bug#466: 23.0.60; windmove.el doesnt not always switch windows in ERC

bug#466: 23.0.60; windmove.el doesnt not always switch windows in ERC

[martin rudalics]

Sorry, I apparently mangled the mail header.  Resending:

> When I am in an ERC buffer which is "touching" the bottom of my emacs session
> I can't switch to windows to the left or right. (ie the only window below it
> is the mini-buffer and the input prompt is at the bottom. Screenshot:
> http://people.cs.uct.ac.za/~smtkee002/windmoveproblem.jpg ). I have tested in
> other modes and this problem does not happen. C-x o still works.

I can't reproduce the behavior you describe here.  Could you try to
edebug `windmove-find-other-window' to find out what happens?

Thanks in advance, martin.

bug#466: 23.0.60; windmove.el doesnt not always switch windows in ERC

[Keegan Carruthers-Smith]

Hey,
I ran edebug-eval-expression on (windmove-left) and got
call-interactively: Symbol's value as variable is void: edebug-outside-windows

Hope this helps

Cheers,
  Keegan

On Thu, Aug 7, 2008 at 12:17 PM, martin rudalics <rudalics@gmx.at> wrote:
> Sorry, I apparently mangled the mail header.  Resending:
>
>> When I am in an ERC buffer which is "touching" the bottom of my emacs
>> session
>> I can't switch to windows to the left or right. (ie the only window below
>> it
>> is the mini-buffer and the input prompt is at the bottom. Screenshot:
>> http://people.cs.uct.ac.za/~smtkee002/windmoveproblem.jpg ). I have tested
>> in
>> other modes and this problem does not happen. C-x o still works.
>
> I can't reproduce the behavior you describe here.  Could you try to
> edebug `windmove-find-other-window' to find out what happens?
>
> Thanks in advance, martin.
>
>
>
>

bug#466: 23.0.60; windmove.el doesnt not always switch windows in ERC

[martin rudalics]

 > Hey,
 > I ran edebug-eval-expression on (windmove-left) and got
 > call-interactively: Symbol's value as variable is void: edebug-outside-windows
 >
 > Hope this helps

Not really.  Please try the following.  In a one-window frame do

C-x 2 C-x o C-x 3

that is your frame should appear as follows:

  -----
|     |
|-----|
|  |  |
  -----

In the lower right window display the ERC buffer, in the lower left
window the buffer you want to move to.  Next display window-move.el in
the top window, move point to the definition of
`windmove-find-other-window' and type C-u C-M-x to "instrument that
function for debugging".

Finally, go to the ERC window, and call `window-left'.  edebug should
now redirect focus to the upper window and you can type SPACE to step
through `windmove-find-other-window'.  If possible, do the same for a
non-ERC buffer in the lower right window too to tell where executions
differ.

Thanks, martin

bug#466: 23.0.60; windmove.el doesnt not always switch windows in ERC

[Keegan Carruthers-Smith]

Hey,
 I don't have window-move.el, it's defined in windmove.el
 Also, when i was debugging i had the ERC buffer running in the bottom
left corner.

When I run debug on windmove-find-other-window it doesnt give me any
output, but does take me to line 468 in windmove.el. The line is
(let* ((actual-current-window (or window (selected-window))) in the
function windmove-find-other-window

If i do the debug on windmove-right, nothing happens

I may be doing something wrong because I have never debugged lisp code
before, so could be doing it totally wrong. I am a programmer though
in C++, haskell, python and java though, so I do understand the
concepts behind debugging lisp. I'll read the info pages on edebug
sometime so I can maybe investigate the problem as well.

On Sat, Aug 9, 2008 at 11:47 AM, martin rudalics <rudalics@gmx.at> wrote:
>> Hey,
>> I ran edebug-eval-expression on (windmove-left) and got
>> call-interactively: Symbol's value as variable is void:
>> edebug-outside-windows
>>
>> Hope this helps
>
> Not really.  Please try the following.  In a one-window frame do
>
> C-x 2 C-x o C-x 3
>
> that is your frame should appear as follows:
>
>  -----
> |     |
> |-----|
> |  |  |
>  -----
>
> In the lower right window display the ERC buffer, in the lower left
> window the buffer you want to move to.  Next display window-move.el in
> the top window, move point to the definition of
> `windmove-find-other-window' and type C-u C-M-x to "instrument that
> function for debugging".
>
> Finally, go to the ERC window, and call `window-left'.  edebug should
> now redirect focus to the upper window and you can type SPACE to step
> through `windmove-find-other-window'.  If possible, do the same for a
> non-ERC buffer in the lower right window too to tell where executions
> differ.
>
> Thanks, martin
>

bug#466: 23.0.60; windmove.el doesnt not always switch windows in ERC

[ＯＦＦＩＣＥ ZERO]

no thank you
----- Original Message ----- 
From: "Keegan Carruthers-Smith" <keegan.csmith@gmail.com>
To: <466@emacsbugs.donarmstrong.com>
Sent: Saturday, August 09, 2008 7:39 PM
Subject: bug#466: 23.0.60;windmove.el doesnt not always switch windows in 
ERC


> Hey,
> I don't have window-move.el, it's defined in windmove.el
> Also, when i was debugging i had the ERC buffer running in the bottom
> left corner.
>
> When I run debug on windmove-find-other-window it doesnt give me any
> output, but does take me to line 468 in windmove.el. The line is
> (let* ((actual-current-window (or window (selected-window))) in the
> function windmove-find-other-window
>
> If i do the debug on windmove-right, nothing happens
>
> I may be doing something wrong because I have never debugged lisp code
> before, so could be doing it totally wrong. I am a programmer though
> in C++, haskell, python and java though, so I do understand the
> concepts behind debugging lisp. I'll read the info pages on edebug
> sometime so I can maybe investigate the problem as well.
>
> On Sat, Aug 9, 2008 at 11:47 AM, martin rudalics <rudalics@gmx.at> wrote:
>>> Hey,
>>> I ran edebug-eval-expression on (windmove-left) and got
>>> call-interactively: Symbol's value as variable is void:
>>> edebug-outside-windows
>>>
>>> Hope this helps
>>
>> Not really.  Please try the following.  In a one-window frame do
>>
>> C-x 2 C-x o C-x 3
>>
>> that is your frame should appear as follows:
>>
>>  -----
>> |     |
>> |-----|
>> |  |  |
>>  -----
>>
>> In the lower right window display the ERC buffer, in the lower left
>> window the buffer you want to move to.  Next display window-move.el in
>> the top window, move point to the definition of
>> `windmove-find-other-window' and type C-u C-M-x to "instrument that
>> function for debugging".
>>
>> Finally, go to the ERC window, and call `window-left'.  edebug should
>> now redirect focus to the upper window and you can type SPACE to step
>> through `windmove-find-other-window'.  If possible, do the same for a
>> non-ERC buffer in the lower right window too to tell where executions
>> differ.
>>
>> Thanks, martin
>>
>
>
>
> 

bug#466: Info received (bug#466: 23.0.60; windmove.el doesnt not always switch windows in ERC)

[ＯＦＦＩＣＥ ZERO]

no thank you


----- Original Message ----- 
From: "Emacs bug Tracking System" <don@donarmstrong.com>
To: "ＯＦＦＩＣＥ　ZERO" <hi-oh230@air.ocn.ne.jp>
Sent: Saturday, August 09, 2008 8:05 PM
Subject: bug#466: Info received (bug#466: 23.0.60;windmove.el doesnt not 
always switch windows in ERC)



Thank you for the additional information you have supplied regarding
this bug report.

This is an automatically generated reply to let you know your message
has been received.

Your message is being forwarded to the package maintainers and other
interested parties for their attention; they will reply in due course.

Your message has been sent to the package maintainer(s):
 Emacs Bugs <bug-gnu-emacs@gnu.org>

If you wish to submit further information on this problem, please
send it to 466@emacsbugs.donarmstrong.com, as before.

Please do not send mail to don@donarmstrong.com unless you wish
to report a problem with the Bug-tracking system.


-- 
466: http://emacsbugs.donarmstrong.com/cgi-bin/bugreport.cgi?bug=466
Emacs Bug Tracking System
Contact don@donarmstrong.com with problems 

bug#466: Info received (bug#466: Info received (bug#466: 23.0.60; windmove.el doesnt not always switch windows in ERC))

[ＯＦＦＩＣＥ ZERO]

no thank you


----- Original Message ----- 
From: "Emacs bug Tracking System" <don@donarmstrong.com>
To: "ＯＦＦＩＣＥ　ZERO" <hi-oh230@air.ocn.ne.jp>
Sent: Saturday, August 09, 2008 9:20 PM
Subject: bug#466: Info received (bug#466: Info received (bug#466: 
23.0.60;windmove.el doesnt not always switch windows in ERC))



Thank you for the additional information you have supplied regarding
this bug report.

This is an automatically generated reply to let you know your message
has been received.

Your message is being forwarded to the package maintainers and other
interested parties for their attention; they will reply in due course.

Your message has been sent to the package maintainer(s):
 Emacs Bugs <bug-gnu-emacs@gnu.org>

If you wish to submit further information on this problem, please
send it to 466@emacsbugs.donarmstrong.com, as before.

Please do not send mail to don@donarmstrong.com unless you wish
to report a problem with the Bug-tracking system.


-- 
466: http://emacsbugs.donarmstrong.com/cgi-bin/bugreport.cgi?bug=466
Emacs Bug Tracking System
Contact don@donarmstrong.com with problems 

bug#466: 23.0.60; windmove.el doesnt not always switch windows in ERC

[ＯＦＦＩＣＥ ZERO]

Do'nt   send  me mail  !!!
no tkank you!!

----- Original Message ----- 
From: "Keegan Carruthers-Smith" <keegan.csmith@gmail.com>
To: <466@emacsbugs.donarmstrong.com>
Sent: Saturday, August 09, 2008 7:39 PM
Subject: bug#466: 23.0.60;windmove.el doesnt not always switch windows in 
ERC


> Hey,
> I don't have window-move.el, it's defined in windmove.el
> Also, when i was debugging i had the ERC buffer running in the bottom
> left corner.
>
> When I run debug on windmove-find-other-window it doesnt give me any
> output, but does take me to line 468 in windmove.el. The line is
> (let* ((actual-current-window (or window (selected-window))) in the
> function windmove-find-other-window
>
> If i do the debug on windmove-right, nothing happens
>
> I may be doing something wrong because I have never debugged lisp code
> before, so could be doing it totally wrong. I am a programmer though
> in C++, haskell, python and java though, so I do understand the
> concepts behind debugging lisp. I'll read the info pages on edebug
> sometime so I can maybe investigate the problem as well.
>
> On Sat, Aug 9, 2008 at 11:47 AM, martin rudalics <rudalics@gmx.at> wrote:
>>> Hey,
>>> I ran edebug-eval-expression on (windmove-left) and got
>>> call-interactively: Symbol's value as variable is void:
>>> edebug-outside-windows
>>>
>>> Hope this helps
>>
>> Not really.  Please try the following.  In a one-window frame do
>>
>> C-x 2 C-x o C-x 3
>>
>> that is your frame should appear as follows:
>>
>>  -----
>> |     |
>> |-----|
>> |  |  |
>>  -----
>>
>> In the lower right window display the ERC buffer, in the lower left
>> window the buffer you want to move to.  Next display window-move.el in
>> the top window, move point to the definition of
>> `windmove-find-other-window' and type C-u C-M-x to "instrument that
>> function for debugging".
>>
>> Finally, go to the ERC window, and call `window-left'.  edebug should
>> now redirect focus to the upper window and you can type SPACE to step
>> through `windmove-find-other-window'.  If possible, do the same for a
>> non-ERC buffer in the lower right window too to tell where executions
>> differ.
>>
>> Thanks, martin
>>
>
>
>
> 

bug#466: 23.0.60; windmove.el doesnt not always switch windows in ERC

[ＯＦＦＩＣＥ ZERO]

Do'nt   send  me mail  !!!
no tkank you!!

----- Original Message ----- 
From: "Keegan Carruthers-Smith" <keegan.csmith@gmail.com>
To: <466@emacsbugs.donarmstrong.com>
Sent: Saturday, August 09, 2008 7:39 PM
Subject: bug#466: 23.0.60;windmove.el doesnt not always switch windows in 
ERC


> Hey,
> I don't have window-move.el, it's defined in windmove.el
> Also, when i was debugging i had the ERC buffer running in the bottom
> left corner.
>
> When I run debug on windmove-find-other-window it doesnt give me any
> output, but does take me to line 468 in windmove.el. The line is
> (let* ((actual-current-window (or window (selected-window))) in the
> function windmove-find-other-window
>
> If i do the debug on windmove-right, nothing happens
>
> I may be doing something wrong because I have never debugged lisp code
> before, so could be doing it totally wrong. I am a programmer though
> in C++, haskell, python and java though, so I do understand the
> concepts behind debugging lisp. I'll read the info pages on edebug
> sometime so I can maybe investigate the problem as well.
>
> On Sat, Aug 9, 2008 at 11:47 AM, martin rudalics <rudalics@gmx.at> wrote:
>>> Hey,
>>> I ran edebug-eval-expression on (windmove-left) and got
>>> call-interactively: Symbol's value as variable is void:
>>> edebug-outside-windows
>>>
>>> Hope this helps
>>
>> Not really.  Please try the following.  In a one-window frame do
>>
>> C-x 2 C-x o C-x 3
>>
>> that is your frame should appear as follows:
>>
>>  -----
>> |     |
>> |-----|
>> |  |  |
>>  -----
>>
>> In the lower right window display the ERC buffer, in the lower left
>> window the buffer you want to move to.  Next display window-move.el in
>> the top window, move point to the definition of
>> `windmove-find-other-window' and type C-u C-M-x to "instrument that
>> function for debugging".
>>
>> Finally, go to the ERC window, and call `window-left'.  edebug should
>> now redirect focus to the upper window and you can type SPACE to step
>> through `windmove-find-other-window'.  If possible, do the same for a
>> non-ERC buffer in the lower right window too to tell where executions
>> differ.
>>
>> Thanks, martin
>>
>
>
>
> 

bug#466: 23.0.60; windmove.el doesnt not always switch windows in ERC

[ＯＦＦＩＣＥ ZERO]

no thank you
----- Original Message ----- 
From: "martin rudalics" <rudalics@gmx.at>
To: "Keegan Carruthers-Smith" <keegan.csmith@gmail.com>
Cc: <466@emacsbugs.donarmstrong.com>
Sent: Saturday, August 09, 2008 6:47 PM
Subject: bug#466: 23.0.60;windmove.el doesnt not always switch windows in 
ERC


> > Hey,
> > I ran edebug-eval-expression on (windmove-left) and got
> > call-interactively: Symbol's value as variable is void: 
> > edebug-outside-windows
> >
> > Hope this helps
>
> Not really.  Please try the following.  In a one-window frame do
>
> C-x 2 C-x o C-x 3
>
> that is your frame should appear as follows:
>
>  -----
> |     |
> |-----|
> |  |  |
>  -----
>
> In the lower right window display the ERC buffer, in the lower left
> window the buffer you want to move to.  Next display window-move.el in
> the top window, move point to the definition of
> `windmove-find-other-window' and type C-u C-M-x to "instrument that
> function for debugging".
>
> Finally, go to the ERC window, and call `window-left'.  edebug should
> now redirect focus to the upper window and you can type SPACE to step
> through `windmove-find-other-window'.  If possible, do the same for a
> non-ERC buffer in the lower right window too to tell where executions
> differ.
>
> Thanks, martin
>
>
>
> 

bug#466: Info received (bug#466: 23.0.60; windmove.el doesnt not always switch windows in ERC)

[ＯＦＦＩＣＥ ZERO]

no thank you




----- Original Message ----- 
From: "Emacs bug Tracking System" <don@donarmstrong.com>
To: "ＯＦＦＩＣＥ　ZERO" <hi-oh230@air.ocn.ne.jp>
Sent: Saturday, August 09, 2008 8:05 PM
Subject: bug#466: Info received (bug#466: 23.0.60;windmove.el doesnt not 
always switch windows in ERC)



Thank you for the additional information you have supplied regarding
this bug report.

This is an automatically generated reply to let you know your message
has been received.

Your message is being forwarded to the package maintainers and other
interested parties for their attention; they will reply in due course.

Your message has been sent to the package maintainer(s):
 Emacs Bugs <bug-gnu-emacs@gnu.org>

If you wish to submit further information on this problem, please
send it to 466@emacsbugs.donarmstrong.com, as before.

Please do not send mail to don@donarmstrong.com unless you wish
to report a problem with the Bug-tracking system.


-- 
466: http://emacsbugs.donarmstrong.com/cgi-bin/bugreport.cgi?bug=466
Emacs Bug Tracking System
Contact don@donarmstrong.com with problems 

bug#466: Info received (bug#466: Info received (bug#466: 23.0.60; windmove.el doesnt not always switch windows in ERC))

[ＯＦＦＩＣＥ ZERO]

no thank you


----- Original Message ----- 
From: "Emacs bug Tracking System" <don@donarmstrong.com>
To: "ＯＦＦＩＣＥ　ZERO" <hi-oh230@air.ocn.ne.jp>
Sent: Saturday, August 09, 2008 9:20 PM
Subject: bug#466: Info received (bug#466: Info received (bug#466: 
23.0.60;windmove.el doesnt not always switch windows in ERC))



Thank you for the additional information you have supplied regarding
this bug report.

This is an automatically generated reply to let you know your message
has been received.

Your message is being forwarded to the package maintainers and other
interested parties for their attention; they will reply in due course.

Your message has been sent to the package maintainer(s):
 Emacs Bugs <bug-gnu-emacs@gnu.org>

If you wish to submit further information on this problem, please
send it to 466@emacsbugs.donarmstrong.com, as before.

Please do not send mail to don@donarmstrong.com unless you wish
to report a problem with the Bug-tracking system.


-- 
466: http://emacsbugs.donarmstrong.com/cgi-bin/bugreport.cgi?bug=466
Emacs Bug Tracking System
Contact don@donarmstrong.com with problems 

bug#466: Info received (bug#466: Info received (bug#466: Info received (bug#466: 23.0.60; windmove.el doesnt not always switch windows in ERC)))

[ＯＦＦＩＣＥ ZERO]

Do'nt   send  me mail  !!!

----- Original Message ----- 
From: "Emacs bug Tracking System" <don@donarmstrong.com>
To: "ＯＦＦＩＣＥ　ZERO" <hi-oh230@air.ocn.ne.jp>
Sent: Saturday, August 09, 2008 10:25 PM
Subject: bug#466: Info received (bug#466: Info received (bug#466: Info 
received (bug#466: 23.0.60;windmove.el doesnt not always switch windows in 
ERC)))



Thank you for the additional information you have supplied regarding
this bug report.

This is an automatically generated reply to let you know your message
has been received.

Your message is being forwarded to the package maintainers and other
interested parties for their attention; they will reply in due course.

Your message has been sent to the package maintainer(s):
 Emacs Bugs <bug-gnu-emacs@gnu.org>

If you wish to submit further information on this problem, please
send it to 466@emacsbugs.donarmstrong.com, as before.

Please do not send mail to don@donarmstrong.com unless you wish
to report a problem with the Bug-tracking system.


-- 
466: http://emacsbugs.donarmstrong.com/cgi-bin/bugreport.cgi?bug=466
Emacs Bug Tracking System
Contact don@donarmstrong.com with problems 

bug#466: Info received (bug#466: Info received (bug#466: Info received (bug#466: Info received (bug#466: 23.0.60; windmove.el doesnt not always switch windows in ERC))))

[ＯＦＦＩＣＥ ZERO]

Do'nt   send  me mail  !!!
no tkank you!!

----- Original Message ----- 
From: "Emacs bug Tracking System" <don@donarmstrong.com>
To: "ＯＦＦＩＣＥ　ZERO" <hi-oh230@air.ocn.ne.jp>
Sent: Saturday, August 09, 2008 11:00 PM
Subject: bug#466: Info received (bug#466: Info received (bug#466: Info 
received (bug#466: Info received (bug#466: 23.0.60;windmove.el doesnt not 
always switch windows in ERC))))



Thank you for the additional information you have supplied regarding
this bug report.

This is an automatically generated reply to let you know your message
has been received.

Your message is being forwarded to the package maintainers and other
interested parties for their attention; they will reply in due course.

Your message has been sent to the package maintainer(s):
 Emacs Bugs <bug-gnu-emacs@gnu.org>

If you wish to submit further information on this problem, please
send it to 466@emacsbugs.donarmstrong.com, as before.

Please do not send mail to don@donarmstrong.com unless you wish
to report a problem with the Bug-tracking system.


-- 
466: http://emacsbugs.donarmstrong.com/cgi-bin/bugreport.cgi?bug=466
Emacs Bug Tracking System
Contact don@donarmstrong.com with problems 

bug#466: 23.0.60; windmove.el doesnt not always switch windows in ERC

[ＯＦＦＩＣＥ ZERO]

Do'nt   send  me mail  !!!
no tkank you!!

----- Original Message ----- 
From: "martin rudalics" <rudalics@gmx.at>
To: "Keegan Carruthers-Smith" <keegan.csmith@gmail.com>
Cc: <466@emacsbugs.donarmstrong.com>
Sent: Saturday, August 09, 2008 6:47 PM
Subject: bug#466: 23.0.60;windmove.el doesnt not always switch windows in 
ERC


> > Hey,
> > I ran edebug-eval-expression on (windmove-left) and got
> > call-interactively: Symbol's value as variable is void: 
> > edebug-outside-windows
> >
> > Hope this helps
>
> Not really.  Please try the following.  In a one-window frame do
>
> C-x 2 C-x o C-x 3
>
> that is your frame should appear as follows:
>
>  -----
> |     |
> |-----|
> |  |  |
>  -----
>
> In the lower right window display the ERC buffer, in the lower left
> window the buffer you want to move to.  Next display window-move.el in
> the top window, move point to the definition of
> `windmove-find-other-window' and type C-u C-M-x to "instrument that
> function for debugging".
>
> Finally, go to the ERC window, and call `window-left'.  edebug should
> now redirect focus to the upper window and you can type SPACE to step
> through `windmove-find-other-window'.  If possible, do the same for a
> non-ERC buffer in the lower right window too to tell where executions
> differ.
>
> Thanks, martin
>
>
>
> 

bug#466: 23.0.60; windmove.el doesnt not always switch windows in ERC

[ＯＦＦＩＣＥ ZERO]

Do'nt   send  me mail  !!!
no tkank you!!

----- Original Message ----- 
From: "martin rudalics" <rudalics@gmx.at>
To: "Keegan Carruthers-Smith" <keegan.csmith@gmail.com>
Cc: <466@emacsbugs.donarmstrong.com>
Sent: Saturday, August 09, 2008 6:47 PM
Subject: bug#466: 23.0.60;windmove.el doesnt not always switch windows in 
ERC


> > Hey,
> > I ran edebug-eval-expression on (windmove-left) and got
> > call-interactively: Symbol's value as variable is void: 
> > edebug-outside-windows
> >
> > Hope this helps
>
> Not really.  Please try the following.  In a one-window frame do
>
> C-x 2 C-x o C-x 3
>
> that is your frame should appear as follows:
>
>  -----
> |     |
> |-----|
> |  |  |
>  -----
>
> In the lower right window display the ERC buffer, in the lower left
> window the buffer you want to move to.  Next display window-move.el in
> the top window, move point to the definition of
> `windmove-find-other-window' and type C-u C-M-x to "instrument that
> function for debugging".
>
> Finally, go to the ERC window, and call `window-left'.  edebug should
> now redirect focus to the upper window and you can type SPACE to step
> through `windmove-find-other-window'.  If possible, do the same for a
> non-ERC buffer in the lower right window too to tell where executions
> differ.
>
> Thanks, martin
>
>
>
> 

bug#466: 23.0.60; windmove.el doesnt not always switch windows in ERC

[Lars Magne Ingebrigtsen]

martin rudalics <rudalics@gmx.at> writes:

> Not really.  Please try the following.  In a one-window frame do
>
> C-x 2 C-x o C-x 3
>
> that is your frame should appear as follows:
>
>  -----
> |     |
> |-----|
> |  |  |
>  -----

More information was requested three years ago, but apparently wasn't
given, so I'm closing this bug report.  Please reopen if it's still
valid.

-- 
(domestic pets only, the antidote for overdose, milk.)
  bloggy blog http://lars.ingebrigtsen.no/

bug#466: 23.0.60; windmove.el doesnt not always switch windows in ERC

[ＯＦＦＩＣＥ ZERO]

Do'nt   send  me mail  !!!
no tkank you!!

----- Original Message ----- 
From: "Keegan Carruthers-Smith" <keegan.csmith@gmail.com>
To: "martin rudalics" <rudalics@gmx.at>
Cc: <466@emacsbugs.donarmstrong.com>
Sent: Saturday, August 09, 2008 8:39 AM
Subject: bug#466: 23.0.60;windmove.el doesnt not always switch windows in 
ERC


> Hey,
> I ran edebug-eval-expression on (windmove-left) and got
> call-interactively: Symbol's value as variable is void: 
> edebug-outside-windows
>
> Hope this helps
>
> Cheers,
>  Keegan
>
> On Thu, Aug 7, 2008 at 12:17 PM, martin rudalics <rudalics@gmx.at> wrote:
>> Sorry, I apparently mangled the mail header.  Resending:
>>
>>> When I am in an ERC buffer which is "touching" the bottom of my emacs
>>> session
>>> I can't switch to windows to the left or right. (ie the only window 
>>> below
>>> it
>>> is the mini-buffer and the input prompt is at the bottom. Screenshot:
>>> http://people.cs.uct.ac.za/~smtkee002/windmoveproblem.jpg ). I have 
>>> tested
>>> in
>>> other modes and this problem does not happen. C-x o still works.
>>
>> I can't reproduce the behavior you describe here.  Could you try to
>> edebug `windmove-find-other-window' to find out what happens?
>>
>> Thanks in advance, martin.
>>
>>
>>
>>
>
>
>
> 

bug#466: 23.0.60; windmove.el doesnt not always switch windows in ERC

[Keegan Carruthers-Smith]

When I am in an ERC buffer which is "touching" the bottom of my emacs session
I can't switch to windows to the left or right. (ie the only window below it
is the mini-buffer and the input prompt is at the bottom. Screenshot:
http://people.cs.uct.ac.za/~smtkee002/windmoveproblem.jpg ). I have tested in
other modes and this problem does not happen. C-x o still works.


In GNU Emacs 23.0.60.1 (i686-pc-linux-gnu, GTK+ Version 2.12.9)
 of 2008-06-17 on zero
Windowing system distributor `The X.Org Foundation', version 11.0.10300000
configured using `configure  '--prefix=/usr' '--host=i686-pc-linux-gnu' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--datadir=/usr/share' '--sysconfdir=/etc' '--localstatedir=/var/lib' '--program-suffix=-emacs-23' '--infodir=/usr/share/info/emacs-23' '--without-carbon' '--without-sound' '--with-x' '--without-toolkit-scroll-bars' '--with-gif' '--with-jpeg' '--with-png' '--with-rsvg' '--with-tiff' '--with-xpm' '--enable-font-backend' '--with-freetype' '--with-xft' '--without-libotf' '--without-m17n-flt' '--with-x-toolkit=gtk' '--without-hesiod' '--without-kerberos' '--without-kerberos5' '--with-gpm' '--with-dbus' '--build=i686-pc-linux-gnu' 'build_alias=i686-pc-linux-gnu' 'host_alias=i686-pc-linux-gnu' 'CFLAGS=-O2 -march=pentium3 -pipe''

Important settings:
  value of $LC_ALL: en_US.utf8
  value of $LC_COLLATE: nil
  value of $LC_CTYPE: nil
  value of $LC_MESSAGES: nil
  value of $LC_MONETARY: nil
  value of $LC_NUMERIC: nil
  value of $LC_TIME: nil
  value of $LANG: en_US.utf8
  value of $XMODIFIERS: nil
  locale-coding-system: utf-8-unix
  default-enable-multibyte-characters: t

Major mode: ERC

Minor modes in effect:
  shell-dirtrack-mode: t
  erc-list-mode: t
  erc-menu-mode: t
  erc-autojoin-mode: t
  erc-networks-mode: t
  erc-pcomplete-mode: t
  erc-button-mode: t
  display-time-mode: t
  show-paren-mode: t
  erc-truncate-mode: t
  erc-spelling-mode: t
  flyspell-mode: t
  erc-netsplit-mode: t
  erc-ring-mode: t
  erc-fill-mode: t
  erc-stamp-mode: t
  erc-track-mode: t
  erc-track-minor-mode: t
  erc-match-mode: t
  erc-irccontrols-mode: t
  erc-noncommands-mode: t
  erc-move-to-prompt-mode: t
  erc-readonly-mode: t
  erc-scrolltobottom-mode: t
  tooltip-mode: t
  mouse-wheel-mode: t
  file-name-shadow-mode: t
  global-font-lock-mode: t
  font-lock-mode: t
  blink-cursor-mode: t
  global-auto-composition-mode: t
  auto-composition-mode: t
  auto-encryption-mode: t
  auto-compression-mode: t
  column-number-mode: t
  line-number-mode: t
  transient-mark-mode: t

Recent input:
<up> <up> <up> C-x k <return> <down> <down> <down> 
<down> <down> <down> <down> <down> <down> <down> <down> 
<down> <down> <down> <down> <down> <down> <down> <down> 
<up> <up> <right> <right> <return> <down> <down> <down> 
<down> <down> <down> <down> <down> <down> <down> <down> 
<down> <down> <down> <down> <down> <down> <down> <down> 
<down> <down> <down> <down> <down> <down> <down> ] 
] <down> <down> <down> <down> <down> <down> <down> 
<down> <down> <down> <down> <down> <down> <down> <down> 
<down> <down> <down> <down> <down> <down> <down> <down> 
<down> <down> <down> <down> <down> <down> <down> <down> 
<down> <down> M-x r e p o <tab> r <tab> <return> w 
i n d m o v e SPC d o e s SPC n o t SPC a l w a y s 
SPC n a v i a g e <backspace> <backspace> <backspace> 
g a t e SPC p r o p e r l y <backspace> <backspace> 
<backspace> <backspace> e r l y <backspace> <backspace> 
<backspace> <backspace> <backspace> <backspace> <backspace> 
<backspace> <backspace> <backspace> <backspace> <backspace> 
<backspace> <backspace> <backspace> <backspace> <backspace> 
s w i t c h SPC w i n d o w s <return> <down> <next> 
<up> <down> <down> <down> <down> <down> <down> <down> 
<down> <down> <down> <down> <down> <down> <down> <down> 
<down> <down> <down> <down> <down> <down> <down> <down> 
<down> <down> <down> <down> <down> <down> <down> <down> 
<down> <down> <down> <down> <down> <down> <down> <down> 
<down> <down> <down> <down> <down> <down> <down> <down> 
<down> <down> <down> <down> <down> <down> <down> <down> 
<down> <down> <down> <down> <up> <up> <up> <up> <up> 
<up> <up> <up> <up> <up> <up> <up> <up> C-x k <return> 
C-x k <return> C-x b C-g <S-right> <S-right> C-x b 
C-g C-x o C-x b o t <backspace> r g SPC a <return> 
<S-left> <S-right> M-x r e p o <tab> r <tab> <retu
rn>

Recent messages:
Making completion list...
Quit [2 times]
Note: file is write protected
View mode: type C-h for help, h for commands, q to quit.
Mark saved where search started
call-interactively: Beginning of buffer [9 times]
bunzip2ing emacs-6.info.bz2...done
Making completion list...
Quit [2 times]
Making completion list...