be used in a line's indentation, otherwise only spaces are used. @end defopt @defopt c-progress-interval @vindex progress-interval @r{(c-)} When indenting large regions of code, this variable controls how often a progress message is displayed. Set this variable to @code{nil} to inhibit the progress messages, or set it to an integer which is how often (in seconds) progress messages are to be displayed. @end defopt @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Comment Commands @section Comment Commands @cindex comments (insertion of) @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! When the commands in this section add comment delimiters, they use either line comments or block comments depending on the setting of the comment style (@pxref{Minor Modes}). @table @asis @item @kbd{C-c C-c} (@code{comment-region}) @kindex C-c C-c @findex comment-region This command comments out the lines that start in the region. With a negative argument, it does the opposite: it deletes the comment delimiters from these lines. @xref{Multi-Line Comments,,, emacs, GNU Emacs Manual}, for fuller details. @code{comment-region} isn't actually part of @ccmode{}; it is given a @ccmode{} binding for convenience. @item @kbd{M-;} (@code{comment-dwim} or @code{indent-for-comment} @footnote{The name of this command varies between (X)Emacs versions.}) @kindex M-; @findex comment-dwim @findex indent-for-comment Insert a comment at the end of the current line, if none is there already. Then reindent the comment according to @code{comment-column} @ifclear XEMACS (@pxref{Options for Comments,,, emacs, GNU Emacs Manual}) @end ifclear @ifset XEMACS (@pxref{Comments,,, xemacs, XEmacs User's Manual}) @end ifset and the variables below. Finally, position the point after the comment starter. @kbd{C-u M-;} kills any comment on the current line, together with any whitespace before it. This is a standard Emacs command, but @ccmode{} enhances it a bit with two variables: @defopt c-indent-comment-alist @vindex indent-comment-alist @r{(c-)} @vindex comment-column This style variable allows you to vary the column that @kbd{M-;} puts the comment at, depending on what sort of code is on the line, and possibly the indentation of any similar comment on the preceding line. It is an association list that maps different types of lines to actions describing how they should be handled. If a certain line type isn't present on the list then the line is indented to the column specified by @code{comment-column}. See the documentation string for a full description of this variable (use @kbd{C-h v c-indent-comment-alist}). @end defopt @defopt c-indent-comments-syntactically-p @vindex indent-comments-syntactically-p @r{(c-)} Normally, when this style variable is @code{nil}, @kbd{M-;} will indent comment-only lines according to @code{c-indent-comment-alist}, just as it does with lines where other code precede the comments. However, if you want it to act just like @key{TAB} for comment-only lines you can get that by setting @code{c-indent-comments-syntactically-p} to non-@code{nil}. If @code{c-indent-comments-syntactically-p} is non-@code{nil} then @code{c-indent-comment-alist} won't be consulted at all for comment-only lines. @end defopt @end table @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Movement Commands @section Movement Commands @cindex movement @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @ccmode{} contains some useful commands for moving around in C code. @table @asis @item @kbd{C-M-a} (@code{c-beginning-of-defun}) @itemx @kbd{C-M-e} (@code{c-end-of-defun}) @findex c-beginning-of-defun @findex c-end-of-defun @vindex c-defun-tactic @vindex defun-tactic @r{(c-)} Move to the beginning or end of the current or next function. Other constructs (such as structs or classes) which have a brace block also count as ``functions'' here. To move over several functions, you can give these commands a repeat count. The start of a function is at its header. The end of the function is after its closing brace, or after the semicolon of a construct (such as a @code{struct}) which doesn't end at the brace. These two commands try to leave point at the beginning of a line near the actual start or end of the function. This occasionally causes point not to move at all. By default, these commands will recognize functions contained within a @dfn{declaration scope} such as a C++ @code{class} or @code{namespace} construct, should the point start inside it. If @ccmode fails to find function beginnings or ends inside the current declaration scope, it will search the enclosing scopes. If you want @ccmode to recognize functions only at the top level@footnote{this was @ccmode{}'s behavior prior to version 5.32.}, set @code{c-defun-tactic} to @code{t}. These functions are analogous to the Emacs built-in commands @code{beginning-of-defun} and @code{end-of-defun}, except they eliminate the constraint that the top-level opening brace of the defun must be in column zero. See @ref{Defuns,,,@emacsman{}, @emacsmantitle{}}, for more information. @item @kbd{C-M-a} (AWK Mode) (@code{c-awk-beginning-of-defun}) @itemx @kbd{C-M-e} (AWK Mode) (@code{c-awk-end-of-defun}) @kindex C-M-a @r{(AWK Mode)} @kindex C-M-e @r{(AWK Mode)} @findex c-awk-beginning-of-defun @findex awk-beginning-of-defun @r{(c-)} @findex c-awk-end-of-defun @findex awk-end-of-defun @r{(c-)} Move to the beginning or end of the current or next AWK defun. These commands can take prefix-arguments, their functionality being entirely equivalent to @code{beginning-of-defun} and @code{end-of-defun}. AWK Mode @dfn{defuns} are either pattern/action pairs (either of which might be implicit) or user defined functions. Having the @samp{@{} and @samp{@}} (if there are any) in column zero, as is suggested for some modes, is neither necessary nor helpful in AWK mode. @item @kbd{M-a} (@code{c-beginning-of-statement}) @itemx @kbd{M-e} (@code{c-end-of-statement}) @kindex M-a @kindex M-e @findex c-beginning-of-statement @findex c-end-of-statement @findex beginning-of-statement @r{(c-)} @findex end-of-statement @r{(c-)} Move to the beginning or end of the innermost C statement. If point is already there, move to the next beginning or end of a statement, even if that means moving into a block. (Use @kbd{C-M-b} or @kbd{C-M-f} to move over a balanced block.) A prefix argument @var{n} means move over @var{n} statements. If point is within or next to a comment or a string which spans more than one line, these commands move by sentences instead of statements. When called from a program, these functions take three optional arguments: the repetition count, a buffer position limit which is the farthest back to search for the syntactic context, and a flag saying whether to do sentence motion in or near comments and multiline strings. @item @kbd{C-c C-u} (@code{c-up-conditional}) @kindex C-c C-u @findex c-up-conditional @findex up-conditional @r{(c-)} Move back to the containing preprocessor conditional, leaving the mark behind. A prefix argument acts as a repeat count. With a negative argument, move forward to the end of the containing preprocessor conditional. @samp{#elif} is treated like @samp{#else} followed by @samp{#if}, so the function stops at them when going backward, but not when going forward. This key sequence is not bound in AWK Mode, which doesn't have preprocessor statements. @item @kbd{M-x c-up-conditional-with-else} @findex c-up-conditional-with-else @findex up-conditional-with-else @r{(c-)} A variety of @code{c-up-conditional} that also stops at @samp{#else} lines. Normally those lines are ignored. @item @kbd{M-x c-down-conditional} @findex c-down-conditional @findex down-conditional @r{(c-)} Move forward into the next nested preprocessor conditional, leaving the mark behind. A prefix argument acts as a repeat count. With a negative argument, move backward into the previous nested preprocessor conditional. @samp{#elif} is treated like @samp{#else} followed by @samp{#if}, so the function stops at them when going forward, but not when going backward. @item @kbd{M-x c-down-conditional-with-else} @findex c-down-conditional-with-else @findex down-conditional-with-else @r{(c-)} A variety of @code{c-down-conditional} that also stops at @samp{#else} lines. Normally those lines are ignored. @item @kbd{C-c C-p} (@code{c-backward-conditional}) @itemx @kbd{C-c C-n} (@code{c-forward-conditional}) @kindex C-c C-p @kindex C-c C-n @findex c-backward-conditional @findex c-forward-conditional @findex backward-conditional @r{(c-)} @findex forward-conditional @r{(c-)} Move backward or forward across a preprocessor conditional, leaving the mark behind. A prefix argument acts as a repeat count. With a negative argument, move in the opposite direction. These key sequences are not bound in AWK Mode, which doesn't have preprocessor statements. @item @kbd{M-x c-backward-into-nomenclature} @findex c-backward-into-nomenclature @findex backward-into-nomenclature @r{(c-)} @findex forward-into-nomenclature @r{(c-)} A popular programming style, especially for object-oriented languages such as C++ is to write symbols in a mixed case format, where the first letter of each word is capitalized, and not separated by underscores. E.g., @samp{SymbolsWithMixedCaseAndNoUnderlines}. These commands move backward or forward to the beginning of the next capitalized word. With prefix argument @var{n}, move @var{n} times. If @var{n} is negative, move in the opposite direction. Note that these two commands have been superseded by @code{subword-mode}, which you should use instead. @xref{Subword Movement}. They might be removed from a future release of @ccmode{}. @end table @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Filling and Breaking @comment node-name, next, previous, up @section Filling and Line Breaking Commands @cindex text filling @cindex line breaking @cindex comment handling @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Since there's a lot of normal text in comments and string literals, @ccmode{} provides features to edit these like in text mode. The goal is to do it seamlessly, i.e., you can use auto fill mode, sentence and paragraph movement, paragraph filling, adaptive filling etc.@: wherever there's a piece of normal text without having to think much about it. @ccmode{} keeps the indentation, fixes suitable comment line prefixes, and so on. You can configure the exact way comments get filled and broken, and where Emacs does auto-filling (@pxref{Custom Filling and Breaking}). Typically, the style system (@pxref{Styles}) will have set this up for you, so you probably won't have to bother. @findex auto-fill-mode @cindex Auto Fill mode @cindex paragraph filling Line breaks are by default handled (almost) the same regardless of whether they are made by auto fill mode (@pxref{Auto Fill,,,@emacsman{}, @emacsmantitle{}}), by paragraph filling (e.g., with @kbd{M-q}), or explicitly with @kbd{M-j} or similar methods. In string literals, the new line gets the same indentation as the previous nonempty line.@footnote{You can change this default by setting the @code{string} syntactic symbol (@pxref{Syntactic Symbols} and @pxref{Customizing Indentation})}. @table @asis @item @kbd{M-q} (@code{c-fill-paragraph}) @kindex M-q @findex c-fill-paragraph @findex fill-paragraph @r{(c-)} @cindex Javadoc markup @cindex Pike autodoc markup This command fills multiline string literals and both block and line style comments. In Java buffers, the Javadoc markup words are recognized as paragraph starters. The line oriented Pike autodoc markup words are recognized in the same way in Pike mode. The formatting of the starters (@code{/*}) and enders (@code{*/}) of block comments are kept as they were before the filling. I.e., if either the starter or ender were on a line of its own, then it stays on its own line; conversely, if the delimiter has comment text on its line, it keeps at least one word of that text with it on the line. This command is the replacement for @code{fill-paragraph} in @ccmode{} buffers. @item @kbd{M-j} (@code{c-indent-new-comment-line}) @kindex M-j @findex c-indent-new-comment-line @findex indent-new-comment-line @r{(c-)} This breaks the current line at point and indents the new line. If point was in a comment, the new line gets the proper comment line prefix. If point was inside a macro, a backslash is inserted before the line break. It is the replacement for @code{indent-new-comment-line}. @item @kbd{M-x c-context-line-break} @findex c-context-line-break @findex context-line-break @r{(c-)} Insert a line break suitable to the context: If the point is inside a comment, the new line gets the suitable indentation and comment line prefix like @code{c-indent-new-comment-line}. In normal code it's indented like @code{newline-and-indent} would do. In macros it acts like @code{newline-and-indent} but additionally inserts and optionally aligns the line ending backslash so that the macro remains unbroken. @xref{Custom Macros}, for details about the backslash alignment. In a string, a backslash is inserted only if the string is within a macro@footnote{In GCC, unescaped line breaks within strings are valid.}. This function is not bound to a key by default, but it's intended to be used on the @kbd{RET} key. If you like the behavior of @code{newline-and-indent} on @kbd{RET}, you should consider switching to this function. @xref{Sample Init File}. @item @kbd{M-x c-context-open-line} @findex c-context-open-line @findex context-open-line @r{(c-)} This is to @kbd{C-o} (@kbd{M-x open-line}) as @code{c-context-line-break} is to @kbd{RET}. I.e., it works just like @code{c-context-line-break} but leaves the point before the inserted line break. @end table @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Minor Modes @section Minor Modes @cindex Minor Modes @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @ccmode{} contains several minor-mode-like features that you might find useful while writing new code or editing old code: @table @asis @item comment style This specifies whether comment commands (such as @kbd{M-;}) insert block comments or line comments@footnote{You can emphasize non-default style comments in your code by giving their delimiters @code{font-lock-warning-face}. @xref{Wrong Comment Style}.}. @item electric mode When this is enabled, certain visible characters cause reformatting as they are typed. This is normally helpful, but can be a nuisance when editing chaotically formatted code. It can also be disconcerting, especially for users who are new to @ccmode{}. @item auto-newline mode This automatically inserts newlines where you'd probably want to type them yourself, e.g., after typing @samp{@}}s. Its action is suppressed when electric mode is disabled. @item hungry-delete mode This lets you delete a contiguous block of whitespace with a single key: for example, the newline and indentation just inserted by auto-newline when you want to back up and write a comment after the last statement. @item subword mode This mode makes basic word movement commands like @kbd{M-f} (@code{forward-word}) and @kbd{M-b} (@code{backward-word}) treat the parts of sillycapsed symbols as different words. E.g., @samp{NSGraphicsContext} is treated as three words @samp{NS}, @samp{Graphics}, and @samp{Context}. @item syntactic-indentation mode When this is enabled (which it normally is), indentation commands such as @kbd{C-j} indent lines of code according to their syntactic structure. Otherwise, a line is simply indented to the same level as the previous one and @kbd{@key{TAB}} adjusts the indentation in steps of @code{c-basic-offset}. @end table Full details on how these minor modes work are at @ref{Electric Keys}, @ref{Auto-newlines}, @ref{Hungry WS Deletion}, @ref{Subword Movement}, and @ref{Indentation Engine Basics}. You can toggle each of these minor modes on and off, and you can configure @ccmode{} so that it starts up with your favorite combination of them (@pxref{Sample Init File}). By default, when you initialize a buffer, the comment style is set to the default for the major mode, electric mode and syntactic-indentation mode are enabled, but the other three modes are disabled. @ccmode{} displays the current state of the first five of these minor modes on the mode line by appending characters to the major mode's name: @samp{/} or @samp{*} to indicate the comment style (respectively line or block), and one letter for each of the other minor modes which is enabled - @samp{l} for electric mode, @samp{a} for auto-newline mode, @samp{h} for hungry delete mode, and @samp{w} for subword mode. If the comment style was block and all the other modes were enabled, you'd see @samp{C/*lahw}@footnote{The @samp{C} would be replaced with the name of the language in question for the other languages @ccmode{} supports.}. Here are the commands to toggle these modes: @table @asis @item @kbd{C-c C-k} (@code{c-toggle-comment-style}) @kindex C-c C-k @findex c-toggle-comment-style @findex toggle-comment-style @r{(c-)} Toggle the comment style between line style and block style. In modes (such as AWK Mode) which only have one of these styles, this function does nothing. @item @kbd{C-c C-l} (@code{c-toggle-electric-state}) @kindex C-c C-l @findex c-toggle-electric-state @findex toggle-electric-state @r{(c-)} Toggle electric minor mode. When the command turns the mode off, it also suppresses auto-newline mode. @item @kbd{C-c C-a} (@code{c-toggle-auto-newline}) @kindex C-c C-a @findex c-toggle-auto-newline @findex toggle-auto-newline @r{(c-)} Toggle auto-newline minor mode. When the command turns the mode on, it also enables electric minor mode. @item @kbd{M-x c-toggle-hungry-state}@footnote{Prior to @ccmode{} 5.31, this command was bound to @kbd{C-c C-d}.} @findex c-toggle-hungry-state @findex toggle-hungry-state @r{(c-)} Toggle hungry-delete minor mode. @item @kbd{M-x c-toggle-auto-hungry-state}@footnote{Prior to @ccmode{} 5.31, this command was bound to @kbd{C-c C-t}.} @findex c-toggle-auto-hungry-state @findex toggle-auto-hungry-state @r{(c-)} Toggle both auto-newline and hungry delete minor modes. @item @kbd{C-c C-w} (@code{M-x subword-mode}) @kindex C-c C-w @findex subword-mode Toggle subword mode. @item @kbd{M-x c-toggle-syntactic-indentation} @findex c-toggle-syntactic-indentation @findex toggle-syntactic-indentation @r{(c-)} Toggle syntactic-indentation mode. @end table Common to all the toggle functions above is that if they are called programmatically, they take an optional numerical argument. For @code{c-toggle-comment style}, a positive value will select block comments, a negative value will select line comments. For the other functions, a positive value will turn on the minor mode (or both of them in the case of @code{c-toggle-auto-hungry-state}) and a negative value will turn it (or them) off. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Electric Keys @section Electric Keys and Keywords @cindex electric characters @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Most punctuation keys provide @dfn{electric} behavior: as well as inserting themselves they perform some other action, such as reindenting the line. This reindentation saves you from having to reindent a line manually after typing, say, a @samp{@}}. A few keywords, such as @code{else}, also trigger electric action. You can inhibit the electric behavior described here by disabling electric minor mode (@pxref{Minor Modes}). Common to all these keys is that they only behave electrically when used in normal code (as contrasted with getting typed in a string literal or comment). Those which cause re-indentation do so only when @code{c-syntactic-indentation} has a non-@code{nil} value (which it does by default). These keys and keywords are: @c ACM, 2004/8/24: c-electric-pound doesn't check c-s-i: this is more @c like a bug in the code than a bug in this document. It'll get @c fixed in the code sometime. @table @kbd @item # @kindex # @findex c-electric-pound @findex electric-pound @r{(c-)} @vindex c-electric-pound-behavior @vindex electric-pound-behavior @r{(c-)} Pound (bound to @code{c-electric-pound}) is electric when typed as the first non-whitespace character on a line and not within a macro definition. In this case, the variable @code{c-electric-pound-behavior} is consulted for the electric behavior. This variable takes a list value, although the only element currently defined is @code{alignleft}, which tells this command to force the @samp{#} character into column zero. This is useful for entering preprocessor macro definitions. Pound is not electric in AWK buffers, where @samp{#} starts a comment, and is bound to @code{self-insert-command} like any typical printable character. @c ACM, 2004/8/24: Change this (and the code) to do AWK comment @c reindentation. @item * @kindex * @itemx / @kindex / @findex c-electric-star @findex electric-star @r{(c-)} @findex c-electric-slash @findex electric-slash @r{(c-)} A star (bound to @code{c-electric-star}) or a slash (@code{c-electric-slash}) causes reindentation when you type it as the second component of a C style block comment opener (@samp{/*}) or a C++ line comment opener (@samp{//}) respectively, but only if the comment opener is the first thing on the line (i.e., there's only whitespace before it). Additionally, you can configure @ccmode{} so that typing a slash at the start of a line within a block comment will terminate the comment. You don't need to have electric minor mode enabled to get this behavior. @xref{Clean-ups}. In AWK mode, @samp{*} and @samp{/} do not delimit comments and are not electric. @item < @kindex < @itemx > @kindex > @findex c-electric-lt-gt @findex electric-lt-gt @r{(c-)} A less-than or greater-than sign (bound to @code{c-electric-lt-gt}) is electric in two circumstances: when it is an angle bracket in a C++ @samp{template} declaration (and similar constructs in other languages) and when it is the second of two @kbd{<} or @kbd{>} characters in a C++ style stream operator. In either case, the line is reindented. Angle brackets in C @samp{#include} directives are not electric. @item ( @kindex ( @itemx ) @kindex ) @findex c-electric-paren @findex electric-paren @r{(c-)} The normal parenthesis characters @samp{(} and @samp{)} (bound to @code{c-electric-paren}) reindent the current line. This is useful for getting the closing parenthesis of an argument list aligned automatically. You can also configure @ccmode{} to insert a space automatically between a function name and the @samp{(} you've just typed, and to remove it automatically after typing @samp{)}, should the argument list be empty. You don't need to have electric minor mode enabled to get these actions. @xref{Clean-ups}. @item @{ @kindex @{ @itemx @} @kindex @} @findex c-electric-brace @findex electric-brace @r{(c-)} Typing a brace (bound to @code{c-electric-brace}) reindents the current line. Also, one or more newlines might be inserted if auto-newline minor mode is enabled. @xref{Auto-newlines}. Additionally, you can configure @ccmode{} to compact excess whitespace inserted by auto-newline mode in certain circumstances. @xref{Clean-ups}. @item : @kindex : @findex c-electric-colon @findex electric-colon @r{(c-)} Typing a colon (bound to @code{c-electric-colon}) reindents the current line. Additionally, one or more newlines might be inserted if auto-newline minor mode is enabled. @xref{Auto-newlines}. If you type a second colon immediately after such an auto-newline, by default the whitespace between the two colons is removed, leaving a C++ scope operator. @xref{Clean-ups}. If you prefer, you can insert @samp{::} in a single operation, avoiding all these spurious reindentations, newlines, and clean-ups. @xref{Other Commands}. @item ; @kindex ; @itemx , @kindex , @findex c-electric-semi&comma @findex electric-semi&comma @r{(c-)} Typing a semicolon or comma (bound to @code{c-electric-semi&comma}) reindents the current line. Also, a newline might be inserted if auto-newline minor mode is enabled. @xref{Auto-newlines}. Additionally, you can configure @ccmode{} so that when auto-newline has inserted whitespace after a @samp{@}}, it will be removed again when you type a semicolon or comma just after it. @xref{Clean-ups}. @end table @deffn Command c-electric-continued-statement @findex electric-continued-statement @r{(c-)} Certain keywords are electric, causing reindentation when they are preceded only by whitespace on the line. The keywords are those that continue an earlier statement instead of starting a new one: @code{else}, @code{while}, @code{catch} (only in C++ and Java) and @code{finally} (only in Java). An example: @example @group for (i = 0; i < 17; i++) if (a[i]) res += a[i]->offset; else @end group @end example Here, the @code{else} should be indented like the preceding @code{if}, since it continues that statement. @ccmode{} will automatically reindent it after the @code{else} has been typed in full, since only then is it possible to decide whether it's a new statement or a continuation of the preceding @code{if}. @vindex abbrev-mode @findex abbrev-mode @cindex Abbrev mode @ccmode{} uses Abbrev mode (@pxref{Abbrevs,,,@emacsman{}, @emacsmantitle{}}) to accomplish this. It's therefore turned on by default in all language modes except IDL mode, since CORBA IDL doesn't have any statements. @end deffn @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Auto-newlines @section Auto-newline Insertion @cindex auto-newline @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! When you have @dfn{Auto-newline minor mode} enabled (@pxref{Minor Modes}), @ccmode{} inserts newlines for you automatically (in certain syntactic contexts) when you type a left or right brace, a colon, a semicolon, or a comma. Sometimes a newline appears before the character you type, sometimes after it, sometimes both. Auto-newline only triggers when the following conditions hold: @itemize @bullet @item Auto-newline minor mode is enabled, as evidenced by the indicator @samp{a} after the mode name on the modeline (e.g., @samp{C/a} or @samp{C/la}). @item The character was typed at the end of a line, or with only whitespace after it, and possibly a @samp{\} escaping the newline. @item The character is not on its own line already. (This applies only to insertion of a newline @emph{before} the character.) @item @cindex literal @cindex syntactic whitespace The character was not typed inside of a literal @footnote{A @dfn{literal} is defined as any comment, string, or preprocessor macro definition. These constructs are also known as @dfn{syntactic whitespace} since they are usually ignored when scanning C code.}. @item No numeric argument was supplied to the command (i.e., it was typed as normal, with no @kbd{C-u} prefix). @end itemize You can configure the precise circumstances in which newlines get inserted (@pxref{Custom Auto-newlines}). Typically, the style system (@pxref{Styles}) will have set this up for you, so you probably won't have to bother. Sometimes @ccmode{} inserts an auto-newline where you don't want one, such as after a @samp{@}} when you're about to type a @samp{;}. Hungry deletion can help here (@pxref{Hungry WS Deletion}), or you can activate an appropriate @dfn{clean-up}, which will remove the excess whitespace after you've typed the @samp{;}. See @ref{Clean-ups} for a full description. See also @ref{Electric Keys} for a summary of clean-ups listed by key. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Hungry WS Deletion @section Hungry Deletion of Whitespace @cindex hungry-deletion @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! If you want to delete an entire block of whitespace at point, you can use @dfn{hungry deletion}. This deletes all the contiguous whitespace either before point or after point in a single operation. ``Whitespace'' here includes tabs and newlines, but not comments or preprocessor commands. Hungry deletion can markedly cut down on the number of times you have to hit deletion keys when, for example, you've made a mistake on the preceding line and have already pressed @kbd{C-j}. Hungry deletion is a simple feature that some people find extremely useful. In fact, you might find yourself wanting it in @strong{all} your editing modes! Loosely speaking, in what follows, @dfn{@key{DEL}} means ``the backspace key'' and @dfn{@key{DELETE}} means ``the forward delete key''. This is discussed in more detail below. There are two different ways you can use hungry deletion: @table @asis @item Using @dfn{Hungry Delete Mode} with @kbd{@key{DEL}} and @kbd{C-d} Here you toggle Hungry Delete minor mode with @kbd{M-x c-toggle-hungry-state}@footnote{Prior to @ccmode{} 5.31, this command was bound to @kbd{C-c C-d}. @kbd{C-c C-d} is now the default binding for @code{c-hungry-delete-forward}.} (@pxref{Minor Modes}.) This makes @kbd{@key{DEL}} and @kbd{C-d} do backwards and forward hungry deletion. @table @asis @item @kbd{@key{DEL}} (@code{c-electric-backspace}) @kindex DEL @findex c-electric-backspace @findex electric-backspace @r{(c-)} This command is run by default when you hit the @kbd{@key{DEL}} key. When hungry delete mode is enabled, it deletes any amount of whitespace in the backwards direction. Otherwise, or when used with a prefix argument or in a literal (@pxref{Auto-newlines}), the command just deletes backwards in the usual way. (More precisely, it calls the function contained in the variable @code{c-backspace-function}, passing it the prefix argument, if any.) @item @code{c-backspace-function} @vindex c-backspace-function @vindex backspace-function @r{(c-)} @findex backward-delete-char-untabify Hook that gets called by @code{c-electric-backspace} when it doesn't do an ``electric'' deletion of the preceding whitespace. The default value is @code{backward-delete-char-untabify} (@pxref{Deletion,,,@lispref{}, @lispreftitle{}}, the function which deletes a single character. @item @kbd{C-d} (@code{c-electric-delete-forward}) @kindex C-d @findex c-electric-delete-forward @findex electric-delete-forward @r{(c-)} This function, which is bound to @kbd{C-d} by default, works just like @code{c-electric-backspace} but in the forward direction. When it doesn't do an ``electric'' deletion of the following whitespace, it just does @code{delete-char}, more or less. (Strictly speaking, it calls the function in @code{c-delete-function} with the prefix argument.) @item @code{c-delete-function} @vindex c-delete-function @vindex delete-function @r{(c-)} @findex delete-char Hook that gets called by @code{c-electric-delete-forward} when it doesn't do an ``electric'' deletion of the following whitespace. The default value is @code{delete-char}. @end table @item Using Distinct Bindings The other (newer and recommended) way to use hungry deletion is to perform @code{c-hungry-delete-backwards} and @code{c-hungry-delete-forward} directly through their key sequences rather than using the minor mode toggling. @table @asis @item @kbd{C-c C-@key{DEL}}, or @kbd{C-c @key{DEL}} (@code{c-hungry-delete-backwards})@footnote{This command was formerly known as @code{c-hungry-backspace}.} @kindex C-c C-Backspace @kindex C-c Backspace @kindex C-c C-DEL @kindex C-c DEL @findex c-hungry-delete-backwards @findex hungry-delete-backwards @r{(c-)} Delete any amount of whitespace in the backwards direction (regardless whether hungry-delete mode is enabled or not). This command is bound to both @kbd{C-c C-@key{DEL}} and @kbd{C-c @key{DEL}}, since the more natural one, @kbd{C-c C-@key{DEL}}, is sometimes difficult to type at a character terminal. @item @kbd{C-c C-d}, @kbd{C-c C-@key{DELETE}}, or @kbd{C-c @key{DELETE}} (@code{c-hungry-delete-forward}) @kindex C-c C-d @kindex C-c C-Delete @kindex C-c Delete @findex c-hungry-delete-forward @findex hungry-delete-forward @r{(c-)} Delete any amount of whitespace in the forward direction (regardless whether hungry-delete mode is enabled or not). This command is bound to both @kbd{C-c C-@key{Delete}} and @kbd{C-c @key{Delete}} for the same reason as for @key{DEL} above. @end table @end table @kindex Delete @kindex Backspace When we talk about @kbd{@key{DEL}}, and @kbd{@key{Delete}} above, we actually do so without connecting them to the physical keys commonly known as @key{Backspace} and @key{Delete}. The default bindings to those two keys depends on the flavor of (X)Emacs you are using. @findex c-electric-delete @findex electric-delete @r{(c-)} @findex c-hungry-delete @findex hungry-delete @r{(c-)} @vindex delete-key-deletes-forward In XEmacs 20.3 and beyond, the @key{Backspace} key is bound to @code{c-electric-backspace} and the @key{Delete} key is bound to @code{c-electric-delete}. You control the direction it deletes in by setting the variable @code{delete-key-deletes-forward}, a standard XEmacs variable. @c This variable is encapsulated by XEmacs's (defsubst delete-forward-p ...). When this variable is non-@code{nil}, @code{c-electric-delete} will do forward deletion with @code{c-electric-delete-forward}, otherwise it does backward deletion with @code{c-electric-backspace}. Similarly, @kbd{C-c @key{Delete}} and @kbd{C-c C-@key{Delete}} are bound to @code{c-hungry-delete} which is controlled in the same way by @code{delete-key-deletes-forward}. @findex normal-erase-is-backspace-mode Emacs 21 and later automatically binds @key{Backspace} and @key{Delete} to @kbd{DEL} and @kbd{C-d} according to your environment, and @ccmode{} extends those bindings to @kbd{C-c C-@key{Backspace}} etc. If you need to change the bindings through @code{normal-erase-is-backspace-mode} then @ccmode{} will also adapt its extended bindings accordingly. In earlier (X)Emacs versions, @ccmode{} doesn't bind either @key{Backspace} or @key{Delete} directly. Only the key codes @kbd{DEL} and @kbd{C-d} are bound, and it's up to the default bindings to map the physical keys to them. You might need to modify this yourself if the defaults are unsuitable. Getting your @key{Backspace} and @key{Delete} keys properly set up can sometimes be tricky. The information in @ref{DEL Does Not Delete,,,emacs, GNU Emacs Manual}, might be helpful if you're having trouble with this in GNU Emacs. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Subword Movement @section Subword Movement and Editing @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @cindex nomenclature @cindex subword In spite of the GNU Coding Standards, it is popular to name a symbol by mixing uppercase and lowercase letters, e.g., @samp{GtkWidget}, @samp{EmacsFrameClass}, or @samp{NSGraphicsContext}. Here we call these mixed case symbols @dfn{nomenclatures}. Also, each capitalized (or completely uppercase) part of a nomenclature is called a @dfn{subword}. Here are some examples: @multitable {@samp{NSGraphicsContext}} {@samp{NS}, @samp{Graphics}, and @samp{Context}} @c This could be converted to @headitem when we require Texinfo 4.7 @iftex @item @b{Nomenclature} @tab @b{Subwords} @end iftex @ifnottex @item Nomenclature @tab Subwords @item --------------------------------------------------------- @end ifnottex @item @samp{GtkWindow} @tab @samp{Gtk} and @samp{Window} @item @samp{EmacsFrameClass} @tab @samp{Emacs}, @samp{Frame}, and @samp{Class} @item @samp{NSGraphicsContext} @tab @samp{NS}, @samp{Graphics}, and @samp{Context} @end multitable The subword minor mode replaces the basic word oriented movement and editing commands with variants that recognize subwords in a nomenclature and treat them as separate words: @findex c-forward-subword @findex forward-subword @r{(c-)} @findex c-backward-subword @findex backward-subword @r{(c-)} @findex c-mark-subword @findex mark-subword @r{(c-)} @findex c-kill-subword @findex kill-subword @r{(c-)} @findex c-backward-kill-subword @findex backward-kill-subword @r{(c-)} @findex c-transpose-subwords @findex transpose-subwords @r{(c-)} @findex c-capitalize-subword @findex capitalize-subword @r{(c-)} @findex c-upcase-subword @findex upcase-subword @r{(c-)} @findex c-downcase-subword @findex downcase-subword @r{(c-)} @multitable @columnfractions .20 .40 .40 @c This could be converted to @headitem when we require Texinfo 4.7 @iftex @item @b{Key} @tab @b{Word oriented command} @tab @b{Subword oriented command} @end iftex @ifnottex @item Key @tab Word oriented command @tab Subword oriented command @item ---------------------------------------------------------------------------- @end ifnottex @item @kbd{M-f} @tab @code{forward-word} @tab @code{c-forward-subword} @item @kbd{M-b} @tab @code{backward-word} @tab @code{c-backward-subword} @item @kbd{M-@@} @tab @code{mark-word} @tab @code{c-mark-subword} @item @kbd{M-d} @tab @code{kill-word} @tab @code{c-kill-subword} @item @kbd{M-@key{DEL}} @tab @code{backward-kill-word} @tab @code{c-backward-kill-subword} @item @kbd{M-t} @tab @code{transpose-words} @tab @code{c-transpose-subwords} @item @kbd{M-c} @tab @code{capitalize-word} @tab @code{c-capitalize-subword} @item @kbd{M-u} @tab @code{upcase-word} @tab @code{c-upcase-subword} @item @kbd{M-l} @tab @code{downcase-word} @tab @code{c-downcase-subword} @end multitable Note that if you have changed the key bindings for the word oriented commands in your @file{.emacs} or a similar place, the keys you have configured are also used for the corresponding subword oriented commands. Type @kbd{C-c C-w} to toggle subword mode on and off. To make the mode turn on automatically, put the following code in your @file{.emacs}: @example (add-hook 'c-mode-common-hook (lambda () (subword-mode 1))) @end example As a bonus, you can also use @code{subword-mode} in non-@ccmode{} buffers by typing @kbd{M-x subword-mode}. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Other Commands @section Other Commands @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Here are the various other commands that didn't fit anywhere else: @table @asis @item @kbd{C-c .} (@code{c-set-style}) @kindex C-c . @findex c-set-style @findex set-style @r{(c-)} Switch to the specified style in the current buffer. Use like this: @example @kbd{C-c . @var{style-name} @key{RET}} @end example You can use the @key{TAB} in the normal way to do completion on the style name. Note that all style names are case insensitive, even the ones you define yourself. Setting a style in this way does @emph{not} automatically reindent your file. For commands that you can use to view the effect of your changes, see @ref{Indentation Commands} and @ref{Filling and Breaking}. For details of the @ccmode{} style system, see @ref{Styles}. @item @kbd{C-c :} (@code{c-scope-operator}) @kindex C-c : @findex c-scope-operator @findex scope-operator @r{(c-)} In C++, it is also sometimes desirable to insert the double-colon scope operator without performing the electric behavior of colon insertion. @kbd{C-c :} does just this. @item @kbd{C-c C-z} (@code{c-display-defun-name}) @kindex C-c C-z @findex c-display-defun-name @findex display-defun-name @r{(c-)} Display the current function name, if any, in the minibuffer. Additionally, if a prefix argument is given, push the function name to the kill ring. If there is no current function, @code{c-display-defun-name} does nothing. In Emacs, you can use this command in the middle of an interactive search if you set the customizable option @code{isearch-allow-scroll} to non-@code{nil}. @xref{Not Exiting Isearch,,,emacs, GNU Emacs Manual}. @item @kbd{C-c C-\} (@code{c-backslash-region}) @kindex C-c C-\ @findex c-backslash-region @findex backslash-region @r{(c-)} This function inserts and aligns or deletes end-of-line backslashes in the current region. These are typically used in multi-line macros. With no prefix argument, it inserts any missing backslashes and aligns them according to the @code{c-backslash-column} and @code{c-backslash-max-column} variables. With a prefix argument, it deletes any backslashes. The function does not modify blank lines at the start of the region. If the region ends at the start of a line, it always deletes the backslash (if any) at the end of the previous line. To customize the precise workings of this command, @ref{Custom Macros}. @end table @noindent The recommended line breaking function, @code{c-context-line-break} (@pxref{Filling and Breaking}), is especially nice if you edit multiline macros frequently. When used inside a macro, it automatically inserts and adjusts the mandatory backslash at the end of the line to keep the macro together, and it leaves the point at the right indentation column for the code. Thus you can write code inside macros almost exactly as you can elsewhere, without having to bother with the trailing backslashes. @table @asis @item @kbd{C-c C-e} (@code{c-macro-expand}) @kindex C-c C-e @findex c-macro-expand @findex macro-expand @r{(c-)} This command expands C, C++, Objective C or Pike macros in the region, using an appropriate external preprocessor program. Normally it displays its output in a temporary buffer, but if you give it a prefix arg (with @kbd{C-u C-c C-e}) it will overwrite the original region with the expansion. The command does not work in any of the other modes, and the key sequence is not bound in these other modes. @code{c-macro-expand} isn't actually part of @ccmode{}, even though it is bound to a @ccmode{} key sequence. If you need help setting it up or have other problems with it, you can either read its source code or ask for help in the standard (X)Emacs forums. @end table @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Font Locking @chapter Font Locking @cindex font locking @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @cindex Font Lock mode @ccmode{} provides font locking for its supported languages by supplying patterns for use with Font Lock mode. This means that you get distinct faces on the various syntactic parts such as comments, strings, keywords and types, which is very helpful in telling them apart at a glance and discovering syntactic errors. @xref{Font Lock,,, emacs, GNU Emacs Manual}, for ways to enable font locking in @ccmode{} buffers. @strong{Please note:} The font locking in AWK mode is currently not integrated with the rest of @ccmode{}. Only the last section of this chapter, @ref{AWK Mode Font Locking}, applies to AWK@. The other sections apply to the other languages. @menu * Font Locking Preliminaries:: * Faces:: * Doc Comments:: * Wrong Comment Style:: * Misc Font Locking:: * AWK Mode Font Locking:: @end menu @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Font Locking Preliminaries @section Font Locking Preliminaries @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! The font locking for most of the @ccmode{} languages were provided directly by the Font Lock package prior to version 5.30 of @ccmode{}. In the transition to @ccmode{} the patterns have been reworked completely and are applied uniformly across all the languages except AWK mode, just like the indentation rules (although each language still has some peculiarities of its own, of course). Since the languages previously had completely separate font locking patterns, this means that it's a bit different in most languages now. The main goal for the font locking in @ccmode{} is accuracy, to provide a dependable aid in recognizing the various constructs. Some, like strings and comments, are easy to recognize while others, like declarations and types, can be very tricky. @ccmode{} can go to great lengths to recognize declarations and casts correctly, especially when the types aren't recognized by standard patterns. This is a fairly demanding analysis which can be slow on older hardware, and it can therefore be disabled by choosing a lower decoration level with the variable @code{font-lock-maximum-decoration} (@pxref{Font Lock,,, emacs, GNU Emacs Manual}). @vindex font-lock-maximum-decoration The decoration levels are used as follows: @enumerate @comment 1 @item Minimal font locking: Fontify only comments, strings and preprocessor directives (in the languages that use cpp). @comment 2 @item Fast font locking: In addition to level 1, fontify keywords, simple types and declarations that are easy to recognize. The variables @code{*-font-lock-extra-types} (where @samp{*} is the name of the language) are used to recognize types (see below). Documentation comments like Javadoc are fontified according to @code{c-doc-comment-style} (@pxref{Doc Comments}). Use this if you think the font locking is too slow. It's the closest corresponding level to level 3 in the old font lock patterns. @comment 3 @item Accurate font locking: Like level 2 but uses a different approach that can recognize types and declarations much more accurately. The @code{*-font-lock-extra-types} variables are still used, but user defined types are recognized correctly anyway in most cases. Therefore those variables should be fairly restrictive and not contain patterns that are uncertain. @cindex Lazy Lock mode @cindex Just-in-time Lock mode This level is designed for fairly modern hardware and a font lock support mode like Lazy Lock or Just-in-time Lock mode that only fontifies the parts that are actually shown. Fontifying the whole buffer at once can easily get bothersomely slow even on contemporary hardware. @xref{Font Lock,,,@emacsman{}, @emacsmantitle{}}. @end enumerate @cindex user defined types @cindex types, user defined Since user defined types are hard to recognize you can provide additional regexps to match those you use: @defopt c-font-lock-extra-types @defoptx c++-font-lock-extra-types @defoptx objc-font-lock-extra-types @defoptx java-font-lock-extra-types @defoptx idl-font-lock-extra-types @defoptx pike-font-lock-extra-types For each language there's a variable @code{*-font-lock-extra-types}, where @samp{*} stands for the language in question. It contains a list of regexps that matches identifiers that should be recognized as types, e.g., @samp{\\sw+_t} to recognize all identifiers ending with @samp{_t} as is customary in C code. Each regexp should not match more than a single identifier. The default values contain regexps for many types in standard runtime libraries that are otherwise difficult to recognize, and patterns for standard type naming conventions like the @samp{_t} suffix in C and C++. Java, Objective-C and Pike have as a convention to start class names with capitals, so there are patterns for that in those languages. Despite the names of these variables, they are not only used for fontification but in other places as well where @ccmode{} needs to recognize types. @end defopt @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Faces @section Faces @cindex faces @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @ccmode{} attempts to use the standard faces for programming languages in accordance with their intended purposes as far as possible. No extra faces are currently provided, with the exception of a replacement face @code{c-invalid-face} for emacsen that don't provide @code{font-lock-warning-face}. @itemize @bullet @item @vindex font-lock-comment-face Normal comments are fontified in @code{font-lock-comment-face}. @item @vindex font-lock-doc-face @vindex font-lock-doc-string-face @vindex font-lock-comment-face Comments that are recognized as documentation (@pxref{Doc Comments}) get @code{font-lock-doc-face} (Emacs) or @code{font-lock-doc-string-face} (XEmacs) if those faces exist. If they don't then @code{font-lock-comment-face} is used. @item @vindex font-lock-string-face String and character literals are fontified in @code{font-lock-string-face}. @item @vindex font-lock-keyword-face Keywords are fontified with @code{font-lock-keyword-face}. @item @vindex font-lock-function-name-face @code{font-lock-function-name-face} is used for function names in declarations and definitions, and classes in those contexts. It's also used for preprocessor defines with arguments. @item @vindex font-lock-variable-name-face Variables in declarations and definitions, and other identifiers in such variable contexts, get @code{font-lock-variable-name-face}. It's also used for preprocessor defines without arguments. @item @vindex font-lock-constant-face @vindex font-lock-reference-face Builtin constants are fontified in @code{font-lock-constant-face} if it exists, @code{font-lock-reference-face} otherwise. As opposed to the preceding two faces, this is used on the names in expressions, and it's not used in declarations, even if there happen to be a @samp{const} in them somewhere. @item @vindex font-lock-type-face @code{font-lock-type-face} is put on types (both predefined and user defined) and classes in type contexts. @item @vindex font-lock-constant-face @vindex font-lock-reference-face Label identifiers get @code{font-lock-constant-face} if it exists, @code{font-lock-reference-face} otherwise. @item Name qualifiers and identifiers for scope constructs are fontified like labels. @item Special markup inside documentation comments are also fontified like labels. @item @vindex font-lock-preprocessor-face @vindex font-lock-builtin-face @vindex font-lock-reference-face Preprocessor directives get @code{font-lock-preprocessor-face} if it exists (i.e., XEmacs). In Emacs they get @code{font-lock-builtin-face} or @code{font-lock-reference-face}, for lack of a closer equivalent. @item @vindex font-lock-warning-face @vindex c-invalid-face @vindex invalid-face @r{(c-)} Some kinds of syntactic errors are fontified with @code{font-lock-warning-face} in Emacs. In older XEmacs versions there's no corresponding standard face, so there a special @code{c-invalid-face} is used, which is defined to stand out sharply by default. Note that it's not used for @samp{#error} or @samp{#warning} directives, since those aren't syntactic errors in themselves. @end itemize @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Doc Comments @section Documentation Comments @cindex documentation comments @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! There are various tools to supply documentation in the source as specially structured comments, e.g., the standard Javadoc tool in Java. @ccmode{} provides an extensible mechanism to fontify such comments and the special markup inside them. @defopt c-doc-comment-style @vindex doc-comment-style @r{(c-)} This is a style variable that specifies which documentation comment style to recognize, e.g., @code{javadoc} for Javadoc comments. The value may also be a list of styles, in which case all of them are recognized simultaneously (presumably with markup cues that don't conflict). The value may also be an association list to specify different comment styles for different languages. The symbol for the major mode is then looked up in the alist, and the value of that element is interpreted as above if found. If it isn't found then the symbol @code{other} is looked up and its value is used instead. The default value for @code{c-doc-comment-style} is @w{@code{((java-mode . javadoc) (pike-mode . autodoc) (c-mode . gtkdoc))}}. Note that @ccmode{} uses this variable to set other variables that handle fontification etc. That's done at mode initialization or when you switch to a style which sets this variable. Thus, if you change it in some other way, e.g., interactively in a CC Mode buffer, you will need to do @kbd{M-x java-mode} (or whatever mode you're currently using) to reinitialize. @findex c-setup-doc-comment-style @findex setup-doc-comment-style @r{(c-)} Note also that when @ccmode{} starts up, the other variables are modified before the mode hooks are run. If you change this variable in a mode hook, you'll have to call @code{c-setup-doc-comment-style} afterwards to redo that work. @end defopt @ccmode{} currently provides handing of the following doc comment styles: @table @code @item javadoc @cindex Javadoc markup Javadoc comments, the standard tool in Java. @item autodoc @cindex Pike autodoc markup For Pike autodoc markup, the standard in Pike. @item gtkdoc @cindex GtkDoc markup For GtkDoc markup, widely used in the Gnome community. @item doxygen @cindex Doxygen markup For Doxygen markup, which can be used with C, C++, Java and variety of other languages. @end table The above is by no means complete. If you'd like to see support for other doc comment styles, please let us know (@pxref{Mailing Lists and Bug Reports}). You can also write your own doc comment fontification support to use with @code{c-doc-comment-style}: Supply a variable or function @code{*-font-lock-keywords} where @samp{*} is the name you want to use in @code{c-doc-comment-style}. If it's a variable, it's prepended to @code{font-lock-keywords}. If it's a function, it's called at mode initialization and the result is prepended. For an example, see @code{javadoc-font-lock-keywords} in @file{cc-fonts.el}. It is even possible, to a limited extent, to fontify constructs inside a doc comment with other faces. For an example, see pike autodoc comment style towards the end of @file{cc-fonts-el}. If you add support for another doc comment style, please consider contributing it: send a note to @email{bug-cc-mode@@gnu.org}. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Wrong Comment Style @comment node-name, next, previous, up @section Marking ``Wrong'' style comments @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Most languages supported by @ccmode{} have two styles of comments, namely block comments and line comments. Your project may have such a strong preference for one of them, that you wish ``wrong'' style comments to be clearly marked. You can get @ccmode{} to do this by setting the default comment style, if necessary, (@pxref{Minor Modes}) and setting the customizable option @code{c-mark-wrong-style-of-comment} to non-@code{nil}. @defvar c-mark-wrong-style-of-comment @vindex mark-wrong-style-of-comment (c-) When this customizable option is non-@code{nil}, comment delimiters which aren't of the default style will be fontified with @code{font-lock-warning-face}. @end defvar @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Misc Font Locking @comment node-name, next, previous, up @section Miscellaneous Font Locking @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! In some languages, particularly in C++, there are constructs which are syntactically ambiguous---they could be either declarations or expressions, and @ccmode{} cannot tell for sure which. Often such a construct is one of the operators @samp{*} or @samp{&} surrounded by two identifiers. Experience shows that very often when such a construct is a declaration it will be written with the operator touching exactly one of the identifiers, like: @example foo *bar @end example or @example foo& bar @end example . Whether such code is fontified depends on the setting of @code{c-asymmetry-fontification-flag}. @defvar c-asymmetry-fontification-flag @vindex asymmetry-fontification-flag @r{(c-)} When @code{c-asymmetry-fontification-flag} is non-@code{nil} (which it is by default), code like the above, with white space either before or after the operator, but not both, is fontified as a declaration. When the variable is nil, such a construct gets the default face. @end defvar When the construct is an expression there will often be white space both before and after the operator or there will be no white space around it at all, like: @example foo * bar @end example or @example foo&bar @end example . Such code is not fontified as a declaration. (Typically, the identifiers don't get a non-default face.) For clarity's sake, we emphasize that the ``asymmetry'' rule in this section only applies when CC Mode cannot disambiguate a construct in any other way. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node AWK Mode Font Locking @comment node-name, next, previous, up @section AWK Mode Font Locking @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! The general appearance of font-locking in AWK mode is much like in any other programming mode. @xref{Faces for Font Lock,,,elisp, GNU Emacs Lisp Reference Manual}. The following faces are, however, used in a non-standard fashion in AWK mode: @table @asis @item @code{font-lock-variable-name-face} This face was intended for variable declarations. Since variables are not declared in AWK, this face is used instead for AWK system variables (such as @code{NF}) and ``Special File Names'' (such as @code{"/dev/stderr"}). @item @code{font-lock-builtin-face} (Emacs)/@code{font-lock-preprocessor-face} (XEmacs) This face is normally used for preprocessor directives in @ccmode{}. There are no such things in AWK, so this face is used instead for standard functions (such as @code{match}). @item @code{font-lock-string-face} As well as being used for strings, including localizable strings, (delimited by @samp{"} and @samp{_"}), this face is also used for AWK regular expressions (delimited by @samp{/}). @item @code{font-lock-warning-face} (Emacs)/@code{c-invalid-face} (XEmacs) This face highlights the following syntactically invalid AWK constructs: @itemize @bullet @item An unterminated string or regular expression. Here the opening delimiter (@samp{"} or @samp{/} or @samp{_"}) is displayed in @code{font-lock-warning-face}. This is most noticeable when typing in a new string/regular expression into a buffer, when the warning-face serves as a continual reminder to terminate the construct. AWK mode fontifies unterminated strings/regular expressions differently from other modes: Only the text up to the end of the line is fontified as a string (escaped newlines being handled correctly), rather than the text up to the next string quote. @item A space between the function name and opening parenthesis when calling a user function. The last character of the function name and the opening parenthesis are highlighted. This font-locking rule will spuriously highlight a valid concatenation expression where an identifier precedes a parenthesized expression. Unfortunately. @item Whitespace following the @samp{\} in what otherwise looks like an escaped newline. The @samp{\} is highlighted. @end itemize @end table @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Config Basics @comment node-name, next, previous, up @chapter Configuration Basics @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @cindex Emacs Initialization File @cindex Configuration You configure @ccmode{} by setting Lisp variables and calling (and perhaps writing) Lisp functions@footnote{DON'T PANIC!!! This isn't difficult.}, which is usually done by adding code to an Emacs initialization file. This file might be @file{site-start.el} or @file{.emacs} or @file{init.el} or @file{default.el} or perhaps some other file. @xref{Init File,,,@emacsman{}, @emacsmantitle{}}. For the sake of conciseness, we just call this file ``your @file{.emacs}'' throughout the rest of the manual. Several of these variables (currently 16), are known collectively as @dfn{style variables}. @ccmode{} provides a special mechanism, known as @dfn{styles} to make it easier to set these variables as a group, to ``inherit'' settings from one style into another, and so on. Style variables remain ordinary Lisp variables, whose values can be read and changed independently of the style system. @xref{Style Variables}. There are several ways you can write the code, depending on the precise effect you want---they are described further down on this page. If you are new to @ccmode{}, we suggest you begin with the simplest method, ``Top-level commands or the customization interface''. If you make conflicting settings in several of these ways, the way that takes precedence is the one that appears latest in this list: @c Version of list for Texinfo <= 4.x @ifclear txicommandconditionals @itemize @w{} @item @table @asis @item Style @itemx File Style@footnote{In earlier versions of @ccmode{}, a File Style setting took precedence over any other setting apart from a File Local Variable setting.} @itemx Top-level command or ``customization interface'' @itemx Hook @itemx File Local Variable setting @end table @end itemize @end ifclear @c Version of list for Texinfo >= 5.x @ifset txicommandconditionals @itemize @w{} @item Style @item File Style@footnote{In earlier versions of @ccmode{}, a File Style setting took precedence over any other setting apart from a File Local Variable setting.} @item Top-level command or ``customization interface'' @item Hook @item File Local Variable setting @end itemize @end ifset Here is a summary of the different ways of writing your configuration settings: @table @asis @item Top-level commands or the ``customization interface'' Most simply, you can write @code{setq} and similar commands at the top level of your @file{.emacs} file. When you load a @ccmode{} buffer, it initializes its configuration from these global values (at least, for those settings you have given values to), so it makes sense to have these @code{setq} commands run @emph{before} @ccmode{} is first initialized---in particular, before any call to @code{desktop-read} (@pxref{Saving Emacs Sessions,,, emacs, GNU Emacs Manual}). For example, you might set c-basic-offset thus: @example (setq c-basic-offset 4) @end example You can use the more user friendly Customization interface instead, but this manual does not cover in detail how that works. To do this, start by typing @kbd{M-x customize-group @key{RET} c @key{RET}}. @xref{Easy Customization,,,@emacsman{}, @emacsmantitle{}}. @c The following note really belongs in the Emacs manual. Emacs normally writes the customizations at the end of your @file{.emacs} file. If you use @code{desktop-read}, you should edit your @file{.emacs} to place the call to @code{desktop-read} @emph{after} the customizations. The first initialization of @ccmode{} puts a snapshot of the configuration settings into the special style @code{user}. @xref{Built-in Styles}. For basic use of Emacs, either of these ways of configuring is adequate. However, the settings are then the same in all @ccmode{} buffers and it can be clumsy to communicate them between programmers. For more flexibility, you'll want to use one (or both) of @ccmode{}'s more sophisticated facilities, hooks and styles. @item Hooks An Emacs @dfn{hook} is a place to put Lisp functions that you want Emacs to execute later in specific circumstances. @xref{Hooks,,,@lispref{}, @lispreftitle{}}. @ccmode{} supplies a main hook and a language-specific hook for each language it supports; any functions you put onto these hooks get executed as the last part of a buffer's initialization. Typically you put most of your customization within the main hook, and use the language-specific hooks to vary the customization settings between language modes. For example, if you wanted different (non-standard) values of @code{c-basic-offset} in C Mode and Java Mode buffers, you could do it like this: @example @group (defun my-c-mode-hook () (setq c-basic-offset 3)) (add-hook 'c-mode-hook 'my-c-mode-hook) (defun my-java-mode-hook () (setq c-basic-offset 6)) (add-hook 'java-mode-hook 'my-java-mode-hook) @end group @end example See @ref{CC Hooks} for more details on the use of @ccmode{} hooks. @item Styles A @ccmode{} @dfn{style} is a coherent collection of customizations with a name. At any time, exactly one style is active in each @ccmode{} buffer, either the one you have selected or a default. @ccmode{} is delivered with several existing styles. Additionally, you can create your own styles, possibly based on these existing styles. If you worked in a programming team called the ``Free Group'', which had its own coding standards, you might well have this in your @file{.emacs} file: @example (setq c-default-style '((java-mode . "java") (awk-mode . "awk") (other . "free-group-style"))) @end example See @ref{Styles} for fuller details on using @ccmode{} styles and how to create them. @item File Local Variable setting A @dfn{file local variable setting} is a setting which applies to an individual source file. You put this in a @dfn{local variables list}, a special block at the end of the source file (@pxref{Specifying File Variables,,,@emacsman{}}). @item File Styles A @dfn{file style} is a rarely used variant of the ``style'' mechanism described above, which applies to an individual source file. @xref{File Styles}. You use this by setting certain special variables in a local variables list (@pxref{Specifying File Variables,,,@emacsman{}}). @item Hooks with Styles For ultimate flexibility, you can use hooks and styles together. For example, if your team were developing a product which required a Linux driver, you'd probably want to use the ``linux'' style for the driver, and your own team's style for the rest of the code. You could achieve this with code like this in your @file{.emacs}: @example @group (defun my-c-mode-hook () (c-set-style (if (and (buffer-file-name) (string-match "/usr/src/linux" (buffer-file-name))) "linux" "free-group-style"))) (add-hook 'c-mode-hook 'my-c-mode-hook) @end group @end example In a programming team, a hook is also a good place for each member to put his own personal preferences. For example, you might be the only person in your team who likes Auto-newline minor mode. You could have it enabled by default by placing the following in your @file{.emacs}: @example @group (defun my-turn-on-auto-newline () (c-toggle-auto-newline 1)) (add-hook 'c-mode-common-hook 'my-turn-on-auto-newline) @end group @end example @end table @menu * CC Hooks:: * Style Variables:: * Styles:: @end menu @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node CC Hooks @section Hooks @cindex mode hooks @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @c The node name is "CC Hooks" rather than "Hooks" because of a bug in @c some older versions of Info, e.g., the info.el in GNU Emacs 21.3. @c If you go to "Config Basics" and hit on the xref to "CC @c Hooks" the function Info-follow-reference searches for "*Note: CC @c Hooks" from the beginning of the page. If this node were instead @c named "Hooks", that search would spuriously find "*Note: @c Hooks(elisp)" and go to the wrong node. @ccmode{} provides several hooks that you can use to customize the mode for your coding style. The main hook is @code{c-mode-common-hook}; typically, you'll put the bulk of your customizations here. In addition, each language mode has its own hook, allowing you to fine tune your settings individually for the different @ccmode{} languages, and there is a package initialization hook. Finally, there is @code{c-special-indent-hook}, which enables you to solve anomalous indentation problems. It is described in @ref{Other Indentation}, not here. All these hooks adhere to the standard Emacs conventions. When you open a buffer, @ccmode{} first initializes it with the currently active style (@pxref{Styles}). Then it calls @code{c-mode-common-hook}, and finally it calls the language-specific hook. Thus, any style settings done in these hooks will override those set by @code{c-default-style}. @defvar c-initialization-hook @vindex initialization-hook @r{(c-)} Hook run only once per Emacs session, when @ccmode{} is initialized. This is a good place to change key bindings (or add new ones) in any of the @ccmode{} key maps. @xref{Sample Init File}. @end defvar @defvar c-mode-common-hook @vindex mode-common-hook @r{(c-)} Common hook across all languages. It's run immediately before the language specific hook. @end defvar @defvar c-mode-hook @defvarx c++-mode-hook @defvarx objc-mode-hook @defvarx java-mode-hook @defvarx idl-mode-hook @defvarx pike-mode-hook @defvarx awk-mode-hook The language specific mode hooks. The appropriate one is run as the last thing when you enter that language mode. @end defvar Although these hooks are variables defined in @ccmode{}, you can give them values before @ccmode{}'s code is loaded---indeed, this is the only way to use @code{c-initialization-hook}. Their values aren't overwritten when @ccmode{} gets loaded. Here's a simplified example of what you can add to your @file{.emacs} file to do things whenever any @ccmode{} language is edited. See the Emacs manuals for more information on customizing Emacs via hooks. @xref{Sample Init File}, for a more complete sample @file{.emacs} file. @example (defun my-c-mode-common-hook () ;; my customizations for all of c-mode and related modes (no-case-fold-search) ) (add-hook 'c-mode-common-hook 'my-c-mode-common-hook) @end example @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Style Variables @section Style Variables @cindex styles @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @cindex style variables The variables that @ccmode{}'s style system control are called @dfn{style variables}. Note that style variables are ordinary Lisp variables, which the style system initializes; you can change their values at any time (e.g., in a hook function). The style system can also set other variables, to some extent. @xref{Styles}. @dfn{Style variables} are handled specially in several ways: @itemize @bullet @item Style variables are by default buffer-local variables. However, they can instead be made global by setting @code{c-style-variables-are-local-p} to @code{nil} before @ccmode{} is initialized. @item @vindex c-old-style-variable-behavior @vindex old-style-variable-behavior @r{(c-)} The default global binding of any style variable (with two exceptions - see below) is the special symbol @code{set-from-style}. When the style system initializes a buffer-local copy of a style variable for a @ccmode{} buffer, if its global binding is still that symbol then it will be set from the current style. Otherwise it will retain its global default@footnote{This is a big change from versions of @ccmode{} earlier than 5.26, where such settings would get overridden by the style system unless special precautions were taken. That was changed since it was counterintuitive and confusing, especially to novice users. If your configuration depends on the old overriding behavior, you can set the variable @code{c-old-style-variable-behavior} to non-@code{nil}.}. This ``otherwise'' happens, for example, when you've set the variable with @code{setq} at the top level of your @file{.emacs} (@pxref{Config Basics}). @item The style variable @code{c-offsets-alist} (@pxref{c-offsets-alist}) is an association list with an element for each syntactic symbol. It's handled a little differently from the other style variables. Its default global binding is the empty list @code{nil}, rather than @code{set-from-style}. Before the style system is initialized, you can add individual elements to @code{c-offsets-alist} by calling @code{c-set-offset} (@pxref{c-offsets-alist}) just like you would set other style variables with @code{setq}. Those elements will then prevail when the style system later initializes a buffer-local copy of @code{c-offsets-alist}. @item The style variable @code{c-special-indent-hook} is also handled in a special way. Styles can only add functions to this hook, not remove them, so any global settings you put on it are always preserved@footnote{This did not change in version 5.26.}. The value you give this variable in a style definition can be either a function or a list of functions. @item The global bindings of the style variables get captured in the special @code{user} style when the style system is first initialized. @xref{Built-in Styles}, for details. @end itemize The style variables are:@* @code{c-indent-comment-alist}, @code{c-indent-comments-syntactically-p} (@pxref{Indentation Commands});@* @code{c-doc-comment-style} (@pxref{Doc Comments});@* @code{c-block-comment-prefix}, @code{c-comment-prefix-regexp} (@pxref{Custom Filling and Breaking});@* @code{c-hanging-braces-alist} (@pxref{Hanging Braces});@* @code{c-hanging-colons-alist} (@pxref{Hanging Colons});@* @code{c-hanging-semi&comma-criteria} (@pxref{Hanging Semicolons and Commas});@* @code{c-cleanup-list} (@pxref{Clean-ups});@* @code{c-basic-offset} (@pxref{Customizing Indentation});@* @code{c-for-clauses-as-arglist} (@pxref{Syntactic Symbols});@* @code{c-offsets-alist} (@pxref{c-offsets-alist});@* @code{c-comment-only-line-offset} (@pxref{Comment Line-Up});@* @code{c-special-indent-hook}, @code{c-label-minimum-indentation} (@pxref{Other Indentation});@* @code{c-backslash-column}, @code{c-backslash-max-column} (@pxref{Custom Macros}). @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Styles @section Styles @cindex styles @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! By @dfn{style} we mean the layout of the code---things like how many columns to indent a block of code, whether an opening brace gets indented to the level of the code it encloses, or of the construct that introduces it, or ``hangs'' at the end of a line. Most people only need to edit code formatted in just a few well-defined and consistent styles. For example, their organization might impose a ``blessed'' style that all its programmers must conform to. Similarly, people who work on GNU software will have to use the GNU coding style. Some shops are more lenient, allowing a variety of coding styles, and as programmers come and go, there could be a number of styles in use. For this reason, @ccmode{} makes it convenient for you to set up logical groupings of customizations called @dfn{styles}, associate a single name for any particular style, and pretty easily start editing new or existing code using these styles. As an alternative to writing a style definition yourself, you can have @ccmode{} @dfn{guess} (at least part of) your style by looking at an already formatted piece of your code, @ref{Guessing the Style}. @menu * Built-in Styles:: * Choosing a Style:: * Adding Styles:: * Guessing the Style:: * File Styles:: @end menu @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Built-in Styles @subsection Built-in Styles @cindex styles, built-in @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! If you're lucky, one of @ccmode{}'s built-in styles might be just what you're looking for. These are: @table @code @item gnu @cindex GNU style Coding style blessed by the Free Software Foundation for C code in GNU programs. @item k&r @cindex K&R style The classic Kernighan and Ritchie style for C code. If you're looking for the style used in the 2nd edition of their book ``The C Programming Language'', then check out the @code{stroustrup} style. @item bsd @cindex BSD style Also known as ``Allman style'' after Eric Allman. @item whitesmith @cindex Whitesmith style Popularized by the examples that came with Whitesmiths C, an early commercial C compiler. @item stroustrup @cindex Stroustrup style The classic Stroustrup style for C++ code. @item ellemtel @cindex Ellemtel style Popular C++ coding standards as defined by ``Programming in C++, Rules and Recommendations,'' Erik Nyquist and Mats Henricson, Ellemtel@footnote{This document is available at @uref{https://www.doc.ic.ac.uk/lab/cplus/c++.rules/} among other places.}. @c N.B. This URL was still valid at 2005/8/28 (ACM). @item linux @cindex Linux style C coding standard for Linux (the kernel). @item python @cindex Python style C coding standard for Python extension modules@footnote{Python is a high level scripting language with a C/C++ foreign function interface. For more information, see @uref{https://www.python.org/}.}. @item java @cindex Java style The style for editing Java code. Note that the default value for @code{c-default-style} installs this style when you enter @code{java-mode}. @item awk @cindex AWK style The style for editing AWK code. Note that the default value for @code{c-default-style} installs this style when you enter @code{awk-mode}. @item user @cindex User style This is a special style created by you. It consists of the factory defaults for all the style variables as modified by the customizations you do either with the Customization interface or by writing @code{setq}s and @code{c-set-offset}s at the top level of your @file{.emacs} file (@pxref{Config Basics}). The style system creates this style as part of its initialization and doesn't modify it afterwards. @end table @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Choosing a Style @subsection Choosing a Style @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! When you create a new buffer, its style will be set from @code{c-default-style}. The factory default is the style @code{gnu}, except in Java and AWK modes where it's @code{java} and @code{awk}. Remember that if you set a style variable with the Customization interface or at the top level of your @file{.emacs} file before the style system is initialized (@pxref{Config Basics}), this setting will override the one that the style system would have given the variable. To set a buffer's style interactively, use the command @kbd{C-c .} (@pxref{Other Commands}). To set it from a file's local variable list, @ref{File Styles}. @defopt c-default-style @vindex default-style @r{(c-)} This variable specifies which style to install by default in new buffers. It takes either a style name string, or an association list of major mode symbols to style names: @enumerate @item When @code{c-default-style} is a string, it must be an existing style name. This style is then used for all modes. @item When @code{c-default-style} is an association list, the mode language is looked up to find a style name string. @item If @code{c-default-style} is an association list where the mode language mode isn't found then the special symbol @samp{other} is looked up. If it's found then the associated style is used. @item If @samp{other} is not found then the @samp{gnu} style is used. @end enumerate In all cases, the style described in @code{c-default-style} is installed @emph{before} the language hooks are run, so you can always override this setting by including an explicit call to @code{c-set-style} in your language mode hook, or in @code{c-mode-common-hook}. The standard value of @code{c-default-style} is @w{@code{((java-mode . "java") (awk-mode . "awk") (other . "gnu"))}}. @end defopt @defvar c-indentation-style @vindex indentation-style @r{(c-)} This variable always contains the buffer's current style name, as a string. @end defvar @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Adding Styles @subsection Adding and Amending Styles @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! If none of the built-in styles is appropriate, you'll probably want to create a new @dfn{style definition}, possibly based on an existing style. To do this, put the new style's settings into a list with the following format; the list can then be passed as an argument to the function @code{c-add-style}. You can see an example of a style definition in @ref{Sample Init File}. @cindex style definition @c @defvr {List} style definition @table @asis @item Structure of a Style Definition List ([@var{base-style}] [(@var{variable} . @var{value}) @dots{}]) Optional @var{base-style}, if present, must be a string which is the name of the @dfn{base style} from which this style inherits. At most one @var{base-style} is allowed in a style definition. If @var{base-style} is not specified, the style inherits from the table of factory default values@footnote{This table is stored internally in the variable c-fallback-style.} instead. All styles eventually inherit from this internal table. Style loops generate errors. The list of pre-existing styles can be seen in @ref{Built-in Styles}. The dotted pairs (@var{variable} . @var{value}) each consist of a variable and the value it is to be set to when the style is later activated.@footnote{Note that if the variable has been given a value by the Customization interface or a @code{setq} at the top level of your @file{.emacs}, this value will override the one the style system tries to give it. @xref{Config Basics}.} The variable can be either a @ccmode{} style variable or an arbitrary Emacs variable. In the latter case, it is @emph{not} made buffer-local by the @ccmode{} style system. @c @end defvr Two variables are treated specially in the dotted pair list: @table @code @item c-offsets-alist The value is in turn a list of dotted pairs of the form @example (@r{@var{syntactic-symbol}} . @r{@var{offset}}) @end example as described in @ref{c-offsets-alist}. These are passed to @code{c-set-offset} so there is no need to set every syntactic symbol in your style, only those that are different from the inherited style. @item c-special-indent-hook The value is added to @code{c-special-indent-hook} using @code{add-hook}, so any functions already on it are kept. If the value is a list, each element of the list is added with @code{add-hook}. @end table @end table Styles are kept in the @code{c-style-alist} variable, but you should never modify this variable directly. Instead, @ccmode{} provides the function @code{c-add-style} for this purpose. @defun c-add-style stylename description &optional set-p @findex add-style @r{(c-)} Add or update a style called @var{stylename}, a string. @var{description} is the new style definition in the form described above. If @var{stylename} already exists in @code{c-style-alist} then it is replaced by @var{description}. (Note, this replacement is total. The old style is @emph{not} merged into the new one.) Otherwise, a new style is added. If the optional @var{set-p} is non-@code{nil} then the new style is applied to the current buffer as well. The use of this facility is deprecated and it might be removed from @ccmode{} in a future release. You should use @code{c-set-style} instead. The sample @file{.emacs} file provides a concrete example of how a new style can be added and automatically set. @xref{Sample Init File}. @end defun @defvar c-style-alist @vindex style-alist @r{(c-)} This is the variable that holds the definitions for the styles. It should not be changed directly; use @code{c-add-style} instead. @end defvar @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Guessing the Style @subsection Guessing the Style @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Instead of specifying a style, you can get @ccmode{} to @dfn{guess} your style by examining an already formatted code buffer. @ccmode{} then determines the ``most frequent'' offset (@pxref{c-offsets-alist}) for each of the syntactic symbols (@pxref{Indentation Engine Basics}) encountered in the buffer, and the ``most frequent'' value of c-basic-offset (@pxref{Customizing Indentation}), then merges the current style with these ``guesses'' to form a new style. This combined style is known as the @dfn{guessed style}. To do this, call @code{c-guess} (or one of the other 5 guessing commands) on your sample buffer. The analysis of your code may take some time. You can then set the guessed style in any @ccmode{} buffer with @code{c-guess-install}. You can display the style with @code{c-guess-view}, and preserve it by copying it into your @file{.emacs} for future use, preferably after editing it. @table @asis @item @kbd{M-x c-guess-no-install} @itemx @kbd{M-x c-guess-buffer-no-install} @itemx @kbd{M-x c-guess-region-no-install} @findex c-guess-no-install @findex c-guess-buffer-no-install @findex c-guess-region-no-install @findex guess-no-install @r{(c-)} @findex guess-buffer-no-install @r{(c-)} @findex guess-region-no-install @r{(c-)} These commands analyze a part of the current buffer and guess the style from it. The part of the buffer examined is either the region (@code{c-guess-region-no-install}), the entire buffer (@code{c-guess-buffer-no-install}), or the first @code{c-guess-region-max} bytes (@code{c-guess-no-install}). Each of these commands can be given an optional prefix argument. This instructs @ccmode{} to combine the new guesses with the current guesses before forming the guessed style. @end table @table @asis @item @kbd{M-x c-guess} @itemx @kbd{M-x c-guess-buffer} @itemx @kbd{M-x c-guess-region} @findex c-guess @findex c-guess-buffer @findex c-guess-region @findex guess @r{(c-)} @findex guess-buffer @r{(c-)} @findex guess-region @r{(c-)} These commands analyze a part of the current buffer, guess the style from it, then install the guessed style on the buffer. The guessed style is given a name based on the buffer's absolute file name, and you can then set this style on any @ccmode{} buffer with @kbd{C-c .}. The part of the buffer examined is either the region (@code{c-guess-region}), the entire buffer (@code{c-guess-buffer}), or the first @code{c-guess-region-max} bytes (@code{c-guess}). Each of these commands can be given an optional prefix argument. This instructs @ccmode{} to combine the new guesses with the current guesses before forming the guessed style. @end table @defopt c-guess-region-max @vindex guess-region-max @r{(c-)} This variable, default 50000, is the size in bytes of the buffer portion examined by c-guess and c-guess-no-install. If set to @code{nil}, the entire buffer is examined. @end defopt @defopt c-guess-offset-threshold @vindex guess-offset-threshold @r{(c-)} This variable, default 10, is the maximum offset, either outwards or inwards, which will be taken into account by the analysis process. Any offset bigger than this will be ignored. For no limit, set this variable to a large number. @end defopt @table @asis @item @kbd{M-x c-guess-install} @findex c-guess-install @findex guess-install @r{(c-)} Set the current buffer's style to the guessed style. This prompts you to enter an optional new style name to give to the guessed style. By default, this name is based on the buffer's absolute file name. You can then use this style like any other. @item @kbd{M-x c-guess-view} @findex c-guess-view @findex guess-view @r{(c-)} Display the most recently guessed style in a temporary buffer. This display is in the form of a @code{c-add-style} form (@pxref{Adding Styles}) which can be easily copied to your @file{.emacs}. You will probably want to edit it first. The display of the guessed style contains these elements: @table @asis @item Placeholder Name You should replace this with a style name of your own. @item Parent Style The style current when the guessing began, from which the guessed style inherits (@pxref{Config Basics}) the settings which weren't guessed. @item Guessed Offsets These are the core result of the guessing process. Each of them is marked by a comment. @item Inherited Offsets These are syntactic offsets which have been taken over from the parent style. To avoid possible future conflicts, you should remove either these offsets or the parent style name. @end table @end table @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node File Styles @subsection File Styles @cindex styles, file local @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @cindex file local variables The Emacs manual describes how you can customize certain variables on a per-file basis by including a @dfn{file local variable} block at the end of the file (@pxref{File Variables,, Local Variables in Files,@emacsman{}, @emacsmantitle{}}). So far, you've only seen a functional interface for setting styles in @ccmode{}, and this can't be used here. @ccmode{} fills the gap by providing two variables for use in a file's local variable list. Don't use them anywhere else! These allow you to customize the style on a per-file basis: @defvar c-file-style @vindex file-style @r{(c-)} Set this variable to a style name string in the Local Variables list. From now on, when you visit the file, @ccmode{} will automatically set the file's style to this one using @code{c-set-style}. @end defvar @defvar c-file-offsets @vindex file-offsets @r{(c-)} Set this variable (in the Local Variables list) to an association list of the same format as @code{c-offsets-alist}. From now on, when you visit the file, @ccmode{} will automatically institute these offsets using @code{c-set-offset}. @end defvar Note that file style settings (i.e., @code{c-file-style}) are applied before file offset settings (i.e., @code{c-file-offsets})@footnote{Also, if either of these are set in a file's local variable section, all the style variable values are made local to that buffer, even if @code{c-style-variables-are-local-p} is @code{nil}. Since this variable is virtually always non-@code{nil} anyhow, you're unlikely to notice this effect.}. If you set any variable by the file local variables mechanism, that setting takes priority over all other settings, even those in your mode hooks (@pxref{CC Hooks}). Any individual setting of a variable will override one made through @code{c-file-style} or @code{c-file-offsets}. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Custom Filling and Breaking @chapter Customizing Filling and Line Breaking @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Since there's a lot of normal text in comments and string literals, @ccmode{} provides features to edit these like in text mode. It does this by hooking in on the different line breaking functions and tuning relevant variables as necessary. @vindex c-comment-prefix-regexp @vindex comment-prefix-regexp @r{(c-)} @cindex comment line prefix @vindex comment-start @vindex comment-end @vindex comment-start-skip @vindex paragraph-start @vindex paragraph-separate @vindex paragraph-ignore-fill-prefix @vindex adaptive-fill-mode @vindex adaptive-fill-regexp @vindex adaptive-fill-first-line-regexp To make Emacs recognize comments and treat text in them as normal paragraphs, @ccmode{} makes several standard variables@footnote{@code{comment-start}, @code{comment-end}, @code{comment-start-skip}, @code{paragraph-start}, @code{paragraph-separate}, @code{paragraph-ignore-fill-prefix}, @code{adaptive-fill-mode}, @code{adaptive-fill-regexp}, and @code{adaptive-fill-first-line-regexp}.} buffer-local and modifies them according to the language syntax and the comment line prefix. @defopt c-comment-prefix-regexp @vindex comment-prefix-regexp @r{(c-)} This style variable contains the regexp used to recognize the @dfn{comment line prefix}, which is the line decoration that starts every line in a comment. The variable is either the comment line prefix itself, or (more usually) an association list with different values for different languages. The symbol for the major mode is looked up in the alist to get the regexp for the language, and if it isn't found then the special symbol @samp{other} is looked up instead. When a comment line gets divided by @kbd{M-j} or the like, @ccmode{} inserts the comment line prefix from a neighboring line at the start of the new line. The default value of c-comment-prefix-regexp is @samp{//+\\|\\**}, which matches C++ style line comments like @example // blah blah @end example @noindent with two or more slashes in front of them, and the second and subsequent lines of C style block comments like @example @group /* * blah blah */ @end group @end example @noindent with zero or more stars at the beginning of every line. If you change this variable, please make sure it still matches the comment starter (i.e., @code{//}) of line comments @emph{and} the line prefix inside block comments. @findex c-setup-paragraph-variables @findex setup-paragraph-variables @r{(c-)} Also note that since @ccmode{} uses the value of @code{c-comment-prefix-regexp} to set up several other variables at mode initialization, there won't be any effect if you just change it inside a @ccmode{} buffer. You need to call the command @code{c-setup-paragraph-variables} too, to update those other variables. That's also the case if you modify @code{c-comment-prefix-regexp} in a mode hook, since @ccmode{} will already have set up these variables before calling the hook. @end defopt In comments, @ccmode{} uses @code{c-comment-prefix-regexp} to adapt the line prefix from the other lines in the comment. @vindex adaptive-fill-mode @cindex Adaptive Fill mode @ccmode{} uses adaptive fill mode (@pxref{Adaptive Fill,,, emacs, GNU Emacs Manual}) to make Emacs correctly keep the line prefix when filling paragraphs. That also makes Emacs preserve the text indentation @emph{inside} the comment line prefix. E.g., in the following comment, both paragraphs will be filled with the left margins of the texts kept intact: @example @group /* Make a balanced b-tree of the nodes in the incoming * stream. But, to quote the famous words of Donald E. * Knuth, * * Beware of bugs in the above code; I have only * proved it correct, not tried it. */ @end group @end example @findex c-setup-filladapt @findex setup-filladapt @r{(c-)} @findex filladapt-mode @vindex filladapt-mode @cindex Filladapt mode It's also possible to use other adaptive filling packages, notably Kyle E. Jones' Filladapt package@footnote{It's available from @uref{http://www.wonderworks.com/}. As of version 2.12, it does however lack a feature that makes it work suboptimally when @code{c-comment-prefix-regexp} matches the empty string (which it does by default). A patch for that is available from @uref{https://cc-mode.sourceforge.net/,, the CC Mode web site}.}, @c 2005/11/22: The above is still believed to be the case. which handles things like bulleted lists nicely. There's a convenience function @code{c-setup-filladapt} that tunes the relevant variables in Filladapt for use in @ccmode{}. Call it from a mode hook, e.g., with something like this in your @file{.emacs}: @example (defun my-c-mode-common-hook () (c-setup-filladapt) (filladapt-mode 1)) (add-hook 'c-mode-common-hook 'my-c-mode-common-hook) @end example @defopt c-block-comment-prefix @vindex block-comment-prefix @r{(c-)} @vindex c-comment-continuation-stars @vindex comment-continuation-stars @r{(c-)} Normally the comment line prefix inserted for a new line inside a comment is deduced from other lines in it. However there's one situation when there's no hint about what the prefix should look like, namely when a block comment is broken for the first time. This style variable@footnote{In versions before 5.26, this variable was called @code{c-comment-continuation-stars}. As a compatibility measure, @ccmode{} still uses the value on that variable if it's set.} is used then as the comment prefix. It defaults to @samp{* }@footnote{Actually, this default setting of @code{c-block-comment-prefix} typically gets overridden by the default style @code{gnu}, which sets it to blank. You can see the line splitting effect described here by setting a different style, e.g., @code{k&r} @xref{Choosing a Style}.}, which makes a comment @example /* Got O(n^2) here, which is a Bad Thing. */ @end example @noindent break into @example @group /* Got O(n^2) here, which * is a Bad Thing. */ @end group @end example Note that it won't work to adjust the indentation by putting leading spaces in @code{c-block-comment-prefix}, since @ccmode{} still uses the normal indentation engine to indent the line. Thus, the right way to fix the indentation is by customizing the @code{c} syntactic symbol. It defaults to @code{c-lineup-C-comments}, which handles the indentation of most common comment styles, see @ref{Line-Up Functions}. @end defopt @defopt c-ignore-auto-fill @vindex ignore-auto-fill @r{(c-)} When auto fill mode is enabled, @ccmode{} can selectively ignore it depending on the context the line break would occur in, e.g., to never break a line automatically inside a string literal. This variable takes a list of symbols for the different contexts where auto-filling never should occur: @table @code @item string Inside a string or character literal. @item c Inside a C style block comment. @item c++ Inside a C++ style line comment. @item cpp Inside a preprocessor directive. @item code Anywhere else, i.e., in normal code. @end table By default, @code{c-ignore-auto-fill} is set to @code{(string cpp code)}, which means that when auto-fill mode is activated, auto-filling only occurs in comments. In literals, it's often desirable to have explicit control over newlines. In preprocessor directives, the necessary @samp{\} escape character before the newline is not automatically inserted, so an automatic line break would produce invalid code. In normal code, line breaks are normally dictated by some logical structure in the code rather than the last whitespace character, so automatic line breaks there will produce poor results in the current implementation. @end defopt @vindex comment-multi-line If inside a comment and @code{comment-multi-line} (@pxref{Auto Fill,,,@emacsman{}, @emacsmantitle{}} is non-@code{nil}, the indentation and line prefix are preserved. If inside a comment and @code{comment-multi-line} is @code{nil}, a new comment of the same type is started on the next line and indented as appropriate for comments. Note that @ccmode{} sets @code{comment-multi-line} to @code{t} at startup. The reason is that @kbd{M-j} could otherwise produce sequences of single line block comments for texts that should logically be treated as one comment, and the rest of the paragraph handling code (e.g., @kbd{M-q} and @kbd{M-a}) can't cope with that, which would lead to inconsistent behavior. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Custom Auto-newlines @chapter Customizing Auto-newlines @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @ccmode{} determines whether to insert auto-newlines in two basically different ways, depending on the character just typed: @table @asis @item Braces and Colons @ccmode{} first determines the syntactic context of the brace or colon (@pxref{Syntactic Symbols}), then looks for a corresponding element in an alist. This element specifies where to put newlines: this is any combination of before and after the brace or colon. If no alist element is found, newlines are inserted both before and after a brace, but none are inserted around a colon. See @ref{Hanging Braces} and @ref{Hanging Colons}. @item Semicolons and Commas The variable @code{c-hanging-semi&comma-criteria} contains a list of functions which determine whether to insert a newline after a newly typed semicolon or comma. @xref{Hanging Semicolons and Commas}. @end table The names of these configuration variables contain @samp{hanging} because they let you @dfn{hang} the pertinent characters. A character which introduces a C construct is said to @dfn{hang on the right} when it appears at the end of a line after other code, being separated by a line break from the construct it introduces, like the opening brace in: @example @group while (i < MAX) @{ total += entry[i]; entry [i++] = 0; @} @end group @end example @noindent A character @dfn{hangs on the left} when it appears at the start of the line after the construct it closes off, like the above closing brace. The next chapter, ``Clean-ups'', describes how to configure @ccmode{} to remove these automatically added newlines in certain specific circumstances. @xref{Clean-ups}. @menu * Hanging Braces:: * Hanging Colons:: * Hanging Semicolons and Commas:: @end menu @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Hanging Braces @section Hanging Braces @cindex hanging braces @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! To specify which kinds of braces you want auto-newlines put around, you set the style variable @code{c-hanging-braces-alist}. Its structure and semantics are described in this section. Details of how to set it up, and its relationship to CC Mode's style system are given in @ref{Style Variables}. Say you wanted an auto-newline after (but not before) the following @samp{@{}: @example if (foo < 17) @{ @end example @noindent First you need to find the @dfn{syntactic context} of the brace---type a @key{RET} before the brace to get it on a line of its own@footnote{Also insert a @samp{\} at the end of the previous line if you're in AWK Mode.}, then type @kbd{C-c C-s}. That will tell you something like: @example ((substatement-open 1061)) @end example @noindent So here you need to put the entry @code{(substatement-open . (after))} into @code{c-hanging-braces-alist}. If you don't want any auto-newlines for a particular syntactic symbol, put this into @code{c-hanging-braces-alist}: @example (brace-entry-open) @end example If some brace syntactic symbol is not in @code{c-hanging-brace-alist}, its entry is taken by default as @code{(before after)}---insert a newline both before and after the brace. In place of a ``before/after'' list you can specify a function in this alist---this is useful when the auto newlines depend on the code around the brace. @defopt c-hanging-braces-alist @vindex hanging-braces-alist @r{(c-)} This variable is an association list which maps syntactic symbols to lists of places to insert a newline. @xref{Association Lists,,,@lispref{}, @lispreftitle{}}. The key of each element is the syntactic symbol, the associated value is either @code{nil}, a list, or a function. @table @asis @item The Key: the syntactic symbol The syntactic symbols that are useful as keys in this list are @code{brace-list-intro}, @code{statement-cont}, @code{inexpr-class-open}, @code{inexpr-class-close}, and all the @code{*-open} and @code{*-close} symbols. @xref{Syntactic Symbols}, for a more detailed description of these syntactic symbols, except for @code{inexpr-class-open} and @code{inexpr-class-close}, which aren't actual syntactic symbols. Elements with any other value as a key get ignored. The braces of anonymous inner classes in Java are given the special symbols @code{inexpr-class-open} and @code{inexpr-class-close}, so that they can be distinguished from the braces of normal classes@footnote{The braces of anonymous classes produce a combination of @code{inexpr-class}, and @code{class-open} or @code{class-close} in normal indentation analysis.}. Note that the aggregate constructs in Pike mode, @samp{(@{}, @samp{@})}, @samp{([}, @samp{])}, and @samp{(<}, @samp{>)}, do not count as brace lists in this regard, even though they do for normal indentation purposes. It's currently not possible to set automatic newlines on these constructs. @item The associated value: the ``ACTION'' list or function The value associated with each syntactic symbol in this association list is called an @var{action}, which can be either a list or a function which returns a list. @xref{Custom Braces}, for how to use a function as a brace hanging @var{action}. The list @var{action} (or the list returned by @var{action} when it's a function) contains some combination of the symbols @code{before} and @code{after}, directing @ccmode{} where to put newlines in relationship to the brace being inserted. Thus, if the list contains only the symbol @code{after}, then the brace hangs on the right side of the line, as in: @example // here, open braces always 'hang' void spam( int i ) @{ if( i == 7 ) @{ dosomething(i); @} @} @end example When the list contains both @code{after} and @code{before}, the braces will appear on a line by themselves, as shown by the close braces in the above example. The list can also be empty, in which case newlines are added neither before nor after the brace. @end table If a syntactic symbol is missing entirely from @code{c-hanging-braces-alist}, it's treated in the same way as an @var{action} with a list containing @code{before} and @code{after}, so that braces by default end up on their own line. For example, the default value of @code{c-hanging-braces-alist} is: @example ((brace-list-open) (brace-entry-open) (statement-cont) (substatement-open after) (block-close . c-snug-do-while) (extern-lang-open after) (namespace-open after) (module-open after) (composition-open after) (inexpr-class-open after) (inexpr-class-close before)) @end example @noindent which says that @code{brace-list-open}, @code{brace-entry-open} and @code{statement-cont}@footnote{Brace lists inside statements, such as initializers for static array variables inside functions in C, are recognized as @code{statement-cont}. All normal substatement blocks are recognized with other symbols.} braces should both hang on the right side and allow subsequent text to follow on the same line as the brace. Also, @code{substatement-open}, @code{extern-lang-open}, and @code{inexpr-class-open} braces should hang on the right side, but subsequent text should follow on the next line. The opposite holds for @code{inexpr-class-close} braces; they won't hang, but the following text continues on the same line. Here, in the @code{block-close} entry, you also see an example of using a function as an @var{action}. In all other cases, braces are put on a line by themselves. @end defopt @menu * Custom Braces:: @end menu @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Custom Braces @subsection Custom Brace Hanging @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @vindex c-hanging-braces-alist @vindex hanging-braces-alist @r{(c-)} @cindex action functions Syntactic symbols aren't the only place where you can customize @ccmode{} with the lisp equivalent of callback functions. Remember that @var{action}s are usually a list containing some combination of the symbols @code{before} and @code{after} (@pxref{Hanging Braces}). For more flexibility, you can instead specify brace ``hanginess'' by giving a syntactic symbol an @dfn{action function} in @code{c-hanging-braces-alist}; this function determines the ``hanginess'' of a brace, usually by looking at the code near it. @cindex customization, brace hanging An action function is called with two arguments: the syntactic symbol for the brace (e.g., @code{substatement-open}), and the buffer position where the brace has been inserted. Point is undefined on entry to an action function, but the function must preserve it (e.g., by using @code{save-excursion}). The return value should be a list containing some combination of @code{before} and @code{after}, including neither of them (i.e., @code{nil}). @defvar c-syntactic-context @vindex syntactic-context @r{(c-)} During the call to the indentation or brace hanging @var{action} function, this variable is bound to the full syntactic analysis list. This might be, for example, @samp{((block-close 73))}. Don't ever give @code{c-syntactic-context} a value yourself---this would disrupt the proper functioning of @ccmode{}. This variable is also bound in three other circumstances: (i)@w{ }when calling a c-hanging-semi&comma-criteria function (@pxref{Hanging Semicolons and Commas}); (ii)@w{ }when calling a line-up function (@pxref{Custom Line-Up}); (iii)@w{ }when calling a c-special-indent-hook function (@pxref{Other Indentation}). @end defvar As an example, @ccmode{} itself uses this feature to dynamically determine the hanginess of braces which close ``do-while'' constructs: @example void do_list( int count, char** atleast_one_string ) @{ int i=0; do @{ handle_string( atleast_one_string[i] ); i++; @} while( i < count ); @} @end example @ccmode{} assigns the @code{block-close} syntactic symbol to the brace that closes the @code{do} construct, and normally we'd like the line that follows a @code{block-close} brace to begin on a separate line. However, with ``do-while'' constructs, we want the @code{while} clause to follow the closing brace. To do this, we associate the @code{block-close} symbol with the @var{action} function @code{c-snug-do-while}: @example (defun c-snug-do-while (syntax pos) "Dynamically calculate brace hanginess for do-while statements." (save-excursion (let (langelem) (if (and (eq syntax 'block-close) (setq langelem (assq 'block-close c-syntactic-context)) (progn (goto-char (cdr langelem)) (if (= (following-char) ?@{) (forward-sexp -1)) (looking-at "\\[^_]"))) '(before) '(before after))))) @end example @findex c-snug-do-while @findex snug-do-while @r{(c-)} This function simply looks to see if the brace closes a ``do-while'' clause and if so, returns the list @samp{(before)} indicating that a newline should be inserted before the brace, but not after it. In all other cases, it returns the list @samp{(before after)} so that the brace appears on a line by itself. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Hanging Colons @section Hanging Colons @cindex hanging colons @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @cindex customization, colon hanging @vindex c-hanging-colons-alist @vindex hanging-colons-alist @r{(c-)} Using a mechanism similar to brace hanging (@pxref{Hanging Braces}), colons can also be made to hang using the style variable @code{c-hanging-colons-alist}: when a colon is typed, @ccmode determines its syntactic context, looks this up in the alist @code{c-changing-colons-alist} and inserts up to two newlines accordingly. Here, however, If @ccmode fails to find an entry for a syntactic symbol in the alist, no newlines are inserted around the newly typed colon. @defopt c-hanging-colons-alist @vindex hanging-colons-alist @r{(c-)} @table @asis @item The Key: the syntactic symbol The syntactic symbols appropriate as keys in this association list are: @code{case-label}, @code{label}, @code{access-label}, @code{member-init-intro}, and @code{inher-intro}. @xref{Syntactic Symbols}. Elements with any other value as a key get ignored. @item The associated value: the ``ACTION'' list The @var{action} here is simply a list containing a combination of the symbols @code{before} and @code{after}. Unlike in @code{c-hanging-braces-alist}, functions as @var{actions} are not supported; there doesn't seem to be any need for them. @end table @end defopt In C++, double-colons are used as a scope operator but because these colons always appear right next to each other, newlines before and after them are controlled by a different mechanism, called @dfn{clean-ups} in @ccmode{}. @xref{Clean-ups}, for details. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Hanging Semicolons and Commas @section Hanging Semicolons and Commas @cindex hanging semicolons @cindex hanging commas @cindex customization, semicolon newlines @cindex customization, comma newlines @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @defopt c-hanging-semi&comma-criteria @vindex hanging-semi&comma-criteria @r{(c-)} This style variable takes a list of functions; these get called when you type a semicolon or comma. The functions are called in order without arguments. When these functions are entered, point is just after the newly inserted @samp{;} or @samp{,} and they must preserve point (e.g., by using @code{save-excursion}). During the call, the variable @code{c-syntactic-context} is bound to the syntactic context of the current line@footnote{This was first introduced in @ccmode{} 5.31.} @pxref{Custom Braces}. These functions don't insert newlines themselves, rather they direct @ccmode{} whether or not to do so. They should return one of the following values: @table @code @item t A newline is to be inserted after the @samp{;} or @samp{,}, and no more functions from the list are to be called. @item stop No more functions from the list are to be called, and no newline is to be inserted. @item nil No determination has been made, and the next function in the list is to be called. @end table Note that auto-newlines are never inserted @emph{before} a semicolon or comma. If every function in the list is called without a determination being made, then no newline is added. In AWK mode, this variable is set by default to @code{nil}. In the other modes, the default value is a list containing a single function, @code{c-semi&comma-inside-parenlist}. This inserts newlines after all semicolons, apart from those separating @code{for}-clause statements. @end defopt @defun c-semi&comma-no-newlines-before-nonblanks @findex semi&comma-no-newlines-before-nonblanks @r{(c-)} This is an example of a criteria function, provided by @ccmode{}. It prevents newlines from being inserted after semicolons when there is a non-blank following line. Otherwise, it makes no determination. To use, add this function to the front of the @code{c-hanging-semi&comma-criteria} list. @example (defun c-semi&comma-no-newlines-before-nonblanks () (save-excursion (if (and (= (c-last-command-char) ?\;) (zerop (forward-line 1)) (bolp) ; forward-line has funny behavior at eob. (not (looking-at "^[ \t]*$"))) 'stop nil))) @end example @end defun @defun c-semi&comma-inside-parenlist @findex semi&comma-inside-parenlist @r{(c-)} @defunx c-semi&comma-no-newlines-for-oneline-inliners @findex semi&comma-no-newlines-for-oneline-inliners @r{(c-)} The function @code{c-semi&comma-inside-parenlist} is what prevents newlines from being inserted inside the parenthesis list of @code{for} statements. In addition to @code{c-semi&comma-no-newlines-before-nonblanks} described above, @ccmode{} also comes with the criteria function @code{c-semi&comma-no-newlines-for-oneline-inliners}, which suppresses newlines after semicolons inside one-line inline method definitions (e.g., in C++ or Java). @end defun @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Clean-ups @chapter Clean-ups @cindex clean-ups @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @dfn{Clean-ups} are mechanisms which remove (or exceptionally, add) whitespace in specific circumstances and are complementary to colon and brace hanging. You enable a clean-up by adding its symbol into @code{c-cleanup-list}, e.g., like this: @example (add-to-list 'c-cleanup-list 'space-before-funcall) @end example On the surface, it would seem that clean-ups overlap the functionality provided by the @code{c-hanging-*-alist} variables. Clean-ups, however, are used to adjust code ``after-the-fact'', i.e., to adjust the whitespace in constructs later than when they were typed. Most of the clean-ups remove automatically inserted newlines, and are only active when auto-newline minor mode is turned on. Others will work all the time. Note that clean-ups are only performed when there is nothing but whitespace appearing between the individual components of the construct, and (apart from @code{comment-close-slash}) when the construct does not occur within a literal (@pxref{Auto-newlines}). @defopt c-cleanup-list @vindex cleanup-list @r{(c-)} @cindex literal You configure @ccmode{}'s clean-ups by setting the style variable @code{c-cleanup-list}, which is a list of clean-up symbols. By default, @ccmode{} cleans up only the @code{scope-operator} construct, which is necessary for proper C++ support. @end defopt These are the clean-ups that are only active when electric and auto-newline minor modes are enabled: @c TBD: Would like to use some sort of @deffoo here; @table indents a @c bit too much in dvi output. @table @code @item brace-else-brace Clean up @samp{@} else @{} constructs by placing the entire construct on a single line. Clean up occurs when the open brace after the @samp{else} is typed. So for example, this: @example @group void spam(int i) @{ if( i==7 ) @{ dosomething(); @} else @{ @end group @end example @noindent appears like this after the last open brace is typed: @example @group void spam(int i) @{ if( i==7 ) @{ dosomething(); @} else @{ @end group @end example @item brace-elseif-brace Similar to the @code{brace-else-brace} clean-up, but this cleans up @samp{@} else if (...) @{} constructs. For example: @example @group void spam(int i) @{ if( i==7 ) @{ dosomething(); @} else if( i==3 ) @{ @end group @end example @noindent appears like this after the last open parenthesis is typed: @example @group void spam(int i) @{ if( i==7 ) @{ dosomething(); @} else if( @end group @end example @noindent and like this after the last open brace is typed: @example @group void spam(int i) @{ if( i==7 ) @{ dosomething(); @} else if( i==3 ) @{ @end group @end example @item brace-catch-brace Analogous to @code{brace-elseif-brace}, but cleans up @samp{@} catch (...) @{} in C++ and Java mode. @item empty-defun-braces Clean up braces following a top-level function or class definition that contains no body. Clean up occurs when the closing brace is typed. Thus the following: @example @group class Spam @{ @} @end group @end example @noindent is transformed into this when the close brace is typed: @example @group class Spam @{@} @end group @end example @item defun-close-semi Clean up the terminating semicolon on top-level function or class definitions when they follow a close brace. Clean up occurs when the semicolon is typed. So for example, the following: @example @group class Spam @{ ... @} ; @end group @end example @noindent is transformed into this when the semicolon is typed: @example @group class Spam @{ ... @}; @end group @end example @item list-close-comma Clean up commas following braces in array and aggregate initializers. Clean up occurs when the comma is typed. The space before the comma is zapped just like the space before the semicolon in @code{defun-close-semi}. @item scope-operator Clean up double colons which might designate a C++ scope operator split across multiple lines@footnote{Certain C++ constructs introduce ambiguous situations, so @code{scope-operator} clean-ups might not always be correct. This usually only occurs when scoped identifiers appear in switch label tags.}. Clean up occurs when the second colon is typed. You will always want @code{scope-operator} in the @code{c-cleanup-list} when you are editing C++ code. @item one-liner-defun Clean up a single line of code enclosed by defun braces by removing the whitespace before and after the code. The clean-up happens when the closing brace is typed. If the variable @code{c-max-one-liner-length} is set, the cleanup is only done if the resulting line would be no longer than the value of that variable. For example, consider this AWK code: @example @group BEGIN @{ FS = "\t" # use as a field separator @} @end group @end example @noindent It gets compacted to the following when the closing brace is typed: @example @group BEGIN @{FS = "\t"@} # use as a field separator @end group @end example @defopt c-max-one-liner-length @vindex max-one-liner-length @r{(c-)} The maximum length of the resulting line for which the clean-up @code{one-liner-defun} will be triggered. This length is that of the entire line, including any leading whitespace and any trailing comment. Its default value is 80. If the value is zero or @code{nil}, no limit applies. @end defopt @end table The following clean-ups are always active when they occur on @code{c-cleanup-list}, regardless of whether Electric minor mode or Auto-newline minor mode are enabled: @table @code @item space-before-funcall Insert a space between the function name and the opening parenthesis of a function call. This produces function calls in the style mandated by the GNU coding standards, e.g., @samp{signal@w{ }(SIGINT, SIG_IGN)} and @samp{abort@w{ }()}. Clean up occurs when the opening parenthesis is typed. This clean-up should never be active in AWK Mode, since such a space is syntactically invalid for user defined functions. @item compact-empty-funcall Clean up any space between the function name and the opening parenthesis of a function call that has no arguments. This is typically used together with @code{space-before-funcall} if you prefer the GNU function call style for functions with arguments but think it looks ugly when it's only an empty parenthesis pair. I.e., you will get @samp{signal (SIGINT, SIG_IGN)}, but @samp{abort()}. Clean up occurs when the closing parenthesis is typed. @item comment-close-slash When inside a block comment, terminate the comment when you type a slash at the beginning of a line (i.e., immediately after the comment prefix). This clean-up removes whitespace preceding the slash and if needed, inserts a star to complete the token @samp{*/}. Type @kbd{C-q /} in this situation if you just want a literal @samp{/} inserted. @end table @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Indentation Engine Basics @chapter Indentation Engine Basics @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! This chapter will briefly cover how @ccmode{} indents lines of code. It is helpful to understand the indentation model being used so that you will know how to customize @ccmode{} for your personal coding style. All the details are in @ref{Customizing Indentation}. @ccmode{} has an indentation engine that provides a flexible and general mechanism for customizing indentation. When @ccmode{} indents a line of code, it separates its calculations into two steps: @enumerate @item @cindex syntactic symbol @cindex anchor position It analyzes the line to determine its @dfn{syntactic symbol(s)} (the kind of language construct it's looking at) and its @dfn{anchor position} (the position earlier in the file that @ccmode{} will indent the line relative to). The anchor position might be the location of an opening brace in the previous line, for example. @xref{Syntactic Analysis}. @item @cindex offsets @cindex indentation offset specifications It looks up the syntactic symbol(s) in the configuration to get the corresponding @dfn{offset(s)}. The symbol @code{+}, which means ``indent this line one more level'' is a typical offset. @ccmode{} then applies these offset(s) to the anchor position, giving the indentation for the line. The different sorts of offsets are described in @ref{c-offsets-alist}. @end enumerate In exceptional circumstances, the syntax directed indentation described here may be a nuisance rather than a help. You can disable it by setting @code{c-syntactic-indentation} to @code{nil}. (To set the variable interactively, @ref{Minor Modes}). @defopt c-syntactic-indentation @vindex syntactic-indentation @r{(c-)} When this is non-@code{nil} (which it is by default), the indentation of code is done according to its syntactic structure. When it's @code{nil}, every line is just indented to the same level as the previous one, and @kbd{TAB} (@code{c-indent-command}) adjusts the indentation in steps of @code{c-basic-offset}. The current style (@pxref{Config Basics}) then has no effect on indentation, nor do any of the variables associated with indentation, not even @code{c-special-indent-hook}. @end defopt @menu * Syntactic Analysis:: * Syntactic Symbols:: * Indentation Calculation:: @end menu @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Syntactic Analysis @section Syntactic Analysis @cindex syntactic analysis @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @cindex syntactic element @cindex syntactic context The first thing @ccmode{} does when indenting a line of code, is to analyze the line by calling @code{c-guess-basic-syntax}, determining the syntactic context of the (first) construct on that line. Although this function is mainly used internally, it can sometimes be useful in Line-up functions (@pxref{Custom Line-Up}) or in functions on @code{c-special-indent-hook} (@pxref{Other Indentation}). @defun c-guess-basic-syntax @findex guess-basic-syntax @r{(c-)} Determine the syntactic context of the current line. @end defun The @dfn{syntactic context} is a list of @dfn{syntactic elements}, where each syntactic element in turn is a list@footnote{In @ccmode 5.28 and earlier, a syntactic element was a dotted pair; the cons was the syntactic symbol and the cdr was the anchor position. For compatibility's sake, the parameter passed to a line-up function still has this dotted pair form (@pxref{Custom Line-Up}).} Here is a brief and typical example: @example ((defun-block-intro 1959)) @end example @cindex syntactic symbol @noindent The first thing inside each syntactic element is always a @dfn{syntactic symbol}. It describes the kind of construct that was recognized, e.g., @code{statement}, @code{substatement}, @code{class-open}, @code{class-close}, etc. @xref{Syntactic Symbols}, for a complete list of currently recognized syntactic symbols and their semantics. The remaining entries are various data associated with the recognized construct; there might be zero or more. @cindex anchor position Conceptually, a line of code is always indented relative to some position higher up in the buffer (typically the indentation of the previous line). That position is the @dfn{anchor position} in the syntactic element. If there is an entry after the syntactic symbol in the syntactic element list then it's either @code{nil} or that anchor position. Here is an example. Suppose we had the following code as the only thing in a C++ buffer @footnote{The line numbers in this and future examples don't actually appear in the buffer, of course!}: @example 1: void swap( int& a, int& b ) 2: @{ 3: int tmp = a; 4: a = b; 5: b = tmp; 6: @} @end example @noindent We can use @kbd{C-c C-s} (@code{c-show-syntactic-information}) to report what the syntactic analysis is for the current line: @table @asis @item @kbd{C-c C-s} (@code{c-show-syntactic-information}) @kindex C-c C-s @findex c-show-syntactic-information @findex show-syntactic-information @r{(c-)} This command calculates the syntactic analysis of the current line and displays it in the minibuffer. The command also highlights the anchor position(s). @end table Running this command on line 4 of this example, we'd see in the echo area@footnote{With a universal argument (i.e., @kbd{C-u C-c C-s}) the analysis is inserted into the buffer as a comment on the current line.}: @example ((statement 35)) @end example @noindent and the @samp{i} of @code{int} on line 3 would be highlighted. This tells us that the line is a statement and it is indented relative to buffer position 35, the highlighted position. If you were to move point to line 3 and hit @kbd{C-c C-s}, you would see: @example ((defun-block-intro 29)) @end example @noindent This indicates that the @samp{int} line is the first statement in a top level function block, and is indented relative to buffer position 29, which is the brace just after the function header. Here's another example: @example 1: int add( int val, int incr, int doit ) 2: @{ 3: if( doit ) 4: @{ 5: return( val + incr ); 6: @} 7: return( val ); 8: @} @end example @noindent Hitting @kbd{C-c C-s} on line 4 gives us: @example ((substatement-open 46)) @end example @cindex substatement @cindex substatement block @noindent which tells us that this is a brace that @emph{opens} a substatement block.@footnote{A @dfn{substatement} is the line after a conditional statement, such as @code{if}, @code{else}, @code{while}, @code{do}, @code{switch}, etc. A @dfn{substatement block} is a brace block following one of these conditional statements.} @cindex comment-only line Syntactic contexts can contain more than one element, and syntactic elements need not have anchor positions. The most common example of this is a @dfn{comment-only line}: @example 1: void draw_list( List& drawables ) 2: @{ 3: // call the virtual draw() method on each element in list 4: for( int i=0; i < drawables.count(), ++i ) 5: @{ 6: drawables[i].draw(); 7: @} 8: @} @end example @noindent Hitting @kbd{C-c C-s} on line 3 of this example gives: @example ((comment-intro) (defun-block-intro 46)) @end example @noindent and you can see that the syntactic context contains two syntactic elements. Notice that the first element, @samp{(comment-intro)}, has no anchor position. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Syntactic Symbols @section Syntactic Symbols @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @cindex syntactic symbols, brief list @vindex c-offsets-alist @vindex offsets-alist @r{(c-)} This section is a complete list of the syntactic symbols which appear in the @code{c-offsets-alist} style variable, along with brief descriptions. The previous section (@pxref{Syntactic Analysis}) states what syntactic symbols are and how the indentation engine uses them. More detailed descriptions of these symbols, together with snippets of source code to which they apply, appear in the examples in the subsections below. Note that, in the interests of brevity, the anchor position associated with most syntactic symbols is @emph{not} specified. In cases of doubt, type @kbd{C-c C-s} on a pertinent line---this highlights the anchor position. @ssindex -open symbols @ssindex -close symbols @ssindex -block-intro symbols The syntactic symbols which indicate brace constructs follow a general naming convention. When a line begins with an open or close brace, its syntactic symbol will contain the suffix @code{-open} or @code{-close} respectively. The first line within the brace block construct will contain the suffix @code{-block-intro}. @ssindex -intro symbols @ssindex -cont symbols In constructs which can span several lines, a distinction is usually made between the first line that introduces the construct and the lines that continue it. The syntactic symbols that indicate these lines will contain the suffixes @code{-intro} or @code{-cont} respectively. The best way to understand how all this works is by looking at some examples. Remember that you can see the syntax of any source code line by using @kbd{C-c C-s}. @table @code @item string Inside a multiline string. @ref{Literal Symbols}. @item c Inside a multiline C style block comment. @ref{Literal Symbols}. @item defun-open Brace that opens a top-level function definition. @ref{Function Symbols}. @item defun-close Brace that closes a top-level function definition. @ref{Function Symbols}. @item defun-block-intro The first line in a top-level defun. @ref{Function Symbols}. @item class-open Brace that opens a class definition. @ref{Class Symbols}. @item class-close Brace that closes a class definition. @ref{Class Symbols}. @item inline-open Brace that opens an in-class inline method. @ref{Class Symbols}. @item inline-close Brace that closes an in-class inline method. @ref{Class Symbols}. @item func-decl-cont The region between a function definition's argument list and the function opening brace (excluding K&R argument declarations). In C, you cannot put anything but whitespace and comments in this region, however in C++ and Java, @code{throws} declarations and other things can appear here. @ref{Literal Symbols}. @c @emph{FIXME!!! Can it not @c go somewhere better?} @item knr-argdecl-intro First line of a K&R C argument declaration. @ref{K&R Symbols}. @item knr-argdecl Subsequent lines in a K&R C argument declaration. @ref{K&R Symbols}. @item topmost-intro The first line in a ``topmost'' definition. @ref{Function Symbols}. @item topmost-intro-cont Topmost definition continuation lines. This is only used in the parts that aren't covered by other symbols such as @code{func-decl-cont} and @code{knr-argdecl}. @ref{Function Symbols}. @item constraint-cont Continuation line of a topmost C++20 concept or requires clause. @ref{Constraint Symbols}. @item annotation-top-cont Topmost definition continuation lines where all previous items are annotations. @ref{Java Symbols}. @item member-init-intro First line in a member initialization list. @ref{Class Symbols}. @item member-init-cont Subsequent member initialization list lines. @ref{Class Symbols}. @item inher-intro First line of a multiple inheritance list. @ref{Class Symbols}. @item inher-cont Subsequent multiple inheritance lines. @ref{Class Symbols}. @item block-open Statement block open brace. @ref{Literal Symbols}. @item block-close Statement block close brace. @ref{Conditional Construct Symbols}. @item brace-list-open Open brace of an enum or static array list. @ref{Brace List Symbols}. @item brace-list-close Close brace of an enum or static array list. @ref{Brace List Symbols}. @item brace-list-intro First line after the opening @samp{@{} in an enum or static array list. @ref{Brace List Symbols}. @item brace-list-entry Subsequent lines in an enum or static array list. @ref{Brace List Symbols}. @item brace-entry-open Subsequent lines in an enum or static array list where the line begins with an open brace. @ref{Brace List Symbols}. @item statement A statement, including `for' clauses except if @code{c-for-clauses-as-arglist} is true. @ref{Function Symbols}. @item statement-cont A continuation of a statement. @ref{Function Symbols}. @item annotation-var-cont A continuation of a statement where all previous items are annotations. @ref{Java Symbols}. @item statement-block-intro The first line in a new statement block. @ref{Conditional Construct Symbols}. @item statement-case-intro The first line in a case block. @ref{Switch Statement Symbols}. @item statement-case-open The first line in a case block that starts with a brace. @ref{Switch Statement Symbols}. @item substatement The first line after a conditional or loop construct. @ref{Conditional Construct Symbols}. @item substatement-open The brace that opens a substatement block. @ref{Conditional Construct Symbols}. @item substatement-label The first line after a conditional or loop construct if it's a label. @ref{Conditional Construct Symbols}. @item case-label A label in a @code{switch} block. @ref{Switch Statement Symbols}. @item access-label C++ access control label. @ref{Class Symbols}. @item label Any other label. @ref{Literal Symbols}. @item do-while-closure The @code{while} line that ends a @code{do}-@code{while} construct. @ref{Conditional Construct Symbols}. @item else-clause The @code{else} line of an @code{if}-@code{else} construct. @ref{Conditional Construct Symbols}. @item catch-clause The @code{catch} or @code{finally} (in Java) line of a @code{try}-@code{catch} construct. @ref{Conditional Construct Symbols}. @item comment-intro A line containing only a comment introduction. @ref{Literal Symbols}. @item arglist-intro The first line in an argument list or a parenthesized expression. Note that @code{for} clauses are rather considered statements (or their continuation) except if @code{c-for-clauses-as-arglist} is true. @ref{Paren List Symbols}. @item arglist-cont Subsequent argument list lines when no arguments follow on the same line as the arglist opening paren. Same remark concerning @code{for} clauses as for @code{arglist-intro} above. @ref{Paren List Symbols}. @item arglist-cont-nonempty Subsequent argument list lines when at least one argument follows on the same line as the arglist opening paren. Same remark concerning @code{for} clauses as for @code{arglist-intro} above. @ref{Paren List Symbols}. @item arglist-close The solo close paren of an argument list or a @code{for} clause. @ref{Paren List Symbols}. @item stream-op Lines continuing a stream operator (C++ only). @ref{Literal Symbols}. @c @emph{FIXME!!! Can this not be moved somewhere better?} @item inclass The line is nested inside a class definition. @ref{Class Symbols}. @item cpp-macro The start of a preprocessor macro definition. @ref{Literal Symbols}. @item cpp-define-intro The first line inside a multiline preprocessor macro if @code{c-syntactic-indentation-in-macros} is set. @ref{Multiline Macro Symbols}. @item cpp-macro-cont All lines inside multiline preprocessor macros if @code{c-syntactic-indentation-in-macros} is @code{nil}. @ref{Multiline Macro Symbols}. @item friend A C++ friend declaration. @ref{Class Symbols}. @item objc-method-intro The first line of an Objective-C method definition. @ref{Objective-C Method Symbols}. @item objc-method-args-cont Lines continuing an Objective-C method definition. @ref{Objective-C Method Symbols}. @item objc-method-call-cont Lines continuing an Objective-C method call. @ref{Objective-C Method Symbols}. @item extern-lang-open Brace that opens an @code{extern} block (e.g., @code{extern "C" @{...@}}). @ref{External Scope Symbols}. @item extern-lang-close Brace that closes an @code{extern} block. @ref{External Scope Symbols}. @item inextern-lang Analogous to @code{inclass} syntactic symbol, but used inside @code{extern} blocks. @ref{External Scope Symbols}. @item namespace-open @itemx namespace-close @itemx innamespace These are analogous to the three @code{extern-lang} symbols above, but are returned for C++ namespace blocks. @ref{External Scope Symbols}. @item module-open @itemx module-close @itemx inmodule Analogous to the above, but for CORBA IDL @code{module} blocks. @ref{External Scope Symbols}. @item composition-open @itemx composition-close @itemx incomposition Analogous to the above, but for CORBA CIDL @code{composition} blocks. @ref{External Scope Symbols}. @item template-args-cont C++ template argument list continuations. @ref{Class Symbols}. @item inlambda Analogous to @code{inclass} syntactic symbol, but used inside lambda (i.e., anonymous) functions. Used in C++ and Pike modes. @ref{Statement Block Symbols}. @item lambda-intro-cont Lines continuing the header of a lambda function, i.e., between the @code{lambda} keyword and the function body. Only used in Pike mode. @ref{Statement Block Symbols}. @item inexpr-statement A statement block inside an expression. The gcc C and C++ extension for this is recognized. It's also used for the special functions that take a statement block as an argument in Pike. @ref{Statement Block Symbols}. @item inexpr-class A class definition inside an expression. This is used for anonymous classes in Java. It's also used for anonymous array initializers in Java. @ref{Java Symbols}. @end table @menu * Function Symbols:: * Class Symbols:: * Conditional Construct Symbols:: * Switch Statement Symbols:: * Brace List Symbols:: * External Scope Symbols:: * Paren List Symbols:: * Literal Symbols:: * Multiline Macro Symbols:: * Objective-C Method Symbols:: * Java Symbols:: * Constraint Symbols:: * Statement Block Symbols:: * K&R Symbols:: @end menu @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Function Symbols @subsection Function Symbols @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! This example shows a typical function declaration. @example 1: void 2: swap( int& a, int& b ) 3: @{ 4: int tmp = a; 5: a = b; 6: b = tmp; 7: int ignored = 8: a + b; 9: @} @end example @ssindex topmost-intro @ssindex topmost-intro-cont @ssindex defun-open @ssindex defun-close @ssindex defun-block-intro Line 1 shows a @code{topmost-intro} since it is the first line that introduces a top-level construct. Line 2 is a continuation of the top-level construct introduction so it has the syntax @code{topmost-intro-cont}. Line 3 shows a @code{defun-open} since it is the brace that opens a top-level function definition. Line 9 is the corresponding @code{defun-close} since it contains the brace that closes the top-level function definition. Line 4 is a @code{defun-block-intro}, i.e., it is the first line of a brace-block, enclosed in a top-level function definition. @ssindex statement @ssindex statement-cont Lines 5, 6, and 7 are all given @code{statement} syntax since there isn't much special about them. Note however that line 8 is given @code{statement-cont} syntax since it continues the statement begun on the previous line. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Class Symbols @subsection Class related Symbols @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Here's an example which illustrates some C++ class syntactic symbols: @example 1: class Bass 2: : public Guitar, 3: public Amplifiable 4: @{ 5: public: 6: Bass() 7: : eString( new BassString( 0.105 )), 8: aString( new BassString( 0.085 )), 9: dString( new BassString( 0.065 )), 10: gString( new BassString( 0.045 )) 11: @{ 12: eString.tune( 'E' ); 13: aString.tune( 'A' ); 14: dString.tune( 'D' ); 15: gString.tune( 'G' ); 16: @} 17: friend class Luthier; 18: @}; @end example @ssindex class-open @ssindex class-close As in the previous example, line 1 has the @code{topmost-intro} syntax. Here however, the brace that opens a C++ class definition on line 4 is assigned the @code{class-open} syntax. Note that in C++, classes, structs, and unions are essentially equivalent syntactically (and are very similar semantically), so replacing the @code{class} keyword in the example above with @code{struct} or @code{union} would still result in a syntax of @code{class-open} for line 4 @footnote{This is the case even for C and Objective-C@. For consistency, structs in all supported languages are syntactically equivalent to classes. Note however that the keyword @code{class} is meaningless in C and Objective-C.}. Similarly, line 18 is assigned @code{class-close} syntax. @ssindex inher-intro @ssindex inher-cont Line 2 introduces the inheritance list for the class so it is assigned the @code{inher-intro} syntax, and line 3, which continues the inheritance list is given @code{inher-cont} syntax. @ssindex access-label @ssindex inclass Hitting @kbd{C-c C-s} on line 5 shows the following analysis: @example ((inclass 58) (access-label 58)) @end example @noindent The primary syntactic symbol for this line is @code{access-label} as this is a label keyword that specifies access protection in C++. However, because this line is also a top-level construct inside a class definition, the analysis actually shows two syntactic symbols. The other syntactic symbol assigned to this line is @code{inclass}. Similarly, line 6 is given both @code{inclass} and @code{topmost-intro} syntax: @example ((inclass 58) (topmost-intro 60)) @end example @ssindex member-init-intro @ssindex member-init-cont Line 7 introduces a C++ member initialization list and as such is given @code{member-init-intro} syntax. Note that in this case it is @emph{not} assigned @code{inclass} since this is not considered a top-level construct. Lines 8 through 10 are all assigned @code{member-init-cont} since they continue the member initialization list started on line 7. @cindex in-class inline methods @ssindex inline-open @ssindex inline-close Line 11's analysis is a bit more complicated: @example ((inclass 58) (inline-open)) @end example This line is assigned a syntax of both @code{inline-open} and @code{inclass} because it opens an @dfn{in-class} C++ inline method definition. This is distinct from, but related to, the C++ notion of an inline function in that its definition occurs inside an enclosing class definition, which in C++ implies that the function should be inlined. However, if the definition of the @code{Bass} constructor appeared outside the class definition, the construct would be given the @code{defun-open} syntax, even if the keyword @code{inline} appeared before the method name, as in: @example 1: class Bass 2: : public Guitar, 3: public Amplifiable 4: @{ 5: public: 6: Bass(); 7: @}; 8: 9: inline 10: Bass::Bass() 11: : eString( new BassString( 0.105 )), 12: aString( new BassString( 0.085 )), 13: dString( new BassString( 0.065 )), 14: gString( new BassString( 0.045 )) 15: @{ 16: eString.tune( 'E' ); 17: aString.tune( 'A' ); 18: dString.tune( 'D' ); 19: gString.tune( 'G' ); 20: @} @end example @ssindex friend Returning to the previous example, line 16 is given @code{inline-close} syntax, while line 12 is given @code{defun-block-open} syntax, and lines 13 through 15 are all given @code{statement} syntax. Line 17 is interesting in that its syntactic analysis list contains three elements: @example ((inclass 58) (topmost-intro 380) (friend)) @end example The @code{friend} and @code{inline-open} syntactic symbols are modifiers that do not have anchor positions. @ssindex template-args-cont Template definitions introduce yet another syntactic symbol: @example 1: ThingManager framework_callbacks; @end example Here, line 1 is analyzed as a @code{topmost-intro}, but lines 2 and 3 are both analyzed as @code{template-args-cont} lines. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Conditional Construct Symbols @subsection Conditional Construct Symbols @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Here is a (totally contrived) example which illustrates how syntax is assigned to various conditional constructs: @example 1: void spam( int index ) 2: @{ 3: for( int i=0; i 0 ); 15: @} @end example Only the lines that illustrate new syntactic symbols will be discussed. @ssindex substatement-open @ssindex statement-block-intro @ssindex block-close Line 4 has a brace which opens a conditional's substatement block. It is thus assigned @code{substatement-open} syntax, and since line 5 is the first line in the substatement block, it is assigned @code{statement-block-intro} syntax. Line 10 contains the brace that closes the inner substatement block, and is therefore given the syntax @code{block-close}@footnote{@code{block-open} is used only for ``free-standing'' blocks, and is somewhat rare (@pxref{Literal Symbols} for an example.)}. Line 13 is treated the same way. @ssindex substatement Lines 6 and 9 are also substatements of conditionals, but since they don't start blocks they are given @code{substatement} syntax instead of @code{substatement-open}. @ssindex substatement-label Line 8 contains a label, which is normally given @code{label} syntax. This one is however a bit special since it's between a conditional and its substatement. It's analyzed as @code{substatement-label} to let you handle this rather odd case differently from normal labels. @ssindex else-clause @ssindex catch-clause Line 7 start with an @code{else} that matches the @code{if} statement on line 5. It is therefore given the @code{else-clause} syntax and is anchored on the matching @code{if}. The @code{try}-@code{catch} constructs in C++ and Java are treated this way too, except that @code{catch} and (in Java) @code{finally}, are marked with @code{catch-clause}. @ssindex do-while-closure The @code{while} construct on line 14 that closes a @code{do} conditional is given the special syntax @code{do-while-closure} if it appears on a line by itself. Note that if the @code{while} appeared on the same line as the preceding close brace, that line would still have @code{block-close} syntax. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Switch Statement Symbols @subsection Switch Statement Symbols @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Switch statements have their own set of syntactic symbols. Here's an example: @example 1: void spam( enum Ingredient i ) 2: @{ 3: switch( i ) @{ 4: case Ham: 5: be_a_pig(); 6: break; 7: case Salt: 8: drink_some_water(); 9: break; 10: default: 11: @{ 12: what_is_it(); 13: break; 14: @} 15: @} 14: @} @end example @ssindex case-label @ssindex statement-case-intro @ssindex statement-case-open Here, lines 4, 7, and 10 are all assigned @code{case-label} syntax, while lines 5 and 8 are assigned @code{statement-case-intro}. Line 11 is treated slightly differently since it contains a brace that opens a block; it is given @code{statement-case-open} syntax. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Brace List Symbols @subsection Brace List Symbols @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @cindex brace lists There are a set of syntactic symbols that are used to recognize constructs inside of brace lists. A brace list is defined as an @code{enum} or aggregate initializer list, such as might statically initialize an array of structs. The three special aggregate constructs in Pike, @code{(@{ @})}, @code{([ ])} and @code{(< >)}, are treated as brace lists too. An example: @example 1: static char* ingredients[] = 2: @{ 3: "Ham", 4: "Salt", 5: NULL 6: @}; @end example @ssindex brace-list-open @ssindex brace-list-intro @ssindex brace-list-close @ssindex brace-list-entry Following convention, line 2 in this example is assigned @code{brace-list-open} syntax, and line 3 is assigned @code{brace-list-intro} syntax. Likewise, line 6 is assigned @code{brace-list-close} syntax. Lines 4 and 5 however, are assigned @code{brace-list-entry} syntax, as would all subsequent lines in this initializer list. @ssindex brace-entry-open Your static initializer might be initializing nested structures, for example: @example 1: struct intpairs[] = 2: @{ 3: @{ 1, 2 @}, 4: @{ 5: 3, 6: 4 7: @} 8: @{ 1, 9: 2 @}, 10: @{ 3, 4 @} 11: @}; @end example Here, you've already seen the analysis of lines 1, 2, 3, and 11. On line 4, things get interesting; this line is assigned @code{brace-entry-open} syntactic symbol because it's a bracelist entry line that starts with an open brace. Lines 5 and 6 are pretty standard, and line 7 is a @code{brace-list-close} as you'd expect. Once again, line 8 is assigned as @code{brace-entry-open} as is line 10. Line 9 is assigned two syntactic elements, @code{brace-list-intro} with anchor point at the @samp{@{} of line 8@footnote{This extra syntactic element was introduced in @ccmode{} 5.33.1 to allow extra flexibility in indenting the second line of such a construct. You can preserve the behavior resulting from the former syntactic analysis by giving @code{brace-list-entry} an offset of @code{c-lineup-under-anchor} (@pxref{Misc Line-Up}).}, and @code{brace-list-entry} anchored on the @samp{1} of line 8. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node External Scope Symbols @subsection External Scope Symbols @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! External language definition blocks also have their own syntactic symbols. In this example: @example 1: extern "C" 2: @{ 3: int thing_one( int ); 4: int thing_two( double ); 5: @} @end example @ssindex extern-lang-open @ssindex extern-lang-close @ssindex inextern-lang @ssindex inclass @noindent line 2 is given the @code{extern-lang-open} syntax, while line 5 is given the @code{extern-lang-close} syntax. The analysis for line 3 yields: @example ((inextern-lang) (topmost-intro 14)) @end example @noindent where @code{inextern-lang} is a modifier similar in purpose to @code{inclass}. There are various other top level blocks like @code{extern}, and they are all treated in the same way except that the symbols are named after the keyword that introduces the block. E.g., C++ namespace blocks get the three symbols @code{namespace-open}, @code{namespace-close} and @code{innamespace}. The currently recognized top level blocks are: @table @asis @item @code{extern-lang-open}, @code{extern-lang-close}, @code{inextern-lang} @code{extern} blocks in C and C++.@footnote{These should logically be named @code{extern-open}, @code{extern-close} and @code{inextern}, but that isn't the case for historical reasons.} @item @code{namespace-open}, @code{namespace-close}, @code{innamespace} @ssindex namespace-open @ssindex namespace-close @ssindex innamespace @code{namespace} blocks in C++. @item @code{module-open}, @code{module-close}, @code{inmodule} @ssindex module-open @ssindex module-close @ssindex inmodule @code{module} blocks in CORBA IDL. @item @code{composition-open}, @code{composition-close}, @code{incomposition} @ssindex composition-open @ssindex composition-close @ssindex incomposition @code{composition} blocks in CORBA CIDL. @end table @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Paren List Symbols @subsection Parenthesis (Argument) List Symbols @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! A number of syntactic symbols are associated with parenthesis lists, a.k.a argument lists, as found in function declarations and function calls. This example illustrates these: @example 1: void a_function( int line1, 2: int line2 ); 3: 4: void a_longer_function( 5: int line1, 6: int line2 7: ); 8: 9: void call_them( int line1, int line2 ) 10: @{ 11: a_function( 12: line1, 13: line2 14: ); 15: 16: a_longer_function( line1, 17: line2 ); 18: @} @end example @ssindex arglist-intro @ssindex arglist-close Lines 5 and 12 are assigned @code{arglist-intro} syntax since they are the first line following the open parenthesis, and lines 7 and 14 are assigned @code{arglist-close} syntax since they contain the parenthesis that closes the argument list. @ssindex arglist-cont-nonempty @ssindex arglist-cont Lines that continue argument lists can be assigned one of two syntactic symbols. For example, Lines 2 and 17 are assigned @code{arglist-cont-nonempty} syntax. What this means is that they continue an argument list, but that the line containing the parenthesis that opens the list is @emph{not empty} following the open parenthesis. Contrast this against lines 6 and 13 which are assigned @code{arglist-cont} syntax. This is because the parenthesis that opens their argument lists is the last character on that line. Syntactic elements with @code{arglist-intro}, @code{arglist-cont-nonempty}, and @code{arglist-close} contain two buffer positions: the anchor position (the beginning of the declaration or statement) and the position of the open parenthesis. The latter position can be used in a line-up function (@pxref{Line-Up Functions}). Note that there is no @code{arglist-open} syntax. This is because any parenthesis that opens an argument list, appearing on a separate line, is assigned the @code{statement-cont} syntax instead. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Literal Symbols @subsection Comment String Label and Macro Symbols @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! A few miscellaneous syntactic symbols that haven't been previously covered are illustrated by this C++ example: @example 1: void Bass::play( int volume ) 2: const 3: @{ 4: /* this line starts a multiline 5: * comment. This line should get 'c' syntax */ 6: 7: char* a_multiline_string = "This line starts a multiline \ 8: string. This line should get 'string' syntax."; 9: 10: note: 11: @{ 12: #ifdef LOCK 13: Lock acquire(); 14: #endif // LOCK 15: slap_pop(); 16: cout << "I played " 17: << "a note\n"; 18: @} 19: @} @end example The lines to note in this example include: @itemize @bullet @item @ssindex func-decl-cont Line 2 is assigned the @code{func-decl-cont} syntax. @item @ssindex comment-intro Line 4 is assigned both @code{defun-block-intro} @emph{and} @code{comment-intro} syntax. A syntactic element with @code{comment-intro} has no anchor point. It is always accompanied by another syntactic element which does have one. @item @ssindex c Line 5 is assigned @code{c} syntax. @item @cindex syntactic whitespace Line 6 which, even though it contains nothing but whitespace, is assigned @code{defun-block-intro}. Note that the appearance of the comment on lines 4 and 5 do not cause line 6 to be assigned @code{statement} syntax because comments are considered to be @dfn{syntactic whitespace}, which are ignored when analyzing code. @item @ssindex string Line 8 is assigned @code{string} syntax. @item @ssindex label Line 10 is assigned @code{label} syntax. @item @ssindex block-open Line 11 is assigned @code{block-open} as well as @code{statement} syntax. A @code{block-open} syntactic element doesn't have an anchor position, since it always appears with another syntactic element which does have one. @item @ssindex cpp-macro Lines 12 and 14 are assigned @code{cpp-macro} syntax in addition to the normal syntactic symbols (@code{statement-block-intro} and @code{statement}, respectively). Normally @code{cpp-macro} is configured to cancel out the normal syntactic context to make all preprocessor directives stick to the first column, but that's easily changed if you want preprocessor directives to be indented like the rest of the code. Like @code{comment-intro}, a syntactic element with @code{cpp-macro} doesn't contain an anchor position. @item @ssindex stream-op Line 17 is assigned @code{stream-op} syntax. @end itemize @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Multiline Macro Symbols @subsection Multiline Macro Symbols @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @cindex multiline macros @cindex syntactic whitespace @ssindex cpp-define-intro @ssindex cpp-macro-cont Multiline preprocessor macro definitions are normally handled just like other code, i.e., the lines inside them are indented according to the syntactic analysis of the preceding lines inside the macro. The first line inside a macro definition (i.e., the line after the starting line of the cpp directive itself) gets @code{cpp-define-intro}. In this example: @example 1: #define LIST_LOOP(cons, listp) \ 2: for (cons = listp; !NILP (cons); cons = XCDR (cons)) \ 3: if (!CONSP (cons)) \ 4: signal_error ("Invalid list format", listp); \ 5: else @end example @noindent line 1 is given the syntactic symbol @code{cpp-macro}. The first line of a cpp directive is always given that symbol. Line 2 is given @code{cpp-define-intro}, so that you can give the macro body as a whole some extra indentation. Lines 3 through 5 are then analyzed as normal code, i.e., @code{substatement} on lines 3 and 4, and @code{else-clause} on line 5. The syntactic analysis inside macros can be turned off with @code{c-syntactic-indentation-in-macros} (@pxref{Custom Macros}). In that case, lines 2 through 5 would all be given @code{cpp-macro-cont} with an anchor position pointing to the @code{#} which starts the cpp directive@footnote{This is how @ccmode{} 5.28 and earlier analyzed macros.}. @xref{Custom Macros}, for more info about the treatment of macros. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Objective-C Method Symbols @subsection Objective-C Method Symbols @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! In Objective-C buffers, there are three additional syntactic symbols assigned to various message calling constructs. Here's an example illustrating these: @example 1: - (void)setDelegate:anObject 2: withStuff:stuff 3: @{ 4: [delegate masterWillRebind:self 5: toDelegate:anObject 6: withExtraStuff:stuff]; 7: @} @end example @ssindex objc-method-intro @ssindex objc-method-args-cont @ssindex objc-method-call-cont Here, line 1 is assigned @code{objc-method-intro} syntax, and line 2 is assigned @code{objc-method-args-cont} syntax. Lines 5 and 6 are both assigned @code{objc-method-call-cont} syntax. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Java Symbols @subsection Java Symbols @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Java has a concept of anonymous classes which can look something like this: @example 1: @@Test 2: public void watch(Observable o) @{ 3: @@NonNull 4: Observer obs = new Observer() @{ 5: public void update(Observable o, Object arg) @{ 6: history.addElement(arg); 7: @} 8: @}; 9: o.addObserver(obs); 10: @} @end example @ssindex inexpr-class The brace following the @code{new} operator opens the anonymous class. Lines 5 and 8 are assigned the @code{inexpr-class} syntax, besides the @code{inclass} symbol used in normal classes. Thus, the class will be indented just like a normal class, with the added indentation given to @code{inexpr-class}. An @code{inexpr-class} syntactic element doesn't have an anchor position. @ssindex annotation-top-cont @ssindex annotation-var-cont Line 2 is assigned the @code{annotation-top-cont} syntax, due to it being a continuation of a topmost introduction with an annotation symbol preceding the current line. Similarly, line 4 is assigned the @code{annotation-var-cont} syntax due to it being a continuation of a variable declaration where preceding the declaration is an annotation. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Constraint Symbols @subsection C++ Constraint Symbols @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! The C++20 standard introduced the notion of @dfn{concepts} and @dfn{requirements}, a typical instance of which looks something like this: @example 1: template 2: requires 3: requires (T t) @{ 4: @{ ++t; @} 5: @} 6: && std::is_integral 7: int foo(); @end example @ssindex constraint-cont Line 1 is assigned the familiar @code{topmost-intro}. Line 2 gets @code{topmost-intro-cont}, being the keyword which introduces a @dfn{requires clause}. Lines 3, 6, and 7 are assigned the syntax @code{constraint-cont}, being continuations of the requires clause started on line 2. Lines 4 and 5 get the syntaxes @code{defun-block-intro} and @code{defun-close}, being analyzed as though part of a function. Note that the @code{requires} on Line 3 begins a @dfn{requires expression}, not a a requires clause, hence its components are not assigned @code{constraint-cont}. See @url{https://en.cppreference.com/w/cpp/language/requires}. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Statement Block Symbols @subsection Statement Block Symbols @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! There are a few occasions where a statement block might be used inside an expression. One is in C or C++ code using the gcc extension for this, e.g.: @example 1: int res = (@{ 2: int y = foo (); int z; 3: if (y > 0) z = y; else z = - y; 4: z; 5: @}); @end example @ssindex inexpr-statement Lines 2 and 5 get the @code{inexpr-statement} syntax, besides the symbols they'd get in a normal block. Therefore, the indentation put on @code{inexpr-statement} is added to the normal statement block indentation. An @code{inexpr-statement} syntactic element doesn't contain an anchor position. C++11's lambda expressions involve a block inside a statement. For example: @example 1: std::for_each(someList.begin(), someList.end(), [&total](int x) @{ 2: total += x; 3: @}); @end example Here a lambda expressions begins at the open bracket on line 1 and ends at the closing brace on line 3. Line 2, in addition to the familiar @code{defun-block-intro} syntactic element, is also prefixed by an @code{inlambda} element, which is typically used to indent the entire lambda expression to under the opening bracket. In Pike code, there are a few other situations where blocks occur inside statements, as illustrated here: @example 1: array itgob() 2: @{ 3: string s = map (backtrace()[-2][3..], 4: lambda 5: (mixed arg) 6: @{ 7: return sprintf ("%t", arg); 8: @}) * ", " + "\n"; 9: return catch @{ 10: write (s + "\n"); 11: @}; 12: @} @end example @ssindex inlambda @ssindex lambda-intro-cont Lines 4 through 8 contain a lambda function, which @ccmode{} recognizes by the @code{lambda} keyword. If the function argument list is put on a line of its own, as in line 5, it gets the @code{lambda-intro-cont} syntax. The function body is handled as an inline method body, with the addition of the @code{inlambda} syntactic symbol. This means that line 6 gets @code{inlambda} and @code{inline-open}, and line 8 gets @code{inline-close}@footnote{You might wonder why it doesn't get @code{inlambda} too. It's because the closing brace is relative to the opening brace, which stands on its own line in this example. If the opening brace was hanging on the previous line, then the closing brace would get the @code{inlambda} syntax too to be indented correctly.}. @ssindex inexpr-statement On line 9, @code{catch} is a special function taking a statement block as its argument. The block is handled as an in-expression statement with the @code{inexpr-statement} syntax, just like the gcc extended C example above. The other similar special function, @code{gauge}, is handled like this too. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node K&R Symbols @subsection K&R Symbols @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @ssindex knr-argdecl-intro @ssindex knr-argdecl Two other syntactic symbols can appear in old style, non-prototyped C code @footnote{a.k.a.@: K&R C, or Kernighan & Ritchie C}: @example 1: int add_three_integers(a, b, c) 2: int a; 3: int b; 4: int c; 5: @{ 6: return a + b + c; 7: @} @end example Here, line 2 is the first line in an argument declaration list and so is given the @code{knr-argdecl-intro} syntactic symbol. Subsequent lines (i.e., lines 3 and 4 in this example), are given @code{knr-argdecl} syntax. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Indentation Calculation @section Indentation Calculation @cindex indentation @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Indentation for a line is calculated from the syntactic context (@pxref{Syntactic Analysis}). First, a buffer position is found whose column will be the base for the indentation calculation. It's the anchor position in the first syntactic element that provides one that is used. If no syntactic element has an anchor position then column zero is used. Second, the syntactic symbols in each syntactic element are looked up in the @code{c-offsets-alist} style variable (@pxref{c-offsets-alist}), which is an association list of syntactic symbols and the offsets to apply for those symbols. These offsets are added together with the base column to produce the new indentation column. Let's use our two code examples above to see how this works. Here is our first example again: @example 1: void swap( int& a, int& b ) 2: @{ 3: int tmp = a; 4: a = b; 5: b = tmp; 6: @} @end example Let's say point is on line 3 and we hit the @key{TAB} key to reindent the line. The syntactic context for that line is: @example ((defun-block-intro 29)) @end example @noindent Since buffer position 29 is the first and only anchor position in the list, @ccmode{} goes there and asks for the current column. This brace is in column zero, so @ccmode{} uses @samp{0} as the base column. Next, @ccmode{} looks up @code{defun-block-intro} in the @code{c-offsets-alist} style variable. Let's say it finds the value @samp{4}; it adds this to the base column @samp{0}, yielding a running total indentation of 4 spaces. Since there is only one syntactic element on the list for this line, indentation calculation is complete, and the total indentation for the line is 4 spaces. Here's another example: @example 1: int add( int val, int incr, int doit ) 2: @{ 3: if( doit ) 4: @{ 5: return( val + incr ); 6: @} 7: return( val ); 8: @} @end example If we were to hit @kbd{TAB} on line 4 in the above example, the same basic process is performed, despite the differences in the syntactic context. The context for this line is: @example ((substatement-open 46)) @end example Here, @ccmode{} goes to buffer position 46, which is the @samp{i} in @code{if} on line 3. This character is in the fourth column on that line so the base column is @samp{4}. Then @ccmode{} looks up the @code{substatement-open} symbol in @code{c-offsets-alist}. Let's say it finds the value @samp{4}. It's added with the base column and yields an indentation for the line of 8 spaces. Simple, huh? Actually, it's a bit more complicated than that since the entries on @code{c-offsets-alist} can be much more than plain offsets. @xref{c-offsets-alist}, for the full story. Anyway, the mode usually just does The Right Thing without you having to think about it in this much detail. But when customizing indentation, it's helpful to understand the general indentation model being used. As you configure @ccmode{}, you might want to set the variable @code{c-echo-syntactic-information-p} to non-@code{nil} so that the syntactic context and calculated offset always is echoed in the minibuffer when you hit @kbd{TAB}. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Customizing Indentation @chapter Customizing Indentation @cindex customization, indentation @cindex indentation @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! The principal variable for customizing indentation is the style variable @code{c-offsets-alist}, which gives an @dfn{offset} (an indentation rule) for each syntactic symbol. Its structure and semantics are completely described in @ref{c-offsets-alist}. The various ways you can set the variable, including the use of the @ccmode{} style system, are described in @ref{Config Basics} and its sections, in particular @ref{Style Variables}. The simplest and most used kind of ``offset'' setting in @code{c-offsets-alist} is in terms of multiples of @code{c-basic-offset}: @defopt c-basic-offset @vindex basic-offset @r{(c-)} This style variable holds the basic offset between indentation levels. Its factory default is 4, but all the built-in styles set it themselves, to some value between 2 (for @code{gnu} style) and 8 (for @code{bsd}, @code{linux}, and @code{python} styles). @end defopt The most flexible ``offset'' setting you can make in @code{c-offsets-alist} is a line-up function (or even a list of them), either one supplied by @ccmode{} (@pxref{Line-Up Functions}) or one you write yourself (@pxref{Custom Line-Up}). Finally, in @ref{Other Indentation} you'll find the tool of last resort: a hook which is called after a line has been indented. You can install functions here to make ad-hoc adjustments to any line's indentation. @menu * c-offsets-alist:: * Interactive Customization:: * Line-Up Functions:: * Custom Line-Up:: * Other Indentation:: @end menu @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node c-offsets-alist @section c-offsets-alist @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! This section explains the structure and semantics of the style variable @code{c-offsets-alist}, the principal variable for configuring indentation. Details of how to set it up, and its relationship to @ccmode{}'s style system are given in @ref{Style Variables}. @defopt c-offsets-alist @vindex offsets-alist @r{(c-)} This is an alist which associates an offset with each syntactic symbol. This @dfn{offset} is a rule specifying how to indent a line whose syntactic context matches the symbol. @xref{Syntactic Analysis}. Note that the buffer-local binding of this alist in a @ccmode{} buffer contains an entry for @emph{every} syntactic symbol. Its global binding and its settings within style specifications usually contain only a few entries. @xref{Style Variables}. The offset specification associated with any particular syntactic symbol can be an integer, a variable name, a vector, a function or lambda expression, a list, or one of the following special symbols: @code{+}, @code{-}, @code{++}, @code{--}, @code{*}, or @code{/}. The meanings of these values are described in detail below. Here is an example fragment of a @code{c-offsets-alist}, showing some of these kinds of offsets: @example ((statement . 0) (substatement . +) (cpp-macro . [0]) (topmost-intro-cont . c-lineup-topmost-intro-cont) (statement-block-intro . (add c-lineup-whitesmith-in-block c-indent-multi-line-block)) @dots{} @*) @end example @end defopt @deffn Command c-set-offset (@kbd{C-c C-o}) @findex set-offset @r{(c-)} @kindex C-c C-o This command changes the entry for a syntactic symbol in the current binding of @code{c-offsets-alist}, or it inserts a new entry if there isn't already one for that syntactic symbol. You can use @code{c-set-offset} interactively within a @ccmode{} buffer to make experimental changes to your indentation settings. @kbd{C-c C-o} prompts you for the syntactic symbol to change (defaulting to that of the current line) and the new offset (defaulting to the current offset). @code{c-set-offset} takes two arguments when used programmatically: @var{symbol}, the syntactic element symbol to change and @var{offset}, the new offset for that syntactic element. You can call the command in your @file{.emacs} to change the global binding of @code{c-offsets-alist} (@pxref{Style Variables}); you can use it in a hook function to make changes from the current style. @ccmode{} itself uses this function when initializing styles. @end deffn @cindex offset specification The ``offset specifications'' in @code{c-offsets-alist} can be any of the following: @table @asis @item An integer The integer specifies a relative offset. All relative offsets@footnote{The syntactic context @code{@w{((defun-block-intro 2724) (comment-intro))}} would likely have two relative offsets.} will be added together and used to calculate the indentation relative to an anchor position earlier in the buffer. @xref{Indentation Calculation}, for details. Most of the time, it's probably better to use one of the special symbols like @code{+} than an integer (apart from zero). @item One of the symbols @code{+}, @code{-}, @code{++}, @code{--}, @code{*}, or @code{/} These special symbols describe a relative offset in multiples of @code{c-basic-offset}: By defining a style's indentation in terms of @code{c-basic-offset}, you can change the amount of whitespace given to an indentation level while maintaining the same basic shape of your code. Here are the values that the special symbols correspond to: @table @code @item + @code{c-basic-offset} times 1 @item - @code{c-basic-offset} times @minus{}1 @item ++ @code{c-basic-offset} times 2 @item -- @code{c-basic-offset} times @minus{}2 @item * @code{c-basic-offset} times 0.5 @item / @code{c-basic-offset} times @minus{}0.5 @end table @item A vector The first element of the vector, an integer, sets the absolute indentation column. This will override any previously calculated indentation, but won't override relative indentation calculated from syntactic elements later on in the syntactic context of the line being indented. @xref{Indentation Calculation}. Any elements in the vector beyond the first will be ignored. @item A function or lambda expression The function will be called and its return value will in turn be evaluated as an offset specification. Functions are useful when more context than just the syntactic symbol is needed to get the desired indentation. @xref{Line-Up Functions}, and @ref{Custom Line-Up}, for details about them. @item A symbol with a variable binding If the symbol also has a function binding, the function takes precedence over the variable. Otherwise the value of the variable is used. It must be an integer (which is used as relative offset) or a vector (an absolute offset). @item A list The offset can also be a list containing several offset specifications; these are evaluated recursively and combined. A list is typically only useful when some of the offsets are line-up functions. A common strategy is calling a sequence of functions in turn until one of them recognizes that it is appropriate for the source line and returns a non-@code{nil} value. @code{nil} values are always ignored when the offsets are combined. The first element of the list specifies the method of combining the non-@code{nil} offsets from the remaining elements: @table @code @item first Use the first offset that doesn't evaluate to @code{nil}. Subsequent elements of the list don't get evaluated. @item min Use the minimum of all the offsets. All must be either relative or absolute; they can't be mixed. @item max Use the maximum of all the offsets. All must be either relative or absolute; they can't be mixed. @item add Add all the evaluated offsets together. Exactly one of them may be absolute, in which case the result is absolute. Any relative offsets that preceded the absolute one in the list will be ignored in that case. @end table As a compatibility measure, if the first element is none of the above then it too will be taken as an offset specification and the whole list will be combined according to the method @code{first}. @end table @vindex c-strict-syntax-p @vindex strict-syntax-p @r{(c-)} If an offset specification evaluates to @code{nil}, then a relative offset of 0 (zero) is used@footnote{There is however a variable @code{c-strict-syntax-p} that when set to non-@code{nil} will cause an error to be signaled in that case. It's now considered obsolete since it doesn't work well with some of the alignment functions that return @code{nil} instead of zero. You should therefore leave @code{c-strict-syntax-p} set to @code{nil}.}. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Interactive Customization @section Interactive Customization @cindex customization, interactive @cindex interactive customization @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! As an example of how to customize indentation, let's change the style of this example@footnote{In this and subsequent examples, the original code is formatted using the @samp{gnu} style unless otherwise indicated. @xref{Styles}.}: @example @group 1: int add( int val, int incr, int doit ) 2: @{ 3: if( doit ) 4: @{ 5: return( val + incr ); 6: @} 7: return( val ); 8: @} @end group @end example @noindent to: @example @group 1: int add( int val, int incr, int doit ) 2: @{ 3: if( doit ) 4: @{ 5: return( val + incr ); 6: @} 7: return( val ); 8: @} @end group @end example In other words, we want to change the indentation of braces that open a block following a condition so that the braces line up under the conditional, instead of being indented. Notice that the construct we want to change starts on line 4. To change the indentation of a line, we need to see which syntactic symbols affect the offset calculations for that line. Hitting @kbd{C-c C-s} on line 4 yields: @example ((substatement-open 44)) @end example @noindent so we know that to change the offset of the open brace, we need to change the indentation for the @code{substatement-open} syntactic symbol. To do this interactively, just hit @kbd{C-c C-o}. This prompts you for the syntactic symbol to change, providing a reasonable default. In this case, the default is @code{substatement-open}, which is just the syntactic symbol we want to change! After you hit return, @ccmode{} will then prompt you for the new offset value, with the old value as the default. The default in this case is @samp{+}, but we want no extra indentation so enter @samp{0} and @kbd{RET}. This will associate the offset 0 with the syntactic symbol @code{substatement-open}. To check your changes quickly, just hit @kbd{C-c C-q} (@code{c-indent-defun}) to reindent the entire function. The example should now look like: @example @group 1: int add( int val, int incr, int doit ) 2: @{ 3: if( doit ) 4: @{ 5: return( val + incr ); 6: @} 7: return( val ); 8: @} @end group @end example Notice how just changing the open brace offset on line 4 is all we needed to do. Since the other affected lines are indented relative to line 4, they are automatically indented the way you'd expect. For more complicated examples, this might not always work. The general approach to take is to always start adjusting offsets for lines higher up in the file, then reindent and see if any following lines need further adjustments. @c Move this bit to "Styles" (2005/10/7) @deffn Command c-set-offset symbol offset @findex set-offset @r{(c-)} @kindex C-c C-o This is the command bound to @kbd{C-c C-o}. It provides a convenient way to set offsets on @code{c-offsets-alist} both interactively (see the example above) and from your mode hook. It takes two arguments when used programmatically: @var{symbol} is the syntactic element symbol to change and @var{offset} is the new offset for that syntactic element. @end deffn @c End of MOVE THIS BIT. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Line-Up Functions @section Line-Up Functions @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @cindex line-up function @cindex indentation function Often there are cases when a simple offset setting on a syntactic symbol isn't enough to get the desired indentation---for example, you might want to line up a closing parenthesis with the matching opening one rather than indenting relative to its ``anchor point''. @ccmode{} provides this flexibility with @dfn{line-up functions}. The way you associate a line-up function with a syntactic symbol is described in @ref{c-offsets-alist}. @ccmode{} comes with many predefined line-up functions for common situations. If none of these does what you want, you can write your own. @xref{Custom Line-Up}. Sometimes, it is easier to tweak the standard indentation by adding a function to @code{c-special-indent-hook} (@pxref{Other Indentation}). The line-up functions haven't been adapted for AWK buffers or tested with them. Some of them might work serendipitously. There shouldn't be any problems writing custom line-up functions for AWK mode. The calling convention for line-up functions is described fully in @ref{Custom Line-Up}. Roughly speaking, the return value is either an offset itself (such as @code{+} or @code{[0]}), another line-up function, or it's @code{nil}, meaning ``this function is inappropriate in this case - try a different one''. @xref{c-offsets-alist}. The subsections below describe all the standard line-up functions, categorized by the sort of token the lining-up centers around. For each of these functions there is a ``works with'' list that indicates which syntactic symbols the function is intended to be used with. @macro workswith @emph{Works with:@ } @end macro @ifinfo @unmacro workswith @macro workswith Works with: @end macro @end ifinfo @macro sssTBasicOffset <--> @i{c-basic-offset} @end macro @macro sssTsssTBasicOffset <--><--> @i{c-basic-offset} @end macro @macro hereFn{func} <- @i{\func\} @end macro @c The TeX backend seems to insert extra spaces around the argument. :P @iftex @unmacro hereFn @macro hereFn{func} <-@i{\func\}@c @end macro @end iftex @menu * Brace/Paren Line-Up:: * List Line-Up:: * Operator Line-Up:: * Comment Line-Up:: * Misc Line-Up:: @end menu @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Brace/Paren Line-Up @subsection Brace and Parenthesis Line-Up Functions @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! The line-up functions here calculate the indentation for braces, parentheses and statements within brace blocks. @defun c-lineup-close-paren @findex lineup-close-paren @r{(c-)} Line up the closing paren under its corresponding open paren if the open paren is followed by code. If the open paren ends its line, no indentation is added. E.g.: @example @group main (int, char ** ) @hereFn{c-lineup-close-paren} @end group @end example @noindent and @example @group main ( int, char ** ) @hereFn{c-lineup-close-paren} @end group @end example As a special case, if a brace block is opened at the same line as the open parenthesis of the argument list, the indentation is @code{c-basic-offset} instead of the open paren column. See @code{c-lineup-arglist} for further discussion of this ``DWIM'' measure. @workswith All @code{*-close} symbols. @end defun @comment ------------------------------------------------------------ @anchor{c-lineup-arglist-close-under-paren} @defun c-lineup-arglist-close-under-paren @findex lineup-arglist-close-under-paren @r{(c-)} Set your @code{arglist-close} syntactic symbol to this line-up function so that parentheses that close argument lists will line up under the parenthesis that opened the argument list. It can also be used with @code{arglist-cont} and @code{arglist-cont-nonempty} to line up all lines inside a parenthesis under the open paren. As a special case, if a brace block is opened at the same line as the open parenthesis of the argument list, the indentation is @code{c-basic-offset} only. See @code{c-lineup-arglist} for further discussion of this ``DWIM'' measure. @workswith Almost all symbols, but are typically most useful on @code{arglist-close}, @code{brace-list-close}, @code{arglist-cont} and @code{arglist-cont-nonempty}. @end defun @comment ------------------------------------------------------------ @defun c-indent-one-line-block @findex indent-one-line-block @r{(c-)} Indent a one line block @code{c-basic-offset} extra. E.g.: @example @group if (n > 0) @{m+=n; n=0;@} @hereFn{c-indent-one-line-block} @sssTBasicOffset{} @end group @end example @noindent and @example @group if (n > 0) @{ @hereFn{c-indent-one-line-block} m+=n; n=0; @} @end group @end example The block may be surrounded by any kind of parenthesis characters. @code{nil} is returned if the line doesn't start with a one line block, which makes the function usable in list expressions. @workswith Almost all syntactic symbols, but most useful on the @code{-open} symbols. @end defun @comment ------------------------------------------------------------ @defun c-indent-multi-line-block @findex indent-multi-line-block @r{(c-)} Indent a multiline block @code{c-basic-offset} extra. E.g.: @example @group int *foo[] = @{ NULL, @{17@}, @hereFn{c-indent-multi-line-block} @end group @end example @noindent and @example @group int *foo[] = @{ NULL, @{ @hereFn{c-indent-multi-line-block} 17 @}, @sssTBasicOffset{} @end group @end example The block may be surrounded by any kind of parenthesis characters. @code{nil} is returned if the line doesn't start with a multiline block, which makes the function usable in list expressions. @workswith Almost all syntactic symbols, but most useful on the @code{-open} symbols. @end defun @comment ------------------------------------------------------------ @defun c-lineup-runin-statements @findex lineup-runin-statements @r{(c-)} Line up statements for coding standards which place the first statement in a block on the same line as the block opening brace@footnote{Run-in style doesn't really work too well. You might need to write your own custom line-up functions to better support this style.}. E.g.: @example @group int main() @{ puts ("Hello!"); return 0; @hereFn{c-lineup-runin-statements} @} @end group @end example If there is no statement after the opening brace to align with, @code{nil} is returned. This makes the function usable in list expressions. @workswith The @code{statement} syntactic symbol. @end defun @comment ------------------------------------------------------------ @defun c-lineup-inexpr-block @findex lineup-inexpr-block @r{(c-)} This can be used with the in-expression block symbols to indent the whole block to the column where the construct is started. E.g., for Java anonymous classes, this lines up the class under the @samp{new} keyword, and in Pike it lines up the lambda function body under the @samp{lambda} keyword. Returns @code{nil} if the block isn't part of such a construct. @workswith @code{inlambda}, @code{inexpr-statement}, @code{inexpr-class}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-after-whitesmith-blocks @findex lineup-after-whitesmith-blocks @r{(c-)} Compensate for Whitesmith style indentation of blocks. Due to the way @ccmode{} calculates anchor positions for normal lines inside blocks, this function is necessary for those lines to get correct Whitesmith style indentation. Consider the following examples: @example @group int foo() @{ a; x; @hereFn{c-lineup-after-whitesmith-blocks} @end group @end example @example @group int foo() @{ @{ a; @} x; @hereFn{c-lineup-after-whitesmith-blocks} @end group @end example The fact that the line with @code{x} is preceded by a Whitesmith style indented block in the latter case and not the first should not affect its indentation. But since CC Mode in cases like this uses the indentation of the preceding statement as anchor position, the @code{x} would in the second case be indented too much if the offset for @code{statement} was set simply to zero. This lineup function corrects for this situation by detecting if the anchor position is at an open paren character. In that case, it instead indents relative to the surrounding block just like @code{c-lineup-whitesmith-in-block}. @workswith @code{brace-list-entry}, @code{brace-entry-open}, @code{statement}, @code{arglist-cont}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-whitesmith-in-block @findex lineup-whitesmith-in-block @r{(c-)} Line up lines inside a block in Whitesmith style. It's done in a way that works both when the opening brace hangs and when it doesn't. E.g.: @example @group something @{ foo; @hereFn{c-lineup-whitesmith-in-block} @} @end group @end example @noindent and @example @group something @{ foo; @hereFn{c-lineup-whitesmith-in-block} @} @sssTBasicOffset{} @end group @end example In the first case the indentation is kept unchanged, in the second @code{c-basic-offset} is added. @workswith @code{defun-close}, @code{defun-block-intro}, @code{inline-close}, @code{block-close}, @code{brace-list-close}, @code{brace-list-intro}, @code{statement-block-intro}, @code{arglist-intro}, @code{arglist-cont-nonempty}, @code{arglist-close}, and all @code{in*} symbols, e.g., @code{inclass} and @code{inextern-lang}. @end defun @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node List Line-Up @subsection List Line-Up Functions @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! The line-up functions here calculate the indentation for lines which form lists of items, usually separated by commas. The function @ref{c-lineup-arglist-close-under-paren}, which is mainly for indenting a close parenthesis, is also useful for the lines contained within parentheses. @defun c-lineup-arglist @findex lineup-arglist @r{(c-)} Line up the current argument line under the first argument. As a special case, if an argument on the same line as the open parenthesis starts with a brace block opener, the indentation is @code{c-basic-offset} only. This is intended as a ``DWIM'' measure in cases like macros that contain statement blocks, e.g.: @example @group A_VERY_LONG_MACRO_NAME (@{ some (code, with + long, lines * in[it]); @}); @sssTBasicOffset{} @end group @end example This is motivated partly because it's more in line with how code blocks are handled, and partly since it approximates the behavior of earlier CC Mode versions, which due to inaccurate analysis tended to indent such cases this way. @workswith @code{arglist-cont-nonempty}, @code{arglist-close}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-arglist-intro-after-paren @findex lineup-arglist-intro-after-paren @r{(c-)} Line up a line to just after the open paren of the surrounding paren or brace block. @workswith @code{defun-block-intro}, @code{brace-list-intro}, @code{statement-block-intro}, @code{statement-case-intro}, @code{arglist-intro}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-2nd-brace-entry-in-arglist @findex lineup-2nd-brace-entry-in-arglist (c-) Line up the second entry of a brace block under the first, when the first line is also contained in an arglist or an enclosing brace @emph{on that line}. I.e. handle something like the following: @example @group set_line (line_t @{point_t@{0.4, 0.2@}, point_t@{0.2, 0.5@}, @hereFn{brace-list-intro} .....@}); ^ enclosing parenthesis. @end group @end example The middle line of that example will have a syntactic context with three syntactic symbols, @code{arglist-cont-nonempty}, @code{brace-list-intro}, and @code{brace-list-entry} (@pxref{Brace List Symbols}). This function is intended for use in a list. If the construct being analyzed isn't like the preceding, the function returns nil. Otherwise it returns the function @code{c-lineup-arglist-intro-after-paren}, which the caller then uses to perform indentation. @workswith{} @code{brace-list-intro}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-class-decl-init-+ @findex lineup-class-decl-init-+ (c-) Line up the second entry of a class (etc.) initializer @code{c-basic-offset} characters in from the identifier when: @enumerate @item The type is a class, struct, union, etc. (but not an enum); @item There is a brace block in the type declaration, specifying it; and @item The first element of the initializer is on the same line as its opening brace. @end enumerate I.e. we have a construct like this: @example @group struct STR @{ int i; float f; @} str_1 = @{1, 1.7@}, str_2 = @{2, 3.1 @hereFn{brace-list-intro} @}; @sssTBasicOffset{} @end group @end example Note that the syntactic context of the @code{brace-list-intro} line also has a syntactic element with the symbol @code{brace-list-entry} (@pxref{Brace List Symbols}). This function is intended for use in a list. If the above structure isn't present, the function returns nil, allowing a different offset specification to indent the line. @workswith{} @code{brace-list-intro}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-class-decl-init-after-brace @findex lineup-class-decl-init-after-brace (c-) Line up the second entry of a class (etc.) initializer after its opening brace when: @enumerate @item The type is a class, struct, union, etc. (but not an enum); @item There is a brace block in the type declaration, specifying it; and @item The first element of the initializer is on the same line as its opening brace. @end enumerate I.e. we have a construct like this: @example @group struct STR @{ int i; float f; @} str_1 = @{1, 1.7@}, str_2 = @{2, 3.1 @hereFn{brace-list-intro} @}; @end group @end example Note that the syntactic context of the @code{brace-list-intro} line also has a syntactic element with the symbol @code{brace-list-entry} (@pxref{Brace List Symbols}). Also note that this function works by returning the symbol @code{c-lineup-arglist-intro-after-paren}, which the caller then uses to perform the indentation. This function is intended for use in a list. If the above structure isn't present, the function returns nil, allowing a different offset specification to indent the line. @workswith{} @code{brace-list-intro}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-multi-inher @findex lineup-multi-inher @r{(c-)} Line up the classes in C++ multiple inheritance clauses and member initializers under each other. E.g.: @example @group Foo::Foo (int a, int b): Cyphr (a), Bar (b) @hereFn{c-lineup-multi-inher} @end group @end example @noindent and @example @group class Foo : public Cyphr, public Bar @hereFn{c-lineup-multi-inher} @end group @end example @noindent and @example @group Foo::Foo (int a, int b) : Cyphr (a) , Bar (b) @hereFn{c-lineup-multi-inher} @end group @end example @workswith @code{inher-cont}, @code{member-init-cont}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-java-inher @findex lineup-java-inher @r{(c-)} Line up Java implements and extends declarations. If class names follow on the same line as the @samp{implements}/@samp{extends} keyword, they are lined up under each other. Otherwise, they are indented by adding @code{c-basic-offset} to the column of the keyword. E.g.: @example @group class Foo extends Bar @hereFn{c-lineup-java-inher} @sssTBasicOffset{} @end group @end example @noindent and @example @group class Foo extends Cyphr, Bar @hereFn{c-lineup-java-inher} @end group @end example @workswith @code{inher-cont}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-java-throws @findex lineup-java-throws @r{(c-)} Line up Java throws declarations. If exception names follow on the same line as the throws keyword, they are lined up under each other. Otherwise, they are indented by adding @code{c-basic-offset} to the column of the @samp{throws} keyword. The @samp{throws} keyword itself is also indented by @code{c-basic-offset} from the function declaration start if it doesn't hang. E.g.: @example @group int foo() throws @hereFn{c-lineup-java-throws} Bar @hereFn{c-lineup-java-throws} @sssTsssTBasicOffset{} @end group @end example @noindent and @example @group int foo() throws Cyphr, Bar, @hereFn{c-lineup-java-throws} Vlod @hereFn{c-lineup-java-throws} @end group @end example @workswith @code{func-decl-cont}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-template-args @findex lineup-template-args @r{(c-)} Line up the arguments of a template argument list under each other, but only in the case where the first argument is on the same line as the opening @samp{<}. To allow this function to be used in a list expression, @code{nil} is returned if there's no template argument on the first line. @workswith @code{template-args-cont}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-ObjC-method-call @findex lineup-ObjC-method-call @r{(c-)} For Objective-C code, line up selector args as Emacs Lisp mode does with function args: go to the position right after the message receiver, and if you are at the end of the line, indent the current line c-basic-offset columns from the opening bracket; otherwise you are looking at the first character of the first method call argument, so lineup the current line with it. @workswith @code{objc-method-call-cont}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-ObjC-method-args @findex lineup-ObjC-method-args @r{(c-)} For Objective-C code, line up the colons that separate args. The colon on the current line is aligned with the one on the first line. @workswith @code{objc-method-args-cont}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-ObjC-method-args-2 @findex lineup-ObjC-method-args-2 @r{(c-)} Similar to @code{c-lineup-ObjC-method-args} but lines up the colon on the current line with the colon on the previous line. @workswith @code{objc-method-args-cont}. @end defun @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Operator Line-Up @subsection Operator Line-Up Functions @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! The line-up functions here calculate the indentation for lines which start with an operator, by lining it up with something on the previous line. @defun c-lineup-argcont @findex lineup-argcont @r{(c-)} Line up a continued argument. E.g.: @example @group foo (xyz, aaa + bbb + ccc + ddd + eee + fff); @hereFn{c-lineup-argcont} @end group @end example Only continuation lines like this are touched, @code{nil} is returned on lines which are the start of an argument. Within a gcc @code{asm} block, @code{:} is recognized as an argument separator, but of course only between operand specifications, not in the expressions for the operands. @workswith @code{arglist-cont}, @code{arglist-cont-nonempty}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-argcont-+ @findex lineup-argcont-+ (c-) Indent a continued argument @code{c-basic-offset} spaces from the start of the first argument at the current level of nesting on a previous line. @example @group foo (xyz, uvw, aaa + bbb + ccc + ddd + eee + fff); <- c-lineup-argcont-+ <--> c-basic-offset @end group @end example Only continuation lines like this are touched, @code{nil} being returned on lines which are the start of an argument. Within a gcc @code{asm} block, @code{:} is recognized as an argument separator, but of course only between operand specifications, not in the expressions for the operands. @workswith @code{arglist-cont}, @code{arglist-cont-nonempty}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-arglist-operators @findex lineup-arglist-operators @r{(c-)} Line up lines starting with an infix operator under the open paren. Return @code{nil} on lines that don't start with an operator, to leave those cases to other line-up functions. Example: @example @group if ( x < 10 || at_limit (x, @hereFn{c-lineup-arglist-operators} list) @hereFn{c-lineup-arglist-operators@r{ returns nil}} ) @end group @end example Since this function doesn't do anything for lines without an infix operator you typically want to use it together with some other lineup settings, e.g., as follows (the @code{arglist-close} setting is just a suggestion to get a consistent style): @example (c-set-offset 'arglist-cont '(c-lineup-arglist-operators 0)) (c-set-offset 'arglist-cont-nonempty '(c-lineup-arglist-operators c-lineup-arglist)) (c-set-offset 'arglist-close '(c-lineup-arglist-close-under-paren)) @end example @workswith @code{arglist-cont}, @code{arglist-cont-nonempty}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-assignments @findex lineup-assignments @r{(c-)} Line up the current line after the assignment operator on the first line in the statement. If there isn't any, return @code{nil} to allow stacking with other line-up functions. If the current line contains an assignment operator too, try to align it with the first one. @workswith @code{topmost-intro-cont}, @code{statement-cont}, @code{arglist-cont}, @code{arglist-cont-nonempty}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-math @findex lineup-math @r{(c-)} Like @code{c-lineup-assignments} but indent with @code{c-basic-offset} if no assignment operator was found on the first line. I.e., this function is the same as specifying a list @code{(c-lineup-assignments +)}. It's provided for compatibility with old configurations. @workswith @code{topmost-intro-cont}, @code{statement-cont}, @code{arglist-cont}, @code{arglist-cont-nonempty}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-ternary-bodies @findex lineup-ternary-bodies @r{(c-)} Line up true and false branches of a ternary operator (i.e. @code{?:}). More precisely, if the line starts with a colon which is a part of a said operator, align it with corresponding question mark. For example: @example @group return arg % 2 == 0 ? arg / 2 : (3 * arg + 1); @hereFn{c-lineup-ternary-bodies} @end group @end example @workswith @code{arglist-cont}, @code{arglist-cont-nonempty} and @code{statement-cont}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-cascaded-calls @findex lineup-cascaded-calls @r{(c-)} Line up ``cascaded calls'' under each other. If the line begins with @code{->} or @code{.} and the preceding line ends with one or more function calls preceded by the same token, then the arrow is lined up with the first of those tokens. E.g.: @example @group r = proc->add(17)->add(18) ->add(19) + @hereFn{c-lineup-cascaded-calls} offset; @hereFn{c-lineup-cascaded-calls@r{ (inactive)}} @end group @end example In any other situation @code{nil} is returned to allow use in list expressions. @workswith @code{topmost-intro-cont}, @code{statement-cont}, @code{arglist-cont}, @code{arglist-cont-nonempty}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-streamop @findex lineup-streamop @r{(c-)} Line up C++ stream operators (i.e., @samp{<<} and @samp{>>}). @workswith @code{stream-op}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-string-cont @findex lineup-string-cont @r{(c-)} Line up a continued string under the one it continues. A continued string in this sense is where a string literal follows directly after another one. E.g.: @example @group result = prefix + "A message " "string."; @hereFn{c-lineup-string-cont} @end group @end example @code{nil} is returned in other situations, to allow stacking with other lineup functions. @workswith @code{topmost-intro-cont}, @code{statement-cont}, @code{arglist-cont}, @code{arglist-cont-nonempty}. @end defun @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Comment Line-Up @subsection Comment Line-Up Functions @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! The lineup functions here calculate the indentation for several types of comment structure. @defun c-lineup-C-comments @findex lineup-C-comments @r{(c-)} Line up C block comment continuation lines. Various heuristics are used to handle most of the common comment styles. Some examples: @example @group /* /** /* * text * text text */ */ */ @end group @end example @example @group /* text /* /** text ** text ** text */ */ */ @end group @end example @example @group /************************************************** * text *************************************************/ @end group @end example @vindex comment-start-skip @example @group /************************************************** Free form text comments: In comments with a long delimiter line at the start, the indentation is kept unchanged for lines that start with an empty comment line prefix. The delimiter line is whatever matches the @code{comment-start-skip} regexp. **************************************************/ @end group @end example The style variable @code{c-comment-prefix-regexp} is used to recognize the comment line prefix, e.g., the @samp{*} that usually starts every line inside a comment. @workswith The @code{c} syntactic symbol. @end defun @comment ------------------------------------------------------------ @defun c-lineup-comment @findex lineup-comment @r{(c-)} Line up a comment-only line according to the style variable @code{c-comment-only-line-offset}. If the comment is lined up with a comment starter on the previous line, that alignment is preserved. @defopt c-comment-only-line-offset @vindex comment-only-line-offset @r{(c-)} This style variable specifies the extra offset for the line. It can contain an integer or a cons cell of the form @example (@r{@var{non-anchored-offset}} . @r{@var{anchored-offset}}) @end example @noindent where @var{non-anchored-offset} is the amount of offset given to non-column-zero anchored lines, and @var{anchored-offset} is the amount of offset to give column-zero anchored lines. Just an integer as value is equivalent to @code{(@r{@var{value}} . -1000)}. @end defopt @workswith @code{comment-intro}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-knr-region-comment @findex lineup-knr-region-comment @r{(c-)} Line up a comment in the ``K&R region'' with the declaration. That is the region between the function or class header and the beginning of the block. E.g.: @example @group int main() /* Called at startup. */ @hereFn{c-lineup-knr-region-comment} @{ return 0; @} @end group @end example Return @code{nil} if called in any other situation, to be useful in list expressions. @workswith @code{comment-intro}. @end defun @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Misc Line-Up @subsection Miscellaneous Line-Up Functions @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! The line-up functions here are the odds and ends which didn't fit into any earlier category. @defun c-lineup-dont-change @findex lineup-dont-change @r{(c-)} This lineup function makes the line stay at whatever indentation it already has; think of it as an identity function for lineups. @workswith Any syntactic symbol. @end defun @comment ------------------------------------------------------------ @defun c-lineup-under-anchor Line up a line directly underneath its anchor point. This is like @samp{0}, except any previously calculated offset contributions are disregarded. @workswith Any syntactic symbol which has an anchor point. @end defun @comment ------------------------------------------------------------ @defun c-lineup-cpp-define @findex lineup-cpp-define @r{(c-)} Line up macro continuation lines according to the indentation of the construct preceding the macro. E.g.: @example @group const char msg[] = @hereFn{@r{The beginning of the preceding construct.}} \"Some text.\"; #define X(A, B) \ do @{ \ @hereFn{c-lineup-cpp-define} printf (A, B); \ @} while (0) @end group @end example @noindent and: @example @group int dribble() @{ if (!running) @hereFn{@r{The beginning of the preceding construct.}} error(\"Not running!\"); #define X(A, B) \ do @{ \ @hereFn{c-lineup-cpp-define} printf (A, B); \ @} while (0) @end group @end example If @code{c-syntactic-indentation-in-macros} is non-@code{nil}, the function returns the relative indentation to the macro start line to allow accumulation with other offsets. E.g., in the following cases, @code{cpp-define-intro} is combined with the @code{statement-block-intro} that comes from the @samp{do @{} that hangs on the @samp{#define} line: @example @group const char msg[] = \"Some text.\"; #define X(A, B) do @{ \ printf (A, B); \ @hereFn{c-lineup-cpp-define} this->refs++; \ @} while (0) @hereFn{c-lineup-cpp-define} @end group @end example @noindent and: @example @group int dribble() @{ if (!running) error(\"Not running!\"); #define X(A, B) do @{ \ printf (A, B); \ @hereFn{c-lineup-cpp-define} this->refs++; \ @} while (0) @hereFn{c-lineup-cpp-define} @end group @end example The relative indentation returned by @code{c-lineup-cpp-define} is zero and two, respectively, on the two lines in each of these examples. They are then added to the two column indentation that @code{statement-block-intro} gives in both cases here. If the relative indentation is zero, then @code{nil} is returned instead. That is useful in a list expression to specify the default indentation on the top level. If @code{c-syntactic-indentation-in-macros} is @code{nil} then this function keeps the current indentation, except for empty lines (ignoring the ending backslash) where it takes the indentation from the closest preceding nonempty line in the macro. If there's no such line in the macro then the indentation is taken from the construct preceding it, as described above. @workswith @code{cpp-define-intro}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-gcc-asm-reg @findex lineup-gcc-asm-reg @r{(c-)} Line up a gcc asm register under one on a previous line. @example @group asm ("foo %1, %0\n" "bar %0, %1" : "=r" (w), "=r" (x) : "0" (y), "1" (z)); @end group @end example The @samp{x} line is aligned to the text after the @samp{:} on the @samp{w} line, and similarly @samp{z} under @samp{y}. This is done only in an @samp{asm} or @samp{__asm__} block, and only to those lines mentioned. Anywhere else @code{nil} is returned. The usual arrangement is to have this routine as an extra feature at the start of arglist lineups, e.g.: @example (c-lineup-gcc-asm-reg c-lineup-arglist) @end example @workswith @code{arglist-cont}, @code{arglist-cont-nonempty}. @end defun @comment ------------------------------------------------------------ @defun c-lineup-topmost-intro-cont @findex lineup-topmost-intro-cont @r{(c-)} Line up declaration continuation lines zero or one indentation step@footnote{This function is mainly provided to mimic the behavior of CC Mode 5.28 and earlier where this case wasn't handled consistently so that those lines could be analyzed as either topmost-intro-cont or statement-cont. It's used for @code{topmost-intro-cont} by default, but you might consider using @code{+} instead.}. For lines preceding a definition, zero is used. For other lines, @code{c-basic-offset} is added to the indentation. E.g.: @example @group int neg (int i) @hereFn{c-lineup-topmost-intro-cont} @{ return -i; @} @end group @end example @noindent and @example @group struct larch @hereFn{c-lineup-topmost-intro-cont} @{ double height; @} the_larch, @hereFn{c-lineup-topmost-intro-cont} another_larch; @hereFn{c-lineup-topmost-intro-cont} @sssTBasicOffset{} @end group @end example @noindent and @example @group struct larch the_larch, @hereFn{c-lineup-topmost-intro-cont} another_larch; @hereFn{c-lineup-topmost-intro-cont} @end group @end example @workswith @code{topmost-intro-cont}. @end defun @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Custom Line-Up @section Custom Line-Up Functions @cindex customization, indentation functions @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! The most flexible way to customize indentation is by writing custom line-up functions, and associating them with specific syntactic symbols (@pxref{c-offsets-alist}). Depending on the effect you want, it might be better to write a @code{c-special-indent-hook} function rather than a line-up function (@pxref{Other Indentation}). @ccmode{} comes with an extensive set of predefined line-up functions, not all of which are used by the default styles. So there's a good chance the function you want already exists. @xref{Line-Up Functions}, for a list of them. If you write your own line-up function, it's probably a good idea to start working from one of these predefined functions, which can be found in the file @file{cc-align.el}. If you have written a line-up function that you think is generally useful, you're very welcome to contribute it; please contact @email{bug-cc-mode@@gnu.org}. Line-up functions are passed a single argument, the syntactic element (see below). At the time of the call, point will be somewhere on the line being indented. The return value is a @code{c-offsets-alist} offset specification: for example, an integer, a symbol such as @code{+}, a vector, @code{nil}@footnote{Returning @code{nil} is useful when the offset specification for a syntactic element is a list containing the line-up function (@pxref{c-offsets-alist}).}, or even another line-up function. Full details of these are in @ref{c-offsets-alist}. Line-up functions must not move point or change the content of the buffer (except temporarily). They are however allowed to do @dfn{hidden buffer changes}, i.e., setting text properties for caching purposes etc. Buffer undo recording is disabled while they run. The syntactic element passed as the parameter to a line-up function is a cons cell of the form @example (@r{@var{syntactic-symbol}} . @r{@var{anchor-position}}) @end example @noindent @c FIXME!!! The following sentence might be better omitted, since the @c information is in the cross reference "Syntactic Analysis". 2005/10/2. where @var{syntactic-symbol} is the symbol that the function was called for, and @var{anchor-position} is the anchor position (if any) for the construct that triggered the syntactic symbol (@pxref{Syntactic Analysis}). This cons cell is how the syntactic element of a line used to be represented in @ccmode{} 5.28 and earlier. Line-up functions are still passed this cons cell, so as to preserve compatibility with older configurations. In the future, we may decide to convert to using the full list format---you can prepare your setup for this by using the access functions (@code{c-langelem-sym}, etc.)@: described below. @vindex c-syntactic-element @vindex syntactic-element @r{(c-)} @vindex c-syntactic-context @vindex syntactic-context @r{(c-)} Some syntactic symbols, e.g., @code{arglist-cont-nonempty}, have more info in the syntactic element: typically other positions that can be interesting besides the anchor position. That info can't be accessed through the passed argument, which is a cons cell. Instead, you can get this information from the variable @code{c-syntactic-element}, which is dynamically bound to the complete syntactic element. The variable @code{c-syntactic-context} might also be useful: it gets dynamically bound to the complete syntactic context. @xref{Custom Braces}. @ccmode{} provides a few functions to access parts of syntactic elements in a more abstract way. Besides making the code easier to read, they also hide the difference between the old cons cell form used in the line-up function argument and the new list form used in @code{c-syntactic-element} and everywhere else. The functions are: @defun c-langelem-sym langelem @findex langelem-sym @r{(c-)} Return the syntactic symbol in @var{langelem}. @end defun @defun c-langelem-pos langelem @findex langelem-pos @r{(c-)} Return the anchor position in @var{langelem}, or @code{nil} if there is none. @end defun @defun c-langelem-col langelem &optional preserve-point @findex langelem-col @r{(c-)} Return the column of the anchor position in @var{langelem}. Also move the point to that position unless @var{preserve-point} is non-@code{nil}. @end defun @defun c-langelem-2nd-pos langelem @findex langelem-2nd-pos @r{(c-)} Return the secondary position in @var{langelem}, or @code{nil} if there is none. Note that the return value of this function is always @code{nil} if @var{langelem} is in the old cons cell form. Thus this function is only meaningful when used on syntactic elements taken from @code{c-syntactic-element} or @code{c-syntactic-context}. @end defun Sometimes you may need to use the syntactic context of a line other than the one being indented. You can determine this by (temporarily) moving point onto this line and calling @code{c-guess-basic-syntax} (@pxref{Syntactic Analysis}). Custom line-up functions can be as simple or as complex as you like, and any syntactic symbol that appears in @code{c-offsets-alist} can have a custom line-up function associated with it. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Other Indentation @section Other Special Indentations @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! To configure macros which you invoke without a terminating @samp{;}, @pxref{Macros with ;}. Here are the remaining odds and ends regarding indentation: @defopt c-label-minimum-indentation @vindex label-minimum-indentation @r{(c-)} In @samp{gnu} style (@pxref{Built-in Styles}), a minimum indentation is imposed on lines inside code blocks. This minimum indentation is controlled by this style variable. The default value is 1. @findex c-gnu-impose-minimum @findex gnu-impose-minimum @r{(c-)} It's the function @code{c-gnu-impose-minimum} that enforces this minimum indentation. It must be present on @code{c-special-indent-hook} to work. @end defopt @defopt c-special-indent-hook @vindex special-indent-hook @r{(c-)} This style variable is a standard hook variable that is called after every line is indented by @ccmode{}. It is called only if @code{c-syntactic-indentation} is non-@code{nil} (which it is by default (@pxref{Indentation Engine Basics})). You can put a function on this hook to do any special indentation or ad hoc line adjustments your style dictates, such as adding extra indentation to constructors or destructor declarations in a class definition, etc. Sometimes it is better to write a custom Line-up Function instead (@pxref{Custom Line-Up}). When the indentation engine calls this hook, the variable @code{c-syntactic-context} is bound to the current syntactic context (i.e., what you would get by typing @kbd{C-c C-s} on the source line. @xref{Custom Braces}.). Note that you should not change point or mark inside a @code{c-special-indent-hook} function, i.e., you'll probably want to wrap your function in a @code{save-excursion}@footnote{The numerical value returned by @code{point} will change if you change the indentation of the line within a @code{save-excursion} form, but point itself will still be over the same piece of text.}. Setting @code{c-special-indent-hook} in style definitions is handled slightly differently from other variables---A style can only add functions to this hook, not remove them. @xref{Style Variables}. @end defopt @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Custom Macros @chapter Customizing Macros @cindex macros @cindex preprocessor directives @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Preprocessor macros in C, C++, and Objective C (introduced by @code{#define}) have a syntax different from the main language---for example, a macro declaration is not terminated by a semicolon, and if it is more than a line long, line breaks in it must be escaped with backslashes. @ccmode{} has some commands to manipulate these, see @ref{Macro Backslashes}. Normally, the lines in a multi-line macro are indented relative to each other as though they were code. You can suppress this behavior by setting the following user option: @defopt c-syntactic-indentation-in-macros @vindex syntactic-indentation-in-macros @r{(c-)} Enable syntactic analysis inside macros, which is the default. If this is @code{nil}, all lines inside macro definitions are analyzed as @code{cpp-macro-cont}. @end defopt Sometimes you may want to indent particular directives (e.g. @code{#pragma}) as though they were statements. To do this, see @ref{Indenting Directives}. Because a macro can expand into anything at all, near where one is invoked @ccmode{} can only indent and fontify code heuristically. Sometimes it gets it wrong. Usually you should try to design your macros so that they ``look like ordinary code'' when you invoke them. However, two situations are so common that @ccmode{} handles them specially: that is when certain macros needn't (or mustn't) be followed by a @samp{;}, and when certain macros (or compiler directives) expand to nothing. You need to configure @ccmode{} to handle these macros properly, see @ref{Macros with ;} and @ref{Noise Macros}. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @menu * Macro Backslashes:: * Macros with ;:: * Noise Macros:: * Indenting Directives:: @end menu @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Macro Backslashes @comment node-name, next, previous, up @section Customizing Macro Backslashes @cindex @code{#define} @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @ccmode{} provides some tools to help keep the line continuation backslashes in macros neat and tidy. Their precise action is customized with these variables: @defopt c-backslash-column @vindex backslash-column @r{(c-)} @defoptx c-backslash-max-column @vindex backslash-max-column @r{(c-)} These variables control the alignment columns for line continuation backslashes in multiline macros. They are used by the functions that automatically insert or align such backslashes, e.g., @code{c-backslash-region} and @code{c-context-line-break}. @code{c-backslash-column} specifies the minimum column for the backslashes. If any line in the macro goes past this column, then the next tab stop (i.e., next multiple of @code{tab-width}) in that line is used as the alignment column for all the backslashes, so that they remain in a single column. However, if any lines go past @code{c-backslash-max-column} then the backslashes in the rest of the macro will be kept at that column, so that the lines which are too long ``stick out'' instead. Don't ever set these variables to @code{nil}. If you want to disable the automatic alignment of backslashes, use @code{c-auto-align-backslashes}. @end defopt @defopt c-auto-align-backslashes @vindex auto-align-backslashes @r{(c-)} Align automatically inserted line continuation backslashes if non-@code{nil}. When line continuation backslashes are inserted automatically for line breaks in multiline macros, e.g., by @code{c-context-line-break}, they are aligned with the other backslashes in the same macro if this flag is set. If @code{c-auto-align-backslashes} is @code{nil}, automatically inserted backslashes are preceded by a single space, and backslashes get aligned only when you explicitly invoke the command @code{c-backslash-region} (@kbd{C-c C-\}). @end defopt @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Macros with ; @comment node-name, next, previous, up @section Macros with semicolons @cindex macros with semicolons @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Macros which needn't (or mustn't) be followed by a semicolon when you invoke them, @dfn{macros with semicolons}, are very common. These can cause @ccmode{} to parse the next line wrongly as a @code{statement-cont} (@pxref{Function Symbols}) and thus mis-indent it. At the top level, a macro invocation before a defun start can cause, for example, @code{c-beginning-of-defun} (@kbd{C-M-a}) not to find the correct start of the current function. You can prevent these by specifying which macros have semicolons. It doesn't matter whether or not such a macro has a parameter list: @defopt c-macro-names-with-semicolon @vindex macro-names-with-semicolon @r{(c-)} This buffer-local variable specifies which macros have semicolons. After setting its value, you need to call @code{c-make-macro-with-semi-re} for it to take effect. It should be set to one of these values: @table @asis @item nil There are no macros with semicolons. @item a list of strings Each string is the name of a macro with a semicolon. Only valid @code{#define} names are allowed here. For example, to set the default value, you could write the following into your @file{.emacs}: @example (setq c-macro-names-with-semicolon '("Q_OBJECT" "Q_PROPERTY" "Q_DECLARE" "Q_ENUMS")) @end example @item a regular expression This matches each symbol which is a macro with a semicolon. It must not match any string which isn't a valid @code{#define} name. For example: @example (setq c-macro-names-with-semicolon "\\<\\(CLEAN_UP_AND_RETURN\\|Q_[[:upper:]]+\\)\\>") @end example @end table @end defopt @defun c-make-macro-with-semi-re @findex make-macro-with-semi-re @r{(c-)} Call this (non-interactive) function, which sets internal variables, each time you change the value of @code{c-macro-names-with-semicolon} after the major mode function has run. It takes no arguments, and its return value has no meaning. This function is called by @ccmode{}'s initialization code, after the mode hooks have run. @end defun @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Noise Macros @section Noise Macros @cindex noise macros @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! In @ccmode{}, @dfn{noise macros} are macros which expand to nothing, or compiler directives (such as GCC's @code{__attribute__}) which play no part in the syntax of the C (etc.) language. Some noise macros are followed by arguments in parentheses (possibly optionally), others are not. Noise macros can easily confuse @ccmode{}'s analysis of function headers, causing them to be mis-fontified, or even mis-indented. You can prevent this confusion by specifying the identifiers which constitute noise macros. @defopt c-noise-macro-names @vindex noise-macro-names @r{(c-)} This variable is a list of names of noise macros which never have parenthesized arguments. Each element is a string, and must be a valid identifier. Alternatively, the variable may be a regular expression which matches the names of such macros. Such a noise macro is treated as whitespace by @ccmode{}. It must not also be in, or be matched by @code{c-noise-macro-with-parens-names}. @end defopt @defopt c-noise-macro-with-parens-names @vindex noise-macro-with-parens-names @r{(c-)} This variable is a list of names of noise macros which optionally have arguments in parentheses. Each element of the list is a string, and must be a valid identifier. Alternatively, the variable may be a regular expression which matches the names of such macros. Such a noise macro must not also be in, or be matched by @code{c-noise-macro-names}. For performance reasons, such a noise macro, including any parenthesized arguments, is specially handled, but it is only handled when used in declaration contexts@footnote{If this restriction causes your project difficulties, please get in touch with @email{bug-cc-mode@@gnu.org}.}. The two compiler directives @code{__attribute__} and @code{__declspec} have traditionally been handled specially in @ccmode{}; for example they are fontified with font-lock-keyword-face. You don't need to include these directives in @code{c-noise-macro-with-parens-names}, but doing so is OK. @end defopt @defun c-make-noise-macro-regexps @findex make-noise-macro-regexps @r{(c-)} Call this (non-interactive) function, which sets internal variables, on changing the value of @code{c-noise-macro-names} or @code{c-noise-macro-with-parens-names} after the major mode's function has run. This function is called by @ccmode{}'s initialization code, after the mode hooks have run. @end defun @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Indenting Directives @section Indenting Directives @cindex Indenting Directives @cindex Indenting #pragma @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Sometimes you may want to indent particular preprocessor directives (e.g. @code{#pragma}) as though they were statements. To do this, first set up @code{c-cpp-indent-to-body-directives} to include the directive name(s), then enable the ``indent to body'' feature with @code{c-toggle-cpp-indent-to-body}. @defopt c-cpp-indent-to-body-directives @vindex cpp-indent-to-body-directives (c-) This variable is a list of names of CPP directives (not including the introducing @samp{#}) which will be indented as though statements. Each element is a string, and must be a valid identifier. The default value is @code{("pragma")}. If you add more directives to this variable, or remove directives from it, whilst ``indent to body'' is active, you need to re-enable the feature by calling @code{c-toggle-cpp-indent-to-body} for these changes to take effect@footnote{Note that the removal of directives doesn't work satisfactorily on XEmacs or on very old versions of Emacs}. @end defopt @defun c-toggle-cpp-indent-to-body @findex toggle-cpp-indent-to-body (c-) With @kbd{M-x c-toggle-cpp-indent-to-body}, you enable or disable the ``indent to body'' feature. When called programmatically, it takes an optional numerical argument. A positive value will enable the feature, a zero or negative value will disable it. You should set up @code{c-cpp-indent-to-body-directives} before calling this function, since the function sets internal state which depends on that variable. @end defun @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Odds and Ends @chapter Odds and Ends @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! The stuff that didn't fit in anywhere else is documented here. @defopt c-require-final-newline @vindex require-final-newline @r{(c-)} Controls whether a final newline is enforced when the file is saved. The value is an association list that for each language mode specifies the value to give to @code{require-final-newline} (@pxref{Saving Buffers,,,@lispref{}, @lispreftitle{}}) at mode initialization. If a language isn't present on the association list, CC Mode won't touch @code{require-final-newline} in buffers for that language. The default is to set @code{require-final-newline} to @code{t} in the languages that mandate that source files should end with newlines. These are C, C++ and Objective-C. @end defopt @defopt c-echo-syntactic-information-p @vindex echo-syntactic-information-p @r{(c-)} If non-@code{nil}, the syntactic analysis for the current line is shown in the echo area when it's indented (unless @code{c-syntactic-indentation} is @code{nil}). That's useful when finding out which syntactic symbols to modify to get the indentation you want. @end defopt @defopt c-report-syntactic-errors @vindex report-syntactic-errors @r{(c-)} If non-@code{nil}, certain syntactic errors are reported with a ding and a message, for example when an @code{else} is indented for which there is no corresponding @code{if}. Note however that @ccmode{} doesn't make any special effort to check for syntactic errors; that's the job of the compiler. The reason it can report cases like the one above is that it can't find the correct anchoring position to indent the line in that case. @end defopt @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Sample Init File @appendix Sample Init File @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Here's a sample .emacs file fragment that might help you along the way. Just copy this region and paste it into your .emacs file. You might want to change some of the actual values. @verbatim ;; Make a non-standard key binding. We can put this in ;; c-mode-base-map because c-mode-map, c++-mode-map, and so on, ;; inherit from it. (defun my-c-initialization-hook () (define-key c-mode-base-map "\C-m" 'c-context-line-break)) (add-hook 'c-initialization-hook 'my-c-initialization-hook) ;; offset customizations not in my-c-style ;; This will take precedence over any setting of the syntactic symbol ;; made by a style. (setq c-offsets-alist '((member-init-intro . ++))) ;; Create my personal style. (defconst my-c-style '((c-tab-always-indent . t) (c-comment-only-line-offset . 4) (c-hanging-braces-alist . ((substatement-open after) (brace-list-open))) (c-hanging-colons-alist . ((member-init-intro before) (inher-intro) (case-label after) (label after) (access-label after))) (c-cleanup-list . (scope-operator empty-defun-braces defun-close-semi)) (c-offsets-alist . ((arglist-close . c-lineup-arglist) (substatement-open . 0) (case-label . 4) (block-open . 0) (knr-argdecl-intro . -))) (c-echo-syntactic-information-p . t)) "My C Programming Style") (c-add-style "PERSONAL" my-c-style) ;; Customizations for all modes in CC Mode. (defun my-c-mode-common-hook () ;; set my personal style for the current buffer (c-set-style "PERSONAL") ;; other customizations (setq tab-width 8 ;; this will make sure spaces are used instead of tabs indent-tabs-mode nil) ;; we like auto-newline, but not hungry-delete (c-toggle-auto-newline 1)) (add-hook 'c-mode-common-hook 'my-c-mode-common-hook) @end verbatim @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Performance Issues @appendix Performance Issues @cindex performance @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @comment FIXME: (ACM, 2003/5/24). Check whether AWK needs mentioning here. C and its derivative languages are highly complex creatures. Often, ambiguous code situations arise that require @ccmode{} to scan large portions of the buffer to determine syntactic context. Such pathological code can cause @ccmode{} to perform fairly badly. This section gives some insight in how @ccmode{} operates, how that interacts with some coding styles, and what you can use to improve performance. The overall goal is that @ccmode{} shouldn't be overly slow (i.e., take more than a fraction of a second) in any interactive operation. I.e., it's tuned to limit the maximum response time in single operations, which is sometimes at the expense of batch-like operations like reindenting whole blocks. If you find that @ccmode{} gradually gets slower and slower in certain situations, perhaps as the file grows in size or as the macro or comment you're editing gets bigger, then chances are that something isn't working right. You should consider reporting it, unless it's something that's mentioned in this section. Because @ccmode{} has to scan the buffer backwards from the current insertion point, and because C's syntax is fairly difficult to parse in the backwards direction, @ccmode{} often tries to find the nearest position higher up in the buffer from which to begin a forward scan (it's typically an opening or closing parenthesis of some kind). The farther this position is from the current insertion point, the slower it gets. @findex beginning-of-defun In earlier versions of @ccmode{}, we used to recommend putting the opening brace of a top-level construct@footnote{E.g., a function in C, or outermost class definition in C++ or Java.} into the leftmost column. Earlier still, this used to be a rigid Emacs constraint, as embodied in the @code{beginning-of-defun} function. @ccmode now caches syntactic information much better, so that the delay caused by searching for such a brace when it's not in column 0 is minimal, except perhaps when you've just moved a long way inside the file. @findex defun-prompt-regexp @vindex c-Java-defun-prompt-regexp @vindex Java-defun-prompt-regexp @r{(c-)} A special note about @code{defun-prompt-regexp} in Java mode: The common style is to hang the opening braces of functions and classes on the right side of the line, and that doesn't work well with the Emacs approach. @ccmode{} comes with a constant @code{c-Java-defun-prompt-regexp} which tries to define a regular expression usable for this style, but there are problems with it. In some cases it can cause @code{beginning-of-defun} to hang@footnote{This has been observed in Emacs 19.34 and XEmacs 19.15.}. For this reason, it is not used by default, but if you feel adventurous, you can set @code{defun-prompt-regexp} to it in your mode hook. In any event, setting and relying on @code{defun-prompt-regexp} will definitely slow things down because (X)Emacs will be doing regular expression searches a lot, so you'll probably be taking a hit either way! @ccmode{} maintains a cache of the opening parentheses of the blocks surrounding the point, and it adapts that cache as the point is moved around. That means that in bad cases it can take noticeable time to indent a line in a new surrounding, but after that it gets fast as long as the point isn't moved far off. The farther the point is moved, the less useful is the cache. Since editing typically is done in ``chunks'' rather than on single lines far apart from each other, the cache typically gives good performance even when the code doesn't fit the Emacs approach to finding the defun starts. @vindex c-enable-xemacs-performance-kludge-p @vindex enable-xemacs-performance-kludge-p @r{(c-)} XEmacs users can set the variable @code{c-enable-xemacs-performance-kludge-p} to non-@code{nil}. This tells @ccmode{} to use XEmacs-specific built-in functions which, in some circumstances, can locate the top-most opening brace much more quickly than @code{beginning-of-defun}. Preliminary testing has shown that for styles where these braces are hung (e.g., most JDK-derived Java styles), this hack can improve performance of the core syntax parsing routines from 3 to 60 times. However, for styles which @emph{do} conform to Emacs's recommended style of putting top-level braces in column zero, this hack can degrade performance by about as much. Thus this variable is set to @code{nil} by default, since the Emacs-friendly styles should be more common (and encouraged!). Note that this variable has no effect in Emacs since the necessary built-in functions don't exist (in Emacs 22.1 as of this writing in February 2007). Text properties are used to speed up skipping over syntactic whitespace, i.e., comments and preprocessor directives. Indenting a line after a huge macro definition can be slow the first time, but after that the text properties are in place and it should be fast (even after you've edited other parts of the file and then moved back). Font locking can be a CPU hog, especially the font locking done on decoration level 3 which tries to be very accurate. Note that that level is designed to be used with a font lock support mode that only fontifies the text that's actually shown, i.e., Lazy Lock or Just-in-time Lock mode, so make sure you use one of them. Fontification of a whole buffer with some thousand lines can often take over a minute. That is a known weakness; the idea is that it never should happen. The most effective way to speed up font locking is to reduce the decoration level to 2 by setting @code{font-lock-maximum-decoration} appropriately. That level is designed to be as pretty as possible without sacrificing performance. @xref{Font Locking Preliminaries}, for more info. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Limitations and Known Bugs @appendix Limitations and Known Bugs @cindex limitations @cindex bugs @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @itemize @bullet @item @ccmode{} doesn't support trigraphs. (These are character sequences such as @samp{??(}, which represents @samp{[}. They date from a time when some character sets didn't have all the characters that C needs, and are now utterly obsolete.) @item There is no way to apply auto newline settings (@pxref{Auto-newlines}) on already typed lines. That's only a feature to ease interactive editing. To generalize this issue a bit: @ccmode{} is not intended to be used as a reformatter for old code in some more or less batch-like way. With the exception of some functions like @code{c-indent-region}, it's only geared to be used interactively to edit new code. There's currently no intention to change this goal. If you want to reformat old code, you're probably better off using some other tool instead, e.g., @ref{Top, , GNU indent, indent, The `indent' Manual}, which has more powerful reformatting capabilities than @ccmode{}. @item The support for C++ templates (in angle brackets) is not yet complete. When a non-nested template is used in a declaration, @ccmode{} indents it and font-locks it OK@. Templates used in expressions, and nested templates do not fare so well. Sometimes a workaround is to refontify the expression after typing the closing @samp{>}. @item In a @dfn{k&r region} (the part of an old-fashioned C function declaration which specifies the types of its parameters, coming between the parameter list and the opening brace), there should be at most 20 top-level parenthesis and bracket pairs. This limit has been imposed for performance reasons. If it is violated, the source file might be incorrectly indented or fontified. @item On loading @ccmode{}, sometimes this error message appears: @example File mode specification error: (void-variable c-font-lock-keywords-3) @end example This is due to a bug in the function @code{eval-after-load} in some versions of (X)Emacs. It can manifest itself when there is a symbolic link in the path of the directory which contains (X)Emacs. As a workaround, put the following into your @file{.emacs} file, fairly early on: @example (defun my-load-cc-fonts () (require "cc-fonts")) (add-hook 'c-initialization-hook 'my-load-cc-fonts) @end example @end itemize @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node FAQ @appendix Frequently Asked Questions @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @itemize @bullet @item @emph{How can I change the indent level from 4 spaces to 2 spaces?} Set the variable @code{c-basic-offset}. @xref{Getting Started}. @item @kindex RET @kindex C-j @emph{Why does/doesn't the @kbd{@key{RET}} key indent the new line?} Emacs's convention used to be that @kbd{RET} just adds a newline, and that @kbd{C-j} adds a newline and indents it. In Emacs-24.4, this convention was reversed. If you use an older Emacs and you want @kbd{@key{RET}} do this too, add this to your @code{c-initialization-hook}: @example (define-key c-mode-base-map "\C-m" 'c-context-line-break) @end example @xref{Getting Started}. This was a very common question. @item @emph{How do I get block comments in my C++ files?} Interactively, change the comment style with @kbd{C-c C-k}. @xref{Minor Modes}. To configure this setting, say, for files within the gdb project, you could amend your C++ Mode hook like this: @example (defun my-c++-mode-hook () (if (string-match "/gdb/" (buffer-file-name)) (c-toggle-comment-style 1))) (add-hook 'c++-mode-hook 'my-c++-mode-hook) @end example @item @emph{How do I stop my C++ lambda expressions being indented way over to the right?} This is now the default, so you don't need to do anything. To restore the previous default, indenting lambda expressions to the right of the constructs which introduce them, change the offset associated with @code{inlambda} from 0 to @code{c-lineup-inexpr-block}. For example, if you are setting offsets in a hook function you might include the following line: @example (c-set-offset 'inlambda 'c-lineup-inexpr-block) @end example For details of the different ways you can make this setting, @ref{Config Basics}. @item @emph{How do I stop my code jumping all over the place when I type?} Deactivate ``electric minor mode'' with @kbd{C-c C-l}. @xref{Getting Started}. @item @kindex C-x h @kindex C-M-\ @emph{How do I reindent the whole file?} Visit the file and hit @kbd{C-x h} to mark the whole buffer. Then hit @kbd{C-M-\}. @xref{Indentation Commands}. @item @kindex C-M-q @kindex C-M-u @emph{How do I reindent the current block?} First move to the brace which opens the block with @kbd{C-M-u}, then reindent that expression with @kbd{C-M-q}. @xref{Indentation Commands}. @item @emph{I put @code{(c-set-offset 'substatement-open 0)} in my @file{.emacs} file but I get an error saying that @code{c-set-offset}'s function definition is void. What's wrong?} This means that @ccmode{} hasn't yet been loaded into your Emacs session by the time the @code{c-set-offset} call is reached, most likely because @ccmode{} is being autoloaded. Instead of putting the @code{c-set-offset} line in your top-level @file{.emacs} file, put it in your @code{c-initialization-hook} (@pxref{CC Hooks}), or simply modify @code{c-offsets-alist} directly: @example (setq c-offsets-alist '((substatement-open . 0))) @end example @item @cindex open paren in column zero @emph{I have an open paren character at column zero inside a comment or multiline string literal, and it causes the fontification and/or indentation to go haywire. What gives?} It's due to the ad-hoc rule in (X)Emacs that such open parens always start defuns (which translates to functions, classes, namespaces or any other top-level block constructs in the @ccmode{} languages). @ifset XEMACS @xref{Defuns,,, xemacs, XEmacs User's Manual}, for details. @end ifset @ifclear XEMACS @xref{Left Margin Paren,,, emacs, GNU Emacs Manual}, for details (@xref{Defuns,,, emacs, GNU Emacs Manual}, in the Emacs 20 manual). @end ifclear This heuristic is built into the core syntax analysis routines in (X)Emacs, so it's not really a @ccmode{} issue. However, in Emacs 21.1 it became possible to turn it off@footnote{Using the variable @code{open-paren-in-column-0-is-defun-start}.} and @ccmode{} does so there since it's got its own system to keep track of blocks. @end itemize @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Updating CC Mode @appendix Getting the Latest CC Mode Release @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @ccmode{} has been standard with all versions of Emacs since 19.34 and of XEmacs since 19.16. @cindex web site Due to release schedule skew, it is likely that all of these Emacsen have old versions of @ccmode{} and so should be upgraded. Access to the @ccmode{} source code, as well as more detailed information on Emacsen compatibility, etc.@: are all available on the web site: @quotation @uref{https://cc-mode.sourceforge.net/} @end quotation @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Mailing Lists and Bug Reports @appendix Mailing Lists and Submitting Bug Reports @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @kindex C-c C-b @findex c-submit-bug-report @findex submit-bug-report @r{(c-)} To report bugs, use the @kbd{C-c C-b} (bound to @code{c-submit-bug-report}) command. This provides vital information we need to reproduce your problem. Make sure you include a concise, but complete code example. Please try to boil your example down to just the essential code needed to reproduce the problem, and include an exact recipe of steps needed to expose the bug. Be especially sure to include any code that appears @emph{before} your bug example, if you think it might affect our ability to reproduce it. Please try to produce the problem in an Emacs instance without any customizations loaded (i.e., start it with the @samp{-q --no-site-file} arguments). If it works correctly there, the problem might be caused by faulty customizations in either your own or your site configuration. In that case, we'd appreciate it if you isolate the Emacs Lisp code that triggers the bug and include it in your report. @cindex bug report mailing list Reporting a bug using @code{c-submit-bug-report} files it in the GNU Bug Tracker at @url{https://debbugs.gnu.org}, then sends it on to @email{bug-cc-mode@@gnu.org}. You can also send reports, other questions, and suggestions (kudos?@: @t{;-)} to that address. It's a mailing list which you can join or browse an archive of; see the web site at @uref{https://cc-mode.sourceforge.net/} for further details. @cindex announcement mailing list If you want to get announcements of new @ccmode{} releases, send the word @emph{subscribe} in the body of a message to @email{cc-mode-announce-request@@lists.sourceforge.net}. It's possible to subscribe from the web site too. Announcements will also be posted to the Usenet newsgroups @code{gnu.emacs.sources}, @code{comp.emacs}, @code{comp.emacs.xemacs}, @code{comp.lang.c}, @code{comp.lang.c++}, @code{comp.lang.objective-c}, @code{comp.lang.java.softwaretools}, @code{comp.lang.idl}, and @code{comp.lang.awk}. @c There is no newsgroup for Pike. :-( @node GNU Free Documentation License @appendix GNU Free Documentation License @include doclicense.texi @c Removed the tentative node "Mode Initialization" from here, 2005/8/27. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Command and Function Index @unnumbered Command and Function Index @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Since most @ccmode{} commands are prepended with the string @samp{c-}, each appears under its @code{c-@var{thing}} name and its @code{@var{thing} (c-)} name. @iftex @sp 2 @end iftex @printindex fn @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Variable Index @unnumbered Variable Index @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Since most @ccmode{} variables are prepended with the string @samp{c-}, each appears under its @code{c-@var{thing}} name and its @code{@var{thing} (c-)} name. @iftex @sp 2 @end iftex @printindex vr @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @node Concept and Key Index @unnumbered Concept and Key Index @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @printindex cp @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @comment Epilogue. @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @bye